Professional Documents
Culture Documents
REINFORCED CONCRETE
Project Spreadsheets to BS 8110 COUNCIL ENTER DATA IN BLUE CELLS ONLY.
Client Advisory Group Made by Date Page RED MESSAGES INDICATE ENTRY ERRORS.
Location Edge Column B1 (akin to D&D) rmw 28-Nov-08 85 MAGENTA INDICATES DATA FROM OTHER SHEETS.
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES
TO BS 8110:1997 Checked Revision Job No … See CDES!
Originated from RCC51.xls on CD © 1999 BCA for RCC chg - R68
INPUT 1-2
Location Edge Column B1 (akin to D&D) y concrete density, kN/m3 24.0
yfgk 1.40
Orientation A-B x x B-C H yfqk 1.60
y
n/a
Level 7 6 5 4 3 2 1 0
Loads (characteristic uno)
Slab (inc swt.) gk kN/m2 5.00 5.00 5.00 5.00 5.00 5.00 5.00 swt = self weight
qk kN/m2 4.00 4.00 4.00 4.00 4.00 4.00 4.00 gk = characteristic Dead load
qk = characteristic Imposed load
Beams (swt.) gk kN/m included included included included included included included included included included
line loads (-extra over slab loads and beam self weight) For partitions, cladding etc
A-B gk kN/m 5.0 5.0 5.0 5.0 5.0 5.0 5.0
qk kN/m 0.0
B-C gk kN/m 5.0 5.0 5.0 5.0 5.0 5.0 5.0
qk kN/m 0.0
1-2 gk kN/m 0.0
qk kN/m 0.0
n/a gk kN/m 0.0
qk kN/m 0.0
At column position, other applied loads (eg loads from cantilevers) eg loads from roof structures
Gk kN (char) 0.0
Qk kN (char) 0.0
Mxx kNm (ult) 0.0
Myy kNm (ult) 0.0
x mm
Moment, M 109.0 kNm fy 460 N/mm² other sheets - unless overwritten
about X-X axis fyv 460 N/mm² o
Height, h (ll to yy, L'r to xx) 300 mm γm 1.05 steel o As from M M = 0.67fcu.b.dc(h/2 - dc/2)/gm + (Asc/2).(h/2-d').(fsc+fst)
ignoring side bars
0.4
Breadth, b (ll to xx) 300 mm γm 1.5 concrete Recommended link size = 10 mm M - 0.67fcu.b.dc(h/2 - dc/2)/gm = (Asc/2).(h/2-d').(fsc+fst)
Max bar diameter 40 mm Link Ø 10 mm o {M - 0.67fcu.b.dc(h/2 - dc/2)}/[(h/2-d').(fsc+fst).gm] = Asc/2 = As
0.2
cover (to link) 30 mm o As = {M - 0.67fcu.b.dc(h/2 - dc/2)}/[(h/2-d').(fsc+fst).gm]
CALCULATIONS o 0.0
from M As = {M - 0.67fcu.b.dc(h/2 - dc/2)}/[(h/2-d').(fsc+fst).gm] o As from N N = 0.67fcu.b.dc/gm + fsc.Asc - fstAst C C C C C C C C C C C C C C C C C C C C
ol ol ol ol ol ol ol ol ol ol ol ol ol ol ol ol ol ol ol ol
from N As = (N - 0.67fcu.b.dc/gm) / (fsc - fst) As = Ast = Asc: dc=min(h,0.9x) o (N - 0.67fcu.b.dc)/gm = fsc.Asc - fstAst
u u u u u u u u u u u u u u u u u u u u
d' = 60 mm .67fcu/gm = 15.6 N/mm² o As = (N - 0.67fcu.b.dc) / [(fsc - fst).gm]
d= 240 mm fy/gm = 438.1 N/mm² Asc = Ast = As: dc=min(h,0.9x) As mm2 (half of total requirement)
critical about X-X axis:…... h= 300 mm
b= 340 mm The one unknown is x, depth to neutral axis, therefore iterate for solution satisfying above equations Row 27
from iteration, neutral axis depth, x, = 253.6 mm In this case, column is critical about X-X: h= h and b = b in above formulae
dc 228.2 mm
0.67.fcu.b.dc/gm 1070.3 kN h= 300 b= 300
Steel comp strain 0.00267
Steel tens strain -0.00019 Iterating x to find where Nx=N based on reinforcemeent required for M with assumed x ignoring any side bars
Steel stress in comp. face, fsc 438 N/mm2 (Comp. stress in reinf.)
