You are on page 1of 2

OIL/GAS WETBACK

FIRETUBE BOILER

The wetback construction resulted in a package


boiler design which eliminates heat loss
problems, provides lower maintenance, simplifies
accessibility and makes your plant room cleaner
and cooler. This boiler has been specially
designed for small boiler installation where
simplicity and ease of operation are the primary
requisite.

• Gas (Biogas, Waste Gas, Natural Gas)


Fuel Compatibility • Oil (Biodiesel, High Speed Diesel,
Industrial Diesel Oil, Heavy Fuel Oil)

Advantages of our Oil/Gas Wetback Firetube Boiler

Drier Steam Output Longer Boiler Life


The large drum volume of Maxitherm Boiler Three pass design of Maxitherm Boiler provides
increases the steam / water interface. This reduces higher heating surface area, this means that the
the level of water entrainment, resulting in drier heat transfer is spread across a larger surface, thus
steam reducing thermal stress. Lower thermal stress on
boiler pressure parts improves the life span of our
Better Handling of Fluctuation in Steam Load boiler.
This large drum volume also increases the available
steam space, hence increases the ability of our Lower Fuel Cost
boiler to handle steam load fluctuations. The completely water cooled combustion chamber
and furnace increases the portion of radiant heat-
Easier Accessibility ing surface, lowering the gas temperature at the
Access to the gas reversal chamber is simple and entrance to the first convection pass and increases
fast via a small hinged manway. the overall operating efficiency of the boiler. This
results in lower fuel cost.
Lower Maintenance
With wetback construction, the complicated Excellent Burner Compatibility
refractory system required by dryback boiler with The Maxitherm Boiler has generous furnace dimen-
it's costly shut down and replacement problems sion and can accept awide variety of packaged
are elminited. burners which can be supplied in various versions
to suit specific site operating conditions and
Maximum Security customer requirements.
Maxitherm Boiler is equipped with an integrated
boiler management system which controls every Cooler Boiler Room
facet of the boiler's operation and coordinates all Lower boiler outer surface temperature in wetback
the safety requirements needed for fully automatic construction results in cooler boiler room. This is
combustion, steam pressure control and top qual- due to more efficient circulation of heat to prevent
ity water level secuity. excessive build up at specific heat spots.
OIL/GAS WATERBACK
FIRETUBE BOILER

Product General Arrangement

Note: The above diagram is a representation. Actual drawings will vary accordingly.

Product Range

Firing Rates* Dimension (mm)


Shipping
Evaporation Weight
(kg/h) Light Oil Heavy Oil Nat. Gas L.P. Gas (kg)
Length Width Height
(kg/h) (kg/h) (m3/h) (m3/h)

1500 111.0 113.8 130.5 52.0 3836 2385 2130 6050

2000 148.0 151.7 174.0 69.3 4076 2395 2170 6150

3000 221.0 226.5 261.0 104.0 5214 2545 2420 8950

4000 295.0 302.4 348.0 138.6 6121 2545 2420 10250

5000 369.0 378.2 435.0 173.3 5426 2945 2890 12250

6000 443.0 454.1 523.0 208.1 5994 2730 3220 15300

8000 591.0 604.8 697.0 277.7 6644 2430 3275 17650

10000 738.0 756.5 871.0 346.7 6804 2465 3360 20600

12000 886.0 908.2 1045.0 416.3 6804 2550 3580 22000

14000 1033.0 1058.8 1219.0 485.3 6804 2700 3935 25500

16000 1181.0 1210.5 1394.0 554.9 6804 3500 4220 30300

Note: The above data is for representative purpose and is not comprehensive. For further information, please contact us.

You might also like