Professional Documents
Culture Documents
SAMAND LX
SAMAND LX EF7 BI- FUEL
SAMAND LX EF7 GASOLINE
e-code: 540701E002-36
KM.14 Karaj Makhsous Rd,
Owner’s Manual
9007051052133-36
Shahid Lashgari Highway, Tehran, IRAN
Postal Code : 1389913657
Tel: (+9821) 48901
Fax: (+9821) 44934000-1
SMS Centre: (+98)30003 This manual has been prepared to inform you of how to optimize the use of the
E-mail: info@ikco.ir vehicle and contains important notes on safety, operation and maintenance.
www.ikco.ir Please keep this manual in your car at all times and be diligent in maintaining it.
In The Name of God
OWNER’S MANUAL
SAMAND
DEAR BUYER
We're thankful for choosing Iran Khodro product and we congratulate you for this good selection. We hope this new vehicle contributes
in happy moments of your life.
This manual helps you enjoy driving. Therefore to have an easy access, it would be advisable to be kept in your glove compartment.
The manual is divided into some sections for your convenience, and deals with various aspects of driving or maintenance of the car.
Before driving: Includes seat adjustment, Safety belts, heating and ventilation control system and also every other thing you needed
to know in order to settle comfortably.
Driving Controls: explain functions of switches, equipment and precautions.
Maintenance: Includes information about the checks you should carry out regularly.
Note:
Please refer to maintenance and guaranty services manual to know about the vehicle maintenance, regulation & condition
of guaranty services and periodic services.
Technical emergencies: Help solve some of unavoidable small emergencies occurring occasionally like replacing lamps fuses or changing wheels.
Technical data: It includes some information about engine, dimensions, capacities and weights.
WARNING, CAUTION and NOTE have special meanings. These special meanings apply except when laws or regulations require that
the signal words be used with a different meaning. Pay special attention to the messages highlighted by these signal words:
- In the meanwhile, consumptive material must be provided through authenticated representatives of IKCO.
NOTE: Indicates a serious damage to your vehicle in the case of not paying attention to the warning and caution signals.
Important Point: The specification of each vehicle will vary according to its type. Therefore some information of this manual may not be
true about your vehicle. For any more information, you can consult with IRAN KHODRO dealers.
Reminder : Information about other varieties of this product have been mentioned in this manual and denoted by asterisk (*).
2
INDEX
SAMAND AT A GLANCE 1
BEFORE DRIVING 2
DRIVING 3
MAINTENANCE 4
TECHNICAL EMERGENCIES 5
TECHNICAL DATA 6
INDEX 7
3
OVERVIEW
1
DOOR LOCKING & UNLOCKING..........................................................................................................................................................22-25
SEAT BELT PRE-TENSIONERS AND FORCE LIMITERS .................................................................................................................. 33
CHILD SAFETY .................................................................................................................................................................................... 34-35
HEATING / VENTILATION .................................................................................................................................................................... 44-47
WINDOWS DEMISTING / DEFROSTING ................................................................................................................................................ 47
TRUNK LID ACCESS VENT ..................................................................................................................................................................... 51
INTERIOR EQUIPMENT ......................................................................................................................................................................48-53
ALARM (ACU) *...................................................................................................................................................................................... 56-73
ANTI THEFT *....................................................................................................................................................................................... 74-75
DIGITAL DISPLAY PANEL ................................................................................................................................................................... 88-89
INTELLIGENT CRUISE CONTROL * .................................................................................................................................................. 91-92
STARTING / DRIVING ...........................................................................................................................................................................93-94
STARTING / DRIVING (CNG)* ...........................................................................................................................................................98-100
CNG FUELING STEPS (CNG)* ............................................................................................................................................................ 103
MICRO-HYBRID*.........................................................................................................................................................................................104
INDICATORS & WINDSHIELD WIPER / Washer ................................................................................................................................... 107
BRAKES ..................................................................................................................................................................................................... 108
AIR BAG * ..............................................................................................................................................................................................111-112
MAINTENANCE AND INSPECTING IMPORTANT POINTS ............................................................................................................113-116
ENGINE COMPARTMENT ................................................................................................................................................................ 117-123
BATTERY MAINTENANCE AND SERVICE OF BATTERY .................................................................................................................... 124
TECHNICAL EMERGENCIES (CHANGING WHEELS, STARTING VEHICLE IN EMERGENCY SITUATIONS, TOWING, CHANGING
FUSES, CHANGING LAMPS) ................................................................................................................................................................... 135
* If equipped
4
1 SAMAND AT A GLANCE
* If equipped
5
SAMAND AT A GLANCE
1. Gear lever
1 2. Heating / Ventilation keys
3. Clock*
4. Fuel type conversion switch*
5. Trunk lid unlock switch*
6. Rear glass heater / Flasher Switch
7. Windshield wiper / Washer Stalk
8. Digital instrument panel
9. Indicators / Horn
10. Hood release lever
11. Adjustable air vent (Right, Middle, Left)
12. Handbrake
13. Audio system (REFER TO AUDIO
SYSTEM MANUAL)
14. Front lighter & cigarette Ashtray
15. Alarm Control Unit (ACU)*
16. Ignition switch
17. Instrument panel dimmer switch*
18. Airbag
19. Steering wheel adjusting lever
20. Rear window locking switch*
21. Electric window controls*
22. Electric mirror controls*
23. Passenger air bag
* If equipped
6
SAMAND AT A GLANCE
Controls*
1- Clock 1
2- Ventilation System
3- Passenger Air bag
4- Passenger Air bag deactivation switch
5- Trunk Lid Unlock Switch
6- Flasher Switch
7- Central Lock Key
8- Windshield Wiper/Washer Stalk
9- Digital instrument panel
10- Indicators/Horn
11- Hood Release Lever
12- Air vent
13- Hand brake
14- Audio System (Refer to the audio
system Manual)
15- Ashtray and Lighter
16- Ignition switch
17- Driver air bag
18- Steering Wheel Adjusting Lever
19- Rear Window Locking Switch
20- Glass lift button
21- Adjusting the side mirrors
22- Adjusting of head light height
23- Mobile location
24- USB,AUX-IN inputs
25- Gear lever
* If equipped
7
SAMAND AT A GLANCE
Note
Position D) The engine is switched, and
There is possibility of breakage for
releases the switch immediately after the
internal parts of the remote controller in
engine runs. The switch automatically returns
case of sever impact and subsequently
to the second position.
not functioning of the immobilizer.
9
SAMAND AT A GLANCE
* If equipped
11
SAMAND AT A GLANCE
Lamp switches indicators & horn 6- Horn Windshield wiper & screen washer
1- Small lights (front/rear) - Instrument 7- Right Indicator 1. off
Panel backlight and Center Console. 8- Left Indicator 2. Intermittent wipe (is adjusted according
2- Head lamp main beam / up to the vehicle speed).
3- Head lamp dip light. (pulling the lever 3. Slow speed wipe
towards the driver) 4. Fast speed wipe
4- Front fog lamps.* 5. Single wipe
5- Front fog lamps* and Rear. 6. Screen wash (Pulling the control lever
towards the drive)
* If equipped
12
SAMAND AT A GLANCE
* If equipped
13
SAMAND AT A GLANCE
* If equipped
14
SAMAND AT A GLANCE
15
SAMAND AT A GLANCE
16
SAMAND AT A GLANCE
Releasing trunk lid lever and cable* To lock well the trunk lid, please put the Access flap to boot*
Pull down the armrest located in the mechanisms lever in the near place. The flap is located at back of the rear
middle of the rear seat, and release trunk armrest and is used for carrying long
lid latch Then pull down the latch till it will objects such as ski sticks or accessing to
be placed on the armrest. Take your hand the boot through passenger compartment
beneath left side of rear shelf.
There is a lever and a cable installed - it Lower the armrest. Pull the handle down
can be accessed (from the interior of then towards you to open the flap.
the trunk) - which will open the trunk in
emergency occasions such as lack of
internal electricity power, malfunction of
trunk lock releasing button on the remote
keyless entry system and dashboard. In
the abovementioned situations slid the
lever to the right.
Therefore the trunk will be unlocked
mechanically. * If equipped
17
SAMAND AT A GLANCE
18
SAMAND AT A GLANCE
19
SAMAND AT A GLANCE
Warning
The failure to use non-leaded premium
gasoline will damage the catalytic
converter. Avoid strictly of combining
any liquid with the standard fuel.
* If equipped
20
SAMAND AT A GLANCE
* If equipped
21
1
22
2 BEFORE DRIVING
* If equipped
23
LOCKING AND UNLOCKING OF DOORS
Notice Note
Continuous pressing of the switches There is possibility of breakage for
internal parts of the remote controller in
within a short period causes their
case of sever impact and subsequently
function to be stopped for 20 second.
not functioning of the immobilizer.
24
LOCKING AND UNLOCKING OF DOORS
Locking/unlocking with the Key Lock/unlocking of the trunk lid* Child safety locks
Insert the key into the slot near the driver When the central (door) locking system is Positioned under the each rear door lock.
and turn left to unlock and right to lock. locked using the key, access to luggage The child locks prevent the opening of rear
All doors, trunk lid and fuel filler cap will area would be possible by using the key doors from the inside and act independent
be locked. for the trunk lid lock. Insert the key into the of the central (door) locking system.
trunk lid slot and turn left to unlock,and To latch the children just push the lever
then press lock button to open it. To lock down to operate.
again, turn the key to right and remove it.
Tip
If your vehicle is locked using the
remote control switch and you start
to open the vehicle doors or its rear
trunk by manual key, the burglar alarm
system will become activated and the
alarm will sound.
* If equipped
26
LOCKING AND UNLOCKING OF DOORS
Trunk lid lock release* Releasing trunk lid lever and cable* To lock well the trunk lid, please put the
Hold the remote control towards the radio Pull down the armrest located in the mechanisms lever in the place.
transmitter and press the button twice middle of the rear seat, and release trunk
with the trunk lid symbol (button”3”) on the lid latch. and pull down the latch till it will
remote keyless entry transmitter in less be placed on the armrest. Take your hand
than a second to open the trunk When the beneath left side of rear shelf. There is
central door locking system is activated a lever and a cable installed –it can be
with the remote transmitter or automatic accessed from the interior of the trunk -
warning locking system, Access to which will open the trunk in emergency
luggage compartment is possible; But we occasions such as lack of internal
should close the boot with in 30 seconds, electricity power, malfunction of trunk lock
otherwise the antitheft system and alarming releasing button on the remote keyless
will be activated. Therefore the car should entry system and dashboard. In the above
be unlocked by holding the remote control mentioned situations slid the lever to the
button at first( Pressing button “1”). To lock: right. Therefore the trunk will be unlocked
Only by locking trunk, the access to the mechanically.
trunk would be impossible completely. * If equipped
27
BATTERY REPLACEMENT
Notice:
Copy ing key is not enough for start up. It is
possible to have more keys if the customer
requests and only in IRAN KHODRO dealers
with the DIAG tool. To maintain better and
usage of your vehicle, it is necessary to pay Attention
Note
attention to the following tips: This system will check the engine’s
There is possibility of breakage for
1. Keys have electronic chip inside which electronic system, a little after the
internal parts of the remote controller in
contains information of key codes, so engine is turned off and thus prevent
case of sever impact and subsequently anyone without the main key from
avoid putting them near powerful electro
not functioning of the immobilizer. turning on the engine.
magnetic and electrical scopes.
29
SEATS
Warning
To avoid the decrease in efficiency of
2 the safety belt, it should be positioned
on your shoulder and make sure the
seat back is adjusted in an appropriate
and correct position.
* If equipped
32
SAFETY BELTS
33
SAFETY BELTS
Wearing safety belts Releasing the safety belt Adjusting height of front seat belts
Pull the belt across you slowly. Do not let Press the red button on the belt lock. The To adjust belt height, pull out the heigh
it get twisted. Insert the latch plate into the belts are designed to cover the body skeleton adjusting knob and fix it in some lower or
buckle until it clicks. A “click” ensures us (pelvis, chest and shoulders) and are only upper level.
that the two sections of the safety belts useful and safe when the seats are almost For safety reasons it is advisable that children
have joined together. Your vehicle has vertical. Do not allow the front passengers to should use the back seats of the vehicle.
a safety belt reminder light to remind us travel with the seat steeply reclined.
about fastening the driver’s belt. After
buckling up the drivers’ belt, the warning
light on the digital dashboard will turn off.
