Professional Documents
Culture Documents
No Question_ID
0001 GJSCIQ2303N23030001
0002 GJSCIQ2303N23030002
0003 GJSCIQ2303N23030003
0004 GJSCIQ2303N23030004
0005 GJSCIQ2303N23030005
0006 GJSCIQ2303N23030006
0007 GJSCIQ2303N23030007
0008 GJSCIQ2303N23030008
0009 GJSCIQ2303N23030009
0010 GJSCIQ2303N23030010
0011 GJSCIQ2303N23030011
0012 GJSCIQ2303N23030012
0013 GJSCIQ2303N23030013
0014 GJSCIQ2303N23030014
0015 GJSCIQ2303N23030015
0016 GJSCIQ2303N23030016
0017 GJSCIQ2303N23030017
0018 GJSCIQ2303N23030018
0019 GJSCIQ2303N23030019
0020 GJSCIQ2303N23030020
0021 GJSCIQ2303N23030021
0022 GJSCIQ2303N23030022
0023 GJSCIQ2303N23030023
0024 GJSCIQ2303N23030024
0025 GJSCIQ2303N23030025
0026 GJSCIQ2303N23030026
0027 GJSCIQ2303N23030027
0028 GJSCIQ2303N23030028
0029 GJSCIQ2303N23030029
0030 GJSCIQ2303N23030030
0031 GJSCIQ2303N23030031
0032 GJSCIQ2303N23030032
0033 GJSCIQ2303N23030033
0034 GJSCIQ2303N23030034
0035 GJSCIQ2303N23030035
0036 GJSCIQ2303N23030036
0037 GJSCIQ2303N23030037
0038 GJSCIQ2303N23030038
0039 GJSCIQ2303N23030039
0040 GJSCIQ2303N23030040
0041 GJSCIQ2303N23030041
0042 GJSCIQ2303N23030042
0043 GJSCIQ2303N23030043
0044 GJSCIQ2303N23030044
0045 GJSCIQ2303N23030045
0046 GJSCIQ2303N23030046
0047 GJSCIQ2303N23030047
0048 GJSCIQ2303N23030048
0049 GJSCIQ2303N23030049
0050 GJSCIQ2303N23030050
0051 GJSCIQ2303N23030051
0052 GJSCIQ2303N23030052
0053 GJSCIQ2303N23030053
0054 GJSCIQ2303N23030054
0055 GJSCIQ2303N23030055
0056 GJSCIQ2303N23030056
0057 GJSCIQ2303N23030057
0058 GJSCIQ2303N23030058
0059 GJSCIQ2303N23030059
0060 GJSCIQ2303N23030060
0061 GJSCIQ2303N23030061
0062 GJSCIQ2303N23030062
0063 GJSCIQ2303N23030063
0064 GJSCIQ2303N23030064
0065 GJSCIQ2303N23030065
0066 GJSCIQ2303N23030066
0067 GJSCIQ2303N23030067
0068 GJSCIQ2303N23030068
0069 GJSCIQ2303N23030069
0070 GJSCIQ2303N23030070
0071 GJSCIQ2303N23030071
0072 GJSCIQ2303N23030072
0073 GJSCIQ2303N23030073
0074 GJSCIQ2303N23030074
0075 GJSCIQ2303N23030075
0076 GJSCIQ2303N23030076
0077 GJSCIQ2303N23030077
0078 GJSCIQ2303N23030078
0079 GJSCIQ2303N23030079
0080 GJSCIQ2303N23030080
0081 GJSCIQ2303N23030081
0082 GJSCIQ2303N23030082
0083 GJSCIQ2303N23030083
0084 GJSCIQ2303N23030084
0085 GJSCIQ2303N23030085
0086 GJSCIQ2303N23030086
0087 GJSCIQ2303N23030087
0088 GJSCIQ2303N23030088
0089 GJSCIQ2303N23030089
0090 GJSCIQ2303N23030090
0091 GJSCIQ2303N23030091
0092 GJSCIQ2303N23030092
0093 GJSCIQ2303N23030093
0094 GJSCIQ2303N23030094
0095 GJSCIQ2303N23030095
0096 GJSCIQ2303N23030096
0097 GJSCIQ2303N23030097
0098 GJSCIQ2303N23030098
0099 GJSCIQ2303N23030099
0100 GJSCIQ2303N23030100
0101 GJSCIQ2303N99010101
0102 GJSCIQ2303N99010102
0103 GJSCIQ2303N99010103
0104 GJSCIQ2303N99010104
0105 GJSCIQ2303N99010105
0106 GJSCIQ2303N99010106
0107 GJSCIQ2303N99010107
0108 GJSCIQ2303N99010108
0109 GJSCIQ2303N99010109
0110 GJSCIQ2303N99010110
0111 GJSCIQ2303N99010111
0112 GJSCIQ2303N99010112
0113 GJSCIQ2303N99010113
0114 GJSCIQ2303N99010114
0115 GJSCIQ2303N99010115
0116 GJSCIQ2303N99010116
0117 GJSCIQ2303N99010117
0118 GJSCIQ2303N99020118
0119 GJSCIQ2303N99020119
0120 GJSCIQ2303N99020120
0121 GJSCIQ2303N99020121
0122 GJSCIQ2303N99020122
0123 GJSCIQ2303N99020123
0124 GJSCIQ2303N99020124
0125 GJSCIQ2303N99020125
0126 GJSCIQ2303N99020126
0127 GJSCIQ2303N99020127
