Requirement - At engine speed corresponding to normal continuous cruise power: At least 2 hours speed (knot) mean engine load (% time (hrs / No RPM speed MCR) I II III min) (Knot) 1 25% 2 50% 3 75% 4 100% 5 110%
2 Tabel endurance test
Requirement - 4 hours @ 100% MCR Time No Description Unit Portside Starboard portside Starboard 1 engine load % 2 engine rpm rev/min cooling water temp. o 3 C (in/out) 4 lubricating oil press. kg/cm2 o 5 exhaust gas temp C o 6 manifold temp C 7 boost pressure Mpa o 8 gearbox temp (in/out) C 9 gearbox oil pressure Bar o 11 sterntube bearing temp C o 12 fuel temp. C o 13 engine room temp C
3 Tabel Crash stop test
Requirement - distance should not exceed 15 ship lengths no Description Result Unit 1 engine rpm (portside) Rpm 2 engine rpm (starboard) Rpm 3 speed full ahead Knot 4 speed full astern Knot time to stop from full ahead (space 10 5 Sec sec N-R) 6 Distance Meter 7 Equal ship’s length Ship’s length 4 Tabel turning circle test - steering trial @75% MCR 35 deg. Steering indicator Requirement - tactical diameter not more than 5 ships length normal steering no Item Portside Starboard 1 speed (knot) 2 time (sec) 3 angle indicator (deg.) 4 tactical diameter (m) 5 Equal ship’s length
5 Tabel steering gear test
- at maximum ahead service speed from 35° on either side requirement (normal) to 30° on the other side in not more than 28 sec - from 15° on one side to 15° on the other side in not more requirement (emergency) than 60 s @ maximum ahead service speed or 7 knots normal steering emergency steering no Item port – stbd stbd - port port – stbd stbd - port 1 speed (knot) 2 time (sec) 3 angle indicator (deg.) Comment
6 Tabel anchor test
Requirement - windlass speed not less than 0.15 m/sec time (sec) avg. speed windlass speed anchor pos 1 st link 2 nd link 3 rd link (link/min) (m/sec) Portside Starboard