You are on page 1of 2

Quick Install Guide

Package Contents QRS Mobile App for iOS Device


Scan this QR code using your iOS mobile
device. You will be directed to the App
All-in-One Mobile Companion
store to download the QRS Mobile App
so that you may begin the Installation
process.
Ethernet Cable

All-in-One Mobile Companion If any of the above items are missing, please contact your
reseller.
SharePort Mobile App for iOS Device
Scan this QR code using your iOS
LEDs mobile device to download the App
and begin file sharing.
Power LED - A solid green light indicates
a proper connection to the power Requirements: Compatible with
supply. The light will be solid red during iPhone, iPod touch and iPad.
boot up and during a factory reset. Requires iOS 4.3 or later.
DIR-505
Pleaser refer to the user manual for further Note: The SharePort Mobile App only
information regarding SharePort Mobile works on Router and Wi-Fi Hotspot
App. Please download the user manual from Mode.
http://www.dlink.com/support/

Start Here - Select The Mode


Router Mode AP Mode Repeater Mode Wi-Fi Hotspot Mode
This feature behaves as a router in areas where Use Access Point (AP) mode if you want to connect This feature extends your wireless coverage allowing This feature allows you to have your own private
you cannot take your home router so that you may wireless clients (such as laptops, tablets, smartphones, you to share your wireless signal with all your portable network from anywhere that you may travel.
wirelessly connect to the internet. and media players) to your wired network (via router,
switch, or PowerLine devices).
Start Here
devices such as your mobile device or laptop.

QRS Mobile Setup For Router Mode ( iPhone and iPad Only)
1 2 Router/AP
3 4 5 6 7
90mm

D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note


Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: “Admin” Username: Admin
Password: ““ (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm dlinka8fa Wi- Fi Name (SSID) :

Ethernet
OutletEthernet
Outlet
Wi-Fi Password :
akbdj19368 Wi-Fi Password :

Settings

Scan the QRS Mobile code Move the switch on the DIR- Wireless Utility to displays the available Once it connected, click on the QRS Please follow the on-screen Once the screen appears, you From your iOS mobile device go
to download “QRS Mobile” 505 to “Router/AP Mode” wireless networks and select the Wi-Fi Mobile icon from your iOS mobile instructions to complete the setup. have successfully completed the to your wireless utility to display
App from the App Store to and plug it into a wall outlet.
name that is shown on your companion device. Then click Start to continue. setup. Please click Save and write the available wireless networks
your iPhone or iPad. You can card (ex: dlink-a8fa). Then, enter the down the Wi-Fi Name (SSID) and and select the network that you
also search “QRS Mobile” From your iOS mobile device, Wi-Fi password included in your card (ex: password on your companion created for internet access.
from the App Store. click Settings. Then, click akbdj19368). card for future reference.
Wi-Fi.

Router/Access Point Mode


1 2 3 4 5
Internet
90mm
Router/AP
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: “Admin” Username: Admin
Password: ““ (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm dlinka8fa Wi- Fi Name (SSID) :
Wi-Fi Password :
akbdj19368 Wi-Fi Password :

Outlet Ethernet

Find an outlet close to an Internet- enabled device. Connect one end of the Ethernet cable into the From your laptop or mobile device go to your Open a web browser. First time users will From your laptop or mobile device go to
Then, move the switch to “Router/AP Mode” and plug Ethernet port of the Internet-enabled device (e.g. Wireless Utility to display the available wireless automatically be directed to the pre-wizard. Please your wireless utility to display the available
the DIR-505 into a wall outlet. Verify that the power LED modem, router) and then plug the other end of this networks and select the Wi-Fi name that is shown follow the on-screen instructions to complete the setup. wireless networks and select the network
has turned green. cable into the Ethernet port of the DIR-505. on your companion card (ex: dlink-a8fa). Then, If this is your second time type http://dlinkrouter that you created for Internet access.
enter the Wi-Fi password included in your card (Windows) or http://dlinkrouter.local (Mac/iPhone/
(ex: akbdj19368). iPad) in the address bar. Once the setup is complete
then proceed to the next step.

Repeater Mode
1 2 3 4 5 6
90mm

Repeater D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note


Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: “Admin” Username: Admin
Password: ““ (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm dlinka8fa Wi- Fi Name (SSID) :
Wi-Fi Password :
akbdj19368 Wi-Fi Password :

Move the switch to “Repeater From your laptop or mobile device go Open a web browser and type Select the configuration method and click Enter the Wi-Fi Password and click Next. From your laptop or mobile device
Mode”. Then, plug the DIR-505 to your Wireless Utility to display the http://dlinkrouter (Windows) or Next. Once the second screen appears, you have go to your wireless utility to display
into a wall outlet and verify that available wireless networks and select http://dlinkrouter.local (Mac/ successfully completed the setup. Please the available wireless networks and
the power LED has turned green. the network that is displayed on your iPhone/iPad) . Please follow the For Manual configuration, select the Wi-Fi click Save and write down the Wi-Fi Name select the network that you previously
companion card (ex: dlink-a8fa). Then, on-screen instructions to complete network you would like the DIR-505 to (SSID) and Password on your companion card connected to in Step 5 for internet access.
enter the Wi-Fi password included in your the setup. connect to wirelessly. for future reference.
card (ex: akbdj19368).
Wi-Fi Hot Spot Mode
1 2 3 4 5 6
90mm

