Professional Documents
Culture Documents
DC-DC converter based on three winding coupled inductor that boosts the
voltage. This topology includes high frequency coupled inductor and voltage
multiplier cells[1]. The main aim is to increase the voltage gain. The output
voltage is clamped across the capacitor of Voltage Multiplier Cells (VMC). Only
one active switch is used which is MOSFET. The voltage stress is decreased and
overall efficiency is been improved. The number of diodes can be reduced by
increasing the number of secondary windings of coupling inductor. The leakage
inductance of the coupled inductor is recycled by switching capacitor and can be
directly transferred to load.
OBJECTIVE
To obtain a new topology of step-up dc-dc converter based on three winding
coupling inductor and voltage multipliers cell (VMC) which will increase the
voltage at the output.
Voltage stress at switch and diodes is reduced.
methodlogy
In step-up dc-dc converter has many diodes which can be replaced by three
couple inductor winding.
Voltage multiplier gain is also added with a single active switch.
The one active switch will reduce the voltage stress and improves the
efficiency of the circuit.
Overall the voltage and power at the output will increase.
Excepted outcm
In this continues conduction mode (CCM) is discussed. Voltage gain of the
converter is compared with similar converter.
Simplicity of control and implementation due to utilizing only one active
switch is one of the advantage of this proposed topology.
Recycling the energy of the leakage inductance of the coupling inductor
leads to an improved efficiency.
The voltage of the active switch is clamped to a low voltage capacitor,
which prevents the power switch from high voltage spike.
Reduction of voltage stress for the active switch result in use of switch
with low on-resistance which leads to further increase in the overall
efficiency.
Formula