Professional Documents
Culture Documents
DESCRIPTION PROPERTIES
MASTERTOP 1220 is a slip resistant, seamless floor, a. Components
based on an advanced solvent-free epoxy resin system Supply Colour Density
and selected graded aggregates. The degree of slip form kg/L
resistance can be adjusted to suit different service MASTERTOP P 601 liquid amber 1.10
conditions and cleaning requirements. The cured floor Part A
provides high resistance to chemical attack and
mechanical wear. MASTERTOP P 601 liquid amber 1.05
Part B
MASTERTOP 1220 is one of the floors available of the
A4 liquid amber 1.1
Polykit system. The Polykit consists of a limited number
of standardised components, which allows production of B4 liquid amber 1.0
a wide range of epoxy resin floors for different application MASTERTOP X1 paste coloured 2.0
in a variety of colours. Filler F1A solid off white 2.6
FIELDS OF APPLICATION Filler F5 solid off white 2.6
Filler F5A solid off white 2.6
MASTERTOP 1220 is recommended for floors where a
good slip resistant surface is essential and where Filler F16 solid off white 2.6
mechanical abrasion and chemical spillage could be a b. Mixed systems
risk of floor damage. It is ideal for floors in:
Components Mix ratio by
• automotive, aircraft and engineering facilities weight
• food and beverage industry
Primer 100:27
• general production and packaging areas A:B
(MASTERTOP P 601)
• wet process and wash down areas Broadcast with filler F1A 1.5 – 2
• cosmetic and chemical industries
Body Coat (A4/B4) A4:B4:X1:F1A 5.4:3:0.6:12
FEATURES AND BENEFITS Top Coat (A4/B4) A4:B4:X1:F16 5.4:3:0.6:3
Broad casting of Filler Top Coat A4:B4:X1:F16 0.4 – 0.6 0.3 - 0.4
The Body Coat should be left to settle for at least 2 to 5 # F5 for coarse finish
minutes, prior to broadcasting. F5A for finer appearance compared to F5
Page 2 of 3
MASTERTOP® 1220
For thickness of 3.0 to 4.0 mm (Two Body Coats) PACKAGING
System Product kg/m2 Thickness
mm A4 Resin 5.4 kg/pail
B4 Hardener 3.0 kg/can
Primer MASTERTOP
0.2 - 0.4 0.2 - 0.3 MASTERTOP P 601 30.0 kg/set
P 601 MASTERTOP X1 0.6 kg/pack
1st Body Coat A4:B4:X1:F1A 1.7 - 2.0 1.0 - 1.2 Filler F1A 12.0 kg/bag and 15 kg/bag
Filler F5 25.0 kg/bag
Broadcast Filler F5A 25.0 kg/bag
Filler F5 3.0 – 4.0 1.0 - 1.5
filler Filler F16 25.0 kg/bag
2nd Body
A4:B4:X1:F1A 1.7 - 2.0 1.0 - 1.2 SHELF LIFE
Coat
Broadcast Filler F5 / F5A # All components in MASTERTOP 1220 can be kept for 12
3 .0 – 4.0 1.0 – 1.5
filler months from date of manufacture, if stored in original
unopened packaging, in a dry enclosed place without
Top Coat A4:B4:X1:F16 0.4 – 0.6 0.3 - 0.4
exposing to direct sunlight and at temperatures between
15 to 35oC.
For thickness of 1.0 to 1.5 mm (No Body Coat)
Primer MASTERTOP 0.4 - 0.6 0.3 - 0.4 PRECAUTIONS
P 601
MASTERTOP 1220 contains certain chemicals which
Broadcast can cause skin irritation if exposed and respiratory
Filler F5 / F5A # 3 .0 – 4.0 1.0 - 1.5
filler reaction if inhaled. Wear gloves, masks and use hand
Top Coat A4:B4:X1:F16 0.4 – 0.6 0.3 - 0.4 barrier cream while handling the product. Wash
thoroughly after handling.
# F5 for coarse finish
F5A for finer appearance compared to F5
Should skin contact occur, wash immediately with soap
and water or an effective hand cleaner.
In case of accidental eye contact, wash with copious
quantity of water and immediately seek medical advice.
If ingested, do not induce vomiting. Consult a doctor
immediately.
Vapours of solvents used for cleaning can be irritating. It
is therefore recommended that cleaning be done in
well-ventilated areas.
Fire: Keep away from sources of ignition. Do not smoke
whilst handling the product.
Flash point: 110oC.
For detailed Health, Safety and Environmental
Recommendations, please consult and follow all the
instructions on the product Material Safety Data Sheet.
1-1-1-1106
The technical information and application advice given in this BASF Construction Chemicals publication are
STATEMENT OF based on the present state of our best scientific and practical knowledge. As the information herein is of a
general nature, no assumption can be made as to a product's suitability for a particular use or application and no
RESPONSIBILITY warranty as to its accuracy, reliability or completeness either expressed or implied is given other than those
required by law. The user is responsible for checking the suitability of products for their intended use.
NOTE Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF
Construction Chemicals either orally or in writing may be followed, modified or rejected by the owner,
engineer or contractor since they, and not BASF Construction Chemicals, are responsible for carrying out
procedures appropriate to a specific application.
Page 3 of 3