Professional Documents
Culture Documents
5
6 3b
8
4
3
2
9
1
3b
1 2 3 4 5
8
9 10
7
6
6
7
6
5
6 5
STEP 1 Lay part n° 5 flat on th ground, introduce system bolts and STEP 2
attach parts n° 6. Tighten with extenders (see page 2). Be careful to After introducing bolts, lower down top part n° 7 onto dividers
have the pre-mounted drawer rails on the inside of the dividers! n°6, and tighten with excenters to assemble first module.
7 5 4 1
7 5
9 9
STEP 3 Put the left side part n° 9 flat on the ground (we STEP 4 add the rest of the bolts and proceed to attach
recommend soft surface like carpet), put bolts and lower down parts n° 4 and 1 in a similar manner. Tighten with
assembly of parts n° 5,6,7. TIghten using excenters. excenters.
8
2 3b
6
5
7
4 3
1
STEP 5 STEP 6
Repeat the same as Join 3b with 3 using
assembly kits
8 and 2.
3b
STEP 7 After assembling the keyboard module, make sure it is kept in its
Lower down the keyboard module assembled in step 6and attach vertical position, avoiding any oscillation until step 8 is
; completed. Sideway movements of the keyboard module risk
N.B. KEEP THE KEYBOARD MODULE VERTICAL AVOID FLUCTUATIONS damaging the drawer rail assembly!
10
5
1
7 4 3
STEP 8 STEP 9
Afterwards put bolts in part n 10 and carefully align all holes with
bolts, lower down and tighten with excenters. drawer from the top down. During this phase avoid jamming the drawer and
never use force . You are done - Enjoy! When fully extracting the drawer, use
the fold down legs to stabilise.
Material used
Cleaning instructions
- clean with a soft, humid cloth or specific wood cleaners; -avoid the use of
-Melaminated chipboard 18+25 mm abrasive materials or cleaners ;
solid wood (Oak or Ash;
We recommend being 2 people for assembly
PACKING LIST
44