Professional Documents
Culture Documents
GENERAL
High pressure compressor systems specifications are general. The main components listed are
designed purchased parts that are designed to compliment a Driltech blasthole drill machine. The
primary drilling concept is DTH down the hole drill method and the secondary drill concept is rotary
drill methods.
COMPONENT SPECIFICATION
MAIN OIL FILTER BYPASS VALVE (CFP2) 25 PSI (1.7 BAR) SWITCH - 30 PSI BYPASS OR
35 PSI (2.4 BAR) SWITCH - 40 PSI BYPASS
Y2000 FACTORY FILL COMPRESSOR OIL SHELL CORENA AW32 / CORENA POA 32
Specifications listed are consistent on all Driltech high pressure model machines. Minor changes
have taken place for component longevity and to improve operation for the drilling cycle.
When connecting electrical switches into the compressor system refer to the abbreviated descrip-
tions (COP) (CAT) or (CIT) on the machine specific electrical system schematic.
FEATURE/OPTION SPECIFICATION
HYDRAULIC TANK PRESSURIZATION 5 PSI (.3 BAR) RELIEF @ 12 PSI (.8 BAR)
DRY DUST COLLECTION AIR REGULATION 50 PSI (3.5 BAR) RELIEF @ 90 PSI (6.2 BAR)
Page 6