Professional Documents
Culture Documents
Parameter Reference
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, ple
company headquarters.
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
d service. For any assistance, please contact our local office or
spective holders.
Purpose
This document provides information about the BSC6900 parameters, including the meaning, value, and usage of the
Intended Audience
•Network planners
•Field engineers
•System engineers
•Shift operators
Organization
Description
Parameter ID
Parameter Name
NE
MML Command
Meaning
Feature ID
Feature Name
Value Type
GUI Value Range
Unit
Default Value
Recommended Value
Impact
Parameter Relationship
Access
Service Interrupted After Modification
Interruption Scope
Caution
Validation of Modification
Attribute
about the BSC6900 parameters, including the meaning, value, and usage of the parameters.
ollowing aspects.
Remarks
Simple string for identifying a parameter
Full name of the parameter
NEs on which the parameter is set
Commands for setting the parameter, and optional/mandatory attribute of the
parameter in each command
Functions, functioning ways, and protocols of the parameter
Relevant feature ID
Features using the parameter
Parameter value type
Parameter value range displayed on the GUI
Actual parameter value range corresponding to the GUI Value Range. For example,
the GUI Value Range is 0, and the corresponding Actual Value Range is OFF.
Repeat
Times of
MaccPageRepeatTi Macc
mes Paging BSC6900 SET UDPUCFGDATA(Optional)
AAL2 Path
AAL2PATHT Type BSC6900 ADD AAL2PATH(Mandatory)
Specify SET
AbsTime Time BSC6900 UPOOLPRIMHOSTPOLICY(Mandatory)
AC 0~9 to
ASC
Ac09ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
AC 10 to
ASC
Ac10ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
AC 11 to
ASC
Ac11ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
AC 12 to
ASC
Ac12ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
AC 13 to
ASC
Ac13ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
AC 14 to
ASC
Ac14ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
AC 15 to
ASC
Ac15ToAsc mapping BSC6900 ADD UPRACHACTOASCMAP(Optional)
Access
AccessServiceClas service
s class BSC6900 ADD UPRACHASC(Mandatory)
AC control
ACCTHD threshold BSC6900 SET FCCPUTHD(Optional)
AC control
ACCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Address
and control
field ADD PPPLNK(Optional)
ACFC compress BSC6900 ADD MPGRP(Optional)
AC
Restriction
Interval Of
Access
AcIntervalOfCell Cell BSC6900 SET UACALGO(Mandatory)
Class
Restriction
interval
between
AcIntervalOfCells Cells BSC6900 SET UDSACAUTOALGO(Mandatory)
Range of
restrained ADD
AcRange AC BSC6900 UCELLDSACMANUALPARA(Mandatory)
Range of
restrained
Access
AcRange Class BSC6900 SET UDSACAUTOALGO(Mandatory)
AC
Restriction ADD
AcRestriction Indicator BSC6900 UCELLDSACMANUALPARA(Mandatory)
Interval of
DSAC ADD
AcRstrctIntervalLen Restriction BSC6900 UCELLDSACMANUALPARA(Mandatory)
AC
Restriction
Interval
Interval
length of
AcRstrctIntervalLen length BSC6900 SET UACALGO(Mandatory)
Domain
Specific
Access
Class
AcRstrctIntervalLen Restriction BSC6900 SET UDSACAUTOALGO(Mandatory)
AC
Restriction
AcRstrctPercent Percent BSC6900 SET UACALGO(Mandatory)
AC
Restriction
AcRstrctSwitch Switch BSC6900 SET UACALGO(Optional)
AC restore
ACRTHD threshold BSC6900 SET FCCPUTHD(Optional)
AC restore
ACRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
AC control
ACSW switch BSC6900 SET FCSW(Optional)
A-GPS
Method
AgpsActivateFlag Active Flag BSC6900 ADD USMLCCELL(Optional)
A-GPS
Additional
AGPSAddAssData Data Send
SendFlag Flag BSC6900 SET USMLC(Optional)
A-GPS
Method
AGPSMethodType Type BSC6900 SET USMLC(Optional)
AGPSRECEIVERI
D GPS ID BSC6900 ADD GPS(Mandatory)
AGPSRECEIVERT
YPE GPS type BSC6900 ADD GPS(Mandatory)
AICH
power
AICHPowerOffset offset[dB] BSC6900 ADD UCHPWROFFSET(Optional)
AICH
transmissio
AICHTxTiming n timing BSC6900 ADD UAICH(Optional)
SET ALMLVL(Mandatory)
SET ALMSHLD(Mandatory)
AID Alarm ID BSC6900 SET BOXRPT(Mandatory)
Alarm
Select
AIDST Type BSC6900 ADD OBJALMSHLD(Optional)
Allocate
Code
AllocCodeMode Mode BSC6900 ADD UCELLHSDPA(Optional)
EXP ALMLOG(Optional)
ALMTP Alarm Type BSC6900 STA ALMLOG(Optional)
GPS
antenna
ALTITUDE altitude BSC6900 ADD GPS(Mandatory)
GPS
antenna
ALTITUDEIMP altitude BSC6900 ADD GPS(Mandatory)
Alarm
ALVL Severity BSC6900 EXP ALMLOG(Optional)
SET ALMLVL(Mandatory)
Alarm SET ALMSCRN(Mandatory)
ALVL Severity BSC6900 SET ENVALMPARA(Optional)
2B event
retry max SET UINTERFREQHOCOV(Optional)
AmntOfRpt2B times BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
3A event
retry max SET UINTERRATHOCOV(Optional)
AmntOfRpt3A times BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3C event
retry max SET UINTERRATHONCOV(Optional)
AmntOfRpt3C times BSC6900 ADD UCELLINTERRATHONCOV(Optional)
RLC AM
mode
parameters
AmRlcCfgPara selection BSC6900 ADD UTYPRABRLC(Mandatory)
QOS
Switch For
AMR
AMRQosPerform Traffic BSC6900 SET UQOSACT(Optional)
Threshold
of AMR
AmrRabAbnormRel Call Drop
RatioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Minimum
Number of
AMR RAB
AmrRabEstabAttMi Establish
nNum Request BSC6900 SET UKPIALMTHD(Optional)
Threshold
of AMR
RAB Setup
AmrRabEstabSucc Successful
RatioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Minimum
Number of
AmrRabRelMinNu AMR Call
m Release BSC6900 SET UKPIALMTHD(Optional)
Wait Timer
For AMR
AmrUlRateAdjTime Uplink
rLen Rate[ms] BSC6900 SET UQOSACT(Optional)
BLK AAL2PATH(Mandatory)
ADD ADJNODE(Mandatory)
ADD AAL2PATH(Mandatory)
ADD AAL2RT(Mandatory)
Adjacent ADD IPPATH(Mandatory)
ANI Node ID BSC6900 ADD ADJMAP(Mandatory)
Adjacent
ANI node ID BSC6900 LOP VCL(Mandatory)
Adjacent
ANI node ID BSC6900 SET VCLLOP(Optional)
Alarm
ANM Name BSC6900 SET ENVALMPARA(Optional)
Cell
AntennaAltitudeMet Antenna
er Altitude[m] BSC6900 ADD USMLCCELL(Optional)
Cell
AntennaAltitudeMet Antenna
erImp Altitude[ft] BSC6900 ADD USMLCCELL(Optional)
Cell
Antenna
Latitude[0.
AntennaLatitudeDe 000001deg
gree ree] BSC6900 ADD USMLCCELL(Optional)
Cell
Antenna
AntennaLatitudeDe Latitude[se
greeSec cond] BSC6900 ADD USMLCCELL(Optional)
Cell
Antenna
Longitude[
AntennaLongitude 0.000001d
Degree egree] BSC6900 ADD USMLCCELL(Optional)
Cell
Antenna
AntennaLongitude Longitude[
DegreeSec second] BSC6900 ADD USMLCCELL(Optional)
Cell
Antenna
Opening[0.
AntennaOpening 1degree] BSC6900 ADD USMLCCELL(Mandatory)
Cell
Antenna
Orientation
AntennaOrientation [0.1degree] BSC6900 ADD USMLCCELL(Mandatory)
E1T1 anti-
error
ANTIERRFLAG switch BSC6900 ADD MPGRP(Optional)
Application
APP type BSC6900 ADD SCTPLNK(Mandatory)
RAB
applied
AppliedDirect direction BSC6900 ADD UTYPRABBASIC(Mandatory)
CMP BRDAREA(Optional)
AREAFLAG Area flag BSC6900 LOD PATCH(Optional)
LOD BRD(Optional)
AREAFLAG Area flag BSC6900 SYN BRDAREA(Optional)
User_priori
ty of
Allocation/
Retention
ARP10Priority priority 10 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP11Priority priority 11 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP12Priority priority 12 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP13Priority priority 13 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP14Priority priority 14 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP1Priority priority 1 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP2Priority priority 2 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP3Priority priority 3 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP4Priority priority 4 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP5Priority priority 5 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP6Priority priority 6 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP7Priority priority 7 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP8Priority priority 8 BSC6900 SET UUSERPRIORITY(Optional)
User_priori
ty of
Allocation/
Retention
ARP9Priority priority 9 BSC6900 SET UUSERPRIORITY(Optional)
ARP
packet
resend
ARPRETRY times BSC6900 STR IPCHK(Optional)
ARP
packet
time-
ARPTIMEOUT out[100ms] BSC6900 STR IPCHK(Optional)
EXP ALMLOG(Optional)
ASS Event Type BSC6900 STA ALMLOG(Optional)
ASS Event Type BSC6900 SET ENVALMPARA(Optional)
NodeB
ATM_TRA
NS Slot
ATMSN No. BSC6900 ADD UNODEBIP(Mandatory)
NodeB
ATM_TRA
NS
Subrack
ATMSRN No. BSC6900 ADD UNODEBIP(Mandatory)
Attach/deta
ch allowed
ATT indication BSC6900 ADD UCNDOMAIN(Optional)
Loop
AUSTOP time[min] BSC6900 SET E1T1LOP(Optional)
Test
AUSTOP time[min] BSC6900 STR E1T1TST(Optional)
Authenticat
AUTHMODE ion Mode BSC6900 SET SSLAUTHMODE(Mandatory)
Validate
AUTHMODE mode BSC6900 ADD PPPLNK(Mandatory)
Validate
AUTHMODE mode BSC6900 ADD MPGRP(Mandatory)
Validate
AUTHNAME user name BSC6900 ADD PPPLNK(Mandatory)
Validate
AUTHNAME user name BSC6900 ADD MPGRP(Mandatory)
Validate
AUTHPWD password BSC6900 ADD PPPLNK(Mandatory)
Validate
AUTHPWD password BSC6900 ADD MPGRP(Mandatory)
Validate
protocol
AUTHTYPE type BSC6900 ADD PPPLNK(Optional)
Validate
protocol
AUTHTYPE type BSC6900 ADD MPGRP(Optional)
Auto
AUTO negotiation BSC6900 SET ETHPORT(Optional)
Auto
Unlock
AUTOULKSW Switch BSC6900 LCK SCHTSK(Optional)
Auto
Unlock
AutoUnlockTime Time BSC6900 SET PWDPOLICY(Optional)
Administrat
ion unit
AUTYPE type BSC6900 SET OPT(Optional)
Available
Availablesignature signature
EndIndex end index BSC6900 ADD UPRACHASC(Optional)
Available
Availablesignature signature
StartIndex start index BSC6900 ADD UPRACHASC(Optional)
Available
subchannel
AvailableSubchann control
elCtrlWord word BSC6900 ADD UPRACHASC(Optional)
Capability
of CN
AvailCap Node BSC6900 ADD UCNNODE(Mandatory)
B1B2
signal fail
B1B2SFTHRD threshold BSC6900 SET OPT(Optional)
B3 signal
degrade
B3SDTHRD threshold BSC6900 SET OPT(Optional)
B3 signal
fail
B3SFTHRD threshold BSC6900 SET OPT(Optional)
Switch of
backplane
BACK8KCLKSW1 LINE1 BSC6900 SET CLK(Optional)
Switch of
backplane
BACK8KCLKSW2 LINE2 BSC6900 SET CLK(Optional)
Backgroun
BackgroundNoise d noise BSC6900 ADD UCELLCAC(Optional)
Backup
BackupPath Path BSC6900 BKP LOGDB(Optional)
Path of
Backup
BACKUPPATH File BSC6900 BKP DB(Optional)
Backup
port IP
BAKIP address BSC6900 STR IPCHK(Optional)
Backup
BAKMASK port mask BSC6900 STR IPCHK(Optional)
Band
BandInd indicator BSC6900 ADD UEXT3GCELL(Mandatory)
Inter-RAT
cell
frequency
band
BandInd indicator BSC6900 ADD UEXT2GCELL(Optional)
BandWidthForFAC Bandwidth
H of Fach BSC6900 SET UFACHBANDWIDTH(Optional)
BS color
BCC code BSC6900 ADD UEXT2GCELL(Mandatory)
Inter-RAT
cell
frequency
BcchArfcn number BSC6900 ADD UEXT2GCELL(Mandatory)
BCCH HS-
BcchHspdschPowe PDSCH
r power BSC6900 ADD UCELLEFACH(Optional)
BCCH HS-
SCCH
BcchHsscchPower power BSC6900 ADD UCELLEFACH(Optional)
BCH
transmit
power[0.1d
BCHPower B] BSC6900 ADD UBCH(Optional)
DSP bear
BEARTYPE type BSC6900 ADD N7DPC(Mandatory)
HeatBeat
Lost Times
BeatDectThred Threshold BSC6900 ADD URNCPOOL(Optional)
HeatBeat
Recover
Times
BeatRecvrThred Threshold BSC6900 ADD URNCPOOL(Optional)
HeatBeat
Sending
Time
BeatSendingDis Interval BSC6900 ADD URNCPOOL(Optional)
BE service
handover
rate
threshold[k
BeBitRateThd bit/s] BSC6900 SET UHOCOMM(Optional)
BE CPC to
E_FACH
BeCpc2EFachStat Transition
eTransTimer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE CPC to
FACH
BeCpc2FStateTran Transition
sTimer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE DCH to
E_FACH
BeD2EFachStateTr Transition
ansTimer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE DCH to
FACH
BeD2FStateTransT Transition
imer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
First Action
For BE
Downlink
BeDlAct1 QOS BSC6900 SET UQOSACT(Optional)
Second
Action For
BE
Downlink
BeDlAct2 QOS BSC6900 SET UQOSACT(Optional)
Third
Action For
BE
Downlink
BeDlAct3 QOS BSC6900 SET UQOSACT(Optional)
BE E-DCH
To FACH
State
BeE2FStateTransTi Transition
mer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE
E_FACH2
CPC 4A
BeEFach2CpcTvm Threshold[
Thd byte] BSC6900 SET UUESTATETRANS(Optional)
BE
E_FACH2
BeEFach2CpcTvm CPC 4A
TimeToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE
E_FACH2
D 4A
BeEFach2DTvmTh Threshold[
d byte] BSC6900 SET UUESTATETRANS(Optional)
BE
E_FACH2
BeEFach2DTvmTi D 4A
BE
meToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
E_FACH2
HS-DSCH
4A
BeEFach2HTvmTh Threshold[
d byte] BSC6900 SET UUESTATETRANS(Optional)
BE
E_FACH2
HS-DSCH
BeEFach2HTvmTi 4A
meToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE
F2CPC_E-
DCH 4A
Threshold[
BeF2CpcETvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE
FACH2CP
C_E-DCH
BeF2CpcETvmTim 4A
BE
eToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
F2CPC_H
S-DSCH
4A
Threshold[
BeF2CpcHTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE
F2CPC_H
S-DSCH
BeF2CpcHTvmTim 4A
eToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE F/R2D
4A
Threshold[
BeF2DTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE F/R2D
BeF2DTvmTimeTo 4A
Trig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE F2E-
DCH 4A
Threshold[
BeF2ETvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE F2E-
BeF2ETvmTimeTo DCH 4A
Trig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE F2HS-
DSCH 4A
Threshold[
BeF2HTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE F2HS-
BeF2HTvmTimeTo DSCH 4A
Trig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE FACH
or E_FACH
to PCH
BeF2PStateTransTi Transition
mer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE HSPA
to E_FACH
BeH2EFachStateTr Transition
ansTimer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE HS-
DSCH to
FACH
BeH2FStateTransT Transition
imer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
BE HS-
DSCH2F
4B
Pending
BeH2FTvmPTAT Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE HS-
DSCH2F
4B
Threshold[
BeH2FTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE HS-
DSCH2F
BeH2FTvmTimeTo 4B
Rate
Trig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
threshold
of BE on
2ms TTI of
BeHsupa2msTtiRat HSUPA[kbi
eThs t/s] BSC6900 SET UFRC(Optional)
Timer For
BEInterIurRateUpTi BE Inter Iur
mer Rate[s] BSC6900 SET UQOSACT(Optional)
BE Event F
Reporting
Power
Margin[0.1 ADD UCELLDCCC(Optional)
BePwrMargin dB] BSC6900 SET UDCCC(Optional)
QOS
Switch For
BEQosPerform BE Traffic BSC6900 SET UQOSACT(Optional)
Reference
BetaC BetaC BSC6900 ADD UTYPRABBASIC(Mandatory)
Reference
BetaD BetaD BSC6900 ADD UTYPRABBASIC(Mandatory)
First Action
For BE
Uplink
BeUlAct1 QOS BSC6900 SET UQOSACT(Optional)
Second
Action For
BE Uplink
BeUlAct2 QOS BSC6900 SET UQOSACT(Optional)
Third
Action For
BE Uplink
BeUlAct3 QOS BSC6900 SET UQOSACT(Optional)
Indicator
For BE
Uplink
BeUlEvTrigInd QOS Event BSC6900 SET UQOSACT(Optional)
Measurem
BeUlQos5AMcSwit ent Of 5A
ch Switch BSC6900 SET UQOSACT(Optional)
Measurem
BeUlQos6A1McSwi ent Of 6A1
tch Switch BSC6900 SET UQOSACT(Optional)
Measurem
BeUlQos6DMcSwit ent Of 6D
ch Switch BSC6900 SET UQOSACT(Optional)
Wait Timer
For BE
BeUlRateAdjTimer Uplink
Len Rate[ms] BSC6900 SET UQOSACT(Optional)
Detect
multiplier of
BFDDETECTCOU BFD
NT packet BSC6900 STR IPCHK(Optional)
Backgroun
d MAC-c
BGGBR flow GBR BSC6900 ADD UCELLEFACH(Optional)
Backgroun
d MAC-c
BGMBR flow MBR BSC6900 ADD UCELLEFACH(Optional)
Backgroun
d noise
abnormal
BgnAbnormalThd threshold BSC6900 ADD UCELLCAC(Optional)
Backgroun
d noise
update
BGNAdjustTimeLe continuanc
n e Time BSC6900 ADD UCELLCAC(Optional)
Backgroun
d noise
Equivalent
update end
user
BgnEndTime time BSC6900 ADD UCELLCAC(Mandatory)
number
threshold
for
BGNEqUserNumTh backgroun
d d noise BSC6900 ADD UCELLCAC(Optional)
Backgroun
d noise
update
Auto-
BgnStartTime start time BSC6900 ADD UCELLCAC(Mandatory)
adaptive
backgroun
d noise
update
BGNSwitch switch BSC6900 ADD UCELLCAC(Optional)
Backgroun
d noise
update
trigger
BgnUpdateThd threshold BSC6900 ADD UCELLCAC(Optional)
Target
value of
service
DCH_BLE
BLERQuality R BSC6900 ADD UTYPRABOLPC(Mandatory)
Blind
Intrafreque
handover ADD UINTERFREQNCELL(Optional)
ncy
BlindHoFlag flag BSC6900 ADD U2GNCELL(Optional)
measurem
ent report
amount of
Intrafreque
BlindHOIntrafreqM blind
ncy
RAmount handover BSC6900 SET UINTRAFREQHO(Optional)
measurem
ent report
interval of
BlindHOIntrafreqM blind
RInterval HO[ms] BSC6900 SET UINTRAFREQHO(Optional)
Blind
handover
BlindHOPrio Priority BSC6900 ADD U2GNCELL(Mandatory)
Blind
handover
BlindHOQualityCon condition[d
1F event
dition Bm] BSC6900 ADD UINTERFREQNCELL(Optional)
blind
handover
trigger
BlindHORSCP1FT condition[d SET UINTRAFREQHO(Optional)
hreshold Bm] BSC6900 ADD UCELLINTRAFREQHO(Optional)
Alarm
switch of
blinking
BLKFILTERSW filter BSC6900 SET ALMBLKSW(Optional)
Alarm blink
BLKPRD threshold BSC6900 SET ALMBLKPARA(Optional)
Observing
time
window of
statistical
BLKSTATPRD alarm BSC6900 SET ALMBLKSW(Optional)
Switch of
statistics
blinking
BLKSTATSW alarm BSC6900 SET ALMBLKSW(Optional)
Blocking
request
BLOREQTMR timer BSC6900 SET AAL2TMR(Optional)
To Alarm
BOXFLG Box Flag BSC6900 SET BOXRPT(Mandatory)
Board
BRDCLASS Class BSC6900 STR BKP(Mandatory)
SET FCSW(Mandatory)
SET FCCPUTHD(Mandatory)
Board SET FCMSGQTHD(Mandatory)
BRDCLASS Class BSC6900 SET CPUTHD(Mandatory)
Board
BRDCLASS Class BSC6900 ADD BRD(Mandatory)
Board
BRDTYPE Type BSC6900 ADD BRD(Optional)
ADD MPGRP(Mandatory)
BRDTYPE Board type BSC6900 ADD MPLNK(Mandatory)
Backup
BS Style BSC6900 BKP LOGDB(Optional)
SET UINTERRATHOCOV(Optional)
SET UINTERRATHONCOV(Optional)
ADD UCELLINTERRATHOCOV(Optional)
BSIC verify ADD UCELLINTERRATHONCOV(Optional)
BSICVerify switch BSC6900 ADD UCELLMBDRINTERRAT(Optional)
LOD PATCH(Mandatory)
BT Board type BSC6900 LOD BRD(Mandatory)
SET E1T1LOP(Mandatory)
BT Board type BSC6900 SET E1T1(Mandatory)
BT Board type BSC6900 LOP E1T1(Mandatory)
Board
BT Type BSC6900 ADD IMAGRP(Mandatory)
Board
BT Type BSC6900 SET COPTLNK(Mandatory)
Board
BT Type BSC6900 ADD IPLOGICPORT(Mandatory)
Bundling
BUNDLINGFLAG Flag BSC6900 ADD SCTPLNK(Optional)
Auto adjust
bandwidth
BWADJ switch BSC6900 ADD IPLOGICPORT(Mandatory)
Backward
congestion
remain
BWDCONGBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
Backward
congestion
clear
BWDCONGCLRB remain
W bandwidth BSC6900 ADD TRMLOADTH(Optional)
Backward
congestion
clear
remain
BWDCONGCLRTH ratio BSC6900 ADD TRMLOADTH(Optional)
Backward
congestion
remain
Backward
BWDCONGTH ratio BSC6900 ADD TRMLOADTH(Optional)
overload
congestion
clear
BWDOVLDCLRRS remain
Backward
VBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
overload
congestion
clear
remain
BWDOVLDCLRTH ratio BSC6900 ADD TRMLOADTH(Optional)
Backward
overload
congestion
remain
BWDOVLDRSVBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
Backward
overload
congestion
remain
BWDOVLDTH ratio BSC6900 ADD TRMLOADTH(Optional)
Backward
handover
reserved
BWDRESVHOTH ratio BSC6900 ADD TRMLOADTH(Optional)
Backward
handover
reserved
BWDRSVHOBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
Max
bandwidth
estimate
BWMAXRATIO ratio [%] BSC6900 ADD IPLOGICPORT(Optional)
Bandwidth
BWMODE Mode BSC6900 ADD RSCGRP(Mandatory)
Load
Control
algorithm
BandWidth
BWRTPTH THD[%] BSC6900 ADD IPLOGICPORT(Optional)
CAC
algorithm
CacSwitch switch BSC6900 SET UCACALGOSWITCH(Optional)
Call Shock
CallShockCtrlSwitc Control
h Switch BSC6900 SET UCALLSHOCKCTRL(Optional)
Call Shock
Judge
CallShockJudgePer Period time
iod length BSC6900 SET UCALLSHOCKCTRL(Optional)
Indicator of
Carrier
Type
CarrierTypePriorInd Priority BSC6900 SET UUSERPRIORITY(Optional)
Bearing
subrack
CARRYF No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
CARRYFRAATML FRAATM
NKN link No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
CARRYFRAATML FRAATM
NKN link No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
CARRYFRAATML FRAATM
NKN link No. BSC6900 ADD IPOAPVC(Optional)
CARRYFRAATML FRAATM
NKN link No. BSC6900 ADD ATMLOGICPORT(Optional)
Bearing
IMA group
CARRYIMAGRPN No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
IMA group
CARRYIMAGRPN No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
IMA group
CARRYIMAGRPN No. BSC6900 ADD IPOAPVC(Optional)
IMA group
CARRYIMAGRPN No. BSC6900 ADD ATMLOGICPORT(Optional)
Bearing ADD UCCP(Mandatory)
CARRYLNKT link type BSC6900 ADD UNCP(Mandatory)
Bearing
NCOPT
CARRYNCOPTN port No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
NCOPT
CARRYNCOPTN port No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
NCOPT
CARRYNCOPTN port No. BSC6900 ADD IPOAPVC(Mandatory)
Optical port
CARRYPN No. BSC6900 ADD ATMLOGICPORT(Optional)
Bearing
CARRYSN slot No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
CARRYSN slot No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
subrack
CARRYSRN No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
CARRYT type BSC6900 ADD SAALLNK(Mandatory)
Bearing
CARRYT type BSC6900 ADD AAL2PATH(Mandatory)
Bearing
CARRYT type BSC6900 ADD IPOAPVC(Mandatory)
The
bearing
type of the
CARRYT logic port BSC6900 ADD ATMLOGICPORT(Mandatory)
The
bearing
type of the
CARRYT logic port BSC6900 ADD IPLOGICPORT(Optional)
Carry port
CARRYT type BSC6900 STR IPCHK(Optional)
Bearing
UNI link
CARRYUNILNKN No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
UNI link
CARRYUNILNKN No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
UNI link
CARRYUNILNKN No. BSC6900 ADD IPOAPVC(Optional)
Bearing
UNI link
CARRYUNILNKN No. BSC6900 ADD ATMLOGICPORT(Optional)
Bearing
CARRYVCI VCI BSC6900 ADD SAALLNK(Mandatory)
Bearing
CARRYVCI VCI BSC6900 ADD IPOAPVC(Optional)
Bearing
CARRYVPI VPI BSC6900 ADD SAALLNK(Mandatory)
Bearing
CARRYVPI VPI BSC6900 ADD IPOAPVC(Optional)
Bearing
ATM logic
CARRYVPN port No. BSC6900 ADD SAALLNK(Mandatory)
Bearing
ATM logic
CARRYVPN port No. BSC6900 ADD AAL2PATH(Mandatory)
Bearing
ATM logic
CARRYVPN port No. BSC6900 ADD IPOAPVC(Mandatory)
CBS CBC
CBCIPADDR IP address BSC6900 ADD UCBSADDR(Mandatory)
Subnet
CBCMASK mask BSC6900 ADD UCBSADDR(Mandatory)
Consent
burst size
CBS [Byte] BSC6900 ADD IPLOGICPORT(Optional)
CBS
control
CBSCTHD threshold BSC6900 SET FCCPUTHD(Optional)
CBS
control
CBSCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
CBS
Operator
CBSOpIndex Index BSC6900 ADD UCELLQUICKSETUP(Mandatory)
CBS
restore
CBSRTHD threshold BSC6900 SET FCCPUTHD(Optional)
CBS
restore
CBSRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
CBS flow
control
CBSSW switch BSC6900 SET FCSW(Optional)
CBSwitch CB Switch BSC6900 SET URNCCBPARA(Optional)
Certificate
Chain File
Enabled
CCAEnableSta State BSC6900 SET CERTFILE(Optional)
CCCH
MAC-c flow
CCCHGBR GBR BSC6900 ADD UCELLEFACH(Optional)
CCCH
MAC-c flow
CCCHMBR MBR BSC6900 ADD UCELLEFACH(Optional)
Common
channel
primary
CCHPRIPATH path BSC6900 ADD TRMMAP(Optional)
Common
channel pri
path load
CCHPRITH threshold BSC6900 ADD LOADEQ(Optional)
Common
channel
secondary
CCHSECPATH path BSC6900 ADD TRMMAP(Optional)
Common
channel pri
sec path
load ratio
CCHSECWHT threshold BSC6900 ADD LOADEQ(Optional)
CCM Send
CCMINTERVAL Prid BSC6900 ADD ETHMA(Optional)
Cell delay
variation
CDVT tolerance BSC6900 ADD ATMTRF(Optional)
AMR_RRC
Number
per Second
CellAmrRrcNum for Cell BSC6900 SET UCALLSHOCKCTRL(Optional)
Cell
Average
CellAverageHeight Altitude[m] BSC6900 ADD USMLCCELL(Optional)
Cell
CellAverageHeightI Average
mp Altitude[ft] BSC6900 ADD USMLCCELL(Optional)
Cell
Capability
Auto
CellCapacityAutoH Handle
andleSwitch Switch BSC6900 ADD UCELLALGOSWITCH(Optional)
Cell
CellCapContainerF capability
dd container BSC6900 ADD UEXT3GCELL(Mandatory)
Cell Center
CellCenterAltitude Altitude[m] BSC6900 ADD USMLCCELL(Optional)
Cell Center
CellCenterLatitude Latitude[se
Sec cond] BSC6900 ADD USMLCCELL(Optional)
Cell Center
Longitude[
CellCenterLongitud 0.000001d
e egree] BSC6900 ADD USMLCCELL(Optional)
Cell Center
CellCenterLongitud Longitude[
eSec second] BSC6900 ADD USMLCCELL(Optional)
Target cell
CellChoice choice BSC6900 HO UCELL(Mandatory)
Cell
Environme
CellEnvironment nt Case BSC6900 ADD USMLCCELL(Optional)
ADD UCELLRLPWR(Mandatory)
ADD UCELLSELRESEL(Mandatory)
ADD UPRACHACTOASCMAP(Mandatory)
ADD URESERVEOVSF(Mandatory)
ADD UAICH(Mandatory)
ADD UBCH(Mandatory)
ADD UCELLCBSDRX(Mandatory)
ADD UCELLDYNSHUTDOWN(Mandatory)
Cell ADD UCELLEFACH(Mandatory)
environme ADD UCELLHSDPA(Mandatory)
CellEnvType nt type BSC6900 ADD UCELLHSUPA(Mandatory)
ADD UCELLCAC(Optional)
Cell
Altitude ADD UCELLMBMSFACH(Mandatory)
Standard ADD UCELLMBMSPARA(Mandatory)
Deviation[ ADD UCELLMBMSSA(Mandatory)
CellHeightStd m] BSC6900 ADD
ADD UCELLMBMSSCCPCH(Mandatory)
USMLCCELL(Optional)
Cell ADD UCELLMCCH(Mandatory)
Altitude ADD UCELLSETUP(Mandatory)
Standard ADD UCELLSIBSWITCH(Mandatory)
Deviation[ft ADD UCELLURA(Mandatory)
CellHeightStdImp ] BSC6900 ADD
ADD USMLCCELL(Optional)
UCHPWROFFSET(Mandatory)
HiPri_RRC ADD UCTCH(Mandatory)
Number ADD UFACH(Mandatory)
per Second ADD UFACHDYNTFS(Mandatory)
CellHighPriRrcNum for Cell BSC6900 ADD UFACHLOCH(Mandatory)
SET UCALLSHOCKCTRL(Optional)
ADD UPCCPCH(Mandatory)
ADD UPCH(Mandatory)
ADD UPCHDYNTFS(Mandatory)
Cell Host ADD UPCPICH(Mandatory)
CellHostType Type BSC6900 ADD
ADD UEXT3GCELL(Optional)
UPICH(Mandatory)
ADD UPRACHASC(Mandatory)
ADD UPRACHBASIC(Mandatory)
ADD UPRACHSLOTFORMAT(Mandatory)
CellId Cell ID BSC6900 ADD UPRACHTFC(Mandatory)
GPS(Mandatory)
ADD UPSCH(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD URACH(Mandatory)
ADD UCELLRLACTTIME(Mandatory)
ADD URACHDYNTFS(Mandatory)
CellId Cell ID BSC6900 ADD UCELLCBSSAC(Mandatory)
ADD USCCPCHBASIC(Mandatory)
ADD USCCPCHTFC(Mandatory)
HO UCELL(Mandatory)
ADD
ADD USSCH(Mandatory)
UINTRAFREQNCELL(Mandatory)
BLK
ADD UCELL(Mandatory)
UINTERFREQNCELL(Mandatory)
CellId Cell ID BSC6900 CHK
ADD UCELL(Mandatory)
UCELLINTRAFREQHO(Mandatory)
ADD UCELLCMCF(Mandatory)
ADD UCELLHOCOMM(Mandatory)
ADD
CellId Cell ID BSC6900 UCELLINTERFREQHOCOV(Mandatory)
ADD USMLCCELL(Mandatory)
ADD
UCELLINTERFREQHONCOV(Mandatory)
ADD UCELLDRD(Mandatory)
ADD UCELLINTERRATHOCOV(Mandatory)
ADD UCELLFRC(Mandatory)
ADD
CellId Cell ID BSC6900 ADD UCELLREDIRECTION(Mandatory)
UCELLINTERRATHONCOV(Mandatory)
ADD UCELLHCSHO(Mandatory)
ADD UCELLQOSHO(Mandatory)
ADD UCELLMBDRINTERFREQ(Mandatory)
CellId Cell ID BSC6900 ADD UCELLMBDRINTERRAT(Mandatory)
Cell ID of
Neighborin
CellId g RNC BSC6900 ADD UEXT3GCELL(Mandatory)
CellId Cell ID BSC6900 ADD U2GNCELL(Mandatory)
Cell ID
Changing
Period time
CellIDChgPeriod length BSC6900 SET UCIDCHG(Optional)
Cell ID
Changing
CellIDChgSwitch Switch BSC6900 SET UCIDCHG(Optional)
CELLID+R
CellidRttActivateFla TT Method
g Active Flag BSC6900 ADD USMLCCELL(Optional)
CELLID+R
CELLIDRTTMethod TT Method
Type Type BSC6900 SET USMLC(Optional)
Cell LDR
SF
reserved
CellLdrSfResThd threshold BSC6900 ADD UCELLLDR(Optional)
Cell
Location
Setting
CellLocCfgType Type BSC6900 ADD USMLCCELL(Mandatory)
ADD UEXT3GCELL(Mandatory)
ADD UCELLSETUP(Mandatory)
CellName Cell name BSC6900 ADD UCELLQUICKSETUP(Mandatory)
Cell
overload
CellOverrunThd threshold BSC6900 ADD UCELLLDB(Optional)
Cell
Reselectio
CellReSelectCount n Counter
er Threshold BSC6900 SET UUESTATETRANS(Optional)
Cell
Reselectio
CellReSelectTimer n Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
Cell
CellReservationExt reservation
ension extension BSC6900 ADD UCELLACCESSSTRICT(Optional)
Cell
reserved
for
CellReservedForO operator
peratorUse use BSC6900 ADD UCELLACCESSSTRICT(Optional)
Affect 1A
threshold
CellsForbidden1A flag BSC6900 ADD UINTRAFREQNCELL(Optional)
Affect 1B
threshold
CellsForbidden1B flag BSC6900 ADD UINTRAFREQNCELL(Optional)
Cell Call
Shock
CellTotalRrcNumTh Trigger
d Threshold BSC6900 SET UCALLSHOCKCTRL(Optional)
Cell under
load
CellUnderrunThd threshold BSC6900 ADD UCELLLDB(Optional)
Cell URA
update
control
CELLURACTHD threshold BSC6900 SET FCCPUTHD(Optional)
Cell URA
update
control
CELLURACTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Cell URA
update
restore
CELLURARTHD threshold BSC6900 SET FCCPUTHD(Optional)
Cell URA
update
restore
CELLURARTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Cell URA
update flow
control
CELLURASW switch BSC6900 SET FCSW(Optional)
Certificate
Chain File
CertChain Name BSC6900 SET CERTFILE(Mandatory)
RAC
Configurati
on ADD UEXT3GCELL(Mandatory)
CfgRacInd Indication BSC6900 ADD UEXT2GCELL(Mandatory)
RAC
Configurati
on ADD UCELLSETUP(Mandatory)
CfgRacInd Indication BSC6900 ADD UCELLQUICKSETUP(Mandatory)
Channel
configurati
on strategy
CfgSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
Confirm
CFM Password BSC6900 ADD OP(Mandatory)
Command
CG Group BSC6900 ADD OP(Optional)
Command
Group
CGN Name BSC6900 SET CCGN(Optional)
Channel
Retry Ho
ChannelRetryHoTi Timer
merLen Length[s] BSC6900 SET UCOIFTIMER(Optional)
Channel
Retry
ChannelRetryTimer Timer
Len Length[s] BSC6900 SET UCOIFTIMER(Optional)
Channel
ChCodingType code type BSC6900 ADD UFACH(Optional)
Ping Check
Timeout
CHECKCOUNT Counts BSC6900 ADD IPPATH(Optional)
Channel
ChIdx Index BSC6900 SET UMBMSPERF(Mandatory)
Check
CHKN Index BSC6900 STR IPCHK(Optional)
Check
CHKN Index BSC6900 ADD IPPATHBIND(Mandatory)
Calculate
checksum
when
receive
CHKSUMRX message BSC6900 ADD SCTPLNK(Optional)
Calculate
checksum
when send
CHKSUMTX message BSC6900 ADD SCTPLNK(Optional)
Checksum
CHKSUMTYPE arithmetic BSC6900 ADD SCTPLNK(Optional)
Channel
ChSwitch Switch BSC6900 SET UMBMSPERF(Mandatory)
GSM cell
CID ID BSC6900 ADD UEXT2GCELL(Mandatory)
Cell
oriented
Cell
Individual
CIO Offset[dB] BSC6900 ADD UEXT3GCELL(Optional)
Cell
Individual
Cell
CIO Offset[dB] BSC6900 ADD UEXT2GCELL(Optional)
oriented
Cell
Individual
Offset[0.5d
CIO B] BSC6900 ADD UCELLSETUP(Optional)
Neighborin
g cell
oriented ADD UINTRAFREQNCELL(Optional)
CIOOffset CIO[dB] BSC6900 ADD UINTERFREQNCELL(Optional)
Neighborin
g cell
oriented
CIOOffset CIO[dB] BSC6900 ADD U2GNCELL(Optional)
Bandwidth
CIR [64kbps] BSC6900 ADD IPLOGICPORT(Optional)
Error clear
CLEARTHD threshold BSC6900 ADD MPGRP(Optional)
Clock
CLKTYPE board type BSC6900 SET CLKTYPE(Mandatory)
Alarm
Cleared EXP ALMLOG(Optional)
CLRFLG Flag BSC6900 STA ALMLOG(Optional)
Closed
loop time
adjust
mode
CLTAModeInd indication BSC6900 ADD UCELLSETUP(Optional)
Compressi
on mode
CmCap capability BSC6900 ADD UNODEBLMTPARA(Optional)
CMCF
algorithm
CmcfSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
CMCH
RSRC
response
CmchRsrcRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Command
CMD Name BSC6900 EXP LOG(Optional)
Command
CMD Name BSC6900 ADD CCG(Mandatory)
Command
CMDSEQ Sequence BSC6900 ADD SUBCMD(Mandatory)
Compatibili
CmpSwitch ty switch BSC6900 SET UCORRMALGOSWITCH(Optional)
Cabinet
CN No. BSC6900 ADD CAB(Mandatory)
CN domain
CNDomainId ID BSC6900 ADD UTYPRABBASIC(Mandatory)
CN domain
CNDomainId ID BSC6900 ADD UCELLRLPWR(Mandatory)
SET UIUTIMERANDNUM(Mandatory)
ADD UCNNODE(Mandatory)
CN node ADD UNRIGLBCNIDMAP(Mandatory)
CNId ID BSC6900 ADD UIMSIIDNNSCNIDMAP(Mandatory)
Status of
CNLoadStatus CN Node BSC6900 ADD UCNNODE(Mandatory)
Resource
Manageme
CNMNGMODE nt Mode BSC6900 ADD ADJMAP(Mandatory)
CNOPERATORIND Operator
EX Index BSC6900 CMP LICENSE(Optional)
Cn
CNOPERATORIND Operator
EX Index BSC6900 SET LICENSE(Optional)
Cn
Operator
CnOperatorName Name BSC6900 ADD UCNOPERATOR(Mandatory)
Cn
Operator ADD UCNOPERGROUP(Mandatory)
Group ADD UCELLSETUP(Mandatory)
CnOpGrpIndex Index BSC6900 ADD UCELLQUICKSETUP(Mandatory)
CN
Operator
Group
CnOpGrpIndex Index BSC6900 ADD UEXT3GCELL(Mandatory)
ADD UCELLCBSSAC(Mandatory)
SET UIUTIMERANDNUM(Mandatory)
CN ADD UCNNODE(Mandatory)
Operator ADD UNRIGLBCNIDMAP(Mandatory)
Group ADD UIMSIIDNNSCNIDMAP(Mandatory)
CnOpGrpIndex Index BSC6900 ADD
ADD UEXT2GCELL(Mandatory)
UCNOPERATOR(Mandatory)
Cn ADD URNCCBCPUID(Mandatory)
Operator SET UOPERATORCFGPARA(Mandatory)
Group ADD UCZ(Mandatory)
CnOpGrpName Name BSC6900 ADD UCBSADDR(Mandatory)
UCNOPERGROUP(Mandatory)
ADD UCELLMBMSSA(Mandatory)
ADD UCNOPALLCELLBLK(Mandatory)
CN
ADD ULAC(Mandatory)
Operator ADD RSCGRP(Mandatory)
ADD UMBMSSA(Mandatory)
CNOPINDEX index BSC6900 ADD ADJMAP(Mandatory)
ADD UNODEB(Mandatory)
ADD URAC(Mandatory)
Cn ADD USAC(Mandatory)
Operator ADD USAMBMSPARA(Mandatory)
CnOpIndex Index BSC6900 ADD UURA(Mandatory)
Cn
Operator
CnOpIndex Index BSC6900 ADD UNRNCURA(Mandatory)
CN
Operator ADD
CnOpIndex index BSC6900 UCELLDSACMANUALPARA(Mandatory)
CN
operator ADD ATMLOGICPORT(Optional)
CNOPINDEX index BSC6900 ADD IPLOGICPORT(Optional)
Operator 1
CnOpIndex1 Index BSC6900 ADD UCNOPERGROUP(Mandatory)
Operator 2
CnOpIndex2 Index BSC6900 ADD UCNOPERGROUP(Mandatory)
Operator 3
CnOpIndex3 Index BSC6900 ADD UCNOPERGROUP(Mandatory)
Operator 4
CnOpIndex4 Index BSC6900 ADD UCNOPERGROUP(Mandatory)
Common
Operator
CnOpIndexComm Index BSC6900 ADD UCNOPERGROUP(Optional)
Operator
CnOpNum Number BSC6900 ADD UCNOPERGROUP(Mandatory)
CN
protocol
CNProtclVer version BSC6900 ADD UCNNODE(Mandatory)
Records to
CNT Return BSC6900 EXP ALMLOG(Optional)
Counts
CNTL Limit BSC6900 SET LOGLIMIT(Optional)
Upper
count
threshold
of raised
CNTRISTHRD fault BSC6900 SET ALMBLKPARA(Optional)
Lower
count
threshold
of raised
CNTSTLTHRD fault BSC6900 SET ALMBLKPARA(Optional)
Code
Adjust
CodeAdjForHsdpa Switch for
Switch HSDPA BSC6900 ADD UCELLHSDPA(Optional)
User
Number for
Code
Code
CodeAdjForHsdpa Adjust for
occupied
UserNumThd HSDPA BSC6900 ADD UCELLHSDPA(Optional)
rate
threshold
for code
Code
CodeBalancingDrd balancing
occupied
CodeRateThd drd[%] BSC6900 ADD UCELLDRD(Optional)
rate
threshold
for code
CodeBalancingDrd balance
Minimum
CodeRateThd drd[%] BSC6900 SET UDRD(Optional)
SF
threshold
for code
CodeBalancingDrd balance
Minimum
MinSFThd drd BSC6900 ADD UCELLDRD(Optional)
SF
threshold
for code
CodeBalancingDrd balance
MinSFThd drd BSC6900 SET UDRD(Optional)
Code
balance
CodeBalancingDrd DRD
Switch switch BSC6900 ADD UCELLDRD(Optional)
Code
CodeBalancingDrd balance
Switch drd switch BSC6900 SET UDRD(Optional)
Code
congestion
select
CodeCongSelInter inter-freq
FreqHoInd indication BSC6900 ADD UCELLLDR(Optional)
Code
CodeScheme Scheme BSC6900 SET URNCCBPARA(Optional)
InterFreq
Coding
and
CodingRate rate BSC6900 ADD UFACH(Optional)
InterRat
coexist
measure
CoexistMeasThdCh threshold SET UHOCOMM(Optional)
oice choice BSC6900 ADD UCELLHOCOMM(Optional)
Combine
Neighbour
Cell
Comb
CombNCellPercent Percent[%] BSC6900 SET URNCMBMSPARA(Optional)
Event F
Reporting
Power
Margin[0.1 ADD UCELLDCCC(Optional)
CombPwrMargin dB] BSC6900 SET UDCCC(Optional)
2G Cell
Load
Measurem
CommonMeasurem ent Report
entPeriod Period BSC6900 SET UMBSCCRRM(Optional)
Comm
CommPlmnUsingT Plmn Using SET
ype Type BSC6900 UOPERATORSHARINGMODE(Optional)
Password
Complicacy Complexity BSC6900 SET PWDPOLICY(Optional)
Cell barred
indicator
ConnCellBarred for SIB4 BSC6900 ADD UCELLACCESSSTRICT(Mandatory)
RRC
ConnectFailRrcRed redirect
irSwitch switch BSC6900 SET UDRD(Optional)
Intra-freq
cell
reselection
ConnIntraFreqRese ind for
lection SIB4 BSC6900 ADD UCELLACCESSSTRICT(Optional)
Connect
power
monitoring
CONNPWR board BSC6900 ADD SUBRACK(Optional)
Hysteresis
1 for
connect
ConnQhyst1s mode[2dB] BSC6900 ADD UCELLSELRESEL(Optional)
Hysteresis
2 for
connect
ConnQhyst2s mode[2dB] BSC6900 ADD UCELLSELRESEL(Optional)
Connection
CONNTYPE Type BSC6900 SET CONNTYPE(Mandatory)
Constant
value for
calculating
initial TX
Constantvalue power[dB] BSC6900 ADD UPRACHBASIC(Optional)
Continue
CONTPING ping or not BSC6900 PING IP(Optional)
Downlink
MBR of
Conversati
ConverDlMBR on[kbit/s] BSC6900 SET UUSERMBR(Optional)
Uplink
MBR of
Conversati
ConverUlMBR on[kbit/s] BSC6900 SET UUSERMBR(Optional)
Conversati
onal MAC-
CONVGBR c flow GBR BSC6900 ADD UCELLEFACH(Optional)
Conversati
onal MAC-
Max Mode
CONVMBR c flow MBR BSC6900 ADD UCELLEFACH(Optional)
Of
Narrowban
d AMRC
For Copper SET UAMRC(Optional)
Max Mode
CopperMaxMode Users BSC6900 ADD UCELLAMRC(Optional)
Of
Wideband
AMRC For
Copper SET UAMRCWB(Optional)
CopperMaxMode Users BSC6900 ADD UCELLAMRCWB(Optional)
Send PKT
Count Count BSC6900 PING MAC(Optional)
Count-C
CountCThreshold threshold BSC6900 SET UCNTCHK(Mandatory)
Counter
CounterCheckSwitc check
h switch BSC6900 SET UCNTCHK(Optional)
CP1
support
CP1SupInd indicator BSC6900 ADD UEXT3GCELL(Optional)
CP1
support
CP1SupInd indicator BSC6900 ADD UCELLSETUP(Mandatory)
Call page
control
CPAGECTHD threshold BSC6900 SET FCCPUTHD(Optional)
Call page
restore
CPAGERTHD threshold BSC6900 SET FCCPUTHD(Optional)
CPUS
traffic
share
CPUSShareThd threshold BSC6900 SET UCPUSSHARETHD(Optional)
CQI
Activity
Timer[subfr
CqiDtxTimer ame] BSC6900 SET UDTXDRXPARA(Optional)
CQI
Feedback
Cycke in
CQIFbCkinInDTXD DTX-DRX
RXmode mode[ms] BSC6900 SET UDTXDRXPARA(Optional)
Certificate
Revocation
List File
CRL Name BSC6900 SET CERTFILE(Mandatory)
Certificate
Revocation
List File
CRLEnableSta State BSC6900 SET CERTFILE(Optional)
Max
number of
cell
CRMaxNum reselection BSC6900 ADD UCELLHCS(Optional)
Cross IP
address
available
CROSSIPFLAG flag BSC6900 ADD SCTPLNK(Optional)
Call RRC
conn share
CPU
CRRCCONNCCPU control
THD threshold BSC6900 SET SHARETHD(Optional)
Call RRC
conn share
msg
CRRCCONNCMS control
GTHD threshold BSC6900 SET SHARETHD(Optional)
Call RRC
conn share
CPU
CRRCCONNRCPU restore
THD threshold BSC6900 SET SHARETHD(Optional)
Call RRC
conn share
msg
CRRCCONNRMS restore
UMTS R99
GTHD threshold BSC6900 SET SHARETHD(Optional)
CS
conversatio
nal service
downlink
CSCONVDL factor BSC6900 ADD TRMFACTOR(Optional)
R99 CS
conversatio
nal primary
CSCONVPRIPATH path BSC6900 ADD TRMMAP(Optional)
R99 CS
conversatio
nal pri path
load
CSCONVPRITH threshold BSC6900 ADD LOADEQ(Optional)
R99 CS
conversatio
nal
CSCONVSECPAT secondary
R99 CS
H path BSC6900 ADD TRMMAP(Optional)
conversatio
nal pri sec
path load
ratio
UMTS R99
CSCONVSECWHT threshold BSC6900 ADD LOADEQ(Optional)
CS
conversatio
nal service
uplink
CSCONVUL factor BSC6900 ADD TRMFACTOR(Optional)
Voice
Erlang-
CsErlang Erlang BSC6900 SET LICENSE(Optional)
CS domain
CSHOOut2GloadT Reloc GSM SET UINTERRATHONCOV(Optional)
hd load THD BSC6900 ADD UCELLINTERRATHONCOV(Optional)
CS
Information
Update
CsInfoUpdFlag Switch BSC6900 SET UOPERATORCFGPARA(Optional)
CS
Information
Update
Protection
CsInfoUpdTmr Timer BSC6900 SET UOPERATORCFGPARA(Mandatory)
Feature
Supporting
Mode of
CsNriCfgMode CS Domain BSC6900 SET UOPERATORCFGPARA(Optional)
Length of
CS NRI in
CSNRILength bits BSC6900 SET UOPERATORCFGPARA(Mandatory)
Restriction ADD
CsRestriction for CS BSC6900 UCELLDSACMANUALPARA(Mandatory)
Restriction
CsRestriction for CS BSC6900 SET UDSACAUTOALGO(Mandatory)
Inter-RAT
CS
CSServiceHOSwitc handover
UMTS R99
h switch BSC6900 ADD UCELLHOCOMM(Optional)
CS
streaming
service
downlink
CSSTRMDL factor BSC6900 ADD TRMFACTOR(Optional)
R99 CS
streaming
primary
CSSTRMPRIPATH path BSC6900 ADD TRMMAP(Optional)
R99 CS
streaming
pri path
load
CSSTRMPRITH threshold BSC6900 ADD LOADEQ(Optional)
R99 CS
streaming
CSSTRMSECPAT secondary
R99 CS
H path BSC6900 ADD TRMMAP(Optional)
streaming
pri sec
path load
ratio
CSSTRMSECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS R99
CS
streaming
service
uplink
CSSTRMUL factor BSC6900 ADD TRMFACTOR(Optional)
CS
algorithm
CsSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
CS voice
channel
CSVoiceChlType type BSC6900 SET UFRCCHLTYPEPARA(Optional)
CS Voice
Hspa Dl
CSVoiceHspaDlRel Relative
Delay Delay[ms] BSC6900 SET UFRC(Optional)
CS Voice
Hspa Ul
CSVoiceHspaUlRel Relative
Delay Delay[ms] BSC6900 SET UFRC(Optional)
HSUPA
TTI type of
CS voice
H2D
CSVoiceHsupaTti traffic BSC6900 SET UFRC(Optional)
procedure
before
reloc when
Self-
CSVoiceOverHspa CsOverHs
healing
SuppInd pa BSC6900 ADD UNRNC(Optional)
Switch for
Ethernet
Adapter
Traffic
CSW Monitoring BSC6900 SET SLFSLVSW(Optional)
Calculated
transport
format
combinatio ADD UPRACHTFC(Mandatory)
CTFC n BSC6900 ADD USCCPCHTFC(Mandatory)
CTFC
length of
CTFCSize TFCS[bit] BSC6900 ADD UPRACHBASIC(Optional)
CTFC
length of
CTFCSize TFCS[bit] BSC6900 ADD USCCPCHBASIC(Optional)
Critical
CTHD threshold BSC6900 SET FCCPUTHD(Optional)
Critical
CTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Control
plane
CtrlPlnSharingOut sharing out
Offset offset BSC6900 SET UCTRLPLNSHAREPARA(Optional)
Control
plane
CtrlPlnSharingOutT sharing out
hd threshold BSC6900 SET UCTRLPLNSHAREPARA(Optional)
CM Control
Enable
CTRLSW Switch BSC6900 SET CMCTRLSW(Mandatory)
Classified
CZ Zone ID BSC6900 ADD UCZ(Mandatory)
BE D2F/R
Or F/R2P
4B
Threshold[
D2F2PTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
BE D2F/R
4B
Pending
D2FTvmPTAT Time[ms] BSC6900 SET UUESTATETRANS(Optional)
BE D2F/R
D2FTvmTimeToTri 4B
g Time[ms] BSC6900 SET UUESTATETRANS(Optional)
DCCC
DCCC
DcccStg Strategy BSC6900 SET UDCCC(Optional)
Rate Up
Fail
Penalty
Time
DcccUpPenaltyLen Length[s] BSC6900 SET UDCCC(Optional)
DCH Throu
Meas
DchThrouMeasPeri Period[10m
od s] BSC6900 SET UDCCC(Optional)
Period
Amount
DchThrouPendingT after trigger
ime4B 4B on DCH BSC6900 ADD UTYPRABDCCCMC(Optional)
Period
Amount to
DchThrouTimetoTri trigger 4B
gger4B on DCH BSC6900 ADD UTYPRABDCCCMC(Optional)
Default
CnOperato SET
DefaultCnOp r BSC6900 UOPERATORSHARINGMODE(Optional)
Constant
value
configured
DefaultConstantVal by
ue default[dB] BSC6900 SET UFRC(Optional)
Default
PCPICH
DefPcpichEcNo Ec/No BSC6900 ADD UCELLCAC(Optional)
Max diff
DELAY delay[ms] BSC6900 ADD IMAGRP(Optional)
Delay
DelayClass Class BSC6900 ADD UTYPRABRLC(Mandatory)
Delta code
DeltaCodeOccupie occupied
dRate rate[%] BSC6900 SET UDRD(Optional)
Delta Min
DeltaQrxlevmin Rx level BSC6900 ADD UEXT3GCELL(Mandatory)
Delta Min
DeltaQrxlevmin Rx level BSC6900 ADD UCELLSELRESEL(Mandatory)
ADD M3DE(Mandatory)
Destination ADD M3RT(Mandatory)
DENO entity No. BSC6900 ADD M3LKS(Mandatory)
Destination
DESTIP IP address BSC6900 PING IP(Mandatory)
Destination
DESTIP IP address BSC6900 TRC IPADDR(Mandatory)
Destination
DESTIP IP address BSC6900 ADD IPRTBIND(Mandatory)
PING MAC(Mandatory)
DESTMEPID RMEP ID BSC6900 TRC MAC(Mandatory)
Borrowed
device IP ADD PPPLNK(Mandatory)
DEVIP address BSC6900 ADD MPGRP(Mandatory)
Device IP
Address
DEVTYPE Type BSC6900 ADD DEVIP(Mandatory)
The Type
of FTP
Server
Command
DFTPORTSWT Port BSC6900 SET FTPSSRV(Mandatory)
DGPS data
report
DGPSPERIOD period[min] BSC6900 ADD GPS(Optional)
DHCP
Relay
DHCPRLYGATEW Gateway
AYIP IP Address BSC6900 ADD DHCPRLY(Mandatory)
DHCP
DHCPRLYID Relay ID BSC6900 ADD DHCPRLY(Mandatory)
Date in
DINM Month BSC6900 ADD SUBTSK(Mandatory)
Date in
DINW Week BSC6900 ADD SUBTSK(Mandatory)
DLD LICENSE(Mandatory)
DIR Directory BSC6900 ULD LICENSE(Mandatory)
DL CAC
smoothing SET ULDM(Optional)
DL
DlCacAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
common
channel
load
DlCCHLoadRsrvCo reserved
eff coefficient BSC6900 ADD UCELLCAC(Optional)
DL total
power
DlCellTotalThd threshold BSC6900 ADD UCELLCAC(Optional)
Downlink
Compressi
DlCmMethod on Method BSC6900 ADD UNODEBLMTPARA(Optional)
Reserved
DL code
DLCODENO No BSC6900 ADD URESERVEOVSF(Mandatory)
DL
threshold
of Conv
AMR
DlConvAMRThd service BSC6900 ADD UCELLCAC(Optional)
DL
threshold
of Conv
DlConvNonAMRTh non_AMR
d service BSC6900 ADD UCELLCAC(Optional)
DL CS
should be
DlCSInterRatShoul HO user
dBeHOUeNum number BSC6900 ADD UCELLLDR(Optional)
DL CS
should be
DlCSInterRatShoul ho user
dBeHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
DL CS
should not
DlCSInterRatShoul be HO user
dNotHOUeNum number BSC6900 ADD UCELLLDR(Optional)
DL CS
should not
DlCSInterRatShoul be ho user
Downlink
dNotHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
Bit Rate
Threshold
For
DCCC[kbit/
DlDcccRateThd s] BSC6900 SET UDCCC(Optional)
Downlink
Full
Coverage
Bit ADD UCELLDCCC(Optional)