0128 GJSCIQ2303N99020128
0129 GJSCIQ2303N99020129
0130 GJSCIQ2303N99020130
0131 GJSCIQ2303N99020131
0132 GJSCIQ2303N99020132
0133 GJSCIQ2303N99020133
0134 GJSCIQ2303N99020134
0135 GJSCIQ2303N99020135
0136 GJSCIQ2303N99050136
0137 GJSCIQ2303N99050137
0138 GJSCIQ2303N99050138
0139 GJSCIQ2303N99050139
0140 GJSCIQ2303N99050140
0141 GJSCIQ2303N99050141
0142 GJSCIQ2303N99050142
0143 GJSCIQ2303N99050143
0144 GJSCIQ2303N99050144
0145 GJSCIQ2303N99050145
0146 GJSCIQ2303N99050146
0147 GJSCIQ2303N99050147
0148 GJSCIQ2303N99050148
0149 GJSCIQ2303N99050149
0150 GJSCIQ2303N99050150
Question.
Being a jewelry designer you have to work with several tools. Identify the one tool
which is not being used in jewelry design
If we wish to see the different views of a model that is being designed with the
Rhino 4, then in which area should we look?
While dealing with AutoCAD package the most basic geometric building block(s)
that we often come across is/are __
The above images are representing four different views of Rhino4 under perspective
viewport . Identify the correct option from the given alternatives.
When copying a drawing constructed in AutoCAD 2008 using the Copy command
from the Edit dropdown menu, the drawing can be pasted into documents being
worked in other applications. The method of copying and pasting makes use of:
When a photograph has been inserted in an AutoCAD drawing on screen, when the
drawing is printed or plotted, the photograph does not print or plot with the
drawing:
Using Adobe illustrator for editing a shape one must click an anchor point with the
_________________
To draw a perfect square in Adobe Illustrator you must …
If you have to import multiple consecutive files in one go in Coreldraw, then what
key combination you must select to do so?
In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10) to
P2(10,15) will have its centre at.
Which technique is used for specifying the spacing increment for snapping text to
the path?
If a person wanted to fill an image of a curtain with a plaid texture, what tool should
he use?
In AutoCAD 2008 When setting lighting before rendering a 3D model Distant light
can be described as:
What are the drawbacks of using Autocad?
Can the Union tool be used to form 3D solid drawings from a number of objects
constructed using any of the 3D Objects tools Box, Sphere, Cylinder, Cone, Torus and
Wedge?
We are used to work with several views in AutoCAD. From the given options you
have to choose the one which is not a principal view.
While we are dealing with AutoCAD the principal planes will appear to us as _____
In AutoCAD depending on its relationship to the projection plane on which the view
is projected, a line may project:
_______________ provides one way for the CAD design to be directly translated to
a three dimensional model.
The most popular and widely used diamond color scale is known as -
To print the entire project in AutoCAD you will have to choose to regulate what to
plot. Which among the following needs to be regulated ?
In AutoCAD if you are in a situation where you need to convert discrete objects in
polyline then which command should you use for doing so?
Many a times in our operation we come across a term 'Variant' in AutoCAD.
