Professional Documents
Culture Documents
Certificate of Airworthiness
and
Export Certificate of Airworthiness
Airworthiness Directorate
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Airworthiness Directorate 1
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
1. Authority 4
2. General 4
6. Invalidation 7
8. Effective 8
9. Cancellation 9
Airworthiness Directorate 2
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Airworthiness Directorate 3
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
1. Authority
1.1 This Air Navigation Order is issued by Director General Civil Aviation Authority in
pursuance of powers vested in him under Rule 4, 16, 18, 19, 20 and 22 of Civil Aviation
Rules 1994.
2. General
2.1 In accordance with the Convention on International Civil Aviation and Rule 16 of Civil
Aviation Rules 1994, no aircraft registered in Pakistan shall fly unless there is, relating to
that aircraft, a current Certificate of Airworthiness, issued or validated by the Airworthiness
Directorate of Civil Aviation Authority of Pakistan.
3.1 Aircraft is categorized according to the functions performed by it. Civil Aviation Rules 1994
permit operation of the aircraft in the following categories:
3.2 Owner/Operator of the aircraft shall specify in the application for issue / validation of
Certificate of Airworthiness, the category or categories mentioned above for which the
aircraft is required to be certificated.
3.3 Inspection of the aircraft shall be carried out by the Airworthiness Directorate to establish
compliance with laid down instructions and requirements regarding Airworthiness.
Note: Aircraft includes the structure, systems, components, instruments, equipment and
engines.
4.2 All the work required to be done on the aircraft for the issue of Certificate of Airworthiness
shall be carried out by appropriately licensed aircraft maintenance engineer or an
Organization approved by Airworthiness Directorate and shall conform to the requirements,
specifications, drawings and instructions issued by the aircraft manufacturer.
4.3 The aircraft shall be test flown according to flight test schedule acceptable to the
Airworthiness Directorate to establish compliance with:
4.3.1 The Airworthiness requirements of the State of Manufacture or the previous State
of Registry.
Airworthiness Directorate 4
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
4.3.2. In certain circumstances the Airworthiness Directorate may require special flight tests
to determine conformity with the national Airworthiness requirements.
4.3.3 Such other conditions as prescribed by the Airworthiness Directorate for issue of a
Certificate of Airworthiness.
4.4 The aircraft maintenance engineer or the approved Organization shall certify the aircraft to
be fit for flight test as determined through inspections of the aircraft, its records and
manuals and that all applicable Airworthiness Directives, mandatory modifications and
inspections issued by the State of manufacture have been carried out and/or certified to
have been carried out.
4.5 The aircraft shall be weighed to determine its accurate empty weight and its corresponding
centre of gravity to up-date its weight and balance schedule and trim sheets. The aircraft
weighing shall be carried out under the supervision of Airworthiness Directorate for
approval of its weight and balance schedule. Weighing carried out under the supervision of
State of last registry may be accepted till its re-weighing becomes due. Its weight and
balance schedule shall be prepared on format acceptable to CAA (Pak).
4.6 Prior to issue of first Certificate of Airworthiness by CAA (Pak), the Owner / Operator of the
aircraft shall arrange training of at least four Airworthiness officials (02 Aerospace & 02
Avionics) so as to provide continued Airworthiness surveillance of the aircraft. The
expenditures on the training will be at no cost to CAA. This training will be provided along
with own engineers / personnel required for maintenance of the aircraft, engines and
equipment. The training shall be imparted by training centre approved by the Airworthiness
Directorate.
4.7 Following documents relating to the aircraft shall be submitted to Airworthiness Directorate
for retention:-
4.7.1 A copy of type certificate and its technical data sheets or acceptable equivalent
documents issued by the State of design/manufacture.
4.7.2 A copy of the Certificate of Airworthiness for export issued by the State of
manufacture/State of last registry or the current Certificate of Airworthiness.
Airworthiness Directorate 5
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
4.7.8 A copy of production flight test report issued by the aircraft manufacturer.
4.7.9.1 Flight test report of the aircraft on CAA Form 058 (Rev-1)
4.7.9.2 Flight test report of the aircraft's Avionics equipment on CAA Form 062
(Rev-1).
4.7.9.3 Ground test (ATC) report of the aircraft's Avionics equipment on CAA
Form 063.