Warning
- All seatbacks should always be in an upright position while driving, or seat belt
effectiveness may be reduced. Never let the front passengers recline the front seats.
Otherwise the safety belt reminder light on digital display panel turns off.
- Do not let external objects (especially sticky substances) penetrate the buckle
causing its improper operation.
34
TRACTION SYSTEM A & PRESSURE LIMITER
35
CHILD SAFETY
Warning
- In order to maintain the safety, children under 13 years should sit on the seat backward.
Warning
- Children under 13 years should never sit on the seat front .
Nothing should be placed under the
Make sure of air bag deactivation while the infant seat back is located towards the road in
driver’s feet; otherwise it may slide
front passenger seat ;otherwise there is every possibility of sever injury or even death of the
under the pedals by a sharp braking infant due to air bag being opened. locate the seat in the middle position, longitudinally , adjust
and lead to malfunction of the brake the back vertically and activate the air bag while the infant seat is towards the road in front
in an emergency situation. passenger seat.
36
CHILD SAFETY
For children (weighing more than 15 kg) For heavy children –whose weight exceeds
equal or greater than 3 years old (more than the limits of standard seat- who are equal or
15 Kg), a booster seat can be used in the greater than 3 years old should be seated,
rear of the car, facing forward, using a 2 or 3 a forward- facing booster cushion, in the
point (lap or inertia reel) seat belt (especially rear of the car, using a 2 or 3 point (lap or
suitable for children roughly 3 to 6 years old). inertia reel) seat belt.
(Especially suitable for children roughly 3
to 6 years old).
Warning
-The children shall not be seated on
the lap of the passengers; otherwise
they may be hurt by an accident.
- Never fasten a seat belt at a time for
two persons.
37
SEATS
* If equipped
38
CHILDREN SAFETY
Installing baby seat’s hook belt In case the baby seat is installed where In case the baby seat is installed where
Pass the hook belt from seat back the portable headrest exists, you shall the fixed headrest is installed, you shall
whether it is single or dual designed in pull up the headrest, pass the hook belt pass the hook belt from above the
case no headrest is installed. See the under it, then pull it down, or if the hook headrest in case it is single designed.
below image. belt is dual designed, pass it from two
2
sides of the headrest. See the below
image.
39
CHILDREN SAFETY
The appropriate place of fastening baby seats equipped with seat belt hooks.
Seat Position
Warning
Front
2 Weight groups Bach central Back side
passenger
- Never place an object on floor of the
seat seat vehicle, because when the vehicle
seat
brakes, there is a risk of placing the
Group O Up to 10 Kg X U X object beneath the pedals which may
Group O+ Up to 13 Kg X U X cause severe dangers.
Group I 9 to 18 Kg UF UF X - Never let the children to seat on your
foot because there is a risk of severe
Group II 15 to 25 Kg UF UF X
dangers. Never fasten a seat belt for
Group III 22 to 36 Kg UF UF X more than one passenger.
Suitable for UNIVERSAL baby seat, approved for this weight group U
Suitable for UNIVERSAL baby seat, with front-design approved for this
UF
weight group
Suitable for special baby seats L
Not suitable for this weight group X
UNIVERSAL baby seat is suitable to be installed in all vehicles
* If equipped
40
CHILDREN SAFETY
Position of ISOFIX
Type of fixture Dimension class Weight group
Back central seat Back side seat Front passenger’s seat
2
N X N ISO/L1 F
Child carrier
N X N ISO/L2 G
N X N ISO/R1 E O to 10 Kg
N X N ISO/R1 E
N X N ISO/R2 D O+ to 13 Kg
N X N ISO/R3 C
N X N ISO/R2 D
N X N ISO/R3 C
Group I
N IUF N ISO/R2 B
9 to 18 Kg
N IUF N ISO/F2X B1
N IUF N ISO/F3 A
Explanation :
Suitable for UNIVERSAL baby seat, with front-design approved for this weight group IUF
Suitable for special baby seats equipped with ISOFIX L
Not suitable for this weight group with this ISOFIX position X
ISOFIX fixture is not available for this position N
For more information on dimension class and type of fixtures, refer to baby seat user’s manual
* If equipped
41
CHILDREN SAFETY
Warning
2 - Make sure the appropriate fixture of above hooks to the belt of baby seat located on back niche . Refer to installation manual. Or,
appropriate safety may not be provided in case of any accident.
- ISOFIX fixtures shall be used only when the baby seat is installed on back seat side area, not when it is installed on central back
seat. If the baby seat is installed on back central seat, just fastening passenger’s seat belt is enough for safety.
- Pay attention to different types of fastening upper hook based on different positions of the headrest.
- Baby seats endure for the forces inflicted by the children and for the determined amount of forces, not for adults. Actually adults
who fix their seat belt to the baby board will cause severe risks and dangers in the accidents because of baby seat overload.
- Never make use of audio systems which cause releasing the upper hooks of the baby seat.
- Accidents may cause damages to the vehicle ISOFIX system, damaged ISOFIX systems will not procure enough safety and will
cause severe dangers at the times of accidents. So, ensure the appropriate operation of ISOFIX system as soon as possible, and
make sure that the system is operating mechanically true and plan for periodical checkups for this system.
42
EXTINGUISHER
Notice
To prevent of fire expanding due to air feeding in engine compartment, do not open the hood completely. After release cotter pin
and activation the capsule, open the hood about 10 to 15 cm with discretion and care then simultaneously discharge the mixture in
fire center about 1 to 2 seconds. After that open the hood and completely discharge the capsule in fire center. Pay attention that the
capsule weight is 1 kg and it’s discharge duration is about 7-10 seconds. there fore paying attention during operation is so necessary.
* If equipped
43
EXTINGUISHER
44
MIRRORS
45
MIRRORS
* If equipped
46
MIRRORS
Warning
- Never leave a car in which an infant or pet animal is seated with the switch card in the car. Indeed the infant or the pet animal can
operate the electrical windscreen switch and get caught (by head, arm, hand etc) in the opened windscreen, thereby inflicting heavy
injuries to oneself. In the event the windshield has caught the infant or the pet animal, immediately operate the windscreen in the
reverse direction.
- A power window won’t stop if your fingers, hand(s) or head get in the way. You or others could be seriously injured.
* If equipped
48
WINDOW REGULATORS
Screen Switches
Any passenger can open or close their
side window. Rear windows are not
operable if the driver locks the buttons.
Warning
- Never leave a car in which an infant or pet animal is seated with the switch card in the car. Indeed the infant or the pet animal can
operate the electrical windscreen switch and get caught (by head, arm, hand etc) in the opened windscreen, thereby inflicting heavy
injuries to oneself. In the event the windshield has caught the infant or the pet animal, immediately operate the windscreen in the
reverse direction.
- A power window won’t stop if your fingers, hand(s) or head get in the way. You or others could be seriously injured.
* If equipped
49
WINDOW REGULATORS
Intelligent side windows Anti-Trap safety system* Automatic Order for Movement of
The new intelligent windscreen switch This is a safety system which prevents the the Four Windows
installed in your vehicle is endowed with body parts from getting caught while the This system will provide the option to
an electronic board providing the following windscreen switch is on its upward course. lower or raise the windows, both manually
2 advantages: In this system if the windscreen gets in and automatically for each window.
1- Anti-Trap safety system contact with an obstacle while in its upward In ordinary vehicles only raising of the
2-Automatic closing of glasses after course, it comes to a halt immediately and driver’s window is automatic.
locking the car with a remote control moves in the reverse direction, thus it will Manual mode:
3- Automatic shift command of the four prevent the inflicting of heavy injuries to Press the button of the respective
windscreens the infant. Furthermore, the above system windscreen and press it consecutively. As
4- Slow coming to a halt of the windscreen will insure the longer useful life of the soon as the application of pressure on the
at the end of the course windscreen switches. button ceases, the windscreen will stop.
Automatic Window Closing* Automatic mode:
When the vehicle is turned off and its doors By pressing the button once, the
locked using remote control, this system windscreen will open or close completely.
will check the car windows one by one The new windscreen switches will make you
and raise the windows that are not closed able to open or close manually/ automatically
properly. This security system will take care the four windscreens simultaneously. In
of security risks of forgetting to close all the the event the button is pushed once, the
Warning car windows and will let the driver leave his windscreen will automatically go upward or
Despite the anti pinch safety system, car with peace of mind. downward course.
the electrical windscreen switches If the button is pressed consecutively (for a
can only prevent the inflicting of heavy longer time), the windscreen is operated
injuries caused by the application of Caution in the upward or downward direction till the
the undue force. Always make sure all four windows are pressure exerts on the button; in that case the
Therefore, it is advisable to respect the automatically closed, before leaving movement come to a standstill immediately.
necessary precautions in this regard. car’s parking place.
* If equipped
50
WINDOW REGULATORS
Slow coming to a halt of the Note: This includes the following stages and
windscreen at the end of the course* The intelligent windscreen switch is could be easily done by the owner in the
In this system the pace of the window equipped with a sensor which precisely following manner:
screen will automatically reduce at the registers the windscreen position at any 1- Lower the windscreen to the end of the
end of the course till it stops gradually moment. To distinguish the starting and course.
2
at the end. In this case, there will be no finishing points of the windscreen movement 2- Raise the windscreen manually to the
or less impact on the door. This system domain, the preliminary readjustments of end of the course (In automatic mode, it
eliminates the unpleasant noise arising the windscreen electronic system are made will be deactivated).
from the sudden stoppage of the switch in the factory. If for any reason such the 3- Upon the movement of the windscreen
at its final course and increases the useful opening of the battery leads the permanent to the end of the course, hold the button
life of the internal door parts. energizing of the window switch ceases, just for a second.
(Obviously the anti-Trap system is both the preliminary adjustments are wiped from
operated manually and automatically and the memory and the new abilities of the
in the event the windscreen gets in contact intelligent window switch cease to operate.
with an obstacle while in its upward Following the permanent re-energizing of
course, it comes to a halt immediately and the system, the preliminary readjustments
moves in the reverse direction). and start-up of the windscreen switch have
to be made again.
Note
While adjusting the system, the
anti-Trap system is deactivated.
* If equipped
51
STEERING WHEEL ADJUSTMENT
WARNING
- Never adjust your steering wheel while
2 driving. This is extremely dangerous.
- For safety reasons, only adjust the
steering wheel when the vehicle
stands still.
52
HEATING / VENTILATION
Caution
Heating and Air Conditioning System
-To prevent the probable damage, use the distilled water in radiator.
- To help maintain optimum performance and durability of your air conditioner (even in winter),
it needs to be operated at least once for about 10 minuets each 15 days.
Warning
- It is recommended the A/C system should be turned off before the engine. Do not open the coolant fluid circuit. This
- Only R-134a gas (Eco-friendly and not destroying the ozone layer) is recommended. fluid is dangerous to the eyes and skin.
Otherwise it will damage the A/C system.
* If equipped
53
HEATING / VENTILATION
Temperature adjustment
1. Blue: Cold air
Red: Hot air
2 Air distribution adjustment
2. Center and Side Vents
3. Foot wells
4. Windshield and Side Windows
5. Put the control between 2 and 3 positions
to obtain sufficient air flow for center and
foot wells.
6. Put the control between 2 and 3 positions
in order to obtain enough air flow for center,
foot wells , windscreen and side windows.
* If equipped
54
HEATING / VENTILATION
* If equipped
55
HEATING / VENTILATION
The following procedures will enable you when driving. In some cases opening one of Maximizing cooling and air flow system
to gain maximum benefit from the heating the side windows up to 2 Cm will be useful. - Set the airflow-adjusting key on
and ventilation system. “face ward” position and be sure that the
Maximizing heating system grilles are open.
