Professional Documents
Culture Documents
If moisture, water or fog liquid gets inside the machine, immediately unplug the unit
and wipe off and keep it dry.
Structural modification inside the machine is not allowed at anytime, please do not
attempt to modify the machine by removing the cover, otherwise burns may result.
or animals.
damge to internal parts.
M-20
Fill with high-quality, water-based fog liquid about 3/4 full recommended by Antari
dealer.
M-20
To emit fog press the appropriate button on the M-20 control module for fogging
duration, interval and volume
The limited warranty is based on 8-hour operation per day. Exceeding usage may
shorten the lifetime of machines.
35
3.
1. 2.
5.
4.
6.
3.
8.
7.
10.
1 4.
11. 15.
9.
13.
12.
M-20 M-30
(M-20)
M-20 M-30
Fluid level sensor is installed on the unit. The machine ‘s pump will automatically
stop working if the fluid is lower than usable level. It will re-start when
temperature reaches working level Always monitor tank fluid level as you are
operating making sure there’s sufficient liquid in the tank..
Of the above appears to be O.K., plug the unit again. If fog does not come out, check
the hose attached to the tank to make sure there is fluid going through the hose. If you
are unable to determine the cause of the problem, do not simply continue pushing the
remote button, as this may damage the unit. Return the machine to your Antari dealer.
-Input voltage US model : AC 100-120V, 50 / 60Hz 12.5A EU model : AC 220-240V, 50 / 60Hz 13A
EU model : AC 220-240V, 50 / 60Hz 6.6A
- Rated power 1500W 3000W
- Warm-up time 8 minutes (approx.) 9.5 minutes (approx.)
- Fluid consumption 160 ml/min 250 ml/min
- Fluid tank capacity 10l (2.64gal) 10l (2.64gal)
- Compatible fluid Antari FLG-10 Heavy Fog Fluid Antari FLG-10 Heavy Fog Fluid
Antari FLR-10 Light Fog Fluid Antari FLR-10 Light Fog Fluid
- Operating time 60 mins at max. output 40 mins at max. output
- Ambient temp. range 0°C - 40 °C (32°F-104 °F) 0 °C - 40 °C (32 °F-104 °F)
3 3 3 3
- Output 25,000 ft /min (708 m /min) 50,000 ft /min (1416 m /min)
- Control DMX512, Timer, Manual, DMX512, Timer, Manual,
Wireless (Optional) Wireless (Optional)
- DMX channels 1 channel 1 channel
- Connection Neutrik Powercon (Power) Neutrik Powercon (Power)
XLR 3-pin and 5-pin (DMX) XLR 3-pin and 5-pin (DMX)
- Optional accessories M-30 Pro Wireless Control Module M-30 Pro Wireless Control Module
FX-5 Flightcase FX-5 Flightcase
M-5-HB Hanging Bracket
- Dimension L668 W320 H276 mm L690 W320 H298 mm
(L26.30 W12.60 H10.87 inch) (L27.17 W12.60 H11.73 inch)
- Weight 15.5 kg (34.17 lbs) 21 kg (46.30 lbs)
M-20 : M-20
M-30: M-20
M-30
M-20 M-30
All fog machines develop condensation around the output nozzle. This may result in some
moisture accumulation on the surface below the output nozzle, gently wipe it clean. If
abnormal condensation is detected, please check your choice of fog liquid due to impurity.
Kindly stop using to ensure life span of the machine.
6
Maintenance / Storage
Do not allow the fog liquid to become contaminated. Always replace the caps on the fog
liquid container and the fog machine liquid tank immediately after filling. Do not operate
the fog machine without liquid at any time.
Clean with a dry cloth only. Store dry. Cleaning your fog machine regularly will help
reduce costly replacement and repair charges.
Note: All fog machines are prone to clogging due to the thick consistency of fog liquid
and the high temperature at which it vaporizes. It is strongly recommended that to
do regular maintenance and services. A properly maintained fog machine should
provide years of reliable use.
It is strongly recommended to test-run the machine on a monthly basis in order to
achieve its best fogging condition. A test-run consists of warming up the machine
followed by a few minutes of emission. Then please cool down the machine.