4.8 The Certificate of Airworthiness of the aircraft will be issued by the Airworthiness
Directorate and validated for a period of twelve (12) months by the nearest Airworthiness
field office on Form CAA-462 (Rev-II) after its necessary checks and inspections have been
carried out satisfactorily. Sample of the Form is attached as Appendix ‘A’.
5.1 The airworthiness field office will renew certificate of airworthiness of the aircraft when the
owner/operator applies on CAA Form 469 along with necessary fee. The aircraft shall
comply with the following requirements:
5.1.1. The aircraft has been serviced and maintained in accordance with schedule,
methods and procedures given by the manufacturer and approved by the
Airworthiness Directorate;
5.1.2. All inspections, repairs, overhauls, modifications and replacements which affect
Airworthiness have been carried out as prescribed by the manufacturer and
approved by the Airworthiness Directorate;
5.1.3. If the aircraft is the subject of reliability programme, including in particular engine
trend monitoring, corrective action has been instituted to rectify any adverse
trends;
5.1.4. All certification maintenance requirements have been complied with at the
prescribed intervals and by appropriately licensed personnel;
5.1.7. Any parts of the aircraft that have an ultimate service life limit declared by the
organization responsible for the type design or the Airworthiness Directorate
have not exceeded their approved lives;
Airworthiness Directorate 6
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
5.1.8. If the aircraft has been released to service with any airworthiness significant
systems, components or equipment unserviceable, this is in compliance with a
minimum equipment list or similar document approved by the CAA;
5.1.9. If the aircraft has been released into service with any structural parts missing,
this is in compliance with procedures approved by the Airworthiness Directorate.
5.1.10. All minor damages and repairs are within limits as given in the structural repair
manual for the aircraft;
5.1.11. All markings and placards included in the approval of the type design and
approved by the Airworthiness Directorate are available;
5.1.12. The aircraft weight and balance data is in conformity with the requirements of the
Airworthiness Directorate, including reweighing (if required) and/or compliance
with a system for recording progressive weight and balance change;
5.1.13. The aircraft maintenance records are in conformity with the requirements of the
Airworthiness Directorate;
5.1.14. Airworthiness flight test shall be completed to ensure that the aircraft flight
characteristics do not change significantly from the previous flight test and to
ensure proper functioning of the aircraft and its systems in flight. However flight
test report of the aircraft which is maintained under approved progressive
maintenance schedule will be carried out as per the requirements given in the
schedule. The flight test reports shall be submitted to the Airworthiness
Directorate.
5.2 The Certificate of Airworthiness of the aircraft will be renewed for a period not exceeding
twelve months from the date of satisfactory flight test. The aircraft which is maintained
under the approved progressive maintenance schedule will have its Certificates of
Airworthiness renewed from the next day of its expiry period. The renewal will be affected
after necessary checks and inspections have been carried out satisfactorily by the nearest
Airworthiness field office.
6.2.2 If the aircraft or any of its equipment which is essential to the continued
airworthiness of the aircraft is overhauled or repaired, or such equipment is
removed or replaced, other than in a manner which complies with the
maintenance and repair procedures issued by the aircraft and its equipment
manufacturers and maintenance schedule approved by the Airworthiness
Directorate;
Airworthiness Directorate 7
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
6.2.4 If any inspection of the aircraft, or of its equipment, required by the approved
maintenance procedures or schedules is not carried out;
6.2.6 If any modification is carried out or equipment installed, other than as approved
by the Airworthiness Directorate;
6.2.8 If the aircraft has sustained damage of such nature that in the opinion of a
licensed aircraft maintenance engineer, or authorized person or an approved
maintenance organization it is no longer fit to fly.
6.2.9 If the Airworthiness Directorate has reason to believe that the aircraft is not
airworthy.
7.1 Part IV section I Rule 16(c) requires an export certificate of airworthiness to issued, when a
product is exported from Pakistan. An export certificate of airworthiness will be issued to:
a) New aircraft that are assembled and that have been flight tested, and other Class I
products located in Pakistan.
b) Class II products.
Note - Class I product – is a complete aircraft, aircraft engine, or propeller which has been type certified
and has been issued with a data sheet.
Class II product – is a major component of Class I product such as wings, fuselages, empennage
assemblies, landing gears, power transmission, control surfaces, etc., the failure of which would
jeopardize the safety of a Class I product.