2 Demisting / Defrosting - Set all air vents towards foot wells. - Slide temperature control lever to the
a) In cold weather and for a better - Slide temperature control lever to the blue section.
defrosting of windows: red section. - Slide blower speed control lever to the
-Select “windshield” on the air control - Slide blower speed control level to the right as needed.
panel right as needed. - Turn on air conditioning.
-Slide the air temperature control to the
RED segment. Defrosting
-Slide the blower switch to maximum.
By doing this you increase the windshield
temperature and prevent the appearance
of fog.
b) When the weather is pleasant but Maximum heating
with high humidity:
- Slide the air temperature control to the
blue segment.
- Select the interior air recirculation.
- Press air condition button.
Maximum airflow and cooling
- Select the minimum level of air blower.
By doing this you increase the windshield
temperature and prevent the appearance
of fog.
Using one of the above methods or a
mixture of the two depends on your comfort
* If equipped
56
INTERIOR EQUIPMENT
* If equipped
57
INTERIOR EQUIPMENT
Warning
- Ashtrays are a fire hazard. DO NOT use for waste paper or other combustibles.
- According to the manometer embedded in the lighters, only the use of the vehicle lighter is allowed, and the consequences of the use of
external electrical instruments is for the vehicle owner.
* If equipped
58
INTERIOR EQUIPMENT
Warning
- The ashtray is at high risk of the fire. Avoid pouring waste paper and flammable materials on it.
- According to the manometer embedded in the lighters, only the use of the vehicle lighter is allowed, and the consequences of the use of
external electrical instruments is for the vehicle owner.
* If equipped
59
INTERIOR EQUIPMENT
Rear armrest* Trunk lid access vent* Adjusting instrument panel dimmer*
Fold down the armrest from the backseat This hatch is located behind the rear The switch is located below the steering
cushion. The armrest provides more armrest, and is used to carry long objects- wheel on the underside of the steering
relaxation and comfort when carrying one such as skis so that a part is situated column cover.
or two rear passengers. Also in case you in the trunk and the prolongation goes Turn the dimmer backward and/or forward
want to access the trunk hatch, fold down through the hatch to the backseats- or to to decrease or increase the lighting of the
the armrest. access the trunk lid through passenger instrument panel.
Two cup holding recesses have been compartment. the heating and ventilation adjusting keys
arranged under the armrest. - Lower the center armrest and release light and cigarette lighter keys light.
the catch at the top of the hatch and lower
to lay completely on top of the armrest.
Warning
Long objects should be carried carefully.
* If equipped
60
INTERIOR EQUIPMENT
Warning
Pay close attention when the car is
running and hot drinks are placed
inside the holder.
* If equipped
61
INTERIOR EQUIPMENT
1- Alarm*
* If equipped
63
ALARM
Audio – video alarm specification Audio-Visual Alarm Specification hour and to cut the beep sound of keypad.
1. Audio and video capability 1. During the course of driving, warning By pressing once again this button the
2. LCD display messages are displayed on the LCD and warning alarm option is turned on.
3. Keypad an audio message is broadcasted through
2 4. Loud speaker speakers according to the type of error. By pressing the button on the main
5. Temperature Sensor 2. This system has tree principal menus menu you can adjust the LCD light from
and eight sub-menus in the settings menu, 0 to 100%
Capability each provided for a specific purpose. The sign appears when air condition
1. Warning messages are displayed on 3. Theft deterrent with 4 digit code and siren. works.
the LCD screen.
2. Vocal warning to notify different messages. Buttons’ Function
3. Theft deterrent with the following Button functions in all menus and
specifications: confirms selected menu and and input
a) 4 digit password possibility data.
b) shock sensor with ability of sensibility Button is used to stop the sound of
adjustment by software audio warning and to exit all menus.
c) Dual position LED memory. By repressing of the button, the
4. Control timer for RLT roof light audio warnings is activated.
5. Measurement of vehicle interior temperature Buttons are used for up and
and their display on LCD down, left and right moving.
6. Equipped with inertia switch for opening Button is used to turn the instrument
the doors in case of accident panel on and off.
7. Possibility of changing the back light by Button is used to cut off the warning
software alarm when speed exceeds 120 KM an
64
ALARM
65
ALARM
66
ALARM
Four digit code: a) If 4 digit code is activated on the intelligent Alarm in normal position
when the vehicle is in theft deterrent mode (menu 3), figure 3 appears, after unlocking When the is not in theft deterrent position,
and unlock (Off) button is pressed: and opening the door, if at the end of the the following capabilities have been
specified time in the code duration setting included to the intelligent:
page, no code is entered or is entered a) When the vehicle is off and driver
2
by mistake, intelligent shifts to alarm and leaves the vehicle and door is closed,
siren and flashers work for 30 s (figure after 5 seconds, the siren triggers 5 times
5). It should be noted that the code can on 200 ms intervals for reminding to lock
be entered three times in a row and if the the vehicle.
code is entered by mistake for the third time b) Doors are opened with button 1 and
(figure 4) shifts to alarm position. closed with button 3 on the intelligent
b) And if 4 digit code is not activated and door keyboard.
is not opened during 10 seconds, the vehicle c) When the speed of vehicle exceeds 20
shifts to lock and theft deterrent position, Km/h, doors will be locked automatically
unless one of the buttons on the key pad is and they will open when the vehicle
pressed or the vehicle is started. isturning off.
67
ALARM
Map reading light timer 6- Keyboard keys (except L) Note: In the event of failure of any one
Map reading light control comes on by 7- Messages display of the keys (side doors, trunk or hood) or
activating intelligent and operates in the shock sensor (if installed on the vehicle)
following situations: Escorting of driver in darkness corresponding entry in the active state
2 1-While the vehicle is off and the vehicle When you’re leaving the vehicle in dark of alarm is not checked and the situation
door or trunk is opened, this light turns on places ,you can keep the space alight for when activating the alarm Gyraz key to
and while the door is closed, the light stays 30 seconds by turning on the small lights activate the remote control with 4 times
on for 12s and then turns off progressively. and low light. For this purpose: flasher and siren* (the distance between
2- When the vehicle is in theft deterrent - Turn off the lights. two consecutive) that is distinct from the
position, by pressing the unlock button, - Keep the switch in Stop position(or take normal warning is given. In this case
light stays on; otherwise, it will be activated out the switch) it is necessary as soon as possible to
by auto-lock and the map reading light - Pull the indicator once towards yourself. overcome the problem by referring to the
will turn off automatically. - Get out of the vehicle and lock it. agency’s action.
3- In the case of danger and alarm, the - small lights and low light will get on
map reading light remains on till the end of automatically after 30 seconds and then will Car finder:
the theft-deterrent alarm position. get off again. While the anti theft system is activated,
4- Should any of the vehicle’s doors (such alarming* system gets activated once and
as trunk lid and engine hood) are open, Automatic lock: the flasher starts blinking for 15 time by
when driving, roof light informs driver by If the theft deterrent is activated, if the pressing the close key on remote control.
blinking. “open” key is pressed on the remote
control, but none of the side doors, hood Note:
How the background light turns door or trunk lid are opened within 12 1- Activation of alarming system ,means it
on and off? seconds, the theft deterrent will lock gets activated just for 0.020 second.
Effective factors influencing on background all side doors, hood door and trunk lid 2- Activation of flasher ,means it gets
light turning on and off are as follow: automatically And the antitheft system will activated just for 400 milliseconds.
1- Alarm Position be activated. After turning the engine on 3- You can disconnect alarming system
2- Anti-Theft Position and speeding up to 10 km/hour, doors will by special switch delivered to you among
3- L key be locked. other keys of the vehicle.
4- Front Light On/Off Position
5- On/Off Position * If equipped
68
ALARM
70
ALARM
The main menu display is according to Distance display screen Kilometers adjustment
(7), we can choose one of the 3 options On this screen the distance is shown in When adjusting oil level, oil filter or air
by pressing the or keys and kilometers (8). Any time the button filter it is possible to enter the maximum
entering the corresponding menu by is pressed, the distance will be reset to 0 amount of proper usage for oil or air filter
pressing .On this page by pressing and it will restart from 0. in kilometers (9).
the key the main menu appears.
To enter adjustment menu, the key Oil filter screen
should be pressed for 1 second. This page is divided into the kilometers
adjustment page and usage.
71
ALARM
To change the kilometer setting, or Driver information display menus: By pressing or buttons choose
should be pressed and then press There are 8 sub-menus in the warning. the desired menu, and then press the
to confirm. By pressing , the message By pressing key on adjustments, the key (12). After termination press the
“should the adjustments be confirmed?” is sub-menu is activated (11). key to exit menu.
displayed (10), and if key is pressed,
the changes will be confirmed and if
key is pressed, the changes will not be
considered.
Usage:
In this menu the usage of oil, filter, air filter
is shown in kilometers. By pressing
key, this page is closed.
72
ALARM
Option Menu1:Temperature setting By pressing the key, you can choose Option Menu 2: Theft-Deterrent
“Internal Temperature” indicates the the automatic or manual positions. (Shock Sensor)
temperature level inside the car. Default position is manual position. AC will Press this button to navigate to option
“Temperature Setting” indicates the level remain on and there will be no control over menu 2. In this menu you can choose the
selected by the user. the temperature. In “Automatic” mode, to sensitivity of the shock sensor (14).
This menu also enables the user to set the “decrease” to the internal temperature set
temperature for AC. by the user, the AC will turn on and off till
Pressing this button will decrease it maintains the selected internal cabin
the temperature setting . temperature. This (AC) can not adjust the
Pressing this button will increase the temperature while the heating is working.
temperature setting. The activation or deactivation of the AC is
Select “Temperature Setting” in Option shown by on or off (13).
Menu1.
Pressing this button allows selection
of Automatic or Manual option and at the
end press button.
73
ALARM
Shock sensor display On the opposite, when the sensitivity is Option menu 3: Security code setting
By pressing and buttons, the near to 0, the alarm will be activated only Press this button to navigate to Option
shock sensor sensitivity can be altered after a heavy shock and if the “shock Menu 3. This menu allows the user to (17):
from 0 to 100 (15&16). When the sensitivity sensors” are placed on 0, the alarm (sire) - Change the 4 digit code number.
is 100, the theft-deterrent will be activated will be totally deactivated. - Reset the time allowed for keying in the 4
even by the smallest shock . Press this button to exit the menu. digit code number. - Activate or deactivate
the 4 digit code number.
74
ALARM
To make any changes in this menu, you must If the correct code is not entered, this If the code is activated (20), you have to
enter the correct 4 digit code number (18). message will be displayed:”Security Code is enter the four digit code number before
incorrect” and the menu will be closed down. starting.
After the correct code has been entered, a If the code is not activated you do not
sub-menu will be appeared. (19) need to enter the four digit code number
By pressing the and buttons you before starting.
can move between different positions.
The default code is 1111 and you can
change it as you wish.
In default mode, the four digit code is
deactivated. If you forget your four digit
code and a problem occurs for the , you
can reset the as mentioned; in this case
the default codes will be1111.
75
ALARM
For- Digit code number changing You will then be able to enter a new 4 digit After entering the four digits, you will be
Pressing this button selects the code number(22). requested to enter the new code number once
option to “Change Security Code”(21). more. If two digits of this entry are the same,
this code number will change to become your
new 4 digit code number. If digits do not match,
the following message will be displayed:”The
security number is incorrect” and no new
security code will be set.
76
ALARM
In this mode a dark line will appear under Option menu 5: Date adjustment By pressing the button the dash sign
the time digit (28). By pressing button enter menu 5(30). will move between year, month and day (31).
In this menu you can choose the day, By pressing the and buttons,
year, month and weekdays options. adjust the date.
If the date is adjusted, weekdays will be
adjusted automatically.
The range of adjustable date is 50 years.
By pressing the button, exit menu.
Press button to exit the menu.
Option Menu 6: Contrast By pressing button the contrast level Option Menu 7: Change of Language
By pressing button enter menu 6(32) will decrease (33). Enter menu 7 by pressing button(34).
In this menu you can adjust the contrast of By pressing button, exit the menu.
the display screen.
By pressing button contrast
percentage goes up.
