Professional Documents
Culture Documents
Page 1
Section KLAUS Multiparking GmbH
Dimensions Hermann-Krum-Straße 2
Car data D-88319 Aitrach
Fon +49 (0 ) 75 65 5 08-0
Page 2 Fax +49 (0 ) 75 65 5 08-88
2000 kg 1 / 2600 kg
Width dim. info@multiparking.com
www.multiparking.com
without door 2
Page 4
80
Approach DB (double platform) = 4 vehicles
Load plan Suitable for
6
Cutting through
Headroom according 12
Page 5
according to clearance and maximal
to local regulations
surface load.
Installation
Electrical
8
Standard Special 3
installation
Delimitation
width 190 cm 4 190 cm 4
weight max. 2000 kg max. 2600 kg
Page 6
100
Technical
data wheel load max. 500 kg max. 650 kg
Clearance profile
Page 7 160 30
To be perfor-
med by the
45
55
customer
Grounding
see table
7
Description
Water drainage 9 10
1-2% 1-2%
15° 13°
6°
100 125
500 (520)
5
5
5
380 (350)
5
360 (340)
350 (335)
330 (325)
320
165
170
170
180
175
185
185
190
195
200
car height car height car height car height car height
height upper lower height upper lower height upper lower height upper lower height upper lower
320 150 150 330 155 155 350 165 165 360 170 170 380 180 180
(325) 150 155 (335) 150 165 (340) 150 170 (350) 150 180
2072i-205 2072i-215 2072i-220 2072i-230
5
5
5
5
420 (370)
430 (375)
450 (385)
400 (360)
205
210
215
220
220
225
230
235
400 190 190 420 200 200 430 205 205 450 215 215
(360) 150 190 (370) 150 200 (375) 150 205 (385) 150 215
Page 3
Width dim. B1 B1 B1 Carriageway in
with door accordance with
Function usable platform width B1 usable platform width B1 usable platform width B1 local regulations
230 260 460 490 230 + 460 750
240 270 470 500 240 + 470 770
Page 4 250 280 480 510 250 + 480 790
Approach 260 290 490 520 250 + 500 810
Load plan 270 300 500 530 270 + 500 830
510 540 270 + 510 840
520 550 270 + 520 850
530 560 270 + 530 860
Page 5 540 570 270 + 540 870
Installation
Electrical
installation
Columns in pit
Single Platform (EB) Double Platform (DB) Single and Double Platform (EB + DB) – Example
Page 6
Technical
data
max.
max.
max.
EB EB DB DB EB DB EB DB
30
30
30
Page 7
max.
max.
max.
140
140
140
To be perfor-
med by the B2 B3 min. 20 B2 B3 min. 20 B2 B3 min. 20
customer
Carriageway in
accordance with
Description
usable platform width B2 B3 usable platform width B2 B3 usable platform width B2 B3 local regulations
230 255 245 460 485 475 230 + 460 745 735
240 265 255 470 495 485 240 + 470 765 755
250 275 265 480 505 495 250 + 480 785 775
260 285 275 490 515 505 250 + 500 805 795
270 295 285 500 525 515 270 + 500 825 815
510 535 525 270 + 510 835 825
520 545 535 270 + 520 845 835
530 555 545 270 + 530 855 845
540 565 555 270 + 540 865 855
EB EB DB DB EB DB EB DB
For parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm
for single platforms and 540 for double platforms. Problems may occur if smaller platform widths are used (depending on
car type, access and individual driving behaviour and capability).
For larger limousines and SUV wider driveways are necessary (in particular on the boxes on the sides due to the missing
manoeuvring radius).
