Professional Documents
Culture Documents
Induction Motors
Catalogue-2009/04 E
TAC-C
CAST IRON Frame
Size 71->355
0,18-315 kW
t-telectric.com
Technical features
TAC-C motors are designed and manufactured according to IEC34, IEC72, DIN42673, BS4999, AS1359, GB755, GB10069, and
Q/JBQS27.
Mechanical design
Totally enclosed fan cooled IP55 Powerful refit available
Heavy duty design, manufactured from corrosion resistant The motors satisfy the requirements of a wide range of envi-
cast iron materials to be used in all kinds of environment. ronments and applications. Improved protection, insulation
The motor is mechanically very strong and robust and as level, regreasing facilities, dust-proof, sealing rings, rain-
standard designed for additional energy saving through fre- proofing are all available. A full range of options are listed on
quency converter drives. Drain holes and plugs as standard pages 15-16.
in sizes 280 to 355.
Code assignment
TAC - C 180 M 4
Motor size
Application data
- Altitude : maximum 1000 meters above sea level
- Ambiant temperature : max. 40°c
- Duty cycle : Continuous S1
- Insulation class F
- Temperature rise : 80°K
2
Insulation
Motors are designed for a maximum ambianti temperature meters above sea level. If temperature and/or altitude is
environment of 40°C and a maximum altitude of 1000 higher, motor should be derated according to tables below.
Height above sea level, m 1000 1500 2000 2500 3000 3500 4000
Permitted output, % of rated output 100 96 92 88 84 80 76
Other voltages
Motors wound for a given voltage at 50 Hz can also be remain approximately the same.
used for other voltage. Recalculation factors for current and Guaranteed values available on request.
torque are given below, efficiency, power factor and speed
3
Motors used at 60 Hz
Motors wounded for a given voltage at 50 Hz can be used
at 60 Hz without modification, considering recalculations
factors here under..
Standard bearing type Cable entry Standard bearing type Cable entry
Type Pole D-end N-end mm Type Pole D-end N-end mm
71 2,4,6,8 6202 2RS/C3 6202 2RS/C3 2-M25X1,5 250 4,6,8 6314/C3 6313/C3 2-M63X1,5
80 2,4,6,8 6204 2RS/C3 6204 2RS/C3 2-M25X1,5 280 2 6314/C3 6314/C3 2-M63X1,5
90 2,4,6,8 6205 2RS/C3 6205 2RS/C3 2-M25X1,5 280 4,6,8 6317/C3 6314/C3 2-M63X1,5
100 2,4,6,8 6206 2RS/C3 6206 2RS/C3 2-M25X1,5 315 2 6317/C3 6317/C3 2-M63X1,5
112 2,4,6,8 6206 2RS/C3 6206 2RS/C3 2-M32X1,5 315 4,6,8,10 N319 6319/C3 2-M63X1,5
132 2,4,6,8 6208 2RSC3 6208 2RS/C3 2-M32X1,5 355 2 6319/C3 6319/C3 2-M63X1,5
160 2,4,6,8 6209 2RS/C3 6209 2RS/C3 2-M40X1,5 355 4,6,8,10 N322 6322/C3 2-M63X1,5
180 2 6211 2RS/C3 6211 2RS/C3 2-M40X1,5
180 4,6,8 6311 2RS/C3 6211 2RS/C3 2-M40X1,5
200 2 6212 2RS/C3 6212 2RS/C3 2-M50X1,5
200 4,6,8 6312 2RS/C3 6212 2RS/C3 2-M50X1,5
225 2 6312/C3 6312/C3 2-M50X1,5
225 4,6,8 6313/C3 6312/C3 2-M50X1,5
250 2 6313/C3 6313/C3 2-M63X1,5
4
Motors for EU efficiency levels
T-T Electric have a motor range to meet or exceed the minimum efficiencies stated in the highest level of the EU agreement of
LV motors.