79
ALARM
In this menu you can change the language Option Menu 8: Default Settings By selecting this option and pressing the
to Farsi, Arabic, English or Russian by Enter menu 8 by pressing button(36). button the message “confirm the
using and buttons (35). changes” appears on the screen (37).
By pressing button all messages, If button is pressed once again, the
commands and voice messages will be changes will be confirmed and if
displayed in the chosen language. button is pressed, changes will not be
Exit menu by pressing button. taken into account. The sensitivity of the
shock sensor and the display contrast will
return to default settings.
The inside temperature control will return
to manual.
80
THEFT DETERENT ALARM
* If equipped
81
THEFT DETERENT ALARM
Notice
-In Case even one of the doors to is
open, theft deterrent alarm will not be
armed. This situation is indicated by
four time blinking of the turning lights
and 4 continuous alarms. *
-When theft deterrent alarm is armed,
it the trunk lid unlock by remote
control, you may open the trunk
lid, take something from it or put
something in it and then close trunk
lid within 30 seconds. If it takes more
than 30 seconds, theft deterrent alarm
starts alarming.
-When theft deterrent alarm is triggered,
you may stop direction lights and alarm
by pushing any of the lock or unlock
keys on the remote control, but this
does not open the vehicle’s doors and/
or disarming theft deterrent alarm.
* If equipped
82
THEFT DETERENT ALARM
83
CNG FUELING SYSTEM
CNG system:
Engine compartment overview *
1. Regulator: Reduces the gas
pressure from a maximum of 200 bar to
2 7bar.
2. Hose (transferring gas to fuel
rail): Transfers the reduced pressure gas
from the regulator to the fuel rail.
3. Fuel Rail: Gas entering the manifold
passes through the fuel rail, and enters
the manifold when the gas injectors open
in the indicated times.
4 & 5. Input/ Output Hot Water
Hoses (Regulator): Transfers the
heater water to the regulator to warm up
and to prevent the regulator from freezing
when operating on gas mode.
6. High Presuure Gas pipe: Transfer
gas from gas trunk to regulator.
7. Electrical Control Unit (ECU):
Adjusts the moment and time length
of injector sprinkling and the timing of
sparking in different engine conditions.
4. Filler:
It is a part installed on the automobile for
fueling the gas tank and it is connected to
the fuel nozzle in the gas station.
85
2
86
3 DRIVING
* If equipped
87
INSTRUMENT PANEL
88
INSTRUMENT PANEL
Engine oil level warning engine or comes on during driving; there and with a “click”, we make sure of its
light - red may be a problem in the battery charge locking. With this action the indicator on
When the starter switch is in second system. Refer to authorized dealer as the panel is turned off.
position, the light comes on briefly, so you soon as possible. If the seat belt is not fastened, this light gets
can check that the light is working. When Following situations causes this warning on along with audio alarming for one minute
the engine is started, the indictor goes out. comes on: the warning light is displayed only. The
In case engine oil level warning lights stays - Fault in battery charge system audio alarming will be heard again, when 3
on and/or comes on during vehicle function, - Fault in battery or its terminals the speed of vehicle exceeds 20 km/h.
it indicates the engine is in critical situation, - Fault in alternator
oil pressure is not enough and/or it is low in - Fault in alternator’s wires Anti – Lock Brake System
lubricating system. Stop immediately, Warning (ABS) – Orange
while observing all safety precautions, and Brake Alarm – Red It lights up when starting the car and keeps
switch engine off. Consult with authorized This indicator is turned on for a few on for a few seconds, and then it turns off. If
dealer before running the vehicle again. seconds while starting the engine and then it it does not turn on when starting the engine
turns off, and it turns on when the hand brake or stays on after the engine starts running,
Cruise-control - Orange* slides up or when the brake fluid level is low. it indicates that there is a problem in the
By turning on or off, this indicator If the indicator of brake system alarm doesn’t anti-lock brake system and or EBD. In such
shows activation or deactivation of the work or remains on while starting the vehicle or a condition move the car immediately and
cruise-control. after sliding down of hand brake, without delay with safety considerations to the authorized
fill the brake liquid reservoir and if the indicator workshop for inspection and repair.
Battery charge warning remains on after filling the reservoir and sliding
light – red down of the hand brake, while considering
When the starter switch is in second safety precautions, transfer the vehicle to an
position, the light comes on briefly, so you authorized workshop for evaluation and repair.
can check that the light is working. When
the engine is started, the indicator goes Driver Safety Belt – Red
out. Should it remains on after starting By locking of the metal tongue of
the driver safety belt in the special buckle * If equipped
91
INDICATORS OF THE INSTRUMENT PANEL
* If equipped
93
INDICATORS OF INSTRUMENT PANEL*
94
INDICATORS OF THE INSTRUMENT PANEL*
Anti – Lock Brake System Warning of driver air bag Service warning light –Orange
Warning (ABS) – Orange defect – orange When this light comes on it means
It lights up when starting the car and keeps The indicator comes on when you start there is a fault in one of the vehicle’s
on for a few seconds, and then it turns off. If the vehicle and blinks on for 6 times and system or periodic maintenance is due.
it does not turn on when starting the engine then should go out. In Case this light When the light on, refer to the nearest
or stays on after the engine starts running, stays on, it indicates there is a fault in center of after sale services.
3 it indicates that there is a problem in the driver air bag system. You should refer to
anti-lock brake system and or EBD. In such authorized dealer as soon as possible, or
a condition move the car immediately and all responsibilities rest on owner.
with safety considerations to the authorized
workshop for inspection and repair. Cruise control - Orange*
By turning on or off, this indicator
Warning of deactivity of the shows activation or deactivation of the
Passenger air bag – orange cruise-control.
If this light comes on it indicate the
passenger air bag is deactive. As long as
the passenger airbag is deactive, the light Immobilizer light – Orange
ins lit. In case the blinking warning light Blinking these lights every 4
comes on, you should contact with one of seconds once after turning off the car,
the authorized Iran Khodro dealer. means that the immobilizer system is
active.
* If equipped
96
DIGITAL DISPLAY SCREEN GUIDE*
* If equipped
99
STARTING / DRIVING
Starting the engine Cold weather - Do not push the gas pedal until the end
1- Check that the hand brake is pulled, In temperatures less than -10ºC, the car at any speed.
and the gearbox is in neutral position. needs more time to start. Since the start - Do not force the engine at any gear level
2- Switch off all unnecessary electrical has to work longer, turn off all unnecessary - If possible do not force the brakes
equipment (including the air conditioner) electric devices when starting. excessively After breaking-in distance is
3- Turn the ignition key to the third position, covered you will be able to use higher engine
3 and release the key immediately when the Warming up the engine speeds gradually.
engine starts. For economizing in fuel consumption,
Do not press the accelerator pedal while move the car immediately after starting,
starting, and do not keep on starting more but remember that pressing heavily on the
than 15 seconds each time. If the engine does gas pedal and forcing the engine before
not start, wait 10 minutes, and then restart. warming time is up can hurt the engine.
100
STARTING / DRIVING
Start switch
Position St
- The switch can be removed
- The steering wheel is locked
- Most lighting is opera tableside lights, headlights and flasher.
3
Position A
- The steering wheel is unlocked.
- Some electrical accessories and equipment operate.
101
MANUAL GEARBOX
102
FUEL ECONOMY& ENVIROMENT
Fuel economy - Press the gas pedal slowly and do not - Use electronic equipment when strictly
You can reduce environmental pollution speed up suddenly.Try to keep a steady necessary.
and drive more safely and economically by speed to reduce not only exhaust pollutants, - Under- inflated or non- standard tires raise
observing following advices: but to prevent mechanical parts erosion. fuel consumption.
- Use the factory recommended gasoline - Pay attention to the maximum allowed speed. - Avoid driving with open windows; it is
and engine oil. - Adjust tires pressure and balance them if preferable to use the ventilation (it raises at
- Prevent gasoline overflow while filling the necessary. least 4% to fuel consumption).
tank. - Minimize using the air conditioner to reduce - Avoid mounting unloaded rack on the
- Do not forget to conduct periodic checks on fuel consumption. vehicle.
your vehicle - If you changed the engine oil by yourself, - Factory unapproved tires can cause
- Check that the exhaust, oil and fuel system do not drain the used oil and deliver it to the increase of mileage.
do not have any leakage. refill oil stations for recycling. - Less inflated tires can cause increase of
- Begin driving slowly and right after turning - Plan your trips, and combine them together. mileage.
on the engine. - Avoid driving in busy streets or rush hours
- Turn off the engine for stops longer than 2 as much as possible.
minutes (i.e in traffic jam or behind red light)
103
STARTING / DRIVING (CNG MODE)
Starting & driving on CNG mode* Fuel Conversion Key* Starting the Engine on CNG Mode*
Changing the type of fuel is done by the fuel The fuel conversion key is on the front console To remind you, this method is used only for
conversion key located on the front console next to the digital clock and it is used from switch special situations like gasoline shortage.
and you can choose the type of fuel as follows: from gasoline to gas and vice versa mode. Firstturned the switch on, and then press the
A. Before moving (at first the car will start By pressing the related key, the fuel type can conversion key for 5 seconds before starting
on gasoline then it will switch to gas) be changed. till the gas warning light appears on the
B. During driving instrument panel. Then start. If there is no
C. Starting the car directly on gas mode** Starting the engine* technical malfunction in the gas system, the
The engine starts on gasoline mode. engine will start on CNG.
Since gasoline pump is turned on, even
Warning when the car runs on gas, and also to cool
While your vehicle engine is running, Caution**
fuel injectors, it is necessary to have at
never park your vehicle in a location This mode should only be used in
least 5 liters of gasoline in the fuel tank. case of emergency such as gasoline
where there are inflammable objects
In the case of any damage to gasoline shortage. In normal conditions, due
and materials in the vicinity of hot
exhaust pipe like dry hay or leaves. system, the engin finally starts on gas mode. to the possible damage to gas fuelled
components, this method is not advised.
* If equipped
104
STARTING / DRIVING (CNG MODE)
Note
In the event the engine REV is higher
than 4000 revolutions per minute and
it is accelerating up at the moment the
conversion button is pressed down,
the LED indicator will start blinking and
the engine will remain on CNG as long
as it has not left the REV domain, after
which it will convert to gasoline.
* If equipped
105
STARTING / DRIVING (CNG MODE)
* If equipped
106
REVERSING LAMP WARNING SYSTEM*
107
FUEL SYSTEM
108
CNG FUELING STEPS*
Direction indicators (left & right) Headlight main / dipped Beams Lighting control switch
Move the lever DOWN to indicate a LEFT Put the lever completely towards the Position 1: lights off.
turn, and UP to indicate a RIGHT turn (the steering wheel to change headlight Position 2: Small lights (front/rear) - Instrument
appropriate GREEN warning light in the beams (BLUE warning light glows when Panel backlight and center console.
instrument panel will flash in time with the the headlights are on main beam) Position 3: Headlights on
direction indicators). To flash headlights, pull the lever part way Day-Time Running Light (DRL)*
In case of 1 strike on left/right direction towards the steering wheel and release. The light is turned on automatically when the
indicator, the indicator is activated and after If the driver decides to change course vehicle is switched on, and activating any
blinking 3 times it is turned off. (Amount of move in lines, just a small move should other lights such as Indicators, Beam Lights
flasher is adjustable with diagnostic device)* be conducted upward /downward on turn or Deep Lights, will be disabled. These lights
Horn signal handle. In this mode, the turn signal are fitted to better view the car in day.
Press the bottom of the direction indicator. acts with more speed and 3 times as a Activation / deactivation of this light must be
warning. carried out by IKCO authorized dealers.
Warning alarm
Warning When the driver exits the car, it warns the
Before driving at night: driver that head lights are on, and it sounds if
Make sure the electrical equipment work flawlessly. Regulate the vehicle lamps the driver and or the passenger door is open
(especially when vehicle is overload). In general, make sure the lamps are uncovered and the switch is off.
(clean from dirt, mud, snow or any other covering object).
