Professional Documents
Culture Documents
st
ro
Id
Hydrophilic expandable
rubber section
for watertight
construction joints
Installation
Idrostop strip can be applied on concrete,
metal, PVC, and natural stone with
Idrostop Mastic, a ready-to-use,
solvent-free single component adhesive
based on MS polymers.
PRODUCT IDENTITY
Colour: blue
APPLICATION DATA
FINAL PERFORMANCES
Impermeability: up to 5 atm
For application on
Elongation % according to ASTM 638 M-89 (%): 70-100 vertical surfaces it is
recommended to
install the gasket in
length of about 1 m
Shore hardness according to DIN 53505: 25-35
top benzene, toluene). Once reticulation is
STORAGE
Idrostop can be stored for 12 months in a
dry place at temperatures between +10°C
and +40°C.
WARNING
Although the technical details and
recommendations contained in this data
Pieces longer than 1 m can be installed on vertical sheet report correspond to the best of our
surfaces by fixing the top of the pieces with a nail
or pin and then extruding the Idrostop Mastic
knowledge and experience, all the above
directly onto the underlying substrate. information must, in every case, be taken
as merely indicative and subject to
confirmation after long-term practical
mechanically with screws and nails. If applications: for this reason, anyone who
Idrostop has been attached with Idrostop intends to use the product must ensure
Mastic, wait 24 hours before pouring the
411-9-2008