Professional Documents
Culture Documents
Model: FV-300
MODELS
Model No. Description
FV1-42SP08 Step Mill; 9" x 42" Table,
R-8Spindle
FV1-42SP30 Step Mill; 9" x 42" Table,
#30Spindle
FV1-42VS08 V.S. Mill; 9" x 42" Table,
R-8Spindle
FV1-42VS30 V.S. Mill; 9" x 42" Table,
#30Spindle
FV1-48SP08 Step Mill; 9" x 48" Table,
R-8Spindle
FV1-48SP30 Step Mill; 9" x 48" Table,
#30Spindle
FV1-48VS08 V.S.Mill; 9" x 48"Table,
R-8Spindle
FV1-48VS30 V.S. Mill; 9" x 48" Table,
#30 Spindle
FV300SP08 Step Mill; 11" x 58" Table,
R-8Spindle
FV300SP30 Step Mill; 11" x 58" Table,
#30 Spindle
FV300VS08 V.S. Mill; 11" x 58" Table,
R-8Spindle
FV300VS30 V.S. Mill; 11" x 58" Table,
Model: FV-1 #30Spindle
Variable Speed or Standard Equipment
Step-Pulley Headstock Base machine is furnished with manuals, inspec-
tion sheet and tool kit. FV-300 mills also include
The CLAUSING/Kondia step pulley models offer filter/lubricator/regulator unit with hose for
(8) speeds ranging from 85 to 3,000 rpm, while pneumatic knee.
variable speed models provide an infinite speed
range from 60 to 4,000 rpm, with simplified dial- SPECIFICATIONS
selected speed settings. PLUS-the CLAUSING/
Kondia features: FV-1 FV-300
• Hardened and ground ways on both saddle TABLE
and table (far superior to chrome-plated soft Standard size 9"x42" 11" X 58"
iron) Optional 9"x48"
• Lever-operated manual rapid quill movement Number ofT -slots 3 3
Width ofT -slots 5/a" 5/s"
• Handwheel for fine quill feed Spacing 29/16° 3"
• Chrome-plated quill and quill lock
• ABEC 7 Spindle Bearings TRAVERSES
• Micrometer depth stop Longitudinal 30" (42"table) 34"
• Reversible switch for clockwise or 36" (48"table)
Cross traverse 15" 15"
counterclockwise operation Vertical traverse 16%" 15"
• Spindle brake Ram Travel 23" 23"
• Overload safety device, integral with motor
• R-8 or !SA #30 Spindle TURRET HEAD
• Adjustable automatic feed disengagement for Power (Variable Speed) 3h.p. 3h.p.
(Step Mill) 2h.p. 2h.p.
quill feed in both directions Spindle Speeds
• Worm gear angular positioning of head in two (Variable Speed) 60-4,000 rpm 60-4,000 rpm
directions (Step Mill) 8 speeds 85-3,000 rpm 85-3,000 rpm
Main spindle taper R8orlSA30 R8orlSA30
TABLE
Dimensions 12" X 42"
Number ofT -slots 3
Width ofT-slots 5/s"
Spacing 29/16 11
TRAVERSES
Longitudinal 24"
Cross Traverse 14"
Knee Travel 16 1/2"
TURRET HEAD
Power 3hp
Spindle Speeds-Variable 60-4,000 rpm
Main Spindle Taper INT30
Quick-change
Spindle Traverse 5"
Extra working height between The addition of the horizontal Model No. Description
spindle nose and table can be milling arbor support and milling
gained by using riser blocks which arbors gives your machine even FV-4010 RightAngle Attachment;
provide 4", 6" or 8" of additional greater versatility. The rotation of 1NT#30
capacity. the FV-4010 or FV-4020 right FV-4020 Right Angle Attachment;
angle attachments through 360 R-8
FV-4150 Horizontal Mill Arbor
Model No. Height degrees allows milling and drilling Support
on very difficult approach areas. FV-4060 Milling Arbor; 7fs'',
FV-4200 4" lNT #30
FV-4210 6"
FV-4070 Milling Arbor; 1",
FV-4220 8"
lNT #30
FV-4080 Milling Arbor; 1 W',
lNT #30
FV-4120 Milling Arbor; 7/s", R-8
FV-4130 Milling Arbor; 1", R-8
FV-4140 Milling Arbor; 1W', R-8
Multiangle Chip Tray Automatic Power
Attachment Feed
Splash guard
mounted over the base/sump of
the machine to help catch chips
and coolant. Model FV-4550
Protection
Bellows Number of feeds . . . . . . . . . . . . 12
Minimum feed ......... 112''/min.
Maximum feed ....... 7 1/2"/min.
Motor . . . . . . . . . . . . . . . . . . . 1/4 h.p.