Professional Documents
Culture Documents
DISTRIBUTORI
CARATTERISTICHE SIGNIFICATIVE DELLA NOSTRA PRODUZIONE
MAIN CHARACTERISTICS OF OUR PRODUCTION RANGE
Tutta la produzione VPS Brevini vuole essere una produzione di All the production VPS Brevini want to be a high quality produc-
alta qualità. Difatti, il progetto, la scelta dei migliori materiali, lavo- tion. Infact the project of each single valve and the choice of the
rati con le tecnologie più avanzate e con un controllo meticoloso better materials, machined with the highest tecnologies and under
ed accurato in ogni fase del processo produttivo, permettono le the strongest controls in each process, allow highest characteris-
elevate caratteristiche e le molteplici applicazioni indicate per cia- tics and numerous applications described in the following pages.
scun tipo di prodotto, oltre alle quali desideriamo informare che: Furthermore:
1. tutti i corpi delle vostre valvole, cioè le fusioni, sono realizza- 1. all the casting are made in Shell-Moulding, in special graph-
te in ghisa speciale ad alta resistenza ed in Shell Moulding. ite cast iron. This kind of cast iron is in higt resistence, and
Con questo tipo di ghisa è stato possibile ottenere, a parità di it allows to have, with the same external overall dimensions,
ingombri esterni, passaggi interni più ampi e di conseguenza bigger internal gallery, and lower pressure drops
perdite di carico più ridotte
2. all spools are made in high resistence steel, nichel plated,
2. i cursori sono realizzati in acciaio legato ad alta resistenza,
radial balanced and with special notches in order to have
sono nichelati, sono bilanciati radialmente ed hanno delle
a better sensibility. All OF THEM ARE COMPLETELY INTER-
speciali nicchie che ne migliorano notevolmente la progres-
CHANGEABLE
sività. SONO TOTALMENTE INTERCAMBIABILI
3. tutte le molle sono realizzate in acciaio legato ad alta resi- 3. all springs are made in high resistence steel. Pressure setting
stenza. Quelle di taratura precompresse a pacco springs are pressed before testing.
4. l’errore di forma, cioè la tolleranza max. del foro che alloggia il 4. max tolerance of spool housing is 2 micron.
cursore è di 2 micron, sia nella rotondità che nella rettilineità
5. internal leakage at 120 bar, 50° C and oil 30 cSt is beetwen 1
5. il drenaggio, cioè il trafilamento a 120 bar, con viscosità del- and 2 cm³/min, depending from the kind of spool and the kind
l’olio 30 cSt, a 50°C, varia da 1 a 2 cm³/min in funzione del tipo of valve
di distributore e del tipo di cursore
6. all of our valves are completely tested before delivery, ac-
6. tutta la n/s produzione, cioè il 100%,viene collaudata su spe- cording to the Customers requirements
ciali banchi di collaudo dove, oltre al controllo dei normali
parametri, viene simulato, per quanto è possibile, l’impianto 7. max pressure showed in this catalogue is 350/400 bar, but
del Cliente, così come vengono tarate tutte le valvole alla ta- there is no problem to increase 30 - 40 % this value, always in
ratura richiesta dal Cliente stesso safety conditions
7. la pressione max. di esercizio è indicata a 350/400 bar, ma 8. several special valves are made for special requirements,
non abbiamo nessun problema ad andare oltre tale pressio- and of course all these applications are not showed in this
ne anche del 30% e per alcuni tipi anche del 40% sempre, catalogue, but we will be pleased to give to all the Customers
ovviamente, in regime di sicurezza e di tranquillità di funzio- our over 30 years experience, in order to find the better solu-
namento tion to their problems.
8. molte e svariate soluzioni speciali sono state realizzate per Please do not hesitate to contact us directly if You will not find in
particolari esigenze del Cliente che, per ovvie ragioni non pos- these pages the valve You need: probabily we already manufac-
siamo qui rappresentare, ma siamo disponibili e felici di met- ture it.
tere a disposizione della n/s Clientela tutta la n/s esperienza,
al fine di trovare la soluzione migliore per ogni necessità.