DlFullCvrRate Rate[kbit/s] BSC6900 SET UDCCC(Optional)
Downlink
GBR for
BE
service[kbit
DL
DlGBR /s] BSC6900 SET UUSERGBR(Optional)
handover
credit and
code
DlHoCeCodeResv reserved
Sf SF BSC6900 ADD UCELLCAC(Optional)
DL
handover
access
DlHOThd threshold BSC6900 ADD UCELLCAC(Optional)
Dl HSUPA
DlHSUPARsvdFact reserved
or factor BSC6900 ADD UCELLCAC(Optional)
DL AF of
R99
interactive
DlInteractAF service BSC6900 SET UADMCTRL(Optional)
DL HO
DlInterFreqHoBWT maximum
hd bandwidth BSC6900 ADD UCELLLDR(Optional)
DL HO
DlInterFreqHoCellL load space
oadSpaceThd threshold BSC6900 ADD UCELLLDR(Optional)
DL LDR-
AMR rate
reduction
DlLdrAMRRateRed RAB
uctionRabNum number BSC6900 ADD UCELLLDR(Optional)
DL LDR
smoothing SET ULDM(Optional)
DlLdrAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
DL LDR-
BE rate
reduction
DlLdrBERateReduc RAB
tionRabNum number BSC6900 ADD UCELLLDR(Optional)
DL LDR-
BE rate
reduction
DlLdrBERateReduc RAB
tionRabNum number BSC6900 ADD UNODEBLDR(Optional)
Dl LDR
credit SF
DlLdrCreditSfResT reserved
hd threshold BSC6900 ADD UCELLLDR(Optional)
Dl LDR
Credit SF
DlLdrCreditSfResT reserved
hd threshold BSC6900 ADD UNODEBLDR(Optional)
DL LDR
eighth
DlLdrEighthAction action BSC6900 ADD UCELLLDR(Optional)
DL LDR
DlLdrFifthAction fifth action BSC6900 ADD UCELLLDR(Optional)
DL LDR
DlLdrFifthAction fifth action BSC6900 ADD UNODEBLDR(Optional)
DL LDR
DlLdrFirstAction first action BSC6900 ADD UCELLLDR(Optional)
DL LDR
DlLdrFirstAction first action BSC6900 ADD UNODEBLDR(Optional)
DL LDR
fourth
DlLdrFourthAction action BSC6900 ADD UCELLLDR(Optional)
DL LDR
fourth
DlLdrFourthAction action BSC6900 ADD UNODEBLDR(Optional)
DL LDR
DlLdrNinthActionninth action BSC6900 ADD UCELLLDR(Optional)
DL LDR
un-ctrl RT
Qos re-
DlLdrPsRTQosRen nego RAB
egRabNum num BSC6900 ADD UCELLLDR(Optional)
DL LDR
un-ctrl RT
Qos re-
DlLdrPsRTQosRen nego RAB
egRabNum num BSC6900 ADD UNODEBLDR(Optional)
DL LDR
release
DlLdrRelThd threshold BSC6900 ADD UCELLLDM(Optional)
DL LDR
second
DlLdrSecondAction action BSC6900 ADD UCELLLDR(Optional)
DL LDR
second
DlLdrSecondAction action BSC6900 ADD UNODEBLDR(Optional)
DL LDR
DlLdrSeventhActio seventh
n action BSC6900 ADD UCELLLDR(Optional)
DL LDR
DlLdrSixthAction sixth action BSC6900 ADD UCELLLDR(Optional)
DL LDR
Sixth
DlLdrSixthAction action BSC6900 ADD UNODEBLDR(Optional)
DL LDR
tenth
DlLdrTenthAction action BSC6900 ADD UCELLLDR(Optional)
DL LDR
DlLdrThirdAction third action BSC6900 ADD UCELLLDR(Optional)
DL LDR
DlLdrThirdAction third action BSC6900 ADD UNODEBLDR(Optional)
DL LDR
trigger
DlLdrTrigThd threshold BSC6900 ADD UCELLLDM(Optional)
DL State
Trans
Hysteresis
DlLdTrnsHysTime threshold BSC6900 ADD UCELLLDM(Optional)
Downlink
Maximum
Number of
DlMaxNumOfTfc TFC BSC6900 ADD UNODEBLMTPARA(Optional)
DL MBMS
DlMBMSRsvdFacto reserved
r factor BSC6900 ADD UCELLCAC(Optional)
DL TCP
Measurem
ent Filter ADD UCELLQUALITYMEAS(Optional)
DlMeasFilterCoef Coefficient BSC6900 SET UQUALITYMEAS(Optional)
Downlink
Mid Bit
Rate
Calculate
DlMidRateCalc Method BSC6900 SET UDCCC(Optional)
Downlink
Mid Bit
Rate
Threshold[
DlMidRateThd kbit/s] BSC6900 SET UDCCC(Mandatory)
DL Mode
Change
Waiting
DlModeChangeTim Timer
erLen Length[ms] BSC6900 SET UAMRC(Optional)
DL Mode
Change
Waiting
DlModeChangeTim Timer
erLen Length[ms] BSC6900 SET UAMRCWB(Optional)
DL AF of
R99 non
AMR conv
DlNonAmrConvAF service BSC6900 SET UADMCTRL(Optional)
DL OLC
smoothing SET ULDM(Optional)
DlOlcAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
DL OLC
fast TF
restrict
DlOlcFTFRstrctRab RAB
Num number BSC6900 ADD UCELLOLC(Optional)
DL OLC
fast TF
DlOlcFTFRstrctTim restrict
es times BSC6900 ADD UCELLOLC(Optional)
DL
overload
DlOlcMeasFilterCo measure SET ULDM(Optional)
eff filter coeff BSC6900 SET USATLDM(Optional)
DL OLC
release
DlOlcRelThd threshold BSC6900 ADD UCELLLDM(Optional)
DL OLC
traff
release
DlOlcTraffRelRabN RAB
um number BSC6900 ADD UCELLOLC(Optional)
DL OLC
trigger
hysteresis[ SET ULDM(Optional)
DlOlcTrigHyst 10ms] BSC6900 SET USATLDM(Optional)
DL OLC
trigger
DlOlcTrigThd threshold BSC6900 ADD UCELLLDM(Optional)
DL
threshold
of other
DlOtherThd services BSC6900 ADD UCELLCAC(Optional)
Reserved
DL code
DLOVSFSF OVSF BSC6900 ADD URESERVEOVSF(Mandatory)
DL PS
should be
DlPSInterRatShoul HO user
dBeHOUeNum number BSC6900 ADD UCELLLDR(Optional)
DL PS
should be
DlPSInterRatShoul ho user
dBeHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
DL PS
should not
DlPSInterRatShoul be HO user
dNotHOUeNum number BSC6900 ADD UCELLLDR(Optional)
DL PS
should not
DlPSInterRatShoul be ho user
dNotHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
Switch Of
AMR
Downlink
DlQosAmrAdjSwitc Rate
h Adjustment BSC6900 SET UQOSACT(Optional)
InterFreq
HO Switch
For
DlQosAmrInterFreq Downlink
HoSwitch AMR BSC6900 SET UQOSACT(Optional)
InterRat
HO Switch
For
DlQosAmrInterRat Downlink
HoSwitch AMR BSC6900 SET UQOSACT(Optional)
Down Link
Qos
Measure
timer SET UQOSHO(Optional)
DLQosMcTimerLen length[s] BSC6900 ADD UCELLQOSHO(Optional)
InterFreq
HO Switch
For
DlQosVpInterFreqH Downlink
oSwitch VP BSC6900 SET UQOSACT(Optional)
Switch For
WAMR
DlQosWAmrAdjSwi Downlink
tch Rate BSC6900 SET UQOSACT(Optional)
InterFreq
HO Switch
DlQosWAmrInterFr For WAMR
eqHoSwitch Downlink BSC6900 SET UQOSACT(Optional)
InterRat
HO Switch
DlQosWAmrInterR For WAMR
atHoSwitch Downlink BSC6900 SET UQOSACT(Optional)
Switch Of
DL R99
DlR99CongCtrlSwit Congestion
ch Control BSC6900 SET UDPUCFGDATA(Optional)
Downlink
Rate
Decrease
Adjust
DlRateDnAdjLevel Level BSC6900 SET UDCCC(Optional)
Downlink
Rate
Increase
Adjust
DlRateUpAdjLevel Level BSC6900 SET UDCCC(Optional)
Down Link
RSCP
Used-Freq
THD SET UQOSHO(Optional)
DlRscpQosHyst Hyst[dB] BSC6900 ADD UCELLQOSHO(Optional)
Downlink
spreading
DlSF factor BSC6900 ADD UCELLRLPWR(Mandatory)
Dl SF limit
DlSFLimitCMInd CM ind BSC6900 SET UCMCF(Optional)
DL SF SET UCMCF(Optional)
DlSFTurnPoint threshold BSC6900 ADD UCELLCMCF(Optional)
DL AF of
DlSrbActFactor SRB BSC6900 SET UADMCTRL(Optional)
DL AF of
R99
DL
Streaming
streaming
DlStreamAF service BSC6900 SET UADMCTRL(Optional)
traffic
threshold
on
HSDPA[kbi
DlStrThsOnHsdpa t/s] BSC6900 SET UFRCCHLTYPEPARA(Optional)
DL E1
Event
Relative
Threshold[
DlThdE1 0.1dB] BSC6900 SET UAMRC(Optional)
DL E1
Event
Relative
Threshold[
DlThdE1 0.1dB] BSC6900 SET UAMRCWB(Optional)
DL E2
Event
Relative
Threshold[
DlThdE2 0.1dB] BSC6900 SET UAMRC(Optional)
DL E2
Event
Relative
Threshold[
DlThdE2 0.1dB] BSC6900 SET UAMRCWB(Optional)
DL F1
Event
Relative
Threshold[
DlThdF1 0.1dB] BSC6900 SET UAMRC(Optional)
DL F1
Event
Relative
Threshold[
DlThdF1 0.1dB] BSC6900 SET UAMRCWB(Optional)
DL F2
Event
Relative
Threshold[
DlThdF2 0.1dB] BSC6900 SET UAMRC(Optional)
DL F2
Event
Relative
Threshold[
DlThdF2 0.1dB] BSC6900 SET UAMRCWB(Optional)
DL total
equivalent
user
DlTotalEqUserNum number BSC6900 ADD UCELLCAC(Optional)
VP Trigger
Time Of
Event ADD UCELLQUALITYMEAS(Optional)
DlVpTrigTimeE E[ms] BSC6900 SET UQUALITYMEAS(Optional)
Expected
diff delay
guard-
DLYGB band[cells] BSC6900 ADD IMAGRP(Optional)
Blocked
domain ADD UCNOPALLCELLBLK(Mandatory)
DomainType type BSC6900 ADD URNCALLCELLBLK(Mandatory)
Enable
Door
Status
DOOR_ENGINE_M Alarm
ASK Reporting BSC6900 ADD EMU(Optional)
DSP
code[Whol
DPC e Number] BSC6900 ADD N7DPC(Mandatory)
DPCCH
Transmissi
on Burst
1[subframe
DpcchBurst1 ] BSC6900 SET UDTXDRXPARA(Optional)
DPCCH
Transmissi
on Burst
2[subframe
DpcchBurst2 ] BSC6900 SET UDTXDRXPARA(Optional)
prefered
DPCCH
DpcchSlotFmtForH slot format
spa for HSPA BSC6900 SET UFRC(Optional)
DSP
code[Divid
ed
DPCDNF Number] BSC6900 ADD N7DPC(Mandatory)
DPCH with
MIMO
priority Tx
DpchDivModforMI diversity
MO mode BSC6900 ADD UEXT3GCELL(Optional)
DPCH
diversity
DpchDivModforMI mode for
MO MIMO user BSC6900 ADD UCELLSETUP(Mandatory)
DPCH
priority Tx
DpchPrioTxDiversit diversity
yMode mode BSC6900 ADD UEXT3GCELL(Optional)
DPCH
priority Tx
DpchPrioTxDiversit diversity
yMode mode BSC6900 ADD UCELLSETUP(Mandatory)
DL power
control
DpcMode mode BSC6900 SET UFRC(Optional)
DPUb Slot
DPUSN No. BSC6900 STR IPLOPTST(Mandatory)
ADD N7DPC(Mandatory)
ADD MTP3RT(Mandatory)
ADD MTP3LKS(Mandatory)
DPX DSP index BSC6900 ADD M3DE(Mandatory)
ADD UNRNC(Mandatory)
ADD UCNNODE(Mandatory)
Dpx DSP index BSC6900 ADD UIURGCONN(Mandatory)
Dynamic
resource
allocation
DraSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
Drd Ec/N0
DRDEcN0Threshh threshold[d
old B] BSC6900 ADD UINTERFREQNCELL(Optional)
Drd Ec/N0
DRDEcN0Threshh threshold[d
old B] BSC6900 ADD U2GNCELL(Optional)
DRL AAL2
establishm
ent
indication
DrlAal2EstIndTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
DRL
reconfigura
tion commit
DrlRecfgCmitTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Max inter-
RAT direct
retry
DRMaxGSMNum number BSC6900 ADD UCELLDRD(Optional)
Max inter-
RAT direct
retry
number[tim
DRMaxGSMNum es] BSC6900 SET UDRD(Optional)
Drnc
Parameter
for BE
DrncBeDlRlcQosS Downlink
witch RLC QOS BSC6900 SET UQOSACT(Optional)
Packet
discard
threshold
of queue 0
DROPPKTTHD0 [ms] BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Packet
discard
threshold
of queue 1
DROPPKTTHD1 [ms] BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Packet
discard
threshold
of queue 2
DROPPKTTHD2 [ms] BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Packet
discard
threshold
of queue 3
DROPPKTTHD3 [ms] BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Packet
discard
threshold
of queue 4
DROPPKTTHD4 [ms] BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Packet
discard
threshold
of queue 5
DROPPKTTHD5 [ms] BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Direct retry
DrSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
DRX
Cycle[subfr
DrxCycle ame] BSC6900 SET UDTXDRXPARA(Optional)
DRX cycle
length
DRXCycleLenCoef coefficient BSC6900 ADD UCNDOMAIN(Optional)
Paging
DRX cycle
DrxCycleLenCoef coefficient BSC6900 SET UFRC(Optional)
UE DRX
Grant
Monitoring
DrxGrantMonitoring Decision BSC6900 SET UDTXDRXPARA(Optional)
DRX
Parameter
Drxvalid Switch BSC6900 SET UDTXDRXPARA(Optional)
E1T1 port
DS1 No. BSC6900 ADD PPPLNK(Optional)
E1T1 port
DS1 No. BSC6900 ADD MPLNK(Optional)
Switch for
DsacAutoSwitch auto DSAC BSC6900 SET UDSACAUTOALGO(Optional)
Differentiat
ed Service ADD SCTPLNK(Optional)
DSCP Codepoint BSC6900 SET PHBMAP(Mandatory)
Differentiat
ed services
DSCP code point BSC6900 PING IP(Optional)
Differentiat
ed Service
DSCP Codepoint BSC6900 SET DSCPMAP(Mandatory)
DaylightSa
DST ve BSC6900 SET TZ(Optional)
Destination
DSTIP IP address BSC6900 ADD IPRT(Mandatory)
Destination
address
DSTMASK mask BSC6900 ADD IPRT(Mandatory)
Destination
DSTPORTNO port No. BSC6900 ADD TSCROSS(Mandatory)
Destination
timeslot
DSTTSMASK mask BSC6900 ADD TSCROSS(Mandatory)
DPCCH
Transmissi
on Cycle
1[subframe
DtxCycle1 ] BSC6900 SET UDTXDRXPARA(Optional)
DPCCH
Transmissi
on Cycle
2[subframe
DtxCycle2 ] BSC6900 SET UDTXDRXPARA(Optional)
delay time
of
DtxDrxEnablingDel DTX_DRX
ay in action BSC6900 SET UFRC(Optional)
Long
DPCCH
Preamble[s
DtxLongPreamble lot] BSC6900 SET UDTXDRXPARA(Optional)
DTX
Period
Parameter
Timer
Dtxvalid Switch BSC6900 SET UDTXDRXPARA(Optional)
Length For
Cell
Dynamic
Protect
DynCellOpenJudge ShutDown SET
Timer
Timerlen feature BSC6900 URNCCELLSHUTDOWNPARA(Optional)
Length For
Cell
Dynamic
DynCellShutdownP ShutDown SET
rotectTimerlen feature BSC6900 URNCCELLSHUTDOWNPARA(Optional)
Cell
Dynamic
ShutDown
DynCellShutDownS Switch For SET
witch RNC BSC6900 URNCCELLSHUTDOWNPARA(Optional)
Cell
Dynamic
DynShutdownSwitc ShutDown
h Switch BSC6900 ADD UCELLDYNSHUTDOWN(Mandatory)
Cell
Dynamic
ShutDown
DynShutDownType Type BSC6900 ADD UCELLDYNSHUTDOWN(Optional)
Bearing
E1T1PN port No. BSC6900 ADD FRALNK(Mandatory)
E1/T1 port
E1T1PN No. BSC6900 SET COPTLNK(Optional)
E-DCH
Throu
Meas
E2FThrouMeasPeri Period[10m
od s] BSC6900 SET UUESTATETRANS(Optional)
E-DCH2F
4B
Pending
Period
E2FThrouPTAT Amount BSC6900 SET UUESTATETRANS(Optional)
E-DCH2F
4B
Threshold[
E2FThrouThd kbit/s] BSC6900 SET UUESTATETRANS(Optional)
E-DCH2F
E2FThrouTimeToTr 4B Period
ig Amount BSC6900 SET UUESTATETRANS(Optional)
Code
Number for
EagchCodeNum E-AGCH BSC6900 ADD UCELLHSUPA(Optional)
Check IP
ECHOIP address BSC6900 ADD IPPATH(Mandatory)
Ec/N0
Adjustment
Step[0.001
Ec/N0
EcN0AdjStep dB] BSC6900 SET URACHMEASUREPARA(Optional)
Adjustment
Measurem
ent
Period[10m
EcN0AdjTimerLen s] BSC6900 SET URACHMEASUREPARA(Optional)
Ec/N0
effective
EcN0EffectTime time[ms] BSC6900 SET UFRC(Optional)
Ec/N0
effective
EcN0EffectTime time[ms] BSC6900 ADD UCELLFRC(Optional)
Maximum
Ec/N0
Down
EcN0MaxDownAdj Step[0.001
Step dB] BSC6900 SET URACHMEASUREPARA(Optional)
Maximum
Ec/N0 Up
EcN0MaxUpAdjSte Step[0.001
p dB] BSC6900 SET URACHMEASUREPARA(Optional)
Ec/N0
threshold[d
EcN0Ths B] BSC6900 SET UFRC(Optional)
Ec/N0
threshold[d
EcN0Ths B] BSC6900 ADD UCELLFRC(Optional)
Edch TTI
EdchTtiType type BSC6900 SET UDTXDRXPARA(Mandatory)
UMTS
EFACH
channel
forward
EFACHDL factor BSC6900 ADD TRMFACTOR(Optional)
EFACH
DTCH
EFACHDTCHGBP GBP BSC6900 ADD UCELLEFACH(Optional)
EFachSupI
EFachSupInd nd BSC6900 ADD UEXT3GCELL(Mandatory)
switch for
RRC
established
on
EFachSwitch E_FACH BSC6900 SET URRCESTCAUSE(Optional)
CM
permission
EHSPACMPermissi ind on
onInd HSPA+ BSC6900 SET UCMCF(Optional)
EM EndType BSC6900 SET TZ(Mandatory)
Preemptvul
nerability
for
EmcPreeRefVulnS Emergency
witch call switch BSC6900 SET UQUEUEPREEMPT(Optional)
Emergency
EMERGENCY verification BSC6900 ADD MTP3LKS(Optional)
Emergency
LCS
EmergLCSSwitch Switch BSC6900 SET USMLC(Optional)
Error emit
EMITTHD threshold BSC6900 ADD MPGRP(Optional)
EMS IP
EMSIP Address BSC6900 ADD EMSIP(Mandatory)
Transport
Encrypted
ENCRYMODE Mode BSC6900 SET FTPSSRV(Optional)
The
Encrypted
ENCRYMODE Mode BSC6900 SET FTPSCLT(Optional)
Encryption
EncryptionAlgo algorithm BSC6900 SET UUEA(Optional)
Subtask
ENF Status BSC6900 ADD SUBTSK(Optional)
Local entity
ENTITYT type BSC6900 ADD M3LE(Mandatory)
Destination
ENTITYT entity type BSC6900 ADD M3DE(Mandatory)
Return
ERCODE Code BSC6900 EXP LOG(Optional)
Code
Number for
E-
ErgchEhichCodeNu RGCH/E-
m HICH BSC6900 ADD UCELLHSUPA(Optional)
End Sync
ESSN Serial No. BSC6900 EXP ALMLOG(Optional)
Establishm
ent
indication
ESTINDTMR timer BSC6900 SET AAL2TMR(Optional)
Establishm
ent request
ESTREQTMR timer BSC6900 SET AAL2TMR(Optional)
Execute
ET Type BSC6900 RUN BATCHFILE(Optional)
Traffic
ETT End Time BSC6900 ADD OP(Mandatory)
Measurem
ent Event
4A
threshold[b
Event4aThd yte] BSC6900 ADD UTYPRABDCCCMC(Optional)
Traffic
Measurem
ent Event
4B
threshold[b
Event4bThd yte] BSC6900 ADD UTYPRABDCCCMC(Mandatory)
Event A
report
delay[10ms
EventAReportDelay ] BSC6900 ADD UTYPRABRLC(Optional)
Event A
threshold[0
EventAThred .1%] BSC6900 ADD UTYPRABRLC(Optional)
Event B
threshold[0
EventBThred .1%] BSC6900 ADD UTYPRABRLC(Optional)
End week
EWSEQ sequence BSC6900 SET TZ(Mandatory)
Upper Limit
of Signal
Output of
EX_ANO1_SIG_M External
AX Analog 1 BSC6900 ADD EMU(Optional)
Lower Limit
of Signal
Output of
EX_ANO1_SIG_MI External
N Analog 1 BSC6900 ADD EMU(Optional)
Sensor
Type of
External
Upper Limit
EX_ANO1_TYPE Analog 1 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO1_VAL_M of External
Lower Limit
AX Analog 1 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO1_VAL_MI of External
N Analog 1 BSC6900 ADD EMU(Optional)
Upper Limit
of Signal
Output of
EX_ANO2_SIG_M External
AX Analog 2 BSC6900 ADD EMU(Optional)
Lower Limit
of Signal
Output of
EX_ANO2_SIG_MI External
N Analog 2 BSC6900 ADD EMU(Optional)
Sensor
Type of
External
Upper Limit
EX_ANO2_TYPE Analog 2 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO2_VAL_M of External
Lower Limit
AX Analog 2 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO2_VAL_MI of External
N Analog 2 BSC6900 ADD EMU(Optional)
Upper Limit
of Signal
Output of
EX_ANO3_SIG_M External
AX Analog 3 BSC6900 ADD EMU(Optional)
Lower Limit
of Signal
Output of
EX_ANO3_SIG_MI External
N Analog 3 BSC6900 ADD EMU(Optional)
Sensor
Type of
External
Upper Limit
EX_ANO3_TYPE Analog 3 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO3_VAL_M of External
Lower Limit
AX Analog 3 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO3_VAL_MI of External
N Analog 3 BSC6900 ADD EMU(Optional)
Upper Limit
of Signal
Output of
EX_ANO4_SIG_M External
AX Analog 4 BSC6900 ADD EMU(Optional)
Lower Limit
of Signal
Output of
EX_ANO4_SIG_MI External
N Analog 4 BSC6900 ADD EMU(Optional)
Sensor
Type of
External
EX_ANO4_TYPE Analog 4 BSC6900 ADD EMU(Optional)
Upper Limit
of
Measurem
ent Range
EX_ANO4_VAL_M of External
Lower Limit
AX Analog 4 BSC6900 ADD EMU(Optional)
of
Measurem
ent Range
EX_ANO4_VAL_MI of External
N Analog 4 BSC6900 ADD EMU(Optional)
BE F2P 4B
Pending
F2PTvmPTAT Time[ms] BSC6900 SET UUESTATETRANS(Optional)
F2PTvmTimeToTri BE F2P 4B
g Time[ms] BSC6900 SET UUESTATETRANS(Optional)
FACH ID
FachIdforMcch for MCCH BSC6900 ADD UCELLMCCH(Mandatory)
Fach Max
FachMaxPower Power[dB] BSC6900 ADD UCELLMBMSFACH(Optional)
Fach Max
Power[0.1d
FachMaxPower B] BSC6900 SET UMBMSFACH(Optional)
Fach Max
FachMaxPower Power[dB] BSC6900 SET UMSCHFACH(Optional)
FACH
Meas
FACHMeasInd Indicator BSC6900 ADD UCELLMEAS(Optional)
Fach
power
FACHPwrReduceV reduce
alue value BSC6900 ADD UCELLOLC(Optional)
SPI
FACTOR Factor[%] BSC6900 SET USPIFACTOR(Mandatory)
FACTOR Factor BSC6900 SET CTRLFACTOR(Mandatory)
DCCC
Rate Up
Fail Time
FailTimeTh Threshold BSC6900 SET UDCCC(Optional)
Continuous
FANADJUSTCOM adjustment
MAND0 command BSC6900 SET FANSPEED(Optional)
Discrete
FANADJUSTCOM adjustment
MAND1 command BSC6900 SET FANSPEED(Optional)
Duty ratio
FANADJUSTCOM adjustment
MAND2 command BSC6900 SET FANSPEED(Optional)
Fan
FANADJUSTMOD adjustment
E mode BSC6900 SET FANSPEED(Optional)
Speed
adjustment
FANSPEEDMODE mode BSC6900 SET FANSPEED(Mandatory)
FanBox
FANTYPE Type BSC6900 LOD FAN(Mandatory)
Physical
layer flow
control
FC switch BSC6900 SET ETHPORT(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD FRALNK(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD IMAGRP(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD UNILNK(Optional)
Flow
control
parameter
FCINDEX index BSC6900 SET OPT(Mandatory)
Flow
control
parameter
FCINDEX index BSC6900 SET ETHPORT(Mandatory)
Flow
control
parameter
FCINDEX index BSC6900 ADD PPPLNK(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD MPGRP(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD ATMLOGICPORT(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD IPLOGICPORT(Optional)
Flow
control
parameter
FCINDEX index BSC6900 ADD PORTFLOWCTRLPARA(Mandatory)
Flow
control
parameter
FCINDEX index BSC6900 ADD ETHTRK(Optional)
CRC check
FCSTYPE mode BSC6900 ADD PPPLNK(Optional)
CRC check
FCSTYPE mode BSC6900 ADD MPLNK(Optional)
Flow
control
FCSW switch BSC6900 SET FCSW(Mandatory)
FDD DL
power
control
step
FddTpcDlStepSize size[dB] BSC6900 SET UFRC(Optional)
Fdpch with
MIMO
priority Tx
FdpchDivModforMI diversity
MO mode BSC6900 ADD UEXT3GCELL(Optional)
FDPCH
diversity
FdpchDivModforMI mode for
Fdpch
MO MIMO user BSC6900 ADD UCELLSETUP(Mandatory)
without
MIMO
priority Tx
FdpchDivModforNo diversity
nMIMO mode BSC6900 ADD UEXT3GCELL(Optional)
FDPCH
diversity
mode for
FdpchDivModforNo non MIMO
nMIMO user BSC6900 ADD UCELLSETUP(Mandatory)
FDPCH
maximum
reference
FdpchMaxRefPwr power BSC6900 SET UFDPCHRLPWR(Optional)
FDPCH
minimum
reference
FdpchMinRefPwr power BSC6900 SET UFDPCHRLPWR(Optional)
F-DPCH
Power
Offset[0.25
FdpchPO2 dB] BSC6900 SET UFDPCHPARA(Optional)
Fast
judgement
FDWINDOW window BSC6900 SET FCCPUTHD(Optional)
Target File
FILE Path BSC6900 ZIP FILE(Mandatory)
Log File
FILETYPE Type BSC6900 EXP ALMLOG(Optional)
Intra-freq
meas L3
FilterCoef filter coeff BSC6900 SET UINTRAFREQHO(Optional)
Flc Algo
FlcAlgoSwitch Switch BSC6900 ADD UCELLMCCH(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD FRALNK(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD IMAGRP(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD UNILNK(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 SET OPT(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 SET ETHPORT(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD PPPLNK(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD MPGRP(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD ATMLOGICPORT(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD IPLOGICPORT(Optional)
Flow
FLOWCTRLSWITC control
H switch BSC6900 ADD ETHTRK(Optional)
DLD LICENSE(Mandatory)
FN File Name BSC6900 ULD LICENSE(Mandatory)
EXP CFGMML(Optional)
FN File Name BSC6900 BKP DB(Optional)
Maximum
Delay
FPTIMER Time[ms] BSC6900 ADD IPMUX(Optional)
MP flake
FRAGSIZE size BSC6900 ADD MPGRP(Optional)
Fractional
FRALNKT link type BSC6900 ADD FRALNK(Mandatory)
TX frame
FRMLEN length BSC6900 ADD IMAGRP(Optional)
Factor
FTI table index BSC6900 ADD ADJMAP(Mandatory)
Factor
FTI table index BSC6900 ADD TRMFACTOR(Mandatory)
FUNCTIONSWITC Function
H1 Switch1 BSC6900 SET LICENSE(Optional)
FUNCTIONSWITC Function
H2 Switch2 BSC6900 SET LICENSE(Optional)
FUNCTIONSWITC Function
H3 Switch3 BSC6900 SET LICENSE(Optional)
FUNCTIONSWITC Function
H4 Switch4 BSC6900 SET LICENSE(Optional)
FUNCTIONSWITC Function
H5 Switch5 BSC6900 SET LICENSE(Optional)
Forward
congestion
remain
FWDCONGBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
Forward
congestion
clear
FWDCONGCLRB remain
W bandwidth BSC6900 ADD TRMLOADTH(Optional)
Forward
congestion
clear
remain
FWDCONGCLRTH ratio BSC6900 ADD TRMLOADTH(Optional)
Forward
congestion
remain
Forward
FWDCONGTH ratio BSC6900 ADD TRMLOADTH(Optional)
overload
congestion
clear
FWDOVLDCLRRS remain
Forward
VBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
overload
congestion
clear
remain
FWDOVLDCLRTH ratio BSC6900 ADD TRMLOADTH(Optional)
Forward
overload
congestion
remain
FWDOVLDRSVBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
Forward
overload
congestion
remain
FWDOVLDTH ratio BSC6900 ADD TRMLOADTH(Optional)
Forward
handover
reserved
FWDRESVHOTH ratio BSC6900 ADD TRMLOADTH(Optional)
Forward
handover
reserved
FWDRSVHOBW bandwidth BSC6900 ADD TRMLOADTH(Optional)
Gain
Factor
GainFactorBetaC BetaC BSC6900 ADD UPRACHTFC(Mandatory)
Gain
Factor
GainFactorBetaD BetaD BSC6900 ADD UPRACHTFC(Optional)
Geo-
UMTS
coordinate
general
GCDF data format BSC6900 ADD USMLCCELL(Optional)
common
channel
service
UMTS
downlink
general
GENCCHDL factor BSC6900 ADD TRMFACTOR(Optional)
common
channel
service
uplink
GENCCHUL factor BSC6900 ADD TRMFACTOR(Optional)
Global
route
GLOBALROUTES manageme
Max Mode
W nt switch BSC6900 SET GLOBALROUTESW(Mandatory)
Of
Narrowban
d AMRC
For Golden SET UAMRC(Optional)
Max Mode
GoldMaxMode Users BSC6900 ADD UCELLAMRC(Optional)
Of
Wideband
AMRC For
Golden SET UAMRCWB(Optional)
GoldMaxMode Users BSC6900 ADD UCELLAMRCWB(Optional)
Gold user
load
GoldUserLoadCont control
rolSwitch switch BSC6900 ADD UCELLLDR(Optional)
GPS data
report
GPSPERIOD period BSC6900 ADD GPS(Optional)
Transport
Resource
GRPID Group No. BSC6900 ADD RSCGRP(Mandatory)
Transport
Resource
Group
GRPT Type BSC6900 ADD RSCGRP(Mandatory)
HO UCELL(Optional)
GSM cell ADD UEXT2GCELL(Mandatory)
GSMCellIndex index BSC6900 ADD U2GNCELL(Mandatory)
GSM cell
GSMCellName name BSC6900 ADD UEXT2GCELL(Mandatory)
ICMP type
which will
GUARDTYPE be guarded BSC6900 ADD ICMPGUARD(Mandatory)
Handover
control
HANDOVERCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Handover
control
HANDOVERCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Handover
restore
HANDOVERRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Handover
restore
HANDOVERRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Handover
flow control
HANDOVERSW switch BSC6900 SET FCSW(Optional)
Interval
Block
HangBlockNum5A Number BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Happy bit
HappyBR rate[kbit/s] BSC6900 SET UUSERHAPPYBR(Optional)
HARQ
Preamble
capability
HarqPreaCap indication BSC6900 ADD UEXT3GCELL(Optional)
Happy bit
delay
HBDelaycnd time[ms] BSC6900 ADD UTYPRABHSPA(Optional)
Heartbeat
HBINTER interval BSC6900 ADD SCTPLNK(Optional)
High
bearing
Punish
HCARRYT type BSC6900 ADD VPCLCX(Mandatory)
Timer
Length for
Code
HCodeAdjPunshTi Adjust for
merLength HSDPA BSC6900 ADD UCELLHSDPA(Optional)
HCS
priority ADD UEXT3GCELL(Optional)
HCSPrio level BSC6900 ADD UEXT2GCELL(Optional)
HCS
priority
UMTS
HCSPrio level BSC6900 ADD UCELLHCS(Optional)
HSDPA
backgroun
d service
downlink
HDBKGDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
backgroun
d primary
HDBKGPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSDPA
backgroun
d pri path
load
HDBKGPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
backgroun
d
secondary
HSDPA
HDBKGSECPATH path BSC6900 ADD TRMMAP(Optional)
backgroun
d pri sec
path load
ratio
UMTS
HDBKGSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
conversatio
nal service
downlink
HDCONVDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
conversatio
nal primary
HDCONVPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSDPA
conversatio
nal pri path
load
HDCONVPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
conversatio
nal
HDCONVSECPAT secondary
HSDPA
H path BSC6900 ADD TRMMAP(Optional)
conversatio
nal pri sec
path load
ratio
HSDPA
HDCONVSECWHT threshold BSC6900 ADD LOADEQ(Optional)
high
interactive
pri path
HDHIGHINTERAC load
TPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
high pri sec
path load
HDHIGHINTERAC ratio
UMTS
TSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
interactive
service
downlink
HDINTERDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
high PRI
interactive
HDINTHGHPRIPA primary
TH path BSC6900 ADD TRMMAP(Optional)
HSDPA
high PRI
interactive
HDINTHGHSECPA secondary
TH path BSC6900 ADD TRMMAP(Optional)
HSDPA
low PRI
interactive
HDINTLOWPRIPA primary
TH path BSC6900 ADD TRMMAP(Optional)
HSDPA
low PRI
interactive
HDINTLOWSECPA secondary
TH path BSC6900 ADD TRMMAP(Optional)
HSDPA
middle PRI
interactive
HDINTMIDPRIPAT primary
H path BSC6900 ADD TRMMAP(Optional)
HSDPA
middle PRI
interactive
HDINTMIDSECPA secondary
HSDPA
TH path BSC6900 ADD TRMMAP(Optional)
low
interactive
pri path
HSDPA
HDLOWINTERACT load
low
PRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
HDLOWINTERACT ratio
HSDPA
SECWHT threshold BSC6900 ADD LOADEQ(Optional)
mid
interactive
pri path
HSDPA
HDMIDINTERACT load
mid
PRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
HDMIDINTERACT ratio
SECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS
HSDPA
IMS signal
downlink
HDSIPDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
IMS Signal
primary
HDSIPPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSDPA
IMS Signal
pri path
load
HDSIPPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
IMS Signal
secondary
HSDPA
HDSIPSECPATH path BSC6900 ADD TRMMAP(Optional)
IMS Signal
pri sec
path load
ratio
HDSIPSECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS
HSDPA
signal
downlink
HDSRBDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
Signal
primary
HDSRBPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSDPA
Signal pri
path load
HDSRBPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
Signal
secondary
HDSRBSECPATH path BSC6900 ADD TRMMAP(Optional)
HSDPA
Signal pri
sec path
load ratio
UMTS
HDSRBSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
streaming
service
downlink
HDSTRMDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
streaming
primary
HDSTRMPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSDPA
streaming
pri path
load
HDSTRMPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
streaming
HDSTRMSECPAT secondary
HSDPA
H path BSC6900 ADD TRMMAP(Optional)
streaming
pri sec
path load
ratio
UMTS
HDSTRMSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSDPA
voice
service
downlink
HDVOICEDL factor BSC6900 ADD TRMFACTOR(Optional)
HSDPA
Voice
HDVOICEPRIPAT primary
H path BSC6900 ADD TRMMAP(Optional)
HSDPA
Voice
HDVOICESECPAT secondary
H path BSC6900 ADD TRMMAP(Optional)
High
FRAATM
HFRAATMLNKN link No. BSC6900 ADD VPCLCX(Optional)
Relocation
with HHO
HhoRelocProcSwit process
ch switch BSC6900 ADD UNRNC(Optional)
HHO cross
HHOTRIG IUR trigger BSC6900 ADD UNRNC(Mandatory)
High IMA
HIMAGRPN group No. BSC6900 ADD VPCLCX(Optional)
HO active
set update
response
HoAsuTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
HO cell
update
The priority
HoCellUpdateRspT response
of
mr timer[ms] BSC6900 SET USTATETIMER(Optional)
coverage
based
inter-
frequency
HOCovPrio handover BSC6900 ADD UINTERFREQNCELL(Optional)
HO paging
response
HoPagingRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
HO PhyCh
reconfigura
tion
HoPhychRecfgTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
HO
relocation
request
HoRelocReqTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
NodeB
HostType Host Type BSC6900 ADD UNODEB(Optional)
Inter-freq
HandOver
measure
HoSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
target
frequency
trigger
Ec/No
HOThdEcN0 THD[dB] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Inter-freq
measure
target
frequency
trigger
HO wait
RSCP
timer for
HOThdRscp THD[dBm] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
TrCh or RB
reconfigura
tion
HoWtTrchRecfgRs response[
pTmr ms] BSC6900 SET USTATETIMER(Optional)
High
NCOPT
HPN port No. BSC6900 ADD VPCLCX(Optional)
AF of
hsdpa
HsdpaBackGround backgroun
AF d service BSC6900 SET UADMCTRL(Optional)
HSDPA
best effort
PBR
HsdpaBePBRThd threshold BSC6900 ADD UCELLCAC(Optional)
CM
permission
HsdpaCMPermissi ind on
onInd HSDPA BSC6900 SET UCMCF(Optional)
AF of
hsdpa conv
HsdpaConvAF service BSC6900 SET UADMCTRL(Optional)
AF of
hsdpa
interactive
HsdpaInteractAF service BSC6900 SET UADMCTRL(Optional)
HSDPA
need
HsdpaNeedPwrFilt power filter SET ULDM(Optional)
erLen len BSC6900 SET USATLDM(Optional)
HSDPA bit
HsdpaPrvidBitRate rate filter SET ULDM(Optional)
Minimum
FilterLen len BSC6900 SET USATLDM(Optional)
Number of
HSDPA
RAB
HsdpaRabEstAttMi Establish
nNum Request BSC6900 SET UKPIALMTHD(Optional)
Threshold
of HSDPA
RAB Setup
HsdpaRabEstSucc Successful
RatioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
AF of
hsdpa
streaming
HsdpaStreamAF service BSC6900 SET UADMCTRL(Optional)
Hsdpa
streaming
PBR
HsdpaStrmPBRThd threshold BSC6900 ADD UCELLCAC(Optional)
HSDPA
Cell
Throughput
Dynamic
HSDPAthroughput -1KBPS BSC6900 SET LICENSE(Optional)
ShutDown
Hsdpa
User
HsdpaUserNumTh number
d Threshold BSC6900 ADD UCELLDYNSHUTDOWN(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze1 size1[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze2 size2[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze3 size3[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze4 size4[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze5 size5[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze6 size6[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze7 size7[bit] BSC6900 ADD UTYPRABHSPA(Optional)
HS-DSCH
MAC-D
HsdschMacdPduSi PDU
ze8 size8[bit] BSC6900 ADD UTYPRABHSPA(Optional)
The
Number of
HS-DSCH
HsdschMacdPduSi MAC-D
zeNum PDU Size BSC6900 ADD UTYPRABHSPA(Optional)
High slot
HSN No. BSC6900 ADD VPCLCX(Mandatory)
Cell Hspa
Enhanced
function
HspaEnhSwitch switch BSC6900 ADD UCELLALGOSWITCH(Optional)
prefered
HSPA
PLUS
HSPAPlusSelection character BSC6900 SET UFRC(Optional)
Cell Hspa
Plus
function
HspaPlusSwitch switch BSC6900 ADD UCELLALGOSWITCH(Optional)
The Offset
of HSPA
Total
Power[0.1d
HspaPower B] BSC6900 ADD UCELLHSDPA(Optional)
HSPA
hysteresis
timer
HspaTimerLen length[s] BSC6900 SET UHOCOMM(Optional)
Support
second
HspdcchSecondCo code Flag
deSupp1 for Tb1 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
Support
second
HspdcchSecondCo code Flag
deSupp2 for Tb2 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
Support
second
HspdcchSecondCo code Flag
deSupp3 for Tb3 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
Support
second
HspdcchSecondCo code Flag
deSupp4 for Tb4 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
Code
Number for
HS-
HsPdschCodeNum PDSCH BSC6900 ADD UCELLHSDPA(Optional)
Code Max
Number for
HsPdschMaxCode HS-
Num PDSCH BSC6900 ADD UCELLHSDPA(Optional)
Code Min
Number for
HsPdschMinCodeN HS-
um PDSCH BSC6900 ADD UCELLHSDPA(Optional)
HS-
PDSCH
MPO
HsPdschMPOCons Constant[d
tEnum B] BSC6900 ADD UCELLHSDPA(Optional)
Hspdsch
priority Tx
HspdschPrioTxDive diversity
rsityMode mode BSC6900 ADD UEXT3GCELL(Optional)
Hspdsch
priority Tx
HspdschPrioTxDive diversity
rsityMode mode BSC6900 ADD UCELLSETUP(Mandatory)
High
subrack
HSRN No. BSC6900 ADD VPCLCX(Mandatory)
Code
Number for
HsScchCodeNum HS-SCCH BSC6900 ADD UCELLHSDPA(Optional)
HSUPA
TTI 10ms
schedule
Hsupa10msSchPrd period with
HSUPA
ForGrant grant[ms] BSC6900 SET UFRC(Optional)
TTI 10ms
schedule
period
Hsupa10msSchPrd without
ForNonGrant grant[ms] BSC6900 SET UFRC(Optional)
HSUPA
TTI 2ms
schedule
Hsupa2msSchPrdF period with
HSUPA
orGrant grant[ms] BSC6900 SET UFRC(Optional)
TTI 2ms
schedule
period
Hsupa2msSchPrdF without
orNonGrant grant[ms] BSC6900 SET UFRC(Optional)
AF of
hsupa
HsupaBackGround backgroun
AF d service BSC6900 SET UADMCTRL(Optional)
HSUPA BE
SHO THD
HsupaBeShoRateT RATE[kbit/
hd s] BSC6900 SET UDCCC(Optional)
HSUPA
Credit
HsupaCeConsume Consume
Selection Type BSC6900 ADD UNODEBALGOPARA(Optional)
CM
permission
HsupaCMPermissi ind on
onInd HSUPA BSC6900 SET UCMCF(Optional)
AF of
hsupa conv
HsupaConvAF service BSC6900 SET UADMCTRL(Optional)
HSUPA
DCCC
HsupaDcccStg Strategy BSC6900 SET UDCCC(Optional)
Equal
priority
HSUPA
HsupaEqualPriority user PBR
UserPBRThd threshold BSC6900 ADD UCELLCAC(Optional)
High
priority
HSUPA
HsupaHighPriorityU user PBR
serPBRThd threshold BSC6900 ADD UCELLCAC(Optional)
Initial rate
of HSUPA
BE
traffic[kbit/s
HsupaInitialRate ] BSC6900 SET UFRC(Optional)
AF of
hsupa
interactive
HsupaInteractAF service BSC6900 SET UADMCTRL(Optional)
Low priority
HSUPA
HsupaLowPriorityU user PBR
serPBRThd threshold BSC6900 ADD UCELLCAC(Optional)
HSUPA bit
HsupaPrvidBitRate rate filter
Minimum
FilterLen len BSC6900 SET ULDM(Optional)
Number of
HSUPA
RAB
HsupaRabEstAttMi Establish
nNum Request BSC6900 SET UKPIALMTHD(Optional)
Threshold
of HSUPA
RAB Setup
HsupaRabEstSucc Successful
RatioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
AF of
hsupa
streaming
HsupaStreamAF service BSC6900 SET UADMCTRL(Optional)
HSUPA
Throughput
HSUPA
HSUPAthroughput -1KBPS BSC6900 SET LICENSE(Optional)
auto
retransmit
load
HsupAuRetrnsLdR release
elThd threshold BSC6900 ADD UCELLLDM(Optional)
HSUPA
auto
retransmit
Cell
HsupAuRetrnsLdTri load trigger
Dynamic
gThd threshold BSC6900 ADD UCELLLDM(Optional)
ShutDown
Hsupa
User
HsupaUserNumTh number
d Threshold BSC6900 ADD UCELLDYNSHUTDOWN(Optional)
HSUPA
backgroun
d primary
HUBKGPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
backgroun
d pri path
load
HUBKGPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
backgroun
d
secondary
HSUPA
HUBKGSECPATH path BSC6900 ADD TRMMAP(Optional)
backgroun
d pri sec
path load
ratio
UMTS
HUBKGSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
backgroun
d service
uplink
HUBKGUL factor BSC6900 ADD TRMFACTOR(Optional)
HSUPA
conversatio
nal primary
HUCONVPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
conversatio
nal pri path
load
HUCONVPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
conversatio
nal
HUCONVSECPAT secondary
HSUPA
H path BSC6900 ADD TRMMAP(Optional)
conversatio
nal pri sec
path load
ratio
UMTS
HUCONVSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
conversatio
nal service
uplink
HSUPA
HUCONVUL factor BSC6900 ADD TRMFACTOR(Optional)
high
interactive
pri path
HSUPA
HUHIGHINTERAC load
high
TPRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
HUHIGHINTERAC ratio
UMTS
TSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
interactive
service
uplink
HUINTERUL factor BSC6900 ADD TRMFACTOR(Optional)
HSUPA
high PRI
interactive
HUINTHGHPRIPA primary
TH path BSC6900 ADD TRMMAP(Optional)
HSUPA
high PRI
interactive
HUINTHGHSECPA secondary
TH path BSC6900 ADD TRMMAP(Optional)
HSUPA
low PRI
interactive
HUINTLOWPRIPA primary
TH path BSC6900 ADD TRMMAP(Optional)
HSUPA
low PRI
interactive
HUINTLOWSECPA secondary
TH path BSC6900 ADD TRMMAP(Optional)
HSUPA
middle PRI
interactive
HUINTMIDPRIPAT primary
H path BSC6900 ADD TRMMAP(Optional)
HSUPA
middle PRI
interactive
HUINTMIDSECPA secondary
HSUPA
TH path BSC6900 ADD TRMMAP(Optional)
low
interactive
pri path
HSUPA
HULOWINTERACT load
low
PRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
HULOWINTERACT ratio
SECWHT threshold BSC6900 ADD LOADEQ(Optional)
Enable
Humidity
Alarm
HUM_MASK Reporting BSC6900 ADD EMU(Optional)
Upper Limit
of Humidity
HUM_THD_HIGH Alarm BSC6900 ADD EMU(Optional)
Lower Limit
of Humidity
HSUPA
HUM_THD_LOW Alarm BSC6900 ADD EMU(Optional)
mid
interactive
pri path
HSUPA
HUMIDINTERACT load
mid
PRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
HUMIDINTERACT ratio
SECWHT threshold BSC6900 ADD LOADEQ(Optional)
High UNI
HUNILNKN link No. BSC6900 ADD VPCLCX(Optional)
HSUPA
IMS Signal
primary
HUSIPPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
IMS Signal
pri path
load
HUSIPPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
IMS Signal
secondary
HUSIPSECPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
IMS Signal
pri sec
path load
ratio
HUSIPSECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS
HSUPA
IMS signal
uplink
HUSIPUL factor BSC6900 ADD TRMFACTOR(Optional)
HSUPA
Signal
primary
HUSRBPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
Signal pri
path load
HUSRBPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
Signal
secondary
HUSRBSECPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
Signal pri
sec path
load ratio
HUSRBSECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS
HSUPA
signal
uplink
HUSRBUL factor BSC6900 ADD TRMFACTOR(Optional)
HSUPA
streaming
primary
HUSTRMPRIPATH path BSC6900 ADD TRMMAP(Optional)
HSUPA
streaming
pri path
load
HUSTRMPRITH threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
streaming
HUSTRMSECPAT secondary
HSUPA
H path BSC6900 ADD TRMMAP(Optional)
streaming
pri sec
path load
ratio
UMTS
HUSTRMSECWHT threshold BSC6900 ADD LOADEQ(Optional)
HSUPA
streaming
service
uplink
HUSTRMUL factor BSC6900 ADD TRMFACTOR(Optional)
HSUPA
Voice
HUVOICEPRIPAT primary
H path BSC6900 ADD TRMMAP(Optional)
HSUPA
Voice
HUVOICESECPAT secondary
UMTS
H path BSC6900 ADD TRMMAP(Optional)
HSUPA
voice
service
uplink
HUVOICEUL factor BSC6900 ADD TRMFACTOR(Optional)
1A
hysteresis[ SET UINTRAFREQHO(Optional)
HystFor1A 0.5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1B
hysteresis[ SET UINTRAFREQHO(Optional)
HystFor1B 0.5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1C
hysteresis[ SET UINTRAFREQHO(Optional)
HystFor1C 0.5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1D
hysteresis[ SET UINTRAFREQHO(Optional)
HystFor1D 0.5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1F
hysteresis[ SET UINTRAFREQHO(Optional)
HystFor1F 0.5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1J
hysteresis[ SET UINTRAFREQHO(Optional)
HystFor1J 0.5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
2B
hysteresis[ SET UINTERFREQHOCOV(Optional)
HystFor2B 0.5dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
SET UINTERFREQHONCOV(Optional)
2C ADD
hysteresis[ UCELLINTERFREQHONCOV(Optional)
Hystfor2C 0.5dB] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
2D
hysteresis[ SET UINTERFREQHOCOV(Optional)
HystFor2D 0.5dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
2D
hysteresis[ SET UINTERRATHOCOV(Optional)
Hystfor2D 0.5dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
2F
hysteresis[ SET UINTERFREQHOCOV(Optional)
HystFor2F 0.5dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
2F
hysteresis[ SET UINTERRATHOCOV(Optional)
Hystfor2F 0.5dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3A
hysteresis[ SET UINTERRATHOCOV(Optional)
Hystfor3A 0.5dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3C SET UINTERRATHONCOV(Optional)
hysteresis[ ADD UCELLINTERRATHONCOV(Optional)
Hystfor3C 0.5dB] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-RAT
hysteresis[ SET UINTERRATHOCOV(Optional)
HystforInterRAT 0.5dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inactive RX
IARXTMR timer BSC6900 SET SCCPTMR(Optional)
Inactive TX
IATXTMR timer BSC6900 SET SCCPTMR(Optional)
ICMP
packet
ICMPPKGLEN Length BSC6900 ADD IPPATH(Optional)
ADD SCHTSK(Mandatory)
SET SCHTSKSW(Optional)
ADD SUBTSK(Optional)
ID Task ID BSC6900 ADD SUBCMD(Optional)
Cell barred
indicator
IdleCellBarred for SIB3 BSC6900 ADD UCELLACCESSSTRICT(Mandatory)
Intra-freq
cell
reselection
IdleIntraFreqResele ind for
ction SIB3 BSC6900 ADD UCELLACCESSSTRICT(Optional)
Hysteresis
1 for idle
IdleQhyst1s mode[2dB] BSC6900 ADD UCELLSELRESEL(Optional)
Hysteresis
2 for idle
IdleQhyst2s mode[2dB] BSC6900 ADD UCELLSELRESEL(Optional)
Time
barred for
IdleTbarred SIB3 BSC6900 ADD UCELLACCESSSTRICT(Optional)
IMA group
IMAGRPN No. BSC6900 ADD FRALNK(Mandatory)
ADD IMAGRP(Mandatory)
IMA group ADD IMALNK(Mandatory)
IMAGRPN No. BSC6900 BLK IMAGRP(Mandatory)
STR IMATST(Mandatory)
IMA link ADD IMALNK(Mandatory)
IMALNKN No. BSC6900 BLK IMALNK(Mandatory)
IMA
protocol
IMAVER version BSC6900 ADD IMAGRP(Optional)
Ims Bear
ImsBearEnhanced enhanced
Switch switch BSC6900 SET UFRC(Optional)
IMS
channel
ImsChlType type BSC6900 SET UFRCCHLTYPEPARA(Optional)
IMS MAC-c
IMSGBR flow GBR BSC6900 ADD UCELLEFACH(Optional)
The end of
ImsiMax IMSI BSC6900 ADD UIMSISNAMAP(Mandatory)
The start of
ImsiMin IMSI BSC6900 ADD UIMSISNAMAP(Mandatory)
ImsInitialAccessRat Ims initial
e rate[kbit/s] BSC6900 SET UFRC(Mandatory)
Maximum
of IMSI
route
parameter
ImsiRtMax in IDNNS BSC6900 ADD UIMSIIDNNSCNIDMAP(Mandatory)
Minimum
of IMSI
route
parameter
ImsiRtMin in IDNNS BSC6900 ADD UIMSIIDNNSCNIDMAP(Mandatory)
Threshold
IMS MAC-c
For
IMSMBR flow MBR BSC6900 ADD UCELLEFACH(Optional)
DPCCH
Transmissi
on Cycle
2[EDCH
InactThsForCycle2 TTI] BSC6900 SET UDTXDRXPARA(Optional)
DRX
Inactivity
InactThsForDrxCyc Threshold[
Inactivity
le subframe] BSC6900 SET UDTXDRXPARA(Optional)
Threshold
for UE
Grant
InactThsForGrantM Monitoring[
onitoring EDCH TTI] BSC6900 SET UDTXDRXPARA(Optional)
Infrared
INFRA_RED_MAS alarm
K switch BSC6900 ADD EMU(Optional)
Timer_NO-
INHTMR CREDIT BSC6900 ADD SAALLNK(Optional)
Integrity
protection
IntegrityProtectAlgo algorithm BSC6900 SET UUIA(Optional)
Interactive
MAC-c flow
INTERACTGBR GBR BSC6900 ADD UCELLEFACH(Optional)
Interactive
MAC-c flow
INTERACTMBR MBR BSC6900 ADD UCELLEFACH(Optional)
Inter-freq
InterFreqActiveTyp MBDR
measure
e switch BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
target
frequency
trigger
InterFreqCovHOTh Ec/No ADD
dEcN0 THD[dB] BSC6900 UCELLINTERFREQHONCOV(Optional)
Inter-freq
CS
measure
InterFreqCSThd2D start Ec/No SET UINTERFREQHOCOV(Optional)
EcN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
CS
measure
InterFreqCSThd2D start RSCP SET UINTERFREQHOCOV(Optional)
RSCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
CS
measure
InterFreqCSThd2F stop Ec/No SET UINTERFREQHOCOV(Optional)
EcN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
CS
measure
InterFreqCSThd2F stop RSCP SET UINTERFREQHOCOV(Optional)
RSCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
InterFreqDlMbdrTri DL
SET UINTERFREQHOCOV(Optional)
gThreshold theshold BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