MultiBase 2072i | Code number 587.29.360 | Version 11.2015 Page 3 of 7
Page 1
Garage with door Width dimensions for garage with door
Section
Dimensions
A1 13 Single platform (EB)
Free space for
roller shutter
Car data
Page 2
Width dim. EB EB EB
without door
80
A3 15
Page 3 B7 B7 B7 B8 B8
Width dim. B6 B6 B6
with door
Carriageway in accordance
Height
to door specifications
Function
Headroom according
with local regulations
A2 13
usable platform width door entrance width B6 B7 B8 u
Page 4 230 230 15 30
Approach 240 240 15 30
Load plan 250 250 15 30
260 260 15 30
270 270 15 30
Page 5 Double platform (DB)
Installation
Electrical
installation
DB DB DB
Page 6 Water drainage 14
15
Technical
data
1-2% 1-2%
A3
B7 B7 B7 B8 B8
A3 B6 B6 B6
50
13
For parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm
for single platforms and 540 for double platforms. Problems may occur if smaller platform widths are used (depending on
car type, access and individual driving behaviour and capability).
For larger limousines and SUV wider driveways are necessary (in particular on the boxes on the sides due to the missing
manoeuvring radius).
Function
System lifted System lowered
MultiBase 2072i | Code number 587.29.360 | Version 11.2015 Page 4 of 7
Page 1
Approach
Section
Dimensions
Car data
Page 2
Width dim.
without door
Page 3
Width dim. maximum maximum
with door descending ascending
Function slope 3 % slope 10 %
Page 4
Approach
The illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious
Load plan
maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking
accepts no responsibility.
Load plan
Page 5
Installation
Electrical
installation
F5 F6 F6 F5 F5 F6 F6 F5
F2 F2 F2 F2
Page 6
F3 F4 F4 F3 F3 F4 F4 F3
Technical
data
F6
F4
Page 7
H1
To be perfor-
med by the F5 F1 F1 F1 F1
customer
F3
Description
10
F2 F1 EB DB
Marking 17 Marking 17
290 180
7,5 7,5 7,5 7,5
520 (540) B1 16 B1
10
Page 2
35 10 35 10 35 10 35 10
Width dim.
without door
Free space for vertical pipelines,
ventilation branch canals
30
Page 3
Width dim.
with door Approach level
Function
Page 4 20 20
Approach
Load plan
EB EB DB DB
Installation
Electrical
installation
Technical
data
B2 19 B3 19 B2
Page 7 ≥20 ≥20
To be perfor-
med by the
Free space only applicable if vehicle is parked forwards = FRONT FIRST and driver’s door on the left side.
customer
Description
Electrical installation
Installation diagram Electrical data (to be performed by the customer)
1 No. Menge Description Position Frequency
1 1 Electricity meter in the supply
2 line
3 2 1 Main fuse:
3 x fuse 16 A (slow)) in the supply 1 per
or circuit breaker 3 x 16 A line 3,0 kW
4 (trigger characteristic K or C) unit
8 3 x fuse 20 A (slow)) in the supply 1 per
12 or circuit breaker 3 x 20 A line 5,2 kW
5 (trigger characteristic K or C) unit
13 Conduit EN 25 (M25) 3 1 Supply line 5 x 2,5 mm2 to main switch 1 per unit
(3 PH + N + PE) with marked wire
height: + 1.70 m and protective conductor
11
180
would you please contact us. annotation 4, KLAUS Multiparkers are part of the building services
Units (garage systems).
Page 3
Width dim. Low-noise power units mounted to rubber-bonded-to metal Normal sound insulation:
with door mountings are installed. Nevertheless we recommend that
Function parking system’s garage be built separately from the dwelling. DIN 4109, para. 4, Sound insulation against noises from building
services.
Available documents
Table 4 in para. 4.1 contains the permissible sound level values
Page 4 – wall recess plans emitted from building services for personal living and working
Approach – maintenance offer/contract areas. According to line 2 the maximum sound level in personal
Load plan – declaration of conformity living andworking areas must not exceed 30 dB (A).
– test sheet on airborne and slid-borne sound Noises created by users are not subject to the requirements
Environmental conditions (see table 4 , DIN 4109).
Page 5
Environmental conditions for the area of multiparking systems: The following measures are to be taken to comply with this value:
Installation
Electrical Temperature range –10 to +40° C. Relative humidity 50% at a – Sound protection package according to offer/order
installation maximum outside temperature of +40° C. (KLAUS Multiparking GmbH)
If lifting or lowering times are specified, they refer to an – Minimum sound insulation of building R’w = 57 dB
environmental temperature of +10° C and with the system set (to be provided by customer)
Page 6
up directly next to the hydraulic unit. At lower temperatures or
Technical
data
with longer hydraulic lines, these times increase. Increased sound insulation (special agreement):
Building application documents Draft DIN 4109-10, Information on planning and execution,
proposals for increased sound insulation.