7.2 The applicant will be entitled to an export certificate of airworthiness only if the applicant
shows that the product meets all the airworthiness requirements. An export certificate of
airworthiness does NOT authorize the operation of aircraft. The export certificate of
airworthiness will be issued on the CAA form CAA-702. Sample of the Form is attached as
Appendix ‘B’. The applicant may apply for an export certificate of airworthiness on the form
attached as Appendix ‘C’.
8. Cancellation
th
8.1 This Air Navigation Order cancels Air Navigation Order 92.0004 issue-I dated 28 March,
2000.
Airworthiness Directorate 8
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
9. Effective date
9.1 This Air Navigation Order shall come into force with immediate effect.
Airworthiness Directorate 9
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Appendix ‘A’
CAA462 (REV- III)
CERTIFICATE NO:
4. Category:
5. This Certificate of Airworthiness is issued, pursuant to the Convention of International Civil Aviation
dated 7th December 1944. Code of Airworthiness of state of design ( ) Civil Aviation
Ordinance 1960 and the rules made thereunder in respect of the mentioned aircraft which is considered to
be Airworthy when maintained and operated in accordance with the forgoing and the pertinent limitations.
DIRECTOR AIRWORTHINESS
Date of Issue: for DIRECTORGENERAL
6. This certificate is valid for the period(s) shown below Signature, official stamp & date
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
From…………………………………. To…………………………………….. ………………………………………………………
NOTE: No entries or endorsements may be made on this Certificate except in the manner and by the
person authorized for that purpose by the Director General Civil Aviation Authority. If this Certificate is
lost, the Director General Civil Aviation Authority should be informed at once, the Certificate No. being
quoted.
Any person finding this Certificate should forward it immediately to the Director General Civil Aviation
Authority, QIAP, Karachi, Pakistan.
Airworthiness Directorate
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Airworthiness Directorate 1
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Appendix ‘B’
CAA-702
PAKISTAN
CIVIL AVIATION AUTHORITY
Airworthiness Directorate
Certificate No.
____________________ ______________________
Date Signature
Place: Karachi Director Airworthiness
*For complete aircraft, list applicable specification or Type Certificate Date Sheet numbers for the aircraft,
engine, and propeller. Applicable specifications or Type Certificate Data sheet, if not attached to this Export
Certificate, will have been forwarded to the appropriate governmental office of the importing country.
Airworthiness Directorate 2
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Airworthiness Directorate 3
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Appendix ‘C’
CAA-701
Export Certificate No.
Application for Export
Certificate of Airworthiness
INSTRUCTIONS — This application is to be submitted to an nearest field office (two copy) when the product(s) to be exported is (are) presented
for inspection. Use Part I for Class 1 products and Part II for Class II. For complete aircraft execute items 1 through 11, as applicable. For
engines and propellers, omit item 5A. Part III is for CAA use only.
5. Description of product(s)
Type Make and Model Year of Manufacture Serial Nos.
(a) (b) manufacture (c) Operating time (Hours)
(e)
Since
Overhaul Total
A. AIRCRAFT
B. ENGINES
C. PROPELLERS
6. Does the product comply with all applicable Civil Aviation Regulations, Airworthiness Directives, and other CAA requirements?
YES NO (Explain in “Remarks”)
7. Have applicable special requirements of the importing country been complied with?
YES NO (Explain in “Remarks”)
10. Remarks
11. EXPORTER’S CERTIFICATION — The undersigned certifies that the above statements are true and that the product(s) described herein is
(are)
airworthy and in condition for safe operation except as may be noted under item 10 “Remarks” above.
Signature of applicant or authorized representative Name and Designation Date
Airworthiness Directorate 4
th
AIR NAVIGATION ORDER - Number 92.0004, Issue 2 dated 10 July 2004
Certificate of Airworthiness & Export Certificate of Airworthiness
Part II — Application for Export Certificate of Airworthiness of Aeronautical Parts (Complete items 12-20)
12. Name and address of exporter 13. Name and address of foreign purchaser 14. Country of
destination
18. Have applicable special requirements of the importing country been complies with? YES NO (Explain in item 10 “Remarks”)
19. Exporter’s Certification — I certify that the foregoing statements are true and that the parts described herein are airworthy, conform to FAA
approved design data, are in condition for safe operation except as may be noted in item 10 “Remarks”.
Part III
Recommendations (FOR CAA Field Office USE ONLY)
20. It is considered that the product(s) described in Part I or Part II is (are) airworthy
and conform(s) to pertinent requirements except as noted in Item 10. (Check one) Part I Part II
Airworthiness Directorate 5