SET UINTERFREQHONCOV(Optional)
Inter- ADD UCELLINTERFREQHOCOV(Optional)
frequency ADD
measure UCELLINTERFREQHONCOV(Optional)
InterFreqFilterCoef filter coeff BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Inter-freq
handover
InterFreqHOSwitch type switch BSC6900 ADD UCELLHOCOMM(Optional)
Inter-freq H
measure
InterFreqHThd2DE start Ec/No SET UINTERFREQHOCOV(Optional)
cN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq H
measure
InterFreqHThd2DR start RSCP SET UINTERFREQHOCOV(Optional)
SCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq H
measure
InterFreqHThd2FE stop Ec/No SET UINTERFREQHOCOV(Optional)
cN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq H
measure
InterFreqHThd2FR stop RSCP SET UINTERFREQHOCOV(Optional)
SCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
and Inter-
RAT Meas
InterFreqInterRatM Ctrl Info
easInd Ind BSC6900 ADD UCELLMEAS(Optional)
Inter-freq
InterFreqMeasQua Measure
ntity Quantity BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
SET UINTERFREQHOCOV(Optional)
Inter-freq SET UINTERFREQHONCOV(Optional)
measure ADD UCELLINTERFREQHOCOV(Optional)
timer ADD
InterFreqMeasTime length[s] BSC6900 UCELLINTERFREQHONCOV(Optional)
Inter-freq
measure
timer
Inter-
InterFreqMeasTime length[s] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Frequency
Neighborin
g Cell
Inter-freq
InterFreqNCellDete Detect
measure
ctSwitch Switch BSC6900 SET UNCELLDETECTSWITCH(Optional)
target
frequency
trigger
InterFreqNCovHOT Ec/No
hdEcN0 THD[dB] BSC6900 SET UINTERFREQHONCOV(Optional)
Inter-freq
R99 PS
measure
InterFreqR99PsThd start Ec/No SET UINTERFREQHOCOV(Optional)
2DEcN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
R99 PS
measure
InterFreqR99PsThd start RSCP SET UINTERFREQHOCOV(Optional)
2DRSCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
R99 PS
measure
InterFreqR99PsThd stop Ec/No SET UINTERFREQHOCOV(Optional)
2FEcN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
R99 PS
measure
InterFreqR99PsThd stop RSCP SET UINTERFREQHOCOV(Optional)
2FRSCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-freq
and Inter-
RAT
InterFreqRATSwitc coexist
h switch BSC6900 ADD UCELLHOCOMM(Optional)
Inter-
frequency
measure
InterFreqReportMo report SET UINTERFREQHOCOV(Optional)
de mode BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-
frequency
measure
InterFreqReportMo report
Inter-
de mode BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
freqency
scaling
factor for
InterFreqTreselScal reselection
ingFactor delay BSC6900 ADD UCELLSELRESEL(Optional)
InterFreqUlMbdrTri UL
gThreshold theshold BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Inter RAT
InterPlmnHoAllowe Inter Plmn SET
dInterRat Ho Allowed BSC6900 UOPERATORSHARINGMODE(Optional)
Intra RAT
InterPlmnHoAllowe Inter Plmn SET
dIntraRat Ho Allowed BSC6900 UOPERATORSHARINGMODE(Optional)
MBDR
InterRatActiveType switch BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-RAT
CS
measure
InterRATCSThd2D start Ec/No SET UINTERRATHOCOV(Optional)
EcN0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
CS
measure
InterRATCSThd2D start RSCP SET UINTERRATHOCOV(Optional)
RSCP THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
CS
measure
InterRATCSThd2F stop Ec/No SET UINTERRATHOCOV(Optional)
EcN0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
CS
measure
InterRATCSThd2F stop RSCP SET UINTERRATHOCOV(Optional)
RSCP THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
InterRatDlMbdrTrig DL
Threshold theshold BSC6900 ADD UCELLMBDRINTERRAT(Optional)
SET UINTERRATHOCOV(Optional)
SET UINTERRATHONCOV(Optional)
ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT ADD UCELLINTERRATHONCOV(Optional)
InterRATFilterCoef filter coeff BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-RAT
handover
max
InterRATHOAttemp attempt SET UINTERRATHONCOV(Optional)
ts times BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Emergency
LCS Inter-
Rat
Handover
InterRatHOPermit Permit BSC6900 SET USMLC(Optional)
Inter-RAT
CS
handover
decision
InterRATHOThd THD[dBm] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-Rat
Handover
InterRatHOType Type BSC6900 SET USMLC(Optional)
Inter-RAT
H measure
InterRATHThd2DE start Ec/No SET UINTERRATHOCOV(Optional)
cN0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
H measure
InterRATHThd2DR start RSCP SET UINTERRATHOCOV(Optional)
SCP THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
H measure
InterRATHThd2FEc stop Ec/No SET UINTERRATHOCOV(Optional)
N0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
H measure
InterRATHThd2FR stop RSCP SET UINTERRATHOCOV(Optional)
SCP THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT SET UINTERRATHOCOV(Optional)
measure SET UINTERRATHONCOV(Optional)
timer ADD UCELLINTERRATHOCOV(Optional)
InterRATMeasTime length[s] BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Inter-RAT
measure
timer
InterRATMeasTime length[s] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-Rat
Neighborin
g Cell
InterRatNCellDetec Detect
tSwitch Switch BSC6900 SET UNCELLDETECTSWITCH(Optional)
Inter-RAT
CS
handover
InterRATNCovHOC decision SET UINTERRATHONCOV(Optional)
SThd THD[dBm] BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Inter-RAT
PS
handover
InterRATNCovHOP decision SET UINTERRATHONCOV(Optional)
SThd THD[dBm] BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Inter-RAT
period SET UINTERRATHOCOV(Optional)
InterRATPeriodRep report ADD UCELLINTERRATHOCOV(Optional)
ortInterval interval[ms] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-RAT
HO SET UINTERRATHOCOV(Optional)
physical SET UINTERRATHONCOV(Optional)
InterRatPhyChFail channel ADD UCELLINTERRATHOCOV(Optional)
Num failure THD BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Inter-RAT
PingPong
InterRATPingPong Hyst[0.5dB SET UINTERRATHOCOV(Optional)
Hyst ] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
InterRATPingPong PingPong SET UINTERRATHOCOV(Optional)
Timer timer[s] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
R99 PS
measure
InterRATR99PsThd start Ec/No SET UINTERRATHOCOV(Optional)
2DEcN0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
R99 PS
measure
InterRATR99PsThd start RSCP SET UINTERRATHOCOV(Optional)
2DRSCP THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
R99 PS
measure
InterRATR99PsThd stop Ec/No SET UINTERRATHOCOV(Optional)
2FEcN0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
R99 PS
measure
InterRATR99PsThd stop RSCP SET UINTERRATHOCOV(Optional)
2FRSCP THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
InterRatReportMod report SET UINTERRATHOCOV(Optional)
e mode BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
InterRatReportMod report
e mode BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Inter-RAT
scaling
factor for
InterRatTreselScali reselection
ngFactor delay BSC6900 ADD UCELLSELRESEL(Optional)
InterRatUlMbdrTrig UL
Threshold theshold BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Relative
INTERVAL Time BSC6900 EXP LOG(Optional)
Send PKT
INTERVAL Interval[s] BSC6900 STR ETHOAMLOOPTST(Optional)
1F event
absolute
EcNo
IntraAblThdFor1FE threshold[d SET UINTRAFREQHO(Optional)
cNo B] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1F event
absolute
RSCP
IntraAblThdFor1FR threshold[d SET UINTRAFREQHO(Optional)
SCP Bm] BSC6900 ADD UCELLINTRAFREQHO(Optional)
Intra-freq
meas L3
IntraFreqFilterCoef filter coeff BSC6900 ADD UCELLINTRAFREQHO(Optional)
Intra-
frequency
LDB period
IntraFreqLdbPeriod timer SET ULDCPERIOD(Optional)
TimerLen length BSC6900 SET USATLDCPERIOD(Optional)
Intra-freq
Meas Ctrl
IntraFreqMeasInd Info Ind BSC6900 ADD UCELLMEAS(Optional)
Intra-freq
IntraFreqMeasQua Measure SET UINTRAFREQHO(Optional)
Intra-
ntity Quantity BSC6900 ADD UCELLINTRAFREQHO(Optional)
Frequency
Neighborin
g Cell
IntraFreqNCellDete Detect
ctSwitch Switch BSC6900 SET UNCELLDETECTSWITCH(Optional)
Intra-
MBSC
IntraMbscInd Indication. BSC6900 ADD UIURGCONN(Mandatory)
1A Event
Relative
Threshold[
CS non VP
IntraRelThdFor1A dB] BSC6900 SET USMLC(Mandatory)
service 1A
event
relative
IntraRelThdFor1AC THD[0.5dB SET UINTRAFREQHO(Optional)
SNVP ] BSC6900 ADD UCELLINTRAFREQHO(Optional)
VP service
1A event
relative
IntraRelThdFor1AC THD[0.5dB SET UINTRAFREQHO(Optional)
SVP ] BSC6900 ADD UCELLINTRAFREQHO(Optional)
PS service
1A event
relative
IntraRelThdFor1AP threshold[0 SET UINTRAFREQHO(Optional)
S .5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1B Event
Relative
Threshold[
CS non VP
IntraRelThdFor1B dB] BSC6900 SET USMLC(Mandatory)
service 1B
event
relative
IntraRelThdFor1BC THD[0.5dB SET UINTRAFREQHO(Optional)
SNVP ] BSC6900 ADD UCELLINTRAFREQHO(Optional)
VP service
1B event
relative
IntraRelThdFor1BC THD[0.5dB SET UINTRAFREQHO(Optional)
SVP ] BSC6900 ADD UCELLINTRAFREQHO(Optional)
PS service
1B event
relative
IntraRelThdFor1BP threshold[0 SET UINTRAFREQHO(Optional)
S .5dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
Time
INTV Interval BSC6900 ADD SUBTSK(Optional)
OMU
Automatic
Switchover
INTV Interval BSC6900 SET ASWPARA(Mandatory)
EXP LOG(Optional)
ADD SNTPSRVINFO(Mandatory)
DLD LICENSE(Mandatory)
IP IP Address BSC6900 ULD LICENSE(Mandatory)
Local IP
IPADDR address BSC6900 ADD IPPATH(Mandatory)
Local IP
IPADDR address BSC6900 ADD ETHIP(Mandatory)
Packet
source IP
IPADDR address BSC6900 ADD ICMPGUARD(Mandatory)
Next Hop
IPADDR IP address. BSC6900 ADD VLANID(Mandatory)
Local IP
IPADDR address BSC6900 ADD ETHTRKIP(Mandatory)
Head
IPHC compress BSC6900 ADD PPPLNK(Optional)
Head
IPHC compress BSC6900 ADD MPGRP(Optional)
IP address
IPINDEX index BSC6900 ADD ETHIP(Mandatory)
IP address
IPINDEX index BSC6900 ADD ETHTRKIP(Mandatory)
Whether
Binding
logical port
IPLOGPORTFLAG or not BSC6900 ADD UNODEBIP(Mandatory)
Logic port
IPLPN No. BSC6900 ADD UNODEBIP(Mandatory)
IP MUX
IPMUXINDEX Index BSC6900 ADD IPMUX(Optional)
NodeB
IP_TRANS
IPSN Slot No. BSC6900 ADD UNODEBIP(Mandatory)
NodeB
IP_TRANS
Subrack
IPSRN No. BSC6900 ADD UNODEBIP(Mandatory)
IPTRANSAPARTIN IP Trans
D Apart Ind BSC6900 ADD UNODEB(Mandatory)
Access
class 0
IsAccessClass0Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 10
IsAccessClass10B barred
arred indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 11
IsAccessClass11B barred
arred indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 12
IsAccessClass12B barred
arred indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 13
IsAccessClass13B barred
arred indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 14
IsAccessClass14B barred
arred indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 15
IsAccessClass15B barred
arred indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 1
IsAccessClass1Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 2
IsAccessClass2Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 3
IsAccessClass3Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 4
IsAccessClass4Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 5
IsAccessClass5Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 6
IsAccessClass6Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 7
IsAccessClass7Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 8
IsAccessClass8Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Access
class 9
IsAccessClass9Bar barred
red indicator BSC6900 ADD UCELLACCESSSTRICT(Optional)
Is First
Class
Transport
Resource
ISFIRSTCLASS Group BSC6900 ADD RSCGRP(Mandatory)
Is MAC-hs
window
IsFixedMachsWinSi size fixed
ze or not BSC6900 ADD UNODEBLMTPARA(Optional)
Primary
Operator
ISPRIMARYPLMN Flag BSC6900 SET LICENSE(Optional)
IS
ISQOSPATH QOSPATH BSC6900 ADD IPMUX(Mandatory)
Is Root
IsROOTNODE Node BSC6900 ADD ADJNODE(Mandatory)
Support
ISSUPPORTFRA FRA BSC6900 ADD BRD(Optional)
ADD IPPATH(Mandatory)
Interface ADD ADJMAP(Mandatory)
ITFT Type BSC6900 ADD TRMMAP(Mandatory)
AC
Restriction
Interval of
IuAcIntervalOfCell Cell By IU BSC6900 SET UACALGO(Optional)
DL OLC
released
IubDlOlcRelRabNu RAB
m number BSC6900 ADD UNODEBOLC(Optional)
UL OLC
released
IubUlOlcRelRabNu RAB
m number BSC6900 ADD UNODEBOLC(Optional)
Iu CS
Release
IuCSRelNoRABTm protection
r timer[s] BSC6900 SET USTATETIMER(Optional)
IU max call
barring
IUCTHD ratio BSC6900 SET FCSW(Optional)
IU flow
control
IUFCSW switch BSC6900 SET FCSW(Optional)
Iu PS
Release
protection
IuPSRelNoRABTmr timer[s] BSC6900 SET USTATETIMER(Optional)
Congestion
Control
Indicator
IurCongCtrlSuppIn over IUR
d for NRNC BSC6900 ADD UNRNC(Optional)
Iur
downlink
transfer
control
IURDLCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Iur
downlink
transfer
control
IURDLCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Iur
downlink
transfer
restore
IURDLRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Iur
downlink
transfer
restore
IURDLRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Iur
downlink
transfer
flow control
IURDLSW switch BSC6900 SET FCSW(Optional)
IUR
Interface
Existing
IurExistInd Indication BSC6900 ADD UNRNC(Mandatory)
Iur-g
control
IURGCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Iur-g
control
IURGCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Iur-g
restore
IURGRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Iur-g
restore
IURGRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Iur-g flow
control
IURGSW switch BSC6900 SET FCSW(Optional)
Hsdpa cap
ind over
IUR for
IurHsdpaSuppInd NRNC BSC6900 ADD UNRNC(Optional)
Hsupa cap
ind over
IUR for
IurHsupaSuppInd NRNC BSC6900 ADD UNRNC(Optional)
Iur uplink
transfer
control
IURULCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Iur uplink
transfer
control
IURULCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Iur uplink
transfer
restore
IURULRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Iur uplink
transfer
restore
IURULRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Iur uplink
transfer
flow control
IURULSW switch BSC6900 SET FCSW(Optional)
Iu State
IuStatePolicyForPo Policy For
ol RncPool BSC6900 ADD URNCPOOL(Optional)
J0 Byte
J0BYTE_FORMAT Format BSC6900 SET OPT(Mandatory)
J0
Expected
J0RXBYTE_FORM Incept
AT Format BSC6900 SET OPT(Mandatory)
J0
expected
J0RXT incept type BSC6900 SET OPT(Optional)
J0
expected
incept
J0RXVALUE value BSC6900 SET OPT(Optional)
J0
J0TXBYTE_FORM Transmit
AT Format BSC6900 SET OPT(Mandatory)
J0 transmit
J0TXT type BSC6900 SET OPT(Optional)
J0 transmit
J0TXVALUE value BSC6900 SET OPT(Optional)
J1 Byte
J1BYTE_FORMAT Format BSC6900 SET OPT(Mandatory)
J1
Expected
J1RXBYTE_FORM Incept
AT Format BSC6900 SET OPT(Mandatory)
J1
expected
J1RXT incept type BSC6900 SET OPT(Optional)
J1
expected
incept
J1RXVALUE value BSC6900 SET OPT(Optional)
J1
J1TXBYTE_FORM Transmit
AT Format BSC6900 SET OPT(Mandatory)
J1 transmit
J1TXT type BSC6900 SET OPT(Optional)
J1 transmit
J1TXVALUE value BSC6900 SET OPT(Optional)
J1TYPE J1 type BSC6900 SET OPT(Optional)
J2
mismatch
alarm
J2ALMSWITCH switch BSC6900 SET COPTLNK(Optional)
J2 Byte
J2BYTE_FORMAT Format BSC6900 SET COPTLNK(Optional)
J2 transmit
J2TXVALUE value BSC6900 SET COPTLNK(Optional)
Automatic
Append J SET OPT(Optional)
JAUTOADD Byte BSC6900 SET COPTLNK(Optional)
Keep-alive
timer ADD PPPLNK(Optional)
KEEPALIVE length[S] BSC6900 ADD MPLNK(Optional)
Timer_Kee
KEEPTMR p-Alive BSC6900 ADD SAALLNK(Optional)
the Period
of KPI
Alarm
KpiAlarmChkTimes Check BSC6900 SET UKPIALMTHD(Optional)
RNC
Report KPI
Alarm
KpiAlarmSwitch Switch BSC6900 SET UKPIALMTHD(Optional)
ADD ULASNAMAP(Mandatory)
ADD UCZ(Mandatory)
ADD UEXT3GCELL(Mandatory)
ADD UEXT2GCELL(Mandatory)
ADD UCELLSETUP(Mandatory)
ADD ULAC(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
Location ADD URAC(Mandatory)
LAC area code BSC6900 ADD USAC(Mandatory)
Aggregatio
LACPMODE n Mode BSC6900 ADD ETHTRK(Mandatory)
GPS
antenna
LATITUDE latitude BSC6900 ADD GPS(Mandatory)
GPS
antenna
LATITUDESEC latitude BSC6900 ADD GPS(Mandatory)
Delay
measure
period
LATPRD [100ms] BSC6900 ADD IPLOGICPORT(Optional)
Delay
adjust
suspend
period
LATSUSTM [LATTH] BSC6900 ADD IPLOGICPORT(Optional)
Rate down
threshold
for delay
LATTH [ms] BSC6900 ADD IPLOGICPORT(Optional)
average
delay down
filter
LATUDK mantissa BSC6900 ADD IPLOGICPORT(Optional)
average
delay up
filter
LATUPK mantissa BSC6900 ADD IPLOGICPORT(Optional)
Low
bearing
LCARRYT type BSC6900 ADD VPCLCX(Mandatory)
LDB
smoothing SET ULDM(Optional)
LdbAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
Load
balance
DRD
LdbDRDchoice choice BSC6900 ADD UCELLDRD(Optional)
Load
balance
Dl load
DRD
balance
LdbDRDchoice choice BSC6900 SET UDRD(Optional)
DRD
power
remain
Dl load
LdbDRDLoadRema threshold
balance
inThdDCH for DCH[%] BSC6900 ADD UCELLDRD(Optional)
DRD
power
Dl load
remain
balance
LdbDRDLoadRema threshold
DRD
inThdDCH for DCH[%] BSC6900 SET UDRD(Optional)
power
remain
Dl load
threshold
balance
LdbDRDLoadRema for
DRD
inThdHSDPA HSDPA[%] BSC6900 ADD UCELLDRD(Optional)
power
remain
threshold
LdbDRDLoadRema for
inThdHSDPA HSDPA[%] BSC6900 SET UDRD(Optional)
Load
balance
DRD offset
LdbDRDOffsetDCH for DCH[%] BSC6900 SET UDRD(Optional)
Load
balance
DRD offset
LdbDRDOffsetHSD for
PA HSDPA[%] BSC6900 SET UDRD(Optional)
Load
balance
DRD
LdbDRDSwitchDC switch for
H DCH BSC6900 ADD UCELLDRD(Optional)
Load
balance
DRD
LdbDRDSwitchDC switch for
H DCH BSC6900 SET UDRD(Optional)
Load
balance
DRD
LdbDRDSwitchHS switch for
DPA HSDPA BSC6900 ADD UCELLDRD(Optional)
Load
balance
DRD
Load
LdbDRDSwitchHS switch for
balance
DPA HSDPA BSC6900 SET UDRD(Optional)
DRD total
power
protect
LdbDRDTotalPwrPr threshold[
oThd %] BSC6900 SET UDRD(Optional)
load
control
algorithm
LdcSwitch switch BSC6900 SET ULDCALGOPARA(Optional)
the switch
of periodic
load
LdPrdRprtSwitch reporting BSC6900 ADD UEXT2GCELL(Mandatory)
LDR code
priority
LdrCodePriUseInd indicator BSC6900 ADD UCELLLDR(Optional)
InterFreq
HO code
used ratio
LdrCodeUsedSpac space
eThd threshold BSC6900 ADD UCELLLDR(Optional)
first priority
for load
LdrFirstPri reshuffling BSC6900 SET ULDCALGOPARA(Optional)
fourth
priority for
load
LdrFourthPri reshuffling BSC6900 SET ULDCALGOPARA(Optional)
LDR period
timer SET ULDCPERIOD(Optional)
LdrPeriodTimerLen length BSC6900 SET USATLDCPERIOD(Optional)
second
priority for
load
LdrSecondPri reshuffling BSC6900 SET ULDCALGOPARA(Optional)
third
priority for
load
LdrThirdPri reshuffling BSC6900 SET ULDCALGOPARA(Optional)
Path Load
EQ
Threshold
Table
LEI Index BSC6900 ADD LOADEQ(Mandatory)
Bronze
user Load
LEIBRZ EQ index BSC6900 ADD ADJMAP(Mandatory)
Gold user
Load EQ
LEIGLD index BSC6900 ADD ADJMAP(Mandatory)
Silver user
Load EQ
LEISLV index BSC6900 ADD ADJMAP(Mandatory)
Alarm
Mask
LEVEL Switch BSC6900 SET ALMML(Mandatory)
Low
FRAATM
LFRAATMLNKN link No. BSC6900 ADD VPCLCX(Optional)
Logical
function
LGCAPPTYPE type BSC6900 ADD BRD(Optional)
Logic
function
LGCAPPTYPE type BSC6900 ADD PPPLNK(Optional)
Logic
function
LGCAPPTYPE type BSC6900 ADD MPGRP(Optional)
Alarm
occur
LICALMCTHD threshold BSC6900 SET LICALMTHD(Mandatory)
Alarm
recover
LICALMRTHD threshold BSC6900 SET LICALMTHD(Mandatory)
Low IMA
LIMAGRPN group No. BSC6900 ADD VPCLCX(Optional)
Dl SF
threshold
LimitCMDlSFThd to limit CM BSC6900 SET UCMCF(Mandatory)
Low
Activity Bit
Rate
Threshold[
LittleRateThd kbit/s] BSC6900 SET UDCCC(Optional)
Channel
LLCN No. BSC6900 SET E1T1LOP(Optional)
Tributary
LNKNUMMODE Numbering BSC6900 SET OPT(Optional)
Initial
bearing
traffic
LNKREDFLAG active tag BSC6900 ADD M3LNK(Optional)
Signalling
LNKSLSMASK link mask BSC6900 ADD MTP3LKS(Optional)
Signalling
LNKSLSMASK link mask BSC6900 ADD M3LKS(Optional)
Local IP
LOCALIP address BSC6900 ADD PPPLNK(Mandatory)
Local IP
LOCALIP address BSC6900 ADD MPGRP(Mandatory)
Local IP
LOCALIP address BSC6900 STR IPLOPTST(Mandatory)
ADD UCELLSETUP(Mandatory)
Local cell ADD ULOCELL(Mandatory)
LoCell ID BSC6900 ADD UCELLQUICKSETUP(Mandatory)
Filter of
Location EXP ALMLOG(Optional)
LOCINFOKEY Information BSC6900 STA ALMLOG(Optional)
First local
LOCIP1 IP address BSC6900 ADD SCTPLNK(Mandatory)
Second
local IP
LOCIP2 address BSC6900 ADD SCTPLNK(Optional)
Set
Locked/Unl
LOCKST ock BSC6900 SET OPLOCK(Mandatory)
Local
SCTP port
LOCPN No. BSC6900 ADD SCTPLNK(Mandatory)
Board Start
Load
LODCTRL Control. BSC6900 SET LODCTRL(Mandatory)
Log control
LOGCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Log control
LOGCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Logic Port
LOGPORTFLAG Flag BSC6900 ADD SCTPLNK(Mandatory)
Logic Port
LOGPORTNO No. BSC6900 ADD SCTPLNK(Mandatory)
Logic Port
LOGPORTSN Slot No. BSC6900 ADD SCTPLNK(Mandatory)
Log restore
LOGRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Log restore
LOGRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Log control
LOGSW switch BSC6900 SET FCSW(Optional)
Log File
LOGTYPE Type BSC6900 COL LOG(Mandatory)
GPS
antenna
LONGITUDE longitude BSC6900 ADD GPS(Mandatory)
GPS
antenna
LONGITUDESEC longitude BSC6900 ADD GPS(Mandatory)
Loop
Detect
LOOPSW Switch BSC6900 SET E1T1(Optional)
IP Logic
LPN Port No. BSC6900 ADD IPPATH(Mandatory)
Low
NCOPT
LPN port No. BSC6900 ADD VPCLCX(Optional)
The logic
port
LPN number BSC6900 ADD ATMLOGICPORT(Optional)
Logic port
LPN No. BSC6900 ADD IPLOGICPORT(Optional)
The ATM
logical port
LPN Number BSC6900 STR UNODEBBWRPT(Mandatory)
IP Logic
Port Slot
LPNSN No. BSC6900 ADD IPPATH(Mandatory)
Low slot
LSN No. BSC6900 ADD VPCLCX(Mandatory)
Low
bearing
subrack
LSRN No. BSC6900 ADD VPCLCX(Mandatory)
Whether
Include List
LSTCMD Command BSC6900 EXP LOG(Optional)
Result list
LstFormat format BSC6900 CMP TBLDATA(Optional)
Low UNI
LUNILNKN link No. BSC6900 ADD VPCLCX(Optional)
ADD DEVIP(Mandatory)
Subnet ADD ETHIP(Mandatory)
MASK mask BSC6900 ADD EMSIP(Mandatory)
Subnet
MASK mask BSC6900 ADD PPPLNK(Mandatory)
Subnet
MASK mask BSC6900 ADD MPGRP(Mandatory)
Packet
source
MASK mask BSC6900 ADD ICMPGUARD(Mandatory)
Association
max
MAXASSOCRETR retrans BSC6900 ADD SCTPLNK(Optional)
Inter-Freq
DRD max
attempt
MaxAttNum times BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Inter-RAT
DRD max
attempt
MaxAttNum times BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Max
MaxBitRate rate[bit/s] BSC6900 ADD UTYPRABBASIC(Mandatory)
Max bit
rate of
MaxBitRate service BSC6900 ADD UCELLRLPWR(Mandatory)
Max
bandwidth
MAXBW [64kbps] BSC6900 ADD IPLOGICPORT(Optional)
Max
capability
normal
MaxCAPSLowLoad load BSC6900 SET UCTRLPLNSHAREPARA(Optional)
Max
capability
MaxCAPSMidLoad middle load BSC6900 SET UCTRLPLNSHAREPARA(Optional)
Maximum
Retry
MaxMissTimes Times BSC6900 SET PWDPOLICY(Optional)
Maximum
codes of
uplink
MaxNrOfUlDpchs DPDCH BSC6900 ADD UNODEBLMTPARA(Optional)
Max Alarm
Log
MAXNUM Number BSC6900 SET ALMCAPACITY(Optional)
Path max
MAXPATHRETR retrans BSC6900 ADD SCTPLNK(Optional)
Max
transmit
power of
PCPICH[0.
MaxPCPICHPower 1dBm] BSC6900 ADD UPCPICH(Optional)
Max Poll
MAXPD Data Count BSC6900 ADD SAALLNK(Optional)
Max
queuing
MaxQueueTimeLen time length BSC6900 SET UQUEUEPREEMPT(Optional)
PPP mux
max sub-
frame
MAXSFLEN length BSC6900 ADD PPPLNK(Optional)
PPP mux
max sub-
frame
MAXSFLEN length BSC6900 ADD MPGRP(Optional)
Maximum
Target
MaxTargetUlLoadF Uplink load
actor Factor BSC6900 ADD UCELLHSUPA(Optional)
Maximum
time for
MAXTIME posave BSC6900 STR POSAVE(Optional)
MBFD
Check
MBFDCHKN Index BSC6900 ADD IPRTBIND(Mandatory)
Multi hop
BFD detect
MBFDLOCALIP local ip BSC6900 STR IPCHK(Mandatory)
AF of
UMTS
MBMS
MBMS
MbmsAF service BSC6900 SET UADMCTRL(Optional)
common
channel
service
downlink
MBMSCCHDL factor BSC6900 ADD TRMFACTOR(Optional)
Mbms
Channel
MbmsChInd Indicator BSC6900 ADD USCCPCHBASIC(Optional)
MBMS
descend
MbmsDecPowerRa power rab
bThd threshold BSC6900 ADD UCELLLDR(Optional)
Set mbms
data check
MbmsInactTmr timer BSC6900 SET UMBMSALARMPARA(Mandatory)
MBMS Iub
MbmsIubSharingS Sharing
witch switch BSC6900 SET UMBMSSWITCH(Optional)
Mobile
country
MbmsMCC code BSC6900 ADD UMBMSALARMSERVICE(Mandatory)
Mobile
network
MbmsMNC code BSC6900 ADD UMBMSALARMSERVICE(Mandatory)
MBMS
neighborin
g cell
MbmsNCellInd indicator BSC6900 ADD UINTRAFREQNCELL(Optional)
MBMS
services
number
MbmsOlcRelNum released BSC6900 ADD UCELLOLC(Optional)
Mbms
MbmsPreemptAlgo PreemptAl
Switch goSwitch BSC6900 SET UQUEUEPREEMPT(Optional)
Mbms Ptp
UpLink Bit
MbmsPtpUlBitRate Rate[kbit/s] BSC6900 SET URNCMBMSPARA(Optional)
ADD UCELLMBMSSA(Mandatory)
MBMS SA ADD UMBMSSA(Mandatory)
MbmsSaId ID BSC6900 ADD USAMBMSPARA(Mandatory)
MBMS
MbmsServiceId ServiceId BSC6900 ADD UMBMSALARMSERVICE(Mandatory)
MBMS
Control
MbmsSwitch Switch BSC6900 SET UMBMSSWITCH(Mandatory)
MBMS
Throughput
MBMSthroughput -1KBPS BSC6900 SET LICENSE(Optional)
Max burst
MBS size BSC6900 ADD ATMTRF(Optional)
Adjustment
Coefficient
Mbsc2GLoadAdjust of 2G Load
Coeff Value BSC6900 SET UMBSCCRRM(Optional)
Load
Difference
Threshold
Between
3G And 2G
PS Load
Mbsc3G2GLdBlcCs Of CS
Difference
DeltaThrd Service BSC6900 SET UMBSCCRRM(Optional)
Threshold
Between
3G And 2G
Mbsc3G2GLdBlcPs Of Ps
Non-
DeltaThrd Service BSC6900 SET UMBSCCRRM(Optional)
coverage
handover
based on
MbscNcovHoOn2G 2G load
ldInd Indication BSC6900 SET UMBSCCRRM(Optional)
GERAN
System
Information
MbscReqGeranInfo Exchange
Switch Switch BSC6900 SET UMBSCCRRM(Optional)
Service
Distribution
and Load
MbscServiceDiffLd Balancing
bSwitch Switch BSC6900 SET UMBSCCRRM(Optional)
Mobile
country
MCC code BSC6900 ADD UEXT2GCELL(Mandatory)
Mobile
country
MCC code BSC6900 SET UMBMSPERF(Mandatory)
Mcch
Access
McchAccessPeriod Period
Coef coefficient BSC6900 SET UMCCHPERIODCOEF(Optional)
Mcch Mod
McchModPeriodCo Period
ef coefficient BSC6900 SET UMCCHPERIODCOEF(Optional)
Mcch
Repetition
McchRepPeriodCo Period
ef coefficient BSC6900 SET UMCCHPERIODCOEF(Optional)
MC PRI
MCCLASS number BSC6900 ADD MPGRP(Optional)
Minimum
MCR cell rate BSC6900 ADD ATMTRF(Optional)
ADD ETHMD(Mandatory)
MDIDX MD INDEX BSC6900 ADD ETHMA(Mandatory)
3A
Measure SET UINTERRATHOCOV(Optional)
MeasQuantityOf3A Quantity BSC6900 ADD UCELLINTERRATHOCOV(Optional)
MP/MC list
head
MHF option BSC6900 ADD MPGRP(Optional)
MICH
MichPower Power[dB] BSC6900 ADD UCELLMCCH(Optional)
MICH
STTD
MichSttdInd Indicator BSC6900 ADD UCELLMCCH(Optional)
Min
bandwidth
MINBW [64kbps] BSC6900 ADD IPLOGICPORT(Optional)
Min
Common
channel
MinCmchPi priority BSC6900 ADD UFACH(Optional)
Minimum
SF of
downlink
MinDlChCodeLen DPCH BSC6900 ADD UNODEBLMTPARA(Optional)
Minimum
Ec/N0
Value[0.5d
MinEcN0Value B] BSC6900 SET URACHMEASUREPARA(Optional)
AMR Event
E
Reporting ADD UCELLQUALITYMEAS(Mandatory)
MinForAmrE Period BSC6900 SET UQUALITYMEAS(Mandatory)
BE Event E
Reporting ADD UCELLQUALITYMEAS(Mandatory)
MinForBeE Period BSC6900 SET UQUALITYMEAS(Mandatory)
BE Event F
Reporting ADD UCELLQUALITYMEAS(Mandatory)
MinForBeF Period BSC6900 SET UQUALITYMEAS(Mandatory)
DL basic
MinForDlBasicMea meas rprt SET ULDM(Mandatory)
s cycle[m] BSC6900 SET USATLDM(Mandatory)
DL OLC
meas rprt SET ULDM(Mandatory)
MinForDlOlcMeas cycle[m] BSC6900 SET USATLDM(Mandatory)
HSDPA bit
MinForHsdpaPrvid rate meas SET ULDM(Mandatory)
RateMeas cycle[m] BSC6900 SET USATLDM(Mandatory)
HSDPA
need pwr
MinForHsdpaPwrM meas SET ULDM(Mandatory)
eas cycle[m] BSC6900 SET USATLDM(Mandatory)
HSUPA bit
MinForHsupaPrvid rate meas
RateMeas cycle[m] BSC6900 SET ULDM(Mandatory)
UL basic
MinForUlBasicMea meas rprt SET ULDM(Mandatory)
s cycle[m] BSC6900 SET USATLDM(Mandatory)
UL OLC
meas rprt SET ULDM(Mandatory)
MinForUlOlcMeas cycle[m] BSC6900 SET USATLDM(Mandatory)
VP Event E
Reporting ADD UCELLQUALITYMEAS(Mandatory)
MinForVpE Period BSC6900 SET UQUALITYMEAS(Mandatory)
Min
Number of
Links
MINLNKNUM Activated BSC6900 ADD IMAGRP(Optional)
Min
transmit
power of
PCPICH[0.
MinPCPICHPower 1dBm] BSC6900 ADD UPCPICH(Optional)
Min interval
of BFD
packet
receive
MINRXINT [ms] BSC6900 STR IPCHK(Optional)
Min interval
of BFD
packet
MINTXINT send [ms] BSC6900 STR IPCHK(Optional)
Minimum
SF of
uplink
MinUlChCodeLen DPDCH BSC6900 ADD UNODEBLMTPARA(Optional)
Mirror Dest
MIRRORDPN Port No. BSC6900 STR ETHMIRRORPORT(Mandatory)
Mirror
Source
MIRRORSPN Port No. BSC6900 STR ETHMIRRORPORT(Mandatory)
Max
preamble
Mmax loop BSC6900 ADD URACH(Optional)
Mobile
network
MNC code BSC6900 ADD UEXT2GCELL(Mandatory)
Mobile
network
MNC code BSC6900 SET UMBMSPERF(Mandatory)
Mocn
Control SET
MocnControlSwitch Switch BSC6900 UOPERATORSHARINGMODE(Optional)
MOCN SET
MOCNSupport Support BSC6900 UOPERATORSHARINGMODE(Optional)
System
clock
working
MODE mode BSC6900 SET CLKMODE(Mandatory)
Signalling
MODE link mode BSC6900 ADD SCTPLNK(Mandatory)
Configure
MODE Mode BSC6900 SET QUICKCFG(Mandatory)
Backup
MODE mode BSC6900 SET MSP(Optional)
Check
MODE mode BSC6900 STR IPCHK(Optional)
AAL2
modifying
indication
MODINDTMR timer BSC6900 SET AAL2TMR(Optional)
AAL2
modifying
request
MODREQTMR timer BSC6900 SET AAL2TMR(Optional)
re-TX
monitor
MoniterPrd period[ms] BSC6900 ADD UTYPRABRLC(Optional)
DCCC
Rate Up
Fail
Monitor
Time
MoniTimeLen length[s] BSC6900 SET UDCCC(Optional)
MP Group
MPGRPN No. BSC6900 ADD IPLOGICPORT(Optional)
Manageme
nt proving
MPS status BSC6900 ADD SAALLNK(Optional)
MPU
Subrack SET MPUBIND(Mandatory)
MPUSUBRACK No. BSC6900 ADD BRD(Optional)
Msch
Switch For
MschSwitchForMtc MtchMulti
hMulti Sccpch BSC6900 SET UMBMSSWITCH(Optional)
Msch
Switch For
MschSwitchForNon NonMtchM
MtchMulti ulti Sccpch BSC6900 SET UMBMSSWITCH(Optional)
Msg
MsgContent Content BSC6900 ADD UCELLCBSSAC(Mandatory)
Message
MsgInd Indicator BSC6900 ADD UCELLCBSSAC(Optional)
MSP
Control
MSPCMD Command BSC6900 SET MSPCMD(Mandatory)
Self-
healing
Switch for
Memory
MSW Overload BSC6900 SET SLFSLVSW(Optional)
MTCH
maximal
MtchMaxPwr power BSC6900 ADD UCELLCAC(Optional)
MTCH
maximal
Mtch
MtchMaxSf SF BSC6900 ADD UCELLCAC(Optional)
Minimal
Power
Percent for
priority ADD UCELLMBMSFACH(Optional)
Mtch
MtchMinPerc0 0[%] BSC6900 SET UMBMSFACH(Optional)
Minimal
Power
Percent for
priority ADD UCELLMBMSFACH(Optional)
MtchMinPerc15 15[%] BSC6900 SET UMBMSFACH(Optional)
MTCH
Multiplex
Threshold[
MtchMultiplexThd kbit/s] BSC6900 SET URNCMBMSPARA(Optional)
Mtch Rohc
MtchRohcSwitch Switch BSC6900 SET UMTCH(Optional)
MTCH
reserve
MtchRsvPwr power BSC6900 ADD UCELLCAC(Optional)
MTCH
MtchRsvSf reserve SF BSC6900 ADD UCELLCAC(Optional)
IP MUX
MUXTYPE Type BSC6900 ADD IPMUX(Mandatory)
My
MYDISCRIMINATO discriminat
R or of BFD BSC6900 STR IPCHK(Optional)
Constant
N300 300 BSC6900 SET UIDLEMODETIMER(Optional)
Constant
N302 302 BSC6900 SET UCONNMODETIMER(Optional)
Constant
N304 304 BSC6900 SET UCONNMODETIMER(Optional)
Constant
N308 308 BSC6900 SET UCONNMODETIMER(Optional)
Constant
N315 315 BSC6900 SET UCONNMODETIMER(Optional)
Constant
N381 381 BSC6900 SET UCONNMODETIMER(Optional)
Signalling
Route
NAME name BSC6900 ADD MTP3RT(Mandatory)
Signalling
link set
NAME name BSC6900 ADD MTP3LKS(Mandatory)
Signalling
NAME link name BSC6900 ADD MTP3LNK(Mandatory)
Adjacent
Node
NAME Name BSC6900 ADD ADJNODE(Mandatory)
Local entity
NAME name BSC6900 ADD M3LE(Mandatory)
Destination
entity
NAME name BSC6900 ADD M3DE(Mandatory)
M3UA
NAME route name BSC6900 ADD M3RT(Mandatory)
M3UA
Signalling
link set
NAME name BSC6900 ADD M3LKS(Mandatory)
M3UA
Signaling
NAME link name BSC6900 ADD M3LNK(Mandatory)
Random
back-off
NB01max upper limit BSC6900 ADD URACH(Optional)
Random
back-off
NB01min lower limit BSC6900 ADD URACH(Optional)
AMR_RRC
Number
per Second
NBAmrRrcNum for NodeB BSC6900 SET UCALLSHOCKCTRL(Optional)
NBAP
service
listening
NBAPSRVPN port No. BSC6900 SET SCTPSRVPORT(Optional)
NodeB
ATM_TRA
NS IP
NBATMOAMIP address BSC6900 ADD UNODEBIP(Mandatory)
NodeB
ATM_TRA
NS IP
NBATMOAMMASK Mask BSC6900 ADD UNODEBIP(Mandatory)
HiPri_RRC
Number
per Second
NBHighPriRrcNum for NodeB BSC6900 SET UCALLSHOCKCTRL(Optional)
NodeB
IP_TRANS
NBIPOAMIP IP address BSC6900 ADD UNODEBIP(Mandatory)
NodeB
IP_TRANS
NBIPOAMMASK IP Mask BSC6900 ADD UNODEBIP(Mandatory)
The First
Serial
NBLB1 Number BSC6900 ADD UNODEBESN(Mandatory)
The
Second
Serial
NBLB2 Number BSC6900 ADD UNODEBESN(Mandatory)
Cell CAC
NBMCacAlgoSwitc algorithm
h switch BSC6900 ADD UCELLALGOSWITCH(Optional)
Downlink
CAC
NBMDlCacAlgoSel algorithm
Switch switch BSC6900 ADD UCELLALGOSWITCH(Mandatory)
Cell LDC
algorithm
NBMLdcAlgoSwitch switch BSC6900 ADD UCELLALGOSWITCH(Optional)
BHO
Select
User
NbmLdcBHOUeSel algorithm
Switch switch BSC6900 ADD UCELLALGOSWITCH(Optional)
Mac-hs
Reset
NBMMachsResetAl algorithm
goSelSwitch switch BSC6900 ADD UCELLALGOSWITCH(Optional)
Uplink
CAC
NBMUlCacAlgoSel algorithm
Switch switch BSC6900 ADD UCELLALGOSWITCH(Mandatory)
Set WPS
NbmWpsAlgorithm user
Priority priority BSC6900 SET UWPSALGO(Optional)
Set WPS
NbmWpsAlgorithm Algorithm
Switch Switch BSC6900 SET UWPSALGO(Optional)
Neighborin
g BSC ADD UNBSC(Mandatory)
NBscIndex Index BSC6900 ADD UIURGCONN(Mandatory)
Neighborin
g BSC
NBscIndex Index BSC6900 ADD UEXT2GCELL(Mandatory)
NodeB Call
Shock
NBTotalRrcNumTh Trigger
d Threshold BSC6900 SET UCALLSHOCKCTRL(Optional)
NodeB
NBTRANTP TransType BSC6900 ADD UNODEBIP(Mandatory)
Network
NCC color code BSC6900 ADD UEXT2GCELL(Mandatory)
Cell
Neighborin ADD UINTRAFREQNCELL(Mandatory)
Dynamic
NCellId g cell ID BSC6900 ADD UINTERFREQNCELL(Mandatory)
ShutDown
Neighbour
Cell Load
NCellLdrRemainTh Remain
d threshold BSC6900 ADD UCELLDYNSHUTDOWN(Optional)
RNC ID of
a
neighborin ADD UINTRAFREQNCELL(Mandatory)
NCellRncId g cell BSC6900 ADD UINTERFREQNCELL(Mandatory)
Network
Control
NcMode Mode BSC6900 ADD UEXT2GCELL(Optional)
ADD UCELLMBMSPARA(Optional)
Counting ADD USAMBMSPARA(Optional)
NCountingThd Threshold BSC6900 SET URNCMBMSPARA(Optional)
NCOV
Reloc Ind
based on
GSM cell
NcovHoOn2GldInd load BSC6900 SET UINTERRATHONCOV(Optional)
Non-HCS
Ncrnonhcs NCR BSC6900 ADD UCELLSELRESEL(Optional)
Adjacent
NEIGHBOR flag BSC6900 ADD N7DPC(Optional)
Forward
Route
NEXTHOP Address BSC6900 ADD OMUIPRT(Mandatory)
Forward
route
NEXTHOP address BSC6900 ADD IPRT(Mandatory)
Forward
route
NEXTHOP address BSC6900 ADD IPRTBIND(Mandatory)
Threshold
for UE fast
speed SET UHCSHO(Optional)
NFastSpdEst decision BSC6900 ADD UCELLHCSHO(Optional)
Num of
continuous
NInsyncInd in sync ind BSC6900 ADD UCELLSETUP(Optional)
Network
mode of
NMO operation BSC6900 ADD UCNDOMAIN(Optional)
Timer
NNSfTmr NNSF BSC6900 SET UOPERATORCFGPARA(Optional)
Lower limit
of No.1
NO1M48ALMTHD input
DOWN -48V[-V] BSC6900 SET PWRPARA(Optional)
Upper limit
of No.1
NO1M48ALMTHD input
UP -48V[-V] BSC6900 SET PWRPARA(Optional)
Lower limit
of No.2
NO2M48ALMTHD input
DOWN -48V[-V] BSC6900 SET PWRPARA(Optional)
Upper limit
of No.2
NO2M48ALMTHD input
UP -48V[-V] BSC6900 SET PWRPARA(Optional)
Lower limit
of No.3
NO3M48ALMTHD input
DOWN -48V[-V] BSC6900 SET PWRPARA(Optional)
Upper limit
of No.3
NO3M48ALMTHD input
UP -48V[-V] BSC6900 SET PWRPARA(Optional)
Lower limit
of No.4
NO4M48ALMTHD input
DOWN -48V[-V] BSC6900 SET PWRPARA(Optional)
Upper limit
of No.4
NO4M48ALMTHD input
UP -48V[-V] BSC6900 SET PWRPARA(Optional)
Lower limit
of No.5
NO5M48ALMTHD input
DOWN -48V[-V] BSC6900 SET PWRPARA(Optional)
Upper limit
of No.5
NO5M48ALMTHD input
UP -48V[-V] BSC6900 SET PWRPARA(Optional)
Lower limit
of No.6
NO6M48ALMTHD input
DOWN -48V[-V] BSC6900 SET PWRPARA(Optional)
Upper limit
of No.6
NO6M48ALMTHD input
UP -48V[-V] BSC6900 SET PWRPARA(Optional)
NodeB
NODEBCABN Cab No. BSC6900 STR UNODEBBWRPT(Mandatory)
NodeB
Max
HSDPA
NodeBHsdpaMaxU User
serNum Number BSC6900 ADD UNODEBALGOPARA(Optional)
NodeB
Max
HSUPA
NodeBHsupaMaxU User
serNum Number BSC6900 ADD UNODEBALGOPARA(Optional)
ADD UNODEBESN(Mandatory)
NODEBID NodeB ID BSC6900 ADD UNODEBIP(Mandatory)
NodeB
NODEBNAME name BSC6900 STR UNODEBBWRPT(Mandatory)
NodeB
Protocol
NodeBProtclVer version BSC6900 ADD UNODEB(Optional)
NODEB
NODEBPT Port Type BSC6900 ADD UNODEBESN(Mandatory)
NODEBRPTPERIO Report
D period[min] BSC6900 STR UNODEBBWRPT(Optional)
Report
NODEBRPTTYPE type BSC6900 STR UNODEBBWRPT(Optional)
NodeB Slot
NODEBSN No. BSC6900 STR UNODEBBWRPT(Mandatory)
NodeB
Subrack
NODEBSRN No. BSC6900 STR UNODEBBWRPT(Mandatory)
NodeB
NODEBSUBBRDT Subboard
YPE type BSC6900 STR UNODEBBWRPT(Mandatory)
NodeB
NodeBType Type BSC6900 ADD UNODEB(Optional)
Measurem
ent ADD
NodeSyncPeriod period[5m] BSC6900 UNBNODESYNCMONPARA(Mandatory)
Measurem
ent start ADD
NodeSyncTime time BSC6900 UNBNODESYNCMONPARA(Mandatory)
Adjacent
NODET Node Type BSC6900 ADD ADJNODE(Mandatory)
Small-
scaled
base
NodeType station type BSC6900 ADD UNODEBLMTPARA(Mandatory)
Target
Non-
Non-HCS
serving E-
NonhcsInd indicator BSC6900 ADD UCELLSELRESEL(Optional)
DCH to
Total E-
DCH
NonServToTotalEd Power
chPwrRatio ratio[%] BSC6900 ADD UCELLHSUPA(Optional)
Num of
continuous
out of sync
NOutsyncInd ind BSC6900 ADD UCELLSETUP(Optional)
The priority
of neighbor
NPrio cell BSC6900 ADD UINTRAFREQNCELL(Mandatory)
The priority
of neighbor
NPrio cell BSC6900 ADD UINTERFREQNCELL(Mandatory)
The priority
of neighbor
NPrio cell BSC6900 ADD U2GNCELL(Mandatory)
ADD UINTRAFREQNCELL(Optional)
The flag of ADD UINTERFREQNCELL(Optional)
NPrioFlag the priority BSC6900 ADD U2GNCELL(Optional)
ADD UCELLMBMSPARA(Optional)
Ptp To Ptm ADD USAMBMSPARA(Optional)
NPtpToPtmOffset Offset BSC6900 SET URNCMBMSPARA(Optional)
Number of
TRACERT
Packages
NQUERIES Per TTL BSC6900 TRC IPADDR(Optional)
Network
resource
NRI identity BSC6900 ADD UNRIGLBCNIDMAP(Mandatory)
Neighborin
NRncId g RNC ID BSC6900 ADD UEXT3GCELL(Mandatory)
Destination
ATM
NSAP address BSC6900 ADD AAL2RT(Mandatory)
Source
ATM
NSAP address BSC6900 ADD URNCBASIC(Mandatory)
ATM
Nsap address BSC6900 ADD UNODEB(Mandatory)
Threshold
for UE slow
speed SET UHCSHO(Optional)
NSlowSpdEst decision BSC6900 ADD UCELLHCSHO(Optional)
NullNRI
NullNRI VALUE BSC6900 SET UOPERATORCFGPARA(Optional)
Number of
restrained
AC every ADD
NumberOfACs time BSC6900 UCELLDSACMANUALPARA(Mandatory)
Number of
restrained
Access
Class
NumberOfACs every time BSC6900 SET UDSACAUTOALGO(Mandatory)
OAM flow
min
bandwidth[
OAMFLOWBW %] BSC6900 SET ETHPORT(Optional)
OAM flow
min
bandwidth[
OAMFLOWBW %] BSC6900 ADD PPPLNK(Optional)
OAM flow
min
bandwidth[
OAMFLOWBW %] BSC6900 ADD MPGRP(Optional)
OAM flow
min
bandwidth[
OAMFLOWBW %] BSC6900 ADD IPLOGICPORT(Optional)
OAM flow
min
bandwidth[
OAMFLOWBW %] BSC6900 ADD ETHTRK(Optional)
DSCP of
OAMFLOWDSCP OAM flow BSC6900 SET QUEUEMAP(Mandatory)
OAM flow
min
bandwidth
OAMMINBWKEY switch BSC6900 SET QUEUEMAP(Optional)
Object
OBJTP Type BSC6900 ADD OBJALMSHLD(Mandatory)
Qoffset1
OffQoffset1Heavy offset 2[dB] BSC6900 ADD UCELLPUC(Optional)
Qoffset1
OffQoffset1Light offset 1[dB] BSC6900 ADD UCELLPUC(Optional)
Qoffset2
OffQoffset2Heavy offset 2[dB] BSC6900 ADD UCELLPUC(Optional)
Qoffset2
OffQoffset2Light offset 1[dB] BSC6900 ADD UCELLPUC(Optional)
Sintersearc
h offset
OffSinterHeavy 2[2dB] BSC6900 ADD UCELLPUC(Optional)
Sintersearc
h offset
OffSinterLight 1[2dB] BSC6900 ADD UCELLPUC(Optional)
OLC period
timer SET ULDCPERIOD(Optional)
OlcPeriodTimerLen length[ms] BSC6900 SET USATLDCPERIOD(Optional)
OMU
External
Network
OMUIP Virtual IP BSC6900 ADD EMSIP(Optional)
OMU
External
Network
OMUMASK Mask BSC6900 ADD EMSIP(Optional)
EXP LOG(Optional)
ADD OP(Mandatory)
OP Operator BSC6900 ULK USR(Mandatory)
Operator
OperatorType Type BSC6900 ADD UCNOPERATOR(Mandatory)
Opposite
direction
transport
channel
OppositeTrchType type BSC6900 ADD UTYPRABRLC(Mandatory)
Optional IE
OptionalIESendSwi Send
tch Switch BSC6900 SET USMLC(Optional)
Optical
interface
OPTM standard BSC6900 SET OPT(Optional)
Cell Center
Orientation
Of Major
Axis[degre
OrientOfMajorAxis e] BSC6900 ADD USMLCCELL(Mandatory)
Operation CON PATCH(Optional)
OT type BSC6900 LOD PATCH(Optional)
OTDOA
Method
OtdoaActivateFlag Active Flag BSC6900 ADD USMLCCELL(Optional)
OTDOA
OTDOAMethodTyp Method
e Type BSC6900 SET USMLC(Optional)
OverLay
Network
OverLayMobilityFla Mobility
g Flag BSC6900 ADD UEXT3GCELL(Optional)
AAL2 path
OWNERSHIP ownership BSC6900 ADD AAL2PATH(Optional)
Destination
ATM
address
OWNERSHIP ownership BSC6900 ADD AAL2RT(Optional)
Paging
control
PAGECTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Paging
restore
PAGERTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Paging
flow control
PAGESW switch BSC6900 SET FCSW(Optional)
IP path
PATHCHK check flag BSC6900 ADD IPPATH(Optional)
ADD IPMUX(Mandatory)
PATHID IP path ID BSC6900 ADD IPPATHBIND(Mandatory)
AAL2 path
PATHID ID BSC6900 SET VCLLOP(Optional)
IP path
PATHT type BSC6900 ADD IPPATH(Optional)
CON PATCH(Optional)
PATTYPE Patch type BSC6900 LOD PATCH(Optional)
PCH
power[0.1d
PCHPower B] BSC6900 ADD UPCH(Optional)
PCPICH
transmit
power[0.1d ADD UPCPICH(Optional)
PCPICHPower Bm] BSC6900 ADD UCELLQUICKSETUP(Optional)
Pilot power
PCPICHPowerPac adjustment
e step BSC6900 ADD UCELLLDB(Optional)
Peak cell
PCR rate BSC6900 ADD ATMTRF(Optional)
Power
control
PcSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
PENDING
PDTMRVALUE timer BSC6900 ADD M3LKS(Optional)
Peer IP
PEERIP address BSC6900 ADD MPGRP(Mandatory)
Peer IP
PEERIP address BSC6900 STR IPCHK(Mandatory)
Peer IP
PEERIP address BSC6900 STR IPLOPTST(Mandatory)
First
destination
PEERIP1 IP address BSC6900 ADD SCTPLNK(Mandatory)
Second
destination
PEERIP2 IP address BSC6900 ADD SCTPLNK(Optional)
Peer IP
PEERIPADDR address BSC6900 ADD IPPATH(Mandatory)
Peer IP
PEERIPADDR address BSC6900 LOP VCL(Mandatory)
Peer IP
PEERIPADDR address BSC6900 ADD IPOAPVC(Mandatory)
Peer IP
PEERIPADDR address BSC6900 SET VCLLOP(Optional)
Peer Cell
Is Valid Or ADD UCELLSETUP(Optional)
PeerIsValid Not BSC6900 ADD UCELLQUICKSETUP(Optional)
Peer
subnet
PEERMASK mask BSC6900 ADD IPPATH(Optional)
Peer
PeerNodebId NodeB ID BSC6900 ADD UNODEB(Mandatory)
Destination
SCTP port
PEERPN No. BSC6900 ADD SCTPLNK(Mandatory)
Peer RNC
PeerRncId ID BSC6900 ADD UNODEB(Mandatory)
Neighborin
g BSC Slot
PeerSN No. BSC6900 ADD UIURGCONN(Mandatory)
Neighborin
g BSC
Subrack
PeerSRN No. BSC6900 ADD UIURGCONN(Mandatory)
Neighborin
g BSC
Subsystem
PeerSSN No. BSC6900 ADD UIURGCONN(Mandatory)
Inter-Rat
HO
PEERT Peer type BSC6900 ADD IPOAPVC(Mandatory)
physical
channel SET UINTERRATHOCOV(Optional)
failure SET UINTERRATHONCOV(Optional)
PenaltyTimeForPhy penalty ADD UCELLINTERRATHOCOV(Optional)
ChFail timer[s] BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Inter-RAT
Penalty
timer
PenaltyTimer length[s] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Pending
time after
trigger
PendingTime4A 4A[ms] BSC6900 ADD UTYPRABDCCCMC(Optional)
Pending
time after
trigger
PendingTime4B 4B[ms] BSC6900 ADD UTYPRABDCCCMC(Optional)
Event A
pending
time after
PendingTimeA trigger BSC6900 ADD UTYPRABRLC(Optional)
Event B
pending
time after
PendingTimeB trigger BSC6900 ADD UTYPRABRLC(Optional)
Ping Check
PERIOD Period BSC6900 ADD IPPATH(Optional)
2B event
retry
period[500 SET UINTERFREQHOCOV(Optional)
PeriodFor2B ms] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
2C event
retry SET UINTERFREQHONCOV(Optional)
period[500 ADD
PeriodFor2C ms] BSC6900 UCELLINTERFREQHONCOV(Optional)
3A event
retry
period[500 SET UINTERRATHOCOV(Optional)
PeriodFor3A ms] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3C event
retry
period[500 SET UINTERRATHONCOV(Optional)
PeriodFor3C ms] BSC6900 ADD UCELLINTERRATHONCOV(Optional)
1A event to
PeriodMRReportNu periodical SET UINTRAFREQHO(Optional)
mfor1A rpt number BSC6900 ADD UCELLINTRAFREQHO(Optional)
1C event to
PeriodMRReportNu periodical SET UINTRAFREQHO(Optional)
mfor1C rpt number BSC6900 ADD UCELLINTRAFREQHO(Optional)
1J event to
PeriodMRReportNu periodical SET UINTRAFREQHO(Optional)
mfor1J rpt number BSC6900 ADD UCELLINTRAFREQHO(Optional)
Period
common
