You are on page 1of 4

Data Sheet

Priority valve
OLS 320

High-flow priority valve OLS 320


High-flow priority valves are needed especially for
large tractors, wheel loaders, motor graders and
container trucks.

The new Danfoss priority valve OLS 320 can fulfill


demands from these applications.

The priority valve OLS 320 is to be used in connection


with Danfoss steering units type OSPC LS, OSPF LS,
OSPD LS, OSPQ LS and OSPL LS in load sensing
steering system with pump flow up to 320 l/min.

OLS 320 priority valve is available as in-line and


flange-on versions for EHPS.

Pressure drop P-EF is very low, less than 6 bar at 320


l/min at EF load higher than spring force.

Features

• High flow capacity


• Low pressure drop
• Compact modular design
• With or without built-in pilot pressure
relief valve
• Optional port connections
• Available for both static and dynamic
systems

Comprehensive technical literature online


at powersolutions.danfoss.com

© Danfoss | Jun 2016 11007682 | AI00000007en-US0202 | 1


Data Sheet
OLS 320

Code numbers and weight, OLS 320 dynamic in-line/stand alone, black painted

Priority Code numbers Control spring pressure (bar [psi]) Pilot relief valve (bar [psi]) Weight (kg [lb])
OLS 320, EU 11006593 7 [102] 170 [2465] 5.9 [13.0]
version
OLS 320, US 11007475 10 [145] no relief valve 5.9 [13.0]
version (CF =
11/16 - 12 UN)

Technical data

Priority valve Rated flow to P connection, Max pressure on CF (bar [psi]) LS (bar [psi]) T (bar [psi])
l/min [USgal/min] connections: P,EF
(bar [psi])
OLS 320 all versions 320 300 [4350]` 280 [4060] 280 [4060] 40 [580]

Dimensions
European version

P,EF G 1 w. spot face; x = ø47 mm (1.85 in); max 1 mm (0.04 in) deep
CF G ½ w. spot face; y = ø34 mm (1.34 in); max 1 mm (0.04 in) deep
LS,PP G ¼ w. spot face
T G ¼ w. spot face; z = ø25 mm (0.98 in); max 1.5 mm (0.06 in) deep

US version

P,EF 1 5/16-12 UN O-ring boss; x = ø49 mm (1.93 in); max 0.2 mm (0.01 in) deep
CF 1 1/16-12 UN O-ring boss; y = ø41 mm (1.61 in); max 0.2 mm (0.01 in) deep; or
¾-16UNF O-ring boss; y = ø30 mm (1.18 in); max 0.2 mm (0.01 in) deep
LS,PP,T 7/16-20 UNF O-ring boss

2 | © Danfoss | Jun 2016 11007682 | AI00000007en-US0202


Data Sheet
OLS 320

236 [9.29]
7 [0.28]
33 [1.30] 47.5 [1.870] 47.5 [1.870] 3xØ20 [0.79]

4 [0.16]
48 [1.89]
5 [0.20]

59 [2.32] 2xØ16 [0.63] 3xØ8.5 [0.335]


Y

52.5 [2.067] 63.5 [2.500]

P EF

14 [0.55]
Z
T
117.5 [4.626]
78 [3.07]

PP

LS
47.5 [1.870]

22.5 [0.886]

CF

X X

47 [1.85] 80 [3.15]

150H26.10

© Danfoss | Jun 2016 11007682 | AI00000007en-US0202 | 3


Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

4 | © Danfoss | Jun 2016 11007682 | AI00000007en-US0202

You might also like