Non esitate ad interpellare il n/s ufficio tecnico/commerciale qualo-
ra quanto rappresentato in questo catalogo non sia sufficiente per
le V/s esigenze, così come possiamo fornire maggiori informazioni
per problematiche specifiche, diagrammi, forze, dimensioni, etc.
Pressione massima sulla linea di ritorno / Max back pressure 20 bar (290 PSI)
Massima contaminazione / Max contamination level NAS 1638 classe 9 (19/16 ISO-4406)
Filtraggio / Filtration β 12 ≥ 75
Sono disponibili cursori ad alta parzializzazione, protezione marina, OR in Viton®, molle speciali, ecc.
Spool are available with different metering, marine protected, Viton® seals, special spring, etc.
CARATTERISTICHE GENERALI
GENERAL SPECIFICATION
N° max sezioni
6 6 12 12 12 10
Max section
Portata l/min
40 70 40 70 120 230
Max flow l/min
Caratteristiche
Features
Portata GPM
10.6 18.5 10.6 18.5 31.7 60.7
Max flow GPM
Parallelo
Parallel • • • • • •
Circuito
Circuit
Serie
Series • • • •
Tandem
Tandem • • • •
Diretta
Valv.max press.
• • •
Main relief
Direct
Pilotata
Piloted • • •
Antiurto
Overload • • • • • •
Valvole ausiliarie
Port relief
Anticavitazione
Anti cavitation • • • •
Combinate
Combined • • • •
BSP 3/8” 3/8” ÷ 1/2” 3/8” 1/2” 1/2” ÷ 3/4” 3/4” ÷ 1”
Filettature
Threads
SAE 6 6-8 6 10 10 ÷ 12 16
mm ±5 ±5 ±5 ±5 ±7 ±8
A÷B
inch ± 0.20 ± 0.20 ± 0.20 ± 0.20 ± 0.28 ± 0.31
Spool stroke
Corsa cursore
1
Distributori monoblocco
Monoblock valves
DCV 20 - DCV 40
2
DISTRIBUTORE MODELLO
DIRECTIONAL CONTROL VALVE MODEL DCV 20
PORTATA 40 l/min PRESSIONE MAX 400 BAR
FLOW 10.6 GPM MAX PRESSURE 5800 PSI
Valvola antiurto
Overload valve
(...) = inches
3
DISTRIBUTORE MODELLO
DIRECTIONAL CONTROL VALVE MODEL DCV 40
PORTATA 70 l/min PRESSIONE MAX 400 BAR
FLOW 18.5 GPM MAX PRESSURE 5800 PSI
Valvola antiurto
Overload valve
(...) = inches
4
CODICE DI ORDINAZIONE
ORDERING CODE
Modello Sezione di entrata Sezioni di lavoro Sezione di uscita Filettature
Model Inlet section Working sections Outlet section Threads
Distributore Pag
Directional control valve 3..4
Entrata
6
Inlet
Combinazione valvole
7
Valves arrangement
Taratura
—
Pressure setting
Cursori
8
Spools
Comando cursore lato leva
9..12
Spool control handle side
Controllo cursore lato cappellotto
13..17
Spool control cap side
Valvole ausiliarie
18
Service port valves
Asta leva
18
Hand lever
Uscita
19
Outlet
Filettature
19
Threads
Sezione di entrata
Inlet section
5
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Sezione di entrata Sezione di entrata
laterale superiore
ISL IST*
Side inlet Top inlet
* Standard su DCV40, su richiesta per DCV20 / Standard for DCV40, on request for DCV20
6
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
D
VALE SOLO PER DCV20 B
VALE SOLO PER DCV40 VALID ONLY FOR DCV20
A B VALID ONLY FOR DCV40
7
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
3 posizioni, doppio effetto
- A e B a scarico
ST4
3 posizioni, doppio effetto rigene-
rativo in A (non standard)
8
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Comando idraulico
- Pressione di pilotaggio
5-20 bar
Leva standard
Leva di sicurezza con
fermo in posizione “a”
Senza leva
9