* If equipped
110
LAMPS / INDICATORS
Front fog lamps* Rear fog lamps Adjusting the beam of the head
Rotate up one level the center part of the Rotate up two levels the center part of the lights*
stalk to turn on the front fog lights. The stalk to turn on the front fog lights. The This key is used by the driver to adjust the
warning indicator on the instrument panel indicator on the instrument panel lights height of the headlights in different driving
lights up simultaneously when fog lights up when the fog lights are on. The lights conditions and the amount of vehicle
are on. operate if: load. As the car’s load is heavier at the
- small headlights or indicator lights are end of the car, with the choice of a larger
The lights operate only when the small on compensator, the light can be thrown into
headlights or indicator lights are on. - The sidelights and front fog lights are on the desired area.
(if they are installed)
Warning
Fog lights should be used only when the
- fog lamps only used in snow and fog .
visibility area is severely limited since - In clean air or rainy, day or night, do
drivers get dazzled when using fog lights not used the front and rear fog lamp.
in normal conditions. Because of creating glare blinding
causes blurred vision the other
drivers and, increases accident.
* If equipped
111
WINDSCREEN WASHER & WIPER SYSTEM
Caution Caution
- When parking on a steep area move Use the hand brake and turn the
the wheels towards the sidewalk and wheel towards the pavement in slope
pull the handbrake. surfaces.
-While driving, always make sure that When the and STOP icons are 3
the handbrake is completely pulled down lit, it means that the handbrake hasn’t
(Brake Warning Lamp is turned off). been released or is incompletely
Otherwise, the brake pads turn hot. released.
Foot Brake Servo Assistance considering safety precautions bring the car Handbrake
The braking system is servo assisted. to a proper place, and avoid unnecessary Handbrake locks only the rear wheels.
It is activated only when the engine is braking. It finishes the remaining available Pull up the lever to use the handbrake.
running. A greater effort is needed to stop servo-assistance. When parking, the handbrake should
the car without using the servo system, always be completely pulled up (without
and in this situation the vehicle will stop pressing the button on the lever). To
in a longer distance. Always consider the release the handbrake, pull the lever up
following points: slightly, press the button on the brake, and
- Never run on neutral gear or with the Warning fully lower the level. The warning light on
engine turned off If the engine is not running, the brake the instrument panel turns off when the
- Always take care when towing the car servo assistance will not work; more handbrake is completely released.
with the engine turned off. pressure has to be applied on the When parking on a steep road facing
brake pedal. In this case the stopping uphill, use forward gears (i.e. one), and
distance of the car will increase. use reverse gear when facing downhill.
Before moving the car,consider all
necessary precautions.
If the engine goes off while driving,
113
ANTI-LOCK BRAKING (ABS)
114
ANTI-LOCK BRAKING (ABS)
When using a car equipped with anti this situation the car should be directed to ABS system, immediately prevents
lock brake system always consider an authorized workshop with precaution. locking the wheel in sudden braking,
the following points: - If the handbrake is completely released and EBD ensures the optimized braking
- Since the anti lock brake system is only the handbrake indicator and anti distribution on the wheels. When you
for balancing the braking force, therefore lock brake system warning indicator use a car equipped with anti-lock braking
when braking sufficiently press the brake are both lit on the front panel system, consider the following:
pedal and always follow safety guidelines. display, stop the car with precaution and In the case of any problem in EBD 3
-Feeling brake pedal vibrations under the contact an authorized workshop. system, an alarm sign display on panel.
foot while braking over unstable roads or The brake dragging distance will be more
sudden braking is normal and caused by while you’re driving on sloppy surfaces.
the operation of the anti brake system. Make sure of proper functioning of the
- To hear noise when braking over brake after washing the vehicle or while
unstable roads or sudden braking from you’re passing from the puddles.
front and rear wheels is normal and due
to the operation of the anti brake system.
- The anti brake system is equipped Electronic brake force distribution
with an automatic defect finding system system (EBD)*
that will light the anti lock brake system EBD system balances braking forces ratio Caution
warning indicator on the front panel over rear and front wheels, and prevent ABS braking system will function
display in case of a problem. over braking on rear-axis wheels. independently from the pressure
- When the car is turned on, the anti- lock The system provides an optimizing and exerted on the brake pedal. Therefore
brake system warning indicator on an ideal distribution ratio of the brake force in critical situation, it is recommended
the front panel display is on and will turn between rear and front axes, and then can to exert a forceful and steady
off after a few seconds. If the warning provide the best braking force ratio on each pressure on brake pedal. It is to be
indicator does not light when the car wheel to maximize best brake performance. noted that it is not mandatory to exert
is turned on or remains lit, is a sign of Also by using the EBD, the pressure valve subsequent (multiple) pressure on
problem in the anti lock brake system. In of the vehicle will be no longer needed. the brake pedal.
115
AIRBAG *
Air bag safety * glove box and phrase SRS Air bag is printed
Besides the Interjecting safety belt, your vehicle is there to indicate that the vehicle is equipped
equipped with air bag safety as well. with air bag system. Warning
When the ignition switch is placed in the ON the vehicle’s Air bag is designed so that it only Should the air bag light on instrument cluster does
position, the air bag indicator light on the becomes active at time of a severe. not go out after 6 seconds following starting the
instrument panel is turned on and it’s turned The vehicle’s Air bag is designed so that it only engine (this light blinks 6 times in some models),
off after 6 times blinking otherwise, becomes active at time of a severe collision vehicle’s owner should have the air bag system
(as below) suggests a fault in the air bag at front and does not respond at time of inspected by an authorized Iran Khodro dealer
system or safety belt pre-tension which should encountering blows resulting from collisions at as soon as possible, otherwise vehicle’s owner
be referred to the dealer of the car and fix it. the back and sides, overturning of the vehicle shall be responsible for any and all loss due to
Otherwise, the vehicle owner is responsible. or light collisions. In fact this safety system ignorance and delay in referring to an authorized
- Air bag light stay on after blinking 6 times. is designed for protection and safety and dealer.
- When the ignition switch is placed in the ON reducing injury to the driver only when severe
position, the air bag light does not light up and collisions occur. The air bag works only once
does not blink. during a collision and it inflates and deflates
The driver’s air bag is located behind the so fast that you may not even notice it being Note:
steering wheel’s central hatch and the phrase activated. Activation of the air bag will not block To control blinking of the air bag indicator light,
SRS Air bag is printed there to indicate that your view and it is not so stiff that would prevent between any two consecutive time in the ON
the vehicle is equipped with air bag system. your getting out of the vehicle. position, the switch should be placed in OFF
Know that no system can protect passengers position for at least three seconds.
Passenger airbag against all possible injuries in a collision.
It has been located at the right upper part of
* If installed in your car
116
AIRBAG
Warning
- Only belts tightened as much as
possible on the passenger’s body
will have the needed effectiveness.
Depending on the nature and severity 3
of the blow, the interjecting system will
act concurrently with air bags. In case
of non-operation in one of the above
The air bag has maximum protective effect Do not, under any circumstances, lean on situations or defects in the system, the
when the safety belt has kept your body in the steering wheel or the vehicle door. air bag’s warning light will come on.
the proper position. So always adjust the Air Bag Service & Maintenance - For greater safety, always keep the front
seat in the farthermost position possible, If the sir bag is activated once, all its parts seats’ safety belts fastened, for them to
sit with a straight posture and lean on the and fittings should be replaced by an have maximum effectiveness at time of
backrest. authorized Iran Khodro representative, as the air bag system’s performance.
soon as possible. - Never install the protective seat of
To prevent breakdown or untimely activation infants in front passenger seat.
of the air bag, disconnect the battery’s
Because there is a risk of sever injury
electrical cable at least 90 seconds before
Warning or death; if the air bag functions.
performing electrical repairs on the vehicle
Passengers are not in their position, If using of switch is inevitable, inactivate
and turn the start switch to the LOCK position.
very close to the inflating air bag and Dismantling a vehicle, whose air bag the air bag by using the inactivator,
may be damaged. has not been deflated, is dangerous. To located at the lateral section of glove
disconnect the activating fuses of the box. In this case installation lamp of air
interjecting and air bag systems, consult bag gets on.
authorized Iran Khodro representatives.
117
AIRBAG*
Warning
- Any servicing on the passenger security system (pre-tensioner, air bag, electronic control unit,
wiring) or re-use of this system in another vehicle, even if is the same vehicle, is expressly forbidden.
- Use only factory standard steering wheel and never replace it.
3 - Covering of the air bag is expressly forbidden.
- Do not attach anything (clip, logo, watch, mobile stalk, etc.) on the steering wheel air bag.
- No alteration is allowed on the air bag system.
- Opening of the steering wheel is foebidden.
- Have all securing equipments to be inspected after any collision.
Passenger Air Bag Label
- In order to insure proper performance and avoid sudden inflation of the air bag and pre-tensioner
This label is on the side part of the glove
system, only trained personnel of the Iran Khodro dealers are permitted to repair or service the air
box and it means if the air bag arming key
bag and/or pre-tensioner system.
is in ON position, do not install rear facing
- Arming or disarming front passenger air bag should be done only when the vehicle is off *.
child restraint in the front passenger’s
- Do not install rear-facing child restraint system on the front passenger seat when there is a fault
seat.
in function of the air bag arming or disarming switch.*
It is dangerous for passenger sitting on the
- Driving never get your hands on the steering wheel spokes and the central part of the steering
front seat while air bag arming key is in
wheel.
OFF position.
- Do not put your feet on the dashboard above.
Arm the air bag to protect the front
- One of the inevitable consequences of opening air bags, burning skin areas that are exposed to it
passenger as soon as taking out the child
and also sound at the same time and the amount of powder is released that is natural.
restraint from front passenger’s seat.
- Note that the air bag components after opening (action), are hot for a while.
Make sure that the front passenger air
- Air bags, safety belts, crash protection system are complementary. The driver and all passengers
bag’s disarming light on instrument cluster
must be closed at all times your safety belt to the risk of serious injury or death in the event of an
to be off.
accident are minimized.
118
4 VEHICLE MAINTENANCE
* If equipped
119
MAINTENANCE
Weekly checks
- Engine oil level
Warning
- If the vehicle moves at high speed for a long time, check the engine oil’s level
regularly.
- Any sudden or significant decrease in the vehicle’s liquid level or uneven friction of
the tires should be reported to the authorized representative as soon as possible.
120
MAINTENANCE
121
MAINTENANCE
Routine Services
The safety, reliability and performance
of your car is partly dependant on your
maintenance skills, and you should become
ensured that maintenance operations, oil
services, checks, brake fluid and coolant
topping up are carried out in accordance
with the proposed schedules of the
manufacturer if required.
4
122
ENGINE COMPARTMENT
123
ENGINE COMPARTMENT
Warning
- when working on the engine, the
radiator fan’s engine may start working
at any moment, danger of injury
- Adding: when adding oil, take care
that it is not spilt on engine parts since
there may be risk of fire. Do not forget
to close the cap since there will be a 4
danger of fire caused by oil splashing
Engine oil fill Checking oil level on the hot surface of engine parts.
Unscrew the cap, and pour the oil in Check the oil level every week or more - Engine oil replacement : if you
the reservoir. The oil level should never time, when you extremely use the car. change oil when the engine is hot, pay
exceed (Max) marked on the oil dipstick. Check the oil level when the engine is hot, attention that you are not burned by
To check the engine specifications and when the car is standing on a plane level, splashed oil.
required volume, refer to the Maintenance and the oil settles in the reservoir. - Do not turn on the engine in closed
and service Guide. spaces.
Inspection of Engine Oil Level Exhaust fumes are poisonous.
Put the car on a flat surface. Turn the
engine to warm it up. Turn off the engine
and then measure the oil level after 5
Caution
minutes.
Never mix the oil with the added
material, this can cause harm to the
engine very seriously.
125
ENGINE COMPARTMENT
Anti-Freeze
Anti-Freeze contains corrosion inhibitors.
Anti freeze content of the coolant should be
maintained between 40-50%, not only in cold
weather but also all the year.