Steel stress in tensile face, fst -37 N/mm2 (Tensile stress in reinf.) Try value of x, mm 60 120 240 480 360 240.0 300.0 270.0 240.0 255.0 247.5 255.0 251.3 255.0 253.1 255.00 254.06 253.59 253.36 253.48 253.54 253.56
from M, As = 1958 mm2 Bresaler's load contour check not done dc 54 108 216 300 300 216 270 243 216 229.5 222.75 229.5 226.13 229.5 227.81 229.5 228.66 228.23 228.02 228.13 228.18 228.21
from N, As = 1957 mm2 OK 0.67.fcu.b.dc/gm 253 507 1013 1407 1407 1013 1266 1140 1013 1076 1045 1076 1061 1076 1068 1076 1072 1070 1069 1070 1070 1070
Steel comp strain 0.00000 0.00175 0.00263 0.00306 0.00292 0.00263 0.00280 0.00272 0.00263 0.00268 0.00265 0.00268 0.00266 0.00268 0.00267 0.00268 0.00267 0.00267 0.00267 0.00267 0.00267 0.00267
As req'd = 1957mm² T&B:- PROVIDE 4T40 Steel tens strain 0.01050 0.00350 0.00000 -0.00175 -0.00117 0.00000 -0.00070 -0.00039 0.00000 -0.00021 -0.00011 -0.00021 -0.00016 -0.00021 -0.00018 -0.00021 -0.00019 -0.00019 -0.00018 -0.00019 -0.00019 -0.00019
(ie 2T40 T&B - 2514mm²T&B) - 5.59% o/a - @180 cc.) Steel comp stress 0 350 438 438 438 438 438 438 438 438 438 438 438 438 438 438 438 438 438 438 438 438
Links : - PROVIDE T10 @ 300 Steel tens stress 438 438 0 -350 -233 0 -140 -78 0 -41 -21 -41 -31 -41 -36 -41 -39 -38 -37 -37 -37 -37
. As from M 1975 851 1686 13750 5916 1686 3355 2360 1686 1990 1830 1990 1908 1990 1948 1990 1969 1958 1953 1956 1957 1958
OK As from N -3989 -16964 2255 754 885 2255 1271 1670 2255 1929 2082 1929 2003 1929 1966 1929 1947 1957 1961 1959 1958 1957
Strain diagram Stress diagram Nx using As from N -611.90 431.52 1751.57 ### 5378.86 1751.57 3206.04 2357.18 1751.57 2029.91 1885.27 2029.91 1956.14 2029.91 1992.65 2029.91 2011.19 2001.90 1997.27 1999.58 2000.74 2001.32
328.074 341.775 15.6 N/mm² Nx > N? (Y=1,N=0) 0 0 0 1 1 0 1 1 0 1 0 1 0 1 0 1 1 1 0 0 0 1
323.400 Y's to date 0 0 0 1 2 2 3 4 4 5 5 5 5 5 5 5 5 5 5 5 5 6
287.065
305.025
246.056 286.650 next increment 60 120 240 -120 -120 60 -30 -30 15 -7.5 7.5 -3.75 3.75 -1.875 1.875 -0.938 -0.469 -0.234 0.117 0.059 0.029 -0.015
about X-X axis
205.046 268.275 Additional term to ensure correct range of x considered
249.900
164.037
231.525
123.028 213.150
Summary Graph of strains
82.019 194.775 Req'd 3915 mm2 x 0 0 60 240 300 300 0 60 60 240 240
41.009 176.400 min 0.4% 360 mm2 plot x 50 50 110 290 350 350 50 110 110 290 290
158.025
0.000 Notes Total = 3915 mm2 Strain 0 -0.00064 0.00019 0.00267 0.00350 0
139.650
C C C C C C C C C C C C ie 1.56 T40 T&B Steel strain 0 0.00019 0 0.00267
121.275 Stresses in N/mm2
olu olu olu olu olu olu olu olu olu olu olu olu
mn mn mn mn mn mn mn mn mn mn mn mn 0.0 25.0 50.0 75.0 100.0 125.0
Compression +ve 150.0 175.0 ie use 2 T40 T&B 2T40 2514 mm² 5.59 % Steel strain 0.00019 0.00267
Z AA AB AC AD AE AF AG AH AI AJ AK
ie 4 T40 in all 4T40 5027 mm² 5.59 % Concrete strain 0.00350 0.00350 -0.00064
……up to 2% shortfall in area - say ok Concrete strain -0.00350 0.00064
Checks Max Min Baseline 50 350 Neutral axis 96.4 96.436
centres of bars 180 mm 340 105 0 0 -0.00064 0.00350
Graph of stresses
max centres
ok=1 1 Conc stress 0.0 156.3 156.3 0.0
min centres ok=1 1 350.0 350.0 121.8 121.8 0
Astot<0? ok=1 1 Steel stresses 0.0 438.1 0.0 37.4
Astot<0.4% ok=1 1 290.0 290.0 110.0 110.0