You have to identify the TRUE statement regarding the use of variant among the
given options.
Go through the given options and identify the one where you can use the varient
option in AutoCAD
The primary difference between the model tab and the layout tab(s) in AutoCAD
is______
If you have to display The dialog boxes in AutoCAD then which of the given
command(s) will you choose?
Drawing templates are held in files with the file extension:
Which of the statement(s) is/are TRUE regarding the benefits of using Autocad?
What is the difference between the scale command and the command zoom?
If you need to enhance the architectural designing of a 3D object, then which option
will you have to select in AutoCAD?
The average diameter of a well-cut 1 carat diamond should be around
You have been given assignment by your supervisor that you need to distinguish the
Step-cut gemstones from brilliant-cut gemstones. What shall be the parameter
through which you would be able to that?
If cubic zirconia has a specific gravity that is higher than that of diamond, then
identically cut and faceted diamond and cubic zirconia gemstones will
In your work place you found that gemstone A & gemstone B are of same size,
shape (cut) and weight. Then, which among the following can you conclude?
Snap on/off is a special feature of AutoCAD. Identify the key from the given options,
which will be allow you to use the feature?
From your study and training you have been educated on diamond jewelry and it
has been taught to you that Color is the second most important characteristics of
Diamonds. Can you Identify the reason from the given options?
Go through the options which are all about 2D isometric drawings. Which one of
them is NOT an advantage.
By the characteristics of color, Diamonds are graded in a scale called GIA scale. It is a
world wide accepted scale to judge the quality of diamonds. It uses english
alphabets to grade any diamond. Identify the range of the scale from the given
alternatives
You need to show your supervisor a specific design that you have just created using
AutoCAD. It requires height, width, and depth of that object to be shown at one
view. with a minimum of how many orthographic projections will you be able to do
so?
While designing using Auto CAD, if a layer is locked, then which of the following
tasks can still be performed?
In your basket you find that a gemstone is shaped like a boat or oval with pointed
ends. Your supervisor asked you to identify the cut of that gemstone.
What cut gemstone is that?
In the context of jewellery, head refers to the prong system or carriage that supports
a stone.
While designing with Corel Draw, which tool must you pick to select or to deselect
an object?
Which file types should you select if you have to modify your files while applying
filters on them?
Process control is carried out
The process of creating wax and rubber molds to match the master design of the
jewelry in production is called ________________.
How do you define an arc In computer aided drafting practice ?
Matrix provides
Which among the following software should you use as computer-aided design
(CAD) program for faceted gemstones ?
Which of the statement(s) regarding Autocad is/are TRUE ?
Hitting which of the following keys will make palettes and the toolbox go away?
All of the following statements about multiview drawings in AutoCAD are true,
except:
What type of projection in AutoCAD does not have the projection rays parallel to
each other?
In orthographic projection, visual rays or lines of sight for a given view are
_____________ to each other.
Copyright is a __________ right that grants the creator of an original work exclusive
rights for its use and distribution
Avoid infringement to IPR of other companies by
Intellectual Property Rights (IPR) protect the use of information and ideas that are
of
Any person interested can apply to the board for a licence to produce and
publish the translation of the literary and dramatic work after a period
of___________ from first publication.
The number of days given for public to raise any objection regarding the
documents submitted for copyright registration are
Which of the following is not a subject matter of copyright ?
The person who works by coordinating his work activities with others, in order to
accomplish his goals, is called a(an) ______
In the workplace, internal personal communication ___________.
Through the _____ function, managers monitor the performance of the organization
and significant deviations.
Organisational structure primarily refers to____
Which of the following is not part of the basic framework for analysing
Organisational Behaviour issues ?
Communication to supervisor about process flow improves
The ________ leadership style is an expression of the leader’s trust in the abilities of
his/her subordinates.
Which of the following is / are method of managing stress?
Which of the following methods is/are used to solve intergroup conflicts indirectly
Factors other than satisfaction that impact one’s decision to leave a current job
include all of the following EXCEPT:
A working team has one important aspect, not found in a work group. This is :
A hazard is any situation that has the potential to cause injury, illness or death.
Who has responsibility for health and safety at your place of work?