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Comando a cloche a 90°
Leva di sicurezza con
fermo in posizione “b”
con fulcro a monte CS10
TIPO A B Security handle locked in
CS7 TIPO A Cloche control at 90° (CX)
mm mm mm with fulcrum on upstream
TYPE
inch inch
position “b” TYPE
inch section *
200 73 280
DCV 20 7.87 2.87
DCV 20 11.02
220 77 285
DCV 40 8.66 3.03
DCV 40 11.22
Comando a cloche a 90°
Leva di sicurezza con con fulcro ruotato 180°
fermo in 4a posizione sull’elemento a valle
flottante
TIPO A B CS9 TIPO A Cloche control at 90° with
CS12
mm mm Security handle locked in mm
TYPE TYPE fulcrum turned 180° on the
inch inch 4th position inch downstream section
200 73 280
DCV 20 7.87 2.87
DCV 20 11.02
220 77 285
DCV 40 8.66 3.03
DCV 40 11.22
10
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Comando a cloche a 90°
con fulcro ruotato 180° Limitatore di corsa, leva
sull’elemento a monte a180°
Leva standard con microin-
Limitatore di corsa terruttore in “a”
11
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
12
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
13
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
14
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
D16
Predisposizione per doppio A D13 Comando elettro-idraulico A B
comando TIPO
TYPE mm B ON-OFF. Tensione 12Vcc TIPO
TYPE mm mm *
inch senza valvola riduttrice inch inch
Prearranged for double - Pressione di pilotaggio
control 58 91 104.5
DCV 20 2.28
M6 20 bar DCV 20 3.58 4.11
71 Electroidraulic ON-OFF con- 96 106.5
DCV 40 2.80
M8 trol. Voltage 12Vdc without DCV 40 3.78 4.19
pressure reducing valve
- Pilot pressure 20 bar 290 psi
D17
Comando pneumatico A D14 Comando elettro-idraulico A B
- Pressione di pilotaggio
5-10 bar
TIPO
TYPE mm B ON-OFF. Tensione 24Vcc con
valvola riduttrice
TIPO
TYPE mm mm *
inch inch inch
- Pressione di pilotaggio
ON-OFF pneumatic control 111 91 104.5
- Pilot pressure 5-10 bar
DCV 20 4.37
1/4” BSP 20 bar DCV 20 3.58 4.11
72.5-145 psi 119.5 Electroidraulic ON-OFF 96 106.5
DCV 40 4.70
1/4” BSP control. Voltage 24Vdc with DCV 40 3.78 4.19
pressure reducing valve
- Pilot pressure 20 bar 290 psi
Comando elettro-idraulico
D15 Comando elettro-idraulico
D18
A B A B
ON-OFF. Tensione 12Vcc con
valvola riduttrice
TIPO
TYPE mm mm * ON-OFF. Tensione 24Vcc
senza valvola riduttrice
TIPO
TYPE mm mm *
inch inch inch inch
- Pressione di pilotaggio - Pressione di pilotaggio
91 104.5 91 104.5
20 bar DCV 20 3.58 4.11
20 bar DCV 20 3.58 4.11
Electroidraulic ON-OFF 96 106.5 Electroidraulic ON-OFF con- 96 106.5
control. Voltage 12Vdc with DCV 40 3.78 4.19 trol. Voltage 24Vdc without DCV 40 3.78 4.19
pressure reducing valve pressure reducing valve
- Pilot pressure 20 bar 290 psi - Pilot pressure 20 bar 290 psi
15
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
D19
Comando elettro-idraulico A B Comando elettro-pneumatico A B D22
ON-OFF. Tensione 12Vcc TIPO
TYPE mm mm * ON-OFF. Tensione 24Vcc TIPO
TYPE mm mm
- Pressione di pilotaggio inch inch - Pressione di pilotaggio inch inch
20 bar 5-10 bar
91 104.5 111 101.5
Electroidraulic ON-OFF
DCV 20 3.58 4.11 ON-OFF electro pneumatic
DCV 20 4.37 4.00
