Professional Documents
Culture Documents
ANNEXURE-1
25 mm dia MS purlin
4x 6.00 m = 24.00 m
Net wt. 2.21kg/m =53.04 kg=0.53 qntl Qntl 0.53
PWD (B) Providing corrugated galvanised iron sheet roofing of TATA SHAKTI
/ SAIL including fitting and fixing necessary galvanised J & I hooks
bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick
and 1.6 mm thick limtet washer complete excluding cost of roof truss,
purlin etc.(roof trusses and purlin etc. to be measured and paid
seperately)
c) 60 mm thick
2 x 6.00 m x 2.10m =25.20 Sqm Sqm 25.2
PWD (B) Providing galvanised iron ridiging of TATA SHAKATI/ SAIL
including supplying and fixing necessary galvanised screws/washers
etc. complete as directed.
b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/
Nerolac). sq.m. 109.5
29 Providing devits on the deck of barge with fitting and fixing complete
including its base frame complete as directed
No 2
31 Providing M.S bollard with base frame fitting and fixing on the deck of
barge (B) single bollard of medium size
No 4
13 Mooring materials anchoring devices etc. L.S 1
ANNEXURE-2
Name of Work= Detail estimate for supplying , fitting,fixing 80 mm Dia Raw water
pumping main of PUB DATTA KUCHI WSS
Rate-As per APHE schedule of rates for the year of 2015-16
Sch Particulars
Unit Qnty
no
9.1.1
Earth work in excavation in foundation trenches including refilling the
quantity as necessary after completion of works of pipe line dressing,
ramming, watering etc. and removal of surplus earth with 50 m lead and
lift up to 1.5 m all complete including dewatering as directed including
bailing out water where necessary.
80 mm dia RM 700.00
9.6.4
Labour charge for carrying providing and fixing full way wheel valve of
approved quality with supplying jointing materials all complete as
directed.
80 mm dia Each 1
Cost of Materials
5.1 80 mm dia G.I pipe RM 700.00
6.2.1 80 mm dia G.I socket Each 117
6.2.2 80mm dia G.I union socket Each 3
6.2.4 80 mm dia G.I Bend Each 15
6.2.3 80 mm dia G.I Threaded Flange Each 2
6.2.5 80 mm dia G.I Elbow Each 25
6.2.6
80 mm x 65 mm G.I Reducing socket Each 2
6.2.21 80 mm dia (225 mm long) G.I Nipple Each 2
6.3.15 80 mm dia sluice valve Each 1
2.3 Nuts & Bolts 80 mm dia Each 25
3 mm rubber insertion sheet
2.2 80 mm dia Each 8
ANNEXURE-3
Name of work- Supply and installation of 3.0 HP Centrifugal Raw water pump set with
necessary fittings.
Rate = Estimate prepared as per APWD(Elect) SOR 2013-14 & APHE SOR 20015-16
Sl No Item Unit Quantity
39.4.2
(Elect)
3 HP three phase vertical multistage high pressure centrifugal pump set 8
stage (crompton Greaves/ Aquatic/ CRI/ V-Guard/ Calma make) with DOL
starter (crompton greves & contro switch gear /BCH/ L&T/ Simens make )
fully automatic citation.
a) 50 mm dia RM 30
9.11.1
Labour charge for cutting and threading G.I. pipes with requird size of
thread including finishing the end all complete as directed.
Qnty=3.14 x 50 x 3 =471.00 mm mm of
dia 471.00
Cost of Materials
5.1
50 mm dia G.I pipe Rm 30.00
6.2.1
50 mm dia G.I socket Each 6
6.2.2
65 mm dia G.I union socket Each 3
6.2.4
50 mm dia G.I Bend Each 4
6.2.3
50 mm dia G.I Flange Each 2
6.2.5
100 mm dia G.I Elbow Each 7
Detailed Estimate for Construction of 4 Sq.M Size Treatment Plant of PUB DATTA
KUCHI pipe water supply scheme
Estimate prepared on the basis of APWD(B) Schedule of rates for the year of 2013-14
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume Cum
(using mixture machine) 3.03
4.1.1 Providing brick soling in foundation and under floor with stone/ best
quality picked jhama brick, sand packed and laid to level and in panel
after preparing the subgrade as directed including all labour and
materials and if necessary dewatering, complete.
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete
works etc.
(i) Using 38mm thick plank sq.m. 11.14
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc.
having plane vertical face
(i) Using 38mm thick plank sq.m. 1.46
3.1.14 Sides and soffits of beams, beam haunchings, cantilever girder,
bressumers, lintels and horizontal ties.
(i) Walls (thickness not less than 100mm) including attached pillasters,
buttresses, plinth and string course etc.
13.9.1 Finishing old / new wall with water proofing weather coat smooth anti-
fungal exterior painting of approved make of Berger paint of required
shade after cleaning and clearing the surface etc. including scaffolding
complete as directed at all levels (two coats)
sq.m. 57.67
3.1.1(san)13- Supplying fitting fixing G.I pipes of following sizes, with all necessary
14 "R" brand or similar approved G.I fittings such as bend, tee,
elbow,reducer, nipple, plug, long screw fitting, H.W clamp etc.complete
at all levels including below G.L as directed and specified.
ANNEXURE-4B
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 4.80
3.1.1 Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
removal of the same for in-situ reinforced concrete and plain concrete work
in:
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete
works etc.
(i) Using 38mm thick plank sq.m. 9.32
3.1.1.8 Vertical surface such as walls (any thickness), parapet walls, partitions, walls
of septic tank, inspection pit and the like including attached pilasters,
butresses, plinth and string courses and the like.
(i) Walls (thickness not less than 100mm) including attached pillasters,
buttresses, plinth and string course etc.
6.2.3 20 mm thick Cement plaster in two coats, on single or half brick walls for
interior plastering up to 1st floor level including arises, internal rounded
angles,chamfers and / or rounded angles not exceeding 80mm in girth and
finished even and smooth including curing complete as directed.
Earth/ sand filling in plinth in layers not more than 150mm thick including
necessary carriage, watering, ramming etc. complete as directed and specified
1.3
including payment of land compensation, forest royalty, sales tax and other
duties and taxes as may be necessary.
