Professional Documents
Culture Documents
2G:
a. Hiệu suất sử dụng TCH
Measurement CELL
Scope
Formula Actual traffic volume divided by the theoretical capacity (if the theoretical capacity
exceeds 12000 Erl, take 12000 Erl for calculation)
Associated None
Counters
Unit/Range None
Notes None
+ Suggestion Formula:
2. 3G
a. 3G DL
i. Hiệu suất sử dụng Power
1. The downlink cell load is indicated by the mean utility ratio of transmitted
carrier power in a cell.
2. The mean utility ratio of the transmitted carrier power for non-HSPA
users in a cell (including non-HSPA users on CCHs) is calculated using the
following formula:
MeanTCP (NonHS) Usage = MeanNonHSTCP/MAXTXPOWER x 100%
3. The mean utility ratio of the transmitted carrier power for all users in a
cell is calculated using the following formula:
MeanTCP Usage = MeanTCP/MAXTXPOWER x 100%
where
To obtain MAXTXPOWER, run the LST UCELL command to
query the value of the Max Transmit Power of Cell parameter, and
convert the parameter value from the unit "0.1 dBm" to "W".
4. Associated counters are as follows:
VS.MeanTCP
VS.MeanTCP.NonHS
VS.HSDPA.MeanChThroughput
ii. Hiệu suất sử dụng Code
3. 4G
a. Hiệu suất sử dụng RB
i. RB_URDL = (RB_UsedDL/RB_AvailableDL) x 100%
ii. RB_URUL = (RB_UsedUL/RB_AvailableUL) x 100%
b. Resource Block Utilizing Rate
i. Downlink Resource Block Utilizing Rate =
(L.ChMeas.PRB.DL.Used.Avg/L.ChMeas.PRB.DL.Avail) x 100%
ii. Uplink Resource Block Utilizing Rate =
(L.ChMeas.PRB.UL.Used.Avg/L.ChMeas.PRB.UL.Avail) x 100%