SU SU ahS
DISC
PHONOGRAPH RECORDS
FOR HOME USE
Bulletin No. E 4
Also Includes:
STANDARD RECORDING
AND
REPRODUCING CHARACTERISTIC
Bulletin No. E 1
fesign and as-
imply quality
RECORDING INDUSTRY ASSOCIATION OF AMERICA, INC.
ONE EAST 57TH STREET
NEW YORK, N.Y. 10022DESCRIPTION
R. 1. A. A. DIMENSIONAL CHARACTERISTICS
33/3 RPM PHONOGRAPH RECORDS FOR HOME USE
7” Records 10” Records
(mitirneters)
Inches (mtimeters) Inches
12" Records
(nitimetars) inches
Outside Diameter
Thickness
a. Flush Design
b. Contour Design
(See drawings)
(174.6 +.8mm)
9 +.3mm|
= 4mm)
6.875 =0.031"" | (250.8 +.8mm) 9.875 +0.031"
075 +.010" | (1.9 +.3mm) 075" +010"
ons"
Fig. 2; Fig. 3 Figure 1
(01.6 =.8mm) 11.875 +0.031”
(1.9 2.3mm) 075" =.010"
Figure 1
Center Hole Diameter
Center of Gravity
Max. Balance Dia.
Concentric with Hole
‘Lead:in Spiral
a. To start at record
edge
. Grooves per inch
. Contour to be same
as recording grooves
NOTE: n adition, there
shallbe atleast one
modulated
‘Groove at recording
pith
Margin Diameter,
the outer set-down limit
of reproducing stylus.
Diameter of Outermost
Groove at Recording
Piteh
Recording Groove
Contour
2, Included Angle
b. Bottom Radius
«. Width—Monophonic
4, Width—Stereophonic—
Instantaneous
Minimum inside Diameter
‘of Recording
(Same as 10”)
(H.1mm)
(Same as 10")
(172.2mm)
(168.3mm)
(Same as 10”)
{Same as 10”)
(Same as 10”)
(Same as 10”)
(108mm)
7.26 +.025mm) 0.286 "-+0.001"
=.05mm 0.002"
0.437” (1.1mm) 0.437"
6.781" (246.8mm) 9.719"
6.625" MAX | (241.3mm) ———9.500"MAX
wre
(0.006mm) —_0,00025""max.
(0.056mm) 0.0022"
(0.025mm) 10010" min.
4.250" (120.6mm) 4.750"
(Same as 10”)
(1.1mm) 0.437"
(Same as 10")
(297.6mm) 11.719"
(292.1mm) 11.500" MAK
(Same as 10”)
(Same as 10”)
(Same as 10”)
{Same as 10")
(Same as 10")
Dimensional Standards / Revised November 6 1978 / Recording Industry of America Inc.R. 1. A. A. DIMENSIONAL CHARACTERISTICS
33% RPM PHONOGRAPH RECORDS FOR HOME USE
DESCRIPTION 7” Records
(mitimetors) Inches
10” Records
{mitimeters) inches
12” Records
(eitimetore)
Inches
Runout of Recording
Grooves Related to
Center Hole
Note: This TIR measurement
Isto beindopendent of
reeordng pitch
(Same as 10")
Lead-out Spiral
‘Note: The number of grooves
per inch shallbe so
chosen that the spiral
contains at east one
complete revolution.
(Same as 10")
Stopping Groove,
Closed Concentric Circle
2. Diameter ( 98.44 smn) 3.875-0.000"
2mm -0.078
b. width (Same as 10”)
Direction of Rotation—
Clockwise, when observer
‘aces side of record
being played.
Rotational Speed 3-1/3 RPM
with 60 Hz line freq,
max speed error 0.5%
Crossover Spiral
‘The number of grooves:
joining successive bands
‘on a record shall not
be less than 16 per inch,
(041mm) 0.016" MAXTIR,
2t06 groovessinch
(106.4::.8mm) — 4.187=0.031"
(.08) 0.003”
3-1/3 RPM
Dimensional Standards / Revised November 6 1978 / Recording Industry of America Inc.
(Same as 10”)
(Same as 10")
{Same as 10”)
(Same as 10”)
38-1/8 or 45RPM