( c) With river sand or silt (predominently non plastic) by truck carriage including
loading to the site of work cu.m. 53.00
Each 2
9.6.1
Labour charge for carrying, placing in position, fitting and fixing C.I.
sluice valve (with wheel & cap) C.I. reflex valve complete with
supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail
pieces if required will be paid separately) all complete as directed (one
valve and two flanged joints).
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch.No Item of work Unit Qnty
1.1 Earth work in excavation for foundation, trenches of walls,retaining walls,
footing of columns,steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return
filling, dressing, watering and ramming etc and removal of removal of surplus
earth with all lead and lifts as directed and specified in the following
classification of soils including bailing out water where necessary as directed
and specified.
Foundation ,footing, base of column, tie beam pile cap raft, walls of septic
tank, inspection pit and the like up to plinth level.
A) On rough side
(b). In cement mortar 1:4 sq.m. 24.65
13.9.1 Finishing old / new wall with water proofing weather coat smooth anti-fungal
exterior painting of approved make of Berger paint of required shade after
cleaning and clearing the surface etc. including scaffolding complete as
directed at all levels (two coats) sq.m. 17.83
Analysis Supplying,and fitting fixing embeded in the RCC shaft column of 200 mm dia
D.I pipe in cascade type aerator, including necessary fittings such as bend,Tee
etc where necessary as directed by the deptt.
Job 1
ANNEXURE-4D
Providing and laying 100 mm dia D.I pipe ambeded in side shaft column of cascade
type aerator.
Sl no Particulars Unit Qnty
cost of materials
5.6 D.I. Pipe (Class K-7)
100 mm dia Rm 6.2
6.4.9 DI DOUBLE SOCKET DUCK FOOT BEND
(a) Up to 300 mm
100 mm dia Qnty= 1 No
Wt. 42 Ks Each Per Kg 42
6.4.15 DI MECHANICAL JOINT COLLER
(a) Up to 300 mm
100 mm dia= 3 nos X 32Kg/E= 96Kg Per Kg 96
6.4.4 Ductile Iron Flange as per IS : 9523/2000
(a) 100 mm -200 mm
100 mm dia= 4 nos X 11Kg each= 44.00Kg Per Kg 44
RUBBER GASKET FOR DI PIPE CONFORMING TO
6.4.18
BIS :5832/85
100 mm dia Qnty= 4 Nos Each 4
ANNEXURE-4E
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch.No Item of work
Unit Qnty
1.1 Earth work in excavation for foundation, trenches of walls,retaining walls,
footing of columns,steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return filling,
dressing, watering and ramming etc and removal of removal of surplus earth
with all lead and lifts as directed and specified in the following classification of
soils including bailing out water where necessary as directed and specified.
Foundation ,footing, base of column, tie beam pile cap raft, walls of septic tank,
inspection pit and the like up to plinth level.
A) On rough side
(b). In cement mortar 1:4 sq.m. 53.88
13.9.1 Finishing old / new wall with water proofing weather coat smooth anti-fungal
exterior painting of approved make of Berger paint of required shade after
cleaning and clearing the surface etc. including scaffolding complete as
directed at all levels (two coats)
sq.m. 42.89
Analysis
Each 1
9.6.1
Labour charge for carrying, placing in position, fitting and fixing C.I.
sluice valve (with wheel & cap) C.I. reflex valve complete with
supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail
pieces if required will be paid separately) all complete as directed (one
valve and two flanged joints).
ANNEXURE-4F
Name of work- Construction of RCC Channel of PUB DATTA KUCHI Water supply
Scheme
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch.No Particulars Unit Quantity
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return filling,
dressing, watering and ramming etc. and removal of surplus earth with all lead
and lifts as directed and specified in the following classification of soils
including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 0.58
3.1.1 Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
removal of the same for in-situ reinforced concrete and plain concrete work in:
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works
etc.
(i) Using 38mm thick plank sq.m. 8.64
3.1.1.3 Columns, Pillars, Posts & Strut
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having
plane vertical face
(i) Using 38mm thick plank sq.m. 26.40
3.1.1.8 Vertical surface such as walls (any thickness), parapet walls, partitions, walls of
septic tank, inspection pit and the like including attached pilasters, butresses,
plinth and string courses and the like.
(i) Walls (thickness not less than 100mm) including attached pillasters, buttresses,
plinth and string course etc.
--------------------------
ANNEXURE-5A
As per APHE schedule of rates for the year of 2015-16 and analysis rate
25.12 Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4
(PWD) reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20
gauge black annealed wire with necessary shuttering , curing etc. complete
including fixing in position as directed.
a) Size from 2 mm to 6 mm
2 x 1.65 x 1.25 x 0.10 =0.60 cum
Cum 0.4125
b) Size from 7 mm to 12 mm
2 x 1.65 x 1.25 x 0.10 =0.60 cum
Cum 0.4125
c) Size from 13 mm to 25 mm
2 x 1.65 x 1.25 x 0.10 =0.60 cum
Cum 0.4125
c) Size from 25 mm to 32 mm
2 x 1.65 x 1.25 x 0.10 =0.60 cum
Cum 0.4125
d) Size from 25 mm to 32 mm
2 x 1.65 x 1.25 x 0.10 =0.60 cum
Cum 0.4125
Cost of Materials
150 mm dia G.I pipe
RM 18
100 mm dia G.I pipe
RM 22
75 mm dia PVC pipe
RM 20
150 mm dia CIDE S/valve
Each 4
100 mm dia CIDE S/valve
Each 3
80 mm dia CIDE S/valve
Each 1
150 mm dia G.I Socket
Each 2
100 mm dia G.I Socket
Each 10
150 mm dia G.I nipple, 225 mm long
Each 6
100 mm dia G.I nipple, 225 mm long
Each 6
150 mm dia G.I Bend 90
Each 6
100 mm dia G.I Bend 90
Each 8
150 mm dia G.I Flange
Each 4
100 mm dia G.I Flange
Each 5
80 mm dia G.I Flange
Each 4
150 x 100 mm dia G.I reduceing socket
Each 1
75 mm dia PVC E/cap
Each 3
Nuts & Bolts 150 mm dia
Each 65
Nuts & Bolts 100 mm dia
Each 40
Nuts & Bolts 80 mm dia
Each 11
3 mm rubber insertion sheet
150 mm dia
Each 15
100 mm dia
Each 9
80 mm dia
Each 6
ANNEXURE-5B
Brick masonary valve chamber inside clear area 900 mm x 900 mm x 1250 mm
including precast slab over the chamber.