These efficiency levels apply to 2- and 4-pole, three phase squirrel cage induction motors, rated for 400 V, 50 Hz, with S1 duty
class with the output 1.1 to 90 kW which account for the largest volume on the market.
Three phase induction motors, 400 V 50 Hz – T-T Electric motor efficiency levels
2 pole 4 pole
100 100
95 95
EFF1 EFF1
90 90
Efficiency (%)
85 Efficiency (%) 85
EFF2 EFF2
80 80
EFF3 EFF3
75 75
EU efficiency classes
5
Technical Data H71-355 - 50 Hz
6
Technical Data H71-355 - 60 Hz
7
Technical Data H71-355 - 50 Hz
8
Technical Data H71-355 - 60 Hz
1200 r/min = 6 poles, 460V 60Hz
Efficiency Current Torque Moment Sound
Speed Power
Output Type Full of inertie Weight pressure
n factor In Is Tn Ts Tmax
kw designation load inJ=GD2/4 kg) level Lp
r/min cos A In Nm Tn Tn
100% kgm2 dB(A)
0,21 TAC-C 71A6 1090 55,0 0,66 0,8 4,0 1,8 1,8 1,8 0,00056 10 45
0,29 TAC-C 71B6 1070 60,0 0,66 1,0 4,0 2,6 1,8 1,8 0,00074 11 45
0,43 TAC-C 80A6 1101 63,0 0,67 1,3 5,0 3,7 1,9 1,9 0,00159 17 48
0,63 TAC-C 80B6 1101 65,0 0,68 1,9 5,0 5,5 1,9 1,9 0,00196 18 48
0,86 TAC-C 90S6 1105 71,0 0,73 2,2 5,0 7,4 2,0 2,2 0,00292 21 51
1,27 TAC-C 90L6 1100 73,0 0,75 3,0 5,0 11,0 2,0 2,2 0,00379 25 51
1,73 TAC-C 100L6 1130 76,0 0,77 3,9 5,5 14,6 2,0 2,2 0,00999 32 54
2,53 TAC-C 112M6 1145 80,0 0,77 5,4 5,5 21,1 2,0 2,2 0,01559 40 57
3,45 TAC-C 132S6 1150 82,5 0,79 7,0 6,5 28,7 2,0 2,2 0,03116 55 59
4,6 TAC-C 132MA6 1150 84,0 0,79 9,1 6,5 38,2 2,0 2,2 0,04074 65 59
6,33 TAC-C 132MB6 1150 86,0 0,80 12,1 6,5 52,6 2,0 2,2 0,05332 75 59
8,6 TAC-C 160M6 1167 88,0 0,79 16,2 6,0 70,4 2,0 2,3 0,09231 119 64
12,7 TAC-C 160L6 1166 89,9 0,80 23,2 6,0 104 2,2 2,3 0,1297 140 65
17,3 TAC-C 180L6 1176 91,1 0,83 30,0 6,0 141 2,3 2,8 0,2418 180 66
21,3 TAC-C 200LA6 1175 90,9 0,84 36,6 6,0 173 2,2 2,8 0,34174 231 67
25,3 TAC-C 200LB6 1175 90,0 0,85 43,4 6,0 206 2,1 2,8 0,46837 254 67
34,5 TAC-C 225M6 1180 90,9 0,78 63,9 6,6 279 2,2 2,8 0,62691 308 69
42,6 TAC-C 250M6 1179 92,8 0,89 67,8 6,8 345 2,3 2,8 0,97 382 71
51,8 TAC-C 280S6 1175 92,6 0,87 84,4 6,5 421 2,3 2,4 1,25 482 72
63 TAC-C 280M6 1175 93,0 0,88 101 7,0 512 2,3 2,5 1,485 532 73
86 TAC-C 315S6 1188 93,8 0,87 132 7,4 691 2,0 2,0 3,1942 920 78
104 TAC-C 315M6 1188 94,0 0,87 160 7,4 836 2,0 2,0 3,723 1010 73
127 TAC-C 315LA6 1188 94,5 0,88 192 6,8 1021 2,0 2,0 4,2564 1060 73
152 TAC-C 315LB6 1188 95,0 0,88 228 6,8 1222 2,0 2,0 5,1577 1120 73
