Professional Documents
Culture Documents
WELDING ELECTRODE
Fully positional, highly basic coated, low hydrogen electrode for welding creep-
Product Description resisting steels.
Excellent de-slag, re-strike and general welder appeal. The addition of iron powder
gives a recovery of 110%.
Suitable for welding 9%Cr 1%Mo creep-resisting steels. Used mainly by the power
Applications engineering industry for headers, steam piping and turbine rotors.
Typical material grades :- ASTM A336 Grade F9, ASTM A217 C12, BS1504 Grade
629 and BS3100 Grades 629/470. DIN G-X 12CrMo 10 1, ASTM A335 Grades P9.
Electrode Dia (mm) 1.6mm 2.0mm 2.5mm 3.2mm 4.0mm 5.0mm 6.0mm
Packaging Information
Storage
Storage and Re-Drying It is recommended that the WB range of electrodes are stored in a dry heated store at
a minimum temperature of 18C, and a maximum relative humidity of 60%. To avoid
damage to the coatings no more than 6 cartons should be staked on top of another.
Re-drying
Re-dry @ 350C for 2 hours and then transfer to holding oven and hold @ 100 -
200C, or 50-100C in heated quiver.