control. Voltage 12Vdc 96 106.5 control. Voltage 24Vdc 119.5 103.5
- Pilot pressure 20 bar 290 psi DCV 40 3.78 4.19 - Pilot pressure 5-10 bar DCV 40 4.70 4.07
72.5-145 psi
D20
Comando elettro-idraulico A B Comando elettro-pneumatico A B D23
ON-OFF. Tensione 24Vcc
- Pressione di pilotaggio
TIPO
TYPE mm mm * ON-OFF. Tensione 26Vcc
- Pressione di pilotaggio
TIPO
TYPE mm mm
inch inch inch inch
20 bar 5-10 bar
91 104.5 111 101.5
Electroidraulic ON-OFF
DCV 20 3.58 4.11 ON-OFF electro pneumatic
DCV 20 4.37 4.00
control. Voltage 24Vdc 96 106.5 control. Voltage 26Vdc 119.5 103.5
- Pilot pressure 20 bar 290 psi DCV 40 3.78 4.19 - Pilot pressure 5-10 bar DCV 40 4.70 4.07
72.5-145 psi
Comando elettro-pneumatico
ON-OFF. Tensione 12Vcc TIPO A B D21 Comando elettro-pneumatico
ON-OFF. Tensione 28Vcc TIPO A B D24
mm mm mm mm
- Pressione di pilotaggio TYPE - Pressione di pilotaggio TYPE
inch inch inch inch
5-10 bar 5-10 bar
111 101.5 111 101.5
ON-OFF electro pneumatic
DCV 20 4.37 4.00 ON-OFF electro pneumatic
DCV 20 4.37 4.00
control. Voltage 12Vdc 119.5 103.5 control. Voltage 28Vdc 119.5 103.5
- Pilot pressure 5-10 bar DCV 40 4.70 4.07 - Pilot pressure 5-10 bar DCV 40 4.70 4.07
72.5-145 psi 72.5-145 psi
16
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Microinterruttore in “a”
TIPO A D26 Ritenuta con sgancio automa-
tico registrabile in “a” e “b” TIPO A D29
Micro-switch in “a” mm mm
TYPE TYPE
inch Detent with adjustable inch
70 automatic hydraulic release in 115
DCV 40 2.76 “a” and “b”
DCV 40 4.53
Microinterruttore in “b”
TIPO A D27
Micro-switch in “b” mm
TYPE
inch
70
DCV 40 2.76
17
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Valvola antiurto in “B” VB1
Overload valve in position “B” *
* Per valvole ausiliarie o sedi con tappo “A”, interpellare il nostro servizio commerciale
For service port valves or prearranged for port valve with plug in “A” port please contact our commercial department.
Standard DCV 20
Standard DCV 40 W2
18
DCV .. / . IS. . (...) ST.. CS.. D.. V. W. U. F.
Uscita superiore US
Top outlet *
Uscita laterale
Side outlet
UL
19
CURVE CARATTERISTICHE
CHARACTERISTIC PRESSURE DROP FLOW CURVES
Perdite i carico tra entrata (P) e uscita (T) Perdite i carico tra entrata (P) e utilizzi (A/B) Perdite i carico tra utilizzi (A/B) e uscita (T)
Inlet pressure drop between inlet port (P) and Inlet pressure drop between inlet port (P) and Inlet pressure drop between work ports (A/B)
outlet port (T) work ports (A/B) and outlet port (T)
CODE
Viscosità dell’olio Temperatura dell’olio Le curve di commutazione sono differenti per ogni tipo di cursore,
Oil viscosity Oil temperature pertanto a richiesta si forniscono curve specifiche
Metering curves are different for each typee of spool. Therefore
30CST 50°C particular curves are supplied on request
20
CURVE CARATTERISTICHE
CHARACTERISTIC PRESSURE DROP FLOW CURVES
Perdite i carico tra entrata (P) e uscita (T) Perdite i carico tra entrata (P) e utilizzi (A/B) Perdite i carico tra utilizzi (A/B) e uscita (T)
Inlet pressure drop between inlet port (P) and Inlet pressure drop between inlet port (P) and Inlet pressure drop between work ports (A/B)