184 TAC-C 355MA6 1188 94,9 0,90 270 6,8 1481 2,0 2,3 7,8 1360 78
230 TAC-C 355MB6 1188 95,1 0,90 337 6,7 1852 1,9 2,2 9,1 1551 78
287,5 TAC-C 355L6 1188 95,3 0,90 421 6,7 2315 1,9 2,3 11,4 2057 78
9
Dimension drawing, H71-355, B3
Type
Pole A AA AB AC B BB C D E F G GD DB EG
TAC-C
71 2-6 112 24 150 136,5 90 108 45 14 j6 30 5 11 5 M5 12,5
80 2-8 125 35 165 155 100 130 50 19 j6 40 6 15,5 6 M6 16
90S 2-8 140 36 180 169 100 140 56 24 j6 50 8 20 7 M8 19
90L 2-8 140 36 180 169 125 165 56 24 j6 50 8 20 7 M8 19
100L 2-8 160 40 205 195 140 175 63 28 j6 60 8 24 7 M10 22
112M 2-8 190 45 230 217 140 180 70 28 j6 60 8 24 7 M10 22
132S 2-8 216 55 270 260 140 190 89 38 k6 80 10 33 8 M12 28
132M 2-8 216 55 270 260 178 230 89 38 k6 80 10 33 8 M12 28
160M 2-8 254 65 320 314 210 260 108 42 k6 110 12 37 8 M16 36
160L 2-8 254 65 320 314 254 305 108 42 k6 110 12 37 8 M16 36
180M 2-4 279 70 355 352 241 315 121 48 k6 110 14 42,5 9 M16 36
180L 4-8 279 70 355 352 279 350 121 48 k6 110 14 42,5 9 M16 36
200L 2-8 318 70 395 395 305 370 133 55 m6 110 16 49 10 M20 39
225S 4-8 356 75 435 442 286 370 149 60 m6 140 18 53 11 M20 39
225M 2 356 75 435 442 311 395 149 55 m6 110 16 49 10 M20 39
225M 4-8 356 75 435 442 311 395 149 60 m6 140 18 53 11 M20 39
250M 2 406 80 490 480 349 445 168 60 m6 140 18 53 11 M20 39
250M 4-8 406 80 490 480 349 445 168 65 m6 140 18 58 11 M20 39
280S 2 457 85 550 535 368 490 190 65 m6 140 18 58 11 M20 39
280S 4-8 457 85 550 535 368 490 190 75 m6 140 20 67,5 12 M20 39
280M 2 457 85 550 535 419 540 190 65 m6 140 18 58 11 M20 39
280M 4-8 457 85 550 535 419 540 190 75 m6 140 20 67,5 12 M20 39
315S 2 508 120 635 620 406 570 216 65 M6 140 18 58 11 M20 42
315S 4-8 508 120 635 620 406 570 216 80 m6 170 22 71 14 M20 42
315M 2 508 120 635 620 457 680 216 65 m6 140 18 58 11 M20 42
315M 4-8 508 120 635 620 457 680 216 80 m6 170 22 71 14 M20 42
315L 2 508 120 635 620 508 680 216 65 m6 140 18 58 11 M20 42
315L 4-8 508 120 635 620 508 680 216 80 m6 170 22 71 14 M20 42
355M 2 610 120 730 710 560 750 254 75 m6 140 20 67.5 12 M20 42
355M 4-6 610 120 730 710 560 750 254 95 m6 170 25 86 16 M24 47
355L 2 610 120 730 710 630 750 254 75 m6 140 20 67.5 12 M20 42
355L 4-6 610 120 730 710 630 750 254 95 m6 170 25 86 16 M24 47
10
Dimension drawing, H71-355, B5-B35
Type
Pole H HA HD K L LD LA M N P S T
TAC-C
71 2-6 71 10 195 7 255 100 10 130 110 160 4-10 3,5
80 2-8 80 12 214 10 295 115 12 165 130 200 4-12 3,5