2 3 1 1 3 2 5 1 1 5
3 3
4 2 2 4
Pin Function
1 Ground
2 Data -
3 Data +
7
Antari M-5 & M-10 on-board DMX settings
Channel A Channel B
251-255
Nonstop Burst
6-255
Volume Control
(5% - 100%; 255 is the
maximum output)
0-250 OFF
0-5 OFF
The fog machines M-5 & M-10 have on-board DMX control. They use 2
channels to control volume output operation. Channel A has a value range of
0 to 255 and Channel B has a range of 251 to 255. Timer functions such as
duration and interval can be programmed via the DMX controller or the DMX
control software used by the lighting and effects operator.
Function Priority
When Channel A is set to a value between 6 to 255 and Channel B is set
between 251 to 255 at the same time, Channel B will override Channel A and
the unit is in Nonstop Burst mode.
Addressing Example
If the unit is assigned to DMX address 124 e.g., Channel A corresponds to
DMX address 124 and DMX address 125 will automatically be selected for
Channel B.
The Antari fog machines M-5 & M-10 with on-board DMX conform to the
following performance specifications:
8
9
M-20
3.
1. 2.
5.
4.
6.
3.
8.
7.
10.
14.
11. 15.
9.
(M-20)
13.
12.
M-20 M-30
( M-20)
M-20 M-30
-Spannungsversorgung US model : AC 100-120V, 50/60Hz 12,5A EU model : AC 220-240V, 50/60Hz 13A
EU model : AC 220-240V, 50/60Hz 6,6A
-Gesamtanschlusswert 1500W 3000W
-Aufwärmzeit 8 Minuten (ca.) 9,5 Minuten (ca.)
-Fluidverbrauch 160 ml/min 250 ml/min
-Tankinhalt 10l (2,64gal) 10l (2,64gal)
-Kompatible Nebelflüssigkeit Antari FLG Heavy Fog Nebelflüssigkeit Antari FLG Heavy Fog Nebelflüssigkeit
Antari FLR Light Fog Nebelflüssigkeit Antari FLR Light Fog Nebelflüssigkeit
-Betriebszeit 60 min bei max. Ausstoß 40 min bei max. Ausstoß
-Umgebungstemperaturbereich 0°C - 40 °C (32°F-104 °F) 0 °C - 40 °C (32 °F-104 °F)
3 3 3 3
-Leistung 25.000 ft /min (708 m /min) 50.000 ft /min (1416 m /min)
-Steuerung DMX, Timer, manuell DMX, Timer, manuell
Funk (optional) Funk (optional)
-DMX-Kanäle 1 Kanal 1 Kanal
-Anschluss Neutrik Powercon (Power) Neutrik Powercon (Power)
XLR 3-pol und 5-pol (DMX) XLR 3-pol und 5-pol (DMX)
-Zubehör M-30 Pro Funksteuerung M-30 Pro Funksteuerung
FX-5 Flightcase FX-5 Flightcase
M-5-HB Montagebügel
-Maße L668 B320 H276 mm L690 B320 H298 mm
(L26,30 W12,60 H10,87 inch) (L26,30 B12,60 H10,87 inch)
-Gewicht 15,5 kg (34,17 lbs) 21 kg (46,30 lbs)
M-20 : M-20
M-30: M-30 M-20
M-30
M-20 M-30
Wartung & Lagerung
Achten Sie darauf, dass das Nebelfluid nicht verunreinigt wird. Setzen Sie sofort nach
Befüllen des Tanks den Deckel des Tanks sowie des Kanister wieder auf. Betreiben
Sie Ihr Nebelgerät nie ohne Flüssigkeit.
Reinigen Sie das Gerät nur mit einem trockenen Tuch. Trocken lagern.
2 3 1 1 3 2 5 1 1 5
3 3
4 2 2 4
3 pin XLR 5 pin XLR
Contact Fonction
1 Masse
2 Signal-
3 Signal+
6-255
( 5% - 100%; maximaler
Aussto bei 250)
Kanal A (Nebelausstoß)
Zwischen den Werten 0 und 5 von Steuerkanal A ist das Gerät aus.
