Professional Documents
Culture Documents
STOP relay
NST-2009
+ Ub - Reset
• Internal / external redundancy (for two-pole E-stop)
• Manual, automatic and monitored reset A1 A2 T10 T11 T12 T21 T22 T33 T34 T35 13 23 51 33 43
F1
K1
User’s advantages:
Monitoring logic K2
• Performance level e
K3
K1 K2 K3 K4
• STOP category 0
K4
• 2-channel operation with short circuit protection
• 1-channel operation 14 24 52 34 44
2 0 1 0
Operation description Montored reset is achived by using T33 and T34 as reset and K2 go off. After the delay time the safety outputs 33-34
terminals. and 43-44 are opened and the LED’s K3(d) and K4(d) will
The reset and emergency stop input terminals T33, T34, Normal reset can be applied when wiring T34-T35. be extinguished.
T35, T10, T11, T12, T21, T22 are to be wired according the Automatic reset is achieved by using T34 and T35 which NST-2009 will reset again if the input contacts are closed
needs (see connection examples). After the supply voltage is must be bridged. (and the time delay has run out) contacts LED’s K1, K2,
applied to terminals A 1 and A2, the power LED illuminates. Assuming no internal faults are detected, the relay will reset. K3(t) and K4(t) will illuminate again.
The contacts T11 and T21 provide 24 V DC and are moni- LED’s K1, K2, K3(t) and K4(t) will be illuminated. The time delay only can be changed when the power sup-
tored for short circuit. T11 and T21 are to be used according If emergency stop contacts opens, then the safety outputs ply is off.
the connection examples. 13–14 and 23–24 will also open immediately. The LED’s K1
Electrical data
Supply voltage A1 A2 T10 T11 T12 T21 T22 T33 T34 T35 13 23 51 33 43
24V AC/DC
(NB! Common Power Supply)
Voltage range 0,80 ...1,1 UB
Frequency (AC-type) 50 ... 60 Hz NST-2009
Power consumption 200mA
Conductor data
14 24 52 34 44
Max. cross section of conductor,
Solid thread: 2 x 1,5 mm2 2-channel operation
Multiwire with ferrule: 2 x 1,5 mm2
+ Ub -
Cable type 60/75°C copper wire only E-Stop Reset
Housing material Polyamid PA 6.6 A1 A2 T10 T11 T12 T21 T22 T33 T34 T35 13 23 51 33 43
Enclosure rating, Terminals, Housing IP 20 (DIN VDE 0470); IP 40 (DIN VDE 0470) N(-)
DC 99% high
CCF achieved
A1 A2 T10 T11 T12 T21 T22 T33 T34 T35 13 23 51 33 43
Order information:
Description Article no.
NST-2009
NST-2009D 24V AC/DC 42080021
14 24 52 34 44
Duelco A/S - Aalborg Duelco A/S - Sønderborg Tel. +45 7010 1007
Systemvej 8 Mommarkvej 5 Fax: +45 7010 1008
DK-9200 Aalborg SV DK-6400 Sønderborg www.duelco-safety.com
info@duelco.dk