Astot>6.0% ok=1 1 Neutral axis 96.4 96.4
Areas within 2.5% ok=1 1 0.0 438.1
T10 @ 300
provide T10 @ 300 in 2 legs
Project Spreadsheets to BS 8110
Location
Edge Column B1 (akin to D&D) LOAD TAKE DOWN CALCULATIONS I Made by rmw Job No R68
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 28-Nov-08
Originated from RCC51.xls on CD © 1999 BCA for RCC
Location Edge Column B1 (akin to D&D) Column loads - loads from slabs (including self weight) Location Edge Column B1 (akin to D&D)
Column loads - loads from slabs (including self weight)
7 6 5 4 3 2 1 0
A-B Gk kN =0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN 0
=0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
B-C Gk kN 0
= = 0.5x(0.0+0.0)/2*0.0/2*0.0 = 0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
1-2 Gk kN =(5.0+5.0)/2*8.0/2*5.0 =(5.0+5.0)/2*8.0/2*5.0 =(5.0+5.0)/2*8.0/2*5.0 =(5.0+5.0)/2*8.0/2*5.0 =(5.0+5.0)/2*8.0/2*5.0 =(5.0+5.0)/2*8.0/2*5.0 =(5.0+5.0)/2*8.0/2*5.0 0
=0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN =(5.0+5.0)/2*8.0/2*4.0 =(5.0+5.0)/2*8.0/2*4.0 =(5.0+5.0)/2*8.0/2*4.0 =(5.0+5.0)/2*8.0/2*4.0 =(5.0+5.0)/2*8.0/2*4.0 =(5.0+5.0)/2*8.0/2*4.0 =(5.0+5.0)/2*8.0/2*4.0 0
=0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
n/a Gk kN =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 0
=0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 0
=0.5x(0.0+0.0)/2*0.0/2*0. =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
0
ie
A-B Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 100.0 100.0 100.0 100.0 100.0 100.0 100.0 0.0 0.0 0.0
Qk kN 80.0 80.0 80.0 80.0 80.0 80.0 80.0 0.0 0.0 0.0
n/a Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Column loads - loads from beam line loads Column loads - loads from
beam line loads
7 6 5 4 3 2 1 0
A-B Gk kN = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
B-C Gk kN = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
1-2 Gk kN = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 8.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
n/a Gk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
ie
A-B Gk kN 12.5 12.5 12.5 12.5 12.5 12.5 12.5 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 12.5 12.5 12.5 12.5 12.5 12.5 12.5 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
n/a Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ie
A-B gk kN/m 1.26 1.26 1.26 1.26 1.26 1.26 1.26 0 0 0
Gk kN 3.2 3.2 3.2 3.2 3.2 3.2 3.2 0.0 0.0 0.0
B-C gk kN/m 1.26 1.26 1.26 1.26 1.26 1.26 1.26 0 0 0
Gk kN 3.2 3.2 3.2 3.2 3.2 3.2 3.2 0.0 0.0 0.0
1-2 gk kN/m 2.34 2.34 2.34 2.34 2.34 2.34 2.34 0 0 0
Gk kN 9.4 9.4 9.4 9.4 9.4 9.4 9.4 0.0 0.0 0.0
n/a gk kN 0 0 0 0 0 0 0 0 0 0
Gk kN/m 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
10695684.xls 11/28/200803:42:23 p4
Project Spreadsheets to BS 8110
Location
Edge Column B1 (akin to D&D) LOAD TAKE DOWN CALCULATIONS II sheet 2 of 2 Made by rmw Job No R68
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 28-Nov-08
© 1999 BCA for RCC
TOTAL LOADS Location Edge Column B1 (akin to D&D) TOTAL LOADS Location Edge Column B1 (akin to D&D)
7 6 5 4 3 2 1 0
A-B Gk kN = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
B-C Gk kN = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +12.5 +3.1 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