Wi-Fi Hot
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Spot Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: “Admin” Username: Admin
Password: ““ (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm dlinka8fa Wi- Fi Name (SSID) :
Wi-Fi Password :
akbdj19368 Wi-Fi Password :

Move the switch to “Wi-Fi Hot From your laptop or mobile device go Open a web browser. First time users Select the Wi-Fi Hotspot you would like Uncheck the box if you wish to use your own Wi-Fi From your laptop or mobile
Spot”. Then, plug the DIR-505 into to your Wireless Utility to display the will automatically be directed to the DIR-505 to connect to and then click Network Name. Then, enter your own Wi-Fi network device go to your wireless utility
a wall outlet and verify that the available wireless networks and select pre-wizard. Please follow the on-screen Connect to continue. Then, enter the Wi-Fi name & password in the boxes. When the second to display the available wireless
power LED has turned green. the network that is displayed on your instructions to complete the setup. password and click Next to continue. screen appears, you have successfully completed networks and select the network
companion card (ex: dlink-a8fa). Then, If this is your second time type the setup. Click Save and write down the SSID that you created in step 5.
enter the Wi-Fi password included in http://dlinkrouter in the address & password in your companion card for future
your card (ex: akbdj19368). bar. Click Launch Wireless Setup reference.
Wizard to continue.

SharePort Mobile (Only Works with Router & Wi-Fi HotSpot Mode)
1 2 Internet
3 4 iOS Shown
For iOS devices For Android devices

Router/AP Mode
Router/AP

Repeater

Settings
Wi-Fi
Hot Spot

Router Mode
Shown

Move the switch to Router/AP Mode. Insert your USB flash drive to DIR-505 first and then Scan the bar code or search the app from the Google Play or From your mobile device, click Settings.
Note: Shareport Mobile only works on Router and Plug DIR-505 into wall outlet. iTune store to download the Shareport Mobile App to your
Wi-Fi HotSpot Mode. It does not work on AP or Note: The DIR-505 supports FAT32 and NTFS USB iPhone, iPad or Android devices. Once the application has been
Repeater Mode. format. Also, if your USB storage contains more than downloaded, continue to the next step.
1000 files(total size over 500GB), please be patient as
it will take more time to sort out all the files in your
storage.

5 iOS Shown 6 7 8
90mm

D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note


Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: “Admin” Username: Admin
Password: ““ (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm dlinka8fa Wi- Fi Name (SSID) :
Wi-Fi Password :
akbdj19368 Wi-Fi Password :

Settings
Movie

Click Wi-Fi and select the Wi-Fi name (SSID) that Once connected click on the SharePort Mobile icon. Click on the Settings icon located on the right top corner For the Movie section, click the Movie icon to play
you assigned during initial setup. Then, enter your Then, the following screen will pop up. of the screen. Then, click Edit to enter your User Name and your movie from your USB flash drive.
Wi-Fi password. Password (refer to the Create User section below). Once
you finish, click Done to continue. By default, User Name is Note: iOS supports video formats such as MP4 and MOV.
“admin” and Password is blank. Android supports MP4 and MOV video formats.
Note: If you set the password for the “admin” in your DIR-505,
you need to enter the password.

9 10 11 12 13

Music Photo File Folder Favorite

For the Music section, click the Music icon to For the Photo section, click the Photo icon to For the Files section, click on the Files icon For the Folder section, click on the Folder Once you open a file, you may add this file
play your music from your USB flash drive. open your photo from your USB flash drive. to open your file from your USB flash drive. icon to open a file from your USB flash drive. to your Favorite folder by selecting the
To upload a photo file from your mobile “Star” icon. For the Favorite section, click
Note: iOS support MP3 & WAV music formats. Note: iOS & Android both support the Note: iOS and Android both support the device to your USB go to + sign located on on the Favorite icon to open your favorite
Android supports MP3 & WAV. following image formats : JPG, BMP,GIF, PNG. following document formats: html, key, pages, the upper right. file from your USB flash drive.
numbers, txt, ref, doc, PPt, XIS, Pdf.

SharePort Mobile - Create User

1 2 3 4

Make sure your laptop or mobile device connect to the DIR-505. Create your own User Name and Password, Click Modify to modify the user settings. Then, click Click on the folder you want to open (i.e. usb_A1). Select
Enter http://dlinkrouter in the URL, go to SETUP -> STORAGE. Make then click Add/Edit to add your user name Browse to locate the folder you would like to use. Read Only or Read/Write and Click Ok to continue.
sure “Enable SharePort Web Access” is checked. and password. Once you complete all the setting, click Save Setting to
continue.

©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered
Technical Support trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other
trademarks or registered trademarks are the property of their respective owners.
U.S. and Canadian customers can contact D-Link technical support through our web site or by United States Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and 802.11n specifications.
phone. You can find software updates and user documentation on the D-Link website as well Telephone: (877) 453-5465 Actual data throughput will vary. Network conditions and environmental factors, including volume of
as frequently asked questions and answers to technical issues. Internet: http://support.dlink.com network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental conditions will adversely affect wireless signal range.
Before you contact technical support, please have the following ready: Product specifications, size and shape are subject to change without notice, and actual product appearance
Canada may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
• Model number of the product (e.g. DIR-505)
Telephone: (800) 361-5265
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1)) Internet: http://support.dlink.ca
iPhone, iPad, and iPod touch are registered trademarks of Apple Inc.
• Serial Number (s/n number located on the label on the bottom of the product).

Version 1.0 (May 4, 2012)

You might also like