4
Warning
If any part of the cooling system (apart
Checking the coolant Notice: If more than one liter is needed to top from the radiator) to open or replace the
up, an authorized representative should check air to be re-authorized in accordance
The coolant level should be checked weekly with the instruction performed by repair
the cooling system. Make sure that it is fully
when the cooling system is cold, and the car dungeons.
tightened to the second thread.
resting on a plane level. Liquid level should Avoid opening the radiator cover one hour
In an emergency, and only if the recommended after turning the engine off.
stand between (Max) and (min) signs on anti-freeze is not available use clear water to fill
the vertical wall of the radiator (next to filler the cooling system, but be noted that it reduces
cap). Top up the radiator on necessity. coolant freezing protection. Always use the
antifreezes with recommended formula and
approved brands and packages that are offered Warning
Filling the radiator by ISACO. Anti-freeze solution is poisonous, and
If the engine is warm, wait 15 minutes until the Important note: Cooling system draining and could be fatal if swallowed. Keep it
engine temperature falls below 100 C. Protect refilling are service operations that need sufficient sealed and out of children’s reach. If you
your hands with a cloth and unscrew the filler knowledge, and should be carried out by qualified suspect of drinking it,refer to the physician
cap carefully and slowly to the safety stop, letting personnel according to the instructions of the immediately.
Prevent anti-freeze solution contacting with
radiator pressure fall. maintenance and Service Guide.
the skin and eyes. If you accidentally get it
The coolant resists freezing down to - 30 in your eyes or on your skin, flush the place
degree centigrade. with water and get medical help immediately.
126
ENGINE COMPARTMENT
Brakes
Your car’s most important safety section,
the braking system is equipped with disc Warning
brakes in front and drum brakes in rear, - Brake fluid is highly poisonous, and
and a with dual hydraulic circuit. should be kept out of children reach.
When the engine is running, the brake - Refer to the physician if the fluid
assistance reduces the power needed to swallowed.
press the pedal. - Prevent the fluid contacting the hands
and eyes. If there is a skin contact
Brake fluid rinse immediately with plenty of water. 4
The level of fluid may fall continuously and Rinse and then refer to the physician if
need a top up brake pad wears. If you find Checking the brake fluid contact with your eyes.
any noticeable oil level drop in a few times, Clean the filter cap completely to prevent dirt - Do not let the fluid spill over the warm
refer to the authorized dealer. Do not drive entering the reservoir. Unscrew the cap, and engine since it may cause fire.
if the level falls below the minimum sign in fill up to the mark “ MAX “.
the reservoir. Do not let the fluid level drop below the mark
“ MIN “. Use only fresh seal contained fluid.
(Only fluid from opened container, or fluid
previously bled from the system absorb
moisture, and if you top up them, can Caution
adversely affect the performance). Brake fluid damages the painted
Just use the standard brake oils and surfaces. Soak up spillage with a
approved brands and packages that are clean cloth, and area with water and
offered by ISACO. car shampoo.
127
ENGINE COMPARTMENT
Hydraulic Steering
If the hydraulic steering is correctly operating
there is few or no need to top up the Warning
reservoir. If there is a sudden or continuous Hydraulic fluid is highly poisonous, and
level fall, the car should be checked by an
should be kept out of children reach.
authorized dealer.
Refer to the physician if accidentally
If the fluid falls below the mark minimum,
fill it before starting. swallowed.
Otherwise, the steering pump becomes
damaged.
4 When the level falls below the lower mark,
or the level falls suddenly and rapidly, never
use the lever. However if you find few Checking the Hydraulic Fluid Caution
losses, you can top-up to the upper mark, Clean the filter cap completely to prevent
Brake fluid damages painted surfaces.
and run a short distance to the nearest dirt entering the reservoir. Unscrew the
Soak up any spillage with a clean
authorized wok place. cap; clean the dipstick with a clean and
Check the fluid level every week. lint-free cloth. cloth, and wash the area with water
The engine should become cold and Dip it fully and remove again to check the and car shampoo.
switched off when checking hydraulic fluid level. Top up until the level reaches between
level and front wheels should be straight. the signs minimum and maximum.
Do not overfill the reservoir.
The oil level should be between two lines
max, min.
For information on the advised
specifications of oil, refer to the
Maintenance and Service Guide
In case of hydraulic fluid contact with skin
or eyes, rinse well with plenty of water. Due
to fire hazard, make sure the hydraulic
fluid does not spill on warm engine.
128
ENGINE COMPARTMENT
Replacing battery
Always use batteries of the same type and
Warning of the original specification. Other types
Batteries contain acid, which is may vary in size or terminal positions, which
corrosive and poisonous. Consider the
may have fire danger when connecting to
following points on leakage: If it spills on
your clothes or skin, immediately put off the car electrical system.
the contaminated clothes, and flush the
contacted skin with a lot of water, and
refer to the physician. Caution
-In an eye contact immediately, flush it - Do not charge battery when connected 4
with clean water for at least 15 minutes, to the car. This could seriously damage
and refer to the physician urgently. the electrical system.
Detaching the battery
-It could be fatal to drink battery acid, - It is better to check the distilled
Turn off the alarm before disconnecting water and acid level once a month if
if medical attention is not immediately
taken. the battery, and make sure that the ignition the battery lids are removable. If the
-Working batteries emit explosive switch is off. At first, detach negative cable level is less than recommended, the
gases; keep away fire and sparks from (-) and then the positive (+ )cable. Attach the needed amount should be added.
the engine compartment. positive cable and then the negative cable
-Put off the metal wristbands and on to reconnect the battery. Do not let the
jewelry before working in the engine battery poles have any connection with the Warning
compartment. Never let tools or metal -Do not change the battery suspected
bodywork or metal parts. Unscrew the nuts
object contacting battery poles and of being frozen.
terminals. supporting battery clamps, and then take
-Take sparks and fires away from the
the clamps to remove the battery. When
battery when charging (charged or
replacing fit the battery and its clamps right incharge batteries generate inflammable
in position (the poles towards the engine), hydrogen).
Caution
and then tighten the nuts of the clamps so -After charging the battery and before
If the car stops more than 6 days, it
as to stabilize the battery unit, while avoiding connecting to the car, wait for one hour
should be switch on at least one time so that inflammable gases exit and
over tightening of them.
and for an hour. therefore the risk of ignition is reduced.
129
BATTERY
4
Filling the Windshield Removing Wiper Blades Lift up the wiper arm and turn the blade
Washer Reservoir 1-Detach the sprinkling jet from the wiper so that it makes a 90 degree with the arm.
Every week, check the reservoir liquid level. hose. 2- Press down the trigger tongue.
Fill the reservoir with a mixture of water The nozzle may be of stationary type on
and proper detergent to make sure that the engine cap.*
screen is neatly washed and free of frosts.
Mix the recommended quantities of water
and detergent in a separate container and
fill the reservoir. Always follow the detergent
usage instructions. Caution
Never use the mixture of anti-freeze
and water in the wiper reservoir. It can
damage vehicle color.
* If equipped
131
WINDSCREEN WASHER & WIPER SYSTEM
Caution
- In some systems pressurized water
penetrates in the doors and windows
sealing during washing the vehicle
and causes fault in locks. Never use
pressurized water directly on critical
parts.
4 -In the very cold temperature, make
sure the wiper blades are not frozen
1. Press down the blade so that it detaches (the wiper motor maybe damaged)
the catch, then pull out the blade. -It is a good idea to clean or replace
the wiper blade assembly on a regular
Mounting the Wiper Blades basis when they are worn out or
whenever the efficiency of wipers are
Replace the blades one by one, always reduced.
leave one wiper assembly intact to act as
a guide while replacing the other.
132
HANDLING METHOD IN CASE OF LEAKAGE*
4
Handling method in case of gas In case of leakage and gas odor from the
leakage* trunk or interior, switch to gasoline and
Although numerous safety precautions close the top lid of the container. Contact
have been taken into account within the the authorized workshop to fix defect. Warning
gas system, it is still important to bear in - Any repair work such as changing
mind the following points: or fixing the container’s top valve or
Inspect everyday your car for gas leakage. servicing the regulator should only
- Any gas leakage from high pressure fittings be carried out by skilled personnel
and in the trunk will be conveyed towards approved by the manufacturing
exterior by the flexible ventilation hose. Warning company and within the authorized
- If you park in closed space with no - Any manipulation and fixing of workshop.
ventilation possibility, it is advised to close the gas system by unauthorized - Also since the container and
the valve on top of the container. individuals, would be considered a regulator are traceable components,
breach from the conditions of the therefore any repair or change must
guarantee and repair should only be be duly registered in the associated
carried out by authorized workshops. maintenance identification card.
* If equipped
133
CLEANING & CARING VEHICLE
134
CLEANING & CARING VEHICLE
135
VEHICLE CLEANING & CARE
Removing tar spots - Very mild abrasives to remove surface Mirrors: Wash the mirrors with soapy
Use white spirits to remove the oil and tar contamination without removing or water and use a plastic scraper to defrost
spots stuck to the paint works. Then wash damaging the paint. the mirror surfaces.
the area immediately with soapy water to - Filling compounds that fill or remove
remove all traces of the spirit. scratches on the body works. Note: Avoid using abrasive cleaners or
- Wax to provide a protective coating between metal scrapers.
Body protection the paint work and external particles.
Check the paintwork after you finished Vehicle’s internal package
washing. Paint the area suffered chips Wiper blades Seats, to clean grime from the surface of
4 or scratches using a touch – up pencils. Wash the blades in warm soapy water. Do the seats, use standard cleaning agents.
If the body surface has been uncovered, not use white spirit or oil based detergents. Dashboard, there is no need of a cover to
first use a colored primer and then apply care for the dashboard since it is resistant
the correct color base coat and finish off Windows and mirrors against sunlight, heat and cold.
with a lacquer pencil and polishes. This Regularly clean windows, inner and outer To clean grease marks and other grime
action must be performed after washing sides, with a good quality glass cleaner. from the dashboard, use only standard
and before waxing or polishing. cleaning agents.
Vast damages of the paintwork should Windshield: Clean the windshield with
be repaired in accordance with the menu glass cleaner after washing and polishing
fractures recommendations. Otherwise the car and before fitting new wiper blades.
anti-corrosion guarantee is invalidated.
Contact an Iran Khodro authorized dealer Rear window: Clean the inner side with
for further information. a soft cloth with a left and right movement.
Avoid damaging the heating elements.
Polishing the bodywork Do not clean the window using abrasive
Occasionally treat the paint works detergents, it will damage rear window-
withan approved polish containing the heating elements.
following substances:
136
CLEANING EXTERIOR AND MAINTAINING THE VEHICLE
Qualitative Recommendation for and chemical solvents and also abrasive - It should be smooth to protect the gloss
vehicle washing and corrosive materials such as chrome against scraping and cracking, preferably
1- It is recommended to wash your vehicle polishers. Chrome polishers should be use liquid detergent.
once a week in normal whether. used only on chrome metal plates on the - It should be free from materials which
2- Park your vehicle where direct sunlight aluminum wheels. leave spots on vehicle after being dried.
does not fall on it. 7- Avoid using hot water of more than 60 - It should contain polisher to protect shiny
3- Start vehicle washing at least 30 º’bcC, 4 to 5 bar Max. pressure for washing appearance of the vehicle and be dried
minutes after stopping the engine. vehicle. Distance between nozzle and the rapidly.
4- Do not use sharp-edged and abrasive washing area to be 10 cm. and flushing 9- Do not use automatic carwashes, which
means or cloth since they cause damage angle, which is made between the both use rotary brush, for washing vehicles with 4
to vehicle’s paint. Preferably use plastic sides of the longitudinal axis (along with metallic and two layer painting.
gloves. Use cold or warm water for water output) should be 25 degrees, as 10- Bird droppings, tree sap, etc may
washing. Never use hot water. Use only following figure: damage the finish of your vehicle. Remove
non-abrasive and non-corrosive waxes 8-Suitable detergent for washing vehicle: and wash these types of deposits as soon
and polishers. - Detergent should be low alkaline as possible.
5- Do not stand on doorstep or do not (PH=7-9) 11- In case the water penetrates to the lid
push the roof and body of the vehicle and interior parts of the vehicle, dry is as
during washing/drying. Use only chamois quickly as possible.
or soft cotton cloth to avoid damage to the
vehicle paint.
