Professional Documents
Culture Documents
KELOMPOK 1 :
1. Head stock, there is a main engine spindle that serves as a holder of several
equipment lathe equipment such as: chuck, kollet (collet), flashlight fixed
2. Spindle is the part that continues the rotation to the workpiece so that the workpiece
can rotate (where attachment holder work).
3. Cekam is one of the tool equipment lathe whose function is to clamp / bind the
workpiece on the process of lathe.
4. Tool clipper (Tools Post) is used to clamp or hold the chisel. The shape or model
in outline there are two kinds, namely, the standard chisel holders and holders can
be adjusted (adjustable tool post).
5. Compound is where the post tool attaches.
6. Cross Slide is the cross section of the lathe axis (Lathe) located above the carriage,
for Apron is attached to the carriage part, containing control arm (feeding motion
and screw motion).
7. The tail stock is used as a rotary center, a fixed torch, a drill chuck and a tapered
drill bit whose installation is inserted into a loose head sleeve.
8. Handwell serves as pushing the loose head
9. Guied ways serve as an easier saddle movement
10. table lathe is used as a place to head off, Carriage sledge
11. Handwheel serves to move the carriage manually in the longitudinal direction.
12. Chip pan serves to place the pieces of iron
13. a steady rest and a pedestal-style pedestal at the time of the latter
14. Lead screw function to to reverse the direction of cutting
15. Fead rod serves as an elongated feeding movement
16. Leg
17. Saddle serves as the base of the post tool
LATHE TREATMENT
the lathe is a machine that plays a role to form workpiece into the desired object.
this machine counted heavy machinery. each machine desperately needs care. so does the
lathe also need care. here is how to care for a good and correct lathe
a. general care
to protect the invasion is not necessarily damaged is necessary for proper
operation and operation. the procedure of the latter's treatment:
b. special care
the treatment of special education proceeds with the scheduled schedule, according to a
sufficient number of treatments obtained from the manufacturer of the machine.
a Different hand
check the incoming district
b. the motor load is too much
therefore the overestimulated load from which it is determined will cause the
driver to exceed the extent of the impeding motor, thereby needing to be reset to the second
stage with the specified
3. Sledge
errors or failures that are as follows:
a very heavy sledgeholder launching a game.
1. the completion of the bolt-bolt control of the sequence, if it is to be carried out by the
bolts.
2. uneven worker results. this subject is tricky to trade on pinion gear. its usability is to
develop pinion teeth or new pinion teeth
3. the foodstuff is not flat on the point of view of the automation of the automated objects.
the subject of research is due to the lack of a source of export funds.
4. gets overwhelmed when the cuts are crossed. the possibility of an inquiry as to the extent
of the binding of the bolt for the cutter disappears.
5. uneven facing surface surface (facing). this subject may be caused inappropriately
setting up the bolts of the braided tank of the food.
6. Overflowing hard toolpost movement. this subject is due to cooking problems.
7. lesser toolpost positioning less expensive.
8. pump on an amethescardioprated apron. perihalinidikbased by lubricating oil that
sudshkotor. do the baking or replace the oil lubricants and clean the pipes.
4. heads of the head of the trajectory is unlikely to be anyhow unsettling or not. if this is
the case, the possibility is that the binding of the binding of the crowners is not related to
the name of the game
BIBIOLOGRAPHY
Afdlolludin. 2014. Mesin bubut, Mesin Sekrap, Mesin Frais. Blogspot.co.id
R. Syamsudin. 1999, Teknik Bubut : Jakarta. Yogaswara, Eka. Mesin Bubut Konvensional dan CNC.
Armico; Bandung. 2000. Unika Atma Jaya, 1995, Mesin Perkakas. Bima Aksara, 1984, Teknik
Pemesinan. B.M. Amstead, 1992, Mesin Frais. http://google.com. Gambar-gambar Mesin. 2011.
http://google.com. Mesin Produksi. 2011