Professional Documents
Culture Documents
Calculation Data/Results...
Gas Properties...
Compressibility Factor: 1
Compressibility Factor Method: None
Calculation Notes...
Comments:
GASCalc 5.0 Revision: 043 - January 06, 2016 Page No 1, Date: 16/02/2017
Report: Continued...
These calculations are only valid within the applicabile range of the selected flow equation.
The Minimum Velocity value is based on the larger of the inside diameter value of the specified pipe Size/Type and
any attached components, and the Inlet Pressure and AverageTemperature values.
The Maximum Velocity value is based on the smaller of the inside diameter value of the specified pipe Size/Type
and any attached components, and the Outlet Pressure and Average Temperature values.
References:
Flow Equation - Gas Processors Suppliers Association, Engineering Data Book, 1998.
Compressibility - Not Applicable.
Atmospheric Pressure - American Gas Association, GEOP Series, Measurement, Book M-1, 1993.
Notes:
GASCalc 5.0 Revision: 043 - January 06, 2016 Page No 2 (Last), Date: 16/02/2017