Professional Documents
Culture Documents
Softork MC coupling
™
I N STA L L AT I O N - O P E R AT I O N - M A I N T E N A N C E
M07-1205A I S S UE
Z0592740_A D 0 3 /02/2017
ISSUED 2015 R E A D READ
AN D U N D EUNDERSTAND
AND R S TAN D TH ITHIS
S M AN UAL P RPRIOR
MANUAL I OR TO
TOOOPERATING
P E RATI N G OR
O RSERVICING
S E RV I C I N THIS
G T H PRODUCT
I S PR O D U CT.
CLAMP RING COUPLING
HALF
CLAMP RING
BOLT
FLEXIBLE
ELEMENT
Detail 1
place, wrap the flexible element around the clamp rings
as shown. Make sure the beads of the element are fully
1/16" MAX worked down into the seats.
STRAIGHT EDGE 9. Hold the split of the flexible element closed. An 1⁄8"
maximum gap is allowable. Tighten one or two bolts
directly opposite the split—enough to hold the flexible
element in place. Using both hands, knead the rubber
element toward the split. Hold split closed and tighten
the next two bolts farthest from split—enough to hold
the flexible element in place. Repeat this procedure
on all remaining flange bolts. Retighten each bolt in
the order shown in Detail 3 using a torque specified in
table.
Note: MC07 couplings have 5 bolts/half, use a similar
cross pattern.
Tighten all bolts a second time to the specified torque.
Detail 2 Caution: Do not over-torque bolts or you may damage
the clamp ring.
Detail 3
Torque
Coupling B C D Cap Screw
ft · lbƒ
MC07 5 1⁄8" 11⁄2" 5 5⁄8" 24 5
⁄16" x 11⁄2"
MC09 5 9⁄16" 117⁄32" 7 3⁄8" 33 3
⁄8" x 11⁄2"
MC11 6 3⁄8" 19⁄16" 9 3⁄16" 33 3
⁄8" x 11⁄2"
Softork MC coupling
U S E R M A N UA L