1-2 Gk kN = 100.0 +0.0 +9.4 = 100.0 +0.0 +9.4 = 100.0 +0.0 +9.4 = 100.0 +0.0 +9.4 = 100.0 +0.0 +9.4 = 100.0 +0.0 +9.4 = 100.0 +0.0 +9.4 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 80.0 +0.0 = 80.0 +0.0 = 80.0 +0.0 = 80.0 +0.0 = 80.0 +0.0 = 80.0 +0.0 = 80.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
n/a Gk kN = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
ie A-B Gk kN 15.7 15.7 15.7 15.7 15.7 15.7 15.7 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 15.7 15.7 15.7 15.7 15.7 15.7 15.7 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 109.4 109.4 109.4 109.4 109.4 109.4 109.4 0.0 0.0 0.0
Qk kN 80.0 80.0 80.0 80.0 80.0 80.0 80.0 0.0 0.0 0.0
n/a Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
A-B (about yy) Gk kNm 19.6 19.6 19.6 19.6 19.6 19.6 19.6 0.0 0.0 0.0
N kNm 27.4 27.4 27.4 27.4 27.4 27.4 27.4 0.0 0.0 0.0
B-C (about yy) Gk kNm 19.6 19.6 19.6 19.6 19.6 19.6 19.6 0.0 0.0 0.0
N kNm 27.4 27.4 27.4 27.4 27.4 27.4 27.4 0.0 0.0 0.0
1-2 (about xx) Gk kNm 218.7 218.7 218.7 218.7 218.7 218.7 218.7 0.0 0.0 0.0
N kNm 562.2 562.2 562.2 562.2 562.2 562.2 562.2 0.0 0.0 0.0
n/a (about xx) Gk kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
N kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
FEMxx about x-x kNm MAX[abs(562.2- MAX[abs(562.2- MAX[abs(562.2- MAX[abs(562.2- MAX[abs(562.2- MAX[abs(562.2- MAX[abs(562.2- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0-
0.0),abs(0.0-218.7)] 0.0),abs(0.0-218.7)] 0.0),abs(0.0-218.7)] 0.0),abs(0.0-218.7)] 0.0),abs(0.0-218.7)] 0.0),abs(0.0-218.7)] 0.0),abs(0.0-218.7)] 0.0)] 0.0)] 0.0)]
FEMyy about y-y kNm MAX[abs(27.4- MAX[abs(27.4- MAX[abs(27.4- MAX[abs(27.4- MAX[abs(27.4- MAX[abs(27.4- MAX[abs(27.4- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0-
19.6),abs(27.4-19.6)] 19.6),abs(27.4-19.6)] 19.6),abs(27.4-19.6)] 19.6),abs(27.4-19.6)] 19.6),abs(27.4-19.6)] 19.6),abs(27.4-19.6)] 19.6),abs(27.4-19.6)] 0.0)] 0.0)] 0.0)]
FEMxx about x-x kNm 562.2 562.2 562.2 562.2 562.2 562.2 562.2 0.0 0.0 0.0
FEMyy about y-y kNm 7.8 7.8 7.8 7.8 7.8 7.8 7.8 0.0 0.0 0.0
Moments in column
Moments in column
Mxx col above kNm 562.2*0/(0+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
about x-xcol below kNm 562.2*17/(0+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 562.2*17/(17+17+54+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
Mxx col above kNm 0.0 108.6 108.6 108.6 108.6 108.6 108.6 0.0 0.0 0.0
about x-xcol below kNm 134.6 108.6 108.6 108.6 108.6 108.6 108.6 0.0 0.0 0.0
Myy col above kNm 7.8*0/(0+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
about y-ycol below kNm 7.8*17/(0+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 7.8*17/(17+17+34+34) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
Myy col above kNm 0.0 1.3 1.3 1.3 1.3 1.3 1.3 0.0 0.0 0.0
about y-ycol below kNm 1.5 1.3 1.3 1.3 1.3 1.3 1.3 0.0 0.0 0.0
10695684.xls 11/28/200803:42:23 p5
Project Spreadsheets to BS 8110 Made by rmw Job No R68
LocationEdge Column B1 (akin to D&D) BEAM/SLAB & COLUMN STIFFNESSES 28-Nov-08
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 p1 OF 1
Originated from RCC51.xls on CD © 1999 BCA for RCC
Level 7 6 5 4 3 2 1 Level 7 6 5 4 3 2 1
