Professional Documents
Culture Documents
IPBR Reconfiguration
2. OVERVIEW
To reconfigure parameter of IPBR of Iub, is able to be done via MML command for IPA-RNC or sCLI
of fsclish for mcRNC. It is also via XML Provisioning. The parameter change refers to NCR Object
Plan.
- IPBR On RNC SIDE
a. IPBR Configuration via MML
Syntax
QRU:<action mode>:
<ip_based_route_id>,<ip_based_route_name>:
[ip_based_route_bandwidth]:[committed_bandwidth]:
[committed_signal_bandwidth]:[committed_dcn_bandwidth]:
[ifc_option],[ifc_ratio]:
[mux_enable],[local_mux_port],[remote_mux_port],[max_packets],[mux_dscp];
Examples NCR
Ensure no new alarm and all WCELs state are up as previously before leaving from the Site.
3. Rollback
If the fallback must be needed, it is able to be done as describes above. BTS (NB) must be connected via
BTS Manager.