outlet port (T) work ports (A/B) and outlet port (T)
CODE
Viscosità dell’olio Temperatura dell’olio Le curve di commutazione sono differenti per ogni tipo di cursore,
Oil viscosity Oil temperature pertanto a richiesta si forniscono curve specifiche
Metering curves are different for each typee of spool. Therefore
30CST 50°C particular curves are supplied on request
21
Distributori componibili
Modular valves
DCV 30 - DCV 50
DCV 80 - DCV MG
22
DISTRIBUTORE COMPONIBILE MODELLO
MODULAR VALVE MODEL DCV 30
PORTATA 40 l/min PRESSIONE MAX 350 BAR
FLOW 10.6 GPM MAX PRESSURE 5075 PSI
23
DISTRIBUTORE COMPONIBILE MODELLO
MODULAR VALVE MODEL DCV 50
PORTATA 70 l/min PRESSIONE MAX 350 BAR
FLOW 18.5 GPM MAX PRESSURE 5075 PSI
24
DISTRIBUTORE COMPONIBILE MODELLO
MODULAR VALVE MODEL DCV 80
PORTATA 120 l/min PRESSIONE MAX 350 BAR
FLOW 31.7 GPM MAX PRESSURE 5075 PSI
25
DISTRIBUTORE COMPONIBILE MODELLO
MODULAR VALVE MODEL DCV MG
PORTATA 230 l/min PRESSIONE MAX 350 BAR
FLOW 60.7 GPM MAX PRESSURE 5075 PSI
26
CODICE DI ORDINAZIONE
ORDERING CODE
Distributore Pag
Directional control valve 23..26
Entrata
28
Inlet
Combinazione valvole
29..30
Valves arrangement
Taratura V.max
—
m.r. pressure setting
Posizione di ingresso
31
Port location
Filettature
31
Threads
Cursori
32
Spools
Comando cursore lato leva
33..36
Spool control handle side
Controllo cursore lato capp.
37..41
Spool control cap side
Valvola ausiliaria in A
42
Auxiliary valve on port A
Valvola ausiliaria in B
42
Auxiliary valve on port B
Circuito
43
Circuit
Filettature
43
Threads
Asta leva
43
Hand lever
Intermedio
44
Intermediate
Filettature
44
Threads
Uscita
Outlet 45
Filettature
Threads 45
Sezione di uscita
Sezioni intermedie Outlet section
Intermediate sections
Sezioni di lavoro
Working section
Sezione di entrata
Inlet section
27
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
28
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Lato cappellotto
Cap side
Lato leva
Handle side
Anticavitation valve
3 Soledoid dump valve 26V NORMALLY
11
closed
Valvola elettrica di messa a scarico
Valvola di pilotaggio esterno 30V NORMALMENTE aperta
External pilot-operated valve
4 Soledoid dump valve 30V NORMALLY
12
open
Valvola elettrica di messa a scarico
Valvola blocco traversi o freni idraulici 30V NORMALMENTE chiusa
* Valvola di massima pressione diretta, solo per DCV30 / Direct operated main valve only for DCV30
29
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
30
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Entrata superiore
Top inlet
Entrata laterale
Side inlet
DCV 30
3/8” BSP F3
9/16” - 18 SAE6 F31
DCV 50
1/2” BSP F4
7/8” - 14 SAE10 F33
1/2” BSP F4
DCV 80
3/4” BSP F5
7/8” - 14 SAE10 F33
1” 1/16 - 16 SAE12 F34
DCV MG
1” BSP F6
1” 5/16 - 12 SAE16 F36
31
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
3 posizioni, doppio effetto
ST1 3 posizioni, semplice effetto in A
- A a scarico
3 posizioni, doppio effetto
- A e B a scarico
ST4 4 posizioni, doppio effetto con 4a
posizione flottante
3 posizioni, doppio effetto serie
- A e B a scarico
3 posizioni, semplice effetto in A
32
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(...) VB. AP. F. W. IM. F. U. F.