A-B Span 5.000 5.000 5.000 5.000 5.000 5.000 5.000 0.000 0.000 0.000 B-C Span 5.000 5.000 5.000 5.000 5.000 5.000 5.000 0.000 0.000 0.000
slab depth m 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.000 0.000 0.000 slab depth m 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.000 0.000 0.000
width (o/a) m 3.700 3.700 3.700 3.700 3.700 3.700 3.700 0.000 0.000 0.000 width (o/a) m 3.700 3.700 3.700 3.700 3.700 3.700 3.700 0.000 0.000 0.000
A m2 0.648 0.648 0.648 0.648 0.648 0.648 0.648 0.000 0.000 0.000 0 A m2 0.648 0.648 0.648 0.648 0.648 0.648 0.648 0.000 0.000 0.000
Ay m3 0.057 0.057 0.057 0.057 0.057 0.057 0.057 0.000 0.000 0.000 Ay m3 0.057 0.057 0.057 0.057 0.057 0.057 0.057 0.000 0.000 0.000
Ay^2 m4 0.0050 0.0050 0.0050 0.0050 0.0050 0.0050 0.0050 0.0000 0.0000 0.0000 Ay^2 m4 0.0050 0.0050 0.0050 0.0050 0.0050 0.0050 0.0050 0.0000 0.0000 0.0000
Ina m4 0.0017 0.0017 0.0017 0.0017 0.0017 0.0017 0.0017 0.0000 0.0000 0.0000 Ina m4 0.0017 0.0017 0.0017 0.0017 0.0017 0.0017 0.0017 0.0000 0.0000 0.0000
Beam depth m 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.000 0.000 0.000 Beam depth m 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.000 0.000 0.000
width (o/a) m 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.000 0.000 0.000 width (o/a) m 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.000 0.000 0.000
A m2 0.105 0.105 0.105 0.105 0.105 0.105 0.105 0.000 0.000 0.000 A m2 0.105 0.105 0.105 0.105 0.105 0.105 0.105 0.000 0.000 0.000
Ay m3 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.000 0.000 0.000 Ay m3 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.000 0.000 0.000
Ay^2 m4 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0000 0.0000 0.0000 Ay^2 m4 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0000 0.0000 0.0000
Ina m4 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0000 0.0000 0.0000 Ina m4 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0000 0.0000 0.0000
T-beam Ybar m4 0.0997 0.0997 0.0997 0.0997 0.0997 0.0997 0.0997 0.0000 0.0000 0.0000 T-beam Ybar m4 0.0997 0.0997 0.0997 0.0997 0.0997 0.0997 0.0997 0.0000 0.0000 0.0000
Ina m4 0.0034 0.0034 0.0034 0.0034 0.0034 0.0034 0.0034 0.0000 0.0000 0.0000 Ina m4 0.0034 0.0034 0.0034 0.0034 0.0034 0.0034 0.0034 0.0000 0.0000 0.0000
k m3 0.000683 0.000683 0.000683 0.000683 0.000683 0.000683 0.000683 0.000000 0.000000 0.000000 k m3 0.000683 0.000683 0.000683 0.000683 0.000683 0.000683 0.000683 0.00E+00 0.00E+00 0.00E+00
k/2 m3 0.000342 0.000342 0.000342 0.000342 0.000342 0.000342 0.000342 0.000000 0.000000 0.000000 k/2 m3 0.000342 0.000342 0.000342 0.000342 0.000342 0.000342 0.000342 0.00E+00 0.00E+00 0.00E+00
k/2 dm3 0.342 0.342 0.342 0.342 0.342 0.342 0.342 0.000 0.000 0.000 k/2 dm3 0.342 0.342 0.342 0.342 0.342 0.342 0.342 0.000 0.000 0.000
Level 7 6 5 4 3 2 1 Level 7 6 5 4 3 2 1
1-2 Span 8.000 8.000 8.000 8.000 8.000 8.000 8.000 0.000 0.000 0.000 n/a Span 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
slab depth m 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.000 0.000 0.000 slab depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
width (o/a) m 4.700 4.700 4.700 4.700 4.700 4.700 4.700 0.000 0.000 0.000 width (o/a) m 5.000 5.000 5.000 5.000 5.000 5.000 5.000 0.000 0.000 0.000
