Schlumberger
Rig IDC 37 Well: | R-555 Toate: | 21-oct-2013 | Timo: | 10:00
Rig Manager LX ROO representative [J IPMNWSS LX Geoservices - Log @
Driller Ld Geologist. Od WSSibCementing Qo
‘MI Engineer tesco [ey
Objective: BOP pressure test.
DRILLING OPERATION:
1. Function test top rams, blind rams, kill line and chok
ine HCR's from different remote operated panels.
2, M/U wear bushing running tool, RIH and engage
ito wear bushing,
3. Retract lower 2 ea (180 deg opposite) tie- down screws on 13-5/8" MBS Upper spool. Retrieve wear
bushing under Cameron supervision,
4. M/Utest assy as follo
‘stand of 5” HWDP + test plug + 1 jt of 5 DP + SES + FOSV + Grey valve (IBOP) +
5° Pup Joint (test plug hand tide) and set test plug into well head (8.9 m from rig floor).
5. Connect TDS.
6. Make sure to remove plug from test plug. Remove spring from NRV valve.
7. Flush BOP with water via kil choke manifold - poor boy degasser.
8
9.
|. Open 2-1/16" x 5 K side outlet valve in 13-5/8” CHH.
Fill annulus with water,
10. Line up test u
11. Pressure test as per program attached to 300/3800 psi in 5/10 min (annular BOP to 3500 psi).
12. Break out test assy from test plug and POOH.
0 side entry sub with low torque valve.
13. Closed blind rams connect test line to kill line.
14. Close blind rams pressure test 300/ 3800 psi in 5-10 min,
15, Retrieve test plug.
16. Close 2-1/16" x 5K side outlet valve in 13-5/8” CHH.
17. Next operation rig up Tesco for running 9-5/8" csg. Detai
structions followed.
18. Driller to make sure trip tank runs all time when wellbore open
19. Geoservice to monitor losses and report to WSS.
Wwe to DO:
Clean casing threads.
Prepare test unit for BOP pressure test in advance. Check and confirma hoses. ittings are OK.
Remember:
fat any time you are not sure of something please ask,
Page totRIG DM 37
PUP JOINT 10 FT
300 LOW 3800 HIGH TLWVALVE,
Lose: (3500 psi for annular)
HYDRIL
HYD. KILL LINE ENTRY SUB
HYD. HCR
TW VALVE
300 LOW - 3800 HIGH SINGLE JOINT
TOP PIPE RAMS.
MANUAL KILL LINE
MANUAL HCR
Lower kelly valve on TDS
TEST PLUG
300 LOW - 3800 HIGH
LOWER PIPE RAMS.
IBOP on TOS (One stand 5" HWOI
300 LOW - 3800 HIGH
BLIND RAMS
‘CONFLEX HOSE
MASTER VALVE OF CHO. MAN