6- Wash the wheels first since the brake
dusts are very abrasive, then change
water and cloth and wash other parts
of the vehicle from top to bottom. Use a
soft cloth soaked in mild soap solution for
washing aluminum wheels and chrome
metal plates. Do not use strong, acidic
137
VEHICLE CLEANING & CARE
* If equipped
138
VEHICLE CLEANING & CARE
....
Maintenance of the Vehicle’s If possible, when the vehicle is parked, Care Of the Fabric Used in Inside
Natural Leather* leave one of the windows slightly down. Furnishings of the Vehicle*
Natural leather requires care to keep its Prevent direct sunlight on the leather This type of fabric, like any other, requires
beauty and durability. Clean any spots, surface for long periods, as much as care to keep its beauty and durability. For
whether made by foodstuff, alcohol or possible. this reason, any type of stain, whether
liquids, using an absorbent cloth. In case Do not use any types of wax on the leather from foodstuff, alcohol or liquids should
of water being spilt on the leather, do not surface since this will attract dust. be cleaned using a sponge and carpet
use hair dryer or brush to dry it, just let it The leather covers may be cleaned using shampoo. Never use tableware cleaners,
dry naturally. Never use tableware polish, a damp clean cloth. If the leather surface is solvents, soap or polish and especially
solvents and soap or frictional polishes very dirty, you can use a cotton cloth with abrasive cleaners on the fabric. 4
and cleaners on the leather. Just use the suds made by a shampoo solution to
special leather cleaners. These cleaners clean it and then dry it.
will completely clean all spots and grease
Caution
marks without leaving any marks. If as time passes, any signs of attrition
Clean any type of stain on the fabric,
To ensure the cleaning agent does not or discoloration appears, apply to your
using only carpet shampoo and sponge.
have any undesirable effects on the Iran Khodro authorized representative to
leather’s color and appearance, first test rectify it.
it on a parts not in view.
You need to clean the leather surface once
every few months. First dust the leather,
then to clean and protect leather surface,
use leather cleaners and protectors using
a circular motion.
A smell of leather is natural in the first few
months.
* If equipped
139
4
140
5 TECHNICAL EMERGENCIES
141
TIRE CHANGE
142
CHANGING WHEELS
- Use the centralizing tool as a guide to Put the wheel cover in place so as to keep
5 place the wheel. the valve in reach of hand.
- Screw the three other bolts, and tighten Push the edges of the cover to fix it tightly.
Warning
the fillet of the fourth one after removing Put the tools in the box and the wheel in
the wrench. position on the floor, and fasten the strap. After a tire change, always check the air
- Tighten all 4 nuts Repair the punctured tire as soon as pressure and ensure that the wheel nuts
- Lower and remove the jack possible and take it back to its place are tight.
- Tighten all nuts completely in a diagonal - If you have a flat tire, change it as soon
sequence. as possible.
A flat tire should be checked (and if
possible repaired) by an expert.
Caution Park your vehicle on an even, non-slippery
- Slight pressure will cause early wear and tear and un-natural heating up of the
and sturdy surface (i.e. do not park on
tires, and will also have many other repercussions on its safe operation:
ceramic….), (if needed, use a bulkhead
- Weak performance on the road
- Risk of tire blow out or corrosion of the tire thread under the jack shoe) and turn on the
- Tire pressure depends on the vehicle’s weight and speed. Adjust the pressure according to flasher. Pull the hand brake and move the
the conditions of usage. gear from the neutral position. Get all the
- Pay attention, if the tire air throttle cap is destroyed or not tightened properly, it may cause passengers out of the vehicle and take
reduction in the air pressure. Always use a throttle cap similar to the original one and tighten it well. them to a place away from the traffic.
144
CHANGING WHEELS
Puncture
Punctures tire should be taken out and
inspected before patching.
To avoid further possible damages to the
tire, it should be repaired by skilled person.
All repairs should be performed by skilled
persons who undertake full responsibility of
the repair quality.
Tread wear indicator mm, 65 is the ration of the tire height to its
The tires of your vehicle have molded-in width, R indicates radial structure and 15 is 5
tread wear indicators in the grooves. When the diameter of the wheel in inch.
the indicators appear on the tread surface,
the remaining depth of the tread is 1.6 mm or Tire rotations in vehicle
less and the tires should be replaced. Front tires wear more than rear tires due to
braking, driving and steering forces in front Warning
Tires air pressure wheel drive vehicles. So it is recommended -Damaged tires are dangerous. Avoid
Measure the air pressure of the tires at least to rotate tires as follows after each 10000 driving with damaged, worn or over-
once per week, when the tires are cold. Under km. to avoid uneven wear of your tires. inflated tires.
inflation can cause causes heat and reduce -Use always same type radial tires for
the life of the tire. Over inflation can have Tire inspection front and rear wheels. Never use tires with
Drive always while considering the situation of crisscross pattern. Your vehicles wheels are
negative effects on the convenient driving.
not for tubed tires. Do not use tubed tires.
the vehicle’s tires. Inspect regularly the treads
-Never drive with worn, cracked and
Tire size and sidewalls of the tires to find if there is any unadjusted air pressure tires. Under-inflated
Your vehicle tire size is molded on its wall damage (particularly cracks and nodes). tires are worn rapidly, cause increase of
as follows: the fuel consumption and decrease of
185/65 R15, in which 185 is the tire width in steerability.
145
BATTERY CARE & MAINTENANCE
147
BATTERY CARE & MAINTENANCE
Battery care & maintenance Battery safety tips such as battery tablets, battery vitamins and... to
A) Always keep the battery case clean. - Do not bang on the battery poles. the battery’s electrolyte.
B) To prevent the poles from becoming sulfated, - Prevent short-circuiting of the positive and - To prevent risk of short circuits, when installing
negative poles with each other. the battery on the vehicle, first connect the positive
cover them in industrial Vaseline or grease.
- Never charge the battery more than the pole’s cable and then the negative pole’s cable and
C) Electrolyte level in summer, at least every 45
permissible level, since it will damage the when taking the battery out, do this in reverse order
days, and in other seasons should be checked (first the negative cable, then the positive cable).
battery panels and reduce battery performance
once every three months and if the level drops, to - Ensure that the vehicle alternator and current
and life.
recover it by adding only distilled water. Addition - Ensure the holes made on the battery cover regulator are working properly.
of other liquids such as industrial water, sulfuric bolt are open otherwise the battery will explode - Do not add additional electrical equipment
acid and... will inflict irrecoverable damage to the due to the accumulation of gases produced. to the vehicle without considering the battery
battery. If in this case, water evaporation volume - The battery in its place should be tightly capacity.
is more than it should be, the vehicle should installed since strong blows and jolts will - If according to the authorized representative’s
be taken to an authorized representative to be damage it. technical expert’s opinion, the battery has not
5 checked. - Do not keep a charged battery under any been used properly, or propre service and
circumstances since the battery plates will maintenance for it has not been done or battery
In addition, prevent the battery cells from being left
become sulfated and the battery useless. breakdown is due to a long period of inaction
without electrolyte. Since its negative plates will and non-usage, the vehicle battery will not be
- Since producing sparks or bringing flames near
synthesize with the oxygen in the air in a short time eligible under the guarantee.
the battery will cause battery explosion (due to the
and the positive plates will also become sulfated hydrogen and oxygen produced), producing such
and ultimately the battery will become useless. conditions should seriously be refrained from.
- It is recommended not to add any chemical stuff
Warning
- Under normal conditions, batteries emit hydrogen gas that can explode and cause serious injuries. So, the engine compartment keep away from sparks
or flames directly.
- When you work in the vicinity of the moving parts, be careful.
- When it is dark, use flashlights or other lighting device and never use matches or lighters.
- To start the vehicle using battery to battery, be sure to apply mentioned process. Otherwise, it may result in fire, explosion or other damage to the vehicle .
- Over use of the battery causes fire in the vehicle. So, be careful the electrolyte level is not lower than the minimum .
- Keep the battery away from children.
148
TRANSPORTING THE VEHICLE
Warning Warning
- If the engine is off, the hydraulic Steering - Do not take out the start switch or turn it off when the vehicle is being towed on four wheels since
wheel and brake system , do not operate. this will cause the steering wheel to lock. It is recommended to place the switch in the A position.
- The vehicle on tow should be always - We recommend use of a sturdy and fixed bar when towing the vehicle. If using rope or cable
lighter than the towing vehicle. (where it is legal), the towed vehicle should be able to brake (the engine could be turned on).
- The towed vehicle should never have
- Do not tow a vehicle that can not be moved and driven.
any passengers.
- Remember that the brake servo does - To prevent damage to the vehicle, do not brake violently or speed up suddenly.
not operate when the engine is off, and -At any rate it is recommended not to let the speed go over 25 km an hour.
you need much generator force to operate - Do not remove or close the starting switch when towing on four wheels, since it will block the
on the brake pedal. steering wheel. Put the switch in A position.
149
TOWING
Shipping by Carrier
This type of carrying is the recommended
to prevent any accident or damage.
Rear Towing
Avoid suspension towing on front wheels
if possible. If it is necessary, tow it at least
speed and short distances.
The steering should be locked when
the wheels are completely ahead. Use
supporting clamps or catches in addition
to the steering lock.
5
Front Towing
The steering should be locked when
the wheels are completely ahead. Use
supporting clamps or catches in addition
to the steering lock.
Caution
When the car is being towed from
the front and moves on back wheels,
make sure the handbrake operating
on the rear wheels is released.
150
FUSES
Replacing Fuses
1. Turn off the ignition switch and all
electrical equipment.
Fuses
Fuses are simple circuit breakers that protect
electrical equipment being damaged.
Caution
The supporting fuse may be burnt whenever
Any modification or change fuel
electrical equipment does not operate.
feeding systems ( Electronic Control
Unit, Wiring, Fuel Circuit, Injectors,
Protective covers, etc.) due to the
dangers that may threaten you, is
strictly prohibited. (Unless by experts
in After Delivery Service Network).
151
FUSES
F4 5A Beep Sound, Right Indicators & Lamps F19 5A Heater/ Display / Radio/ Switch Lights
F9 5A Left Indicator Lamps, Number Plate Light F24 20 A Wiper Engine/ Wiper Timer / Washer Pump
Radio/ Clock Memory, Water Ampere
F10 30 A Electric Rear Window Regulator F25 5A (Coolant Temperature Unit)
F11 30 A Front Headlights F26 15 A Flashers
F12 5A Reverse Gear Lights, Rear Sensors* F27 30 A Rear Window Heater, Mirror Heater
Instrument Panel Screen/Digital Clock/
F13 20 A Front Fog Tails* F28 10 A Brake Warning Light
F14 30 A - F29 30 A Electrical Front Window Regulator
Door Lights, Courtesy Lights & Electrical Map Reading Light/ Glove Box/ Vanity
F15 15 A Aerial* F30 10 A Mirror/Electric Mirror*
* If equipped
152
FUSES
Owner should not remove or replace fuse connections and all problems should be
checked by qualified technicians.
Fuse specification
Fuse A/F Fuse function
F31 30A Fan 1
F32 30A Fan 2
--- Reserve Spare Fuse
--- Reserve Spare Fuse
F33 Shunt Ignition Switch
F34 Shunt Main Lamp / Dipped Beam
F35 30A ABS
F36 30A ABS 5
Engine Compartment Fuse Box Warning
The fuse box locates in the right of the The electrical system of your vehicle is designed standard or optional equipment.
engine compartment. Consult an authorized dealer before installing other electrical equipment. Some electrical
Detach clamps and remove the cover to accessorier or the way in which they are fitted can have damaging effects on the operation
access the box. Make sure the cover is of your vehicle; the electronic control circuit units, the audio system circuit or the battery
correctly fitted when replacing the cover. changing circuit. Installing electrical equipment should be carried out by an expert.
Caution
When transporting or when the car is not used, to remove the F34,F33 shaunts that
connect the battery to parts consuming electricity, using pliers to avoid discharging
battery. Obviously to resume the car you must replace the shaunt.