measure
PeriodProtectTimer protect SET ULDM(Optional)
Coeff timer coeff BSC6900 SET USATLDM(Optional)
Persist
PersistScalingFact Scaling
or Factor BSC6900 ADD UPRACHASC(Mandatory)
Protocal
field
PFC compress BSC6900 ADD PPPLNK(Optional)
Protocol
field
PFC compress BSC6900 ADD MPGRP(Optional)
Per-Hop
PHB Behavior BSC6900 SET PHBMAP(Mandatory)
PCCPCH
PhyChId ID BSC6900 ADD UPCCPCH(Optional)
ADD UPCH(Mandatory)
SCCPCH ADD UPICH(Mandatory)
PhyChId ID BSC6900 ADD USCCPCHBASIC(Mandatory)
PICH
PICHMode mode BSC6900 ADD UPICH(Optional)
PICH
power
PICHPowerOffset offset[dB] BSC6900 ADD UCHPWROFFSET(Optional)
Interface
Board Slot
PIUSN No. BSC6900 STR IPLOPTST(Mandatory)
Private Key
Password
Enabled
PKPEnableSta State BSC6900 SET CERTFILE(Optional)
PKT
PKTLEN Size[Byte] BSC6900 STR ETHOAMLOOPTST(Optional)
Max
Packet
Length[Byt
PKTMAXLEN e] BSC6900 STR IPLOPTST(Optional)
Size of
PKTSIZE packet BSC6900 PING IP(Optional)
SET MSPCMD(Mandatory)
PN Port No. BSC6900 SET MSP(Mandatory)
PN Port No. BSC6900 SET E1T1LOP(Optional)
LOP E1T1(Optional)
PN Port No. BSC6900 SET E1T1(Optional)
Physics
PN port No. BSC6900 ADD IPLOGICPORT(Optional)
STR IPCHK(Optional)
PN Port No. BSC6900 STR ETHOAMLOOPTST(Mandatory)
Rollback
Point
POINTDESINFO Description BSC6900 ADD ROLLBACKPOINT(Optional)
Rollback BEG ROLLBACK(Mandatory)
Point BEG FORWARD(Mandatory)
POINTNAME Name BSC6900 ADD ROLLBACKPOINT(Mandatory)
Poll timer
length[10
PollTimerLen ms] BSC6900 SET UQUEUEPREEMPT(Optional)
Destination
Port Port BSC6900 ADD FTPSCLTDPORT(Mandatory)
Port
protocol
PORTPROTYPE type BSC6900 ADD PORTFLOWCTRLPARA(Mandatory)
Switch for
POWER_RELAY1 Relay 1 BSC6900 ADD EMU(Optional)
Switch for
POWER_RELAY2 Relay 2 BSC6900 ADD EMU(Optional)
Switch for
POWER_RELAY3 Relay 3 BSC6900 ADD EMU(Optional)
Switch for
POWER_RELAY4 Relay 4 BSC6900 ADD EMU(Optional)
Switch for
POWER_RELAY5 Relay 5 BSC6900 ADD EMU(Optional)
Switch for
POWER_RELAY6 Relay 6 BSC6900 ADD EMU(Optional)
Power
PowerOffsetPpm offset[dB] BSC6900 ADD UPRACHTFC(Mandatory)
Power
increase
PowerRampStep step[dB] BSC6900 ADD UPRACHBASIC(Optional)
PPP link
PPPLNKN No. BSC6900 ADD PPPLNK(Optional)
PPP sub-
PPPLNKN link No. BSC6900 ADD MPLNK(Optional)
PPP link
PPPLNKN No. BSC6900 ADD IPLOGICPORT(Optional)
ADD PPPLNK(Optional)
PPPMUX PPP mux BSC6900 ADD MPGRP(Optional)
Priority
queue
PQNUM number BSC6900 ADD PORTFLOWCTRLPARA(Optional)
Inter-
PRACHPhyChId PRACH ID BSC6900 ADD UAICH(Optional)
frequency
measure
periodical SET UINTERFREQHOCOV(Optional)
rpt ADD UCELLINTERFREQHOCOV(Optional)
PrdReportInterval period[ms] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Max
preamble
PreambleRetransM retransmis
ax sion BSC6900 ADD UPRACHBASIC(Optional)
PreambleSignature Preamble
s signatures BSC6900 ADD UPRACHBASIC(Mandatory)
Preempt
algorithm
PreemptAlgoSwitch switch BSC6900 SET UQUEUEPREEMPT(Optional)
PreemptRefArpSwit PreemptRe
ch fArpSwitch BSC6900 SET UQUEUEPREEMPT(Optional)
Print
control
PRINTCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Print
control
PRINTCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Print
restore
PRINTRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Print
restore
PRINTRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Print Flow
control
PRINTSW switch BSC6900 SET FCSW(Optional)
Block
Priority priority BSC6900 BLK UCELL(Optional)
Integrate
Priority
Configured
PriorityReference Reference BSC6900 SET UUSERPRIORITY(Optional)
Service
priority of
PriorityServiceForE Other
xtRab service BSC6900 ADD USPG(Optional)
Service
priority of
PriorityServiceForH HSDPA
SDPA service BSC6900 ADD USPG(Optional)
Service
priority of
PriorityServiceForH HSUPA
SUPA service BSC6900 ADD USPG(Optional)
Service
priority of
PriorityServiceForR R99 NRT
99NRT service BSC6900 ADD USPG(Optional)
Service
priority of
PriorityServiceForR R99 RT
99RT service BSC6900 ADD USPG(Optional)
Private Key
PrivKey File Name BSC6900 SET CERTFILE(Optional)
PROCESSSWITC Process
H switch BSC6900 SET URRCTRLSWITCH(Optional)
SS7
protocol
PROT type BSC6900 ADD N7DPC(Optional)
Backgroun
d service
ProtectTmrForBac T2[s] BSC6900 SET UPSINACTTIMER(Optional)
Conversati
onal
service
ProtectTmrForCon T2[s] BSC6900 SET UPSINACTTIMER(Optional)
Interactive
service
ProtectTmrForInt T2[s] BSC6900 SET UPSINACTTIMER(Optional)
Streaming
service
ProtectTmrForStr T2[s] BSC6900 SET UPSINACTTIMER(Optional)
DL primary
scrambling
PScrambCode code BSC6900 ADD UEXT3GCELL(Mandatory)
DL primary
scrambling ADD UCELLSETUP(Mandatory)
R99 PS
PScrambCode code BSC6900 ADD UCELLQUICKSETUP(Mandatory)
high
interactive
pri path
R99 PS
PSHIGHINTERAC load
high
TPRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
PSHIGHINTERAC ratio
TSECWHT threshold BSC6900 ADD LOADEQ(Optional)
PS domain
PSHOOut2GloadT Reloc GSM SET UINTERRATHONCOV(Optional)
hd load THD BSC6900 ADD UCELLINTERRATHONCOV(Optional)
Backgroun
d service
PsInactTmrForBac T1[s] BSC6900 SET UPSINACTTIMER(Optional)
Conversati
onal
service
PsInactTmrForCon T1[s] BSC6900 SET UPSINACTTIMER(Optional)
Interactive
service
PsInactTmrForInt T1[s] BSC6900 SET UPSINACTTIMER(Optional)
Streaming
service
PsInactTmrForStr T1[s] BSC6900 SET UPSINACTTIMER(Optional)
PS
Information
Update
PsInfoUpdFlag Switch BSC6900 SET UOPERATORCFGPARA(Optional)
PS
Information
Update
Protection
UMTS R99
PsInfoUpdTmr Timer BSC6900 SET UOPERATORCFGPARA(Mandatory)
PS
interactive
service
downlink
UMTS R99
PSINTERDL factor BSC6900 ADD TRMFACTOR(Optional)
PS
interactive
service
uplink
PSINTERUL factor BSC6900 ADD TRMFACTOR(Optional)
R99 PS
high PRI
interactive
PSINTHGHPRIPAT primary
H path BSC6900 ADD TRMMAP(Optional)
R99 PS
high PRI
interactive
PSINTHGHSECPA secondary
TH path BSC6900 ADD TRMMAP(Optional)
R99 PS
low PRI
interactive
PSINTLOWPRIPA primary
TH path BSC6900 ADD TRMMAP(Optional)
R99 PS
low PRI
interactive
PSINTLOWSECPA secondary
TH path BSC6900 ADD TRMMAP(Optional)
R99 PS
middle PRI
interactive
PSINTMIDPRIPAT primary
H path BSC6900 ADD TRMMAP(Optional)
R99 PS
middle PRI
interactive
PSINTMIDSECPAT secondary
R99 PS
H path BSC6900 ADD TRMMAP(Optional)
low
interactive
pri path
R99 PS
PSLOWINTERACT load
low
PRITH threshold BSC6900 ADD LOADEQ(Optional)
interactive
pri sec
path load
PSLOWINTERACT ratio
R99 PS
SECWHT threshold BSC6900 ADD LOADEQ(Optional)
mid
interactive
pri path
PSMIDINTERACT load
PRITH threshold BSC6900 ADD LOADEQ(Optional)
R99 PS
mid pri sec
path load
PSMIDINTERACT ratio
SECWHT threshold BSC6900 ADD LOADEQ(Optional)
Feature
Supporting
Mode of
PsNriCfgMode PS Domain BSC6900 SET UOPERATORCFGPARA(Optional)
Length of
PS NRI in
PSNRILength bits BSC6900 SET UOPERATORCFGPARA(Mandatory)
Threshold
of PS Call
PsRabAbnormRelR Drop
atioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Minimum
Number of
PS RAB
PsRabEstAttMinNu Establish
m Request BSC6900 SET UKPIALMTHD(Optional)
Threshold
of PS RAB
Setup
PsRabEstSuccRati Successful
oThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Minimum
Number of
PS Call
PsRabRelMinNum Release BSC6900 SET UKPIALMTHD(Optional)
Restriction ADD
PsRestriction for PS BSC6900 UCELLDSACMANUALPARA(Mandatory)
Restriction
PsRestriction for PS BSC6900 SET UDSACAUTOALGO(Mandatory)
Inter-RAT
PS
PSServiceHOSwitc handover
UMTS R99
h switch BSC6900 ADD UCELLHOCOMM(Optional)
PS
streaming
service
downlink
PSSTRMDL factor BSC6900 ADD TRMFACTOR(Optional)
R99 PS
streaming
primary
PSSTRMPRIPATH path BSC6900 ADD TRMMAP(Optional)
R99 PS
streaming
pri path
load
PSSTRMPRITH threshold BSC6900 ADD LOADEQ(Optional)
R99 PS
streaming
PSSTRMSECPAT secondary
R99 PS
H path BSC6900 ADD TRMMAP(Optional)
streaming
pri sec
path load
ratio
UMTS R99
PSSTRMSECWHT threshold BSC6900 ADD LOADEQ(Optional)
PS
streaming
service
uplink
PSSTRMUL factor BSC6900 ADD TRMFACTOR(Optional)
PS rate
negotiation
PsSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
PS
throughput
Psthroughput only-kbps BSC6900 SET LICENSE(Optional)
Self-
healing
Switch for
OMU
PSW Process BSC6900 SET SLFSLVSW(Optional)
PT Port Type BSC6900 SET ALMPORT(Mandatory)
NodeB
Port IP
PTIP Address BSC6900 ADD UNODEBESN(Mandatory)
NodeB
Port IP
PTIPMASK Mask BSC6900 ADD UNODEBESN(Mandatory)
Ptm Null
Stream
PtmNullStrmPasiS Passivity
witch Switch BSC6900 SET URNCMBMSPARA(Optional)
Ptm
Preempt
PtmPreemptSwitch Switch BSC6900 SET URNCMBMSPARA(Optional)
Ptm
Stream
Passivity
PtmStrmPasiSwitch Switch BSC6900 SET URNCMBMSPARA(Optional)
Frame
receive
PTRXT Structure BSC6900 SET E1T1(Optional)
Frame
send
PTTXT Structure BSC6900 SET E1T1(Optional)
Frame
PTTYPE Structure BSC6900 SET E1T1(Optional)
PUC
smoothing SET ULDM(Optional)
PucAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
PUC
period
PucPeriodTimerLe timer SET ULDCPERIOD(Optional)
n length BSC6900 SET USATLDCPERIOD(Optional)
Punish
PunishTime Time[s] BSC6900 SET URNCMBMSPARA(Optional)
Private Key
PWD Password BSC6900 SET CERTFILE(Mandatory)
ADD OP(Mandatory)
DLD LICENSE(Mandatory)
PWD Password BSC6900 ULD LICENSE(Mandatory)
Minimum
Password
PwdMinLen Length BSC6900 SET PWDPOLICY(Optional)
First Alarm
PWRALMSSW1 Switch BSC6900 SET PWRALMSW(Optional)
Second
Alarm
PWRALMSSW2 Switch BSC6900 SET PWRALMSW(Optional)
Power
control
algorithm
PwrCtrlAlg selection BSC6900 SET UFRC(Optional)
Min DSCP
Q0MINDSCP of queue 0 BSC6900 SET QUEUEMAP(Optional)
Min DSCP
Q1MINDSCP of queue 1 BSC6900 SET QUEUEMAP(Optional)
Min DSCP
Q2MINDSCP of queue 2 BSC6900 SET QUEUEMAP(Optional)
Min DSCP
Q3MINDSCP of queue 3 BSC6900 SET QUEUEMAP(Optional)
Min DSCP
Q4MINDSCP of queue 4 BSC6900 SET QUEUEMAP(Optional)
Qaal2
Protocol
QAAL2VER Version BSC6900 ADD ADJNODE(Optional)
Quality
threshold
for HCS ADD UEXT3GCELL(Optional)
Qhcs reselection BSC6900 ADD UEXT2GCELL(Optional)
Quality
threshold
for HCS
reselection[
Qhcs dB/dBm] BSC6900 ADD UCELLHCS(Optional)
Hysteresis
1for UE in
CELL_FAC
Hysteresis
Qhyst1sfach H state BSC6900 ADD UCELLSELRESEL(Optional)
1 for UE in
CELL_PC
H or
URA_PCH
Qhyst1spch state BSC6900 ADD UCELLSELRESEL(Optional)
Hysteresis
2 for UE in
CELL_FAC
Hysteresis
Qhyst2sfach H state BSC6900 ADD UCELLSELRESEL(Optional)
2 for UE in
CELL_PC
H or
URA_PCH
Qhyst2spch state BSC6900 ADD UCELLSELRESEL(Optional)
Qoffset1sn[
Qoffset1sn dB] BSC6900 ADD U2GNCELL(Optional)
Min quality
Qqualmin level[dB] BSC6900 ADD UEXT3GCELL(Mandatory)
Min quality
Qqualmin level[dB] BSC6900 ADD UCELLSELRESEL(Optional)
Min quality
QqualminInd level ind BSC6900 ADD UEXT3GCELL(Optional)
Min RX
Qrxlevmin level[dBm] BSC6900 ADD UEXT3GCELL(Mandatory)
Min RX
Qrxlevmin level[dBm] BSC6900 ADD U2GNCELL(Optional)
Min Rx
level[2dBm
Qrxlevmin ] BSC6900 ADD UCELLSELRESEL(Optional)
Min Rx
level
Extend
QrxlevminExtSup Support BSC6900 ADD UEXT3GCELL(Optional)
Min Rx
level
Extend
QrxlevminExtSup Support BSC6900 ADD UCELLSELRESEL(Optional)
Min RX
QrxlevminInd level ind BSC6900 ADD UEXT3GCELL(Optional)
Cell Sel-
reselection
quality
QualMeas measure BSC6900 ADD UCELLSELRESEL(Optional)
Queue
algorithm
QueueAlgoSwitch switch BSC6900 SET UQUEUEPREEMPT(Optional)
Queue
QueueLen length BSC6900 SET UQUEUEPREEMPT(Optional)
ADD UTYPRABQUALITYMEAS(Mandatory)
Service ADD UTYPRABDCCCMC(Mandatory)
parameter ADD UTYPRABHSPA(Mandatory)
RabIndex index BSC6900 ADD UTYPRABRLC(Mandatory)
Service
parameter
RabIndex index BSC6900 ADD UTYPRABBASIC(Mandatory)
Service
parameter
RabIndex index BSC6900 ADD UTYPRABOLPC(Mandatory)
Rab Modify
RabModifyTimerLe Timer
n Length[s] BSC6900 SET UCOIFTIMER(Optional)
ADD UEXT3GCELL(Mandatory)
ADD UEXT2GCELL(Mandatory)
ADD UCELLSETUP(Mandatory)
Routing ADD UCELLQUICKSETUP(Mandatory)
RAC area code BSC6900 ADD URAC(Mandatory)
RACH sub
channel
RACHSubChNo no. BSC6900 ADD UPRACHBASIC(Mandatory)
RAN
RANSharingSuppor Sharing SET
t Support BSC6900 UOPERATORSHARINGMODE(Optional)
Inter-RAT
RatCellType cell type BSC6900 ADD UEXT2GCELL(Mandatory)
Rate
matching ADD UFACH(Optional)
RateMatchingAttr attribute BSC6900 ADD UPCH(Optional)
Rate
matching
RateMatchingAttr attribute BSC6900 ADD URACH(Optional)
DL TF rate
recover
RateRecoverTimer timer
Len length[ms] BSC6900 ADD UCELLOLC(Optional)
DL TF rate
restrict
RateRstrctCoef coefficient BSC6900 ADD UCELLOLC(Optional)
DL TF rate
restrict
RateRstrctTimerLe timer
n length[ms] BSC6900 ADD UCELLOLC(Optional)
Type of
Rollback
RBPTYPE Point BSC6900 BEG FORWARD(Mandatory)
Wait RB
reconfigura
tion
response
RbRecfgRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Wait RB
release
response
RbRelRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Wait RB
setup
response
RbSetupRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Result
Recording
RCDT Type BSC6900 RUN BATCHFILE(Optional)
Rate down
coefficient
RDC [%] BSC6900 ADD IPLOGICPORT(Optional)
Recounting
RecountingPeriod Period[s] BSC6900 SET URNCMBMSPARA(Optional)
DL TF rate
recover
RecoverCoef coefficient BSC6900 ADD UCELLOLC(Optional)
Decrease
rate alarm
recover
RECOVERTHD threshold BSC6900 ADD IPLOGICPORT(Optional)
Redirection
Factor Of
RedirFactorOfLDR LDR[%] BSC6900 ADD UCELLREDIRECTION(Optional)
Redirection
Factor Of
RedirFactorOfLDR LDR[%] BSC6900 SET UREDIRECTION(Optional)
Redirection
Factor Of
RedirFactorOfNorm Normal[%] BSC6900 ADD UCELLREDIRECTION(Optional)
Redirection
Factor Of
RedirFactorOfNorm Normal[%] BSC6900 SET UREDIRECTION(Optional)
Port for
REF2MCLKSRC LINE1 BSC6900 SET CLK(Optional)
Back-up
REF2MCLKSRCBA port for
K LINE1 BSC6900 SET CLK(Optional)
Switch of
panel 2M
REF2MCLKSW1 BITS1 BSC6900 SET CLK(Optional)
Switch of
panel 2M
REF2MCLKSW2 BITS2 BSC6900 SET CLK(Optional)
Use SGSN
REFUSELOCALCL clock
K source BSC6900 SET CLK(Optional)
Register
Bear by
Fach
RegByFachSwitch Switch BSC6900 SET UCALLSHOCKCTRL(Optional)
Re-host
Policy
ReHostPolicy Type BSC6900 SET UPOOLPRIMHOSTPOLICY(Optional)
Release
indication
RELINDTMR timer BSC6900 SET AAL2TMR(Optional)
Relocation
another
request
RelocAnotherTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
Command
RelocCmdTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
commit
RelocCommitTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
data
forwarding
RelocDataFwdTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
failed IU
release
RelocFailIuRelCmd command
Tmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
Iu release
command
RelocIuRelCmdTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
mobile info
RelocMobilConfTm confirmatio
r n timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
PhyCh
reconfigura
RelocPhychRecfgT tion
mr timer[ms] BSC6900 SET USTATETIMER(Optional)
Relocation
Inter-RAT
HO
RelocUtranHoCmp completion
Tmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Release
request
RELREQTMR timer BSC6900 SET AAL2TMR(Optional)
Relative
threshold
of SHO
RelThdForDwnGrd failure[dB] BSC6900 SET UINTRAFREQHO(Optional)
ADD TRMMAP(Optional)
ADD TRMFACTOR(Mandatory)
REMARK Remark BSC6900 ADD LOADEQ(Mandatory)
Traffic use
REMARK description BSC6900 ADD ATMTRF(Optional)
Route use
REMARK description BSC6900 ADD IPRT(Mandatory)
Repeat
RepeatNum Number BSC6900 SET URNCCBPARA(Optional)
Repeat
RepeatPeriod Period[s] BSC6900 SET URNCCBPARA(Optional)
1A event to
periodical
rpt SET UINTRAFREQHO(Optional)
ReportIntervalfor1A period[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1C event to
periodical
rpt SET UINTRAFREQHO(Optional)
ReportIntervalfor1C period[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1J event to
periodical
rpt SET UINTRAFREQHO(Optional)
ReportIntervalfor1J period[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
Required
2G
Req2GCap Capability BSC6900 ADD UTYPRABBASIC(Mandatory)
Resource
Audit
control
RESAUDITCTHD threshold BSC6900 SET FCCPUTHD(Optional)
Resource
Audit
control
RESAUDITCTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Resource
Audit
restore
RESAUDITRTHD threshold BSC6900 SET FCCPUTHD(Optional)
Resource
Audit
restore
RESAUDITRTHD threshold BSC6900 SET FCMSGQTHD(Optional)
Resource
audit flow
control
RESAUDITSW switch BSC6900 SET FCSW(Optional)
CORRM
Algo
reserved
ReservedSwitch0 switch 0 BSC6900 SET UCORRMALGOSWITCH(Optional)
CORRM
Algo
reserved
ReservedSwitch1 switch 1 BSC6900 SET UCORRMALGOSWITCH(Optional)
CORRM
Algo
reserved
ReservedU32Para0 U32 Para 0 BSC6900 SET UCORRMALGOSWITCH(Optional)
CORRM
Algo
reserved
ReservedU32Para1 U32 Para 1 BSC6900 SET UCORRMALGOSWITCH(Optional)
CORRM
Algo
reserved
ReservedU8Para0 U8 Para 0 BSC6900 SET UCORRMALGOSWITCH(Optional)
CORRM
Algo
reserved
ReservedU8Para1 U8 Para 1 BSC6900 SET UCORRMALGOSWITCH(Optional)
Reset
Interval of
Account
Lock
RESETINTERVAL Counter BSC6900 SET PWDPOLICY(Optional)
Reset
request
RESREQTMR timer BSC6900 SET AAL2TMR(Optional)
Resume
Broken
Downloads DLD LICENSE(Optional)
REST Flag BSC6900 ULD LICENSE(Optional)
Sub-
protocol
negotiate
RESTARTTMR out time[S] BSC6900 ADD PPPLNK(Optional)
Sub-
protocol
negotiate
RESTARTTMR out time[S] BSC6900 ADD MPLNK(Optional)
Restriction ADD
RestrictionType Type BSC6900 UCELLDSACMANUALPARA(Mandatory)
Alarm
Restore EXP ALMLOG(Optional)
RESTYPE Type BSC6900 STA ALMLOG(Optional)
re-TX
ReTransRatioFilter measure
Coef filter coef BSC6900 ADD UTYPRABRLC(Optional)
BIT MAP of
retry HSPA
PLUS
RetryCapability character BSC6900 SET UFRC(Optional)
Execute
RFT Interval BSC6900 ADD SUBTSK(Optional)
RLC mode
RlcMode selection BSC6900 ADD UTYPRABRLC(Mandatory)
Channel
RLCN No. BSC6900 SET E1T1LOP(Optional)
ADD UFACHDYNTFS(Mandatory)
RLC ADD UPCHDYNTFS(Mandatory)
RLCSize size[bit] BSC6900 ADD URACHDYNTFS(Mandatory)
RL Max DL
RlMaxDlPwr TX power BSC6900 ADD UCELLRLPWR(Mandatory)
RL Min DL
RlMinDlPwr TX power BSC6900 ADD UCELLRLPWR(Mandatory)
RL
reconfigura
tion
RlRecfgReadyTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RL release
RlRelRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RL
restoration
RlRstrTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RL setup
response
RlSetupRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
CBS RNC
RNCIPADDR IP address BSC6900 ADD UCBSADDR(Mandatory)
RNC
protocol
RncProtclVer version BSC6900 ADD UNRNC(Mandatory)
Root
Certificate
RootCert File Name BSC6900 SET CERTFILE(Optional)
Decrease
rate alarm
report
RPTTHD threshold BSC6900 ADD IPLOGICPORT(Optional)
Cause of
RRC
connection
establishm
The
RrcCause ent BSC6900 SET URRCESTCAUSE(Mandatory)
minimum
of Rrc
connection
RrcConnEstabAttMi request
Threshold
nNum Per CPUS. BSC6900 SET UKPIALMTHD(Optional)
of RRC
Connection
Setup
RrcConnEstabSucc Successful
RatioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Wait Time
In RRC
Connection
RrcConnRejWaitT Reject
mr Message[s] BSC6900 SET USTATETIMER(Optional)
RRC initial
DT
RrcInitDtTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RRC IU
release
command
RrcIuRelCmdTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RRC
paging
type 1
response
RrcPaingType1Tmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RRC
release
retransmis
sion
RrcRelRetranTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RRC RLC
completion
acknowled
gement
RrcRlcAckCmpTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RRC
security
mode
RrcSecrtModeCmp completion
Tmr timer[ms] BSC6900 SET USTATETIMER(Optional)
RRC UE
response
RrcUeRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
Add To
Rscgrp
RSCGRPFLAG Flag BSC6900 ADD AAL2PATH(Mandatory)
ADD AAL2PATH(Mandatory)
RSCGRPN Rscgrp No. BSC6900 ADD IPPATH(Mandatory)
Resource
Manageme
RSCMNGMODE nt Mode BSC6900 ADD RSCGRP(Mandatory)
Resource
manageme
RSCMNGMODE nt mode BSC6900 ADD ATMLOGICPORT(Optional)
Resource
manageme
RSCMNGMODE nt mode BSC6900 ADD IPLOGICPORT(Optional)
Resource
Manageme
RscMngMode nt Mode BSC6900 ADD UNODEB(Optional)
Lock
RSNDES Reason BSC6900 LCK CMCTRL(Mandatory)
Timer_No-
RSPTMR Response BSC6900 ADD SAALLNK(Optional)
Result File
RSTF Name BSC6900 RUN BATCHFILE(Optional)
Restart
RSTFUN switch BSC6900 ADD OPC(Optional)
Times of
resending
reset
message
RstRsndNum to CN BSC6900 SET UIUTIMERANDNUM(Optional)
Reserved
Parameter
RsvdPara1 1 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
parameter
RsvdPara1 1 BSC6900 ADD UCELLALGOSWITCH(Optional)
Reserved
parameter
RsvdPara1 1 BSC6900 ADD UNODEBALGOPARA(Optional)
Reserved
parameter
RsvdPara1 1 BSC6900 SET UCACALGOSWITCH(Optional)
Reserved
Parameter
RSVDPARA1 1 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara10 10 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA10 10 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara11 11 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RsvdPara12 12 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RsvdPara13 13 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RsvdPara14 14 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RsvdPara15 15 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RsvdPara16 16 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RsvdPara2 2 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
parameter ADD UNRNC(Optional)
RsvdPara2 2 BSC6900 ADD UCNNODE(Optional)
Reserved
parameter
RsvdPara2 2 BSC6900 ADD UCELLALGOSWITCH(Optional)
Reserved
parameter
RsvdPara2 2 BSC6900 ADD UNODEBALGOPARA(Optional)
Reserved
parameter
RsvdPara2 2 BSC6900 SET UCACALGOSWITCH(Optional)
Reserved
Parameter
RSVDPARA2 2 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara3 3 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
parameter
RsvdPara3 3 BSC6900 ADD UCELLALGOSWITCH(Optional)
Reserved
parameter
RsvdPara3 3 BSC6900 ADD UNODEBALGOPARA(Optional)
Reserved
parameter
RsvdPara3 3 BSC6900 SET UCACALGOSWITCH(Optional)
Reserved
Parameter
RSVDPARA3 3 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara4 4 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA4 4 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara5 5 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA5 5 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara6 6 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA6 6 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara7 7 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA7 7 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara8 8 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA8 8 BSC6900 SET TRANSPATCHPARA(Optional)
Reserved
Parameter
RsvdPara9 9 BSC6900 SET UDPUCFGDATA(Optional)
Reserved
Parameter
RSVDPARA9 9 BSC6900 SET TRANSPATCHPARA(Optional)
Revertive
RT type BSC6900 SET MSP(Optional)
RTCP
RTCPSwitch SWITCH BSC6900 ADD UCNNODE(Optional)
Destination
Network
RTDEST Address BSC6900 ADD OMUIPRT(Mandatory)
Destination
Address
Realtime
RTDESTMASK Mask BSC6900 ADD OMUIPRT(Mandatory)
DCH or
HSPA to
E_FACH
RtDH2EFachState Transition
TransTimer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
Realtime
DCH or
HSPA To
FACH
RtDH2FStateTrans Transition
Timer Timer[s] BSC6900 SET UUESTATETRANSTIMER(Optional)
RT
D/HSPA2F
4B
Pending
RtDH2FTvmPTAT Time[ms] BSC6900 SET UUESTATETRANS(Optional)
RT
D/HSPA2F
4B
Threshold[
RtDH2FTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
RT
D/HSPA2F
RtDH2FTvmTimeT 4B
RT
oTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
E_FACH2
CPC_HSP
A 4A
RtEFach2CpcTvmT Threshold[
hd byte] BSC6900 SET UUESTATETRANS(Optional)
RT
E_FACH2
CPC_HSP
RtEFach2CpcTvmT A 4A
RT
imeToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
E_FACH2
D/HSPA
4A
RtEFach2DHTvmT Threshold[
hd byte] BSC6900 SET UUESTATETRANS(Optional)
RT
E_FACH2
D/HSPA
RtEFach2DHTvmTi 4A
meToTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
RT
F2CPC_H
SPA 4A
Threshold[
RtF2CpcTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
RT
F2CPC_H
RtF2CpcTvmTimeT SPA 4A
oTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
RT
F2D/HSPA
4A
Threshold[
RtF2DHTvmThd byte] BSC6900 SET UUESTATETRANS(Optional)
RT
F2D/HSPA
RtF2DHTvmTimeT 4A
oTrig Time[ms] BSC6900 SET UUESTATETRANS(Optional)
RTO alpha
RTOALPHA value BSC6900 ADD SCTPLNK(Optional)
RTO beta
RTOBETA value BSC6900 ADD SCTPLNK(Optional)
RTO initial
RTOINIT value BSC6900 ADD SCTPLNK(Optional)
RTO max
RTOMAX value BSC6900 ADD SCTPLNK(Optional)
RTO min
RTOMIN value BSC6900 ADD SCTPLNK(Optional)
Route
RTX index BSC6900 ADD AAL2RT(Optional)
Rate up
RUS step [kbps] BSC6900 ADD IPLOGICPORT(Optional)
Rate up
step adjust
period
RUSPRD [PLPRD] BSC6900 ADD IPLOGICPORT(Optional)
Backward
RXBW Bandwidth BSC6900 ADD IPPATH(Mandatory)
Backward
RxBw Bandwidth BSC6900 ADD RSCGRP(Mandatory)
Backward
bandwidth
RXBW [kbps] BSC6900 ADD ATMLOGICPORT(Mandatory)
RX traffic
record
RXTRFX index BSC6900 ADD SAALLNK(Mandatory)
RX traffic
record
RXTRFX index BSC6900 ADD AAL2PATH(Mandatory)
RX traffic
record
RXTRFX index BSC6900 ADD IPOAPVC(Optional)
RX traffic
record
RXTRFX index BSC6900 ADD VPCLCX(Mandatory)
6F event
trigger
threshold[c
RxTxtoTrig6F hip] BSC6900 SET UHOCOMM(Optional)
6G event
trigger
threshold[c
RxTxtoTrig6G hip] BSC6900 SET UHOCOMM(Optional)
ADD MTP3LNK(Mandatory)
ADD SAALLNK(Mandatory)
S1VALUE S1 Value BSC6900 SET OPT(Optional)
ADD ADJNODE(Mandatory)
LOP VCL(Mandatory)
SET VCLLOP(Optional)
SAAL link ADD UCCP(Mandatory)
SAALLNKN No. BSC6900 ADD UNCP(Mandatory)
Interface
SAALLNKT type BSC6900 ADD SAALLNK(Mandatory)
SAAL link
connection
SAALTMR timer BSC6900 SET MTP3TMR(Optional)
ADD UCZ(Mandatory)
ADD UCELLSETUP(Mandatory)
Service ADD UCELLQUICKSETUP(Mandatory)
SAC area code BSC6900 ADD USAC(Mandatory)
Satellite
SATELLITEIND Trans Ind BSC6900 ADD UNODEB(Optional)
SCCPCH
SCCPCHOffset offset BSC6900 ADD USCCPCHBASIC(Optional)
Command ADD SUBTSK(Mandatory)
SCMD String BSC6900 ADD SUBCMD(Mandatory)
Sustainabl
SCR e cell rate BSC6900 ADD ATMTRF(Optional)
Scrambling
ScrambCode code BSC6900 ADD USCCPCHBASIC(Mandatory)
Scramble
SCRAMBLESW Switch BSC6900 SET E1T1(Optional)
Scramble
SCRAMBLESW switch BSC6900 SET OPT(Optional)
Alarm Log
Saved
SD Time BSC6900 SET ALMCAPACITY(Optional)
SD Alarm
SDALMTHD Threshold BSC6900 SET MSP(Optional)
SDAY Start date BSC6900 SET TZ(Mandatory)
SDSF
Seed of
SDSFPRI Priority BSC6900 SET MSP(Optional)
the
pseudo-
random
sequence
Seed generator BSC6900 ADD UIPDL(Mandatory)
Sequence
of user
SeqOfUserRel release BSC6900 ADD UCELLOLC(Optional)
The
Command
Port of FTP
SERCMDPORT Server BSC6900 SET FTPSSRV(Mandatory)
The
Source
Date Port
of FTP
SERDATAPORT Server BSC6900 SET FTPSSRV(Mandatory)
FTP Server
ServerIP IP Address BSC6900 ADD FTPSCLTDPORT(Mandatory)
ADD UCELLMBMSFACH(Mandatory)
ADD UCELLMBMSSCCPCH(Mandatory)
SET UMBMSFACH(Mandatory)
Service Bit SET UMBMSSCCPCH(Mandatory)
ServiceBitRate Rate[kbit/s] BSC6900 SET UMTCH(Mandatory)
Service
ServiceDiffDrdSwit differential
ch drd switch BSC6900 ADD UCELLDRD(Optional)
Service
ServiceDiffDrdSwit differential
ch drd switch BSC6900 SET UDRD(Optional)
ServiceId Service ID BSC6900 SET UMBMSPERF(Mandatory)
CN domain
ServiceInd indication BSC6900 ADD UNRNC(Mandatory)
Service
ServiceName Name BSC6900 EXP LOG(Optional)
ADD UCELLMBMSFACH(Mandatory)
ADD UCELLMBMSSCCPCH(Mandatory)
SET UMBMSFACH(Mandatory)
Service SET UMBMSSCCPCH(Mandatory)
ServiceType Type BSC6900 SET UMTCH(Mandatory)
Set Object
SETOBJECT License BSC6900 SET LICENSE(Optional)
SGSN
SGSNFLG FLAG BSC6900 ADD ADJNODE(Mandatory)
Sharing out
SharingOutCAPSM capability
idLoad middle load BSC6900 SET UCTRLPLNSHAREPARA(Optional)
Sharing
Type Of
SharingType NodeB BSC6900 ADD UNODEB(Mandatory)
HCS inter-
rat
reselection
threshold[2
SHCSRat dB] BSC6900 ADD UCELLHCS(Optional)
Service
Handover
SHInd Indicator BSC6900 ADD UTYPRABBASIC(Mandatory)
Min Quality
THD For
SHOQualmin SHO[dB] BSC6900 SET USMLC(Mandatory)
Min quality
THD for SET UINTRAFREQHO(Optional)
SHOQualmin SHO[dB] BSC6900 ADD UCELLINTRAFREQHO(Optional)
SHO cross
SHOTRIG IUR trigger BSC6900 ADD UNRNC(Mandatory)
ADD UINTRAFREQNCELL(Optional)
SIB11 ADD UINTERFREQNCELL(Optional)
SIB11Ind Indicator BSC6900 ADD U2GNCELL(Optional)
ADD UINTRAFREQNCELL(Optional)
SIB12 ADD UINTERFREQNCELL(Optional)
SIB12Ind Indicator BSC6900 ADD U2GNCELL(Optional)
Signaling
SIGLNKID link ID BSC6900 ADD M3LNK(Mandatory)
Bearing
signal
SigRbInd indication BSC6900 ADD UFACH(Optional)
Signalling
Max Mode
SIGSLC link code BSC6900 ADD MTP3LNK(Mandatory)
Of
Narrowban
d AMRC
For Silver SET UAMRC(Optional)
Max Mode
SilverMaxMode Users BSC6900 ADD UCELLAMRC(Optional)
Of
Wideband
AMRC For
Silver SET UAMRCWB(Optional)
SilverMaxMode Users BSC6900 ADD UCELLAMRCWB(Optional)
Downlink
MBR of
Signal[kbit/
SingalDlMBR s] BSC6900 SET UUSERMBR(Optional)
Uplink
MBR of
Signal[kbit/
SingalUlMBR s] BSC6900 SET UUSERMBR(Optional)
Source IP
SIPADDR address BSC6900 PING IP(Mandatory)
Source IP
SIPADDR address BSC6900 TRC IPADDR(Optional)
UMTS IMS
SRB
service
downlink
SIPDL factor BSC6900 ADD TRMFACTOR(Optional)
IMS SRB
primary
SIPPRIPATH path BSC6900 ADD TRMMAP(Optional)
IMS Signal
pri path
load
SIPPRITH threshold BSC6900 ADD LOADEQ(Optional)
IMS SRB
secondary
SIPSECPATH path BSC6900 ADD TRMMAP(Optional)
IMS Signal
pri sec
path load
ratio
SIPSECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS IMS
SRB
service
uplink
HCS
SIPUL factor BSC6900 ADD TRMFACTOR(Optional)
search
inter-rat
limit
threshold[2
SlimitSearchRat dB] BSC6900 ADD UCELLHCS(Optional)
Slot format
SlotFormat1 1 BSC6900 ADD UPRACHSLOTFORMAT(Optional)
Slot format
SlotFormat2 2 BSC6900 ADD UPRACHSLOTFORMAT(Optional)
Slot format
SlotFormat3 3 BSC6900 ADD UPRACHSLOTFORMAT(Optional)
Slot format
SlotFormat4 4 BSC6900 ADD UPRACHSLOTFORMAT(Optional)
Number of
PRACH
slot
SlotFormatNum formats BSC6900 ADD UPRACHSLOTFORMAT(Mandatory)
SS and
LCS page
control
SLPAGECTHD threshold BSC6900 SET FCCPUTHD(Optional)
SS and
LCS page
restore
SLPAGERTHD threshold BSC6900 SET FCCPUTHD(Optional)
Signalling
SLSMASK route mask BSC6900 ADD N7DPC(Optional)
Start
SMONTH month BSC6900 SET TZ(Mandatory)
SMS page
control
SMPAGECTHD threshold BSC6900 SET FCCPUTHD(Optional)
SMS page
restore
SMPAGERTHD threshold BSC6900 SET FCCPUTHD(Optional)
SMS RRC
conn share
CPU
SMRRCCONNCCP control
UTHD threshold BSC6900 SET SHARETHD(Optional)
SMS RRC
conn share
msg
SMRRCCONNCM control
SGTHD threshold BSC6900 SET SHARETHD(Optional)
SMS RRC
conn share
CPU
SMRRCCONNRCP restore
UTHD threshold BSC6900 SET
SWPSHARETHD(Optional)
BRD(Mandatory)
SMS RRC
conn share STR BKP(Mandatory)
msg CMP BRDAREA(Optional)
SMRRCCONNRM restore ULD RSTINFO(Mandatory)
SGTHD threshold BSC6900 SET CLK(Mandatory)
SHARETHD(Optional)
SET MPUBIND(Mandatory)
ADD BRD(Mandatory)
LOD BRD(Optional)
Filter SET FCCPUTHD(Optional)
SYN BRDAREA(Optional)
SMWINDOW window BSC6900 SET FCMSGQTHD(Optional)
CMP TBLDATA(Mandatory)
SET MSPCMD(Mandatory)
SET MSP(Mandatory)
SET BFDPROTOSW(Mandatory)
SN Slot No. BSC6900 STR UNODEBBWRPT(Mandatory)
ADD MTP3LNK(Mandatory)
ADD SAALLNK(Mandatory)
SN Slot No. BSC6900 ADD SCTPLNK(Mandatory)
STR IMATST(Mandatory)
SET E1T1LOP(Mandatory)
SN Slot No. BSC6900 ADD E1T1(Mandatory)
LOP ADJNODE(Mandatory)
STR E1T1TST(Mandatory)
SET OPTLOP(Mandatory)
PING IP(Mandatory)
SN Slot No. BSC6900 TRC
ADD IPADDR(Mandatory)
M3LNK(Mandatory)
SET QUEUEMAP(Mandatory)
SET E1T1(Mandatory)
ADD FRALNK(Mandatory)
ADD TSCROSS(Mandatory)
SN Slot No BSC6900 SET PHBMAP(Mandatory)
ADD IMAGRP(Mandatory)
ADD UNILNK(Mandatory)
ADD IMALNK(Mandatory)
ADD DEVIP(Mandatory)
SN Slot No. BSC6900 ADD
ADD IPRT(Mandatory)
URNCCBCPUID(Mandatory)
SET OPT(Mandatory)
SET COPTLNK(Mandatory)
SET ETHPORT(Mandatory)
ADD
ADD UIURGCONN(Mandatory)
PPPLNK(Mandatory)
SN Slot No. BSC6900 ADD
ADD UIURCOMMSCCP(Mandatory)
MPGRP(Mandatory)
ADD MPLNK(Mandatory)
ADD ETHIP(Mandatory)
BLK IMAGRP(Mandatory)
SN Slot No. BSC6900 BLK
SET IMALNK(Mandatory)
UNCELLDETECTSWITCH(Mandatory)
ADD ATMLOGICPORT(Mandatory)
ADD IPLOGICPORT(Mandatory)
ADD ICMPGUARD(Mandatory)
EXP ALMLOG(Optional)
STR IPCHK(Mandatory)
SN Slot No. BSC6900 STA ALMLOG(Optional)
ADD VLANID(Mandatory)
BLK FRAIMA(Mandatory)
ADD IPPATHBIND(Mandatory)
ADD IPRTBIND(Mandatory)
SN Slot No. BSC6900 ADD ETHMD(Mandatory)
OBJALMSHLD(Optional)
ADD ETHMA(Mandatory)
LOP VCL(Mandatory)
ADD ETHMEP(Mandatory)
Main Board SWP ETHPORT(Mandatory)
PING MAC(Mandatory)
Logic slot ADD ETHREDPORT(Mandatory)
STR ETHOAMLOOPTST(Mandatory)
SN No. BSC6900 SET VCLLOP(Optional)
TRC MAC(Mandatory)
ADD ETHTRK(Mandatory)
ADD ETHTRKLNK(Mandatory)
ADD ETHTRKIP(Mandatory)
SN Slot No. BSC6900 STR ETHMIRRORPORT(Mandatory)
ADD UCBSADDR(Mandatory)
SN Slot No. BSC6900 ADD UNODEB(Mandatory)
Sharing
Network ADD ULASNAMAP(Mandatory)
SNAC Area Code BSC6900 ADD UIMSISNAMAP(Mandatory)
SNAC
Configurati
on
SnaExistInd Indication BSC6900 ADD UIMSISNAMAP(Mandatory)
Send Load
Info to
SndLdInfo2GsmInd GSM Ind BSC6900 SET UINTERRATHONCOV(Optional)
Sync
SP Period BSC6900 SET SNTPCLTPARA(Mandatory)
OSP
code[Whol
SPC e Number] BSC6900 ADD OPC(Optional)
OSP code
SPCBITS bits BSC6900 ADD OPC(Mandatory)
OSP
code[Divid
ed
SPCDNF Number] BSC6900 ADD OPC(Optional)
Algorithm
Switch for
UE speed
SpdEstSwitch estimation BSC6900 ADD UCELLHCSHO(Optional)
Signal
point data ADD OPC(Optional)
SPDF format BSC6900 ADD N7DPC(Optional)
ETHPORT
Speed
SPEED SPEED BSC6900 SET ETHPORT(Optional)
dependent
scaling
factor for
SpeedDependentS reselection
calingFactor delay BSC6900 ADD UCELLSELRESEL(Optional)
Service
priority
group
SpgId Identity BSC6900 ADD USPG(Mandatory)
Service
priority
group ADD UCELLSETUP(Mandatory)
SpgId identity BSC6900 ADD UCELLQUICKSETUP(Mandatory)
Scheduling
Priority
SPI Indicator BSC6900 SET USCHEDULEPRIOMAP(Mandatory)
Scheduling
Priority
SPI Indicator BSC6900 SET USPIFACTOR(Mandatory)
Src Port
SPORTNO NO. BSC6900 STR IPLOPTST(Mandatory)
Support
State
SPTSTATEFWL Firewall BSC6900 SET FTPSCLT(Optional)
Load level
division
SpucHeavy threshold 1 BSC6900 ADD UCELLPUC(Optional)
Load level
division
SpucHyst hysteresis BSC6900 ADD UCELLPUC(Optional)
Load level
division
SpucLight threshold 2 BSC6900 ADD UCELLPUC(Optional)
ADD OPC(Mandatory)
ADD N7DPC(Mandatory)
SPX OSP index BSC6900 ADD M3LE(Mandatory)
SRB
channel
SrbChlType type BSC6900 SET UFRCCHLTYPEPARA(Optional)
SRB
channel
SrbChlTypeRrcEffe type RRC
ctFlag effect flag BSC6900 SET UFRCCHLTYPEPARA(Optional)
UMTS
SRB
service
downlink
SRBDL factor BSC6900 ADD TRMFACTOR(Optional)
SRB MAC-
SRBGBR c flow GBR BSC6900 ADD UCELLEFACH(Optional)
SRB MAC-
SRBMBR c flow MBR BSC6900 ADD UCELLEFACH(Optional)
SRB
primary
SRBPRIPATH path BSC6900 ADD TRMMAP(Optional)
Signal pri
path load
SRBPRITH threshold BSC6900 ADD LOADEQ(Optional)
SRB
secondary
SRBSECPATH path BSC6900 ADD TRMMAP(Optional)
Signal pri
sec path
load ratio
SRBSECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS
SRB
service
uplink
SRBUL factor BSC6900 ADD TRMFACTOR(Optional)
Source File
SRCF Name BSC6900 RUN BATCHFILE(Mandatory)
Clock
source
SRCGRD priority BSC6900 ADD CLKSRC(Mandatory)
Clock
source
SRCGRD priority BSC6900 SET CLKMODE(Mandatory)
PING MAC(Mandatory)
SRCMEPID MEP ID BSC6900 TRC MAC(Mandatory)
Source
SRCPORTNO port No. BSC6900 ADD TSCROSS(Mandatory)
Clock
source
SRCT type BSC6900 ADD CLKSRC(Mandatory)
BLK IMAGRP(Mandatory)
BLK IMALNK(Mandatory)
ADD ATMLOGICPORT(Mandatory)
ADD IPLOGICPORT(Mandatory)
ADD ICMPGUARD(Mandatory)
STR IPCHK(Mandatory)
ADD VLANID(Mandatory)
BLK FRAIMA(Mandatory)
Source STR IPLOPTST(Mandatory)
timeslot ADD IPPATHBIND(Mandatory)
SRCTSMASK mask BSC6900 ADD IPRTBIND(Mandatory)
TSCROSS(Mandatory)
ADD ETHMA(Mandatory)
ADD ETHMEP(Mandatory)
Timer_RE
PING MAC(Mandatory)
PEAT-
STR ETHOAMLOOPTST(Mandatory)
SRECTMR SREC BSC6900 ADD SAALLNK(Optional)
TRC MAC(Mandatory)
SET BFDPROTOSW(Mandatory)
SET VCLLOP(Mandatory)
Subrack SET TRANSPATCHPARA(Mandatory)
SRN No. BSC6900 STR UNODEBBWRPT(Mandatory)
Subrack
SRN No. BSC6900 ADD M3LNK(Mandatory)
Subrack
SRN No. BSC6900 SET UNCELLDETECTSWITCH(Mandatory)
Subrack
SRN No. BSC6900 COL LOG(Optional)
EXP ALMLOG(Optional)
Subrack STA ALMLOG(Optional)
SRN No. BSC6900 ADD OBJALMSHLD(Mandatory)
ADD ETHMD(Mandatory)
ADD ETHTRK(Mandatory)
ADD ETHTRKLNK(Mandatory)
Subrack ADD ETHTRKIP(Mandatory)
SRN No. BSC6900 STR ETHMIRRORPORT(Mandatory)
Subrack ADD UCBSADDR(Mandatory)
SRN No. BSC6900 ADD UNODEB(Mandatory)
Subrack
SRName name BSC6900 ADD SUBRACK(Mandatory)
Srnc
Parameter
for BE
SrncBeDlRlcQosS Downlink
witch RLC QOS BSC6900 SET UQOSACT(Optional)
SRNS
relocation-
SrnsRabCnDomain allowed
Type traffic type BSC6900 SET USRNSR(Optional)
Estimated
non-
measurem
ent delay
SRNSRDelayOffset offset[ms] BSC6900 SET USRNSR(Optional)
SRNS
relocation
expiry
SRNSRExpiryTime time[s] BSC6900 SET USRNSR(Optional)
SRNSR Iur
SRNSRIurReselect reselection
TimerLen timer[s] BSC6900 SET USRNSR(Optional)
Duration of
triggering
static
SrnsrSeparateDura relocation[s
tion ] BSC6900 SET USRNSR(Optional)
SRNSR
algorithm
SrnsrSwitch switch BSC6900 SET UCORRMALGOSWITCH(Optional)
Relocation
trigger
timer after
SRNSRTrigTimer IurCCH[s] BSC6900 SET USRNSR(Optional)
Subrack
SRT type BSC6900 SET CLK(Mandatory)
Source
Ssd description BSC6900 ADD UTYPRABBASIC(Mandatory)
DSP
occupancy
alarm
SSDSPAVEUSAG clearance
EALMTHD threshold BSC6900 SET CPUTHD(Optional)
DSP
occupancy
SSDSPMAXUSAG alarm
EALMTHD threshold BSC6900 SET CPUTHD(Optional)
HCS cell
reselection
threshold[2
SsearchHCS dB] BSC6900 ADD UCELLHCS(Optional)
Inter-RAT
cell
reselection
threshold[2
SsearchRat dB] BSC6900 ADD UCELLSELRESEL(Optional)
STR BKP(Optional)
ULD RSTINFO(Mandatory)
LOD BRD(Optional)
Subsystem ADD URNCCBCPUID(Mandatory)
SSN No. BSC6900 CMP TBLDATA(Mandatory)
Subsystem
SSN No. BSC6900 ADD UIURGCONN(Mandatory)
Subsystem
SSN No. BSC6900 ADD UNODEB(Optional)
Start Sync
SSSN Serial No. BSC6900 EXP ALMLOG(Optional)
ST StartTime BSC6900 SET TZ(Mandatory)
Service
ST type BSC6900 ADD ATMTRF(Mandatory)
Statistic
Block
Number
For 5A
StaBlkNum5A Event BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
CN
protection
StateIndTmr timer[ms] BSC6900 SET UIUTIMERANDNUM(Optional)
Sccp state
ind
protection
StateIndTMR timer[s] BSC6900 ADD UNRNC(Optional)
STP
function
STP switch BSC6900 ADD N7DPC(Optional)
Downlink
MBR of
Streaming[
StreamDlMBR kbit/s] BSC6900 SET UUSERMBR(Optional)
Rate
Streaming
threshold
MAC-c flow
of
STREAMGBR GBR BSC6900 ADD UCELLEFACH(Optional)
Streaming
on 2ms TTI
of
StreamHsupa2msT HSUPA[kbi
tiRateThs t/s] BSC6900 SET UFRC(Optional)
Streaming
MAC-c flow
STREAMMBR MBR BSC6900 ADD UCELLEFACH(Optional)
Uplink
MBR of
Streaming[
StreamUlMBR kbit/s] BSC6900 SET UUSERMBR(Optional)
STTD
support
STTDSupInd indicator BSC6900 ADD UEXT3GCELL(Optional)
STTD
support
STTDSupInd indicator BSC6900 ADD UCELLSETUP(Mandatory)
Service
subflow ADD UTYPRABOLPC(Mandatory)
SubflowIndex index BSC6900 ADD UTYPRABRLC(Mandatory)
Max
subframe
length[byte
SUBFRAMELEN ] BSC6900 ADD IPMUX(Optional)
ADD SUBTSK(Mandatory)
SUBID Subtask ID BSC6900 ADD SUBCMD(Mandatory)
CBS
SupBmc support BSC6900 ADD UCELLQUICKSETUP(Optional)
Support
downlink
DPCH SF
SuppDlSf512 512 BSC6900 ADD UNODEBLMTPARA(Optional)
Support
SuppDpcmodeChg DPC mode
Flag Change ind BSC6900 ADD UEXT3GCELL(Optional)
Support
DPC mode
SuppDpcTriplet TRIPLET BSC6900 ADD UNODEBLMTPARA(Optional)
IUR CCH
support
SuppIurCch flag BSC6900 ADD UNRNC(Optional)
Use Back-
SUPPORTBAKCLK up port for
SRC LINE1 BSC6900 SET CLK(Optional)
CR support
SupportCRType type BSC6900 ADD UCNNODE(Optional)
Inter-RAT
cell support
PS HO
SuppPSHOFlag indicator BSC6900 ADD UEXT2GCELL(Optional)
Support PS
realtime
SuppPsRtServOnH traffic on
sdpa HSDPA BSC6900 ADD UNODEBLMTPARA(Optional)
Inter-RAT
cell support
RIM
SuppRIMFlag indicator BSC6900 ADD UEXT2GCELL(Optional)
Self-
healing
SWITCH Switch BSC6900 SET SLFSLVSW(Mandatory)
Grace
Protection
Period
SWITCH Switch BSC6900 SET LICENSECTRL(Mandatory)
Bfd
Protocol
SWITCH Switch BSC6900 SET BFDPROTOSW(Mandatory)
Switch3GP
Switch3GPP25415 P25415CR
CR0125 0125 BSC6900 ADD UCNNODE(Optional)
Switch
primary IP
SWITCHBACKFLA address
G flag BSC6900 ADD SCTPLNK(Optional)
Switch
SWITCHBACKHBN back HB
UM number BSC6900 ADD SCTPLNK(Optional)
SwitchPara
SwitchParameter1 meter1 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter10 meter10 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter2 meter2 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter3 meter3 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter4 meter4 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter5 meter5 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter6 meter6 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter7 meter7 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter8 meter8 BSC6900 SET SS7PATCHSWITCH(Optional)
SwitchPara
SwitchParameter9 meter9 BSC6900 SET SS7PATCHSWITCH(Optional)
Set
Enable/Dis
SWOP able BSC6900 SET OPSW(Mandatory)
Start week
SWSEQ sequence BSC6900 SET TZ(Mandatory)
Synchroniz
SYNFLAG ation flag. BSC6900 CMP BRDAREA(Optional)
AMR_RRC
Number
per Second
SysAmrRrcNum for System BSC6900 SET UCALLSHOCKCTRL(Optional)
Contact
mode of
the
manufactur
SYSCONTACT er BSC6900 SET SYS(Optional)
System
SYSDESC description BSC6900 SET SYS(Optional)
HiPri_RRC
Number
per Second
SysHighPriRrcNum for System BSC6900 SET UCALLSHOCKCTRL(Optional)
PS resume
timer after
SysHoPsResumeT SYSHO[mi
mr n] BSC6900 SET USTATETIMER(Optional)
System
SYSLOCATION Location BSC6900 SET SYS(Optional)
Signalling
route set
T10TMR test timer BSC6900 SET MTP3TMR(Optional)
Uninhibit
T12TMR ACK timer BSC6900 SET MTP3TMR(Optional)
Force
uninhibit
T13TMR timer BSC6900 SET MTP3TMR(Optional)
Inhibition
T14TMR ACK timer BSC6900 SET MTP3TMR(Optional)
Link
realignmen
T17TMR t timer BSC6900 SET MTP3TMR(Optional)
Time-
control
changeove
T1TMR r timer BSC6900 SET MTP3TMR(Optional)
Local
inhibit test
T22TMR timer BSC6900 SET MTP3TMR(Optional)
Remote
inhibit test
T23TMR timer BSC6900 SET MTP3TMR(Optional)
Changeove
r ACK
T2TMR timer BSC6900 SET MTP3TMR(Optional)
Timer
T300 300[ms] BSC6900 SET UIDLEMODETIMER(Optional)
Timer
T302 302[ms] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T304 304[ms] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T305 305[min] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T307 307[s] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T308 308[ms] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T309 309[s] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T313 313[s] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T314 314[s] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T315 315[s] BSC6900 SET UCONNMODETIMER(Optional)
Timer
T316 316[s] BSC6900 SET UCONNMODETIMER(Optional)
Periodical
location
update
T3212 timer[6min] BSC6900 ADD UCNDOMAIN(Optional)
Timer
T381 381[ms] BSC6900 SET UCONNMODETIMER(Optional)
Time-
control
changebac
T3TMR k timer BSC6900 SET MTP3TMR(Optional)
Changeove
r ACK first
attempt
T4TMR timer BSC6900 SET MTP3TMR(Optional)
Changeove
r ACK
second
attempt
T5TMR timer BSC6900 SET MTP3TMR(Optional)
Transmissi
on
prohibited
inhibition
T8TMR timer BSC6900 SET MTP3TMR(Optional)
Target
RLC
Retransmis
sion
Inter-freq
TagetRlcRetrans rate[0.1%] BSC6900 SET URACHMEASUREPARA(Optional)
CS target
frequency
trigger
TargetFreqCsThdE Ec/No SET UINTERFREQHOCOV(Optional)
Inter-freq
cN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
CS target
frequency
trigger
TargetFreqCsThdR RSCP SET UINTERFREQHOCOV(Optional)
Inter-freq H
scp THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
target
frequency
trigger
TargetFreqHThdEc Ec/No SET UINTERFREQHOCOV(Optional)
Inter-freq H
N0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
target
frequency
trigger
Inter-freq
TargetFreqHThdRs RSCP SET UINTERFREQHOCOV(Optional)
R99 PS
cp THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
target
frequency
trigger
Inter-freq
TargetFreqR99PsT Ec/No SET UINTERFREQHOCOV(Optional)
R99 PS
hdEcN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