Under Work Health and safety regulations, it is compulsory for employers in all
workplaces to:
Regular inspections of the workplace should take place___________
Option - A Option - B
Matrix Oracle
lines points
The The
Draw Modify
toolbar toolbar
A. Rotate the view in shaded display. A. Rotate the view in shaded display.
B. X - Ray shaded display B. Rendered Display.
C. Ghosted shaded display. C. Ghosted shaded display.
D. Rendered Display D. X - Ray shaded display
Choose the rectangle tool, hold shift and Input squar's side dimension
drag the cursor diagonally
Shift + select the first files Control + select the first & last files
(10,10) (12.5,12.5)
Leading. Kerning
Yes No
AutoCad software is not so much suited AutoCad software has expensive start up
for 3D as it has fewer options , It can not costs ( the hardware , the software , and
be used in the complex designs , If we are training ) , It can be very expensive , so , the
into the heavy assembly work we just initial costs are high , There are free
don’t rely on this software , It can not be software packages though , The people
used in Complex Programming , The large need to be trained how to use the software
amount of memory and speed is that also adds to the costs , And it requires
required , Training and equipments are a PC .
very costly too.
Yes No
AutoCAD will draw a circle of R=20 AutoCAD will draw a circle of R=10 and the
center of the circle will be placed at 0,0
Left-click Double-click
on an item and the item can be moved to on an item. The item can then be moved to
another position on screen another point on screen
1 0
Cut Carat-Weight
1 0
the size of the object position of use, and least number of hidden
lines
Display Extends
Union Subtract
Variants allows you to use the Variants does not allow you to use the
functionality of different applications functionality of different applications
according to the requirement. according to the requirement.
The model tab is used for drawing in 3D The model tab is where you create the
and a layout is used for drawing in 2D drawing and a layout tab represents the
sheet that you will plot or print on
Layer Properties
toolbar toolbar
4.5 mm 5 mm
gemstone A and B are the same materials. gemstone A and B have the same specific
gravity.
F2 F6
cost is the first consideration to peoople sparkle (caused by cut) is the first thing
and color is the second detected by human eyes, color being
second
D to K D to Z
six three
Details can be added to a locked layer Details can be erased from a locked layer
1 0
Raster Vector
.PSD .BMP
Collect the relevant data Format the chart and to correct the errors
Define-Machine-Analyze-Improve-Control Define-Machine-Analyze-Improve-Cad
.dwg .drg
Variants are used in creating, visualizing Variants are used in creating, visualizing and
and rendering 3D models including 3D rendering 3D models, but not 3D prints
prints
Control-X Tab
High quality operation should not waste ti Rapid operation will reduce the level of inve
me or effort to do the job repeatedly ntoryWork in Process (WIP) between micro
surgery, and reduceadministrative activities
diamonds are graded for color where D diamonds are graded for color where D
Color Diamonds are (by far) the most Color Diamonds are the cheapest
expensive diamonds
Seven One
transformation of created 3D CAD models helps to develop and show visually any
into physical objects shape of jewellery models
Create a CAD model of the design Convert the CAD model to
STereoLithography (STL) format
perpendicular oblique
Right. Alligns snap and grid along 30- and Left. Alligns snap and grid along 90- and
90- degree axes 150- degree axes
back, top, profile front, top, profile
1 0
1 0
1 0
red blue
1 0
Yes No
Machine Process
Copyrights Know-how
1 0
Personal. Commercial.
3 years 2 years
18 Days 21 Days
A science. An art.
Planning Organizing
Participative Delegative
Avoidance Bargaining
Bonus Motivation
Energy Enthusiasm
Purchase Marketing
Employers Employee
1 0
1 0
The substances and processes on the site The phases of coping with emergency
that can cause emergency situations. situations.
Accidents. Hazard
Leave it as someone else will fix it Bring your own toolbox to work and fix it
eventually. yourself.
Personal hygiene. Organizational structure.
First aid items, emergency exits and fire Emergency services such as the ambulance
extinguishers
To document the workplace’s OH&S To check on whether all workers are
policies and practices complying with the workplace’s OH&S
policies and practices
Rhino CAD
The The
Standard Properties
toolbar toolbar
Any item in any application can be The drawing is transferred via the
automatically copied into another Clipboard.
application
This is true only if the photograph was This is true only if the photograph
inserted in a drawing in paper Space was inserted in a drawing in Model
Space.
