Professional Documents
Culture Documents
MY PROFILE Solution Report For Control System Part 2
Represent w hole test solution w ith correct and incorrect answ ers.
REPORTS
View Your Test Analysis
BUY PACKAGE
NEWS
Q. No Question Status
Ask an Expert
Q.1 For each of the root locus shown below, which one of the plot can be a root locus
plot
a.
b.
c.
d.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1448&t=a&testType=2 1/6
1/12/2017 MADE EASY ONLINE TEST SERIES
Q.2 The root locus plot of a closed loop feedback system is as shown
The system is under damped and stable for the range of k equal to
a.
b.
c.
d.
frequency then
a. tr is directly proportional to ωn
b. tr is directly proportional to
c. tr is inversely proportional to ωn
d. tr is independent to ωn
Q.4 For the open transfer function given below, The point of intersection of
asymptotes on real axis is at
a. 1.6
b. –1.4
c. –0.6
d. 0.6
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1448&t=a&testType=2 2/6
1/12/2017 MADE EASY ONLINE TEST SERIES
Attem pt Correct Correct Ans. d
FAQ? Have any doubt? Solution
Q.5 A system with one pole at –1 + j has 2% settling time equal to 4 sec. If the pole is
shifted to –4 + 3j, then the settling time of the second order system will be
__________ sec.
Q.6
A system with transfer function is excited by
sin(ωt). The steady state output of the system is zero at ___________ Hz.
Q.7 The open loop transfer function of a unity feedback system is
The value of ‘K’ for which the closed loop pole of the system will be located at s =
– 6 is _____.
Q.8
The unit impulse response of a system having transfer function is as
shown in the figure below
The value of α is
a. t1
b. t2
c.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1448&t=a&testType=2 3/6
1/12/2017 MADE EASY ONLINE TEST SERIES
d.
Q.9 Consider the figure shown below
a. the three systems have same peak overshoot.
b. the three systems have same resonant frequency.
c. the three systems have same rise time.
d. the three systems have same envelope for a unit step input.
Q.10 Consider the block diagram of the control system shown in the figure below. The
peak overshoot of the system is 9.49%. The value of the constant k and the steady
state error for a unit ramp input are
a. 0.18 and 0.20
b. 0.36 and 0.36
c. 0.52 and 0.18
d. 0.52 and 2.14
Q.11 The openloop transfer function of a unity feedback control system is given by
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1448&t=a&testType=2 4/6
1/12/2017 MADE EASY ONLINE TEST SERIES
0).
a. k < 0
b.
c.
d.
Q.12 Consider a transfer function given as
The input to the system is given as a step function 100u(t), then the best
approximate equation of output in time domain can be expressed as
a.
b.
c.
d.
Q.13
A unity feedback system has open loop transfer function The
time at which the response to a unit step input reaches its peak is Then
the value of p is _______ rad/sec.
Q.14
For the system the approximate time taken for a step response to reach
98% of its final value is _____________ sec.
Q.15 Consider the system shown below
The approximate time taken for a unit step response output to reach 98% of its
final value is ________ seconds.
Q.16 If open loop transfer function of the system is given as
then the value of gain K for one of the closed loop pole located at s = –12 will be
______.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1448&t=a&testType=2 6/6