153
FUSES
Fuses Fuses
Fuses Fuses function Fuses Fuses function
Ampere Ampere
F1 30 A Wiper motor F11 30A Horn
AC compressor Door feeding node
F2 15A F12 10A
Wiper washer Alarm feeding
F3 30A Double relay 2 F14 10A ECU
F4 30A Double relay 1 Right front fog lamp
F16 15A
F6 30A ABS brake 2 Left front fog lamp
F7 30A ABS brake 1 Left front indicator
F8 30A Fan 1 Left main beam lamps
F17 20A
Right mirror heater Left Night warning lamp
Right front mirror indicator Right dipped head lamps
Right front window regulator Right front indicator
Fuse box of FN* Right front door functioning motor Right main beam lamps
5 The fuse box locates in the right of the F9 20A Right mirror motor
F18 20A
Right Night warning lamp
engine compartment. Right folding mirror Left dipped head lamps
Detach clamps and remove the cover to Right front door light F19 40A Central node feeding 2
Map reading light key F20 50A Start feeding
access the box. Make sure the cover is
Door feeding node F21 60A Central node feeding 1
correctly fitted when replacing the cover. Left mirror heater F22 40A Fan 2
Left front mirror indicator
Vehicle owner must not manipulate the Left front window regulator
Left front door functioning motor
fuses .Any malfunctioning in this part must F10 20A
Left mirror motor
be checked by authorized person. Left folding mirror
Left front door light
Warning Door feeding node
155
FUSES
158
FUSES
*If equipped
159
CHANGING LAMPS
Lamp Watt
1- Headlamp-Main Beam 55
2- Headlamp-Dipped Beam 55
5 8- Reversing Lamps 21
Warning
Check the performance of all external lights before driving. To replace the faulty
lamps, switch off the relevant lamp for preventing short circuit.
* If equipped
160
CHANGING LAMPS
Lamp Watt
1-Headlamp-Main Beam 55
2-Headlamp-Dipped Beam 55
3) Front position light (small)
LED
Day-Time Running Light (DRL)
4- Front Indicator Light LED
161
CHANGING LAMPS
Front Lamp / High beam Front Lamp / Dipped beam Small bulbs*
5 1- Unsrew the cover 1- Unsrew the cover Connector of the small bulbs is located
2- Press the spring clamps inward, and lift 2- Disconnect the connector beneath the high beam lamp, inside the
it up to release. 3- Release the spring clamps. lamp body.
3- Remove the bulb. 4- Without touching the glass bubble and 1- pull out the lamp and its base.
4- Disconnect the connector. with a clean cloth, replace the new bulb 2- Disconnect the base from the bulb.
5- Without touching the glass bubble and in direction of the positioning grooves and 3- Press the new bulb in the base then
with a clean cloth, replace the new bulb and fit the retaining clamp. insert the combination of bulb and base in
in direction of the positioning grooves and 5- Fit the connector at the back of the bulb. its own location.
and fit the retaining clamp. 6- Fit the cover in its place.
6- After inserting the electrical connection,
fit the cover in its place.
Warning
All the bulbs are vacuumed and maybe broken at the time of changing them and
subsequently cause the wound.
* LED lights are not interchangeable.
162
CHANGING LAMPS
Reverse Gear and Rear Fog Side Repeater Lamps Front Direction Indicators**
Lamps* Push the light assembly frontward, and Turn the holder counter clockwise to 5
Unlock the trunk lid, if there is a frame, and pull it out to remove. Hold the light cover become released, and remove it. The holder
push the two plastic jag towards inside carefully and turn the lamp holder. Remove is of a bayonet type. Press it inward then
and remove the holder. the lamp from the holder and replace it. Put turn counter-clockwise to remove. Replace
Lamps have bayonet fittings. Push towards back the holder and turn it to fit. Replace the the bulb.
inside and turn counter clockwise to remove. light assembly.
Replace the lamp and refit the holder.
163
CHANGING LAMPS
Reverse Gear & Rear Fog Lamps* Rear Direction Indicator & Rear Trunk Lid Lamp (Loadspace Light)
5 Unlock the trunk lid, turn the holder counter- Brake Lamps** Insert a screwdriver carefully into the light
clockwise to release and remove it. Lamps From the trunk turn the holder counter- rear slot. You can access the bulb by
have bayonets. Push towards inside and clockwise to release, and then remove. removing the transparent lid. Detach the
turn counter clockwise to remove. Replace Lamps have bayonets. Push towards inside bulb from two connection points. Replace
the lamp and refit the assembly. and turn counter- clockwise to remove. the bulb, and refit the lamp.
Replace the lamp and refit the assembly.
Warning
All the bulbs are vacuumed and maybe
broken at the time of changing them
* If installed in your car and subsequently cause the wound.
** LED lights are not interchangeable.
164
CHANGING LAMPS
High mounted stop lamp Rear direction indicator / Brake Front fog lamp*
Lift the rear part of the light cover, and lamps** You can access the front fog tail through 5
pull it out of the rear shelf. Remove From inside the luggage compartment if beneath part of front set.
the connector. Turn the bulb to reach there is a frame, and press the two plastic 1-Unsrew the cover
the holder four supporting screws. The longues to release and remove the bulb 2-Press in the spring clamps, and lift it up
assembly should be completely replaced. holder. to release and remove the lamp. to release
Refit the new assembly, and reconnect. Lamps have bayonets. Push towards 3-Remove the bulb, and disconnect the
Before fitting the rear clamps, make sure inside and turn counter clockwise to connector
that front clamps are engaged. remove. 4-Fit the connector, and place the new
Replace the lamp and refit the assembly. bulb without touching the bulb glass.
5-Align the bulb and the guide, and place
the spring clamps 6-Refit the cover
6- Screw the cover.
165
CHANGING LAMPS
Warning
All the bulbs are vacuumed and maybe
broken at the time of changing them
and subsequently cause the wound.
* If equipped
166
CHANGING LAMPS
Warning
All the bulbs are vacuumed and maybe
broken at the time of changing them
and subsequently cause the wound.
* If equipped
167
5
168
6 TECHNICAL INFORMATION
169
LABLES & PLATES
170
LABLES & PLATES
171
IDENTIFICATIONS
Identification numbers
It is necessary to announce the corresponding
number (VIN) if you contact to the authorized
dealer regarding the engine or the gearbox.
172
ENGINE TECHNICAL INFORMATION
Number of Cylinders 4 4
Number of Valves 16 8
**In case of using SJ oil or 20W50 SL oil, the change will be at 10000 km.
* If equipped
Note: It’s recommended to use the approved brands and packages, offered
by the Isaco.
174
TECHNICAL INFORMATION
Important note:
Using of all SAE 20 W 50 oils are not allowed in EF7 engines and are not approved.
Hard conditions are as follows:
Towing, Towing of caravan, Carrying load on rack in long distances, Moving in dusty roads, Frequent traversing of short distances (less
than 8 km in every travelling), Traversing of long distances with a monotonous and low speed ,Long period of not using of vehicle.
* If equipped EF7
**It's recommended to use the approved brands and packages, offered by the Isaco.
175
TECHNICAL INFORMATION
GASOLINE CONSUMPTION
ENGINE XU7JPL3 EF7NA CNG base EFP gasoline base
177
WEIGHTS
SAMAND (KG)
Maximum Total Weight; with Passanger and Load 1610 1650 1720
Turning circle 11 m
500 Lit.
Boot volume
* If installed in your car 350 Lit*
179
ANTI POLLUTION
Pollution Control
Your vehicle is equipped with pollution
control.
Catalytic Converter
Catalytic converter or Catalyst is used to
react on exhausting pollutant to produce
least pollution gases. Lead is of the most
important factor in breaking or damaging
catalyst. So it is necessary to use lead
free gasoline.
Caution
6 -Usage of leaded petrol, damages the
vehicle engine.
-Ensure that only standard liquid is
mixed with the fuel.
180
7 INDEX
181
INDEX
182
INDEX
F H L
Filling The Radiator 116 Handbrake 99 Labels & Warning Notes 156,157
Filling The Windshield Washer Handling Method In Case of Gas Leakage Left/Right Side Indicator 79
Reservoir 121 (CNG)* 123 Lighting Control Switch 99
First Aid Kit* 35 Hands Free Mobile* 54 Locking / Unlocking By Key 24
Folding Exterior Mirror (Electrical)* 39 Hazard Warning Triangle 132 Locking/UnlockingByRemoteController 23
Foot Brake Servo Assistance 102 Head lamp main / dipped beam 99 Locking / Unlocking Trunk Lid 24
Front Ash Tray 49 Head Position on Headrest 30
Front Courtesy Light* 48,152 Heating & Ventilation 12,44 M
Front Fog Lamp* 99,150 Horn 99 Maintenance of Vehicle Equipments 128
Front Towing 141 Hydraulic Steering 118 Manual Gearbox 91
Front Towing Ring 140 Map Reading Light* 48-151-152
Front Lamp/High Beam / Dipped Beam 146 I Moving Seat Forward/Backward 29
Fuel Consumption 163 Identification Numbers 158 Mounting Wiper Blades 122
Fuel Conversion Key(CNG)* 93 Instrument panel 81
Fuel Cut-off Switch 97 Intelligent Side Windows Switches 41 O
Fuel Economy & Environment Protection 92 Intelligent Speed Control System* 20,85 Opening The Hood 16
Fuel Filler Cap 97 Interior Air Recirculation 46 Optical Fuses* 142 7
Fuel Filler Flap 97 Owner Care & Maintenance 110
Fuse Box 142 J
Fuses 142 Jack knife Key* 22 P
Jacking 133 Poisonous Fluids 111
G Polishing the Body Work 126
Gear Positions 91 K Positioning the Jack 133
Glove Box 52 Key Set 7,22-23 Power Source Connection 49
Glove Box Opening 52 Precautions While Driving 91
Punctures 135
183
INDEX
Q Screen Switches 40 U
Qualitative Recommendation In Cleaning Seat Belts Safety Tips 31 Unlocking Of The Steering Wheel 90
Vehicle Exterior 127 Shipping By Carrier 141 Unlocking Of The Trunk Lid* 24
Side Windows 40
R Single Movement of Wiper 101 V
Rear Ash Tray* 49 Small Bulbs 147 Vanity Mirror 39
Rear Courtesy Light* 48 Spare Wheel & It’s Tools 132 Vehicle Identification Number (VIN) 158
Rear Fog Lamp 99 Special Conditions 110
Rear Towing 141 SSB Battery 120 W
Rear Towing Ring 140 Starting & Driving By CNG Mode(CNG)* 93 Warning Alarm 99
Rear Screen Heater* 53 Starting The Engine 93 Washing the Wiper Blades 126
Rear Window Locking Switch* 40 Starting The Engine on CNG Washing Vehicle’s Internal Package 126
Rear-View Mirror 38 Mode (CNG)* 93 Wearing Safety Belt 32
Releasing The Safety Belt 32 Sun Visor 50 Weekly Checks 110
Releasing Trunk Lid Lever & Cable* 15 Weights 164
Removing Aluminum Sport Rings* 133 T Windscreen Wiper/Washer 10,101
Removing Tar Spots 126 Technical Information 122
7 Removing The Wheel Cover 133 Technical Information of Engine 159-161
Removing Wiper Blades 121 Temperature Adjustment 45
Replacing Battery 119 Tire Pressure 135
Replacing Fuses 142 Tire Tread Wear Indicator 135
Reverse Alarm System* 93 Tools 132
Routine Services 112 Towing the Vehicle 140
Trunk Lid Access Vent* 51
S Trunk Lid Key Release* 25
Safety In The Garage 111
Safety Tips For Preventing Vehicle Theft 27
184
SAMAND
SAMAND LX
SAMAND LX EF7 BI- FUEL
SAMAND LX EF7 GASOLINE
e-code: 540701E002-36
KM.14 Karaj Makhsous Rd,
Owner’s Manual
9007051052133-36
Shahid Lashgari Highway, Tehran, IRAN
Postal Code : 1389913657
Tel: (+9821) 48901
Fax: (+9821) 44934000-1
SMS Centre: (+98)30003 This manual has been prepared to inform you of how to optimize the use of the
E-mail: info@ikco.ir vehicle and contains important notes on safety, operation and maintenance.
www.ikco.ir Please keep this manual in your car at all times and be diligent in maintaining it.