Comando idraulico
- Pressione di pilotaggio
Leva standard 20 bar
Leva di sicurezza con
Senza leva fermo in posizione “a”
33
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Comando a cloche a 90°
con fulcro a valle per
entrata destra e a monte
per entrata a sinistra (non
Leva di sicurezza con
fermo in posizione “b”
disponibile per DCV MG) CS10
TIPO A B Security handle locked in
CS7 TIPO A Cloche control at 90° (CX)
mm mm mm with fulcrum on the
TYPE
inch inch
position “b” TYPE
inch downstream for right inlet *
200 73 285 section and upstream for
DCV 30 7.87 2.87
DCV 30 11.22
left inlet section (not avail-
able on DCV MG)
220 77 290
DCV 50 8.66 3.03
DCV 50 11.42
245 102 308.5
DCV 80 9.65 4.02
DCV 80 12.15
260 119.5 324
DCV MG 10.24 4.70
DCV MG 12.76
Comando a cloche a 90°
con fulcro a monte per
entrata destra e a valle
Leva di sicurezza con per entrata a sinistra (non
fermo in posizione “a”
disponibile per DCV MG) CS11
e “b”
TIPO A B CS8 TIPO A Cloche control at 90° with (CX)
mm mm Security handle locked in mm fulcrum on the upstream
TYPE
inch inch position “a” and “b” TYPE
inch for right inlet section and *
200 73 285 downstream for left inlet
DCV 30 7.87 2.87
DCV 30 11.22
section (not available on
DCV MG)
220 77 290
DCV 50 8.66 3.03
DCV 50 11.42
245 102 308.5
DCV 80 9.65 4.02
DCV 80 12.15
260 119.5 324
DCV MG 10.24 4.70
DCV MG 12.76
34
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
35
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Leva standard con Leva a 180° con microin-
microinterruttore in “b” terruttore in “a”
Leva a 180° con microin- Leva a 180° con microin-
terruttore in “a” e “b” terruttore in 4a posizione
36
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
37
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
38
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
D16
Predisposizione per doppio A D13 Comando elettro-idraulico A B
comando TIPO
TYPE mm B ON-OFF. Tensione 12Vcc TIPO
TYPE mm mm *
inch senza valvola riduttrice inch inch
Prearranged for double - Pressione di pilotaggio
control 58 105.5 122
DCV 30 2.28
M6 20 bar DCV 30 4.15 4.80
71 Electroidraulic ON-OFF con- 110.5 124
DCV 50 2.80
M8 trol. Voltage 12Vdc without DCV 50 4.35 4.88
pressure reducing valve
99 127 127.5
DCV 80 3.90
M8 - Pilot pressure 20 bar 290 psi DCV 80 5.00 5.02
103.5 131 134.5
DCV MG 4.07
M8 DCV MG 5.16 5.30
D17
Comando pneumatico A D14 Comando elettro-idraulico A B
- Pressione di pilotaggio
5-10 bar
TIPO
TYPE mm B ON-OFF. Tensione 24Vcc con
valvola riduttrice
TIPO
TYPE mm mm *
inch inch inch
- Pressione di pilotaggio
ON-OFF pneumatic control 111 105.5 122
- Pilot pressure 5-10 bar
DCV 30 4.37
1/4” BSP 20 bar DCV 30 4.15 4.80
72.5-145 psi 119.5 Electroidraulic ON-OFF 110.5 124
DCV 50 4.70
1/4” BSP control. Voltage 24Vdc with DCV 50 4.35 4.88
pressure reducing valve
143 127 127.5
DCV 80 5.63
1/4” BSP - Pilot pressure 20 bar 290 psi DCV 80 5.00 5.02
148 131 134.5
DCV MG 5.83
1/4” BSP DCV MG 5.16 5.30
Comando elettro-idraulico
D15 Comando elettro-idraulico
D18
A B A B
ON-OFF. Tensione 12Vcc con
valvola riduttrice
TIPO