Zwischen den Werten 6 bis 255 wird der Nebelausstoß reguliert.
Dabei bezieht sich der Wert 6 auf den minimalen Nebelausstoß und
255 auf den maximalen Nebelausstoß. Der Nebelausstoß steigt mit
zunehmendem DMX-Wert.
Kanal B (Dauernebel)
Zwischen den Werten 251 und 255 von Steuerkanal B befindet sich
das Gerät im Dauernebelmodus und läuft bei maximalem
Nebelausstoß. In diesem Modus reguliert sich das Gerät
automatisch und produziert eine große Menge Nebel. Dabei benötigt
es keine erneuten Aufheizphasen und stößt konstant Nebel aus.
Funktionsvorrang
Wenn Steuerkanal A zwischen den Werten 6 bis 255 und gleichzeitig
Steuerkanal B zwischen 251 bis 255 eingestellt ist, hat Steuerkanal
B Vorrang und das Gerät befindet sich im Modus Dauernebel.
251
M-20
3.
1. 2.
5.
4.
6.
3.
8.
7.
10.
14.
11. 15. (M-20)
9.
13.
12.
2m
M-30: M-20
M-30
M-20: M-20
Maintien & l'Entreposage
Faites toujours attention de ne pas polluer le liquide à fumée. Après l'avoir rempli de
liquide à fumée, refermez toujours immédiatement les couvercles du bidon de liquide et
du réservoir de la machine.
2 3 1 1 3 2 5 1 1 5
3 3
4 2 2 4
Kontakt Funktion
1 Masse
2 Signal-
3 Signal+
6-255
0-250
0-5
Priorité de Fonction
Si les valeurs de canal A sont reglé entre 6 et 255 et les valeurs de canal
B sont reglé de 251 à 255 au même temps, le canal B abroge le canal A
et l'appareil se trouve en mode fumée constante..
251
M-20
M-20
M-20 制
機器的保固是以一天8小時操作為計算單位,超負荷使用可能會造成機器壽命的減短。
M-20
M-20
使用前請小心判定電壓伏特數,如果使用所有規格的機種並應配合接地型插座使用。
內時
觸
煙霧機在使用一段時間後,噴嘴附近會有一些灰色沉澱物質,是因為煙霧油經過熱交換
而產生的自然現象,只要將他擦乾淨即可,如發現噴嘴附近有黑色濃稠的沉澱物時,請
檢視所用的煙霧油,是否為成分不良品,並請停止使用,以維護機器使用壽命。
吊架(選配)
3.
M-5機器各部份說明
1. 2.
1.噴 嘴
2.外 殼
3.把 手
4.油 桶 及油桶蓋
5.
4. 5.油 管 及濾嘴
6. 6.連 接 頭
7.DMX 訊號 輸 出 端 ( 3Pin 接 頭)
8.DMX 訊號 輸 入 端 ( 3Pin 接 頭)
9.DMX 訊號 輸 出 端 ( 5Pin 接 頭)
3.
10.DMX 訊號 輸 入 端 ( 5Pin 接 頭)
8. 11.電源 開/關
12.保 險 絲座(保險絲規格
7. 120V/15A, 230V/7A)
10.
14. 13.電 源 線
11. 15.
9. 14.防 震 腳
13. 15.M-20液 晶 控制器
12.