90S 2-8 90 12 250 10 320 125 12 165 130 200 4-12 3,5
90L 2-8 90 12 250 10 345 125 12 165 130 200 4-12 3,5
100L 2-8 100 14 270 12 385 143 13 215 180 250 4-15 4
112M 2-8 112 15 300 12 400 147 14 215 180 250 4-15 4
132S 2-8 132 18 345 12 470 182 14 265 230 300 4-15 4
132M 2-8 132 18 345 12 510 182 14 265 230 300 4-15 4
160M 2-8 160 20 420 15 615 256 15 300 250 350 4-19 5
160L 2-8 160 20 420 15 670 256 15 300 250 350 4-19 5
180M 2-4 180 22 455 15 700 271 15 300 250 350 4-19 5
180L 4-8 180 22 455 15 740 271 15 300 250 350 4-19 5
200L 2-8 200 25 505 19 770 296 17 350 300 400 4-19 5
225S 4-8 225 28 555 19 815 329 20 400 350 450 8-19 5
225M 2 225 28 555 19 820 299 20 400 350 450 8-19 5
225M 4-8 225 28 555 19 845 329 20 400 350 450 8-19 5
250M 2 250 30 615 24 910 347 22 500 450 550 8-19 5
250M 4-8 250 30 615 24 910 347 22 500 450 550 8-19 5
280S 2 280 35 680 24 985 355 22 500 450 550 8-19 5
280S 4-8 280 35 680 24 985 355 22 500 450 550 8-19 5
280M 2 280 35 680 24 1035 355 22 500 450 550 8-19 5
280M 4-8 280 35 680 24 1035 355 22 500 450 550 8-19 5
315S 2 315 45 845 28 1190 397 22 600 550 660 8-24 6
315S 4-8 315 45 845 28 1220 427 22 600 550 660 8-24 6
315M 2 315 45 845 28 1300 397 22 600 550 660 8-24 6
315M 4-8 315 45 845 28 1330 427 22 600 550 660 8-24 6
315L 2 315 45 845 28 1300 397 22 600 550 660 8-24 6
315L 4-8 315 45 845 28 1330 427 22 600 550 660 8-24 6
355M 2 355 52 1010 28 1500 424 25 740 680 800 8-24 6
355M 4-6 355 52 1010 28 1530 454 25 740 680 800 8-24 6
355L 2 355 52 1010 28 1500 424 25 740 680 800 8-24 6
355L 4-6 355 52 1010 28 1530 454 25 740 680 800 8-24 6
11
Dimension drawing, B14-B34
Type TAC-
C Pole A AA AB AC B BB C D E F G GD DB EG H HA HD K L LD AD
71 2-6 112 24 150 136,5 90 108 45 14 30 5 11 5 M5 12,5 71 10 195 7 255 100 120
80 2-8 125 35 165 155 100 130 50 19 40 6 15,5 6 M6 16 80 12 220 10 295 115 145
90S 2-8 140 36 180 169 100 140 56 24 50 8 20 7 M8 19 90 12 250 10 320 125 150
90L 2-8 140 36 180 169 125 165 56 24 50 8 20 7 M8 19 90 12 250 10 345 125 150
100L 2-8 160 40 205 195 140 175 63 28 60 8 24 7 M10 22 100 14 270 12 385 143 175
112M 2-8 190 45 230 217 140 180 70 28 60 8 24 7 M10 22 112 15 300 12 400 147 185
Size P M N S T
C105 105 85 70 M6 2,5
C120 120 100 80 M6 3
C140 140 115 95 M8 3
C140 140 115 95 M8 3
C160 160 130 110 M8 3,5
C160 160 130 110 M8 3,5
12
Efficiency
Typical efficiency values are given for part load in the table here under.