target
frequency
trigger
TargetFreqR99PsT RSCP SET UINTERFREQHOCOV(Optional)
hdRscp THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Inter-RAT
CS
handover
decision SET UINTERRATHOCOV(Optional)
TargetRatCsThd THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
H
handover
decision SET UINTERRATHOCOV(Optional)
TargetRatHThd THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-RAT
R99 PS
handover
TargetRatR99PsTh decision SET UINTERRATHOCOV(Optional)
d THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Output
Segment
TB No. BSC6900 EXP DEVFILE(Optional)
Configured
TBS Count
for HS-
SCCH
TbIndexNum Less Mode BSC6900 SET UHSSCCHLESSOPPARA(Optional)
TB number
TbNumber1 of TF1 BSC6900 ADD UFACHDYNTFS(Optional)
TB number
TbNumber1 of TF1 BSC6900 ADD UPCHDYNTFS(Optional)
TB number
TbNumber1 of TF1 BSC6900 ADD URACHDYNTFS(Optional)
TB number
TbNumber2 of TF2 BSC6900 ADD UFACHDYNTFS(Optional)
TB number
TbNumber2 of TF2 BSC6900 ADD UPCHDYNTFS(Optional)
TB number
TbNumber2 of TF2 BSC6900 ADD URACHDYNTFS(Optional)
TB number
TbNumber3 of TF3 BSC6900 ADD UFACHDYNTFS(Optional)
TB Size
TbSizeIndex1 Index 1 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
TB Size
TbSizeIndex2 Index 2 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
TB Size
TbSizeIndex3 Index 3 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
TB Size
TbSizeIndex4 Index 4 BSC6900 SET UHSSCCHLESSOPPARA(Optional)
Target cell
TCellId ID BSC6900 HO UCELL(Optional)
Test code
TCLEN length BSC6900 ADD MTP3LNK(Optional)
Time for
evaluating
max cell
Time
TCRmax reselection BSC6900 ADD UCELLHCS(Optional)
before
revert to
low-
mobility
TCrmaxHyst meas BSC6900 ADD UCELLHCS(Optional)
Non-HCS
TCR max
Tcrmaxhystnonhcs hysteresis BSC6900 ADD UCELLSELRESEL(Optional)
Non-HCS
Tcrmaxnonhcs max TCR BSC6900 ADD UCELLSELRESEL(Optional)
Period of
UE slow
speed SET UHCSHO(Optional)
TCycleSlow decision[s] BSC6900 ADD UCELLHCSHO(Optional)
Enable
Temperatu
re Alarm
TEMP_MASK Reporting BSC6900 ADD EMU(Optional)
Upper Limit
of
Temperatu
TEMP_THD_HIGH re Alarm BSC6900 ADD EMU(Optional)
Lower Limit
of
Temperatu
TEMP_THD_LOW re Alarm BSC6900 ADD EMU(Optional)
HCS Cell
Reselect ADD UINTRAFREQNCELL(Optional)
TempOffse ADD UINTERFREQNCELL(Optional)
TempOffset1 t1[dB] BSC6900 ADD U2GNCELL(Optional)
HCS Cell
Reselect
TempOffse ADD UINTRAFREQNCELL(Optional)
TempOffset2 t2[dB] BSC6900 ADD UINTERFREQNCELL(Optional)
AMR Event
E
Reporting ADD UCELLQUALITYMEAS(Optional)
TenMsecForAmrE Period[ms] BSC6900 SET UQUALITYMEAS(Optional)
BE Event E
Reporting ADD UCELLQUALITYMEAS(Optional)
TenMsecForBeE Period[ms] BSC6900 SET UQUALITYMEAS(Optional)
BE Event F
Reporting ADD UCELLQUALITYMEAS(Optional)
TenMsecForBeF Period[ms] BSC6900 SET UQUALITYMEAS(Optional)
DL basic
TenMsecForDlBasi meas rprt SET ULDM(Mandatory)
cMeas cycle BSC6900 SET USATLDM(Mandatory)
DL OLC
meas rprt
TenMsecForDlOlc cycle[10ms
Meas ] BSC6900 SET ULDM(Mandatory)
DL OLC
TenMsecForDlOlc meas rprt
Meas cycle BSC6900 SET USATLDM(Mandatory)
HSDPA bit
rate meas
TenMsecForHsdpa cycle[10ms SET ULDM(Mandatory)
PrvidRateMeas ] BSC6900 SET USATLDM(Mandatory)
HSDPA
need pwr
meas
TenMsecForHsdpa cycle[10ms SET ULDM(Mandatory)
PwrMeas ] BSC6900 SET USATLDM(Mandatory)
HSUPA bit
rate meas
TenMsecForHsupa cycle[10ms
PrvidRateMeas ] BSC6900 SET ULDM(Mandatory)
UL basic
TenMsecForUlBasi meas rprt SET ULDM(Mandatory)
cMeas cycle BSC6900 SET USATLDM(Mandatory)
UL OLC
TenMsecForUlOlc meas rprt SET ULDM(Mandatory)
Meas cycle BSC6900 SET USATLDM(Mandatory)
VP Event E
Reporting ADD UCELLQUALITYMEAS(Optional)
TenMsecForVpE Period[ms] BSC6900 SET UQUALITYMEAS(Optional)
Time
window for
UE fast
speed SET UHCSHO(Optional)
TFastSpdEst decision[s] BSC6900 ADD UCELLHCSHO(Optional)
TFCI
existing
TFCIpresence indicator BSC6900 ADD USCCPCHBASIC(Mandatory)
Number of
TFsNumber TFs BSC6900 ADD UFACHDYNTFS(Mandatory)
Target
TG OMU BSC6900 SWP OMUAREA(Mandatory)
TGW
IP_TRANS
TGWIPOAMMASK IP Mask BSC6900 ADD TGWIP(Mandatory)
TGW
TRANS
TGWPEERSN Slot No. BSC6900 ADD TGWIP(Mandatory)
TGW
Trans
Subrack
TGWPEERSRN No. BSC6900 ADD TGWIP(Mandatory)
Event 5A
Thd5A Threshold BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Event Ea
Relative
Threshold[
ThdEa 0.5dB] BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Event Eb
Relative
Threshold[
ThdEb 0.5dB] BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Traffic
Handling
THP Priority BSC6900 SET USCHEDULEPRIOMAP(Mandatory)
User Class
of Traffic
Handler
THP10Class Priority 10 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP11Class Priority 11 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP12Class Priority 12 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP13Class Priority 13 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP14Class Priority 14 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP15Class Priority 15 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP1Class Priority 1 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP2Class Priority 2 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP3Class Priority 3 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP4Class Priority 4 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP5Class Priority 5 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP6Class Priority 6 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP7Class Priority 7 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP8Class Priority 8 BSC6900 SET UIAVUSERTHPCLASS(Optional)
User Class
of Traffic
Handler
THP9Class Priority 9 BSC6900 SET UIAVUSERTHPCLASS(Optional)
Traffic
Handler
Priority
THPClass Class BSC6900 SET UUSERGBR(Mandatory)
Threshold
THTYPE type BSC6900 ADD TRMLOADTH(Mandatory)
Reply
Time-
TIMEOUT Out[ms] BSC6900 PING IP(Optional)
Reply
Time-
TIMEOUT Out[ms] BSC6900 TRC IPADDR(Optional)
Block
Timer time[s] BSC6900 BLK UCELL(Mandatory)
Timer_CU
TIMERCU timer BSC6900 ADD AAL2PATH(Optional)
Number of
ping
TIMES packets BSC6900 PING IP(Optional)
Inter-freq
coverage
handover
delay trig SET UINTERFREQHOCOV(Optional)
TimeToInterfreqHO time BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Time to
start re-TX
monitor[ms
TimeToMoniter ] BSC6900 ADD UTYPRABRLC(Optional)
2B event
trigger
delay SET UINTERFREQHOCOV(Optional)
TimeToTrig2B time[ms] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
2D event
trigger
delay SET UINTERFREQHOCOV(Optional)
TimeToTrig2D time[ms] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
2F event
trigger
delay SET UINTERFREQHOCOV(Optional)
Time to
TimeToTrig2F time[ms] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
trigger for
non-
verified SET UINTERRATHOCOV(Optional)
TimeToTrigForNon GSM ADD UCELLINTERRATHOCOV(Optional)
Verify cell[ms] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
HHO
period
trigger SET UINTERFREQHOCOV(Optional)
TimeToTrigForPrdI delay ADD UCELLINTERFREQHOCOV(Optional)
nterFreq time[ms] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
Time to
trigger for
verified SET UINTERRATHOCOV(Optional)
TimeToTrigForVerif GSM ADD UCELLINTERRATHOCOV(Optional)
y cell[ms] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Time to
trigger
TimetoTrigger4A 4A[ms] BSC6900 ADD UTYPRABDCCCMC(Optional)
Time to
trigger
TimetoTrigger4B 4B[ms] BSC6900 ADD UTYPRABDCCCMC(Optional)
Event A
time to
TimeToTriggerA trigger BSC6900 ADD UTYPRABRLC(Optional)
Event B
time to
TimeToTriggerB trigger BSC6900 ADD UTYPRABRLC(Optional)
Execute
TM Time BSC6900 ADD SUBTSK(Mandatory)
Execute
TM1 Time 1 BSC6900 ADD SUBTSK(Mandatory)
Execute
TM2 Time 2 BSC6900 ADD SUBTSK(Optional)
Execute
TM3 Time 3 BSC6900 ADD SUBTSK(Optional)
Execute
TM4 Time 4 BSC6900 ADD SUBTSK(Optional)
Execute
TM5 Time 5 BSC6900 ADD SUBTSK(Optional)
TRMMAP
TMI ID BSC6900 ADD TRMMAP(Mandatory)
Bronze
user
TRMMAP
TMIBRZ index BSC6900 ADD ADJMAP(Mandatory)
Gold user
TRMMAP
TMIGLD index BSC6900 ADD ADJMAP(Mandatory)
Silver user
TRMMAP
TMISLV index BSC6900 ADD ADJMAP(Mandatory)
Upper time
threshold
of raised
TMRISTHRD fault BSC6900 SET ALMBLKPARA(Optional)
Lower time
threshold
of raised
TMSTLTHRD fault BSC6900 SET ALMBLKPARA(Optional)
Signalling
link test
TMT1TMR ACK timer BSC6900 SET MTP3TMR(Optional)
Signalling
link repeat
TMT2TMR test timer BSC6900 SET MTP3TMR(Optional)
IUR trans
TnlBearerType bearer type BSC6900 ADD UNRNC(Mandatory)
Iu transfers
TnlBearerType bearer type BSC6900 ADD UCNNODE(Optional)
IUB trans
TnlBearerType bearer type BSC6900 ADD UNODEB(Optional)
AdjustMeth
TO od BSC6900 SET TZ(Mandatory)
Time of
arrival
window
endpoint[m ADD UCELLMBMSFACH(Optional)
ToAWE s] BSC6900 ADD UPCH(Optional)
Time of
arrival
window
endpoint[m ADD UFACH(Mandatory)
ToAWE s] BSC6900 SET UMBMSFACH(Optional)
Time of
arrival
window
startpoint[ ADD UCELLMBMSFACH(Optional)
ToAWS ms] BSC6900 ADD UPCH(Optional)
Time of
arrival
window
startpoint[ ADD UFACH(Mandatory)
Cell
ToAWS ms] BSC6900 SET UMBMSFACH(Optional)
Dynamic
ShutDown
Total User
number
TotalUserNumThd Threshold BSC6900 ADD UCELLDYNSHUTDOWN(Optional)
Traffic
TrafficClass Class BSC6900 ADD UTYPRABBASIC(Mandatory)
Traffic
TrafficClass Class BSC6900 SET USCHEDULEPRIOMAP(Mandatory)
Traffic
TrafficClass Class BSC6900 SET UUSERGBR(Mandatory)
Traffic
TrafficClass class BSC6900 SET UDTXDRXPARA(Mandatory)
Traffic
TrafficClass class BSC6900 SET UFACHBANDWIDTH(Mandatory)
Traffic
TrafficClass class BSC6900 SET UHSSCCHLESSOPPARA(Mandatory)
Traffic
TrafficClass class BSC6900 SET UUSERHAPPYBR(Mandatory)
Traffic
TrafficType Type BSC6900 ADD UCELLREDIRECTION(Mandatory)
Traffic
TrafficType Type BSC6900 SET UREDIRECTION(Mandatory)
Traffic
TRAMODE mode BSC6900 ADD M3LKS(Optional)
Transfer
Common
Channel
User
TransCchUserNum number BSC6900 ADD UCELLOLC(Optional)
IUB Trans
TRANSDELAY Delay[ms] BSC6900 ADD UNODEB(Optional)
Transport
TRANST Type BSC6900 ADD ADJNODE(Mandatory)
Transport
Transport
TRANST Type BSC6900 ADD IPPATH(Mandatory)
Type of the
adjacent
node and
interface
TRANST type BSC6900 ADD ADJMAP(Mandatory)
Transport
TRANST Type BSC6900 ADD TRMMAP(Optional)
Transport
TRANST Type BSC6900 ADD TRMLOADTH(Mandatory)
ADD UPCH(Optional)
TrChId PCH ID BSC6900 ADD UPCHDYNTFS(Optional)
ADD URACH(Optional)
TrChId RACH ID BSC6900 ADD URACHDYNTFS(Optional)
Transport
channel
TrchType type BSC6900 ADD UTYPRABHSPA(Mandatory)
Transport
channel
TrchType type BSC6900 ADD UTYPRABOLPC(Mandatory)
Transport
channel
TrchType type BSC6900 ADD UTYPRABRLC(Mandatory)
Related
length for
1D SET UHCSHO(Optional)
TRelateLength records[s] BSC6900 ADD UCELLHCSHO(Optional)
Reselectio
Reselectio
n delay
n delay
Treselections time BSC6900 ADD UCELLSELRESEL(Optional)
time for UE
in
CELL_FAC
H
Treselectionsfach state[0.2s] BSC6900 ADD UCELLSELRESEL(Optional)
Reselectio
n delay
time for UE
in PCH
Treselectionspch state BSC6900 ADD UCELLSELRESEL(Optional)
Traffic
TRFX index BSC6900 ADD ATMTRF(Mandatory)
1A Event
Trigger
Delay
TrigTime1A Time[ms] BSC6900 SET USMLC(Mandatory)
1A event
trigger
delay SET UINTRAFREQHO(Optional)
TrigTime1A time[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1B Event
Trigger
Delay
TrigTime1B Time[ms] BSC6900 SET USMLC(Mandatory)
1B event
trigger
delay SET UINTRAFREQHO(Optional)
TrigTime1B time[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1C event
trigger
delay SET UINTRAFREQHO(Optional)
TrigTime1C time[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1D event
trigger
delay SET UINTRAFREQHO(Optional)
TrigTime1D time[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1F event
trigger
delay SET UINTRAFREQHO(Optional)
TrigTime1F time[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
1J event
trigger
delay SET UINTRAFREQHO(Optional)
TrigTime1J time[ms] BSC6900 ADD UCELLINTRAFREQHO(Optional)
2C event SET UINTERFREQHONCOV(Optional)
trigger ADD
delay UCELLINTERFREQHONCOV(Optional)
TrigTime2C time[ms] BSC6900 ADD UCELLMBDRINTERFREQ(Optional)
2D event
trigger
delay SET UINTERRATHOCOV(Optional)
TrigTime2D time[ms] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
2F event
trigger
delay SET UINTERRATHOCOV(Optional)
TrigTime2F time[ms] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3A event
trigger
delay SET UINTERRATHOCOV(Optional)
TrigTime3A time[ms] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3C event
trigger SET UINTERRATHONCOV(Optional)
delay ADD UCELLINTERRATHONCOV(Optional)
TrigTime3C time[ms] BSC6900 ADD UCELLMBDRINTERRAT(Optional)
6F event
trigger
delay
TrigTime6F time[ms] BSC6900 SET UHOCOMM(Optional)
6G event
trigger
delay
TrigTime6G time[ms] BSC6900 SET UHOCOMM(Optional)
Trunk Link
TRKLNKPN No. BSC6900 ADD ETHTRKLNK(Mandatory)
Trunk Link
TRKLNKSN Slot No. BSC6900 ADD ETHTRKLNK(Mandatory)
ADD ETHTRK(Mandatory)
ADD ETHTRKLNK(Mandatory)
TRKN Trunk No. BSC6900 ADD ETHTRKIP(Mandatory)
Radio link
failure
timer
length[0.1s
TRlFailure ] BSC6900 ADD UCELLSETUP(Optional)
TRM load
TRMLOADTHINDE threshold ADD AAL2PATH(Optional)
X index BSC6900 ADD RSCGRP(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD IPPATH(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD TRMLOADTH(Mandatory)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD FRALNK(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD IMAGRP(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD UNILNK(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD PPPLNK(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD MPGRP(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD ATMLOGICPORT(Optional)
TRM load
TRMLOADTHINDE threshold
X index BSC6900 ADD IPLOGICPORT(Optional)
RNC ID of
TRncId Target Cell BSC6900 HO UCELL(Optional)
The Trunk
TRUNKN group No. BSC6900 ADD IPLOGICPORT(Optional)
Trunk
TRUNKN group No. BSC6900 STR IPCHK(Optional)
16TimeSlot
TS16ENABLE switch BSC6900 SET E1T1(Optional)
Bearing
TSBITMAP time slot BSC6900 ADD FRALNK(Mandatory)
Bearing
TSBITMAP time slot BSC6900 ADD PPPLNK(Mandatory)
Bearing
TSBITMAP time slot BSC6900 ADD MPLNK(Mandatory)
Time slot
TSCROSSX cross index BSC6900 ADD TSCROSS(Optional)
ADD SCHTSK(Mandatory)
SET SCHTSKSW(Optional)
ADD SUBTSK(Optional)
ADD SUBCMD(Optional)
TSKN Task Name BSC6900 STR SCHTSK(Optional)
Time
window for
UE slow
speed SET UHCSHO(Optional)
TSlowSpdEst decision[s] BSC6900 ADD UCELLHCSHO(Optional)
MGWTST
TstImsi USER IMSI BSC6900 SET UMGWTST(Mandatory)
MGWTST
TstSwitch SWITCH BSC6900 SET UMGWTST(Mandatory)
Time to
TTL Live BSC6900 PING IP(Optional)
Forward
TXBW Bandwidth BSC6900 ADD IPPATH(Mandatory)
Forward
TxBw Bandwidth BSC6900 ADD RSCGRP(Mandatory)
Forward
bandwidth
TXBW [kbps] BSC6900 ADD ATMLOGICPORT(Mandatory)
TX
diversity
TxDiversityInd indication BSC6900 ADD UEXT3GCELL(Mandatory)
TX
diversity
TxDiversityInd indication BSC6900 ADD UCELLSETUP(Mandatory)
Interval of
TXINT send[ms] BSC6900 PING IP(Optional)
Interval of
Packet
TXINT Send [ms] BSC6900 STR IPLOPTST(Optional)
TX traffic
record
TXTRFX index BSC6900 ADD SAALLNK(Mandatory)
TX traffic
record
TXTRFX index BSC6900 ADD AAL2PATH(Mandatory)
TX traffic
record
TXTRFX index BSC6900 ADD IPOAPVC(Optional)
TX traffic
record
TXTRFX index BSC6900 ADD VPCLCX(Mandatory)
Finish
TYPE Type BSC6900 RUN BATCHFILE(Mandatory)
Application
TYPE Type BSC6900 SET CTRLFACTOR(Mandatory)
Downlink
UARFCNDownlink UARFCN BSC6900 ADD UEXT3GCELL(Optional)
UL
frequency
UARFCNUplinkInd ind BSC6900 ADD UEXT3GCELL(Optional)
UL
frequency
UARFCNUplinkInd ind BSC6900 ADD UCELLSETUP(Optional)
Unblocking
request
UBLREQTMR timer BSC6900 SET AAL2TMR(Optional)
Receive
UDPMUXMODREC UDP MUX
V Mode BSC6900 ADD IPMUX(Mandatory)
Sender
UDPMUXMODSEN UDP MUX
D Mode BSC6900 ADD IPMUX(Mandatory)
UE-
assisted A-
GPS Data
UeAssAgpsAssDat Send
aSwitch switch BSC6900 SET USMLC(Optional)
UE-based
A-GPS
UeBasAgpsAssDat Data Send
aSwitch Switch BSC6900 SET USMLC(Optional)
UE
capability
enquiry
response
UeCapEnqRspTmr timer[ms] BSC6900 SET USTATETIMER(Optional)
UE counter
check
UeCntCheckRspT response
mr timer[ms] BSC6900 SET USTATETIMER(Optional)
Operator
UG Level BSC6900 ADD OP(Optional)
Unit
UINTTIME time[ms] BSC6900 STR E1T1TST(Optional)
BE Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlBeTrigTime6A1 6A1[ms] BSC6900 SET UQUALITYMEAS(Optional)
BE Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlBeTrigTime6A2 6A2[ms] BSC6900 SET UQUALITYMEAS(Optional)
BE Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlBeTrigTime6B1 6B1[ms] BSC6900 SET UQUALITYMEAS(Optional)
BE Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlBeTrigTime6B2 6B2[ms] BSC6900 SET UQUALITYMEAS(Optional)
BE Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlBeTrigTime6D 6D[ms] BSC6900 SET UQUALITYMEAS(Optional)
UL CAC
smoothing SET ULDM(Optional)
UL
UlCacAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
common
channel
load
reserved
UlCCHLoadFactor coefficient BSC6900 ADD UCELLCAC(Optional)
UL total
power
UlCellTotalThd threshold BSC6900 ADD UCELLCAC(Optional)
Uplink
Compressi
UlCmMethod on Method BSC6900 ADD UNODEBLMTPARA(Optional)
UL CS
should be
UlCSInterRatShoul HO user
dBeHOUeNum number BSC6900 ADD UCELLLDR(Optional)
UL CS
should be
UlCSInterRatShoul ho user
dBeHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
UL CS
should not
UlCSInterRatShoul be HO user
dNotHOUeNum number BSC6900 ADD UCELLLDR(Optional)
UL CS
should not
UlCSInterRatShoul be ho user
Uplink Bit
dNotHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
Rate
Threshold
For
DCCC[kbit/
UlDcccRateThd s] BSC6900 SET UDCCC(Optional)
UL FP
UlFpMode Mode BSC6900 ADD UTYPRABBASIC(Mandatory)
Uplink Full
Coverage
Bit ADD UCELLDCCC(Optional)
UlFullCvrRate Rate[kbit/s] BSC6900 SET UDCCC(Optional)
Uplink
GBR for
BE
service[kbit
UlGBR /s] BSC6900 SET UUSERGBR(Optional)
UL
handover
credit
reserved
UlHoCeResvSf SF BSC6900 ADD UCELLCAC(Optional)
UL HS-
DPCCH
UlHsDpcchRsvdFa reserve
ctor factor BSC6900 ADD UCELLCAC(Optional)
IMS
signalling
transmissio
UlIMSTransModeO n mode on
nHsupa HSUPA BSC6900 SET UFRC(Optional)
UL AF of
R99
interactive
UlInteractAF service BSC6900 SET UADMCTRL(Optional)
UL HO
UlInterFreqHoBWT maximum
hd bandwidth BSC6900 ADD UCELLLDR(Optional)
UL HO
UlInterFreqHoCellL load space
oadSpaceThd threshold BSC6900 ADD UCELLLDR(Optional)
UL LDR-
AMR rate
reduction
UlLdrAMRRateRed RAB
uctionRabNum number BSC6900 ADD UCELLLDR(Optional)
UL LDR
smoothing SET ULDM(Optional)
UlLdrAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
UL LDR-
BE rate
reduction
UlLdrBERateReduc RAB
tionRabNum number BSC6900 ADD UCELLLDR(Optional)
UL LDR-
BE rate
reduction
UlLdrBERateReduc RAB
tionRabNum number BSC6900 ADD UNODEBLDR(Optional)
Ul LDR
credit SF
UlLdrCreditSfResT reserved
hd threshold BSC6900 ADD UCELLLDR(Optional)
Ul LDR
Credit SF
UlLdrCreditSfResT reserved
hd threshold BSC6900 ADD UNODEBLDR(Optional)
UL LDR
eighth
UlLdrEighthAction action BSC6900 ADD UCELLLDR(Optional)
UL LDR
UlLdrFifthAction fifth action BSC6900 ADD UCELLLDR(Optional)
UL LDR
UlLdrFifthAction fifth action BSC6900 ADD UNODEBLDR(Optional)
UL LDR
UlLdrFirstAction first action BSC6900 ADD UCELLLDR(Optional)
UL LDR
UlLdrFirstAction first action BSC6900 ADD UNODEBLDR(Optional)
UL LDR
fourth
UlLdrFourthAction action BSC6900 ADD UCELLLDR(Optional)
UL LDR
fourth
UlLdrFourthAction action BSC6900 ADD UNODEBLDR(Optional)
UL LDR
un-ctrl RT
Qos re-
UlLdrPsRTQosRen nego RAB
egRabNum num BSC6900 ADD UCELLLDR(Optional)
UL LDR
un-ctrl RT
Qos re-
UlLdrPsRTQosRen nego RAB
egRabNum num BSC6900 ADD UNODEBLDR(Optional)
UL LDR
release
UlLdrRelThd threshold BSC6900 ADD UCELLLDM(Optional)
UL LDR
second
UlLdrSecondAction action BSC6900 ADD UCELLLDR(Optional)
UL LDR
second
UlLdrSecondAction action BSC6900 ADD UNODEBLDR(Optional)
UL LDR
UlLdrSeventhActio seventh
n action BSC6900 ADD UCELLLDR(Optional)
UL LDR
UlLdrSixthAction sixth action BSC6900 ADD UCELLLDR(Optional)
UL LDR
Sixth
UlLdrSixthAction action BSC6900 ADD UNODEBLDR(Optional)
UL LDR
UlLdrThirdAction third action BSC6900 ADD UCELLLDR(Optional)
UL LDR
UlLdrThirdAction third action BSC6900 ADD UNODEBLDR(Optional)
UL LDR
trigger
UlLdrTrigThd threshold BSC6900 ADD UCELLLDM(Optional)
Uplink
Maximum
Number of
UlMaxNumOfTfc TFC BSC6900 ADD UNODEBLMTPARA(Optional)
UL
Measurem
ent Filter ADD UCELLQUALITYMEAS(Optional)
UlMeasFilterCoef Coefficient BSC6900 SET UQUALITYMEAS(Optional)
Uplink Mid
Bit Rate
Calculate
UlMidRateCalc Method BSC6900 SET UDCCC(Optional)
Uplink Mid
Bit Rate
Threshold[
UlMidRateThd kbit/s] BSC6900 SET UDCCC(Mandatory)
UL Mode
Change
UlModeChangeTim Timer
erLen Length[ms] BSC6900 SET UAMRC(Optional)
UL Mode
Change
UlModeChangeTim Timer
erLen Length[ms] BSC6900 SET UAMRCWB(Optional)
UL AF of
R99 non
AMR conv
UlNonAmrConvAF service BSC6900 SET UADMCTRL(Optional)
UL
threshold
of Conv
UlNonCtrlThdForA AMR
MR service BSC6900 ADD UCELLCAC(Optional)
UL
handover
UlNonCtrlThdForH access
o threshold BSC6900 ADD UCELLCAC(Optional)
UL
threshold
of Conv
UlNonCtrlThdForN non_AMR
onAMR service BSC6900 ADD UCELLCAC(Optional)
UL
threshold
UlNonCtrlThdForOt of other
her services BSC6900 ADD UCELLCAC(Optional)
UL OLC
smoothing SET ULDM(Optional)
UlOlcAvgFilterLen filter length BSC6900 SET USATLDM(Optional)
UL OLC
fast TF
restrict
UlOlcFTFRstrctRab RAB
Num number BSC6900 ADD UCELLOLC(Optional)
UL OLC
fast TF
UlOlcFTFRstrctTim restrict
es times BSC6900 ADD UCELLOLC(Optional)
UL
overload
UlOlcMeasFilterCo measure SET ULDM(Optional)
eff filter coeff BSC6900 SET USATLDM(Optional)
UL OLC
release
UlOlcRelThd threshold BSC6900 ADD UCELLLDM(Optional)
UL OLC
traff
release
UlOlcTraffRelRabN RAB
um number BSC6900 ADD UCELLOLC(Optional)
UL OLC
trigger
hysteresis[ SET ULDM(Optional)
UlOlcTrigHyst 10ms] BSC6900 SET USATLDM(Optional)
UL OLC
trigger
UlOlcTrigThd threshold BSC6900 ADD UCELLLDM(Optional)
UL PS
should be
UlPSInterRatShoul HO user
dBeHOUeNum number BSC6900 ADD UCELLLDR(Optional)
UL PS
should be
UlPSInterRatShoul ho user
dBeHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
UL PS
should not
UlPSInterRatShoul be HO user
dNotHOUeNum number BSC6900 ADD UCELLLDR(Optional)
UL PS
should not
UlPSInterRatShoul be ho user
dNotHOUeNum number BSC6900 ADD UNODEBLDR(Optional)
Adjustment
Switch For
AMR
UlQosAmrAdjSwitc Uplink
h Rate BSC6900 SET UQOSACT(Optional)
InterFreq
HO For
Switch For
UlQosAmrInterFreq Uplink
HoSwitch AMR BSC6900 SET UQOSACT(Optional)
InterRat
HO Switch
UlQosAmrInterRat For Uplink
HoSwitch AMR BSC6900 SET UQOSACT(Optional)
Up Link
Qos
Measure
timer SET UQOSHO(Optional)
ULQosMcTimerLen length[s] BSC6900 ADD UCELLQOSHO(Optional)
InterFreq
HO Switch
UlQosVpInterFreqH For Uplink
oSwitch VP BSC6900 SET UQOSACT(Optional)
Switch Of
WAMR
Uplink
UlQosWAmrAdjSwi Rate
tch Adjustment BSC6900 SET UQOSACT(Optional)
InterFreq
HO Switch
UlQosWAmrInterFr For Uplink
eqHoSwitch WAMR BSC6900 SET UQOSACT(Optional)
InterRat
HO Switch
UlQosWAmrInterR For Uplink
atHoSwitch WAMR BSC6900 SET UQOSACT(Optional)
Uplink
Rate
Decrease
Adjust
UlRateDnAdjLevel Level BSC6900 SET UDCCC(Optional)
Uplink
Rate
Increase
Adjust
UlRateUpAdjLevel Level BSC6900 SET UDCCC(Optional)
UL SF SET UCMCF(Optional)
UlSFTurnPoint threshold BSC6900 ADD UCELLCMCF(Optional)
UL AF of
UlSrbActFactor SRB BSC6900 SET UADMCTRL(Optional)
SRB
transmissio
UlSRBTransMode n mode on
OnHsupa HSUPA BSC6900 SET UFRC(Optional)
UL AF of
R99
UL
Streaming
streaming
UlStreamAF service BSC6900 SET UADMCTRL(Optional)
traffic
threshold
on
HSUPA[kbi
UlStrThsOnHsupa t/s] BSC6900 SET UFRCCHLTYPEPARA(Optional)
Streaming
traffic
transmissio
UlStrTransModeOn n mode on
Hsupa HSUPA BSC6900 SET UFRC(Optional)
Uplink
Event 6A1
Relative
Threshold[
UlThd6A1 dB] BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Uplink
Event 6A2
Relative
Threshold[
UlThd6A2 dB] BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Uplink
Event 6B1
Relative
Threshold[
UlThd6B1 dB] BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
Uplink
Event 6B2
Relative
Threshold[
UlThd6B2 dB] BSC6900 ADD UTYPRABQUALITYMEAS(Mandatory)
UL total
equivalent
user
UlTotalEqUserNum number BSC6900 ADD UCELLCAC(Optional)
UL closed
loop power
control
step
UlTpcStepSize size[dB] BSC6900 SET UFRC(Optional)
VP Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlVpTrigTime6A1 6A1[ms] BSC6900 SET UQUALITYMEAS(Optional)
VP Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlVpTrigTime6B1 6B1[ms] BSC6900 SET UQUALITYMEAS(Optional)
VP Trigger
Time ADD UCELLQUALITYMEAS(Optional)
UlVpTrigTime6D 6D[ms] BSC6900 SET UQUALITYMEAS(Optional)
Support
UNBA Balance BSC6900 SET E1T1(Optional)
Cell Center
Uncertainty
UncertAltitude Altitude[m] BSC6900 ADD USMLCCELL(Optional)
Cell Center
Uncertainty
UncertAltitudeImp Altitude[ft] BSC6900 ADD USMLCCELL(Optional)
Cell Center
Uncertainty
Semi-
UncertSemiMajor major[m] BSC6900 ADD USMLCCELL(Optional)
Cell Center
Uncertainty
UncertSemiMajorI Semi-
mp major[ft] BSC6900 ADD USMLCCELL(Optional)
Cell Center
Uncertainty
Semi-
UncertSemiMinor minor[m] BSC6900 ADD USMLCCELL(Optional)
Cell Center
Uncertainty
UncertSemiMinorI Semi-
mp minor[ft] BSC6900 ADD USMLCCELL(Optional)
UNI link
UNILNKN No. BSC6900 ADD UNILNK(Mandatory)
Up Limit
UpLimitCountingTi Counting
me Time BSC6900 SET URNCMBMSPARA(Optional)
The Upper
Logic port
UPPERVP Number BSC6900 ADD ATMLOGICPORT(Optional)
ADD UCELLURA(Mandatory)
URAId URA ID BSC6900 ADD UURA(Mandatory)
URA
Inter-freq
URANUM number BSC6900 ADD UCELLQUICKSETUP(Mandatory)
CS Used
frequency
trigger
UsedFreqCSThdEc Ec/No SET UINTERFREQHOCOV(Optional)
Inter-RAT
N0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
CS Used
frequency
trigger
UsedFreqCsThdEc Ec/No SET UINTERRATHOCOV(Optional)
Inter-freq
N0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
CS Used
frequency
trigger
UsedFreqCSThdR RSCP SET UINTERFREQHOCOV(Optional)
Inter-RAT
SCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
CS Used
frequency
trigger
UsedFreqCsThdRs RSCP SET UINTERRATHOCOV(Optional)
Inter-freq H
cp THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Used
frequency
trigger
UsedFreqHThdEcN Ec/No SET UINTERFREQHOCOV(Optional)
Inter-RAT
0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
H Used
frequency
trigger
UsedFreqHThdEcN Ec/No SET UINTERRATHOCOV(Optional)
Inter-freq H
0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Used
frequency
trigger
UsedFreqHThdRS RSCP SET UINTERFREQHOCOV(Optional)
Inter-RAT
CP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
H Used
frequency
trigger
UsedFreqHThdRsc RSCP SET UINTERRATHOCOV(Optional)
p THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
3A Used-
Freq
Measure
Inter-freq
UsedFreqMeasQua Quantity SET UQOSHO(Optional)
R99 PS
ntityForQos3A for Qos BSC6900 ADD UCELLQOSHO(Optional)
Used
frequency
trigger
Inter-RAT
UsedFreqR99PsTh Ec/No SET UINTERFREQHOCOV(Optional)
R99 PS
dEcN0 THD[dB] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Used
frequency
trigger
UsedFreqR99PsTh Ec/No SET UINTERRATHOCOV(Optional)
dEcN0 THD[dB] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Inter-freq
R99 PS
Used
frequency
trigger
Inter-RAT
UsedFreqR99PsTh RSCP SET UINTERFREQHOCOV(Optional)
R99 PS
dRSCP THD[dBm] BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Used
frequency
trigger
UsedFreqR99PsTh RSCP SET UINTERRATHOCOV(Optional)
dRscp THD[dBm] BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Mac-ehs
UseMacehs use flg BSC6900 SET UHSSCCHLESSOPPARA(Mandatory)
Use the
second
Serial
Number or
USENBLB2 not BSC6900 ADD UNODEBESN(Optional)
Use of
UseOfHcs HCS BSC6900 ADD UCELLHCS(Optional)
UserPerce
UserPercentage ntage BSC6900 ADD UCELLMBDRINTERRAT(Optional)
Percentage
of User
Plane
UserPlnSharingOut Sharing
Percentage
Offset Out Offset BSC6900 SET UUSERPLNSHAREPARA(Optional)
of User
Plane
Sharing
UserPlnSharingOut Out
Thd threshold BSC6900 SET UUSERPLNSHAREPARA(Optional)
User
UserPriority Priority BSC6900 SET USCHEDULEPRIOMAP(Mandatory)
User
UserPriority Priority BSC6900 SET UUSERGBR(Mandatory)
User
UserPriority Priority BSC6900 SET UFACHBANDWIDTH(Mandatory)
User
UserPriority Priority BSC6900 SET UUSERHAPPYBR(Mandatory)
User Name
of FTP DLD LICENSE(Mandatory)
USR Server BSC6900 ULD LICENSE(Mandatory)
Bearing
VCI VCI BSC6900 ADD AAL2PATH(Mandatory)
VLANID
VLANFlAG Flag BSC6900 ADD IPPATH(Optional)
ADD IPPATH(Mandatory)
ADD VLANID(Mandatory)
VLANID VLAN ID. BSC6900 ADD UNODEBIP(Mandatory)
VLAN ID of
First Local
VLANID1 IP address BSC6900 ADD SCTPLNK(Mandatory)
VLAN ID of
Second
Local IP
VLANID2 address BSC6900 ADD SCTPLNK(Mandatory)
VLAN SET DSCPMAP(Optional)
VLANPRI Priority BSC6900 ADD UNODEBIP(Mandatory)
UMTS
AMR voice
service
downlink
VOICEDL factor BSC6900 ADD TRMFACTOR(Optional)
AMR voice
primary
VOICEPRIPATH path BSC6900 ADD TRMMAP(Optional)
AMR voice
pri path
load
VOICEPRITH threshold BSC6900 ADD LOADEQ(Optional)
AMR voice
secondary
VOICESECPATH path BSC6900 ADD TRMMAP(Optional)
AMR voice
pri sec
path load
ratio
VOICESECWHT threshold BSC6900 ADD LOADEQ(Optional)
UMTS
AMR voice
service
uplink
VOICEUL factor BSC6900 ADD TRMFACTOR(Optional)
VOIP
channel
VoipChlType type BSC6900 SET UFRCCHLTYPEPARA(Optional)
HSUPA
TTI type of
VoipHsupaTti VOIP traffic BSC6900 SET UFRC(Optional)
Enable
Alarm
Reporting
for 24V
VOL24_MASK Power BSC6900 ADD EMU(Optional)
Upper Limit
of Alarm
for 24V
VOL24_THD_HIGH Power BSC6900 ADD EMU(Optional)
Lower Limit
of Alarm
for 24V
VOL24_THD_LOW Power BSC6900 ADD EMU(Optional)
Enable
Alarm
Reporting
for 48V
VOL48_MASK Power BSC6900 ADD EMU(Optional)
Upper Limit
of Alarm
for 48V
VOL48_THD_HIGH Power BSC6900 ADD EMU(Optional)
Lower Limit
of Alarm
for 48V
VOL48_THD_LOW Power BSC6900 ADD EMU(Optional)
Cross
connect
VPCLCXN index BSC6900 ADD VPCLCX(Optional)
Bearing
VPI VPI BSC6900 ADD AAL2PATH(Mandatory)
Cell VP
limit ADD UCELLSETUP(Optional)
VPLimitInd indicator BSC6900 ADD UCELLQUICKSETUP(Optional)
QOS
Switch For
VPQosPerform VP Traffic BSC6900 SET UQOSACT(Optional)
Threshold
of VP Call
VpRabAbnormRelR Drop
atioThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Minimum
Number of
VP RAB
VpRabEstAttMinNu Establish
m Request BSC6900 SET UKPIALMTHD(Optional)
Threshold
of VP RAB
Setup
VpRabEstSuccRati Successful
oThd Ratio[%] BSC6900 SET UKPIALMTHD(Optional)
Minimum
Number of
VP Call
VpRabRelMinNum Release BSC6900 SET UKPIALMTHD(Optional)
Wait Timer
WAmrUlRateAdjTi For WAMR
merLen Uplink[ms] BSC6900 SET UQOSACT(Optional)
Enable
Water
Alarm
WATER_MASK Reporting BSC6900 ADD EMU(Optional)
Weight for
WeightForUsedFre Used SET UINTERFREQHOCOV(Optional)
q frequency BSC6900 ADD UCELLINTERFREQHOCOV(Optional)
Weight for
WeightForUsedFre Used SET UINTERRATHOCOV(Optional)
q Frequency BSC6900 ADD UCELLINTERRATHOCOV(Optional)
Whether
affect the
WHETHERAFFEC port
TSWAP swapping BSC6900 STR IPCHK(Optional)
Receiving
window
WINDOWSIZE size BSC6900 ADD SAALLNK(Optional)
Work Area
WORKAREA Flag BSC6900 FMT DATA(Optional)
WTR
WTRT Time[Sec] BSC6900 SET MSP(Optional)
NOPRIORITY(N
WRFD- Flow Enumerati
The activity factor at the radio layer OPRIORITY),
Whether to control AC flow 040100 Control on Type ON, OFF ON, OFF
varies with the service priority. The GOLD(GOLD),
configuration of the activity factor is SILVER(SILVER NOPRIORITY
performed based on the priorities of ), , GOLD,
gold, silver, and copper. The activity WRFD- Admission Enumerati COPPER(COPP SILVER,
factor of SRB is priority insensitive. 020101 Control on Type ER) COPPER
Faulty
MRFD- Managemen Interval
Alarm ID 210304 t Type 65334~65383 65334~65383
Faulty
MRFD- Managemen Interval
Alarm ID 210304 t Type 1~65535 1~65535
Faulty flt(Fault),
Type of the alarm. The alarm can be MRFD- Managemen Enumerati evt(Event),
a fault alarm or an event alarm. 210304 t on Type all(All) flt, evt, all
Configuratio
n
Height of the specified GSP receiver MRFD- Managemen Interval
antenna 210301 t Type -1000~10000 -1000~10000
Configuratio
n
Height of the specified GSP receiver MRFD- Managemen Interval
antenna 210301 t Type -3281~32810 -3281~32810
Interval
Adjacent node identifier None None Type 0~4599 0~4599
Interval
Adjacent node identifier None None Type 0~4599 0~4599
Faulty
Altitude of the cell antenna in the
MRFD- Managemen String 1~100
WGS-84 coordinates. This is a
New name
Latitude of the
cellalarm
of parameter,
the antenna in theby 210304 t Type None characters
necessary controlled
WGS-84
MTRLGYcoordinates.
and valid when The value Cell ID +
corresponding to the latitudevalue
MET~0(metric system).The A of RTT
Altitude of the cell antenna in the
degrees
this parameter has effect on theis [A
B minutes C seconds WRFD- Function Interval -
WGS-84 coordinates. This is
+ (B/60) result.
location + (C/3600)] / 0.000001. 020801 Based LCS Type -32767~32767 32767~32767
controlled by MTRLGY and valid
For example, the value
when IMP~1(British Cell ID +
corresponding to the latitude 31
measurement).The value of this RTT -
degrees 30 minutes 36 seconds is
parameter has effect on the location WRFD- Function Interval - 107502~1075
[31 + (30/60) + (36/3600)] /
result.
Longitude 020801 Based LCS Type 107502~107502 02
0.000001 =of31510000.
the cell antenna in the
This parameter specifies the latitude
WGS-84 coordinates.
This is controlled The value
by GCDF and Cell ID +
of the cell antenna in the WGS-84
corresponding to the longitude A
valid when DEG~0(degree RTT -
coordinates. The input format is
degrees B minutes
format).The value ofCthisseconds is [A
parameter WRFD- Function Interval 90000000~9000 -90~90, step:
ddd:mm:ss.ssss.
+ (B/60)
has effect+ on
(C/3600)] / 0.000001.
the location result. 020801 Based LCS Type 0000 0.000001
This is controlled by GCDF and
For example, the value
valid when SEC~1(degree, minute, Cell ID +
corresponding to the longitude 121
second format).The value of this RTT
degrees 40 minutes 36 seconds is
parameter has effect on the location WRFD- Function String
[121 + (40/60) + (36/3600)] /
result. 020801 Based LCS Type None -90~90
0.000001 = 121676666. This is
controlled by GCDF and valid when Cell ID +
DEG~0(degree format).The value of RTT - -180~180,
Longitude of the cell antenna in the
this parameter has effect on the WRFD- Function Interval 180000000~180 step:
WGS-84 coordinates.The input
location result. 020801 Based LCS Type 000000 0.000001
format is ddd:mm:ss.ssss. This is
controlled by GCDF and valid when Cell ID +
SEC~1(degree, minute, second RTT
format).The value of this parameter WRFD- Function String
has effect on the location result. 020801 Based LCS Type None -180~180
Coverage angle of a sector. For an Cell ID +
omni-directional cell, the value is RTT
360.The value of this parameter has WRFD- Function Interval 0~360, step:
effect on the location result. 020801 Based LCS Type 0~3600 0.1
Azimuth of the main lobe of the cell
antenna (the clockwise angle from
the north to the direction of the main Cell ID +
lobe).The value of this parameter RTT
may affect the UE's final location WRFD- Function Interval 0~360, step:
Meaning:
result. Access point (AP) cell 020801 Based LCS Type 0~3600 0.1
indicator. When the indicator is
"TRUE", it indicates that the cell is
an AP cell. AP is a device for
Enumerati OFF(OFF),
accessing the UMTS wireless
E1T1 anti-error switch. None None on Type ON(ON) OFF, ON
network. This device integrates the
functions of the NodeB software and SRNS
parts of the functions of the RNC Relocation
software. It is applied to households WRFD- Introduction Enumerati TRUE,
Upper layer application type of the IP
and SOHO users. 020605 Package on Type TRUE, FALSE FALSE
SCTP link. The upper layer Transmissio
application type of the Iub interface n
is NBAP. The upper layer Introduction
application type of the Iur, IuPS, and WRFD- on Iu Enumerati NBAP(NBAP),
3.4/6.8/13.6 APPLIED_ON_ APPLIED_ON
IuCS interface is M3UA. 050409 Interface on Type M3UA(M3UA) NBAP, M3UA
/27.2 kbit/s UPLINK, _UPLINK,
RRC APPLIED_ON_ APPLIED_ON
This parameter specifies the Connection DOWNLINK, _DOWNLINK,
direction where the current typical WRFD- and RAB Enumerati APPLIED_ON_B APPLIED_ON
PRIMARY(Prima
RAB parameters are applied. 010510 Assignmenton Type OTH _BOTH
ry Area),
BSC/RNC STANDBY(Stan
Software dby Area), PRIMARY,
MRFD- Managemen Enumerati ALL(Primary and STANDBY,
Area flag 210401 t on Type Standby Area) ALL
BSC/RNC PRIMARY(Prima
Software ry),
MRFD- Managemen Enumerati STANDBY(Stan PRIMARY,
Area flag 210401 t on Type dby) STANDBY
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 10. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 11. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 12. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 13. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 14. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 1. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 2. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 3. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 4. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 5. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 6. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 7. 050424 Transport on Type Copper Copper
Traffic
Priority
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
Allocation/Retention priority 8. 050424 Transport on Type Copper Copper
Traffic
Priority
Retransmission times upon ARP
User_priority corresponding to WRFD- Mapping on Enumerati Gold, Silver, Gold, Silver,
timeout. When the ARP request
Allocation/Retention priority 9. 050424 Transport on Type Copper Copper
times exceeds the retransmission
time without a response, the
ARP/BFD detection failure alarm is IP Re-route
reported. This may trigger the port WRFD- Based on Interval
or board switchover. 050421 BFD/ARP Type 3~10 3~10
IP Re-route
power, env,
WRFD- Based on Interval
sig, trunk,
ARP packet timeout time 050421 BFD/ARP Type 3~10 3~10
power, env, sig, hardware,
trunk, hardware, software, run,
Network management type of the Faulty software, run, comm,
alarm. By default, all network MRFD- Managemen Bit Field comm, service, service,
management types are selected. 210304 t Type handle handle
hardware(Hardw
are System),
software(Softwar
e System),
run(Running power, env,
System), sig, trunk,
comm(Communi hardware,
cation System), software, run,
Network management type of the Faulty service(QoS), comm,
alarm. By default, all network MRFD- Managemen Enumerati handle(Processi service,
When the operation and
management types are selected. 210304 t on Type ng Error) handle
maintenance channel of NodeB is
operating in the ATM, this
parameter indicates the slot number
of the interface board of the WRFD- Interval
When the operation and
BSC6900 interworking with NodeB. 031101 DHCP Type 0~5,8~27 0~5, 8~27
maintenance channel of NodeB is
Indicating whether attach/detach is
operating in the ATM, this
allowed. NOT_ALLOWED indicates
parameter indicates the subrack
that MS(Mobile Station) cannot
number of the interface board of the WRFD- Interval
apply the IMSI attach/detach
BSC6900 interworking with NodeB. 031101 DHCP Type 0~11 0~11
procedure. ALLOWED indicates that
MS(Mobile Station) can apply the
IMSI attach/detach procedure. It is 3GPP NOT_ALLOW
valid only when [CN domain ID] is WRFD- Specificatio Enumerati NOT_ALLOWE ED,
set as CS_DOMAIN. 010101 ns on Type D, ALLOWED ALLOWED
Interval
It specifies the loopback duration. None None Type 1~65535 1~65535
Interval
It specifies the test duration. None None Type 1~60 1~60
NONE(Verify
Security None),
SSL authentication mode of the MRFD- Managemen Enumerati PEER(Verify
peer certificate 210305 t on Type Peer Certificate) NONE, PEER
SERVER(SERV
ER),
Validation mode of the PPP or MP Enumerati CLIENT(CLIENT SERVER,
link negotiation None None on Type ) CLIENT
SERVER(SERV
ER),
Validation mode of the PPP or MP Enumerati CLIENT(CLIENT SERVER,
link negotiation None None on Type ) CLIENT
Faulty
MRFD- Managemen Enumerati LOW(LOW),
Alarm level for a digital port 210304 t on Type HIGH(HIGH) LOW, HIGH
O1E6_R1E7(OC
CCUR:1E-9, O1E4_R1E5,
O1E5_R1E6(OC
CUR:1E-8,
CUR:1E-6,
RECOVERY:1E- O1E5_R1E6,
CUR:1E-5,
RECOVERY:1E-
RECOVERY:1E-
10), O1E6_R1E7,
RECOVERY:1E-
9),
7),
O1E10_R1E11( O1E7_R1E8,
6),
O1E9_R1E10(O O1E3_R1E4,
O1E7_R1E8(OC
OCCUR:1E-10, O1E8_R1E9,
O1E6_R1E7(OC
CCUR:1E-9, O1E4_R1E5,
Threshold of B1 and B2 signal CUR:1E-7,
RECOVERY:1E- O1E9_R1E10
CUR:1E-6,
RECOVERY:1E- O1E5_R1E6,
degrade. This parameter specifies RECOVERY:1E-
11), ,
RECOVERY:1E-
10), O1E6_R1E7,
the generation threshold and the 8),
O1E11_R1E12( O1E10_R1E1
7),
O1E10_R1E11( O1E7_R1E8,
recovery threshold of the B1B2 O1E8_R1E9(OC
OCCUR:1E-11, 1,
O1E7_R1E8(OC
OCCUR:1E-10, O1E8_R1E9,
signal degradation threshold in SDH Enumerati CUR:1E-8,
RECOVERY:1E- O1E11_R1E1
Threshold of B1 and B2 signal CUR:1E-7,
RECOVERY:1E- O1E9_R1E10
frames at the optical port. None None on Type RECOVERY:1E-
12) 2
failure. This parameter specifies the RECOVERY:1E-
11), ,
9), O1E4_R1E5,
generation threshold and the 8),
O1E11_R1E12( O1E10_R1E1
O1E9_R1E10(O O1E5_R1E6,
recovery threshold of the B1B2 O1E8_R1E9(OC
OCCUR:1E-11, 1,
CCUR:1E-9, O1E6_R1E7,
signal failure threshold in SDH Enumerati CUR:1E-8,
RECOVERY:1E- O1E11_R1E1
Threshold of B3 signal degrade. RECOVERY:1E- O1E7_R1E8,
frames at the optical port. None None on Type RECOVERY:1E-
12) 2
This parameter specifies the 10), O1E8_R1E9,
9), O1E4_R1E5,
generation threshold and the O1E10_R1E11( O1E9_R1E10
O1E9_R1E10(O O1E5_R1E6,
recovery threshold of the B3 signal OCCUR:1E-10, ,
CCUR:1E-9, O1E6_R1E7,
degradation threshold in SDH Enumerati RECOVERY:1E- O1E10_R1E1
Threshold of B3 signal failure. This RECOVERY:1E- O1E7_R1E8,
frames at the optical port. None None on Type 11) 1
parameter specifies the generation 10), O1E8_R1E9,
threshold and the recovery O1E10_R1E11( O1E9_R1E10
threshold of the B3 signal failure OCCUR:1E-10, ,
threshold in SDH frames at the Enumerati RECOVERY:1E- O1E10_R1E1
optical port. None None on Type 11) 1
Security
MRFD- Managemen String 0~200
Directory for saving the backup file 210305 t Type None characters
Configuratio
n
Path (complete path) of the backup MRFD- Managemen String 0~128
file. 210301 t Type None characters
IP Re-route
WRFD- Based on IP Address Band1,
0.0.0.0~255.2
IP address of the backup port 050421 BFD/ARP Type None Band2,
55.255.255
Band3,
Band4,
IP Re-route
Band1, Band2, Band5,
WRFD- Based on IP Address 0.0.0.0~255.2
Band3, Band4, Band6,
Mask of the backup port 050421 BFD/ARP Type None 55.255.255
Band5, Band6, Band7,
Band7, Band8, Band8,
This parameter specifies the Band9, Band9,
selected frequency bands during WRFD- Operating Enumerati BandIndNotUse BandIndNotU
cell setup. 010102 Multi-band on Type d sed
GSM900_DCS1
800_BAND_US
ED(Use
GSM900M or
Band1,
When the inter-RAT cell frequency 1800M
Band2,
number is within the range 512-810, frequency band), GSM900_DC
Band3,
the parameter indicates whether this Inter-RAT PCS1900_BAN S1800_BAND
Band4,
This parameter
frequency numberspecifies
belongs theto the Handover D_USED(Use _USED,
Band1, Band2, Band5,
maximum
DSC1800 available
or PCS1900 bandwidth
frequencyfor WRFD- Based on Enumerati GSM1900M PCS1900_BA
Band3, Band4, Band6,
each
band.traffic class in the Cell_FACH 020303 Coverage on Type frequency band) ND_USED
Indicating the selected frequency Band5, Band6, Band7,
state with the downlink HSDSCH in
Band in the cell setup process. For Band7, Band8, Band8,
use. If the actual data flow exceeds
detailed
Identifyinginformation
BCCH of this number
frequency 3GPP Band9, Band9,
the maximum bandwidth, the traffic
parameter,
of refer
the inter-RAT to 3GPP
cell. TS WRFD- Specificatio Enumerati BandIndNotUse BandIndNotU
is buffered so that the buffer
25.433.
