Professional Documents
Culture Documents
• General . . . . 50
General
The Landslide appliance operating system discovers installed NICs and assigns logical
port names to the NIC ports in a specific order that cannot be overridden. This order is
dependent on number, location and type of NIC installed in the appliance. This discovery
and logical port assignment cannot be changed by the user.
Appliance NIC placement and port assignment is optimized to provide the best attainable
performance for the Landslide application.
Note: The L-ACC-006 IPSec accelerator card is discontinued and is included for
reference only.
L-NIC-31B Quad-port, 1Gbps 1 GbE, 10/100/1000Base-SX C50-S4, C100- Table A-7 through
fiber Ethernet M4 Table A-10
server adapter
L-NIC-32B Quad-port, 1Gbps 1 GbE, 10/100/1000Base-T C50-S4, C100- Table A-7 through
copper Ethernet M4 Table A-10
server adapter
L-NIC-27 Dual-port, 10 10 GbE, SFP+ performance C50, C100, Table A-13 through
Gbps SFP+ interface with custom FPGA, C100-S2 Table A-17
Ethernet adapter 10GBASE-SR, 850 nm MMF Not supported by
with custom C50-S4, C100-
FPGA M2, C100-M4
L-NIC-66 Quad-port, 10 10 GbE, SFP+ 10GBASE-SR 850 C50-S4, C100- Table A-2 through
Gbps SFP+ nm MMF M2, C100-M4 Table A-6
Ethernet server (M2 Only:
adaptor Table A-11 &
Table A-12)
L-NIC-73 Dual-port, 25 25 GbE, SFP28 25GBASE-SR C100-M4 only Table A-7 through
Gbps, SFP28 (850nm MMF) & Table A-10
Ethernet server 25GBASE-CR (direct attach
adaptor twinaxial copper)
(SFP28 25GBASE-LR, 1310nm
SMF optics available)
L-NIC-74 Dual-port, 40 40 GbE, QSFP+ 40GBASE-SR4 C100-M4 only Table A-7 through
Gbps, QSFP+ (850nm MMF) & Table A-10
Ethernet server
40GBASE-CR4 (direct attach
adaptor
twinaxial copper)
(QSFP+ 40GBASE-LR4,
1310nm SMF optics available)
L-ACC-006 Legacy IPSec Legacy IPSec Accelerator Card C50, C100, Table A-11 and
Accelerator Card C100-S2, C100- Table A-17
M2
L-ACC-007 Basic IPSec Basic IPSec Accelerator Card C50-S4, C100- Table A-7 through
Accelerator Card M4 Table A-10
Note: Revision G of the C100 and C50 chassis makes provision for a seventh slot, slot 0,
located to the left of slot 1. Slots 0 and 6 are not used by Landslide. In all other respects
revision G, and later, chassis are identical to earlier revisions.
The standard factory default C100-M4 test server configuration includes two L-NIC-32A/
32B quad-port, copper Ethernet NICs installed in slots 1 and 2. These NIC ports are
labeled as eth2 through eth9. Optional add-on test server appliances support the NIC
configurations as detailed in the following tables
Warnings: • The L-NIC-66 is only supported in the C50-S4 and C100-M2/M4 test
server models. Any attempt to operate the L-NIC-66 in any unsupported
configuration or appliance will void the factory warranty and can result
in unexpected behavior and damage to the host appliance.
Table A-2. One, two, three, or four quad-port 1 Gbps, 4x, 8x 12x or 16x 1 Gbps ports
0 Unused NA
6 Unused NA
Table A-3. One or two quad-port 10 Gbps NICs with no additional NIC cards, 4x or 8x 10
Gbps ports
0 Unused NA
2 Empty NA
3 Empty NA
6 Unused NA
Table A-4. Three or four quad-port 10 Gbps, 12x or 16x 10 Gbps ports
0 Unused NA
6 Unused NA
Table A-5. One quad-port, 10 Gbps NIC and one, two, or three quad-port 1 Gbps NICs, 4x
10 Gbps ports and 4x, 8x or 12x 1 Gbps ports
0 Unused NA
6 Unused NA
Table A-6. Two quad-port 10 Gbps NICs and one or two quad-port 1 Gbps, 8x 10 Gbps
ports and 4x or 8x 1 Gbps ports
0 Unused NA
6 Unused NA
Table A-7. One or two dual-port, 25 GbE or 40 GbE NICs with no additional NIC cards, 2x
or 4x 25/40 GbE Ports
0 Unused NA
2 Empty NA
3 Empty NA
6 Unused NA
Table A-8. Three or four dual-port 25 GbE or 40 GbE NICs with no additional NIC cards, 6x
or 8x 25/40 GbE ports
0 Unused NA
6 Unused NA
Table A-9. One dual-port, 25 GbE or 40 GbE NIC and one, two or three quad-port 1 GbE
NICs, 2x 25/40 GbE ports and 4x, 8x or 12x 1 GbE ports
0 Unused NA
6 Unused NA
Table A-10. Two dual-port 25 GbE or 40 GbE NICs and one or two quad-port 1 Gbps, 4x 25/
40 GbE ports and 4x or 8x 1 GbE ports
0 Unused NA
6 Unused NA
Table A-11. One quad-port, 10 Gbps NIC and one, two, or three quad-port 1 Gbps NICs, 4x
10 Gbps ports and 4x, 8x or 12x 1 Gbps ports
6 Unused NA
Table A-12. Two quad-port 10 Gbps NICs and one or two quad-port 1 Gbps NICs, 8x 10
Gbps ports and 4x or 8x 1 Gbps ports
6 Unused NA
Table A-13. One, two, three or four quad-port 1 Gbps NICs, 4x, 8x, 12x, or 16x 1 Gbps
ports (L-ACC-006 IPSec Accelerator Card optional)
Table A-14. One dual-port 10 Gbps NIC and one, two or three quad-port 1 Gbps NICs, 2x
10 Gbps ports and 4x, 8x or 12x 1 Gbps ports (L-ACC-006 IPSec Accelerator
Card optional)
Table A-15. Two dual-port 10 Gbps NICs and one or two quad-port 1 Gbps NICs, 4x 10
Gbps ports and 4x or 8x 1 Gbps ports (L-ACC-006 IPSec Accelerator Card
optional)
Table A-16. One, two, three or four dual-port 10 Gbps NICs, 2x, 4x, 6x or 8x 10 Gbps ports
(L-ACC-006 IPSec Accelerator Card optional)
Table A-17. Three dual-port 10 Gbps NICs and 1x quad-port 1 Gbps NIC, 6x 10 Gbps
and 4x 1 Gbps ports (L-ACC-006 IPSec Accelerator Card optional)