Examples of Data Formats
From the Help menu, select List of available formats to view a list of
Petrel supported data formats.
rea es aaah
waa saa cuten ian oi
Dae == Snub
20 in aeRO, (bom ee amare
or
Vai - Mal bocDET 5 ae
viets-Deatay | WARIGoI ASIN Wain sad vw
-
Wells ~ Logs Well logs (ASCII) Well trace ‘One for each log loaded
— =e ait cbs
displayed
Wee Data reparation 7 Fal FundamLesson 2 — Data Import and Export
There are two options for data import in Petrel. Petrel differentiates
between Import file (on the File menu and on the toolbar) and Import
(on selection), located on the Insert menu and on the right-click menu
of folders in the Petrel Explorer panes
Using Import (on selection), imported data are inserted directly into
the active folder and, therefore, only formats that can be held in the
active folder are available.
If you use Import file, the data are imported and placed at the bottom
of the Input pane, not inside a folder.
Procedure — Importing with a Predefined Format
1. Find the data to import, choose the appropriate format, and
click Open.
2. Specify the template (such as Elevation Time or Thickness
depth).
Feel Fundamentals
Data Preparation °73Que
negative Z-valvs.
3. Click OK for all if all the files have the same format or click
OK if they have different formats.
Select Files to Import
A dialog box opens after selecting Import file. In this dialog, choose
‘the data to be imported and the correct format. Note that, depending on
the format you select, a corresponding illustration of the format
displays at the bottom of the dialog as an example.
The available formats are limited to those appropriate for the data
stored in the folder type. (For example, you cannot import a SEG-Y file
into the Wells folder.)
Input Data Dialog Box
In the Input data dialog box, you specify the template (such as, Type of
data being imported). The template must match the type of data you are
loading. The template of an object defines its unit and color table.
‘Templates can be created or edited in the Templates pane.
For example, the file being imported is named Tarbert-1 and it contains
isochore data, as indicated by the X, Y, and Z ranges shown in the Data
range section. As a result, you choose the Thickness depth template
14+ Data Preparation
Pal Fda