A m2 0.823 0.823 0.823 0.823 0.823 0.823 0.823 0.000 0.000 0.000 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay m3 0.072 0.072 0.072 0.072 0.072 0.072 0.072 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay^2 m4 0.0063 0.0063 0.0063 0.0063 0.0063 0.0063 0.0063 0.0000 0.0000 0.0000 Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Ina m4 0.0021 0.0021 0.0021 0.0021 0.0021 0.0021 0.0021 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Beam depth m 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.000 0.000 0.000 Beam depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
width (o/a) m 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.000 0.000 0.000 width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
A m2 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.000 0.000 0.000 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay m3 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay^2 m4 0.0094 0.0094 0.0094 0.0094 0.0094 0.0094 0.0094 0.0000 0.0000 0.0000 Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Ina m4 0.0031 0.0031 0.0031 0.0031 0.0031 0.0031 0.0031 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
T-beam Ybar m4 0.1126 0.1126 0.1126 0.1126 0.1126 0.1126 0.1126 0.0000 0.0000 0.0000 T-beam Ybar m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Ina m4 0.0086 0.0086 0.0086 0.0086 0.0086 0.0086 0.0086 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
k m3 0.001072 0.001072 0.001072 0.001072 0.001072 0.001072 0.001072 0.000000 0.000000 0.000000 k m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
k/2 m3 0.000536 0.000536 0.000536 0.000536 0.000536 0.000536 0.000536 0.000000 0.000000 0.000000 k/2 m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
k/2 dm3 0.536 0.536 0.536 0.536 0.536 0.536 0.536 0.000 0.000 0.000 k/2 dm3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
COLUMN STIFFNESSES
LEVEL 7 to 6 6 to 5 5 to 4 4 to 3 3 to 2 2 to 1 Below 1
about xxI m4 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0000 0.0000 0.0000
kupper dm3 0.0000 0.1688 0.1688 0.1688 0.1688 0.1688 0.1688 0.0000 0.0000 0.0000
klower dm3 0.169 0.169 0.169 0.169 0.169 0.169 0.169 0.000 0.000 0.000
about yyI m4 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0000 0.0000 0.0000
kupper dm3 0.0000 0.1688 0.1688 0.1688 0.1688 0.1688 0.1688 0.0000 0.0000 0.0000
klower dm3 0.169 0.169 0.169 0.169 0.169 0.169 0.169 0.000 0.000 0.000
10695684.xls 11/28/2008 6
Disclaimer
All advice or information from the British Cement Association and/or Reinforced Concrete C
intended for those who will evaluate the significance and limitations of its contents and tak
responsibility for its use and application. No liability (including that for negligence) for any
from such advice or information is accepted by the BCA, RCC or their subcontractors, suppl
advisors. Users should note that all BCA software and publications are subject to revision f
time and should therefore ensure that they are in possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'Spread
concrete design to BS 8110 and EC2' available from British Cement Association, Telford Ave
Crowthorne, Berkshire RG45 6YS.
Status of spreadsheet
Public release version.
Size (kB)
411