Qnty=
1 x 2 x 1.40 x 0.25 x 1.15 =0.81 Cum
1 x 2 x 0.90 x 0.25 x 1.15 =0.52 Cum
1 x 2 x 1.40 x 0.112 x 0.10 =0.03 Cum
1 x 2 x 0.90 x 0.112 x 0.10 =0.02 Cum
Total=1.38 Cum
(c). In proportion 1:5. cu.m
1.38
.
6.2.2 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering
up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and
finished even and smooth including curing complete as directed.
A) On rough side
Qnty= For inside plastering
1 x 4 x 0.90 x 1.25 = 4.50 Sqm
(b). In cement mortar 1:4 sq.m
. 4.5
B) On fair side
Qnty For outside plastering
1 x 4 x 1.40 x 0.15 = 0.84 Sqm
(b). In cement mortar 1:4 sq.m
. 0.84
25.1 Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced
2 with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black
annealed wire with necessary shuttering , curing etc. complete including fixing in
position as directed.
---------------------------
ANNEXURE-6
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch.No Particulars Uni Quanti
t ty
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling)
the quantity as necessary after completion of work, breaking clods in return
filling, dressing, watering and ramming etc. and removal of surplus earth with
all lead and lifts as directed and specified in the following classification of
soils including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using Cu
mixture machine) 3.46
m
3.1.1 Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
removal of the same for in-situ reinforced concrete and plain concrete work
in:
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete
works etc.
(i) Using 38mm thick plank sq.
2.88
m.
3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level.
P) Using admixture, plasticiser etc for air entraining, water reducing purposes
including addition of agent for changing normal setting time of concrete as
required.
P) Using admixture, plasticiser etc for air entraining, water reducing purposes
including addition of agent for changing normal setting time of concrete as
required.
(i) Walls (thickness not less than 100mm) including attached pillasters,
buttresses, plinth and string course etc.
P) Using admixture, plasticiser etc for air entraining, water reducing purposes
including addition of agent for changing normal setting time of concrete as
required.
6.2.3 20 mm thick Cement plaster in two coats, on single or half brick walls for
interior plastering up to 1st floor level including arises, internal rounded
angles,chamfers and / or rounded angles not exceeding 80mm in girth and
finished even and smooth including curing complete as directed.
10.2 Providing, fitting and fixing M.S. grill of requiredpattern for windows/
clerestory windows/ openingwith M.S. flats at required spacing in frame all
round, squre or round M.S. bars with round headed bolts and nuts or
screws.
Name of Work: Detail estimate for Chlorination of PUB DATTA KUCHI PWSS.
Sch Particulars
Unit Qnty
no
1 Specification of Item
Supply and installation of solenoid feed dozing pump of 6 lit capacity
having pressure 6 kg/Sq. Cm of approved brand and make along with
synchronized solution tank mixing container of 100 lits capacity
complete with all electrical wiring with panel board fitting fixing at site ,
commissioning and testing to be done at cost and risk of contractor
pump should have single phase electrical / diesel power supply
provision only.
Name of work- Construction of Clear water Pump House over Under Ground Sump
at PUB DATTA KUCHI P.W.S.S
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch
No Description of Item Unit Quantity
18.1.1 Supplying, fitting and fixing in position reinforcement bars conforming to
relevant I.S. Code for R.C.C. work/ R.B. walling including straightening,
cleaning, cutting and bending to proper shapes and length as per details,
supplying and binding with 20G annealed black wire and placing in position
with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor
level).
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having
plane vertical face
(ii) Using 25mm thick plank sq.m. 8.68
3.1.1. Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever
5 slabs, chajjas, balconies and the like.
8.1.35 Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels
including fitting and fixing self drilling, self tapping screws complete (Roof
trusses, purlins etc. to be measured and paid separately.) .TATA Blue
scope/Dyna roof / Wonder Roof or equivalent as directed by the Deptt.
4.1.8 1st class brick nogged wall in cement mortar including racking out joints and
curing complete as directed in super structure above plinth up to 1st floor
level (protruding M.S rod/Tor steel of column to be embeded in cement
mortar and will be measured and paid separately)
5.1.6 40 mm thick red oxide floor with under layer of 30 mm thick cement concrete
in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of size 20 mm and
down) and top layer of 10mm thick plaster of cement red-oxide of iron per 50
kg of cement in prop. 1:3 (1 cement red oxide: 3 coarse sand) finished with a
floating coat of neat cement red oxide mix of same proportion. sq.m. 9.00
9.1.2 Providing wood work in frame (chowk aths) of doors, windows, clerestory
windows and other similar works wrought, framed and fixed in position in
contact with C.C or brick masonry wall including supplying, fitting and fixing
with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement
concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the
timber faces in contact with C.C and masonry as directed and specified.
cu.m
0.11
(b). With 1st class timber (Hollock/ Sundi) .
6.2.1 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls
for interior plastering up to 1st floor level including arises or rounded angles
not exceeding 80mm girth and finished even and smooth including curing
complete as directed.
I . Plain grill
(a). Fixed to wooden frames kg 36.00
9.9.5 Providing fitting and fixing 1st class local wood battened and framed door
and window shutters including oxidised iron butt hinges (100mmx 58mmx
1.90mm) 6 nos with necessay screws.
(b). With ready mixed paint , wood primer (white). sq.m. 26.29
13.6.5 Painting two coats (excluding priming coat) on new wood and wood based
surface with enamel paint of approved brand and manufacture (Asian paint/
Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including
cleaning the surfaces of all dirt, dust and other foreign matter sand papering
and stopping.
Applying primary coat over new steel and other metal surface over 100m in
13.7.2 width or girth after preparing the surface by throughly cleaning oil,grease, dirt
and other foreign matter and scoured with wire brushes, fine steels, wood
scrapers and sand paper.
a). With ready mixed "red-lead/ red oxide" primer. sq.m. 4.80
13.7.4 Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint of approved brand and manufacture(Asian paint/
Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including
cleaning the surface of all dirt, dust and other foreign matter.