According to LBO and GaVo (garage regulations) the Multiparking
Page 7 systems are subject to approval. We will provide the required Agreement: Maximum sound level in personal living and working
To be perfor- building application documents. areas 25 dB (A). Noises created by users are not subject to the
med by the
requirements (see table 4, DIN 4109).
customer
Care
Description The following measures are to be taken to comply with this value:
To avoid damages resulting from corrosion, make sure to follow
our cleaning and care instructions and to provide good ventilation – Sound protection package according to offer/order
of your garage. (KLAUS Multiparking GmbH)
– Minimum sound insulation of building R’w = 62 dB
Corrosion protection (to be provided by customer)
See separate sheet regarding corrosion protection.
Note: User noises are noises created by individual users in our
Railings Multiparking systems. These can be noises from accessing the
If the permissible drop opening is exceeded, railings are to be platforms, slamming of vehicle doors, motor and brake noises.
mounted on the systems. If there are traffic routes next to or
behind the installations, railings compliant to DIN EN ISO 13857
must be installed by the customer. Railings must also be in place
during construction.
MultiBase 2072i | Code number 587.29.360 | Version 11.2015 Page 7 of 7
Page 1
To be performed by the customer
Section
Dimensions Safety fences Wall cuttings
Any constraints that may be necessary according to DIN EN ISO Any necessary wall cuttings according to page 1.
Car data
13857 in order to provide protection for the park pits for pathways
Electrical supply to the main switch / Foundation earth connector
Page 2 directly in front, next to or behind the unit. This is also valid during
Width dim. construction. Railings for the system are included in the series Suitable electrical supply to the main switch and the control wire
without door
delivery when necessary. line must be provided by the customer during installation. The
functionality can be monitored on site by our fitters together with
Numbering of parking spaces the electrician. If this cannot be done during installation for some
Page 3 Consecutive numbering of parking spaces. reason for which the customer is responsible, the customer must
Width dim. commission an electrician at their own expense and risk.
with door Building services In accordance with DIN EN 60204 (Safety of Machinery. Electrical
Any required lighting, ventilation, fire extinguishing and fire alarm
Function
Equipment), grounding of the steel structure is necessary, provided
systems as well as clarification and compliance with the relevant by the customer (distance between grounding max. 10 m).
Page 4 regulatory requirements. Operating device
Approach
Drainage Cable conduits and recesses for operating device (for double wing
Load plan
doors: please contact the local agency of KLAUS Multiparking).
For the front area of the pit we recommend a drainage channel,
which you connect to a floor drain system or sump (50 x 50 x 20 cm). Operating device exposed Operating device concealed
The drainage channel may be inclined to the side, however not the 120 above
Page 5
pit floor itself (longitudinal incline is available). For reasons of 110 above
Installation carriageway carriageway
Electrical
environmental protection we recommend to paint the pit floor, and level level
installation to provide oil and petrol separators in the connections to the public
15
sewage network.
= = = =
7
Page 6 Strip footings
Technical
If due to structural conditions strip footings must be effected, the
20
data
customer shall provide an accessible platform reaching to the top
of the said strip footings to enable and facilitate themounting work.
Conduit EN 25 (M25) 9 9
9
Page 7 Marking
To be perfor- According to DIN EN 14010, a warning that identifies this If the following are not included in the quotation, they will
med by the danger area must be placed in the entrance area that conforms also have to be provided / paid for by the customer:
customer
to ISO 3864. This must be done according to EN 92/58/EWG
Description
for systems with a pit (platforms within the pit) 10 cm from the – Mounting of contactor and terminal box to the wall valve,
edge of the pit. complete wiring of all elements in accordance with the circuit
diagram
– Costs for final technical approval by an authorized body
– Main switch
– Control line from main switch to hydraulic unit