Efficiency (%)
2 - 4 Poles 6 - 8 Poles
1.25 1.00 0.75 0.50 0.25 1.25 1.00 0.75 0.50 0.25
xPn xPn xPn xPn xPn xPn xPn xPn xPn xPn
97 97 97 96 92 97 97 97 95 92
96 96 96 95 91 96 96 96 94 91
95 95 95 94 90 95 95 95 93 90
94 94 94 93 89 94 94 94 92 89
93 93 93 92 88 93 93 93 91 88
92 92 92 91 87 92 92 92 90 86
91 91 91 90 86 91 91 91 89 85
89 90 90 89 85 90 90 90 88 84
88 89 89 88 84 89 89 89 87 83
87 88 88 87 83 88 88 88 86 82
86 87 87 86 82 87 87 87 84 80
86 86 86 85 80 86 86 86 83 78
83 85 86 85 79 85 85 85 82 76
82 84 85 84 78 84 84 84 81 75
81 83 84 83 76 83 83 84 80 74
80 82 83 82 74 81 82 82 78 72
79 81 82 81 73 80 81 81 77 70
77 80 81 79 71 79 80 80 76 68
76 79 80 78 69 78 79 80 75 67
75 78 79 76 67 77 78 78 74 66
74 77 78 75 65 76 77 77 73 64
73 76 77 74 63 75 76 76 72 64
72 75 76 72 61 74 75 75 71 62
71 74 75 71 60 73 74 74 70 62
70 73 74 70 59 72 73 73 69 60
69 72 73 69 57 70 72 71 67 58
68 71 72 68 56 69 71 70 66 56
67 70 71 67 54 68 70 69 65 56
0.92 0.92 0.90 0.84 0.68 0.92 0.92 0.90 0.84 0.68
0.91 0.91 0.89 0.83 0.66 0.91 0.91 0.89 0.83 0.66
0.90 0.90 0.88 0.82 0.64 0.90 0.90 0.88 0.82 0.64
0.89 0.89 0.87 0.81 0.62 0.89 0.89 0.87 0.81 0.62
0.88 0.88 0.86 0.80 0.60 0.88 0.88 0.86 0.80 0.60
0.88 0.87 0.84 0.76 0.58 0.88 0.87 0.84 0.76 0.58
0.87 0.86 0.82 0.73 0.58 0.87 0.86 0.82 0.73 0.56
0.86 0.85 0.81 0.72 0.54 0.86 0.85 0.81 0.72 0.54
0.85 0.84 0.80 0.71 0.52 0.85 0.84 0.80 0.71 0.52
0.84 0.83 0.78 0.70 0.50 0.84 0.83 0.78 0.70 0.50
0.84 0.82 0.76 0.66 0.46 0.84 0.82 0.76 0.66 0.46
0.84 0.81 0.74 0.63 0.43 0.84 0.81 0.74 0.63 0.43
0.83 0.80 0.73 0.60 0.40 0.83 0.80 0.73 0.60 0.40
0.82 0.79 0.72 0.59 0.38 0.82 0.79 0.72 0.59 0.38
0.82 0.78 0.71 0.58 0.36 0.82 0.78 0.71 0.58 0.36
0.81 0.77 0.69 0.55 0.36 0.81 0.77 0.69 0.55 0.36
0.81 0.76 0.68 0.54 0.34 0.81 0.76 0.68 0.54 0.34
0.80 0.75 0.67 0.53 0.34 0.80 0.75 0.67 0.53 0.34
0.79 0.74 0.66 0.52 0.32 0.79 0.74 0.66 0.52 0.32
0.78 0.73 0.65 0.51 0.32 0.78 0.73 0.65 0.51 0.32
0.78 0.72 0.62 0.48 0.30 0.78 0.72 0.62 0.48 0.30
0.78 0.71 0.61 0.47 0.30 0.78 0.71 0.61 0.47 0.30
0.77 0.70 0.60 0.46 0.30 0.77 0.70 0.60 0.46 0.30
13
Options
Balancing
Balancing to grade B (IEC60034-14) M M M M M
Agressive environment
Stainless steel/acid proof bolts M M M M M
Reinforced tropicalisation M M M M M
Terminal box
Terminal box right or left hand side view from D-end P P P P P
Cooling system
Unidirectional fan, clockwise seen from D-end R R R R R
Unidirectional fan, counter clockwise seen from D-end R R R R R
Aluminium fan R R R R R
Cooling method IC418(without fan) R R R R R
Separate motor cooling fan (fan axial, N-end) M M M M M
Drain holes
Modified drain hole position (for specified IM xxxx) M M M M M
Drain holes with plugs M M M M M
Earthing bolt