13.9.1 Finishing old / new wall with water proofing weather coat smooth anti-fungal
exterior painting of approved make of Berger paint of required shade after
cleaning and clearing the surface etc. including scaffolding complete as
directed at all levels (two coats) sq.m. 72.82
Name of work- Supply and installation of 3.00 HP Centrifugal Clear water pump
set with necessary fittings.
a) 80 mm dia RM 20
9.11.1
Labour charge for cutting and threading G.I. pipes with requird size of
thread including finishing the end all complete as directed.
Qnty=3.14 x 80 x 3 =753.60 mm
mm of dia 753.60
Cost of Materials
5.1
50 mm dia G.I pipe Rm 20.00
6.2.1 50 mm dia G.I socket
6
Each
6.2.2
65 mm dia G.I union socket Each 3
6.2.4 50 mm dia G.I Bend
4
Each
6.2.3 50 mm dia G.I Flange
2
Each
6.2.5
100 mm dia G.I Elbow Each 7
50 mm dia G/M Full wayvalve
2
Each
2.3
Nuts & Bolts 65 mm dia Each 25
Name of Work= Detail estimate for supplying , fitting,fixing 65 mm dia Clear water
pumping main of PUB DATTA KUCHI PWSS
65 mm dia
RM 45.00
9.6.4
Labour charge for carrying providing and fixing full way wheel valve of
approved quality with supplying jointing materials all complete as directed.
65 mm dia
Each 1
Cost of Materials
5.1 65 mm dia G.I pipe RM 45.00
6.2.1 65 mm dia G.I socket Each 22
6.2.2 65mm dia G.I union socket Each 3
6.2.4 65 mm dia G.I Bend Each 4
6.2.3 65 mm dia G.I Threaded Flange Each 2
6.2.5 65 mm dia G.I Elbow Each 4
6.2.6
80 mm x 65 mm G.I Reducing socket Each 2
6.2.21 65 mm dia (225 mm long) G.I Nipple Each 2
63 mm dia full way valve Each 1
2.3 Nuts & Bolts 65 mm dia Each 60
2.2 3 mm rubber insertion sheet
65 mm dia Each 35
ANNEXURE-11
Construction of 100 Cu.M Capacity OHR for PUB DATTAKUCHI PWSS with 16 m
Staging
APWD Quatti
Item description Unit
Item No ty
2 3 4 6.00
EARTHWORK IN EXCAVATION
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return filling,
dressing, watering and ramming etc. and removal of surplus earth with all lead
and lifts as directed and specified in the following classification of soils
including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using Cu
9.25
mixture machine) m
2.2.1 Providing and laying plain/reinforced cement croncrete works cement with
coarse sand & 20mm down graded stone aggregate including dewatering if
necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and
reinforcement will be measured and paid separately)
(i) Walls (thickness not less than 100mm) including attached pillasters, buttresses,
plinth and string course etc.
Ist lift 6.60m + 2nd lift 9.90m + 3rd lift 12.90m= (314.43x3) = 943.29 = Cu
(6855.86+943.29) 14.55
m
(ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and
support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase
(except spiral staircase and landing ) including preparing the top surface and
finishing of nosing.
Cu
(iii) 1 : 1 : 2 (1cement : 1coarse sand : 2aggregate) or M-25 grade. 130.43
m
3.1.1 Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
removal of the same for in-situ reinforced concrete and plain concrete work in:
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works
etc.
(i) Using 38mm thick plank sq.
m. 89.88
3.1.1.3 Columns, Pillars, Posts & Strut
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having
plane vertical face
(i) Using 38mm thick plank
sq.
Column up to height 3.20m m. 93.48
sq.
51.20
Column height from 3.20m to 6.40m m.
3.1.4 Extra for each subsequent floor or part thereof above the First Floor level as
mentioned in item no. 3.1.1 & 3.1.3(b). sq.
51.20
m.
sq.
51.20
Column height from 6.40m to 9.60m m.
3.1.4 Extra for each subsequent floor or part thereof above the First Floor level as
mentioned in item no. 3.1.1 & 3.1.3(b).
Quantity from 2nd breasing beam to 3 rd Bresing beam =( 23.19 X3)=69.57 sq.
109.33
m.
3.1.1.8 Vertical surface such as walls (any thickness), parapet walls, partitions, walls
of septic tank, inspection pit and the like including attached pilasters, butresses,
plinth and string courses and the like.
Quantity from 2nd breasing beam to 3 rd Bresing beam =( 23.19 X3)=69.57 sq.
166.32
m.
6.2.3 20 mm thick Cement plaster in two coats, on single or half brick walls for
interior plastering up to 1st floor level including arises, internal rounded
angles,chamfers and / or rounded angles not exceeding 80mm in girth and
finished even and smooth including curing complete as directed.
d) Extra over item no. (b) and (c) above for every subsequent coat of water
proofing cement paint of approved brand and manufactured. sq.
472.97
m.
19.2 Providing plinth protection with bricks flat laid in cement mortar 1: 4 and
finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of sq.
neat cement finish. 83.93
m.
10.2
Providing, fitting and fixing M.S. grill of requiredpattern for windows/
clerestory windows/ openingwith M.S. flats at required spacing in frame all
round, squre or round M.S. bars with round headed bolts and nuts or
screws.
II Ornamental grill
(c). Fixed to Brickwork/P.C.C/R.C.C. Kg 170.09
18.6 ANGLES/ FLATS/ BOLTS AND NUTS
18.6.1 Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts
including painting with red lead paint one coat complete as directed.
Eac
100mm dia
h 1.00
6.3.12 C.I. Double Air Release Valve as per IS : 14845/2000
Eac
100mm dia
h 1.00
Eac
150mm dia
h 1.00
9.6.1
Labour charge for carrying, placing in position, fitting and fixing C.I.
sluice valve (with wheel & cap) C.I. reflex valve complete with
supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail
pieces if required will be paid separately) all complete as directed (one
valve and two flanged joints).