BCCH: 010101 ns on Type d sed
occupancy is increased. AsChannel
Broadcast Control a result,
GSM1900
the state transition from Cell-FACH
Frequency
to CELL-DCH number: (511-811)
occurs. This
GSM1800
parameter should be set according WRFD- Enhanced Interval
Frequency
to the trafficnumber:
class. (511-866) 010688 CELL-FACH Type 1~1000 1~1000
GSM900
Inter-RAT
Frequency number: (0-125) or (954-
Handover
1024)
Uniquely identifying a neighboring WRFD- Based on Interval
GSM850
base station with the same carrier 020303 Coverage Type 0~7 0~7
Frequency number: (127-252)
GSM450 Inter-RAT
This parameter specifies the
Frequency number: (258-294) Handover
transmission power of the HS-
GSM480 WRFD- Based on Interval
PDSCH that sends the data carried
Frequency number: (305-341) 020303 Coverage Type 0~1023 0~1023
on the BCCH. When UE receive
data from the HS-PDSCH in
When UE is in Enhanced
Enhanced CELL_FACH state, the
CELL_FACH state, the data on the
data on the BCCH is also sent on WRFD- Enhanced Interval -35~15,
BCCH is also sent on the HS-
the HS-PDSCH. 010688 CELL-FACH Type -350~150 step:0.1
PDSCH. Meanwhile, the HS-SCCH
shall send signaling related to HS-
PDSCH. This parameter specifies
DSP bearer type.power of the HS-
the transmission WRFD- Enhanced Interval -35~15,
MTP3:
SCCH at indicates that the lower layer
the time. 010688 CELL-FACH Type -350~150 step:0.1
Offset of the BCH transmit power
bearer is the MTP3 used in
from the PCPICH transmit power in
ATM/TDM scenario;
a cell. For detailed information of Open Loop
M3UA: indicates that the lower layer
this parameter, refer to 3GPP TS WRFD- Power Interval -35~15, step:
bearer is the M3UA used in IP IP
25.433 and TS 25.331. 020501 Control Type -350~150 0.1
scenario; Transmissio
MTP3_M3UA: indicates that the n MTP3(MTP3),
lower layer bearer is the MTP3 and Introduction M3UA(M3UA),
M3UA used in ATM/TDM/IP WRFD- on Iu Enumerati MTP3_M3UA(M MTP3, M3UA,
This parameter specifies the bearer
scenario. 050409 Interface on Type TP3 and M3UA) MTP3_M3UA
type of the service.
- R99: The service is carried on a Traffic
Threshold of continuous failed
non-HSPA channel. Priority
heartbeat detecting between the two
- HSPA: The service is carried on an WRFD- Mapping on Enumerati
RNCs in a RNC pool.If the heartbeat
HSPA channel. 050424 Transport on Type R99, HSPA R99, HSPA
is not detected from the peer RNC
for a successive number of times
specified by this parameter, the RNC Node
local RNC considers that the peer WRFD- Redundanc Interval
If the heartbeats are detected from
RNC is faulty. 040202 y Type 1~10 5
the peer RNC for a successive
number of times specified by this
parameter, the local RNC considers 3GPP
that the peer RNC is normally WRFD- Specificatio Interval
working. 010101 ns Type 1~10 2
handover for the Best Effort (BE)
service on DCH. If current DL DCH
bit rates of all the BE services of a
user are lower than or equal to this
threshold, the system will perform
soft handover for this user to
guarantee the service quality. When
the velocity of the downlink DCH
Interval for the local RNC sending RNC Node
exceeds the restriction of this
the heartbeat to the peer RNC in the WRFD- Redundanc Interval
parameter, RNC will perform intra- Intra RNC
same RNC pool. 040202 y Type 1~60 1~60
frequency hard handover. To avoid Softer
the great effect of the system WRFD- Handover D8, D16, D32,
capacity when multi-links transmit a 020202 Inter RNC D64, D128, 8, 16, 32, 64,
great deal of the same data in the WRFD- Soft Enumerati D144, D256, 128, 144,
Timer for state transition from CPC
macro diversity. 020203 Handover on Type D384 256, 384
to E_FACH of BE services, used to
check whether the UE in the
CELL_DCH(with CPC) state with BE
services is in the stable low activity WRFD- Enhanced Interval
Timer for state transition from CPC
state. 010688 CELL-FACH Type 1~65535 1~65535
to FACH of BE services, used to CPC - DTX /
check whether the UE in the WRFD- DRX
CELL_DCH(with CPC) state with BE 010686 CPC - HS-
services is in the stable low activity WRFD- SCCH
Dynamicless Interval
Timer for state transition from DCH
state. 010687 operation
Channel Type 1~65535 1~65535
to E_FACH of BE services, used to
check whether the UE in the Configuratio
UE State in
CELL_DCH(with DCH) state with n Control
Connected
BE services is in the stable low WRFD- (DCCC)
Enhanced Interval
Timer for state transition from DCH Dynamic
Mode
activity state. 010688 Inter
CELL-FACH Type 1~65535 1~65535
to FACH of BE services, used to Channel
(CELL-
Frequency
check whether the UE in the Configuratio
DCH, CELL-
Hard
CELL_DCH state with non-real-time n Control
PCH, URA-
The first action selected by the QoS Handover
services is in the stable low activity WRFD- (DCCC)
PCH, CELL- Interval
control algorithm when the DL QoS WRFD- Dynamic
Based on
state. 010202 Inter
FACH) Type 1~65535 1~65535
of BE service deteriorates.If QoS 021101 Channel
DL QoS
Frequency
action is RateDegrade, then the rate WRFD- Configuratio
Inter-RAT None, None,
Hard
will be downsized to the full 020304 n Control
Handover RateDegrade, RateDegrade,
The second action selected by the Handover
coverage rate according to 3-rates WRFD- (DCCC)
Based on Enumerati InterFreqHO, InterFreqHO,
QoS control algorithm when the DL WRFD- Based on
rule. 020309 Inter
DL QoS on Type InterRatHO InterRatHO
QoS of BE service deteriorates.If 021101 DL QoS
Frequency
QoS action is RateDegrade, then WRFD- Inter-RAT None, None,
Hard
the rate will be downsized to the full 020304 Handover RateDegrade, RateDegrade,
The third action selected by the Handover
coverage rate according to 3-rates WRFD- Based on Enumerati InterFreqHO, InterFreqHO,
QoS control algorithm when the DL WRFD- Based on
rule. 020309 DL QoS on Type InterRatHO InterRatHO
QoS of BE service deteriorates.If 021101 DL QoS
QoS action is RateDegrade, then WRFD- Inter-RAT None, None,
UE State in
the rate will be downsized to the full 020304 Handover RateDegrade, RateDegrade,
Connected
coverage rate according to 3-rates WRFD- Based on Enumerati D16, D32, D64,
InterFreqHO, InterFreqHO,
Timer for state transition from E- Mode
rule. 020309 DL QoS on Type D128, D256,
InterRatHO 16, 32, 64,
InterRatHO
DCH to FACH of BE services, used (CELL-
D512, D1024, 128, 256,
to check whether the UE in the DCH, CELL-
D2k, D3k, D4k, 512, 1024,
CELL_DCH(with E-DCH) state with PCH, URA-
Enhanced D6k, D8k, D12k, 2k, 3k, 4k, 6k,
BE services is in the stable low WRFD- PCH, CELL- Interval
WRFD- CELL-FACH D16k, D24k, 8k, 12k, 16k,
activity state. 010202 FACH) Type 1~65535 1~65535
010688 CPC - DTX / D32k, D48k, 24k, 32k, 48k,
This parameter specifies the WRFD- DRX D64k, D96k, 64k, 96k,
This parameter specifies the
threshold of the traffic volume of 4A 010686 CPC - HS- D128k, D192k, 128k, 192k,
occurrence time of 4A event for Enhanced D0, D10, D20, 0, 10, 20, 40,
event for triggering the transition of WRFD- SCCH less Enumerati D256k, D384k, 256k, 384k,
triggering the transition of BE WRFD- CELL-FACH D40, D60, D80, 60, 80, 100,
BE services from E_FACH to CPC. 010687 operation on Type D512k, D768k 512k, 768k
services from E_FACH to CPC. This 010688 CPC - DTX / D100, D120, 120, 160,
parameter prevents unnecessary WRFD- DRX D160, D200, 200, 240,
reports that are caused by traffic 010686 CPC - HS- D240, D320, 320, 640,
volume instability from being WRFD- SCCH less Enumerati D640, D1280, 1280, 2560,
triggered. 010687 operation on Type D2560, D5000 5000
D16, D32, D64,
D128, D256, 16, 32, 64,
D512, D1024, 128, 256,
D2k, D3k, D4k, 512, 1024,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
D16k, D24k, 8k, 12k, 16k,
D32k, D48k, 24k, 32k, 48k,
This parameter specifies the D64k, D96k, 64k, 96k,
This parameter specifies the
threshold of the traffic volume of 4A D128k, D192k, 128k, 192k,
occurrence time of 4A event for D0, D10, D20, 0, 10, 20, 40,
event for triggering the transition of WRFD- Enhanced Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
triggering the transition of BE D40, D60, D80, 60, 80, 100,
BE services from E_FACH to DCH. 010688 CELL-FACH on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
services from E_FACH to DCH. This D100, D120, 120, 160,
D512, D1024, 128, 256,
parameter prevents unnecessary D160, D200, 200, 240,
D2k, D3k, D4k, 512, 1024,
reports that are caused by traffic D240, D320, 320, 640,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
volume instability from being WRFD- Enhanced Enumerati D640, D1280, 1280, 2560,
D16k, D24k, 8k, 12k, 16k,
triggered. 010688 CELL-FACH on Type D2560, D5000 5000
This parameter specifies the D32k, D48k, 24k, 32k, 48k,
threshold of the traffic volume of 4A D64k, D96k, 64k, 96k,
This parameter specifies the
event for triggering the transition of D128k, D192k, 128k, 192k,
occurrence time of 4A event for D0, D10, D20, 0, 10, 20, 40,
BE services from E_FACH to HS- WRFD- Enhanced Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
triggering the transition of BE D40, D60, D80, 60, 80, 100,
DSCH. 010688 CELL-FACH on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
services from E_FACH to HS- D100, D120, 120, 160,
D512, D1024, 128, 256,
DSCH. This parameter prevents D160, D200, 200, 240,
D2k, D3k, D4k, 512, 1024,
unnecessary reports that are D240, D320, 320, 640,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
caused by traffic volume instability WRFD- Enhanced Enumerati D640, D1280, 1280, 2560,
D16k, D24k, 8k, 12k, 16k,
from being triggered. 010688 CELL-FACH on Type D2560, D5000 5000
This parameter specifies the CPC - DTX / D32k, D48k, 24k, 32k, 48k,
threshold of the traffic volume of 4A WRFD- DRX D64k, D96k, 64k, 96k,
This parameter specifies the
event for triggering the transition of 010686 CPC - HS- D128k, D192k, 128k, 192k,
occurrence time of 4A event for D0, D10, D20, 0, 10, 20, 40,
BE services from FACH to E-DCH WRFD- SCCH less Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
triggering the transition of BE D40, D60, D80, 60, 80, 100,
with CPC technology. 010687 operation on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
services from FACH to E-DCH with CPC - DTX / D100, D120, 120, 160,
D512, D1024, 128, 256,
CPC technology. This parameter WRFD- DRX D160, D200, 200, 240,
D2k, D3k, D4k, 512, 1024,
prevents unnecessary reports that 010686 CPC - HS- D240, D320, 320, 640,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
are caused by traffic volume WRFD- SCCH less Enumerati D640, D1280, 1280, 2560,
D16k, D24k, 8k, 12k, 16k,
instability from being triggered. 010687 operation on Type D2560, D5000 5000
This parameter specifies the CPC - DTX / D32k, D48k, 24k, 32k, 48k,
This parameter specifies the
threshold of the traffic volume of 4A WRFD- DRX D64k, D96k, 64k, 96k,
occurrence time of 4A event for
event for triggering the transition of 010686 CPC - HS- D128k, D192k, 128k, 192k,
triggering the transition of BE D0, D10, D20, 0, 10, 20, 40,
BE services from FACH to HS- WRFD- SCCH less Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
services from FACH to HS-DSCH D40, D60, D80, 60, 80, 100,
DSCH with CPC technology. 010687 operation on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
with CPC technology. This CPC - DTX / D100, D120, 120, 160,
D512, D1024, 128, 256,
parameter prevents unnecessary WRFD- DRX D160, D200, 200, 240,
UE State in D2k, D3k, D4k, 512, 1024,
reports that are caused by traffic 010686 CPC - HS- D240, D320, 320, 640,
Connected D6k, D8k, D12k, 2k, 3k, 4k, 6k,
volume instability from being WRFD- SCCH less Enumerati D640, D1280, 1280, 2560,
Mode D16k, D24k, 8k, 12k, 16k,
triggered. 010687 operation on Type D2560, D5000 5000
(CELL- D32k, D48k, 24k, 32k, 48k,
This parameter specifies the DCH, CELL- D64k, D96k, 64k, 96k,
This parameter specifies the UE State in
threshold of the traffic volume of 4A PCH, URA- D128k, D192k, 128k, 192k,
occurrence time of 4A event for Connected D0, D10, D20, 0, 10, 20, 40,
event for triggering the transition of WRFD- PCH, CELL- Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
triggering the transition of BE Mode D40, D60, D80, 60, 80, 100,
BE services from FACH to DCH. 010202 FACH) on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
services from FACH to DCH. This (CELL- D100, D120, 120, 160,
D512, D1024, 128, 256,
parameter prevents unnecessary DCH, CELL- D160, D200, 200, 240,
UE State in D2k, D3k, D4k, 512, 1024,
reports that are caused by traffic PCH, URA- D240, D320, 320, 640,
Connected D6k, D8k, D12k, 2k, 3k, 4k, 6k,
volume instability from being WRFD- PCH, CELL- Enumerati D640, D1280, 1280, 2560,
Mode D16k, D24k, 8k, 12k, 16k,
triggered. 010202 FACH) on Type D2560, D5000 5000
(CELL- D32k, D48k, 24k, 32k, 48k,
This parameter specifies the DCH, CELL- D64k, D96k, 64k, 96k,
This parameter specifies the UE State in
threshold of the traffic volume of 4A PCH, URA- D128k, D192k, 128k, 192k,
occurrence time of 4A event for Connected D0, D10, D20, 0, 10, 20, 40,
event for triggering the transition of WRFD- PCH, CELL- Enumerati D256k, D384k, 256k, 384k,
triggering the transition of BE Mode D40, D60, D80, 60, 80, 100,
BE services from FACH to E-DCH. 010202 FACH) on Type D512k, D768k 512k, 768k
services from FACH to E-DCH. This (CELL- D100, D120, 120, 160,
parameter prevents unnecessary DCH, CELL- D160, D200, 200, 240,
reports that are caused by traffic PCH, URA- D240, D320, 320, 640,
volume instability from being WRFD- PCH, CELL- Enumerati D640, D1280, 1280, 2560,
triggered. 010202 FACH) on Type D2560, D5000 5000
D16, D32, D64,
D128, D256, 16, 32, 64,
D512, D1024, 128, 256,
D2k, D3k, D4k, 512, 1024,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
D16k, D24k, 8k, 12k, 16k,
This parameter specifies the D32k, D48k, 24k, 32k, 48k,
threshold of the traffic volume of 4A D64k, D96k, 64k, 96k,
This parameter specifies the
event for triggering the transition of HSDPA D128k, D192k, 128k, 192k,
occurrence time of 4A event for D0, D10, D20, 0, 10, 20, 40,
BE services from FACH to HS- WRFD- State Enumerati D256k, D384k, 256k, 384k,
triggering the transition of BE D40, D60, D80, 60, 80, 100,
DSCH. 01061111 Transition on Type D512k, D768k 512k, 768k
services from FACH to HS-DSCH. D100, D120, 120, 160,
This parameter prevents D160, D200, 200, 240,
UE State in
unnecessary reports that are HSDPA D240, D320, 320, 640,
Connected
caused by traffic volume instability WRFD- State Enumerati D640, D1280, 1280, 2560,
Mode
from being triggered. 01061111 Transition on Type D2560, D5000 5000
Timer for state transition from FACH (CELL-
or E_FACH to PCH of BE services, DCH, CELL-
used to check whether the UE in the PCH, URA-
CELL_FACH state is in the stable WRFD- PCH, CELL- Interval
Timer for state transition from HSPA
low activity state. 010202 FACH) Type 1~65535 1~65535
to E_FACH of BE services, used to
check whether the UE in the
CELL_DCH(with HSPA) state with
BE services is in the stable low WRFD- Enhanced Interval
Timer for state transition from HS-
activity state. 010688 CELL-FACH Type 1~65535 1~65535
DSCH to FACH of BE services,
used to check whether the UE in the
CELL_DCH(with HS-DSCH) state HSDPA D8, D16, D32,
with BE services is in the stable low WRFD- State Interval D64, D128,
Pending time after the traffic volume
activity state. 01061111 Transition Type D256, D512,
1~65535 8, 16, 32, 64,
1~65535
event 4B for state transition from
D1024, D2k, 128, 256,
HSPA to FACH is reported. This D250, D500, 250, 500,
D3k, D4k, D6k, 512, 1024,
parameter is used to prevent too HSDPA D1000, D2000, 1000, 2000,
D8k, D12k, 2k, 3k, 4k, 6k,
many traffic volume events 4B being WRFD- State Enumerati D4000, D8000, 4000, 8000,
This parameter is used to check D16k, D24k, 8k, 12k, 16k,
reported. 01061111 Transition on Type D16000 16000
whether the UE in the low activity D32k, D48k, 24k, 32k, 48k,
state. If the UE is on HS-DSCH D64k, D96k, 64k, 96k,
When the traffic volume is below the
channel, the low activity counter HSDPA D128k, D192k, 128k, 192k,
4B threshold and remains so for the D0, D10, D20, 0, 10, 20, 40,
increases by 1 every time traffic WRFD- State Enumerati D256k, D384k, 256k, 384k,
period specified by this parameter, D40, D60, D80, 60, 80, 100,
volume event 4B is reported. 01061111 Transition on Type D512k, D768k 512k, 768k
the event 4B is reported. This D100, D120, 120, 160,
This parameter specifies the rate
parameter prevents unnecessary D160, D200, 200, 240,
threshold of 2ms TTI on the E-DCH
traffic volume events that are HSDPA D240, D320, 320, 640,
for HSUPA BE service. When the
caused by traffic volume instability WRFD- State Enumerati D640, D1280, 1280, 2560,
cell capability and UE capability D8, D16, D32,
Timer for rejecting
from being rate increase
triggered. 01061111 Transition on Type D2560, D5000 5000
allows 2ms TTI, 2ms TTI on the E- D64, D128, 8, 16, 32, 64,
after rate decrease is performed
DCH is used if the PS BE service D144, D256, 128, 144,
across the Iur interface for BE
carried on HSUPA with uplink rate D384, D608, 256, 384,
services. If the best cell is on the
isn't less than this threshold. WRFD- HSUPA
Dynamic Enumerati D1440, D2048, 608, 1440,
DRNC, the timer starts when rate
Otherwise, 10ms TTI is used. 01061403 2ms TTI
Channel on Type D2880 2048, 2880
decrease based on RLC Dynamic
retransmission is triggered. Before Configuratio
Channel
the timer expires, requests for rate n Control
Configuratio
increase triggered by DL traffic WRFD- (DCCC)
n Control Interval
The relative power margin of single
volume event 4A will be rejected. 021101 Inter
(DCCC) Type 0~1024 0~1024
BE traffic, used to calculate the Dynamic
When the parameter is set to YES, Frequency
triggering threshold of event F, can Channel
the QOS control algorithm is used Hard
avoid the fluctuation of traffic rate in Configuratio
for BE services. When the Handover
case the power becomes restricted WRFD- n Control Interval 0~10, step:
parameter is set to NO, the QOS WRFD- Based on
after rate is increased. 021101 (DCCC) Type 0~100 0.1
control algorithm is not used for BE 021101 DL QoS
services.The QOS actions of BE WRFD- Inter-RAT
services include rate downsizing, 020304 Handover
inter frequency handover and inter WRFD- Based on Enumerati
rat handover. 020309 DL QoS on Type NO, YES NO, YES
Dynamic
This parameter specifies the power Channel
occupancy of the control part of Configuratio
reference TFC. For details of this n Control
Inner Loop
parameter, refer to the 3GPP TS WRFD- (DCCC)
Power Interval
Dynamic
25.214. 020504 Inter
Control Type 1~15 1~15
This parameter specifies the power Channel
Frequency
occupancy of the data part of Configuratio
Hard
reference TFC. For details of this n Control
Inner Loop
The first action selected by the QoS Handover
parameter, refer to the 3GPP TS WRFD- (DCCC)
Power Interval
control algorithm when the UL QoS WRFD- Dynamic
Based on
25.214. 020504 Inter
Control Type 1~15 1~15
of BE service deteriorates.If QoS 021101 Channel
DL QoS
Frequency
action is RateDegrade, then the rate WRFD- Configuratio
Inter-RAT None, None,
Hard
will be downsized to the full 020304 n Control
Handover RateDegrade, RateDegrade,
The second action selected by the Handover
coverage rate according to 3-rates WRFD- (DCCC)
Based on Enumerati InterFreqHO, InterFreqHO,
QoS control algorithm when the UL WRFD- Dynamic
Based on
rule. 020309 Inter
DL QoS on Type InterRatHO InterRatHO
For BE
QoS of service,
BE service When the
deteriorates.If 021101 Channel
DL QoS
Frequency
parameter
QoS actionisisset to SINGLE, then
RateDegrade, an UL WRFD- Configuratio
Inter-RAT None, None,
Hard
event
the rate6A1willorbe5Adownsized
can independently
to the full 020304 n Control
Handover RateDegrade, RateDegrade,
The third action selected by the Handover
trigger
coverage therate
QOS enhancement
according to 3-rates WRFD- (DCCC)
Based on Enumerati InterFreqHO, InterFreqHO,
QoS control algorithm when the UL WRFD- Dynamic
Based on
action.
rule. The 6A1, 5A switch settings 020309 Inter
DL QoS on Type InterRatHO InterRatHO
QoS of BE service deteriorates.If 021101 Channel
DL QoS
decide whether to perform 6A1 or Frequency
QoS action is RateDegrade, then WRFD- Configuratio
Inter-RAT None, None,
5A measurement control. When the Hard
the rate will be downsized to the full 020304 n Control
Handover RateDegrade, RateDegrade,
parameter is set to COMBINE, only Handover
coverage rate according to 3-rates WRFD- (DCCC)
Based on Enumerati InterFreqHO, InterFreqHO,
combined events 6A1+5A can WRFD- Dynamic
Based on
rule. 020309 Inter
DL QoS on Type InterRatHO InterRatHO
trigger the QOS enhancement 021101 Channel
DL QoS
Frequency
action, and whether to perform 6A1 WRFD- Configuratio
Inter-RAT
Hard
and 5A measurement is not 020304 n Control
Handover
Handover
controlled by the 6A1 and 5A WRFD- (DCCC)
Based on Enumerati SINGLE, SINGLE,
WRFD- Dynamic
Based on
measurement switch. 020309 Inter
DL QoS on Type COMBINE COMBINE
Event 5A measurement switch when 021101 Channel
DL QoS
Frequency
BeUlEvTrigInd is set to SINGLE for WRFD- Configuratio
Inter-RAT
Hard
BE service. If this parameter is set 020304 n Control
Handover
Handover
to YES, event 5A measurement is WRFD- (DCCC)
Based on Enumerati
WRFD- Dynamic
Based on
delivered. 020309 Inter
DL QoS on Type NO, YES NO, YES
Event 6A1 measurement switch 021101 Channel
DL QoS
Frequency
when BeUlEvTrigInd is set to WRFD- Configuratio
Inter-RAT
Hard
SINGLE for BE service. If this 020304 n Control
Handover
Handover
Timer to trigger
parameter is setthe next QoS
to YES, event 6A1 WRFD- (DCCC)
Based on Enumerati
WRFD- Based on
enhancement
measurement action for UL BE
is delivered. 020309 Inter
DL QoS on Type NO, YES NO, YES
021101 DL QoS
services. This parameter specifies Frequency
UL event 6D measurement switch WRFD- Inter-RAT
the duration of waiting for the UL Hard
for BE service. If this parameter is 020304 Handover
QoS enhanced acknowledgement Handover
set to YES, event 6D measurement WRFD- Based on Enumerati
after UL rate adjustment. WRFD- Based on
is delivered. 020309 DL QoS on Type NO, YES NO, YES
The timer starts when the BE UL 021101 DL QoS
rate adjustment procedure is WRFD- Inter-RAT
triggered, and stops when the RNC 020304 Handover
receives a 6B1/6B2 event or when WRFD- Based on Interval
the timer expires. 020309 DL QoS Type 20~64000 20~64000
The MAC-c flow on the Iub interface
Timeout times of the BFD packet. If
will increase after Enhanced
several consecutive BFD packets IP Re-route
CELL_FACH is supported in the
are not received, the BFD session is WRFD- Based on Interval
cell. When the UE enters the
set to the DOWN state. 050421 BFD/ARP Type 3~10 3~10
Enhanced CELL_FACH state, this
parameter determines the
guaranteed speed of the MAC-c
flow that sends background service WRFD- Enhanced Interval
data on the Iub interface. 010688 CELL-FACH Type 1~1000 1~1000
(1) This parameter, along with the
The MAC-cstart
[Algorithm flowtime],
on Iubisinterface
used to limit will
increase
the validationafter time the Enhanced
of the
This parameter is applied when
CELL_FACH
background is supported in the
"BGNSwitch"noise is setautomatic
to ON. (1)update If the
cell. When
algorithm. the UE enters the
difference If of[Algorithm
measured stop time] is
background
Enhanced
greater than CELL_FACH
[Algorithm state,
start this
noise without filtered and thetime],
current
parameter
and the backgrounddetermines the maximum
background noise is noise larger automatic
than the
Only
speed when the
ofalgorithm
the measured
MAC-c flow thatthen sends
update
RTWP threshold, is
the enabled,
background
background noise's service duration
data on the Iub WRFD- Enhanced Interval
the
noise algorithm
will not be is activated
updated. during (2) If the the
reaches
interface. this parameter, the output 010688 CELL-FACH Type 1~2000 1~2000
period
difference of [Algorithm
of new background stop time] noise to
of
(1) the auto-adaptive background
andThis
[Algorithm parameter,
start time]
the configured along
eachiswith
value day.
largerthe
In
noise update
[Algorithm stop filter
time],could be to limit
is used
other
than the periods,
RTWPthe algorithm
threshold, thefails. If
regarded
the validation as effecttime background
of the
[Algorithm
background stopnoise time] will is notless bethan WRFD- Admission Interval 0.1~40,
noise,
backgroundand thenoisecurrentautomaticvalue is
[Algorithm
updated. start time], and theupdate 020101 Control Type 1~400 step:0.1
replaced
algorithm. with the new one.
If [Algorithm stopAt the is
time]
background noise automatic update
same
greater time,
than the auto-adaptive
[Algorithm start status
algorithm is enabled, then thetime],
When
should the number of otherwise,
uplink
and thebe
algorithm
restarted;
background
is activatednoise during automatic
the
the
equivalent
output could users
not is not
be larger than
regarded as the WRFD- Admission Interval
update
period of algorithm
[Algorithm is enabled,
stop time]then each
this parameter,
effective background the RTWP noise. could be 020101 Control Type 1~6000 1~6000
the
day algorithm
to [Algorithm is activated
start time] during
of the the
regarded as background noise.
period
next day. of [Algorithm
In other periods, stop time] the to
Therefore, the measured RTWP
[Algorithm
algorithm fails start time] each day. In hour{0~23},
could be input to the auto-adaptive
other
(2) Inputperiods,
format: theHH&MM&SS
algorithm fails. If WRFD- Admission Compound min{0~59},
background noise update filter;
[Algorithm
Recommended stop time]value:isNone less than 020101 Control Type hour, min, sec sec{0~59}
otherwise, the RTWP could not be
[Algorithm start time], and the
regarded as background noise, and
background noise automatic update
should not be input to the filter, and
algorithm is enabled, then the
at the same time, the auto-adaptive WRFD- Admission Interval
algorithm is activated during the
status should be reset. 020101 Control Type 0~10 0~10
period of [Algorithm stop time] each
day to [Algorithm start time] of the
next day. In other periods, the hour{0~23},
algorithm fails. WRFD- Admission Compound min{0~59},
(2) Input format: HH&MM&SS 020101 Control Type hour, min, sec sec{0~59}
When the parameter is 'OFF', the
This parameterbackground
auto-adaptive specifies the noisetarget
transmission
update algorithm quality of DCH, that
is switched off. is,
target
Otherwise,BLER theof DCH
algorithm
This parameter specifies the intra- on the
is radio
switched WRFD- Admission Enumerati
interface
on.
frequency if measurement
the subflow is report carried on 020101 Control on Type OFF, ON OFF, ON
The difference of RTWP that trigger
DCH.
interval Thisof QoS-related
blind handover. parameter
It is
the
This update
parameter of background
is used noise.
in the If
used by
determines the CRNC to
theisintra-frequencydetermine the
the difference
algorithm larger than the
target SIRofvalue
measurement
the load for use
reporting
reshuffling
in
interval of
threshold,
(LDR) the
intra-frequency background blind will be WRFD- Admission Interval 0.1~10,
admission
Load Reshuffling and power control. To
Indicating
updated. whether(LDR) to perform blind blind 020101 Control Type 1~100 step:0.1
handover.
calculate the This parameter
value of this defines
handover. The smaller the value of
how many measurement
parameter, obtain the result reports
of intra- are
this
FALSE: parameter,
The cellthe smaller
is not in the the
needed
10*Lg(BLER) for making where the
the blind
BLER Outer Loop
frequency measurement
alternative cells for blind handover, reporting
handover
refers to and decision.
the actual The RNC
BLER, andstartsthen WRFD- Power Interval
interval,
so blind handover the smallerto this the celltimecannot for
blind
round handover
the result only
up. if the UE 020503 Control Type -63~0 5*10^(-7)~1
intra-frequency
be triggered. measurement. But
continuously reports adequate intra-
the
TRUE: greater
The the cellinfluence of signal
is in the alternative Inter
frequency measurement reports that Inter
fluctuation,
cells for blind which
handover,can result in
so blind Frequency
meet the quality requirements of Frequency
wrong
handover handover.
to this cell On might
the contrary,be WRFD- Load Enumerati FALSE,
blind handover. During the Load
the larger the value of this
triggered. 020103 Balance on Type FALSE, TRUE TRUE
measurement process, if the UE Balance
parameter, the longer the intra-
reports an unqualified measurement WRFD- Intra
frequency measurement reporting Inter
report, the process ends. And the 020103 Frequency
interval, and the less the influence Frequency
RNC does not start blind handover WRFD- Load Enumerati
of signal fluctuation, which can Load
on the target cell. 020104 Balance on Type D1, D2, D4, D8 1, 2, 4, 8
improve the possibility of successful Balance
blind handover. But if the time for WRFD- Intra
intra-frequency measurement 020103 Frequency
becomes long, the handover may WRFD- Load Enumerati
not be performed timely. 020104 Balance on Type D250, D500 250, 500
This parameter specifies the quality
threshold
Indicating forthethe eventof1F
priority reported
blind
cell to
handover.trigger blind handover. This
parameter
The value 0defines the lowest
represents quality
the highest
threshold of the emergency
priority. Priorities blind
0~15 are assigned
handover.
to concentric The blind handover
neighboring cells,is
Blind handover condition.
implemented
which can ensure only successful
if the signal 3G/2G
If the value is not -115, the
quality
handover. in the cell, which
Priorities 16~30reports
are Common
handover is defined as Conditional
event
assigned 1F, to
exceeds the specified
neighboring cells for Load
Blind HO, which is used for the
threshold. Otherwise,
blind handover, which the report will
cannot WRFD- Managemen Interval
inter-frequency neighboring cells of
be discarded.
ensure successful handover. 020310 t Type 0~30 0~30
the same coverage.
This parameter is set to raise the
If the value is -115, the handover is Inter
possibility of successful blind
defined as Direct Blind HO, which is Frequency
handover. If the signal quality in the
used for the inter-frequency WRFD- Load Interval
cells that report event 1F are all very Inter
neighboring cells of larger coverage. 020103 Balance Type -115~-25 -115~-25
poor, this indicates that the user is Frequency
located at the edge of coverage Hard
area. Under this condition, if the Handover
blind handover is initiated rashly, the WRFD- Based on Interval
possibility of call drop increases. 020302 Coverage Type -115~-25 -115~-25
DISABLE(Disabl
Faulty e),
Base Station Controller alarm blink MRFD- Managemen Enumerati ENABLE(Enable DISABLE,
Alarm blink filter threshold. When
filter switch 210304 t on Type ) ENABLE
the interval between the generation
and clearance of an alarm is equal
to or smaller than the alarm blink Faulty
filter threshold, the alarm is filtered MRFD- Managemen Interval
and not reported to the NMS. 210304 t Type 0~65534 0~65534
Faulty
Measurement period of filtered Base MRFD- Managemen Interval
Station Controller alarms 210304 t Type 60~65534 60~65534
DISABLE(Disabl
Switch controlling whether to Faulty e),
Whether to use the
perform statistics of device IP
Base Station MRFD- Managemen Enumerati ENABLE(Enable DISABLE,
Dynamic
address
Controllerasalarms
the local IP address. 210304 t on Type ) ENABLE
AAL2
When this parameter is set to
This timer is started when an AAL2 Connections
"YES", the device IP address is
signaling entity sends the peer node in
used as the local IP address of the
a request for blocking an AAL2 WRFD- Iub/IuCS/Iur Interval
PPP link. When this parameter is
path. 05030104 Interface Type 2000~60000 2000~60000
set to "NO", the device IP address is
not used as the local IP address of
the PPP link. In this case, you need
to reconfigure the local IP address Enumerati NO(NO),
of the PPP link. None None on Type YES(YES) NO, YES
Faulty nonrpt(Not
Whether to report the alarm to the MRFD- Managemen Enumerati Report),
alarm box 210304 t on Type rpt(Report) nonrpt, rpt
Configuratio
n
Classes of boards classified MRFD- Managemen Enumerati SCU, GCU, SCU, GCU,
according to function modules 210301 t on Type XPU, INT XPU, INT
Configuratio
n SCU, GCU,
Classes of boards classified MRFD- Managemen Enumerati SCU, GCU, XPU, DPU,
according to function modules 210301 t on Type XPU, DPU, INT INT
PEUa, AEUa, PEUa, AEUa,
FG2a, GOUa, FG2a, GOUa,
Configuratio
AOUa, POUa, AOUa, POUa,
n INT, DPU,
Base Station Identity Code (BSIC) UOIa, AOUc, UOIa, AOUc,
Classes of boards classified MRFD- Managemen Enumerati INT, DPU, XPU, XPU, OMU,
verification switch. POUc, UOIc, POUc, UOIc,
according to function modules 210301 t on Type OMU, SAU SAU
1. BSIC(Base Station Identity FG2c, GOUc, FG2c, GOUc,
Code): identity code of the base Configuratio SPUa, SPUb, SPUa, SPUb,
station. n DPUb, DPUe, DPUb, DPUe,
2. This parameter is used to control MRFD- Managemen Enumerati OMUa, OMUb, OMUa,
Type of the inter-RAT
cells where board measurement 210301 t on Type SAUa OMUb, SAUa
reports are triggered. When the
value is REQUIRED, the
measurement report is triggered Enumerati FG2a, GOUa, FG2a, GOUa,
after
Boardthe BSIC of the measured cell
type None None on Type FG2c, GOUc FG2c, GOUc
is deciphered correctly; when the
value is NOT_REQUIRE,
measurement reporting is triggered
whatever the BSIC is deciphered or Enumerati PEUa, POUa, PEUa, POUa,
Board typemeasured cell meets the
not, if the None None on Type UOIa, POUc UOIa, POUc
reporting conditions. This parameter
is valid for both periodical report Inter-RAT
mode and event report mode. To Handover Enumerati PEUa, POUa, PEUa, POUa,
Backup mode of the log. If
ensure
Board typethe reliability of handovers, None Based
None on on Type POUc POUc
"ENTIRE" is selected, all logs in the ENTIRE(Entire
the system reports only the cells of Coverage
current database are backed up. If Backup),
which the BSIC is correctly Inter-RAT
"INCREMENTAL" is selected, the Security INCREMENTAL( ENTIRE,
decoded, that is, the recommended Handover
logs generated after last backup are MRFD- Managemen Enumerati Incremental INCREMENT
value of the parameter is WRFD- Based on
backed up. 210305 t on Type Backup) AL
REQUIRED. If the parameter is set 020303 Service REQUIRED(Veri
to NOT_REQUIRED, handovers WRFD- Inter-RAT fy mode),
occur more easily, the setting of 020305 Handover NOT_REQUIRE REQUIRED,
REQUIRED is of higher reliability for WRFD- Based on Enumerati (Non-verify NOT_REQUI
the handovers, though. 020306 Load on Type mode) RE
System
MRFD- Redundanc Enumerati
Type of the board. 210101 y on Type SCUa, GCUa,
XPU SCUa,
XPU GCUa,
GCGa, PEUa, GCGa, PEUa,
AEUa, PEUa, AEUa, PEUa,
AEUa, FG2a, AEUa, FG2a,
AOUa, POUa, AOUa, POUa,
GOUa, AOUa, GOUa,
MRFD- BSC/RNC Enumerati UOIa, AOUc, SCUa, GCUa,
UOIa, AOUc,
POUa, UOIa, AOUa, POUa,
Type of the board 210502 Clock on Type SCUa,
POUc, GCUa,
UOIc GCGa, PEUa,
POUc, UOIc
AOUc, POUc, UOIa, AOUc,
GCGa, PEUa, AEUa, FG2a,
BSC/RNC UOIc, FG2c, POUc, UOIc,
AEUa, FG2a, GOUa,
Software GOUc, SPUa, FG2c, GOUc,
GOUa, AOUa, AOUa, POUa,
MRFD- Managemen Enumerati SPUb, DPUb, SPUa, SPUb,
POUa, UOIa, UOIa, AOUc,
Type of the board 210401 t on Type DPUe DPUb, DPUe
AOUc, POUc, POUc, UOIc,
BSC/RNC UOIc, FG2c, FG2c, GOUc,
Software GOUc, SPUa, SPUa, SPUb,
MRFD- Managemen Enumerati SPUb, DPUb, DPUb, DPUe,
Type of the board 210401 t on Type DPUe, ALL ALL
Interval
IMA group number None None Type 0~167 0~167
Interval
IMA group number of the logical port None None Type 0~167 0~167
When the NCP/CCP is based on
ATM, set Bearing link type to SAAL. SAAL(SAAL
When the NCP/CCP is based on IP, Link Type ),
set Bearing link type to SCTP. SCTP(SCTP
When the NCP/CCP is based on ATM Link Type),
ATM/IP, set Bearing link type to Transmissio SAAL-
SAAL-SCTP. For detailed n SCTP(SAAL-
information of this parameter, refer WRFD- Introduction Enumerati SCTP Link SAAL, SCTP,
Permanent
to 3GPP TS 25.430. 050301 Package on Type Tpye) SAAL-SCTP
AAL5
Number of the NCOPT port that Connections
carries the SAAL link. The for Control
parameter is valid only when the WRFD- Plane Interval
Dynamic
bearer type is set to NCOPT. 05030105 Traffic Type 0~7 0~7
AAL2
Number of the NCOPT port that Connections
carries the path. This field is valid in
only when the " bearer type " WRFD- Iub/IuCS/Iur Interval
parameter is set to NCOPT. 05030104 Interface Type 0~7 0~7
IP Re-route
WRFD- Based on Enumerati ETHPORT, ETHPORT,
Permanent
Port type of the SBFD/ARP bearer 050421 BFD/ARP on Type TRUNK TRUNK
AAL5
Connections
Number of the bearer UNI link. The for Control
parameter is valid only when the WRFD- Plane Interval
Dynamic
bearer type is set to UNI. 05030105 Traffic Type 0~335 0~335
Number of the UNI link that carries AAL2
the PATH. The field is value only Connections
when the " bearer type " parameter in
is set to UNI. The bearing UNI link WRFD- Iub/IuCS/Iur Interval
must be configured already. 05030104 Interface Type 0~335 0~335
Interval
UNI link number None None Type 0~335 0~335
Interval
Permanent
UNI link number None None Type 0~335 0~335
AAL5
Connections
for Control
VCI value of the SAAL out WRFD- Plane Interval
BSC6900 05030105 Traffic Type 32~65535 32~65535
Cell
IP address of the CBC (Cell WRFD- Broadcast IP Address 0.0.0.0~255.2
Broadcast Center) 011000 Service Type None 55.255.255
Cell
Mask of the sub-network of the CBC WRFD- Broadcast IP Address 0.0.0.0~255.2
IP address 011000 Service Type None 55.255.255
Interval
CPU usage threshold for Cell
Maximum burst size (MBS) None None Type 4500~32767 4500~32767
Broadcast Service (CBS) flow
control. When the average CPU
usage of sliding windows reaches or
exceeds the threshold, CBS flow WRFD- Flow Interval
Packet queue usage threshold for
control is triggered. 040100 Control Type 30~100 30~100
CBS flow control. When the average
packet queue usage of sliding
windows reaches or exceeds the
threshold, CBS flow control is WRFD- Flow Interval
triggered. 040100 Control Type 30~100 30~100
Cell
WRFD- Broadcast Interval
A CBS Operator of the cell. 011000 Service Type 0~3 0~3
CPU usage threshold for recovery
from CBS flow control. When the
average CPU usage of sliding
windows is lower than the threshold, WRFD- Flow Interval
Packet queue usage threshold for
CBS flow control is stopped. 040100 Control Type 30~100 30~100
recovery from CBS flow control.
When the average packet queue
usage of sliding windows is lower
than the threshold, CBS flow control WRFD- Flow Interval
is stopped. 040100 Control Type 30~100 30~100
Cell
Together with PLMN code and LAC, WRFD- Broadcast Interval
uniquely corresponding to a cell. 011000 Service Type 0~65535 0~65535
Cell
CBS service area which the cell WRFD- Broadcast Interval
belongs to. 011000 Service Type 0~65535 0~65535
Interval
Tolerable delay jitter None None Type 1024~212000 1024~212000
Intra RNC
WRFD- Softer Interval
Uniquely identifying a cell. 020202 Handover Type 0~65535 0~65535
Inter RNC
Uniquely identifying a neighboring WRFD- Soft Interval
RNC cell. 020203 Handover Type 0~65535 0~65535
Inter-RAT
Uniquely identifying a WCDMA cell, Handover
to which neighboring GSM cells can WRFD- Based on Interval
be added. 020303 Coverage Type 0~65535 0~65535
Security
NOT_REQUIRE
MRFD- Managemen String 0~200
(Not configure
Name of the certificate chain file 210305 t Type None characters
RAC
This parameter identifies whether to SRNS information),
configure RAC. If the RNC supports Relocation REQUIRE(Confi NOT_REQUI
the PS domain, this parameter must WRFD- Introduction Enumerati gure RAC RE,
be set to REQUIRE. 020605 Package on Type information) REQUIRE
algorithm for IPv6 is used at the 010686 Two PS CFG_LOSSLES _CFG_SWIT
RNC. WRFD- Services S_RELOC_CFG CH,
11) 010687 Combinatio _SWITCH,
G_0~0 G_1~1 CFG_MULTI_
CFG_PDCP_RFC2507_HC_SWITC WRFD- n of Three CFG_MULTI_R
G_2~2 G_3~3 RAB_SWITC
H: When the switch is on and the 010615 PS Services AB_SWITCH,
G_4~4 G_5~5 H,
PDCP IPHC license is activated, the WRFD- Combinatio CFG_PDCP_IP
G_6~6 G_7~7 CFG_PDCP_I
This parameter indicates whether
PDCP IPHC header compression 01061501 n of One CS V6_HEAD_COM
G_8~8 G_9~9 PV6_HEAD_
RAC is configured. If the RNC
algorithm is used for the RNC. WRFD- Service and PRESS_SWITC
G_10~10 COMPRESS_
supports the PS domain, the value 3GPP NOT_REQUI
12) 01061502 Three PS H, SWITCH,
of this parameter must be WRFD- Enumerati G_11~11
Specificatio NOT_REQUIRE, RE,
CFG_PDCP_RFC3095_HC_SWITC WRFD- Services CFG_PDCP_RF
G_12~12 CFG_PDCP_
REQUIRE. 010101 ns on Type REQUIRE REQUIRE
H: When the switch is on and the 01061503 PDCP C2507_HC_SWI
G_13~13 RFC2507_HC
PDCP ROHC license is activated, WRFD- Header TCH,
G_14~14 _SWITCH,
the PDCP ROHC header 01061504 Compressio CFG_PDCP_RF
G_15~15 CFG_PDCP_
G_0, G_1,
compression algorithm is used for WRFD- n Bit Field C3095_HC_SWI
G_16~16 RFC3095_HC
G_2, G_3,
the RNC. 011500 (RFC2507) Type TCH
G_17~17 _SWITCH
G_4, G_5,
G_15, G_16, G_15, G_16,
G_18~18 G_6, G_7,
G_17, G_18, G_17, G_18,
Confirm password. The confirm Security G_19~19 G_8, G_9,
G_19, G_20, G_19, G_20,
password is required to ensure that MRFD- Managemen Password G_20~20 G_10,
1~32 G_11,
G_21, G_22, G_21, G_22,
a correct password is entered. 210305 t Type G_21~21
None G_12, G_13,
characters
G_23, G_24, G_23, G_24,
G_22~22 G_14, G_15,
G_25, G_26, G_25, G_26,
G_23~23 G_16, G_17,
Security G_27, G_28, G_27, G_28,
G_24~24 G_18, G_19,
Customized command group to be MRFD- Managemen Enumerati G_29, G_30, G_29, G_30,
G_25~25 G_20, G_21,
processed 210305 t on Type G_31 G_31
G_26~26 G_22, G_23,
G_27~27 G_24, G_25,
This parameter is valid only when Security G_28~28 G_26, G_27,
This parameter
the operator specifies
belongs thecustom
to the value MRFD- Managemen Bit Field G_29~29 G_28, G_29,
of the handover protection timer. If
level. 210305 t Type G_30~30 G_31 G_30, G_31
services can be set up on channels
based on a higher technique after
Security
channel handover is completed, the
Name of the command group. You MRFD- Managemen String 1~32
handover protection timer will be
can define the name. 210305 t Type None characters
started. When the timer expires, the Dynamic
RNC will try to carry services on Channel
channels based on a higher Configuratio
technique. Channel retry cannot be WRFD- n Control Interval
This parameter specifies the value
performed before this timer expires. 021101 (DCCC) Type 0~999 0~999
of the channel retry timer. The timer Dynamic
will start after traffic is set up or Channel
reconfigured, if higher technique is Configuratio
available. Channel retry will be WRFD- n Control Interval
performed after this timer expires. 021101 (DCCC) Type 0~180 0~180
The coding type of a transport Transport NO_CODING,
channel.For detailed information of Channel NO_CODING, CONVOLUTI
this parameter, refer to 3GPP TS WRFD- Managemen Enumerati CONVOLUTION ONAL,
IP
25.212. 021000 t on Type AL, TURBO TURBO
Transmissio
n
Number of ping check timeouts. The Introduction
parameter indicates the number of WRFD- on Iub Interval
timeout record failures. 050402 Interface Type 1~5 1~5
MBMS CH0(Channel 0),
Channel CH1(Channel 1),
Audience CH2(Channel 2), CH0, CH1,
WRFD- Rating Enumerati CH3(Channel 3), CH2, CH3,
MBMS performance channel index. 010665 Statistics on Type CH4(Channel 4) CH4
Interval 64~100000,
Bandwidth of the logical port None None Type 1~1562 step:64
H_RB_MOD_SWITCH: When the RECOVERY:5E- E6,
WALKING_S
switch is on, channel transition is in 5), ERR_PFM_1
PEED_AND_
the same procedure as the change ERR_PFM_1E4( E5,
HOT_SPOT_
of the serving cell. When the switch RECOVERY:1E- ERR_PFM_5
CELL,
is not on, the serving cell is changed 4), E5,
MID_SPEED
after the UE performs channel ERR_PFM_5E4( ERR_PFM_1
_AND_HOT_
CMCF
transition algorithm switch.
and delivers RECOVERY:5E- E4,
WALKING_SPE SPOT_CELL,
1) CMCF_DL_HLS_SWITCH:
reconfiguration of physical channels. When 4), ERR_PFM_5
CMP_IU_IMS
ED_AND_HOT_ HIGH_SPEE
the switch is on, the compressed
10) ERR_PFM_1E3( E4,
_PROC_AS_
SPOT_CELL, D_AND_HOT
mode supports DL higher-layer
CMP_UU_VOIP_UP_PROC_AS_N Enumerati RECOVERY:1E- ERR_PFM_1
NORMAL_PS
MID_SPEED_A _SPOT_CEL
scheduling.
Error clear threshold. By default,
ORMAL_PS_SWITCH: None None on Type 3) E3
_SWITCH,
ND_HOT_SPOT L,
2)
theCMCF_UL_HLS_SWITCH:
switch is on. In this case, the When CMP_IU_SY
_CELL, LOW_SPEED
the switch is on, the compressed
Alternative E-bit is not configured for SHOIN_CMP
HIGH_SPEED_ _AND_MEDI
mode supports UL higher-layer
L2. CMP_IU_IMS_P _IUUP_FIXT
MRFD- BSC/RNC Enumerati AND_HOT_SPO UM_COVERA
scheduling.
11) ROC_AS_NOR O1_SWITCH,
Type of the clock board 210502 Clock on Type T_CELL,
GCUa, GCGa GE_CELL,
GCUa, GCGa
3)
CMP_UU_FDPCH_COMPAT_SWIT MAL_PS_SWIT CMP_IUR_H2
LOW_SPEED_A HIGH_SPEE
CMCF_UL_PRECFG_TOLERANCE
Whether
CH: When the alarm
the switchto is
beOFF,
queried is
if the CH, D_FOR_LOW
ND_MEDIUM_C D_AND_MED
_SWITCH:
This
cleared. parameter When the
specifiesswitch
information element that indicatesor
You can select the is on,
startup
"cleared" Faulty CMP_IU_SYSH R5_NRNCCE
OVERAGE_CEL IUM_COVER
the
the compressed
direction
"uncleared",
F-DPCH mode
of compressed
or both
capability ofmode
of of the exists
them.
UE UE
By in
that MRFD- Managemen Bit Field cleared,
OIN_CMP_IUUP cleared,
LL_SWITCH,
L, AGE_CELL,
the
default,
in thecompressed
NodeB both
message modeare
supports.
of them pre-
selected. 210304 Inter
t Type uncleared
_FIXTO1_SWIT uncleared
CMP_IUR_S
HIGH_SPEED_ LOW_SPEED
configuration
-"RRC_CONNECT_REQ"
UL_ONLY: The stateNodeB
can besupports
ordifferent Frequency CH, HO_DIVCTRL
Physical AND_MEDIUM_ _AND_HIGH_
from that
activation required
of by
compressed
"RRC_CONNECT_SETUP_CMP", current
mode traffic.
only Hard CMP_IUR_H2D _SWITCH,
Indicating whether the Closed loop Channel COVERAGE_C COVERAGE_
4)
in
the the uplink.
F-DPCH capability Handover
time adjust mode
CMCF_WITHOUT_UE_CAP_REPO in thedepends
cell is on WRFD- Managemen Enumerati _FOR_LOWR5_
ELL, CMP_UU_AM
CELL,
TRUE,
- DL_ONLY:
that indicator.The NodeB
In other supports
case, it Based on NRNCCELL_S R_SID_MUST
supported. 022000 Inter-RAT
t on Type LOW_SPEED_A
TRUE, FALSE HIGH_SPEE
FALSE
RT_SWITCH:
activation
means UEofdoes When
compressed the RNC
not support mode F-starts
only Coverage WITCH, _CFG_SWIT
Handover ND_HIGH_COV D_AND_HIG
inter-frequency
in the downlink. or inter-RAT
DPCH. When the switch is ON, if WRFD- Inter-RAT CMP_IUR_SHO UL_ONLY,
CH,
Based on ERAGE_CELL, H_COVERAG
measurement,
-the
UL_DL_BOTH: theTheRNC checks the
NodeB 020302 Handover UL_ONLY, CMCF_DL_H
DL_ONLY,
CM information
type of the cell. element that Coverage _DIVCTRL_SWI
HIGH_SPEED_ CMP_UU_DS
E_CELL,
information
supports of whether
activation of
indicates the F-DPCH capability of the
compressed WRFD- Based on Bit Field DL_ONLY,
TCH, LS_SWITCH,
UL_DL_BOT
T_SERV_CE
Inter AND_HIGH_CO PICO_NODE
compressed
mode
UE in boththe mode
uplink isand
required
downlink.for 020303 Inter
Coverage Type CMCF_DL_HLS
UL_DL_BOTH CMCF_UL_H
H
Theexists
CMCFinparameters message are Frequency CMP_UU_AMR
VERAGE_CELL, LL_D2E_SWI
B_TYPE_CO
measurement
"RRC_CONNECT_REQ" on the frequencyor Frequency _SWITCH,
_SID_MUST_CF LS_SWITCH,
TCH,
configured on the basis of the CM WRFD- Hard PICO_NODEB_ VERAGE_CE
band of the cells in measurement
"RRC_CONNECT_SETUP_CMP", Hard CMCF_UL_HLS
G_SWITCH, CMCF_UL_P
CMP_UU_IG
type of the cell. After that, the cell 020303 Handover TYPE_COVERA LL,
list.
the The information should be on Handover _SWITCH, RECFG_TOL
can F-DPCH
specify the capability
numberdepends
of CM WRFD- Based on Enumerati CMP_UU_DST_
GE_CELL, NORE_UE_R
OTHER_CEL
reported
that by the UE in RRC connect
indicator. If that information Based on CMCF_UL_PRE
SERV_CELL_D ERANCE_SW
LC_CAP_SW
sequences. 020302 Coverage on Type OTHER_CELL L
setup complete
element does not message.
exist, UEWhen supports the Coverage CFG_TOLERAN
2E_SWITCH, ITCH,
ITCH,
switch
F-DPCH is when
on andallno the such information
conditions WRFD- Inter-RAT CE_SWITCH,
CMP_UU_IGNO CMCF_WITH
CMP_UU_SE
has
meets:been a) reported,
the version theofRNC
UE isstarts 020302 Handover CMCF_WITHOU
RE_UE_RLC_C OUT_UE_CA
RV_CELL_C
the compressed mode
Release 6. b) UE supports HS- and then WRFD- Based on Bit Field T_UE_CAP_RE
AP_SWITCH, P_REPORT_
HG_WITH_A
delivers
PDSCH. the measurement. 020303 Coverage Type PORT_SWITCH
CMP_UU_SERV SWITCH
SU_SWITCH,
A timer to RNC wait for the
12)
response to common transport _CELL_CHG_W CMP_UU_SE
CMP_UU_AMR_DRD_HHO_COMP
channel resources request in the Iur 3GPP ITH_ASU_SWIT RV_CELL_C
AT_SWITCH:
common transport When the switch is
channel WRFD- Specificatio Interval CH, HG_WITH_R
on, When SRB is set up on DCH,
procedure. 010101 ns Type CMP_UU_SERV
1~10000 B_MOD_SWI
1~10000
and RNC decides to setup the AMR _CELL_CHG_W TCH,
through DRD procedure, RNC will ITH_RB_MOD_ CMP_UU_VO
Name
execute ofblind
the command
handover to to be
the target Security SWITCH, IP_UP_PRO
queried. You can select
cell, and then setup the AMR one orRBs more MRFD- Managemen String CMP_UU_VOIP 1~200
C_AS_NORM
commands.
on the target cell. 210305 t Type None
_UP_PROC_AS characters
AL_PS_SWIT
13) _NORMAL_PS_ CH,
CMP_IU_QOS_ASYMMETRY_IND Security SWITCH, CMP_UU_FD
_COMPAT_SWITCH:
You can select one or When more the Iu MRFD- Managemen String CMP_UU_FDPC PCH_COMPA
0~128
QoS Negotiation function is active
commands. 210305 t Type H_COMPAT_S
None T_SWITCH,
characters
and the switch is on, IE RAB WITCH, CMP_UU_AM
Asymmetry Indicator is Symmetric CMP_UU_AMR R_DRD_HHO
bidirectional, The uplink and _DRD_HHO_C _COMPAT_S
Sequence number of the command Interval
downlink RNC negotiation rate is OMPAT_SWITC WITCH,
string of the scheduled subtask. None None Type 0~19 0~19
asymmetric, RNC select the bigger H, CMP_IU_QO
rete as Iu QoS negotiation rate. CMP_IU_QOS_ S_ASYMMET
When the switch is OFF, RNC ASYMMETRY_I RY_IND_CO
select the less rate as Iu QoS Bit Field ND_COMPAT_S MPAT_SWIT
negotiation rate. None None Type WITCH CH
Configuratio
n
MRFD- Managemen Interval
Number of the cabinet 210301 t Type 1~3 1~3
3GPP
This parameter specifies whether
WRFD- Specificatio Enumerati CS_DOMAIN, CS_DOMAIN,
the service is a CS service or PS 3.4/6.8/13.6
Identifies the type of a CN. 010101 ns on Type PS_DOMAIN PS_DOMAIN
service.
Status of a CN node. The status /27.2 kbit/s
-needs
CS_DOMAIN: Circuit Switched
to be negotiated with the CN RRC
domain service
and is configured through the MML Connection
-command.
