Professional Documents
Culture Documents
erm “IC:” before the radio certification only signifies that Industry Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à
Canada technical specifications were met. Motorola para reciclagem. Para obter informações sobre como devolver o produto, visite:
This device is approved under the Symbol Technologies brand; Symbol Technologies, http://www.symbol.com/environmental_compliance.
Inc., is the Enterprise Mobility business of Motorola, Inc. (“Motorola”). Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare,
All Symbol devices are designed to be compliant with rules and regulations in locations trebuie returnate la Motorola pentru reciclare. Pentru informaţii despre returnarea produsului,
Marking and European Economic Area (EEA) accesaţi: http://www.symbol.com/weeelink.
they are sold and will be labeled as required.
Bluetooth for use through the EEA have the following restrictions: Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju
Any changes or modifications to Symbol Technologies equipment, not expressly Motorola za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.symbol.com/
STB4208/4278 Cradle approved by Symbol Technologies, could void the user's authority to operate the
equipment.
• Maximum radiated transmit power of 10mW EIRP in the frequency range
2.400-2.4835 GHz
environmental_compliance.
Quick Reference Guide Antennas: use only the supplied or an approved replacement antenna. Unauthorized
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency
range
antennas, modifications, or attachments could cause damage and may violate
regulations. • Italy requires a user license for outside usage.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Statement of Compliance Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on
Radio Modules Symbol Technologies, Inc., hereby, declares that this device is in compliance with the osoitteessa http://www.symbol.com/environmental_compliance.
The STB4278 contains an approved radio module. This module is identified below. essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/ Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till
EEC and 73/23/EEC. Declaration of Conformities may be obtained from Motorola för återvinning. Information om hur du returnerar produkten finns på http://
Symbol Bluetooth™ Radio, Type: LMX5452. www.symbol.com/environmental_compliance.
http://www2.symbol.com/doc/.
Cradle Connections 3. Attach the interface and power cables to the 2. Disconnect the host interface cable from the cradle.
appropriate ports (see Cradle Connections). 3. Wait three seconds.
Important: Connect the interface cable and
power supply (if necessary) in the following 4. Position the mounting template on the 4. Reconnect the host interface cable to the cradle.
order to ensure proper operation of the mounting surface.
Power Port Converter Knob:
scanner and cradle: 5. Reconnect the power supply to the cradle, if required.
5. Using the screw hole notations on the wall Vertical Mount Position
mount template, mark the surface to 6. Reestablish pairing with the cradle by scanning the pairing bar code.
1. Insert the interface cable into the cradle’s
host port. determine the location of the screw holes.
6. Pre-drill holes to accommodate six #8 Pan NOTE The STB4278 does not always require a power supply whereas the
2. Connect the other end of the interface STB4208 always requires a power supply.
cable to the host, if needed. head screws, 5/8" in length.
Host 7. Screw the bracket onto the surface ensuring
3. If necessary, connect the power supply to Port Charging the Scanner Battery in the Cradle
the cradle’s power port (if required by the that the front and bottom screws are
interface, or to allow fast charging of the screwed against the height tabs (see Wall Mount Template). To charge the scanner battery, place the scanner in the cradle (see Inserting the
Scanner in the Cradle). The battery begins charging when the scanner LED indicator Screw Holes
scanner). 8. Press the cables into the cradle cable grooves.
starts flashing green. A complete charge of a fully discharged battery can take up to
4. Connect the appropriate cable to the 9. Align the cradle mounting holes with the screws on the mounting surface and snap three hours using external power and up to five hours using non-external cable power.
power supply and an AC power source, if the cradle securely into place on the surface.
necessary. LED Charging Indications
10. Place the scanner in the cradle.
5. If applicable, thread the interface cable When powered up, the cradle LED is always green. Refer to the LS4278 Quick
over the cable support hook and run the NOTE For your convenience, a mounting bracket can be purchased from Reference Guide for scanner LED indications.
host and power cables into their Motorola. For the appropriate measurements, use the wall mount
respective cable grooves. template included in this guide. Using a Host Interface to Supply Power
6. If necessary, scan the appropriate host Some hosts can provide power to the cradle via the host interface, instead of an
bar code (for non-autodetected
interfaces). Refer to the Product
Inserting the Scanner in the Cradle external power supply.
Reference Guide. To insert the scanner in the cradle:
1. Insert the scanner top first. When the cradle is mounted in a vertical position, ensure
Troubleshooting
the convertable mount hook on the front of the cradle is inserted with the hook facing If the cradle does not work after following the previous procedures:
up. If not, remove and reverse the hook so that it is in position to secure the scanner • Check the system power. Height Tab
in place. • Check for loose cable connections.
• Check that the scanner is inserted properly in the cradle.
• Check that the host settings are correct and the cradle is connected to the appropriate
port on the host.
Dimension Tolerance = ± .02 in (± .5 mm)
CAUTION Do not pour, spray, or spill any liquid on the cradle.
4 5 6 7