Eac
100 mm dia
h 2.00
Eac
150 mm dia
h 1.00
Analysis Construction of brick masonary valve chamber with 23 cm 1 st class brick in
prop. 1:4 finished with 10 mm thick cement plastering prop. 1 :4 inside wall in
floor including necessary earth work in excavation and refilling the sides of the
same after completion of brick work. The size of chamber 60cm x 60cm x 120
cm inside with a RCC cover slab in 10 tor T.S @150 mm c/c both ways
binding with black wire. Brick flat soling with 1:3:6 in the base of chamber
complete as per specification and drawing approved by the Deptt.
Eac
h 3.00
Analysis Providing bamboo scaffolding wirth Jati and Bhaluka Bamboo adequately
strengthened to withstand the weight of the structure and live load at different
stages of work including cost of ropes, planks, nails etc all complete.
3649.2
Job 1
PHE Supply, erection, jointing, testing & commi- ssioning of different dia. G.I. pipe
e.s in inlet, Delivery, Overflow and Wash Pipes for the ESR with all nuts,
bolts, gaskets and painting etc. all complete as directed and specified.
Materials
6.2.5 150 mm dia G.I Elbow Eac
6.00
h
100 mm dia G.I Elbow Eac
2.00
h
6.2.4 150 mm dia GI Bend Eac
4.00
h
100 mm dia G.I Bend Eac
2.00
h
6.2.1 150 mm dia G.I Socket Eac
8.00
h
100 mm dia G.I Socket Eac
4.00
h
6.2.3 150 mm dia G.I Flange Eac
8.00
h
100 mm dia G.I Flange Eac
4.00
h
19.5 Providing drain with brick work in cement mortar in proportion 1:5 with half
brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat
soling including 15mm thick cement plastering in prop. 1:3 finished with a
floating coat of cement slurry as directed with necessary shttering for sides and
earth work in excavation of foundation trenches and refilling the sides after
completion of work etc. as specified.
ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial 42.269
depth of 100mm. r.m.
8
1.46(sa Providing fitting and fixing 450 mm dia . 90 mm thick C.I Man hole cover and
ni) frame of 58 kg. weight complete as directed and specified. Eac
1.00
h
Providing, supplying and placing of GI water stopper in RCC wall, base slab,
cover slab,
CPHE Approved central shaft etc. of water retaining
structureto be made out of G.I. plain sheet
not thinner than 22 SWg and of size 300 mm
wide, all complete as directed and RM 100.80
specified. (for the Cascade type Aerator, it
is to be provided at the junction of the deck
slab and the gutter wall.)
Supplying, fitting and fixing of 80 mm. dia.G.I. (M) air vent pipe in under
ground sump,of length 450 mm. and with flanges at bothends, one being
CPHE Approved
embedded in concrete and theother fixed with mosquito proof wire mesh (the
wire mesh being facing the floor of the sump) with necessary nuts & bolts etc.,
all complete as directed and specified. Eac
1.00
h
CPHE Approved CPHE Approved
Float operated water level indicator for the reservor having the range of 0-50
m3 with least count of 5 m3 complete with float , scale , pully , nylon chord,
M.S frame etc. and including calibration of the scale, all complete as directed.
Eac
h 1.00
-------------------------------
ANNEXURE-12A
75 mm dia ,, 4680.00
90 mm dia ,, 745.00
110mm dia ,, 1565.00
9.2.4
Labour charge for carrying laying and fixing G.I. pipes complete
with G.I. fittings specials with jointing materials and supplying the
jointing materials all complete as directed excluding trenching and
refilling of earth (external work).
Each 11
9.6.1
Labour charge for carrying, placing in position, fitting and fixing C.I.
sluice valve (with wheel & cap) C.I. reflex valve complete with
supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the
tail pieces if required will be paid separately) all complete as directed
(one valve and two flanged joints).
80 mm dia Each 6
100 mm dia Each 3
9.6.6
Labour charge for carrying, fitting and fixing C.I. double air valve
complete with supplying bolts, nuts 3 mm thick rubber insertion etc.
all complete as directed.
a) 80 mm dia Each 2
9.13.1
Each 4
9.13.2
Brick masonary valve chamber inside clear area 900 mm x 900 mm x 1250 mm
including precast slab over the chamber
Sch Particulars Qnt
Unit
no y
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls, footings of
column, steps, septic tank etc. including refilling (return filling) the quantity as
necessary after completion of work, breaking clods in return filling, dressing,
watering and ramming etc. and removal of surplus earth with all lead and lifts as
directed and specified in the following classification of soils including bailing out
water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
Qnty=
1 x 2 x 1.40 x 0.25 x 1.15 =0.81 Cum
1 x 2 x 0.90 x 0.25 x 1.15 =0.52 Cum
1 x 2 x 1.40 x 0.112 x 0.10 =0.03 Cum
1 x 2 x 0.90 x 0.112 x 0.10 =0.02 Cum
Total=1.38 Cum
(c). In proportion 1:5. cu.m
1.38
.
6.2.2 15 mm thick Cement plaster in single coat on single or half brick wall for interior
plastering up to 1st floor level including arises, internal rounded angles, not
exceeding 80mm girth and finished even and smooth including curing complete as
directed.
A) On rough side
Qnty= For inside plastering
1 x 4 x 0.90 x 1.25 = 4.50 Sqm
(b). In cement mortar 1:4 sq.m
. 4.50
B) On fair side
Qnty For outside plastering
1 x 4 x 1.40 x 0.15 = 0.84 Sqm
(b). In cement mortar 1:4 sq.m
. 0.84
25.1 Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced
2 with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black
annealed wire with necessary shuttering , curing etc. complete including fixing in
position as directed.
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch
no Description of Item Unit Quantity
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return
filling, dressing, watering and ramming etc. and removal of surplus earth with
all lead and lifts as directed and specified in the following classification of
soils including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 0.61
4.1.1 Providing brick soling in foundation and under floor with stone/ best quality
picked jhama brick, sand packed and laid to level and in panel after preparing
the subgrade as directed including all labour and materials and if necessary
dewatering, complete.
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works
etc.
(i) Using 38mm thick plank sq.m. 29.00
2.2.1 Providing and laying plain/reinforced cement croncrete works cement with
coarse sand & 20mm down graded stone aggregate including dewatering if
necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and
reinforcement will be measured and paid separately)
Name of work- Construction of Raw water Pump House cum Duty room PUB
DATTA KUCHIP.W.S.S
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch
No Description of Item Unit Quantity
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return
filling, dressing, watering and ramming etc. and removal of surplus earth with
all lead and lifts as directed and specified in the following classification of
soils including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 0.32
4.1.1 Providing brick soling in foundation and under floor with stone/ best quality
picked jhama brick, sand packed and laid to level and in panel after preparing
the subgrade as directed including all labour and materials and if necessary
dewatering, complete.