吊架
10公升油桶
油桶蓋
墊片
長柄 固 定 螺 絲
墊片
㆕個環 型 的 螺 絲 墊片,
需放置 於 吊 架 內 側及機器的 ㆗ 間
M-8螺絲用 於 固 定 長 柄螺絲以便
長柄 固 定 螺 絲 於調整 角 度
L CD 液晶螢幕 功 能鍵
LCD液晶 螢 幕
5PIN XLR 連接
發射 器
5PIN XLR連接
功能鍵
M-30 無線 控 制 器:
M-30 M-20
L CD 液晶螢幕 線長:2M
遙控距離: 最多50米
啟 動(藍色) 停止(紅色) 連接頭:5PIN XLR
㆝線
頻道位址:0~8
5PIN XLR 連接 功能鍵
LCD液晶螢幕
功能鍵
發射器
1 0公 升-油 桶
油桶蓋
M-20液晶螢幕控制器線長2米
5PIN XLR連接頭
功能: 設定時間、噴煙間距、噴煙量大小、
DMX位址、持續噴煙量、手動開/關
及 記憶的功能
㆝線
啟動(藍色) 停止(紅色)
LCD液晶螢幕
功 能鍵
LCD液晶螢幕
發射器
5PIN XLR連接
功能鍵
5PIN 的XLR接頭
- 電壓 美規: AC 100-120V, 50 / 60Hz 12.5A 歐規: AC 220-240V, 50 / 60Hz 13A
歐規: AC 220-240V, 50 / 60Hz 6.6A
- 額定功率 1500瓦 3000瓦
- 加熱時間 (約) 8 分鐘 (約) 9.5 分鐘
- 耗油量 160 毫升/分鐘 250 毫升/分鐘
- 油桶容量 10公升(2.64加侖) 10公升(2.64加侖)
- 適用煙霧水 Antari FLG 濃煙霧水(淡綠色) Antari FLG 濃煙霧水(淡綠色)
Antari FLR 淡煙霧水(淡紅色) Antari FLR 淡煙霧水(淡紅色)
- 運作時間 (最大輸出量下) 60 分鐘 (最大輸出量下) 40 分鐘
- 適用環溫 0°C - 40 °C (32°F-104 °F) 0 °C - 40 °C (32 °F-104 °F)
- 輸出量 25,000 ft 3 /min (708 m 3 /min) 50,000 ft 3 /min (1416 m 3 /min)
- 控制方式 DMX512, 定時控制, 手動控制, DMX512, 定時控制, 手動控制,
無線控制(選配) 無線控制(選配)
- DMX512頻 道 占用1 頻道 占用1 頻道
- 連接座 Neutrik Powercon (主電源) Neutrik Powercon (主電源)
XLR 3-pin 及5-pin (DMX512) XLR 3-pin 及5-pin (DMX512)
- 選擇性配件 M-30 Pro 無線控制模組 M-30 Pro 無線控制模組
FX-5 飛行箱 FX-5 飛行箱
M-5-HB 吊架
- 尺寸 長668 寬320 高276 mm 長690 寬320 高298 mm
(長26.30 寬12.60 高10.87 inch) (長27.17 寬12.60 高11.73 inch)
- 重量 15.5 公斤(34.17 lbs) 21 公斤(46.30 lbs)
DMX連 接PIN的接點 說 明
本機提供3 Pin或5 PIN XLR的DMX連接。下方為Pin的接點說明:
2 3 1 1 3 2 5 1 1 5
3 3
4 2 2 4
Pin 功能
1 接地
2 數據-
3 數據+
請妥善保存此操作手冊
Antari M-5 & M-10 內建 DMX 設定說明
頻道說明 A 頻道說明 B
251-255
6-255 Nonstop Burst
Volume Control (持續噴煙量)
輸出量(5%-100%,
250是最大輸出量)
0-250 OFF / 關
0-5 OFF / 關
頻道A:
如果將DMX頻道A位置被設定在0~5,則煙霧機停止動作。
DMX位置在6至255中可以線性的控制煙霧的輸出量。在 6 的時候,
煙量輸出是最小的,而在255的時候,煙霧機則提供100%的輸出。
頻道B:
如果將DMX頻道B位置被設定在250~255時,煙霧機會進入Nonstop Burst
模式,在此模式下,煙霧機會自動調整適當的煙量,而不需要停下來加熱,來
提供不間斷的煙霧輸出。
動作㊝先順序說明:
當A頻道的輸出量設定數值在6~255之間時,B頻道的數值設定在250至255之間時
,會以B頻道的功能為主。
舉例說明
如果將DMX位址124設為頻道A,則下組位址125會自動被選為頻道B來使用。
整體而言,ANTARI的內鍵DMX功能的煙霧機,
都能配合所有專業演出的控制要求。
M-20
M-30
C08M05002