TYPE mm mm * ON-OFF. Tensione 24Vcc
senza valvola riduttrice
TIPO
TYPE mm mm *
inch inch inch inch
- Pressione di pilotaggio - Pressione di pilotaggio
105.5 122 105.5 122
20 bar DCV 30 4.15 4.80
20 bar DCV 30 4.15 4.80
Electroidraulic ON-OFF 110.5 124 Electroidraulic ON-OFF con- 110.5 124
control. Voltage 12Vdc with DCV 50 4.35 4.88 trol. Voltage 24Vdc without DCV 50 4.35 4.88
pressure reducing valve pressure reducing valve
127 127.5 127 127.5
- Pilot pressure 20 bar 290 psi DCV 80 5.00 5.02
- Pilot pressure 20 bar 290 psi DCV 80 5.00 5.02
131 134.5 131 134.5
DCV MG 5.16 5.30
DCV MG 5.16 5.30
39
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
D19
Comando elettro-idraulico A B Comando elettro-pneumatico A B D22
ON-OFF. Tensione 12Vcc TIPO
TYPE mm mm * ON-OFF. Tensione 24Vcc TIPO
TYPE mm mm
- Pressione di pilotaggio inch inch - Pressione di pilotaggio inch inch
20 bar 5-10 bar
105.5 122 111 119
Electroidraulic ON-OFF
DCV 30 4.15 4.80 ON-OFF electro pneumatic
DCV 30 4.37 4.69
control. Voltage 12Vdc 110.5 124 control. Voltage 24Vdc 119.5 121
- Pilot pressure 20 bar 290 psi DCV 50 4.35 4.88 - Pilot pressure 5-10 bar DCV 50 4.70 4.76
72.5-145 psi
127 127.5 143 132
DCV 80 5.00 5.02
DCV 80 5.63 5.20
131 134.5 148 139
DCV MG 5.16 5.30
DCV MG 5.83 5.47
D20
Comando elettro-idraulico A B Comando elettro-pneumatico A B D23
ON-OFF. Tensione 24Vcc
- Pressione di pilotaggio
TIPO
TYPE mm mm * ON-OFF. Tensione 26Vcc
- Pressione di pilotaggio
TIPO
TYPE mm mm
inch inch inch inch
20 bar 5-10 bar
105.5 122 111 119
Electroidraulic ON-OFF
DCV 30 4.15 4.80 ON-OFF electro pneumatic
DCV 30 4.37 4.69
control. Voltage 24Vdc 110.5 124 control. Voltage 26Vdc 119.5 121
- Pilot pressure 20 bar 290 psi DCV 50 4.35 4.88 - Pilot pressure 5-10 bar DCV 50 4.70 4.76
72.5-145 psi
127 127.5 143 132
DCV 80 5.00 5.02
DCV 80 5.63 5.20
131 134.5 148 139
DCV MG 5.16 5.30
DCV MG 5.83 5.47
Comando elettro-pneumatico
ON-OFF. Tensione 12Vcc TIPO A B D21 Comando elettro-pneumatico
ON-OFF. Tensione 28Vcc TIPO A B D24
mm mm mm mm
- Pressione di pilotaggio TYPE - Pressione di pilotaggio TYPE
inch inch inch inch
5-10 bar 5-10 bar
111 119 111 119
DCV 30 4.37 4.69 ON-OFF electro pneumatic
DCV 30 4.37 4.69
ON-OFF electro pneumatic
control. Voltage 12Vdc 119.5 121 control. Voltage 28Vdc 119.5 121
- Pilot pressure 5-10 bar
DCV 50 4.70 4.76 - Pilot pressure 5-10 bar DCV 50 4.70 4.76
72.5-145 psi 72.5-145 psi
143 132 143 132
DCV 80 5.63 5.20
DCV 80 5.63 5.20
148 139 148 139
DCV MG 5.83 5.47
DCV MG 5.83 5.47
40
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Microinterruttore in “a”
TIPO A D26 Ritenuta con sgancio automa-
tico registrabile in “a” e “b” TIPO
A D29
Micro-switch in “a” mm mm
TYPE TYPE
inch Detent with adjustable inch
70 automatic hydraulic release in 70
DCV 50 2.76 “a” and “b”
DCV 50 2.76
91 91
DCV 80 3.58
DCV 80 3.58
110 110
DCV MG 4.33
DCV MG 4.33
Microinterruttore in “b”
TIPO A D27 Limitatore di corsa
TIPO A D30
Micro-switch in “b” mm Spool stroke adjustment mm
TYPE TYPE
inch inch
70 57
DCV 50 2.76
DCV 30 2.24
91 62
DCV 80 3.58
DCV 50 2.44
110 77
DCV MG 4.33
DCV 80 3.03
86
DCV MG 3.39