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works
etc.
(ii) Using 25mm thick plank sq.m. 5.40
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having
plane vertical face
(ii) Using 25mm thick plank sq.m. 10.26
3.1.1.5 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever
slabs, chajjas, balconies and the like.
P) Using admixture, plasticiser etc for air entraining, water reducing purposes
including addition of agent for changing normal setting time of concrete as
required.
5.1.10 Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse
sand) finished with a floating coat of neat cement including rounding of
junctions with floor.
5.1.8 Providing and laying 65mm thick C.C. floor with metallic concrete hardener
topping under layer of 50 mm thick cement concrete 1:2:4 (1cement:2 coarse
sand:4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of
metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2
stone aggregate 6 mm and down) by volume with which metallic hardening
compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement:
1 part of metallic floor hardening compound of approved quality by weight)
including finishing with curing complete as directed. sq.m. 15.60
9.1.2 Providing wood work in frame (chowk aths) of doors, windows, clerestory
windows and other similar works wrought, framed and fixed in position in
contact with C.C or brick masonry wall including supplying, fitting and fixing
with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement
concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the
timber faces in contact with C.C and masonry as directed and specified.
I . Plain grill
(a). Fixed to wooden frames kg 36.00
9.9.5 Providing fitting and fixing 1st class local wood battened and framed door
and window shutters including oxidised iron butt hinges (100mmx 58mmx
1.90mm) 6 nos with necessay screws.
(b). With ready mixed paint , wood primer (white). sq.m. 26.29
13.6.5 Painting two coats (excluding priming coat) on new wood and wood based
surface with enamel paint of approved brand and manufacture (Asian paint/
Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including
cleaning the surfaces of all dirt, dust and other foreign matter sand papering
and stopping.
13.7.2 Applying primary coat over new steel and other metal surface over 100m in
width or girth after preparing the surface by throughly cleaning oil,grease, dirt
and other foreign matter and scoured with wire brushes, fine steels, wood
scrapers and sand paper.
a). With ready mixed "red-lead/ red oxide" primer. sq.m. 4.80
13.7.4 Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint of approved brand and manufacture(Asian paint/
Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including
cleaning the surface of all dirt, dust and other foreign matter.
As per A.P. W.D (build) schedule of rates for the year 2013-14
Sch no Item of work Unit Quantity
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling)
the quantity as necessary after completion of work, breaking clods in return
filling, dressing, watering and ramming etc. and removal of surplus earth with
all lead and lifts as directed and specified in the following classification of
soils including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 1.88
4.1.1 Providing brick soling in foundation and under floor with stone/ best quality
picked jhama brick, sand packed and laid to level and in panel after preparing
the subgrade as directed including all labour and materials and if necessary
dewatering, complete.
3.1.1 Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
removal of the same for in-situ reinforced concrete and plain concrete work
in:
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete
works etc.
(ii) Using 25mm thick plank sq.m. 32.28
3.1.1.3 Columns, Pillars, Posts & Strut
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having
plane vertical face
(ii) Using 25mm thick plank sq.m. 25.62
3.1.1.5 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever
slabs, chajjas, balconies and the like.
4.1.10 75 mm thick reinforced brick wall in prop 1:5 reinforced with one line of M.S
rod/ Tor steel as specified embeded in 28 mm thick concrete course in
prop.1:2:4 with coarse agg. 12mm down at every third course embedded with
protruding rod in column complete as directed (M.S rod / Tor steel shall be
measured and paid separately) in super structure up to 1st floor level.
sq.m. 3.12
6.2.1 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls
for interior plastering up to 1st floor level including arises or rounded angles
not exceeding 80mm girth and finished even and smooth including curing
complete as directed.
A) On rough side
(b). In cement mortar 1:4 sq.m. 133.53
5.1.4 65 mm thick cement concrete floor consisting of 50 mm under layer of cement
concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm
and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2
(1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in
panels and finished with a floating coat of neat cement finish (using cement
slurry for bond @ 2.75 kg. per square metre of floor area) including curing
sq.m. 29.25
etc. complete as directed.
5.1.10 Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse
sand) finished with a floating coat of neat cement including rounding of
junctions with floor.
9.9.1 Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for
doors/windows including oxidised iron butt hinges (100mm x75 mm x3.55
mm) with necessay screws (other things to be measured and paid separately
including glass panes)
(2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2.
8.1.35 Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels
including fitting and fixing self drilling, self tapping screws complete (Roof
trusses, purlins etc. to be measured and paid separately.) .TATA Blue
scope/Dyna roof / Wonder Roof or equivalent as directed by the Deptt.
( c) With river sand or silt (predominently non plastic) by truck carriage including
loading to the site of work cu.m. 29.70
13.2.2 f) Distempering with dry distemper of approved brand and manufacture(two
coats)and of required shade on new wall surface to give an even shade, over
and including priming coat of white primer after throughly brushing the
surface free from mortar dropings and other foreign matter and including
preparing surface even and sand papered smooth. sq.m. 163.06
13.6.3 Applying priming coat over new wood and wood based surfaces over 100mm
in girth/width after and including preparing the surface by throughly cleaning
oil, grease, dirt snd other foreign matter , sand papering and knotting.
(a). With ready mixed paint , Wood primer (pink) sq.m. 65.90
13.6.5 Painting two coats (excluding priming coat) on new wood and wood based
surface with enamel paint of approved brand and manufacture (Asian paint/
Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including
cleaning the surfaces of all dirt, dust and other foreign matter sand papering
and stopping.
a). With ready mixed "red-lead/ red oxide" primer. sq.m. 17.50
13.7.4 Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint of approved brand and manufacture(Asian paint/
Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including
cleaning the surface of all dirt, dust and other foreign matter.
