2 Check all mooring cleats - if loose, retighten û 3 Verify stability of docks - if irregular, check floats û 4 Check alignment of ramp(s) and/or gangway(s) û 5 Clean docking and structures with fresh water jet spray 6 Remove floating debris wedges between floats/docks and boats Check wear of wheels/shaft assembly on gangway(s) - if any grease 7 assembly 8 Clean hinges and/or rollers 9 Check floats- if loose, re tighten -if punctures replaced 10 If decking screws are loose, re tighten 11 Check PC to PC connectors - if loose re-tighten/ if cracked, replaced 12 Check finger dock connectors - if loose, re tighten / if cracked replaced Check anchoring system - if any part is loose , re tighten / if broken 13 replaced 14 Check chain plates/shackles/if loose, re tighten 15 If Chain stress is un even, adjust length 16 Check file guide if rubbing occurs, adjust position and/or clean 17 check h beam - if rubbing occurs, adjust position and/or clean 18 Check push rod - verify hardware for loose/broken components Check slings - adjust tension & verify hardware for loose / broken 19 components 20 Wash Decking with high pressure cleansing device. Frequency Weekly Monthly Quarterly Bi-Anually Annually