Professional Documents
Culture Documents
Product Description
Automatic Transfer System Product Description
V1.0
TABLE OF CONTENTS
FIGURES
TABLES
1 Product Overview
As the society develops, people required better power supply such as two power sources
even three power sources to keep continuous power supply. This will need a device to
transfer between two power sources and three power sources.
ATS is an automatic transfer system used for auto-transferring between Genset and
Genset (time configurable), Genset and Mains etc. together with intelligence control
panel, it’s easy for maintenance.
2 Working Principle
ATS cabinet comprises of transfer switch, controller panel, circuit, and encloser. It can
carry out automatic transfer to keep one input power supply: While Mains available, it’s
on the Mains end for power supply; While Mains fail, it will transfer to Genset end for
power supply. While Mains recover, it will return to Mains end for power supply. Mains
and Genset will not supply power at the same time.
It can carry out automatic transfer among 3 inputs to keep one power supply: While
Mains available, it’s on the Mains end for power supply; While Mains fail, it will transfer to
prior Genset end for power supply; While prior Genset faulty or time up, it will transfer to
standby Genset end; While standby Genset time up, it will transfer to prior Genset end;
While Mains recover, it will return to Mains end for power supply. Mains and Genset will
not supply power at the same time. (Dual auto-transfer can be set by time or by fault.)
3 ATS Capacity
The brand of automatic transfer switch is SOCOMEC or TAKADA, they are famous
switch manufacturers, who manufactures automatic transfer switch strictly according to
IEC 60947-6-1, GB/T14048-11.
PC type, with 5000 cycles of electrical endurance, and 10000 cycles of mechanical
endurance.
Advantages
The controller is closely combined by panel and powder-coated steel enclosure, and the
panel is die-casting by flame-retarded and high strength plastic. All connections of
controller are connected by pin-like and locked up terminals, easier and more convenient to
connect, move, maintain and replace the device easily and conveniently.
AC measure accuracy 1%
16A/250VAC
Aux relay output
3A/30VDC
5 Cabinet outline
The side walls of ATS cabinet are made by cold-rolled steel, its thickness is not less than
2mm, the external surface with special plasticized treatment achieve rust-proof effect.
ATS cabinet has enough operation & maintenance space and theftproof locks, the
protection grade reaches to IP54.