CONSTRUCTION OF ASEB's 25 KVA S/S WITH 11 KVA LINE FOR PROVIDING SERVICE
CONNECTION AT (INTAKE POINT) OF PUB DATTA KUCHI PWSS
CONSTRUCTION OF ASEB's 25 KVA S/S WITH 11 KVA LINE FOR PROVIDING SERVICE
CONNECTION AT (T.P SITE) OF PUB DATTA KUCHI PWSS
Name of Work= Construction of compound fencing around the T.P site of PUB
DATTA KUCHIPWSS.
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 0.81
18.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevant
1 I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting
and bending to proper shapes and length as per details, supplying and binding with
20G annealed black wire and placing in position with proper blocks, supports,
chairs, spacers etc. complete (upto 1st floor level).
3.1.1. Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.
1
(ii) Using 38 mm thick plank sq.m
. 17.27
3.1.1. Sides of tie beams, grade beams etc. at or below ground level.
2
(i) Using 38mm thick plank sq.m
. 48.00
(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane
vertical face
(i) Using 38mm thick plank sq.m
. 28.11
2.2.1 Providing and laying plain/reinforced cement croncrete works cement with coarse
sand & 20mm down graded stone aggregate including dewatering if necessary, and
curing complete but excluding cost of form work and reinforcement for reinforced
cement concrete work (form work and reinforcement will be measured and paid
separately)
(ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support,
balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except
spiral staircase and landing ) including preparing the top surface and finishing of
nosing.
6.2.2 15 mm thick Cement plaster in single coat on single or half brick wall for interior
plastering up to 1st floor level including arises, internal rounded angles, not
exceeding 80mm girth and finished even and smooth including curing complete as
directed.
A) On rough side
(b). In cement mortar 1:4 sq.m 58.00
.
B) On fair side
(b). In cement mortar 1:4 sq.m
. 63.88
13.2. a) Colour washing with lime on wall surface (two coats) over and including a
1 priming coat of white washing to give an even shade after throughly brooming the
surface to remove all dirt, dust, mortar drops and other foreign matter. sq.m 123.8
. 8
Applying primary coat over new steel and other metal surface over 100m in width
13.7. or girth after preparing the surface by throughly cleaning oil,grease, dirt and other
2 foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand
paper.
a). With ready mixed "red-lead/ red oxide" primer. sq.m 8.16
.
13.7. Painting two coats (excluding priming coat) on new steel and other metal surface
4 with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/
ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the
surface of all dirt, dust and other foreign matter.
a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not
less than 1800mm only duly slotted and bottom torqued with two numbers as stay
posts..
b) Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less
than 1800mm only duly slotted and bottom torqued and splayed.
c) Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than
1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are
to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be
measured and paid separately).
17.11 Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from
50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia
M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at
200mm apart from bottom flat to middle flat including drilling, welding etc.
complete. All vertical bars are to be protruded at least 100mm above the middle
and top flat is to be flattended and pointed as directed. Necessary locking
arrangement on both faces, arrangement for temporary closing the gate and 2 nos.(
minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be
embeded in C.C brick pillars as necessary including a red oxide painting to all iron
works as directed and specified. (Separate payment will be made for posts).
Qtl 2.70
ANNEXURE-19A
Per Mtr. 15
12.1.1 Providing and fixing I.C.T.P. ans N. link main switch with rewire able
fuses of 500 Volt grade (HPL/ GECO/ ANCHOR or equivalent make)
including drilling boards/iron frames and fixing with bolts and nuts
and connections as approved by the deptt. etc. complete.
3.7 Wiring for drawing sub-main line with PVC insulated single core
unsheathed industrial (multistrand) cable FR conforming to IS -694 :
1990 with flexible bright annealed electrolytic copper conductor for
voltage grade up to 1100 volts (Finolex / RR Kabel or equivalent
make as approved by the Deptt) in ISI marked steel conduit pipe
including earth continuity in surface / recessed conduit wiring
system.
Per Mtr. 15
22.8 Supply, installation and testing of G.I earth station with perforated 50
mm dia and 3.00 m long heavy duty G.I pipe with necessary 50 mm
dia G.I fittings such as socket, Tee, Elbow, nipple and 65mm x
50mm G.I reducing socket for funnel including locking arrangement
300 mm x300 mm x6 mm hinged cover C.I earth plate complete with
digging of earth pit , construction of brick chamber and plastering of
both inner & outer surface of wall as specified and directed by the Each 1
deptt.
ANNEXURE-19C
Internal Electrification of Raw Water Pump House cum duty room of PUB DATTA
KUCHIWater Supply Scheme
3.7 Wiring for drawing sub-main line with PVC insulated single core
unsheathed industrial (multistrand) cable FR conforming to IS -694
: 1990 with flexible bright annealed electrolytic copper conductor
for voltage grade up to 1100 volts (Finolex / RR Kabel or
equivalent make as approved by the Deptt) in ISI marked steel
conduit pipe including earth continuity in surface / recessed
conduit wiring system.
Per Mtr. 15
22.8 Supply, installation and testing of G.I earth station with perforated
50 mm dia and 3.00 m long heavy duty G.I pipe with necessary 50
mm dia G.I fittings such as socket, Tee, Elbow, nipple and 65mm x
50mm G.I reducing socket for funnel including locking
arrangement 300 mm x300 mm x6 mm hinged cover C.I earth plate
complete with digging of earth pit , construction of brick chamber
and plastering of both inner & outer surface of wall as specified Each 1
and directed by the deptt.
ANNEXURE-19D
Each 4
32.1
--------------------------------
ANNEXURE-20
Name of work-Construction of Box Culvert and approach road with spreading 150
mm thick sand gravel of PUB DATTA KUCHI PWSS
As per A.P. W.D (roads) schedule of rates for the year 2013-14
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 0.63
3.1.1 Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of
propping and centering below supporting floor to ceiling not exceeding 4.0M
and removal of the same for in-situ reinforced concrete and plain concrete
work in:
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete
works etc.
(i) Using 38mm thick plank sq.m. 1.38
4.1.4 Brick work in cement morter with 1st class brick including racking out joints
and dewatering if necessary, and curing complete as directed
Supplying and spreading sand gravel on the approach road ramming, packing
etc. complete as directed and specified including payment of forest royality
and sale tax and other duties and taxes may be necessary.