41
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Valvola antiurto in “B” VB1
Overload valve in position “B” (*)
Valvola anticavitazione in “B”
Anti-cavitation “B” port
VB2
* Specificare la taratura
Indicate pressure setting
42
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Circuito serie
Serie circuit
AP2
DCV 30
3/8” BSP F3
9/16” - 18 SAE6 F31
DCV 50
1/2” BSP F4
7/8” - 14 SAE10 F33
1/2” BSP F4
DCV 80
3/4” BSP F5
7/8” - 14 SAE10 F33
1” 1/16 - 16 SAE12 F34
DCV MG
1” BSP F6
1” 5/16 - 12 SAE16 F36
Standard DCV 30
Per comando a cloche usare W2 W1
For cloche control use W2
Standard DCV MG W3
43
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Intermedio di scarico
Intermediate outlet section
IMU
* Per combinazioni valvole vedi pag. 29-30 ** Per tipo e caratteristiche interpellare il ns. Ufficio Commerciale
For valves combination to see page 29-30 For type and caracteristics please contact our Commercial Departement
DCV 30
3/8” BSP F3
9/16” - 18 SAE6 F31
DCV 50
1/2” BSP F4
7/8” - 14 SAE10 F33
1/2” BSP F4
DCV 80
3/4” BSP F5
7/8” - 14 SAE10 F33
1” 1/16 - 16 SAE12 F34
DCV MG
1” BSP F6
1” 5/16 - 12 SAE16 F36
44
DCV .. / . I. . (...) . F. ST.. CS.. D.. VA.(..) VB.(..) AP. F. W. IM. F. U. F.
Collettore di scarico a 2
uscite
UL2
HPCO outlet section
DCV 30
3/8” BSP F3
9/16” - 18 SAE6 F31
DCV 50
1/2” BSP F4
7/8” - 14 SAE10 F33
1/2” BSP F4
DCV 80
3/4” BSP F5
7/8” - 14 SAE10 F33
1” 1/16 - 16 SAE12 F34
DCV MG
1” BSP F6
1” 5/16 - 12 SAE16 F36
45
CURVE CARATTERISTICHE
CHARACTERISTIC PRESSURE DROP FLOW CURVES
Perdite i carico tra entrata (P) e uscita (T) Perdite i carico tra entrata (P) e utilizzi (A/B) Perdite i carico tra utilizzi (A/B) e uscita (T)
Inlet pressure drop between inlet port (P) and Inlet pressure drop between inlet port (P) and Inlet pressure drop between work ports (A/B)
outlet port (T) work ports (A/B) and outlet port (T)
CODE
1
80
40
6
4
3
1
80
40
6
4
1 DCV MG
2 2 2
0 0 0 0 0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 l/min 0 20 40 60 80 100 120 140 160 180 200 220 240 l/min 0 20 40 60 80 100 120 140 160 180 200 220 240 l/min
Viscosità dell’olio Temperatura dell’olio Le curve di commutazione sono differenti per ogni tipo di cursore,
Oil viscosity Oil temperature pertanto a richiesta si forniscono curve specifiche
Metering curves are different for each typee of spool. Therefore
30CST 50°C particular curves are supplied on request
46
Misure e dati non impegnativi. Dimensions and data are given for reference only.
E’ vietata la riproduzione anche parziale senza la specifica autoriz- This catalogue cannot be reproduced (in whole or in part) without
zazione scritta della VPS Brevini. the prior written consent of VPS Brevini.
La VPS Brevini si riserva di variare tutti i dati del presente catalogo VPS Brevini reserves the right modify the technical data stated
senza preavviso. Questo catalogo sostituisce i precedenti. on this catalogue at any moment, without notice. This catalogue
supersed all previous ones.
Factory:
Via Matteotti, 47
www.vpsbrevini.com - info@vpsbrevini.com
Via Natta, 1
sales.ind@brevinifluidpower.com