Professional Documents
Culture Documents
Command: rec
RECTANG
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 0,0
Specify other corner point or [Area/Dimensions/Rotation]: @8,8
Command: '_.zoom _e
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 0.4
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: Specify opposite corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.4000>:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Gambar 2.94. Pembuatan Koil Tahap 4
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]: 0.2
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.2000>: 0.2
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.2000>: 0.2
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.2000>: 0.2
Command: reg
REGION
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects: 1 found, 5 total
Select objects: 1 found, 6 total
Select objects: 1 found, 7 total
Select objects: 1 found, 8 total
Select objects:
1 loop extracted.
1 Region created.
Command: ext
EXTRUDE
Current wire frame density: ISOLINES=4
Select objects to extrude: 1 found
Select objects to extrude: 1 found, 2 total
Select objects to extrude: 1 found, 3 total
Select objects to extrude: 1 found, 4 total
Select objects to extrude: 1 found, 5 total
Select objects to extrude: 1 found, 6 total
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle]: 1.8
Command: Specify opposite corner:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: 5.5
Specify next point or [Undo]: 2.9
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 0.2
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]: *Cancel*
Command: _dimradius
Select arc or circle:
Dimension text = 2.9
Specify dimension line location or [Mtext/Text/Angle]: *Cancel*
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]: 2.7
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: l
LINE Specify first point:
Specify next point or [Undo]: 3.5
Specify next point or [Undo]: 3.5
Specify next point or [Close/Undo]: '_.zoom
>>Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _e
** Requires a regen, cannot be transparent.
Resuming LINE command.
Specify next point or [Close/Undo]: *Cancel*
Command: '_.zoom _e
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 0.2
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.2000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.2000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.2000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: reg
REGION
Select objects: Specify opposite corner: 8 found
Select objects:
1 loop extracted.
1 Region created.
Command: _solidedit
Solids editing automatic checking: SOLIDCHECK=1
Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: _face
Enter a face editing option
[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit]
<eXit>:
_taper
Select faces or [Undo/Remove]: *Cancel*
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: l
LINE Specify first point:
Specify next point or [Undo]: 2.5
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter]:
Command: *Cancel*
Command:
Command: Specify opposite corner:
Command: *Cancel*
Command: tr
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: Specify opposite corner: 4 found
Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*
Command: reg
REGION
Select objects: Specify opposite corner: 4 found
Select objects:
1 loop extracted.
1 Region created.
Command: tr
TRIM
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: Specify opposite corner: 4 found
Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*
Command: reg
REGION
Select objects: Specify opposite corner: 4 found
Select objects:
1 loop extracted.
1 Region created.
Gambar 2.108. Pembuatan Koil Tahap 18
Command: ext
EXTRUDE
Current wire frame density: ISOLINES=4
Select objects to extrude: Specify opposite corner: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle] <4.0000>: 2
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: '_.zoom _e
Command: '_.zoom _e
Command: o
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <Through>: 0.2
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.2000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.2000>:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.2000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: _u
Command has been completely undone.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.2
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.2
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]: 4
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: reg
REGION
Select objects: Specify opposite corner: 4 found
Select objects:
1 loop extracted.
1 Region created.
Command: ext
EXTRUDE
Current wire frame density: ISOLINES=4
Select objects to extrude: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle] <3.0000>: 2.5
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: '_.zoom _e
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: '_.zoom _e
Command: ext
EXTRUDE
Current wire frame density: ISOLINES=4
Select objects to extrude: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle] <1.0000>: 1.8
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.5
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: 0.2
Specify next point or [Close/Undo]:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 1.2
Command: '_.zoom _e
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: _revolve
Current wire frame density: ISOLINES=4
Select objects to revolve: Specify opposite corner: 1 found
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: Specify opposite corner: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point:
Command: Specify opposite corner:
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: *Cancel*
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: '_3DFOrbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Command: m
MOVE
Select objects: Specify opposite corner: 0 found
Select objects: *Cancel*
Command: *Cancel*
Command: p
PAN
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: _.erase 1 found
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _open
Command: _pasteclip Specify insertion point:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating
model.
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: T
Specify point on object for first tangent of circle:
Specify point on object for second tangent of circle:
*Requires a TAN object-snap and selection of Circle, Arc, or Line.
Specify point on object for second tangent of circle:
Requires a TAN object-snap and selection of Circle, Arc, or Line.
Specify point on object for second tangent of circle: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: m
MOVE 3 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: *Cancel*
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: _cutclip
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point: Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _H
Command: l LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<3dHidden>: _2 Regenerating model.
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Command: m
MOVE 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: _.erase 1 found
Command: _.erase 1 found
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found (1 duplicate), 1 total
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.6
Specify next point or [Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Command:
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: m
MOVE 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: m
MOVE 4 found
Specify base point or [Displacement] <Displacement>:
Too many objects selected for INTERSECT
Specify second point or <use first point as displacement>:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: Specify opposite corner: 4 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: Specify opposite corner: 4 found
Select objects: *Cancel*
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: Specify opposite corner: 4 found
Select objects:
Specify base point:
Too many objects selected for INTERSECT
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.1
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner:
Command: '_.zoom _e
Command: _u INTELLIZOOM INTELLIZOOM ZOOM INTELLIPAN
Command: _u Constrained Orbit GROUP Regenerating model.
Command: m
MOVE 4 found
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: m
MOVE 2 found
Specify base point or [Displacement] <Displacement>:
Too many objects selected for INTERSECT
Specify second point or <use first point as displacement>:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.1
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner:
Command: m
MOVE 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]: 0.2
Specify next point or [Undo]: 0.5
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: ext
EXTRUDE
Current wire frame density: ISOLINES=4
Select objects to extrude: Specify opposite corner: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle]: 0.4
Command: Specify opposite corner:
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _u MOVE
Command: Specify opposite corner:
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: Specify opposite corner:
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: _u LINE
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u MOVE
Command: _u INTELLIZOOM
Command: _u PASTECLIP GROUP
Command: _u COPYCLIP GROUP
Command: _u INTELLIZOOM
Command: _u EXTRUDE
Command: ext
EXTRUDE
Current wire frame density: ISOLINES=4
Select objects to extrude: Specify opposite corner: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle] <0.4000>: 0.3
Command: Specify opposite corner:
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: Specify opposite corner:
Command: m
MOVE 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _C
Command: _vscurrent
Enter an option
[2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*