Double click the polygon tool Select the square polygon tool and
click any open area
Shift + select the first & last files Shift + control + Alt +select the first &
last files
(15,10) (15,15)
Gradient Pattern
Only from the Box and Cone tools Yes, but not from the Torus tool
auxiliary front
Holding down the left-hand button of Press the right-hand button of the
the mouse on an item can be moved mouse. This allows an item to be
to another point on screen moved anywhere on screen.
Color Crystal
perpendicular tangent
Limits Window
Monitor CAD
Join Polyline
The color of the background The model tab displayes the drawing
you are copying from and the layout
tab is where you lay out the new
drawing
*.bmp *.dwr
Modify Standard
toolbar toolbar
5.5 mm 6.5mm
F9 F8
two four
Opal. Pampilles.
.CDR .PMD
Tighten and format the chart Ingest and process the chart
Radius and one end point Two end points and centre
GenCad GemstoneCad
.dgw .drg
Shift-Tab D minor
Reliable operations, can be relied upo Flexible operations which can easily a
n to resultdelivery exactly as planned dapt tochanging circumstances
quickly and without disturbing
therest of the operations
Four Two
normal parallel
Top. Alligns snap and grid along 30- Bottom. Alligns snap and grid along
and 150- degree axes 30- and 150- degree axes
top, front, right side frontal, horizontal, profile
yellow green
More than one font All of the above
legal Proffessional
30 Days 45 Days
Controlling Leading
Synergy Objectives
To represent the workers’ views and To train and assess all workers in their
concerns on the workplace’s OH&S knowledge of the workplace’s OH&S
practices to the employer policies and practices
This is not true. The photograph will print Easy N2303 PC6
or plot along with the drawing
Choose the rectangle tool, hold shift and Easy N2303 PC4
drag the cursor diagonally
Shift + select the first & last files Medium N2303 PC2, PC9
The model tab is where you create the Difficult N2303 PC3
drawing and a layout tab represents the
sheet that you will plot or print on
Bottom. Alligns snap and grid along 30- Difficult N2303 PC5
and 150- degree axes
frontal, horizontal, profile Difficult N2303 PC7
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Q2303 GJSCI
Sr. No Question_ID
001 GJSCIQ2303N2303001
002 GJSCIQ2303N2303002
003 GJSCIQ2303N2303003
004 GJSCIQ2303N2303004
005 GJSCIQ2303N2303005
006 GJSCIQ2303N2303006
007 GJSCIQ2303N2303007
Qst. 8 to 10 Statement Linked question. Based on the diagram shown below perform the below mentioned task
008 GJSCIQ2303N2303008
009 GJSCIQ2303N2303009
010 GJSCIQ2303N2303010
011 GJSCIQ2303N2303011
012 GJSCIQ2303N2303012
013 GJSCIQ2303N2303013
014 GJSCIQ2303N2303014
015 GJSCIQ2303N2303015
Qst. 16 & 17 Statement Linked question.
016 GJSCIQ2303N2303016
017 GJSCIQ2303N2303017
018 GJSCIQ2303N2303018
019 GJSCIQ2303N2303019
020 GJSCIQ2303N2303020
021 GJSCIQ2303N2303021
022 GJSCIQ2303N2303022
023 GJSCIQ2303N2303023
024 GJSCIQ2303N2303024
025 GJSCIQ2303N2303025
026 GJSCIQ2303N2303026
027 GJSCIQ2303N2303027
028 GJSCIQ2303N2303028
029 GJSCIQ2303N2303029
030 GJSCIQ2303N2303030
031 GJSCIQ2303N2303031
032 GJSCIQ2303N2303032
033 GJSCIQ2303N2303033
034 GJSCIQ2303N2303034
035 GJSCIQ2303N2303035
036 GJSCIQ2303N2303036
037 GJSCIQ2303N2303037
Statement Linked Question. Quest. 38 to 45 . Perform the below mentioned task based on the given shape
038 GJSCIQ2303N2303038
039 GJSCIQ2303N2303039
040 GJSCIQ2303N2303040
041 GJSCIQ2303N2303041
042 GJSCIQ2303N2303042
043 GJSCIQ2303N2303043
044 GJSCIQ2303N2303044
045 GJSCIQ2303N2303045
046 GJSCIQ2303N2303046
047 GJSCIQ2303N9901047
048 GJSCIQ2303N9905048
049 GJSCIQ2303N9901049
050 GJSCIQ2303N9902050
Question.