Analysis of Sand & Gravel
60% Gravel per Cum quantity
40% Sand per Cum quantity
Rate (As per present market)
ANNEXURE-21
1 Slide wrench(Taparia)
300 mm Each Rs.225.00
200 mm Each Rs.180.00
150 mm Each Rs.175.00
2 Pipe Wrench(Taparia)
450mm Each Rs.1245.00
600 mm Each Rs.1530.00
3 Chain tongue(Taparia)
450mm Each Rs.2600.00
600mm Each Rs.2900.00
Analysis Trial run including training of operation and maintance staff Job 1
1
Checking testing and jointing PVC pipe line for any leakage, pumping set
job 1
and inter connection etc. including cost of materials,solvent etc.
2
Plumber (1 st class) 1 no for 10 days @ Rs300.00/Each/day Each 10
3 Electrician 1 no for 10 days @ Rs300/Each/day Each 10
4
Skilled labour 1 nos for 10 days @Rs300.00 Each/day Each 10
5
Unskilled labour 1 no for 10 days @ Rs208.00Each/Day Each 10
6
Training of operation and maintanance staff about operation of pumping
sets,internal connection,minor repairing of components etc. (Expecditure
including cost of lodging entertainment cost,travelling Each 20
allowances,honourium to resource person @ Rs 500.00/day 2 nos for 10
days
ANNEXURE-23
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass
concrete works etc.
(ii) Using 25mm thick plank
4 x 4 x 0.30m x 0.50m=2.4 sq.m. 2.40
18.3.2 Providing welding, fitting, fixing, hoisting and fixing of roof
trusses with purlin, bottom runner etc. fabricated out of a
combination of two or all of the following sections: (i) square
hollow sections (SHS/RHS) (ii) rectangular hollow section and
(iii) M.S. black-tubes conforming to relevant I.S. code 1161-1968
as per approved design and drawing including M.S. cleat, base
plate, bolts and nuts which ever required, including that required
for fixing the ceiling and one coat of red oxide Zinc Chromate
primer to all steel surface etc. complete as directed as per
specifications.
DAR
painting one coat including priming coat in the plain sheet ,
cleaning the surface of all dirt,dust and other foreign matter and
lettering as per formate prescribed by the deptt. Including hanging
the wall as directed and specified.
As per A.P. W.D (build)(Elect) schedule of rates for the year 2013-14.
Name of work-Installation of 5 KVA Diesel Generator set at T.P site of PUB DATTA
KUCHIPWSS
As per A.P. W.D (build)(Elect) schedule of rates for the year 2013-14.
Name of work-Construction of twin brick lined circular septic pit , drain, junction
chamber and fitting & fixing of pan & trap etc. (low cost latrine) for PUB DATTA
KUCHI PWSS
Sch Quantit
Item of work Unit
no y
1.1 Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return filling,
dressing, watering and ramming etc. and removal of surplus earth with all lead
and lifts as directed and specified in the following classification of soils
including bailing out water where necessary as directed and specified.
(A) Upto a depth of 2.00 m below the existing G.L.
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in
foundation bed for footing steps, walls, brick works etc. as directed and
specified including dewatering if necessary, and curing complete (shuttering
where necessary shall be measured and paid separately).
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
Cum 0.14
mixture machine)
4.1.4 Brick work in cement morter with 1st class brick including racking out joints
and dewatering if necessary, and curing complete as directed
B) On fair side
(b). In cement mortar 1:4 sq.m
. 24.41
1.3 Earth/ sand filling in plinth in layers not more than 150mm thick including
necessary carriage, watering, ramming etc. complete as directed and specified
including payment of land compensation, forest royalty, sales tax and other
duties and taxes as may be necessary.
( c) With river sand or silt (predominently non plastic) by truck carriage including
loading to the site of work cu.
0.65
m.
4.1.1 Providing brick soling in foundation and under floor with stone/ best quality
picked jhama brick, sand packed and laid to level and in panel after preparing
the subgrade as directed including all labour and materials and if necessary
dewatering, complete.
cu.
(b). With Hollock/ Sundi/ Sam m. 0.04
8.1.35 Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including
fitting and fixing self drilling, self tapping screws complete (Roof trusses,
purlins etc. to be measured and paid separately.) .TATA Blue scope/Dyna roof /
Wonder Roof or equivalent as directed by the Deptt.
13.6.3 Applying priming coat over new wood and wood based surfaces over 100mm
in girth/width after and including preparing the surface by throughly cleaning
oil, grease, dirt snd other foreign matter , sand papering and knotting.
ii 100 mm dia RM 2
1.36. Supplying fitting and fixing H.C.I bend with door including bolts and nuts and
3 other fittings as required and complete at all levels including below G.L as
directed and specified.
ANNEXURE-28
Name of work= Provision of safe disposal of waste water of PUB DATTA KUCHI
PWSS
(a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using
mixture machine) Cum 0.86
4.1.1 Providing brick soling in foundation and under floor with stone/ best quality
picked jhama brick, sand packed and laid to level and in panel after preparing
the subgrade as directed including all labour and materials and if necessary
dewatering, complete.
3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete
works etc.
(ii) Using 25mm thick plank sq.m. 1.24
4.1.4 Brick work in cement morter with 1st class brick including racking out joints
and dewatering if necessary, and curing complete as directed
Detail survay of Distribution network . Intake point, Treatment plant site etc. for
PUB DATTA KUCHI PWSS
Analysis for detail survay work of considering for one PWSS as one Job
Sch
item Particulars Unit Qnty
No
A Materials
1. Hire charge of Total station Machine= 1 no per day Per Day 10.00
B
Labour
Name of work= Estimate for Sub Soil investigation at the proposed O.H.R. site for
PUB DATTA KUCHI PWSS
A. Boring.
(iii) Construction of 100mm machine boring (Drilling) through all
types of gravel,sandy gravel excluding transportation charges.
C. Laboratory test.
(i) Particle size analysis (dry sieving). per test 3
(ii) Particle size analysis (wet sieving). per test 3
(iii) Determination of Hydrometer test. per test 3
(iv) Determination of liquid limit test.
(a) 3 points. per test 2
(v) Determination of Plastic Limit test. per test 3
(vi) Determination of Moisture Content test. per test 2
(vii) Determination of bulk density test. per test 3
(viii) Determination of Specific Gravity test of fine grained per test
soil. 2
----------------------------------
Sample Format of Bank Guarantee