PS_DOMAIN:A CNPacket Switched
node can be WRFD- and RAB Enumerati CS_DOMAIN, CS_DOMAIN,
domain service
configured with the following status: 010510 Assignment on Type PS_DOMAIN PS_DOMAIN
1. Normal: This value indicates that
the UE can access the CN node
normally. WRFD- Admission Enumerati CS_DOMAIN, CS_DOMAIN,
2. Offload: the
Identifying If the UEofcarries
type a CN. 020101 Control on Type PS_DOMAIN PS_DOMAIN
"NullNRI" in the initial direct
transmission message, the UE
3GPP
cannot access the CN node. If the
WRFD- Specificatio Interval
UE carries NullNRI in the initial
Identifies a CN node 010101 ns Type 0~4095 0~4095
direct transmission message, the
UE can access the CN node. Iu Flex Load
3. Inhibited: This value indicates Distribution NORMAL, NORMAL,
that the UE cannot access the CN WRFD- Managemen Enumerati OFFLOAD, OFFLOAD,
Resource management mode.
node normally. 021306 t on Type INHIBITED INHIBITED
When the interface type is IUB, the
value can be set to SHARE or SHARE(SHARE
EXCLUSIVE. When the interface RAN ),
type is IUR, IUCS, or IUPS, the WRFD- Sharing Enumerati EXCLUSIVE(EX SHARE,
value can be set to SHARE only. 021305 Phase 2 on Type CLUSIVE) EXCLUSIVE
License
MRFD- Managemen Interval
Index of the operator 210403 t Type 0~3 0~3
RAN
Interval
Sharing
operator index. None None Type 0~3 0~3
Introduction
WRFD- Package
021304 MOCN
WRFD- Introduction String 1~31
Cn operator name. 021311 Package Type None characters
MOCN
WRFD- Introduction Interval
Identifies an operator group. 021311 Package Type 0~31 0~31
MOCN
WRFD- Introduction String 1~31
Name of the CN operator group. 021311 Package Type None characters
RAN
RAN
Operator index of the resource WRFD- Sharing Interval
Sharing
group 021305 Phase 2 Type 0~3 0~3
Introduction
WRFD- Package
021304 MOCN
WRFD- Introduction Interval
Indicates a CN operator. 021311 Package Type 0~3 0~3
Shared
Network
Support in
WRFD- Connected Interval
Cn Operator index. 021301 Mode Type 0~3,5~31 0~3, 5~31
Domain
Specific
Access
Specifies the index of the telecom WRFD- Control Interval
operator. 020114 (DSAC) Type 0~3 0~3
RAN
Interval
Sharing
Index of the operator None None Type 0~3 0~3
Introduction
WRFD- Package
021304 MOCN
RAN
WRFD- Introduction Interval
Sharing
Identifies a CN operator. 021311 Package Type 0~3,5~31 0~3, 5~31
Introduction
WRFD- Package
021304 MOCN
RAN
WRFD- Introduction Interval
Sharing
Identifies a CN operator. 021311 Package Type 0~3,5~31 0~3, 5~31
Introduction
WRFD- Package
021304 MOCN
RAN
WRFD- Introduction Interval
Sharing
Identifies a CN operator. 021311 Package Type 0~3,5~31 0~3, 5~31
Introduction
WRFD- Package
021304 MOCN
WRFD- Introduction Interval
Identifies a CN operator. 021311 Package Type 0~3,5~31 0~3, 5~31
MOCN
WRFD- Introduction Interval
Identifies a common operator. 021311 Package Type 5~31,255 5~31, 255
RAN
Sharing
Introduction
WRFD- Package ONE(One),
021304 MOCN TWO(Two),
Number of operators in an operator WRFD- Introduction Enumerati THREE(Three),
group 021311 Package on Type FOUR(Four) 1, 2, 3, 4
3GPP
Protocol version supported by the WRFD- Specificatio Enumerati R99, R4, R5, R99, R4, R5,
CN. 010101 ns on Type R6, R7 R6, R7
Interval
Transmitted packets None None Type 1~28 1~28
Security NOLIMIT(No
Whether to limit the operation date MRFD- Managemen Enumerati Limit), NOLIMIT,
of the operator 210305 t on Type LIMIT(Limit) LIMIT
Security
MRFD- Managemen String 1~110
Description of the operator account 210305 t Type None characters
IP Address 0.0.0.0~255.2
Destination IP address None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Destination IP address None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Destination IP address None None Type None 55.255.255
3GPP
A timer to DRNC wait for AAL2 WRFD- Specificatio Interval
setup indication. 010101 ns Type 1~10000 1~10000
Faulty
Number of the DSP where the alarm MRFD- Managemen Interval
is generated 210304 t Type 0~21 0~21
Interval
DSP number None None Type 0~27 0~27
Configuratio
n
MRFD- Managemen Enumerati NO(NO),
Whether daylight saving time starts 210301 t on Type YES(YES) YES, NO
IP Address 0.0.0.0~255.2
Destination IP address None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Subnet mask None None Type None 55.255.255
TS3, TS4,
TS1, TS2, TS3, TS5, TS6,
TS4, TS5, TS6, TS7, TS8,
TS7, TS8, TS9, TS9, TS10,
TS10, TS11, TS11, TS12,
TS12, TS13, TS13, TS14,
TS14, TS15, TS15, TS16,
TS16, TS17, TS17, TS18,
TS18, TS19, TS19, TS20,
Interval
TS20, TS21, TS21, TS22,
Destination of timeslot cross None None Type 0~335 0~335
TS22, TS23, TS23, TS24,
TS24, TS25, TS25, TS26,
TS26, TS27, TS27, TS28,
Bit Field TS28, TS29, TS29, TS30,
Target timeslot mask None None Type TS30, TS31 TS31
This parameter specifies the size of
pattern 1 transmitted on the UL
DPCCH . For details, refer to the WRFD- CPC - DTX / Enumerati D1, D4, D5, D8, 1, 4, 5, 8, 10,
3GPP TS 25.214 protocol. 010686 DRX on Type D10, D16, D20 16, 20
D4, D5, D8,
This parameter specifies the size of D10, D16, D20, 4, 5, 8, 10,
pattern 2 transmitted on the UL D32, D40, D64, 16, 20, 32,
DPCCH . For details, refer to the WRFD- CPC - DTX / Enumerati D80, D128, 40, 64, 80,
3GPP TS 25.214 protocol. 010686 DRX on Type D160 128, 160
If the interval at which two
This parameter specifies the delay
consecutive patterns are transmitted
time for DTX DRX being effective D0, D1, D2, D4, 0, 1, 2, 4, 8,
on the UL DPCCH is DtxCycle2, a
after it is enabled. For details, see WRFD- CPC - DTX / Enumerati D8, D16, D32, 16, 32, 64,
certain number of timeslots should
3GPP TS 25.331. 010686 DRX on Type D64, D128 128
be transmitted before data is
transmitted on the DPCCH. This
parameter specifies the number of
This parameter specifies whether
timeslots. For details, refer to the WRFD- CPC - DTX / Enumerati
the parameters related to the DTX
3GPP TS 25.214 protocol. 010686 DRX on Type D2, D4, D15 2, 4, 15
are valid. Value OFF indicates that
the parameters are invalid and
DTX_DRX cannot be configured.
Value ON indicates that the WRFD- CPC - DTX / Enumerati
parameters are valid. 010686 DRX on Type ON, OFF ON, OFF
When the cell is automatically shut
down, this parameter is used to Multi-Carrier
repeatedly determine whether the Switch off
cell needs to be automatically WRFD- Based on Interval
enabled. 020117 Traffic Load Type 1~3600 1~3600
When the cell is automatically Multi-Carrier
enabled, the cell can be Switch off
automatically disabled again only WRFD- Based on Interval
When the switch is on, the Cell
after a period delay. 020117 Traffic Load Type 60~3600 60~3600
dynamic shutdown algorithm of the
local RNC cell is enabled. When the Multi-Carrier
switch is off, the Cell dynamic Switch off
OFF(switch off),
shutdown algorithm of the local WRFD- Based on Enumerati OFF(switch off),
ON_1(switch
RNC cell is disabled. 020117 Traffic Load on Type ON(switch on) OFF, ON
on1),
Multi-Carrier ON_2(switch
Switch off on2),
When DynShutDownType is FORCESHUTD
When the switch is on, the "Cell WRFD- Based on Enumerati ON_3(switch OFF, ON_1,
ForceShutDown,the cell will be shut OWN(ForceShut
dynamic shutdown" feature is valid. 020117 Traffic Load on Type on3) ON_2, ON_3
down in the shutdown time interval. Down), FORCESHUT
When DynShutDownType is Multi-Carrier CONDITIONALS DOWN,
ConditionalShutDown, the cell will Switch off HUTDOWN(Con CONDITIONA
be shut down with some conditions WRFD- Based on Enumerati ditionalShutDow LSHUTDOW
in the shutdown time interval. 020117 Traffic Load on Type n) N
Fractional
ATM
WRFD- Function on Interval 0~31(AEUa),
Number of the bearing port 050302 Iub Interface Type 0~335 0~335(AOUc)
ATM over
Period of E-DCH throughput ratio
Channelized
measurement. This parameter
STM-1/OC-
specifies the period of E-DCH
WRFD- 3 on Iub Interval
throughput ratio measurement. The
E1/T1 port number 05030102 Interface Type 0~83 0~83
throughput ratio over the E-DCH is
Number of pending periods after the
periodically measured to implement
throughput event 4B for state UE State in
state transition from E-DCH to
transition from E-DCH to FACH is Connected
FACH and DCCC algorithm on WRFD- HSUPA Interval 10~100000,
triggered. This parameter is used to Mode
EDCH.
Number of periods before the events 01061208 DCCC Type 1~10000 step: 10
prevent too many throughput (CELL-
throughput ratio event
4B being reported. 4B fortime
Pending state DCH, CELL-
transition from E-DCH
after the throughput to FACH
event 4B is is PCH, URA-
This parameter is used to check
triggered.
triggered =When
valuethe throughput
of this parameterratio
x WRFD- PCH, CELL- Interval
whether the UE in the low activity
is
10below
ms. the lower threshold and 010202 FACH) Type 0~1023 0~1023
state. If the UE is on the E-DCH
remains so for the period specified
channel, the low activity counter
by this parameter, the event 4B is UE State in
increases by 1 every time
reported. This parameter prevents Connected
throughput ratio event 4B is WRFD- HSUPA Interval
unnecessary throughput ratio Mode
reported. 01061208 DCCC Type 0~384 0~384
events that are caused by (CELL-
throughput ratio instability from DCH, CELL-
being triggered. Time to trigger the PCH, URA-
throughput ratio event 4B = value of WRFD- PCH, CELL- Interval
The parameter specifies the number
this parameter x 10 ms. 010202 FACH) Type 0~1023 0~1023
of codes (SF=256) used by the E-
DCH Absolute Grant Channel (E-
AGCH). For details about this HSUPA
Peer IP address to be checked. The
parameter, refer to 3GPP TS WRFD- Introduction Interval
input address (CHKIPADDR) must IP
25.433. 010612 Package Type 1~8 1~8
be the address (regardless of the Transmissio
network segment address or host n
address of the peer address) in the Introduction
network segment specified by the WRFD- on Iub IP Address 0.0.0.0~255.2
(PEERIPADDR, PEERMASK). 050402 Interface Type None 55.255.255
Faulty
End serial number of the alarm MRFD- Managemen Interval 1~214748364
record 210304 t Type 1~2147483646 6
Faulty
End date of the alarm record. By MRFD- Managemen Compound 2000-1-
default, the end date is 2037-12-31. 210304 t Type year, month, day 1~2037-12-31
Faulty
End date of the alarm record. By MRFD- Managemen Compound 2000-1-
default, the end date is 2037-12-31. 210304 t Type year, month, day 1~2037-12-31
Configuratio
n
MRFD- Managemen Interval
End date of the daylight saving time 210301 t Type 1~31 1~31
This parameter specifies the first
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the tenth
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the
eleventh MAC-d PDU size used by HSUPA
HSUPA services. The size must be WRFD- Introduction Interval
a multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the twelfth
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the second
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the third
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the fourth
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the fifth
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the sixth
MAC-d PDU size used by HSUPA HSUPA
services. The size must be a WRFD- Introduction Interval
multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the
seventh MAC-d PDU size used by HSUPA
HSUPA services. The size must be WRFD- Introduction Interval
a multiple of 8 bits. 010612 Package Type 1~5000 1~5000
This parameter specifies the eighth
MAC-d PDU size used by HSUPA HSUPA
services. The size
This parameter must be
specifies thea WRFD- Introduction Interval
multiple of 8 bits.
number of measurement periods 010612 Package Type 1~5000 1~5000
during which nospecifies
This parameter event 4Atherelated
ninthto
This parameter specifies the
E-DCH
MAC-d PDUthroughput
size usedis reported
by HSUPAagain HSUPA
number of E-DCH MAC-d PDU
after suchThe
services. an event
size 4A isbe
must reported.
a WRFD- Introduction Interval
This parameter
sizes. Currently,specifies
only PS the
This parameter
multiple 8 bits.is set to avoid too
of measurement 010612 Package Type 1~5000 1~5000
number of
conversational services canperiods
be
many channel reconfiguration
during which
configured nomultiple
with event 4B related to
E-DCH D1, D2, D3, D4,
operations. The larger the value of
E-DCH
MAC-d PDUthroughput
sizes. is reported
Other again
services HSUPA D5, D6, D7, D8, 1, 2, 3, 4, 5,
this parameter, the longer the time
after suchonly
can have an event 4B is reported.
one E-DCH MAC-d WRFD- Introduction Enumerati D9, D10, D11, 6, 7, 8, 9, 10,
from the last reporting of
This
PDU parameter
size. is set to avoid too 010612 Package on Type D12 11, 12
throughput-related event 4A on E-
many channel reconfiguration
DCH to the next reporting, and the
operations. The larger the value of
smaller the possibility of triggering
this parameter, the longer the time
throughput-related event 4A on E- WRFD- HSUPA Interval
from the last reporting of
DCH. 01061208 DCCC Type 0~1023 0~1023
throughput-related event 4B on E-
DCH to the next reporting, and the
smaller the possibility of triggering
throughput-related event 4B on E- WRFD- HSUPA Interval
DCH. 01061208 DCCC Type 0~1023 0~1023
S,
RATE_608KBP
S,
RATE_1440KBP
S,
RATE_2048KBP 8, 16, 32, 64,
HSUPA UL rate adjustment set for S, 128, 144,
E-DCH channel. It contains rates for RATE_2880KBP 256, 384,
rate adjustment for E-DCH channel S, 608, 1440,
and is used in the HSUPA DCCC WRFD- HSUPA Bit Field RATE_5740KBP 2048, 2880,
algorithm. 01061208 DCCC Type S 5740
This parameter specifies the
maximum allowed SIR decrease
This parameter specifies the target
step for HSUPAspecifies
This parameter within anthe HSUPA
number of E-DCH PDU retransfer
adjustment
number period
of measurement of outer-loop WRFD- Power Interval 0~5, step:
when large probability periods
power
from control. 01061203 Control Type 0~5000 0.001
retransmission is appliedthe
the moment when forE-DCH
this
rate exceeds
service. the 4A
The large threshold to the
probability
This parameter specifies the target
moment
retransmissionwhen the throughput-
isspecifies
used to the
improve HSUPA
This
number parameter
of E-DCH PDU retransfer
related
the cell event
capacity 4A when
on E-DCH
the is load
cell WRFD- Power Interval 0~15, step:
number
when of measurement
small probability periods
triggered.
is high or This parameter is used to
congested. 01061203 Control Type 0~15000 0.001
from the moment
retransmission when the
is applied forE-DCH
this
avoid unnecessary reports triggered
rate fallsThe
service. below theprobability
small 4B threshold to
by E-DCH uplink throughput
the moment when
retransmission the throughput-
is used to improve HSUPA
fluctuation. The larger the value of
related event 4B
the throughput forona E-DCH
single UE is when WRFD- Power Interval 0~15, step:
this parameter, the longer the
triggered.
the cell load This parameter is set to
is normal. 01061203 Control Type 0~15000 0.001
required duration of the E-DCH
avoid unnecessary reports triggered
uplink throughput exceeding the 4A
by E-DCH uplink throughput
threshold, and the smaller the
fluctuation. The larger the value of
possibility of triggering throughput- WRFD- HSUPA Interval
this parameter, the longer the
related event 4A on E-DCH. 01061208 DCCC Type 0~1023 0~1023
required duration of the E-DCH
uplink throughput keeping below the
4B threshold, and the smaller the
possibility of triggering throughput- WRFD- HSUPA Interval
related event 4B on E-DCH. 01061208 DCCC Type 0~1023 0~1023
This parameter specifies whether ATM QoS
the RRC connection is established Introduction
HSUPA
preferentially onspecifies
the E-FACH. If this on Hub
This parameter the E-DCH WRFD- Introduction Enumerati EDCH_10MS, EDCH_10MS,
parameter is set to ON and both the NodeB
TTI type. 010612 Package on Type EDCH_2MS EDCH_2MS
UE and the serving cell support E- (Overbookin
FACH, then the RRC connection is g on Hub
established preferentially on the E- Node B
WCDMA EFACH channel
FACH, regardless downlink
of the setting of WRFD- Transmissio Interval
factor
SigChType. According to the related 050406 n) Type 0~100 0~100
protocols, the UE cannot transmit
This parameter specifies whether
signals
This over thespecifies
parameter FACH if both
thebe the
the compressed mode can
UE and theguaranteed
maximum cell supportpower E-FACH.of the WRFD- Enhanced Interval -35~15,
enabled for the HSPA+ service.
Thus,
DTCH ifmapped
this parameter
onto the isEFACH.
set to OFF 010688 CELL-FACH Type -350~150 step:0.1
When the parameter is set to TRUE,
and both the UE and the serving cell
the compressed mode can be
support E-FACH, then the RRC
enabled
E_FACHfor the HSPA+
support service.
indicator. When
connection can only be established
When the parameter
the indicator is TRUE,isitset to
indicates WRFD- Enhanced Enumerati TRUE,
on the non-FACH, even if the
FALSE,
that the cellthe supports
uplink andE_FACH.
downlink 010688 Inter-RAT
CELL-FACH on Type TRUE, FALSE FALSE
SigChType is set to FACH.
must return to the DCH before the Handover
Otherwise, the RRC connection is
compressed mode is enabled on for Based on
established on the corresponding
the HSPA+ service. This switch is Coverage
channel according to the setting of WRFD- Enhanced Enumerati
set for compatibility with the HSPA+ Inter
SigChType 010688 CELL-FACH on Type OFF, ON OFF, ON
terminals that might exist in the Frequency
network because these terminals do WRFD- Hard
not support the enabled 020303 Handover FALSE(Forbidde
compressed mode for the HSPA+ WRFD- Based on Enumerati n), FALSE,
service. 020302 Coverage on Type TRUE(Permit) TRUE
Type of the end date. "WEEK" DATE(Input with
indicates that the end date is a date),
Whether
weekday.to"DATE"
verify the centralized
indicates that the WEEK(Input
signaling
end date islink
a in the case
month day. of the link Configuratio with week),
establishment. ON: emergency
"DATEWEEK" indicates the end n DATEWEEK(Inp DATE,
When the switch is enabled, users
verification, that is,by
date is expressed thea verification
combinationis MRFD- Managemen Enumerati ut with date and WEEK,
of emergency call can preempt all
not required.and
of weekday OFF: non day.
month emergency 210301 t on Type week) DATEWEEK
the users of non emergency call.
verification, that is, the verification is
When the switch is disabled, users
required during the establishment of
of emergency call can only preempt Queuing
a signaling link in a link set. Through
users of non emergency call with WRFD- and Pre- Enumerati
verification, the stable operation
the preempted attributes. 010505 Emption on Type OFF, ON
ERR_PFM_5E6( OFF, ON
ERR_PFM_5
state of a signaling link can be ATM
ensured. You are advised to use the Transmissio OCCUR:5E-6), E6,
normal verification. That is, the n ERR_PFM_1E5( ERR_PFM_1
This parameter specifies whether
emergency verification switch is set WRFD- Introduction Enumerati OCCUR:1E-5),
OFF(OFF), E5,
the RNC specially handles the LCS
to OFF. 050301 Package on Type ERR_PFM_5E5(
ON(ON) ERR_PFM_5
OFF, ON
requests of emergency calls. In
OCCUR:5E-5), E5,
other words, the RNC provides JAN(January),
ERR_PFM_1E4( ERR_PFM_1
highly accurate location for FEB(February),
OCCUR:1E-4), E4,
emergency calls regardless of WRFD- Emergency Enumerati MAR(March),
ERR_PFM_5E4( ERR_PFM_5
license constraints. 021104 Call on Type APR(April),
OFF, ON OFF, ON
OCCUR:5E-4), E4,
MAY(May),
ERR_PFM_1E3( ERR_PFM_1
JUN(June),
OCCUR:1E-3), E3,
JUL(July),
Enumerati ERR_PFM_5E3( ERR_PFM_5
AUG(August), JAN, FEB,
Error emit threshold. None None on Type OCCUR:5E-3) E3
SEP(September MAR, APR,
Configuratio ), OCT(October), MAY, JUN,
n NOV(November) JUL, AUG,
MRFD- Managemen Enumerati , SEP, OCT,
Month on which DST ends 210301 t on Type DEC(December) NOV, DEC
Encryption mode used when the NE
serves as the FTP client
AUTO: indicating that the FTP client
IP address of the NE management IP Address 0.0.0.0~255.2
automatically selects the encryption AUTO(Automati
system None None Type None 55.255.255
mode c),
Encryption mode supported when
PLAINTEXT: indicating that the PLAINTEXT(Plai
the NE serves as the FTP server
plain text mode is used forcibly. n Text), AUTO,
AUTO: indicating that the FTP client
ENCRYPTED: indicating that the Enumerati ENCRYPTED(S PLAINTEXT,
automatically selects the encryption
encrypted mode is used forcibly. None None on Type SL Encrypted) ENCRYPTED
mode AUTO(Auto),
PLAINTEXT: indicating that the PLAINTEXT(Plai
plain text mode is used forcibly. n Text), AUTO,
ENCRYPTED: indicating that the Enumerati ENCRYPTED(S PLAINTEXT,
For each
encrypted mode is used forcibly. None None on Type SL Encrypte) ENCRYPTED
switch of this
parameter,
The encryption algorithm supported the value can
by RNC. Both UEA0 and UEA1 can WRFD- Bit Field be: ON or
be selected at one time. 011402 Encryption Type UEA0~0 UEA1 OFF.
Faulty
MRFD- Managemen Interval
End number of the alarm record 210304 t Type 1~65535 1~65535
Multi-Carrier
End time of the first interval when Switch off
the "Cell dynamic shutdown" feature WRFD- Based on Compound
is valid. 020117 Traffic Load Type HOUR, MIN 00:00~23:59
Multi-Carrier
End time of the second interval Switch off
when the "Cell dynamic shutdown" WRFD- Based on Compound
feature is valid. 020117 Traffic Load Type HOUR, MIN 00:00~23:59
Multi-Carrier
End time of the third interval when Switch off
the "Cell dynamic shutdown" feature WRFD- Based on Compound
is valid. 020117 Traffic Load Type HOUR, MIN 00:00~23:59
DISABLED(Proh
Status of the scheduled task. This ibit to Use),
Type of the M3UA localwhether
parameter entity. For
Type of thedetermines
destination entity. For to Enumerati ENABLED(Avail DISABLED,
details
start the about the ASP
scheduled and IPSP,
task. None None on Type able) ENABLED
details, see RFC4666.
see RFC4666.
M3UA_ASP: suggested to use DISABLED(Proh
M3UA_ASP: suggested to use M3UA_ASP~0||
when there is a signaling transfer ibit to Use),
when
The there is a specifies
parameter signalingthe transfer (M3UA_ASP)$$
point
Status (STP)
of thebetween
scheduled localnumber
thesubtask entity
to Enumerati ENABLED(Avail
O1E3_R5E4(OC DISABLED,
point
of codes(STP) between
(SF=128) used the local entity IP (M3UA_ASP)**
and
be the destination
added entityby the E- None None on Type able)
CUR:1E-3, ENABLED
and
DCHthe destination
Relative Grantentity
Channel (E- Transmissio M3UA_IPSP(M3
M3UA_IPSP: suggested to use RECOVERY:5E-
M3UA_IPSP:
RGCH)/E-DCH suggested to use n UA_ASP)**
when there is noHybrid ARQ
signaling transfer M3UA_SGP(M3
4),
when
Indicatorthere is no signaling
Channel (E-HICH). transferE- Introduction M3UA_IPSP~2||
point (STP) between the localThe entity UA SGP),
O5E4_R1E4(OC
point
RGCH (STP) between the local entity WRFD- on Iu Enumerati (M3UA_IPSP)$$ M3UA_ASP,
and theisdestination
used to adjust
entitythe uplink IP M3UA_IPSP(M3
CUR:5E-4,
and the destination
power available suggested entity
for the UE.to The 050409 Interface on Type (M3UA_IPSP) M3UA_IPSP
M3UA_SS7SP: useE- Transmissio UA IPSP),
RECOVERY:1E-
HICH
when the is used to provide
destination feedback
entity is a n M3UA_SS7SP( M3UA_SGP,
4),
on the ACK/NACK
narrowband information,
signaling point Introduction M3UA SS7SP), M3UA_IPSP,
O1E4_R5E5(OC
which
M3UA_SP: represents allthe
indicates whether dataof
types WRFD- on Iu Enumerati M3UA_SP(M3U M3UA_SS7S
CUR:1E-4,
that the RNC receives
the destination entity from the E- 050409 Interface on Type A SP) P, M3UA_SP
Return code of the command. If this RECOVERY:5E-
DCH is correct or not. The E-RGCH
parameter is specified, only the 5),
and E-HICH are dedicated channels
corresponding record is displayed. If Security O5E5_R1E5(OC
shared by multiple UEs. They share
this parameter is not specified, the MRFD- Managemen Interval CUR:5E-5, 1~429496729
the OVSF channel code with
return code is not considered. 210305 t Type RECOVERY:1E-
1~4294967295 5
SF=128 and use the orthogonal
5),
signature sequence to differentiate
O1E5_R5E6(OC
subscribers. HSUPA
CUR:1E-5,
For details about this parameter, WRFD- Introduction Interval
RECOVERY:5E- O1E3_R5E4,
refer to 3GPP TS 25.433. 010612 Package Type 1~8 1~8
6), O5E4_R1E4,
O5E6_R1E6(OC O1E4_R5E5,
CUR:5E-6, O5E5_R1E5,
Enumerati RECOVERY:1E- O1E5_R5E6,
Error-frame alarm threshold None None on Type 6) O5E6_R1E6
Enumerati OFF(OFF),
Error-frame detect switch None None on Type ON(ON) OFF, ON
Faulty
End synchronization number of the MRFD- Managemen Interval 1~214748364
AAL2 connection establishment Dynamic
alarm record 210304 t Type 1~2147483646 6
indication timer. This timer is started AAL2
when an AAL2 signaling entity Connections
sends the service user an indication in
for establishing an AAL2 WRFD- Iub/IuCS/Iur Interval
connection. 05030104 Interface Type 5000~30000 5000~30000
Dynamic
AAL2 connection establishment AAL2
request timer. This timer is started Connections
when an AAL2 signaling entity in
sends the peer node a request for WRFD- Iub/IuCS/Iur Interval
establishing an AAL2 connection. 05030104 Interface Type 5000~30000 5000~30000
Configuratio
n
MRFD- Managemen Compound HOUR, MIN, HOUR, MIN,
End time of DST 210301 t Type SEC SEC
The operation time of the log record 2000-1-1
is prior to this time. If this parameter Security year, month, 00:00:00~203
is not specified, the end time is not MRFD- Managemen Compound date, hour, min, 7-12-31
Execution
limited. mode of the commands 210305 t Type sec 23:59:59
Time when the scheduled subtask is
1. ONE_BY_ONE: indicating that
stopped. If the time mode is set to
the commands are executed one by
"DAILY_T", "WEEKLY_T", or
one according to the execution
"MONTHLY_T", you should set this Compound
sequence. Only one command can
parameter. None None Type hour, min 00:00~23:59
be executed once. ONE_BY_ONE(
2. PARALLEL: indicating that Execute One by
multiple commands are executed in One),
parallel. Multiple commands can be Enumerati PARALLEL(Para ONE_BY_ON
executed once. None None on Type llel Execute) E, PARALLEL
The operation time of the log record 2000-1-1
is prior to this time. If this parameter Security year, month, 00:00:00~203
is not specified, the end time is not MRFD- Managemen Compound date, hour, min, 7-12-31
limited. 210305 t Type sec 23:59:59
Faulty
End time of the alarm record. By MRFD- Managemen Compound 00:00:00~23:
default, the end time is 23:59:59. 210304 t Type hour, min, sec 59:59
Faulty
End time of the alarm record. By MRFD- Managemen Compound 00:00:00~23:
default, the end time is 23:59:59. 210304 t Type LOGINEVENT(L
hour, min, sec 59:59
ogin Event),
MANAGEEVEN
Security
T(Management LOGINEVEN
End date of the user operation. MRFD- Managemen Compound 2000-1-
Event), T,
Input format: YYYY&MM&DD 210305 t Type year, month, day 1~2037-12-31
AUTHEVENT(A MANAGEEV
uthentication ENT,
Type of the log to be queried. The Security D16, D32, D64,
Event), AUTHEVENT,
result is displayed by the specified MRFD- Managemen Enumerati D128, D256,
OTHEREVENT( 16, 32, 64,
OTHEREVEN
type. 210305 t on Type D512, D1024,
Other Event) 128,
T 256,
D2K, D3K, D4K, 512, 1024,
This parameter specifies the D6K, D8K, 2K, 3K, 4K,
End time of the user operation. The Security
threshold to trigger event 4A related D12K, D16K, 6K, 8K, 12K,
input format of this parameter is MRFD- Managemen Compound 00:00:00~23:
to DCH traffic volume, that is, the D24K, D32K, 16K, 24K,
HH&MM&SS. 210305 t Type hour, min, sec 59:59
upper limit of the traffic volume. The Dynamic D48K, D64K, 32K, 48K,
larger the value of this parameter, Channel D96K, D128K, 64K, 96K,
the smaller the possibility of Configuratio D192K, D256K, 128K, 192K,
triggering traffic-related event 4A on WRFD- n Control Enumerati D384K, D512K, 256K, 384K,
DCH. 021101 (DCCC) on Type D768K 512K, 768K
D64, D128, 8, 16, 32, 64,
D256, D512, 128, 256,
D1024, D2K, 512, 1024,
This parameter specifies the D3K, D4K, D6K, 2K, 3K, 4K,
threshold to trigger event 4B related D8K, D12K, 6K, 8K, 12K,
to DCH traffic volume, that is, the D16K, D24K, 16K, 24K,
lower limit of the traffic volume. The Dynamic D32K, D48K, 32K, 48K,
smaller the value of this parameter, Channel D64K, D96K, 64K, 96K,
This parameter specifies the event
the smaller the possibility of Configuratio D128K, D192K, 128K, 192K,
A reporting period. It refers to the
triggering traffic-related event 4B on WRFD- n Control Enumerati D256K, D384K, 256K, 384K,
delay from the moment when event
This
DCH.parameter specifies the 021101 (DCCC) on Type D512K 512K
A is triggered to the moment when
threshold of event A, that is, the
the event is reported. Note: this
upper limit of RLC retransmission
parameter is only used in rate adjust
ratio. When the monitored RLC
algorithm based on TCP, and is not WRFD- Flow Interval 0~100, step:
retransmission ratio exceeds this
used in RLC flow control algorithm. 040100 Control Type 0~1000 10
threshold and triggers the event A, it
This parameter specifies the
indicates that the quality of the radio
threshold of event B, that is, the
link is poor, and flow control
lower limit of RLC retransmission
measures should be done to reduce WRFD- Flow Interval 0~100, step:
ratio. When the monitored RLC
the RLC throughput. 040100 Control Type 0~1000 0.1
retransmission ratio goes lower than
this threshold and triggers the event
SUN(Sunday),
B, it indicates that the quality of the
MON(Monday),
radio link is good, and RLC WRFD- Flow Interval 0~100, step:
TUE(Tuesday),
throughput could be increased. 040100 Control Type 0~1000 0.1
WED(Wednesda
Configuratio y), SUN, MON,
n THU(Thursday), TUE, WED,
MRFD- Managemen Enumerati FRI(Friday), THU, FRI,
FIRST(First),
Weekday on which DST ends 210301 t on Type SAT(Saturday) SAT
SECOND(Secon FIRST,
Configuratio d), SECOND,
Upper limit of extended output
n THIRD(Third), THIRD,
analog signal 1. If "Sensor Type of
MRFD- Managemen Enumerati FOURTH(Fourth FOURTH,
External Analog 1" is set to
Sequence of the end week of DST 210301 t on Type ), LAST(Last) LAST
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Lower limit of extended output
External Analog 1" is set to n
analog signal 1. If "Sensor Type of
CURRENT, the unit of this MRFD- Managemen String 1~9
External Analog 1" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
External Analog 1" is set to n
CURRENT, the unit of this MRFD- Managemen String 1~9
parameter is A. 210301 t Type None characters
Configuratio VOLTAGE(Volta
Maximum measurement range of
n ge),
extended analog signal 1. If "Sensor
Sensor type of extended analog MRFD- Managemen Enumerati CURRENT(Curr VOLTAGE,
Type of External Analog 1" is set to
signal 1 210301 t on Type ent) CURRENT
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Minimum measurement range of
External Analog 1" is set to n
extended analog signal 1. If "Sensor
CURRENT, the unit of this MRFD- Managemen String 1~9
Type of External Analog 1" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Upper limit of extended output
External Analog 1" is set to n
analog signal 2. If "Sensor Type of
CURRENT, the unit of this MRFD- Managemen String 1~9
External Analog 2" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
External Analog 2" is set to n
CURRENT, the unit of this MRFD- Managemen String 1~9
parameter is A. 210301 t Type None characters
Lower limit of extended output
analog signal 2. If "Sensor Type of
External Analog 2" is set to
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
External Analog 2" is set to n
CURRENT, the unit of this MRFD- Managemen String 1~9
parameter is A. 210301 t Type None characters
Configuratio VOLTAGE(Volta
Maximum measurement range of
n ge),
extended analog signal 2. If "Sensor
Sensor type of extended analog MRFD- Managemen Enumerati CURRENT(Curr VOLTAGE,
Type of External Analog 2" is set to
signal 2 210301 t on Type ent) CURRENT
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Minimum measurement range of
External Analog 2" is set to n
extended analog signal 2. If "Sensor
CURRENT, the unit of this MRFD- Managemen String 1~9
Type of External Analog 2" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Upper limit of extended output
External Analog 2" is set to n
analog signal 3. If "Sensor Type of
CURRENT, the unit of this MRFD- Managemen String 1~9
External Analog 3" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Lower limit of extended output
External Analog 3" is set to n
analog signal 3. If "Sensor Type of
CURRENT, the unit of this MRFD- Managemen String 1~9
External Analog 3" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
External Analog 3" is set to n
CURRENT, the unit of this MRFD- Managemen String 1~9
parameter is A. 210301 t Type None characters
Configuratio VOLTAGE(Volta
Maximum measurement range of
n ge),
extended analog signal 3. If "Sensor
Sensor type of extended analog MRFD- Managemen Enumerati CURRENT(Curr VOLTAGE,
Type of External Analog 3" is set to
signal 3 210301 t on Type ent) CURRENT
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Minimum measurement range of
External Analog 3" is set to n
extended analog signal 3. If "Sensor
CURRENT, the unit of this MRFD- Managemen String 1~9
Type of External Analog 3" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Upper limit of extended output
External Analog 3" is set to n
analog signal 4. If "Sensor Type of
CURRENT, the unit of this MRFD- Managemen String 1~9
External Analog 4" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Lower limit of extended output
External Analog 4" is set to n
analog signal 4. If "Sensor Type of
CURRENT, the unit of this MRFD- Managemen String 1~9
External Analog 4" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
External Analog 4" is set to n
CURRENT, the unit of this MRFD- Managemen String 1~9
parameter is A. 210301 t Type None characters
Configuratio VOLTAGE(Volta
n ge),
Sensor type of extended analog MRFD- Managemen Enumerati CURRENT(Curr VOLTAGE,
signal 4 210301 t on Type ent) CURRENT
Maximum measurement range of
extended analog signal 4. If "Sensor
Type of External Analog 4" is set to
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
Minimum measurement range of
External Analog 4" is set to n
extended analog signal 4. If "Sensor
CURRENT, the unit of this MRFD- Managemen String 1~9
Type of External Analog 4" is set to
parameter is A. 210301 t Type None characters
VOLTAGE, the unit of this
parameter is V; if "Sensor Type of Configuratio
UE State in
External Analog 4" is set to n
Connected
CURRENT, the unit of this MRFD- Managemen String 1~9
Pending time after the traffic volume Mode
parameter is A. 210301 t Type None characters
event 4B for state transition from (CELL-
FACH to PCH is reported. This DCH, CELL- D250, D500, 250, 500,
When the traffic volume is below the UE State in
parameter is used to prevent too PCH, URA- D1000, D2000, 1000, 2000,
4B threshold and remains so for the Connected D0, D10, D20, 0, 10, 20, 40,
many traffic volume events 4B being WRFD- PCH, CELL- Enumerati D4000, D8000, 4000, 8000,
period specified by this parameter, Mode D40, D60, D80, 60, 80, 100,
reported. 010202 FACH) on Type D16000 16000
the event 4B is reported. This (CELL- D100, D120, 120, 160,
parameter prevents unnecessary DCH, CELL- D160, D200, 200, 240,
traffic volume events that are PCH, URA- D240, D320, 320, 640,
caused by traffic volume instability WRFD- PCH, CELL- Enumerati D640, D1280, 1280, 2560,
from being triggered. 010202 FACH) on Type D2560, D5000 5000
Transport
Uniquely identifying a FACH bearing Channel
the common transport channel in a WRFD- Managemen Interval
cell 021000 t Type 1~32 1~32
Interval
Flow control parameter index None None Type 0~1999 0~1999
Interval
Flow control parameter index None None Type 0~1999 0~1999
Interval
Flow control parameter index None None Type 0~1999 0~1999
Interval
Flow control parameter index None None Type 0~1999 0~1999
Interval
Flow control parameter index None None Type 0~1999 0~1999
Interval
Flow control parameter index None None Type 0~1999 0~1999
Interval
Flow control parameter index None None Type 10~1999 10~1999
None(None),
Enumerati 16bit(16bit), None, 16bit,
CRC verification mode of PPP link. None None on Type 32bit(32bit) 32bit
None(None),
Enumerati 16bit(16bit), None, 16bit,
CRC verification mode of MP link. None None on Type 32bit(32bit) 32bit
Enumerati OFF(OFF),
Logical port flow control switch None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Port flow control switch None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Port flow control switch None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Link flow control switch None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Link flow control switch None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
2G/3G Co-
Logical port flow control switch None None on Type ON(ON) OFF, ON
Transmissio
n
Resources
MRFD- Managemen Enumerati OFF(OFF),
Logical port flow control switch 211503 t on MBSC on Type ON(ON) OFF, ON
String 1~128
Name of the file None None Type None characters
Name of the file. The following Configuratio
special characters are not allowed in n
the file name: \, /, :, *, ?, ", <, >, and MRFD- Managemen String 0~128
|. 210301 t Type None characters
When the CELLID+RTT method is
selected, this parameter specifies
Name of the specified file. By License
whether forced soft handover is
default, the file is in the OMU active- MRFD- Managemen String 0~100
performed if the number of RTT
area path \ftp\license folder. 210403 t Type None characters
measured result is smaller than 3.
Maximum time of delay for
After soft handover is complete, Cell ID +
multiplexing. This parameter is used FP MUX for
accuracy of the CELLID+RTT RTT
for the system to send the IP
method is enhanced when the RNC WRFD- Function Enumerati
multiplexed data. If the time for Transmissio
obtains more radio links. 020801 Based LCS on Type OFF, ON OFF, ON
buffering the data exceeds this n
value, the system does not wait for WRFD- UDP MUX
the multiplexing of other packets. In 050420 for Iu-CS
this way, the overlong delay can be WRFD- Transmissio Interval
prevented. 050412 n Type 1~30 1~30
the command is executed. You can INTERFREQHA AULT,
also set the start time and end time RDHNDV, 3G2GCOMM
in the day in which the command is WBAMR,
IMPRVEDWNLN ON_LOAD,
executed, and set the time interval HSUPA,
KCVRGE, FP_MUX,
for executing the command in the RANSHARE,
ACRWHENSPU HSDPA_OVE
day. The default execution interval HSDPA3.6M,
OVER, R_IUR,
is one week and the default time HSDPA7.2M,
CBWHENIUIFA HS_DPCCH_
interval is 30 minutes. ROHC,
ULT, PREAMBLE_
MP6. MONTHLY_T:
segment size,the When thisof
length WBAMR, IURLC,
3G2GCOMMON SUPPORT,
parameter
packet shouldis set
betobigger
"MONTHLY_T",
or equel Interval HSUPA, NACC,
_LOAD, HSUPA_2ms
the RANSHARE, PSHBUG,
withcommand
it. is executed every None None Type ONTIME(Fixed
128~1024
FP_MUX, 128~1024
_10ms,
month. You can set the day in which HSDPA3.6M,
Time), IMSIBH,
HSDPA_OVER_ HSUPA_5_74
the command is executed. You can Fractional HSDPA7.2M,
DAILY_T(Day 32HSDPAUP
IUR, MBPS,
also set up to five time points for ATM ROHC,
Based IURLC, ERCELL,
WRFD- Function on Interval HS_DPCCH_PR HSUPA_OVE
executing the command in the day. NACC,
Scheduling), 64HSDPAUP
Link numberexecution
of fractional ATM/IMA 050302 Iub Interface Type EAMBLE_SUPP
0~31 R_IUR,
0~31
The default interval is one PSHBUG,
DAILY_C(Day ERCELL,
ORT, HUB_IUB_O
month. Fractional IMSIBH,
Based Duration), STMTRAONH
HSUPA_2ms_1 VERBOOKIN
7. MONTHLY_C: When this ATM 32HSDPAUPER
WEEKLY_T(We SDPA,
0ms, G,
parameter is set to "MONTHLY_C", WRFD- Function on Enumerati CELL,
ek Based
FRAATM, HSDPASTAT
FRAATM,
HSUPA_5_74M IMS_SIGNALI
the command
Fractional link is executed every
type 050302 Iub Interface on Type 64HSDPAUPER
Scheduling),
FRAIMA ETRAN,
FRAIMA
Time mode used when the log is BPS, NG_OVER_H
month. You can set the day in which CELL,
WEEKLY_C(We HSDPADRD,
exported. "ONTIME" indicates the HSUPA_OVER_
ONTIME(Fixed SPA,
PDCP,
the command is executed. You can STMTRAONHS
ek Based ENHANCEDI
time between two exact time. Security IUR,
Time), DYN_BAND
AMRC,
also set the start time and end time DPA,
Duration), UFLEX,
ONTIME,
"RELATIVE_T" indicates the time MRFD- Managemen Enumerati HUB_IUB_OVE
RELATIVE_T(R WIDTH_CTR
TFOTRFO,
ONTIME,
in the day in which the command is HSDPASTATET
MONTHLY_T(M STMTRAONH
DAILY_T,
before the current time. 210305 t on Type RBOOKING,
elative Time) OL_IUB_IP,
INDIRECRET
RELATIVE
executed, and set the time interval RAN,
onth Based SUPA,
DAILY_C,
IMS_SIGNALIN MBMS_OVE
RY,
for executing the command in the HSDPADRD,
Scheduling), ATMIPDUAL
WEEKLY_T,
G_OVER_HSPA
PDCP, AMRC, R_IUR,
INTERRATDI
day. The default execution interval ENHANCEDIUF
MONTHLY_C(M STACK,
WEEKLY_C,
,TFOTRFO, MBMS_P2P_
RECRETRY,
is one month and the default time Enumerati LEX,
onth Based IPTRANINIU
MONTHLY_T,
IMA for DYN_BANDWID
INDIRECRETRY OVER_HSDP
INTERRATR
interval is 30 minutes. None None on Type STMTRAONHS
Duration) R,
MONTHLY_C
E1T1 or TH_CTROL_IUB
, A,
EDIRECT,
UPA, IPTRANINIU,
Frame length. A longer frame Channelized _IP,
INTERRATDIRE MBMS_ENHA
CBS,
ATMIPDUALST FRACTIONAL
improves the transmission STM-1/OC- MBMS_OVER_I
CRETRY, NCED_BROA
CELLID,
ACK, IP,
efficiency, but at the same time WRFD- 3 on Iub Enumerati UR,
INTERRATREDI
D32, D64, D128, DCAST,
OTDOA,
D32, D64,
IPTRANINIUR, IPIUBOVERB
reduces the sensitivity to errors. 050304 Interface on Type MBMS_P2P_OV
RECT,
D256 CBS, MBMS_ADMI
AGPS,
D128, PUC,
D256
IPTRANINIU, OOKING,
ATM QoS ER_HSDPA,
CELLID, SSION_ENH
INTRACELLL
FRACTIONALIP FRACTIONAL
Introduction MBMS_ENHAN
OTDOA, AGPS, ANCE,
DB,
Security ,TXT(Plain Text ATM,
on Hub CED_BROADC
PUC, RAN_SHARI
INTERCELLL
Type of the file used for saving MRFD- Managemen Enumerati IPIUBOVERBO
Type), ATMOVERB
NodeB AST,
INTRACELLLDB NG_ENHANC
DB,
exported logs 210305 t on Type OKING,
CSV(CSV Type) OOKING,
TXT, CSV
(Overbookin MBMS_ADMISS
, ED_PACKAG
MULTIRAB,
ATM QoS FRACTIONALA IUBHYBRIDI
g on Hub ION_ENHANCE,
INTERCELLLDB E,
HCS,
Introduction TM, PTRAN,
Node B RAN_SHARING
, MULTIRAB, SRB_OVER_
RABDOWNSI
on Hub ATMOVERBOO MBMS8CHA
WRFD- Transmissio Interval _ENHANCED_P
HCS, HSDPA,
ZING, QCPE,
NodeB KING, NNELPERCE
Activation factor table index 050406 n) Type ACKAGE,
RABDOWNSIZI
0~33 SRB_OVER_
INTERSERVI
0~33
(Overbookin IUBHYBRIDIPT LL,
SRB_OVER_HS
NG, QCPE, HSUPA,
CEHO,
g on Hub RAN, 256KBPSCH
DPA,
INTERSERVICE MULTI_FBN
INTERLOAD
Node B MBMS8CHANN NLRATEONM
SRB_OVER_HS
HO, M,
HO,
WRFD- Transmissio Interval ELPERCELL, BMS,
UPA,
INTERLOADHO, HSDPA_13_9
IUQOSRENE
Activation factor table index 050406 n) Type 256KBPSCHNL
1~33 MBMSFLCFL
1~33
MULTI_FBNM,
IUQOSRENEG, 76MBPS,
G, LCSCZ,
RATEONMBMS, D,
HSDPA_13_976
LCSCZ, BFD_ARP_IP
HSDPA,
MBMSFLCFLD, VTFTSFIHO,
License MBPS,
HSDPA, ,IUFLEX,
VTFTSFIHO, CBIHBUMTS
MRFD- Managemen Bit Field BFD_ARP_IP,
IUFLEX, IUBSC, INTER_FHHB
IUBSC,
CBIHBUMTSAN ANDGSMGP
function switch 1. 210403 t Type INTER_FHHBD
IUBIP, MBMS DLQOS,
IUBIP, MBMS
DGSMGPRS, RS,
LQOS, INTER_RHB
SRNSRELOCAT SRNSRELOC
INTER_RHBDL DLQOS,
License ION, ATION,
QOS, MBMS_16_C
MRFD- Managemen Bit Field SRNSRWHHAN SRNSRWHH
MBMS_16_CHA HANNELS_P
function switch 2. 210403 t Type DOVER ANDOVER
NNELS_PER_C ER_CELL,
ELL, 60_HSUPA_
License 60_HSUPA_US USERS_PER
MRFD- Managemen Bit Field ERS_PER_CEL _CELL,
function switch 3. 210403 t Type L, TPMT, AQM TPMT, AQM
HT, ,
HSUPA_ADAPT SIMPLE_CEL
IVE_RETRANS L_BORADCA
MISSION, ST,
SIMPLE_CELL_ SATELLITE_
BORADCAST, TRANS_ON_I
SATELLITE_TR U,
ANS_ON_IU, IUR_G_NAC
License IUR_G_NACC, C,
MRFD- Managemen Bit Field IUR_G_LBB, IUR_G_LBB,
function switch 4. 210403 t Type IUR_G_SDB IUR_G_SDB
ATM QoS
Introduction
License
on Hub
MRFD- Managemen Bit Field
NodeB
function switch 5. 210403 t Type IUR_G_HBL IUR_G_HBL
If the available forward bandwidth is (Overbookin
ATM QoS
less than or equal to this value, the g on Hub
Introduction
forward congestion alarm is emitted Node B
on Hub
and forward congestion control is WRFD- Transmissio Interval
NodeB
striggered. 050406 n) Type 0~200000 0~200000
If the available forward bandwidth is (Overbookin
ATM QoS
greater than this value, the forward g on Hub
Introduction
congestion alarm is cleared and Node B
on Hub
forward congestion control is WRFD- Transmissio Interval
NodeB
stopped. 050406 n) Type 0~200000 0~200000
If the ratio of available forward (Overbookin
ATM QoS
bandwidth is greater than this value, g on Hub
Introduction
the forward congestion alarm is Node B
on Hub
cleared and forward congestion WRFD- Transmissio Interval
NodeB
control is stopped. 050406 n) Type 0~100 0~100
If the ratio of available forward (Overbookin
ATM QoS
bandwidth is less than or equal to g on Hub
Introduction
this value, the forward congestion Node B
on Hub
alarm is emitted and forward WRFD- Transmissio Interval
NodeB
congestion control is triggered. 050406 n) Type 0~100 0~100
If the available forward bandwidth is (Overbookin
ATM QoS
greater than this value, the forward g on Hub
Introduction
overload congestion alarm is Node B
on Hub
cleared and forward overload WRFD- Transmissio Interval
NodeB
control is stopped. 050406 n) Type 0~200000 0~200000
If the ratio of available forward (Overbookin
ATM QoS
bandwidth is greater than this value, g on Hub
Introduction
the forward overload congestion Node B
on Hub
alarm is cleared and forward WRFD- Transmissio Interval
NodeB
overload control is stopped. 050406 n) Type 0~100 0~100
If the available forward bandwidth is (Overbookin
ATM QoS
less than or equal to this value, the g on Hub
Introduction
forward overload congestion alarm Node B
on Hub
is emitted and forward overload WRFD- Transmissio Interval
If the ratio of available forward NodeB
control is triggered. 050406 n) Type 0~200000 0~200000
bandwidth is less than or equal to (Overbookin
ATM QoS
this value, the forward overload g on Hub
Introduction
congestion alarm is emitted and Node B
on Hub
forward overload control is WRFD- Transmissio Interval
NodeB
triggered. 050406 n) Type 0~100 0~100
(Overbookin
ATM QoS
g on Hub
Introduction
Node B
on Hub
Ratio of reserved forward bandwidth WRFD- Transmissio Interval
NodeB
for handover user 050406 n) Type 0~100 0~100
(Overbookin
g on Hub
Node B
Reserved forward bandwidth for WRFD- Transmissio Interval
handover user 050406 n) Type 0~200000 0~200000
The power occupancy factor of the Physical
control part. For detailed information Channel
of this parameter, refer to 3GPP TS WRFD- Managemen Interval
25.214. 022000 t Type 1~15 1~15
The power occupancy factor of the Physical
data part. For detailed information of Channel
this parameter, refer to 3GPP TS WRFD- Managemen Interval
25.214. 022000 t Type 0~15 0~15
Configuratio
Format of the geographic n
coordinates. The values include MRFD- Managemen Enumerati DEG(DEG),
"DEG" and "SEC". 210301 t on Type SEC(SEC) DEG, SEC
ATM QoS
Cell ID + DEG(Degree),
Introduction
Support localization maintenance, RTT SEC(Degree
on Hub
Degree mode and Degree Minute WRFD- Function Enumerati Minute and
NodeB
and Second mode can be selected. 020801 Based LCS on Type Second) 0, 1
(Overbookin
ATM QoS
g on Hub
Introduction
Node B NBAMR_BITRA
on Hub
WCDMA AMR general common WRFD- Transmissio Interval TE_4.75K,
NodeB
channel service downlink factor 050406 n) Type 0~100
NBAMR_BITRA 0~100
(Overbookin WBAMR_BITRA
g on Hub TE_5.15K,
TE_6.60K,
Node B NBAMR_BITRA
WBAMR_BITRA
WCDMA general common channel WRFD- Transmissio Interval TE_5.90K,
TE_8.85K,
OFF(Disable the
service uplink factor 050406 n) Type NBAMR_BITRA
0~100 0~100
Global routing management switch. WBAMR_BITRA
golbal route
TE_6.70K,
If this switch is turned on, the IP TE_12.65K,
management),
NBAMR_BITRA
addresses in the controlled range WBAMR_BITRA
ON(Enable the
TE_7.40K,
cannot be in the same network Enumerati TE_14.25K,
golbal route
NBAMR_BITRA
segment. WBAMR_BITRA
Indicates whether gold users involve None None
AMR/WB-
on Type management)
TE_7.95K,
OFF, ON
TE_15.85K,
in the switch of congestion control. AMR NBAMR_BITRA 4.75, 5.15,
WBAMR_BITRA
According to the policy set for gold Speech TE_10.20K, 5.90, 6.70,
TE_18.25K,
users
Maximumby operators,
rate of theif narrowband
service quality WRFD- Rates Enumerati NBAMR_BITRA 7.40, 7.95,
WBAMR_BITRA
of
AMRgold users service
speech should be forguaranteed
gold users. 020701 Control on Type TE_12.20K 10.20, 12.20
AMR/WB- TE_19.85K, 6.60, 8.85,
even in resource congestion, the
AMR WBAMR_BITRA 12.65, 14.25,
switch should be disabled. If the
Speech TE_23.05K, 15.85, 18.25,
switch is enabled, LDR such as rate
Maximum rate of the wideband AMR WRFD- Rates Enumerati WBAMR_BITRA 19.85, 23.05,
reduction and handover also occurs
speech service for gold users. 020701 Control on Type TE_23.85K 23.85
on gold users even in cell resource
congestion, which impacts user
service quality. If the switch is
disabled, no action is performed on WRFD- Load Enumerati OFF(OFF),
gold users. 020106 Reshuffling on Type ON(ON) OFF, ON
ATM QoS
Configuratio
Introduction
n
on Hub
MRFD- Managemen Interval
NodeB
Period for reporting GPS data 210301 t Type 1~60 1~60
(Overbookin
g on Hub
Node B
WRFD- Transmissio Interval
Transport resource group number 050406 n) Type 0~2047 0~2047
ATM QoS
Introduction
on Hub
NodeB
(Overbookin ECHOREPLY
g on Hub , UNREACH,
Node B ECHOREPLY, SOURCEQU
Type of the transport resource WRFD- Transmissio Enumerati ATM(ATM),
UNREACH, ENCH,
group 050406 n) on Type IP(IP)
SOURCEQUEN ATM, IP
REDIRECT,
Inter-RAT CH, REDIRECT, ECHO,
Handover ECHO, ROUTERADV
WRFD- Based on Interval ROUTERADVE ERT,
Uniquely identifying a GSM cell. 020303 Coverage Type RT,
0~65535 ROUTERSOL
0~65535
ROUTERSOLICI ICIT,
Inter-RAT
T, TIMXCEED, TIMXCEED,
Handover
PARAMPROB, PARAMPRO
A name identifying a GSM cell WRFD- Based on String 1~31
TSTAMP, B, TSTAMP,
uniquely. 020303 Coverage Type None characters
TSTAMPREPLY TSTAMPREP
, IREQ, LY, IREQ,
IREQREPLY, IREQREPLY,
Bit Field MASKREQ, MASKREQ,
Packet type against the ICMP attack None None Type MASKREPLY MASKREPLY
CPU usage threshold for handover
control. When the average CPU
usage of sliding windows reaches or
exceeds the threshold, handover WRFD- Flow Interval
Packet queue usage threshold for
flow control is triggered. 040100 Control Type 30~100 30~100
handover control. When the
average packet queue usage of
sliding windows reaches or exceeds
the threshold, handover flow control WRFD- Flow Interval
is triggered. 040100 Control Type 30~100 30~100
CPU usage threshold for recovery
from handover control. When the
average CPU usage of sliding
windows is lower than the threshold, WRFD- Flow Interval
Packet queue usage threshold for
handover flow control is stopped. 040100 Control Type 30~100 30~100
recovery from handover control.
When the average packet queue
usage of sliding windows is lower
than the threshold, handover flow WRFD- Flow Interval
control is stopped.
This parameter specifies the Happy 040100 Control Type 30~100 30~100
bit rate of the best-effort (BE)
service with different user priorities.