Create fillets .
Task : Create fillet features
Using Auto CAD choose a gemstone and design it with Navette cut
Design a faceted gemstone and mention all of its parts
Create a jewelry box in Auto CAD
Convert a discrete objects in polyline? Wite down the command and steps for performing the
task
Take two points in absolute Cartesian coordinate A (10.8) and B (6.5) join them with a line and
find out the relative polar coordinates.
. Quest. 38 to 45 . Perform the below mentioned task based on the given shape
Draw LINEs tangent to the 2 biggest circles.
Use PEDIT to join the slots as one PLINE
Use OFFSET to create the biggest hole.
Use HATCH pattern and determine the areas
Use ID command and find coordinate locations
Show the design with all aurthogonal views
Take a printout of the design
Determine the outside area of the whole plate
Show us the use of offset command in Auto CAD and also demonstrate drawing of two parallel
lines
Tell us how will you take a copyright for your newly prepared designs
Explain the safety measures and their usefulness for designing jewelries
How will you handle an IPR violation if you find such instance
Explain the strategy to coordinate and work with your co assistant inorder to get the job done
with minimum time and hazards
Job Role
Difficulty Corresponding Corresponding Id
Level NOS PC (QP)
Easy N2303 PC1 Q2303
Easy N2303 PC1 Q2303
Easy N2303 PC2 Q2303
Easy N2303 PC1 Q2303
Easy N2303 PC1,PC8 Q2303
Easy N2303 PC1,PC4 Q2303
Easy N2303 PC3 Q2303
N2303 Q2303
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
Sr. No Question_ID Question.
Autocad is a software program built to design and shape the 2-D and 3-D
images. It provides the tools by which a detail design of the product can be Easy Q2303
done. It also has the option to create detailed design layout, which can be
automatically drawn by using source model.
Autocad has replaced the traditional method of drafting and designing which
was made by pencil, drafting boards, triangles and compass with just a set of a
computer program. The benefits are immense like:
Saves time and helps to increase the productivity,
It helps to streamline your design and documentation workflow, Moderate Q2303
Physical ‘3D’ prototype of the design can be quickly created by using Autocad,
3D models can be directly imported into Autocad by using application like
SolidWorks,
Tedious work of drafting can be done easily and you can design and re-design
the product in short span of time.
Autocad provides a way to drag and drop the elements by the use of “NOUN”
and “VERB” in a dialog box. It allows the object to move from one place to Easy Q2303
another. Likewise, the remove or editing function can be done by using “MOVE
and ERASE”.
Default drawing directory has sub directories having the information using the
windows commands. The applications, which are going to be used, are
highlighted, and by using drag and drop features those application will be placed Hard Q2303
in the default directory. The properties for the application are selected from the
menu and dialog boxes displayed on the front.
To hide the specific layers while plotting, you can use various options like turning
off the layers for plotting , freezing the layers and turning off. Turning off for
plotting will show the layers on the screen but won’t output on printing. The Moderate Q2303
layers that are turned off will hide the layers and also it will not appear on the
screen.
If a file command is imported from a script or AutoLISP/ ObjectARX/ ADSRX a Hard Q2303
command prompt appears instead of a dialog box.
Autocad files have an extension of “.dwg” and will only open those files having
this extension. To open the drawing files you have to rename it, by using
Explorer or DOS prompt you can do that. If you are using EXPLORER you have to Moderate Q2303
make sure that the option of “Hide file extensions for known file types” is not
enabled. After the file is copied you can rename and use the OPEN command in
Autocad to open the drawing.
There are two types of patent documents usually known as patent specification,
namely Moderate Q2303
(i) Provisional Specification and (ii) Complete Specification
Any company has a social and legal obligation to provide a safe and health Easy Q2303
working environment to all his improvement to all his employees.
It is an equipments used to project the person from hazards such dust, dirt, Easy Q2303
fumes and sparks etc. It is the barrier between hazard and person.
NEED TO PROVIDE AN EXAMPLE AND HAVE TO EXPLAIN HOW THE CONCERNED Moderate Q2303
HAS BEEN ABLE TO HANDLE SUCH SITUATION
Sector.
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI
GJSCI