External earthing bolt M M M M M
Mounting arrangements
IM2101 foot/flange mounted, IEC flange, from IMI1001(B34 from B3) M(71-160) NA(180-355)
IM2001 foot/flange mounted, IEC flange,from IMI1001(B35 from B3) M M M M M
IM3601 flange mounted, IEC flange, from IMI3001(B14 fom B5) M(71-160) NA(180-355)
IM3001 flange mounted, IEC flange, from IMI3601(B5 from B14) M(71-160) NA(180-355)
Paint
Special paint colour, standard grade M M M M M
Protection
Protective roof, vertical motor, shaft down M M M M M
IPW55 NA P(90-250) NA(280-355)
Degree of protection IP56 R R R R R
Heating element
Heating element, 200-240V M M M M M
Insulation system
Winding insulation class H R R R R R
Special winding insulation for frequency converter supply R R R R R
14
TAC-C cast iron motors basic design
15
TAC-C cast iron motors basic design
T-T Electric reserves the righ to change the design, technical specification and dimensions without prior notice.
16
Name plate
Mounting arrangements
(H71 - 355) (H71 - 160) (H71 - 160) (H71 - 160) (H71 - 160) (H71 - 160)
(H71 - 280) (H71 - 355) (H71 - 160) (H71 - 355) (H71 - 160) (H71 - 160)
(H71 - 112) (H71 - 112) (H71 - 112) (H71 - 112) (H71 - 112) (H71 - 112)
17
Founded over 100 years ago, T-T Electric is a world-class process perfection. The flexible product design ensures
supplier of top-quality industrial electric motors and easy adaptations to customer requirements. This, combined
drives. Pioneers in the industry, we are an experienced with unequalled short delivery times, make T-T Electric a
and established manufacturer of a comprehensive and reference within industry. Our extensive support services
cost-effective range of highly reliable drive products. They include diagnostics and maintenance on site as well as full
are used around the world in the toughest of application overhaul in our own repair facilities.
environments and in all industrial segments.
T-T Electric is committed to a working partnership with our
Driven by customer demand, T-T Electric is continually customers. For mutual benefit, we focus on complete and
researching product excellence and manufacturing innovative solutions together.
Denmark
T-T Electric
Svendborgvej 83
5260 Odense S
Tel: +45 63 13 06 30
E-mail: sales@t-telectric.dk
UK
T-T Electric
Unit 7A Waterloo Park
Upper Brook Street
STOCKPORT SK1 3BP
Tel: +44 (0) 161 480 0037
Fax:+44 (0) 161 476 4390
E-mail: john.legg@t-telectric.com
Germany
T-T Electric
Helgolandstrasse 67
D-70439 Stuttgart
Tel: +49 (0) 711 38 04 410
Fax: +49 (0) 711 38 04 411
E-mail: info@t-telectric.de
Sweden
Thrige Electric
Lefflersgatan 1
PO Box 1641
S-75146 Uppsala
Tel: +46 (0) 18 657010
Fax: +46 (0) 18 107478
E-mail: info@thrige-electric.se
France
T-T Electric
22 rue du 8 mai 1945
F-95340 PERSAN