When event 5A is triggered, a
This Happy bit rate is sent to NodeB WRFD- Flow Enumerati
pending timer is started, during
by RNC through
Whether IUB
to control interface.
handover flow 040100 Control on Type ON, OFF ON, OFF
which event 5A will not be reported Dynamic
When the NodeB resource is limited
before the specified number is Channel
and the HS-DSCH bit rate of the
reached. This parameter can control Configuratio
user exceeds the Happy bit rate, the
the frequency for reporting event WRFD- n Control Interval
HS-DSCH scheduling priority will be
5A. 021101 (DCCC) Type 1~512 1~512
decreased. When this parameter is
set to zero, it indicates that NodeB
will not adjust the HS-DSCH HSDPA
This parameter indicates whether
scheduling priority according to the WRFD- Flow Interval
the cell of the neighboring RNC
Happy bit rate. 01061010 Control Type 0~5000 0~5000
supports the HARQ Preamble
capability. Mode1 means the cell
supports the HARQ Preamble Inter RNC
capability, whereas Mode0 means WRFD- Soft Enumerati Mode0,
not supporting it. 020203 Handover on Type Mode0, Mode1 Mode1
This parameter specifies the time
used for decision of HSUPA happy
bit. If all the buffered user data can
be transmitted at the current rate
during the time specified by this D2, D10, D20,
parameter, the HSUPA happy bit is HSDPA D50, D100, 2, 10, 20, 50,
set to happy; otherwise, the HSUPA WRFD- Flow Enumerati D200, D500, 100, 200,
IP
happy bit is set to unhappy. 01061010 Control on Type D1000 500, 1000
Transmissio
n
Introduction
Heartbeat interval when the SCTP WRFD- on Iub Interval
server is idle 050402 Interface Type 1000~600000 1000~600000
Load
Length of smoothing filter window of WRFD- Measureme Interval
HSDPA power requirement. 020102 nt Type 1~32 1~32
The minimum number of HSDPA
RAB establish request per CPUS to
Load
report KPI alarm. In a checking
Length of smoothing filter window of WRFD- Measureme Interval
period,if the number of HSDPA RAB 3.4/6.8/13.6
HSDPA bit rate. 020102 nt Type 1~32 1~32
establish request is higher than the /27.2 kbit/s
threshold and the HSDPA RAB RRC
Threshold of HSDPA RAB setup
setup successful ratio is lower than Connection
successful ratio per CPUS to report
this threshold,the KPI alarm of WRFD- and RAB Interval
KPI alarm. In a checking period,if 3.4/6.8/13.6
HSDPA RAB setup ratio is reported. 010510 Assignment Type 0~65534 0~65534
the ratio is lower than this threshold /27.2 kbit/s
and the number of HSDPA RAB RRC
establish request is higher than the Connection
related threshold,the KPI alarm of WRFD- and RAB Interval
HSDPA RAB setup ratio is reported. 010510 Assignment Type 0~100 0~100
DL activity factor of the HSUPA
Average throughput admission
streaming service. Signals might be
threshold of the HSDPA streaming
discontinuously transmitted because
service. If the sum of PBR of all the
of the activation detection of
accessed streaming users is lower
conversational service and source
than the average throughput
changes of data service. The activity
admission threshold of the HSDPA
factor is defined as the ratio of
streaming service multiplied by the
signal transmission time to channel
sum of GBR of all the accessed
occupation time. The activity factors
streaming users, it indicates that the
of the same transport channel might WRFD- Admission Interval 0~1, step:
QoS of the accessed users cannot
be different in UL and DL. 020101 Control Type 0~100 0.01
be satisfied and new HSDPA
streaming services are not allowed.
Otherwise, the QoS can be satisfied
and new HSDPA streaming services WRFD- Admission Interval 0~1,
are allowed. 020101 Control Type 0~100 step:0.01
Interval
According
Slot number to the relevant protocols, None None Type 0~5,8~27 0~5, 8~27
MIMO, 64QAM, and HS-SCCH Less
E_F_DPCH_
Operation cannot be configured HSPA+
If E_F_DPCH are selected, the HSDPA E_F_DPCH_OF OFF,
concurrently
HSPA servingtocell the change
same UE. This Downlink
corresponding function will is
beusually WRFD- Enhanced Enumerati F, E_F_DPCH_
parameter
triggered byspecifies
event theTo avoid
1D. 28Mbps per
enabled; otherwise, disabled. 010611 Package on Type E_F_DPCH_ON ON
configuration
frequent serving preference
cell changeof MIMO,
which User
64QAM,
64QAM, and HS-SCCH Less
may affect the system performance, WRFD- HSPA+
MIMO,
Operation
a protectionwhen
timerboth the UE and
TimerHSPA is 010680 Downlink
E_FACH,
the cell support these
needed. This timer shall three
be started WRFD- 21Mbps per Enumerati MIMO,
If 64QAM, MIMO, DTX_DRX,
features.
upon HSPA serving cell changed, 010681 User on Type MIMO, 64QAM 64QAM
64QAM,MIMO,E_FACH,DTX_DRX, E_FACH, HS_SCCH_L
This parameter specifies the
i.e. the serving HSDSCH cell
HS_SCCH_LESS_OPERATION DTX_DRX, ESS_OPERA
difference between the total HSPA
changed or the EDCH
and L2ENHANCED areserving
selected, cell HS_SCCH_LES TION,
power and the maximum
changed. And no more
the corresponding 1D-triggered
function will be WRFD- Admission Bit Field S_OPERATION, L2ENHANCE
transmission power of a cell. The
serving
enabled;cell change shall
otherwise, be
disabled. 020101 Control Type L2ENHANCED D
maximum value of HSPA dynamical
performed until the timer expires.
power can be adjusted to the total
However, this timer shall not restrict
amount of HSPA power. For details HSDPA
HSPA serving cell change to
about this parameter, refer to 3GPP WRFD- Power Interval -50~0,
another cell in the active set if
TS 25.308. 01061004 Control Type -500~0 step:0.1
current serving cell is to be removed
from the active set. The value 0 HSDPA
means this timer shall not be started Mobility
and serving cell change be initiated WRFD- Managemen Interval
This parameter specifies whether
immediately. 01061006 t Type 0~1024 0~1024
the Mac-hs transport block
transmitted in HS-SCCH Less
Operation mode supports second CPC - HS-
HS-PDSCH code. For details, refer WRFD- SCCH less Enumerati FALSE,
This parameter specifies whether
to the 3GPP TS 25.321 protocol. 010687 operation on Type FALSE, TRUE TRUE
the Mac-hs transport block
transmitted in HS-SCCH Less
Operation mode supports second CPC - HS-
HS-PDSCH code. For details, refer WRFD- SCCH less Enumerati FALSE,
This parameter specifies whether
to the 3GPP TS 25.321 protocol. 010687 operation on Type FALSE, TRUE TRUE
the Mac-hs transport block
transmitted in HS-SCCH Less
Operation mode supports second CPC - HS-
HS-PDSCH code. For details, refer WRFD- SCCH less Enumerati FALSE,
This parameter specifies whether
to the 3GPP TS 25.321 protocol. 010687 operation on Type FALSE, TRUE TRUE
the Mac-hs transport block
transmitted in HS-SCCH Less
Operation mode supports second CPC - HS-
The parameter specifies the number
HS-PDSCH code. For details, refer WRFD- SCCH less Enumerati FALSE,
of HS-DPSCH codes. This
to the 3GPP TS 25.321 protocol. 010687 operation on Type FALSE, TRUE TRUE
parameter is valid only when
"Allocate Code Mode" is set to
"Manual". For detailed information
about this parameter, refer to 3GPP WRFD- 15 Codes Interval
TS 25.308. 01061001 per Cell Type 1~15 1~15
and "Code Min Number for HS- 9.5DB(9.5dB),
Mode" is set to Automatic. The
PDSCH", based on whether the 10.0DB(10.0dB),
number of codes used by the HS-
code tree is idle or busy. When the 10.5DB(10.5dB),
PDSCH is dynamically set between
code resource used by the non- 11.0DB(11.0dB),
"Code Max Number for HS-PDSCH"
HSPA services is little, the HS- 11.5DB(11.5dB),
and "Code Min Number for HS-
PDSCH uses the rest idle codes as 12.0DB(12.0dB),
PDSCH", based on the idle state of
much as possible, and the 12.5DB(12.5dB),
the code tree. When the non-H
maximum number of idle codes 13.0DB(13.0dB),
services need more code resources,
(SF=16 continuous codes) is equal 13.5DB(13.5dB),
the non-H service will gradually
to the value of "Code Max Number WRFD- 15 Codes Interval 14.0DB(14.0dB),
occupy the codes used by the HS-
for HS-PDSCH". 01061001 per Cell Type 14.5DB(14.5dB),
1~15 1~15
PDSCH. The number of codes
Measure Power Offset (MPO) 15.0DB(15.0dB),
(SF=16 continuous codes) the HS-
Constant is used to compute 15.5DB(15.5dB),
DPSCH reserved is not less than
Measure Power Offset, as shown in 16.0DB(16.0dB),
the value of Code Min Number for WRFD- 15 Codes Interval
Measure Power Offset = Max(-6, 16.5DB(16.5dB),
HS-PDSCH. 01061001 per Cell Type 1~15 1~15
Min(13,CellMaxPower - 17.0DB(17.0dB),
PcpichPower - Measure Power 17.5DB(17.5dB),
OffsetConstant)). For details of the HSDPA 18.0DB(18.0dB),
IE "Measure Power Offset", refer to WRFD- Introduction Enumerati 18.5DB(18.5dB), -3~19,
3GPP TS 25.308. 010610 Package on Type 19.0DB(19.0dB) step:0.5
Interval
This parameter decides the
Subrack number None None Type 0~11 0~11
maximum number of subscribers
that the NodeB can schedule in a
TTI period. For detailed information HSDPA
of this parameter, refer to 3GPP TS WRFD- Introduction Interval
25.308. 010610 Package Type 1~15 1~15
This parameter specifies the time
interval of sending HSUPA HSUPA D10, D20, D50, 10, 20, 50,
scheduling information for TTI 10ms WRFD- Introduction Enumerati D100, D200, 100, 200,
This parameter specifies the time
when the user has Schedule Grant. 010612 Package on Type D500, D1000 500, 1000
interval of sending HSUPA
scheduling information alone for TTI
10ms when the user has no HSUPA D10, D20, D50, 10, 20, 50,
Schedule Grant and its buffer length WRFD- Introduction Enumerati D100, D200, 100, 200,
is greater than zero. 010612 Package on Type D500, D1000 500, 1000
This parameter specifies the time D2, D10, D20,
UL activity
interval factor ofHSUPA
of sending the HSUPA HSUPA D50, D100, 2, 10, 20, 50,
background service. Signals
scheduling information for TTImight
2ms WRFD- Introduction Enumerati D200, D500, 100, 200,
This parameter specifies the time
be
whendiscontinuously transmitted
the user has Schedule Grant. 010612 Package on Type D1000 500, 1000
interval of sending HSUPA
because of the activation detection
scheduling information alone for TTI D2, D10, D20,
of conversational service and
2ms when the user has no HSUPA D50, D100, 2, 10, 20, 50,
source changes of data service. The
Schedule Grant and its buffer length WRFD- Introduction Enumerati D200, D500, 100, 200,
activity factor is defined as the ratio
is greater than zero. 010612 Package on Type D1000 500, 1000
of signal transmission time to
channel occupation time. The
activity factors of the same transport
channel might be different in UL and WRFD- Admission Interval 0~1, step:
DL. 020101 Control Type 0~100 0.01
activated. If the parameter value is
NodeB is applied, the CE
set to Limited,
Threshold channel
for rate decreaseswitchofon
consumption of HSUPA UE is based
E2D (from E-DCH to
HSUPA BE service soft handover.DCH) should If
on the GBR. When the dynamic CE
be
theperformed
current rate before the the
is beyond
algorithm on NodeB is not applied,
compressed
threshold, themode is started
rate over and no
the EDCH is
the CE consumption of HSUPA UE
HSUPA
lowered services should exist
to the threshold beforewhen
the D8, D16, D32, 8, 16, 32, 64,
is based on the MBR. If the CE
the
soft compressed
handover, thus mode is activated.
ensuring the D64, D128, 128, 144,
consumption of HSUPA UE is based
If the parameter
success of the soft value is set toof the
handover D144, D256, 256, 384,
on the GBR, the CE LDR will not
BasedonUECap,
HSUPA BE service. theThe
RNC rate D384, D608, 608, 1450,
select HSUPA users to do data rate
determines
increase of HSUPAwhether in to SHO
activate the is
status WRFD- HSUPA Enumerati D1450, D2048, 2048, 2890,
reduction. If the CE consumption of
compressed
not limited bymode on E-DCH based
this parameter. 01061208 Inter-RAT
DCCC on Type D2890, D5760 5760
HSUPA UE is based on the
on the UE capability, and whether to Handover
MBR,the CE LDR will select HSUPA
establish an E-DCH when the Based on
UL
users activity
to dofactor
data rateof the HSUPAon
reduction
compressed mode is activated. Coverage
conversational
condition that service.
the HSUPA Signals
DCCC WRFD- Admission Enumerati
Strategy
This switch of the UE for
is used for rate
the Inter
might
switch be discontinuously transmitted
is ON. 020101 Control on Type MBR, GBR MBR, GBR
adjustment over the
compatibility of the HSUPA EDCH. Frequency
because of the activation detection
RATE_UP_AND_DOWN_ON_EDC
terminals existing in the network WRFD- Hard Limited, Permit, Limited,
of conversational service and
H indicates
because thatHSUPA
these the rateterminals
over the do 020303 Handover BasedOnUECap Permit,
source changes of data service. The
EDCH
not supportcan be theraised or lowered.
compressed mode WRFD- Based on Enumerati (Based On UE BasedOnUEC
activity factor is defined as the ratio
RATE_UP_ONLY_ON_EDCH
activated on the E-DCH. 020302 Coverage on Type Capability) ap
of signal transmission time to
indicates that the rate over the
channel occupation time. The
EDCH can only be raised. When UE
activity factors of the same transport
is in low activity state, it is no need
channel might be different in UL and WRFD- Admission Interval 0~1, step:
to degrade the traffic rate to the RATE_UP_A
DL. 020101 Control Type 0~100 0.01
threshold for HSUPA DCCC before RATE_UP_AND ND_DOWN_
state transition to CELL_FACH. _DOWN_ON_E ON_EDCH,
That means UE can transit to DCH, RATE_UP_O
CELL_FACH state at any rate over WRFD- HSUPA Enumerati RATE_UP_ONL NLY_ON_ED
the EDCH. 01061208 DCCC on Type Y_ON_EDCH CH
Threshold of all the HSUPA user
PBR whose schedule priority is the
same as that of users to be WRFD- Admission Interval 0~1,
admitted. 020101 Control Type 0~100 step:0.01
Threshold of all the HSUPA user
PBR whose schedule priority is
HSUPA BE traffic initial bit rate.
UL activity
higher thanfactor
that ofofusers
the HSUPA
to be WRFD- Admission Interval 0~1,
When DCCC algorithm switch and D8, D16, D32, 8, 16, 32, 64,
interactive
admitted. service. Signals might be 020101 Control Type 0~100 step:0.01
HSUPA DCCC algorithm switch are D64, D128, 128, 144,
discontinuously transmitted because
enabled, the uplink initial bit rate will D144, D256, 256, 384,
of the activation detection of
be set to this value if the uplink max D384, D608, 608, 1440,
conversational service and source
bit rate is higher than the initial bit WRFD- HSUPA Enumerati D1440, D2048, 2048, 2880,
changes of data service. The activity
rate. 01061208 DCCC on Type D2880, D5740 5740
factor is defined as the ratio of
signal transmission time to channel
occupation time. The activity factors
of the same transport channel might WRFD- Admission Interval 0~1, step:
be different in UL and DL. 020101 Control Type 0~100 0.01
Threshold of all the HSUPA user
PBR whose schedule priority is
lower than that of users to be WRFD- Admission Interval 0~1,
admitted. 020101 Control Type 0~100 step:0.01
The minimum number of HSUPA
RAB establish request per CPUS to
Load
report KPI alarm. In a checking
Length of smoothing filter window of WRFD- Measureme Interval
period,if the number of HSUPA RAB 3.4/6.8/13.6
HSUPA bit rate. 020102 nt Type 1~32 1~32
establish request is higher than the /27.2 kbit/s
threshold and the HSUPA RAB RRC
setup successful ratio is lower than Connection
this threshold,the KPI alarm of WRFD- and RAB Interval
HSUPA RAB setup ratio is reported. 010510 Assignment Type 0~65534 0~65534
Threshold of HSUPA RAB setup
successful ratio per CPUS to report
UL activity factor of the HSUPA
KPI alarm. In a checking period,if 3.4/6.8/13.6
streaming service. Signals might be
the ratio is lower than this threshold /27.2 kbit/s
discontinuously transmitted because
and the number of HSUPA RAB RRC
of the activation detection of
establish request is higher than the Connection
conversational service and source
related threshold,the KPI alarm of WRFD- and RAB Interval
changes of data service. The activity
HSUPA RAB setup ratio is reported. 010510 Assignment Type 0~100 0~100
factor is defined as the ratio of
signal transmission time to channel
occupation time. The activity factors
of the same transport channel might WRFD- Admission Interval 0~1, step:
CBR,
be different in UL and DL. 020101 Control Type 0~100 0.01
RT_VBR,
NRT_VBR,
The total HSUPA traffic of all License CBR, RT_VBR, UBR, BE,
operators cannot exceed the MRFD- Managemen Interval NRT_VBR, AF11, AF12,
HSUPA value in the license. 210403 t Type UBR, BE, AF11,
0~8040000 AF13, AF21,
0~8040000
AF12, AF13, AF22, AF23,
AF21, AF22, AF31, AF32,
Load AF23, AF31, AF33, AF41,
HSUPA auto retransmit load release WRFD- Measureme Interval AF32, AF33, 0~1,
CBR,
AF42, AF43,
threshold. 020102 nt Type 0~100
AF41, AF42, step:0.01
RT_VBR,
EF, LQBE,
CBR,
AF43,RT_VBR,
EF, NRT_VBR,
LQAF11,
Load NRT_VBR,
LQBE, LQAF11, UBR, BE,
LQAF12,
HSUPA auto retransmit load trigger WRFD- Measureme Interval UBR, BE, AF11,
LQAF12, AF11,
0~1, AF12,
LQAF13,
threshold. 020102 nt Type AF12,
0~100 AF13,
LQAF13, AF13,
LQAF21,AF21,
step:0.01
ATM QoS AF21, AF22,
LQAF21, AF22,
LQAF22,AF23,
Multi-Carrier AF23, AF31, AF31, AF32,
Introduction LQAF22, LQAF23,
The cell is shut down automatically Switch off AF32, AF33, AF33, AF41,
on Hub LQAF23, LQAF31,
only when the HSUPA user number WRFD- Based on Interval AF41, AF42, AF42, AF43,
NodeB LQAF31, LQAF32,
is no greater than the threshold. 020117 Traffic Load Type 0~5
AF43, EF, 0~5
EF, LQBE,
(Overbookin LQAF32, LQAF33,
g on Hub LQBE, LQAF11,
LQAF33, LQAF11,
LQAF41,
Node B LQAF12,
LQAF41, LQAF12,
LQAF42,
HSUPA background service bearer WRFD- Transmissio Enumerati LQAF13,
LQAF42, LQAF13,
LQAF43,
CBR,
HSUPA background primary path
primary path 050406 n) on Type LQAF21,
LQAF43, LQEF LQAF21,
LQEF
RT_VBR,
load threshold. It is one condition for
ATM QoS LQAF22, LQAF22,
NRT_VBR,
selecting the primary path or
Introduction LQAF23,
CBR, RT_VBR, LQAF23,
UBR, BE,
secondary path in the case of the ATM/IP
on Hub LQAF31,
NRT_VBR, LQAF31,
AF11, AF12,
establishment of the HSUPA WRFD- Dual Stack Interval
NodeB LQAF32,
UBR, BE, AF11, LQAF32,
AF13,
background service. 050404 Node B Type 0~100 0~100 AF21,
(Overbookin LQAF33,
AF12, AF13, LQAF33,
AF22, AF23,
g on Hub LQAF41,
AF21, AF22, LQAF41,
AF31, AF32,
Node B LQAF42,
AF23, AF31, LQAF42,
AF33, AF41,
HSUPA background service bearer WRFD- Transmissio Enumerati LQAF43, LQEF,
AF32, AF33, LQAF43,
AF42, AF43,
HSUPA background primary
secondary path 050406 n) on Type NULL
AF41, AF42, LQEF, NULL
EF, LQBE,
secondary path load ratio threshold.
ATM QoS
It is one condition for selecting the AF43, EF, LQAF11,
Introduction
primary path or secondary path in ATM/IP LQBE, LQAF11, LQAF12,
on Hub
the case of the establishment of the WRFD- Dual Stack Interval LQAF12, LQAF13,
NodeB
HSUPA background service. 050404 Node B Type LQAF13,
0~100 LQAF21,
0~100
(Overbookin
ATM QoS LQAF21, LQAF22,
g on Hub
Introduction LQAF22, LQAF23,
Node B
on Hub LQAF23, LQAF31,
WCDMA HSUPA background WRFD- Transmissio Interval
NodeB LQAF31, LQAF32,
service uplink factor 050406 n) Type 0~100 0~100
(Overbookin LQAF32, LQAF33,
g on Hub LQAF33, LQAF41,
Node B LQAF41, LQAF42,
HSUPA conversational service WRFD- Transmissio Enumerati LQAF42, LQAF43,
primary path 050406 n) on Type LQAF43, LQEF LQEF
AF41, AF42, AF42, AF43,
AF43, EF, EF, LQBE,
LQBE, LQAF11, LQAF11,
LQAF12, LQAF12,
LQAF13, LQAF13,
LQAF21, LQAF21,
ATM QoS LQAF22, LQAF22,
Introduction LQAF23, LQAF23,
ATM/IP
on Hub LQAF31, LQAF31,
HSUPA conversational primary path WRFD- Dual Stack Interval
NodeB LQAF32, LQAF32,
load threshold 050404 Node B Type 0~100 0~100
(Overbookin LQAF33, LQAF33,
g on Hub LQAF41, LQAF41,
Node B LQAF42, LQAF42,
HSUPA conversational service WRFD- Transmissio Enumerati LQAF43, LQEF, LQAF43,
secondary path 050406 n) on Type NULL LQEF, NULL
ATM QoS
Introduction
ATM/IP
on Hub
HSUPA conversational primary WRFD- Dual Stack Interval CBR,
NodeB
secondary path load ratio threshold 050404 Node B Type 0~100 0~100
RT_VBR,
(Overbookin
g on Hub NRT_VBR,
Node B CBR, RT_VBR, UBR, BE,
WCDMA HSUPA conversational WRFD- Transmissio Interval NRT_VBR, AF11, AF12,
CBR,
service uplink factor 050406 n) Type UBR,
0~100BE, AF11, AF13,
0~100 AF21,
RT_VBR,
AF12, AF13, AF22, AF23,
CBR, RT_VBR, NRT_VBR,
AF21, AF22, AF31, AF32,
ATM/IP NRT_VBR, UBR, BE,
AF23, AF31, AF33, AF41,
HSUPA high interactive primary WRFD- Dual Stack Interval UBR, BE, AF11, AF11, AF12,
HSUPA high primary secondary AF32, AF33, CBR,
AF42, AF43,
path load threshold 050404 Node B Type AF12,
0~100 AF13, AF13,
0~100 AF21,
path load ratio threshold. It is one AF41, AF42, RT_VBR,
EF, LQBE,
ATM QoS AF21, AF22, AF22, AF23,
condition for selecting the primary AF43, EF, NRT_VBR,
LQAF11,
Introduction AF23, AF31, AF31, AF32,
path or secondary path in the case ATM/IP CBR,
LQBE,RT_VBR,
LQAF11, UBR, BE,
LQAF12,
on Hub AF32, AF33, AF33, AF41,
of the establishment of the HSUPA WRFD- Dual Stack Interval NRT_VBR,
LQAF12, AF11, AF12,
LQAF13,
NodeB AF41, AF42, CBR,
AF42, AF43,
high interactive service. 050404 Node B Type UBR,
0~100BE, AF11,
LQAF13, AF13,
0~100 AF21,
LQAF21,
(Overbookin AF43, EF, RT_VBR,
EF, LQBE,
ATM QoS AF12, AF13,
LQAF21, AF22, AF23,
LQAF22,
g on Hub CBR,
LQBE,RT_VBR,
LQAF11, NRT_VBR,
LQAF11,
Introduction AF21, AF22,
LQAF22, AF31, AF32,
LQAF23,
Node B NRT_VBR,
LQAF12, UBR, BE,
LQAF12,
on Hub AF23, AF31,
LQAF23, AF33, AF41,
LQAF31,
WCDMA HSUPA interactive service WRFD- Transmissio Interval UBR, BE, AF11,
LQAF13, AF11, AF12,
LQAF13,
NodeB AF32, AF33,
LQAF31, CBR,
AF42, AF43,
LQAF32,
uplink factor 050406 n) Type AF12,
0~100 AF13,
LQAF21, AF13,
0~100 AF21,
LQAF21,
(Overbookin AF41, AF42,
LQAF32, RT_VBR,
EF, LQBE,
LQAF33,
ATM QoS AF21, AF22,
LQAF22, AF22, AF23,
LQAF22,
g on Hub AF43, EF,
LQAF33, NRT_VBR,
LQAF11,
LQAF41,
Introduction AF23, AF31,
LQAF23, AF31, AF32,
LQAF23,
Node B CBR,
LQBE,RT_VBR,
LQAF11,
LQAF41, UBR, BE,
LQAF12,
LQAF42,
on Hub AF32, AF33,
LQAF31, AF33, AF41,
LQAF31,
HSUPA high PRI interactive primary WRFD- Transmissio Enumerati NRT_VBR,
LQAF12,
LQAF42,
AF41, AF42,
AF11, AF12,
LQAF13,
LQAF43,
AF42, AF43,
NodeB LQAF32,
UBR, BE,LQEF
AF11, LQAF32,
AF13, AF21,
path 050406 n) on Type LQAF13,
LQAF43, LQAF21,
LQEF
(Overbookin AF43, EF,
LQAF33, EF, LQBE,
LQAF33,
ATM QoS AF12, AF13,
LQAF21, AF22, AF23,
LQAF22,
g on Hub LQBE, LQAF11,
LQAF41, LQAF11,
LQAF41,
Introduction AF21, AF22,
LQAF22, AF31, AF32,
LQAF23,
Node B LQAF12,
LQAF42, LQAF12,
LQAF42,
on Hub AF23, AF31,
LQAF23, AF33, AF41,
LQAF31,
HSUPA high PRI interactive WRFD- Transmissio Enumerati LQAF13,
LQAF43,
AF32, LQEF,
AF33,
LQAF13,
LQAF43,
AF42, AF43,
NodeB LQAF31, LQAF32,
secondary path 050406 n) on Type LQAF21,
NULL LQAF21,
LQEF, NULL
(Overbookin AF41, AF42,
LQAF32, EF, LQBE,
LQAF33,
ATM QoS LQAF22, LQAF22,
g on Hub AF43, EF,
LQAF33, LQAF11,
LQAF41,
Introduction LQAF23, LQAF23,
Node B LQBE, LQAF11,
LQAF41, LQAF12,
LQAF42,
on Hub LQAF31, LQAF31,
HSUPA low PRI interactive primary WRFD- Transmissio Enumerati LQAF12,
LQAF42, LQAF13,
LQAF43,
NodeB LQAF32, LQAF32,
path 050406 n) on Type LQAF13,
LQAF43, LQEF LQAF21,
LQEF
(Overbookin LQAF33, LQAF33,
ATM QoS LQAF21, LQAF22,
g on Hub LQAF41, LQAF41,
Introduction LQAF22, LQAF23,
Node B LQAF42, LQAF42,
on Hub LQAF23, LQAF31,
HSUPA low PRI interactive WRFD- Transmissio Enumerati LQAF43, LQEF, LQAF43,
NodeB LQAF31, LQAF32,
secondary path 050406 n) on Type NULL LQEF, NULL
(Overbookin LQAF32, LQAF33,
g on Hub LQAF33, LQAF41,
Node B LQAF41, LQAF42,
HSUPA middle PRI interactive WRFD- Transmissio Enumerati LQAF42, LQAF43,
primary path 050406 n) on Type LQAF43, LQEF LQEF
LQAF13, LQAF13,
LQAF21, LQAF21,
ATM QoS LQAF22, LQAF22,
Introduction LQAF23, LQAF23,
on Hub LQAF31, LQAF31,
NodeB LQAF32, LQAF32,
(Overbookin LQAF33, LQAF33,
g on Hub LQAF41, LQAF41,
Node B LQAF42, LQAF42,
HSUPA middle PRI interactive WRFD- Transmissio Enumerati LQAF43, LQEF, LQAF43,
HSUPA low interactive primary path
secondary path 050406 n) on Type NULL LQEF, NULL
load threshold. It is one condition for
selecting the primary path or
secondary path in the case of the ATM/IP
establishment of the HSUPA low WRFD- Dual Stack Interval
HSUPA low interactive primary
interactive service. 050404 Node B Type 0~100 0~100
secondary path load ratio threshold.
It is one condition for selecting the
primary path or secondary path in ATM/IP
the case of the establishment of the WRFD- Dual Stack Interval
HSUPA low interactive service. 050404 Node B Type 0~100 0~100
Faulty
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Humidity alarm switch 210304 t on Type OPEN(Open) OPEN
Interval
IMA for
IMA group None None Type 0~31 0~31
E1T1 or
Channelized
STM-1/OC- 0~31(AEUa),
WRFD- 3 on Iub Interval 0~83(AOUa),
IMA for
IMA group 050304 Interface Type 0~167 0~167(AOUc)
E1T1 or
Channelized
STM-1/OC-
WRFD- 3 on Iub Interval
IMA for
IMA identifier 050304 Interface Type 0~255 0~255
E1T1 or
Channelized
STM-1/OC-
This parameter specifies whether it WRFD- 3 on Iub Interval
IMA for
is
IMAallowed to use the initial rate of
link number 050304 Interface Type 0~335 0~335
E1T1 or
IMS signaling set on the LMT, that
Channelized
is, the value of [Ims initial rate].
STM-1/OC-
- ON: If the IMS signaling is carried
WRFD- 3 on Iub Enumerati V1.0(V1.0),
on the DCH, the maximum rate of 3.4/6.8/13.6
This parameter
IMA protocol specifies the
version 050304 Interface on Type V1.1(V1.1) V1.0, V1.1
IMS signaling takes the value of /27.2 kbit/s
channel type of IMS signaling.
[Ims initial rate]. RRC
- DCH: Both uplink and downlink are
- OFF: The maximum rate of IMS Connection
preferably carried on DCH. DCH(UL_DCH,D
signaling does not take the value of WRFD- and RAB Enumerati
- HSDPA: Uplink is preferably L_DCH),
[Ims initial rate]. 010510 Assignment on Type OFF, ON OFF, ON
carried on DCH, and downlink is HSDPA(UL_DC
The MAC-c on Iub interface will
preferably carried on HS-DSCH. H,DL_HSDSCH)
increase after the Enhanced
- HSPA: Uplink is preferably carried IMS , DCH,
CELL_FACH is supported in the
on E-DCH, and downlink is WRFD- Signaling Enumerati HSPA(UL_EDC HSDPA,
cell. When the UE enters the
preferably carried on HS-DSCH. 010618 over HSPA on Type H,DL_HSDSCH) HSPA
Enhanced CELL_FACH state, this
parameter determines the
guaranteed speed of the MAC-c
flow that sends IMS data on the Iub WRFD- Enhanced Interval
interface. 010688 CELL-FACH Type 1~1000 1~1000
Faulty
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Infrared alarm switch 210304 t on Type OPEN(Open) OPEN
ATM
Transmissio
n
Maximum allowed duration without WRFD- Introduction Interval
For each
credit 050301 Package Type 1200~2000 1200~2000
switch of this
The MAC-c on Iub interface will
parameter,
increase after the Enhanced
The integrity protection algorithm the value can
CELL_FACH is supported in the
supported by RNC. Only UIA1 is WRFD- Integrity Bit Field be: ON or
cell. When the UE enters the
supported currently. 011401 Protection Type UIA1 OFF.
Enhanced CELL_FACH state, this
The MAC-c on Iub interface will
parameter determines the
increase after the Enhanced
guaranteed speed of the MAC-c
CELL_FACH is supported in the
flow that sends interactive service WRFD- Enhanced Interval
cell. When the UE enters the
data on the Iub interface. 010688 CELL-FACH Type 1~1000 1~1000
Enhanced CELL_FACH state, this
parameter determines the maximum
speed of the MAC-c flow that sends
interactive service data on the Iub WRFD- Enhanced Interval
interface. 010688 CELL-FACH Type 1~2000 1~2000
HSPA
inter-frequency
UE moving services. handover ofpolicy.
measurement
proportion
that
The micro ofatthe
cells
inter-frequency
the
with speed
UEs
exist measurement 120
ininthis cell. To
measurement
This
km/h,
quantity parameter
it is
of recommended
Ec/No affects
for PS the that
domain thisof a
compressed
enable
start RSCP the traffic mode
threshold active
absorption
(namely,statusfunction
proportion
parameter
HSPA services.of
be the
set UEs
to -12 in dB. CSAMR_INT
cell
of the and
compressed micro the success
cells, the rate of the hard
compressed
compressed
For
The the
handover. cellTo
inter-frequency inmode
mode
which
set
start
active
this the threshold)
UEs
measurement status
parameter, areof is a CSAMR_INTER ERFREQ,
mode
one of start
the threshold
key parameters should in be
theset
cell
moving
start andEc/No the
at success
various
threshold rate
speeds, (namely,ofthis
the hard FREQ, CSNONAMR
you
higher need
inter-frequency andtothe consider
stop
handover the following
threshold policy. be set
handover.
parameter
compressed To
should set
mode this
bestart parameter,
set to -14
threshold) dB. Inter CSNONAMR_IN _INTERFREQ
factors:
lower,
This thatthe
parameter moving
is, the speed
threshold
affects the offorthe UEis
event
you
Through
one need
of the tokey consider
emulation, parameters thethe following
call drop
in the Frequency TERFREQ, ,
and
2D/2F
Thresholdthebecell
proportion ofradius.
set higher
signal
the UEs byinusing
quality of UECPICH
the
factors:
rate remains
inter-frequency moving low speed
for the
handover ofUEsthe
policy.moving Hard PSR99_INTERF PSR99_INTE
For
RSCP.
target CS
compressed domain
frequency mode services,
for triggering
active when
status inter-
of a
and
at
This thethe speed
parametercell radius.
ofas 120
affects km/h thewhen this Handover REQ, RFREQ,
RSCP
Events
frequency
cell and is2D used
the and
measurement.
success2F the measurement
arerate the of the hard
For CS domain
parameter
proportion of theservices,
isinter-frequency
set to -14indB. when WRFD- Based on Bit Field PSHSPA_INTE PSHSPA_INT
quantity
compressed
This
handover.
Ec/No parameter
is
forTo
used
mode
set
as isUEs start
used
this
the
and
to setstop
parameter,
measurement
Events
MBDR
compressed
measurement, 2D
switch and mode 2F
the are
active
RNC the status
sends theof a 020302 Coverage Type RFREQ ERFREQ
switches.
measurement
you need If
to you
consider want
control to
on
the start
the the
event
following
quantity
compressed
cell and for inter-frequency
the mode
success start
rate andof stop
the hard
signaling
compressed
2C.
factors: theto moving
stop
mode theearlier,
compressed
speed setthe
of theUE HCS
measurement,
switches.
handover. IfTo you setthe want RNC
this sends
to start the the
mode
threshold
The
and and
event
the cell the
for
2C event
is
radius. 2Dparameter,
inter-frequency
triggered larger;when if youthe (Hierarchica
signaling
compressed
you need to stop
mode
to consider the compressed
earlier,
thereports set
following the
measurement,
want
signal
For HSPAtoquality
reduce of
services, ifthetheping-pong
the UE
target
when effect
frequency
RSCP is WRFD- l Cell Interval
mode
threshold
factors: andfor theevent inter-frequency
2D of larger; ifvalue
you Inter
event
of
is
used starting
above 2Fmoving
as when
and
this
the
speed
the
stopping
threshold.
measurement measured the UE
the quantity 021200 Structure) Type -24~0 -24~0
measurement,
want to reduce if
the the UE
ping-pong reports
and
is
for
the
larger
compressed cell
thanradius.
inter-frequency the
mode, value
set the of this effect Frequency
event
of
For starting
HSPA 2F when and
services, the measurement,
stopping measured the value Hard
parameter.
difference
the RNCthan between
sends the eventsEc/No
when
signaling 2Dtoand is
is
used larger
compressed as the the
mode,
measurement value
set of
the this
quantity Handover
Events
2F larger.
activate 2D and
thebetween 2F
compressed are the mode and
parameter.
difference
for inter-frequency events 2D and WRFD- Based on Interval
compressed
When
start the signals
inter-frequency modeatmeasurement,
start
the and
entrance
measurement, stop to Inter
Events
2F
the
L3 RNC2D
larger.
filtering sendsand 2F
coefficient the are thethe inter-
signaling
for to too 020302 Coverage Type -24~0 -24~0
switches.
an elevator
ifcompressed
the UE reports If you
or a want
subway
event to start
change the Frequency
activate mode
themeasurement.
compressed start2D and whenstop the
frequency
compressed
fast
measured to perform valuemode handover,
istheearlier,mode
smaller set
you
than theand
the Hard
This
switches.
start parameter If
inter-frequency you is
want relative
to start
measurement, the
The
threshold
should
value physical
ofstart forthe
this meaning
event 2D
compressed
parameter. of this mode
larger; if you Handover
threshold
compressed
ifparameter
the UE of cell
reports mode for
event judging
earlier, 2D whether
set
when thethe
want
earlier
For the to andreduce
UE isset the
moving the
this same ping-pong
parameter
at theas the
speed effect of 5 WRFD- Based on Interval
downlink
threshold
measured MBDR
for
value event algorithm
2D
is smaller larger; of inter
than you
if the Inter
measurement
of
km/h, starting
optimally it is toand -90
recommendedmodel
stopping
dBm. andthe intra-
that this 020302 Coverage Type -115~-25 -115~-25
frequency
want toofreduce is in overload
theinter-frequency
ping-pong state. It
Threshold
value
frequency
compressed
parameter
this to parameter.
be
stop
measurement.
mode,
set to set
-100 the The effect
dBm; for
Frequency
represents
of starting
the UEand
measurement
For the
moving percentage
stopping
with measurement
at the the of the
speed of 5 Hard
difference
the UE movingis that
between the
at the report
events
speed period
2D of and 50
cell
km/h, admission
compressed
quantity it of
is mode,
Ec/No
recommended controlfor setPS threshold
the
domain
that this of Handover
for
km/h, the
2F larger. inter-frequency
it is Therecommended measurement
that this
downlink.
difference
HSPA
parameter between
services.be set smaller to events
-17 thisdB; 2Dforand theto WRFD- Based on Interval
is
When 480 the
parameter ms, whereas
signals
be set at the
to the report
-97 entrance
dBm; for the Inter
parameter
2F
The larger.
UEelevatorinter-frequency
moving is,at the
the earlier downlink
measurement
speed of 50 km/h, 020302 Coverage Type -24~0 -24~0
period
an
UE moving for the or intra-frequency
a subway change
of 120 too Frequency
According
MBDR toat
algorithm thecell
the ofspeed inter-frequency
inter frequency
itstop
fast toEc/No
is recommended
measurement perform threshold
is 200
handover,that (namely,
ms. this
Inyoupractice, Hard
km/h,
hierarchical
goes it is overload
into recommended
selection, state. thethat RNC
When this cellis
compressed
parameter
itshould
can be bethe
adjusted mode stop
setcompressed
to -14 threshold)
according dB; for the
parameter
chooses
load is
start
the
higher beproperset
than tothe dBm.to
-93product
inter-frequency mode
of
Handover INTER_FREQ_
one
UE
traffic of and
moving the key at the parameters
thisspeed of in 120the
earlier
For theperformance
measurement
downlink cell set inadmission
which
control
measurement.
parameter
the UEs are to
parameters WRFD- Based on Interval COV(Coverage-
km/h,
The
optimally it iscell
inter-frequency
larger recommended
to the -85 handover
value
dBm. of
control
this policy.
that this 020302
Inter
Coverage Type -115~-25 -115~-25
moving
implement
threshold at and
various
coverage,
this speeds,speedthisand is based inter-
This
parameter
parameter, parameter bethe set toparameter,
affects
stronger -12the dB.
the
Frequency
parameter
estimation,
lower than should
and
the downlinkbe set
traffic to -95
absorption.
cell Hard frequency
proportion
For the
smoothing cellof inthe
effect which UEs
andthe in
the UEs
higher are
dBm.
admission Through
INTER_FREQ_COV: control emulation, coverage-
threshold, the callthe Handover handover),
compressed
moving
anti-fast-fading at various mode active status
speeds,
capability, thistheof a
but
drop
based
downlink rate remainsalgorithm
inter-frequency
MBDR low for the inter
handover. UEs INTER_FREQ_
cell and
parameter
lower the the success
should
signal be rate
change ofof-14
settracing
to the dB. hard WRFD- Based on
Inter
Interval
moving
frequency at
INTER_FREQ_COV_NCOV: the
is speed
insetoverload of 120
state. km/h 020302 Inter
Coverage Type COV_NCOV(Co
0~100 0~100
handover.
Through
capability. Tothe
emulation,
If thisthe
value parameter,
of call
this drop Frequency D0, D1, D2, D3,
when
coverage-basedthis parameter is set to -95
inter-frequency Frequency verage-based
you
rate
parameterneed
remains toisconsider
low
set too for the theUEs
small, following
moving Hard D4, D5, D6, D7, 0, 1, 2, 3, 4,
dBm.
handover, and non-coverage-based Hard and non-
factors:
at the
unnecessary speedmoving of
hard speed
120 km/h
handover of the
when UEthis
or Handover D8, D9, D11, 5, 6, 7, 8, 9,
Events 2D and 2F
inter-frequency are thetriggered
handover Handover coverage-based INTER_FREQ
and
parameterthe cellchanged
frequently isradius.
set to -14 handoverdB. may WRFD- Based on Enumerati D13, D15, D17, 11, 13, 15,
compressed
by speed mode start
estimation. and stop Based on inter-RAT _COV,
For
Events
occur. HSPA 2D services,
and 2F are when the Ec/No is 020302 Coverage on Type D19 17, 19
switches.
INTER_FREQ_TA: If you want to start
traffic-based the Coverage handover), INTER_FREQ
used
compressed as the measurement
mode start and quantity
stop
compressed
inter-frequency mode earlier, which
handover, set the WRFD- Inter-RAT INTER_FREQ_T _COV_NCOV
for inter-frequency
switches. If you want measurement,
to start the
threshold
includes for function
event 2Dsimilar larger;toif you
the RNC the
compressed sends mode the earlier,
signaling settothe stop 020302 Handover A(Traffic-based ,
want to reduce the
coverage-based ping-pong effect
inter-frequency WRFD- Based on Enumerati inter-frequency INTER_FREQ
the compressed
threshold for event mode and theif inter-
2D larger; you Inter
of starting and stopping the
handover. 020303 Coverage on Type handover) _TA
frequency
want to reduce measurement,the ping-pong if theeffect UE Frequency
compressed mode, set the
reports
of starting event and2F when the
stopping the Hard
difference between events 2D and
measured
compressed valuemode, is larger
set the than the Handover
2F larger.
value
difference of this parameter.
between events 2D and WRFD- Based on Interval
When the signals at the entrance to Inter
Events
2F larger. 2D and 2F are the 020302 Coverage Type -24~0 -24~0
an elevator or a subway change too Frequency
compressed mode start and stop
fast to perform handover, you Hard
switches. If you want to start the
should start the compressed mode Handover
compressed mode earlier, set the
earlier and set this parameter WRFD- Based on Interval
threshold for event 2D larger; if you Inter
optimally to -90 dBm. 020302 Coverage Type -115~-25 -115~-25
want to reduce the ping-pong effect Frequency
of starting and stopping the Hard
compressed mode, set the Handover
difference between events 2D and WRFD- Based on Interval
2F larger. 020302 Coverage Type -24~0 -24~0
handover.
or
want Inter-Frequency
to reduce To set thethis parameter,
periodical
ping-pong effect
compressed
After
indicator inter-frequency
and mode
Inter-RAT active
measurementstatus of a
you
of need
measurement.
starting to
and consider
The
stopping the
physical thefollowing
unithardis
cell
starts, and
measurement the
if the success
no inter-frequency
indicator rate of
areofset the toUE
factors:
dB.
compressed moving
mode, speed
setparameter,
the this the
handover.
handover
FALSE Toperformed
is set this when
and the in
-difference
CPICH_RSCP: cellthe
between
system
radius. to use
message,
events the RSCP
2D
the
and
you
timer
UE need
expires,
does to
not consider
the
start the
inter-frequency
corresponding following
For
Timer PS
measurement domain
length for services,
inter-frequency
quantity when
fortheevent
2F larger.
factors:
measurement moving and speed the of
compressed
cellmeasurement
reselection. UE 2CIf
RSCP
measurement.
or
When is used
Inter-Frequency
the signals as the at periodical
the
and
mode
the
quantity
the cell
(if forstarted)
inter-frequency radius. areFDD
inter-frequency stopped. Theto
entrance Inter
After
an
For PSinter-frequency
measurement.
elevator domain or aThe subway
services, measurement
physical change
when unit is too Frequency
value
measurement
measurement,0 indicates the
indicator
the RNC timerand
sendsisInter-
not the to
starts,
dBm.
fast
Ec/No to if
is no
perform
used inter-frequency
handover,
as the you
measurement Hard
be
RAT enabled.
signaling measurementto activate indicator
the are
compressed set NOT_REQUI
handover
-quantity
BOTH:both
should start
foris inter-frequency
performed
quantities
the compressed when
of themode this
target Handover
This
to
mode TRUEparameter
and butstart no is used to prevent
inter-frequency
inter-frequency or RE,
timer
cell
earlier expires,
must
measurement, and be set the
satisfied
this inter-frequency
when
parameter
the RNCcell sends WRFD- Based on Interval
the long inter-frequency
inter-RAT
measurement,
measurement neighboring
if
is the
stopped. UE is the
reports
In NOT_REQUIRE, INTER_FREQ
performing
optimally
signaling tothe
to -85 handover
activate dBm. the compressed 020302 Coverage Type -115~-25 -115~-25
measurement
configured,
event 2D the when the state
UE
the (compressed
does
measured not perform value INTER_FREQ, ,
addition,
judgement.Valid
mode and startcompressedwhen
inter-frequency themodeInter- is
mode)
the due
inter-frequency
is smaller than to unavailable
the value or inter-RAT
of this0 INTER_RAT, INTER_RAT,
deactivated,
Frequency
measurement, if any.
measurement
if the TheUE value
chooses
reports
measurement
Threshold
parameter. to stop of
and the celltarget cells that
reselection.
inter-frequency Load INTER_FREQ_ INTER_FREQ
indicates
PERIODICAL_REPORTING
event 2D that
when the the timer
measured is not Mode. tovalue
be
meet
For the
details,
measurement
For the UE handover
refer
moving with to requirements.
the
measurement
at the3GPP speed TSof 5 WRFD- Measureme Enumerati AND_INTER_R _AND_INTER
enabled.
Recommended
Threshold
is smaller to
than stop value
theof (default
inter-frequency
value of this Inter
Setting
25.331
quantity the
it protocol. value
isofrecommended
RSCP this parameter 020102 nt on Type AT _RAT
km/h,
This
value): parameter
measurement
parameter. withis for
used PSto
measurement
domain
that
prevent this Frequency
smaller
non-HSPA
parameter can reduce
services.
be the
set to -100 dBm; for long-time
the
For long
quantity
the UE inter-frequency
BOTH(PERIODICAL_REPORTING
oftheEc/No
moving foratPS thedomain
speed of 5 Hard CPICH_EC/N
impact
The
the UE of
inter-frequency
moving compressed
at the measurement
speed mode of 50on
measurement
Mode),
non-HSPA
km/h, it is state
services.
recommended (compressedthat this Handover CPICH_EC/NO, O,
the serving
stop
km/h, RSCP
itdue cell.
threshold
is recommended In this(namely, case,
that this
mode)
CPICH_RSCP(EVENT_TRIGGER
The inter-frequency
parameter to
be unavailable
set tostop measurement
-17 threshold)
dB;mode for the is WRFD- Based on Enumerati CPICH_RSCP, CPICH_RSC
however,
compressed
parameter thebe compressed
mode
set to -97 dBm; forthatthe Inter
measurement
Mode)
stop
UE Ec/No
moving of the
threshold
at the speed target
(namely,
of cells
50 km/h, 020302 Coverage on Type BOTH P, BOTH
might
one
UE be
ofthe
moving stopped
thehandover
key
at the earlier
parameters
speed and
of in120 as
the a Frequency
meet
itcompressed
is recommended mode requirements.
stop
that threshold)
this is
result the
inter-frequency
km/h, is UE
it the cannot
recommended handover trigger inter-
policy.
that this Hard
Setting
one of
parameter the value
key
be set of
parameters
to this
-14 parameter
dB; in the
for the
frequency
This
parameterparameter handover. affects For the the Handover
smaller
inter-frequency
UE moving canbe at
set
reduce
the
to the
handover
speed
-93 dBm.
long-time
ofpolicy.
120
coverage-based
proportion
For the cell of in the
which inter-frequency
UEs the in UEs are on WRFD- Based on Interval
impact
This
km/h, of
parameter
it is the compressed
recommended affects thethatmode thisof a Inter
handover,
compressed
moving at call mode
various drops may
active
speeds, occur.
status
this 020302 Coverage Type 0~512 0~512
the servingof
proportion
parameter cell.
be the
set InUEs
to this
-12 incase,
dB. Frequency
cell and the
parameter
however, the success
shouldcompressed be rateset to ofmodethe hard
-95 Hard
compressed
For the cell inmode
which active
the UEsstatus areof a
handover.
dBm.
might Through
be To
stopped set this
emulation,
earlier parameter,
the as
and calla Handover
cell
moving and at the success
various rate ofthis
speeds, the hard
you
drop
result need
rate
the to consider
remains
UE cannot the
lowtriggerfor following
theinter-UEs WRFD- Based on Interval
handover.
parameter To
should set this be set parameter,
to -14
factors:
moving
frequency thethe
at moving
speedspeed
handover. of 120ofkm/h thedB. UE 020302
Intra RNC
Coverage Type 0~512 0~512
you
Through needemulation,
to considerthe thecall following
drop Softer
and the
when
Threshold this cell of radius.
parameter
signal is set of
quality to the
-95
factors:
rate remains moving speed
for theofUEs
lowservices, the UE moving WRFD- Handover
For PS
dBm.
target domain
frequency for triggering when inter-
and
at
When thethespeed
it cell
is radius.
of
checked, 120 km/h
system when this 020202 Inter RNC
RSCP
Eventsis2D
frequency usedandas 2Fthe
measurement. aremeasurement
the
For PS
parameter
supports domain is set
inter-frequencyservices,
to -14 dB.when WRFD- Soft Enumerati
quantity
compressed
This parameterfor inter-frequency
mode is used startto and setstop
Ec/No
Events
neighboring is2D usedand as
detect2Fthe are measurement
the
function. 020203 Handover on Type OFF, ON OFF, ON
measurement,
switches.
measurement If you the want
control RNC to
on sends
start
the the
eventthe
quantity for inter-frequency
compressed mode
signaling
compressed
2C. to stopmode thestart
earlier,
and stop
compressed set the HCS
measurement,
switches. the RNC sends the
mode
threshold
The andIf
event the
for
youinter-frequency
event
want to start
2D larger;
the
if you
signaling
compressed to2C stopis triggered
mode theearlier,
compressed when
set the
the (Hierarchica
measurement,
want
signal toquality
reduce of ifthetheping-pong
the UE reports
target effect
frequency WRFD- l Cell Interval
mode
threshold andfor theevent inter-frequency
2D larger; ifvalue you Inter
event
of
is above 2F this
starting when
and the measured
stopping
threshold. the 021200 Structure) Type -24~0 -24~0
measurement,
want to reduce ifthetheping-pong
UE reports effect Frequency
is larger thanmode,
compressed the value set the of this
event
of 2F when
starting the measured
and stopping the value Hard
parameter.
difference between events 2D and
is larger thanmode,
compressed the value set of this
the Handover
Events
2F larger. 2D and 2F are the
parameter.
difference between events 2D and WRFD- Based on Interval
compressed
When the signals modeatstart the and entrance stop to Inter
Events
2F larger. 2D and 2F are the 020302 Coverage Type -24~0 -24~0
switches.
an elevator If you
or a want
subway to start
change the too Frequency
Cell-level switch
compressed mode forstartinter-frequency
and stop
compressed
fast to perform mode handover, earlier,you set the Hard
and inter-RAT
switches. If youhandover.want to start the
threshold
should start forthe event 2D larger;mode
compressed if you Handover
INTERFREQ:
compressed mode only measuring
earlier, set inter- the
want
earlier toand reduce set the parameter
this ping-pong effect WRFD- Based on Interval
frequency
threshold for cells event and2D performing
larger; if you Inter
of startingtoand
optimally -90stopping
dBm. the 020302 Coverage Type -115~-25 -115~-25
inter-frequency
want to reduce the handover.ping-pong effect Frequency
compressed mode, set the
INTERRAT:
of starting and only measuring
stopping the GSM Hard
difference between events 2D and
cells and performing
compressed mode, set inter-RAT
the Handover
2F larger.
handover
difference .between events 2D and WRFD- Based on Interval INTERFREQ(int
When the signals at the entrance to Inter
SIMINTERFREQRAT:
2F larger. measuring 020302 Inter
Coverage Type er-frequency
-24~0 -24~0
an elevator or a subway change too Frequency
both inter-frequency and inter-RAT Frequency handover only),
fast to perform handover, you Hard
cells, performing inter-frequency or Hard INTERRAT(inter
should start the compressed mode Handover
inter-RAT handover according to the Handover -RAT handover
earlier and set this parameter WRFD- Based on Interval
type of the cell that first meets the Based on only),
optimally to -85 dBm. 020302 Coverage Type -115~-25 -115~-25
handover decision condition. Coverage SIMINTERFRE
The parameter decides the WRFD- Inter-RAT QRAT(inter- INTERFREQ,
handover for each cell when the 020302 Handover frequency and INTERRAT,
inter-frequency and inter-RAT cells WRFD- Based on Enumerati inter-RAT SIMINTERFR
coexist. 020303 Coverage on Type handover) EQRAT
The
2D/2F disadvantage
inter-RAT
be through
set higher ofby
measurement theusing periodical
stop
CPICH
informed signaling but the
report mode
RSCP
RSCP. threshold is that it requires large
(namely,
cell need be updated only when the
amount
the cellofis
compressed signaling
amode and threshold)
stop itincreases
If
handover decisionmicrois cell,
performed indicates in is
the
one
that load
of
the theonkey
default theparameters
air interface
value should inand
the
be for
the RNC. The disadvantage of the
signaling
inter-RAT
modified according processing.
handover policy.
to the This
link it
periodical report mode is that
As for theresult.
parameter
estimate impact
affects onthenetworkproportion of Inter PERIODICAL_R
requires large amount of signaling
performance,the
the
Events UEs 2Din compressed
and 2F two are report
the mode modesactive Frequency EPORTING(Peri PERIODICAL
and increases the load on the air
have both
status
compressed of a advantages
cell and
mode the and
start success
and stoprate Hard odical reporting), _REPORTIN
interface and for signaling
disadvantages.
of the
switches.
This hard
parameter handover.
When Currently,
isthe the cell To is
relative the
set this in
located Handover EVENT_TRIGG G,
processing.to trigger inter-RAT
Threshold
traditional
parameter,
the center
threshold periodical
of you
ofcell need
the for frequencyreport
to
judging consider mode
whether is
the WRFD- Based on Enumerati ER(Event EVENT_TRIG
As for
measurement the impact on
with measurementnetwork Inter PERIODICAL_R
used.
following
coverage
uplink MBDR factors:
or the the speed
inter-frequency
algorithm ofdomain of
inter the 020302 Coverage on Type trigger) GER
performance,the
quantity of RSCP two
for CS report modes Frequency EPORTING(Peri PERIODICAL
UE and
measurement
frequency
have both theis cell
in radius. and
quantity
overload
advantages isstate.
set toIt Hard odical reporting), _REPORTIN
services.
For
BOTH, CS Ec/No
represents
disadvantages. domain theservesservices,
percentage
Currently, as the whenof the
the Handover EVENT_TRIGG G,
For CS domain services, when
Ec/No
decision
cell is
admission
traditional used
standard as
control
periodical thefor measurement
events
threshold 2D of and
RSCP is used as thereport measurement mode is WRFD- Based on Enumerati ER(Event EVENT_TRIG
quantity
2F.
uplink.
used. If you for
The wantinter-frequency
smallerto start this the
parameter 020302 Coverage on Type trigger) GER
quantity
This parameter for inter-RAT
is used measurement,
to increase
measurement,
compressed
is, the earlier the
mode
uplink RNC
earlier,
MBDR sends set the the
the
time RNC sends
of inter-freqency the signaling reselection. to It
signaling
threshold
algorithm to
for stop
event the
of inter frequency 2D compressed
larger; if
goes you
activate
is notto compressed
configured when mode its value and start
is {1~4.75},
mode
want and
into overload reducethe inter-frequency
the ping-pong
state. Whenifcell effect
load
inter-RAT
255. For measurement,
detailed information, thereferUE WRFD- Intra RNC Interval {255},
measurement,
of
is startingthan
higher andthe if the
stoppingproductUE the reports
reports
to 3GPP the event 2D whenofthe uplink Inter
event
compressed
cell 2F TS
admission when 25.304.
the measured
mode,
control the value
setthreshold and
010801 Cell Update
Frequency
Type 4~19,255 step:0.25
measured value is smaller than the
is
thislarger
difference than
parameter, the
between and value events
is of this
lower 2Dthan andthe Hard
value of this parameter.
parameter.
2F
uplink larger.
cell admission
If you want to start thecontrol compressed Handover
If the
Events
threshold, cell2Disuplinka macro
and 2F are cell,the itinter-RAT
indicates
mode earlier, set MBDR the threshold algorithm for of WRFD- Based on Interval
that micro
measurement
inter frequency cellsstartexist
is in andin this
overload stopcell. state. To 020302 Coverage Type 0~100 0~100
event 2D larger. Otherwise, set the Mobility
enable
switches, thethat traffic
is, the absorption
inter-RAT function
threshold
This for event 2D smaller; if
of theparameter
compressed micro cells, mode specifies
the
start whether
compressed
and stop Control and
you
inter-RATwant to reduce the
handover of theping-pong
UE Service
mode
switches. startBecause
threshold should service
different be set
effect
among ofdifferent
starting operatorsand stopping is be the WRFD- Differentiati Enumerati
highermay
types and have the stop different threshold set
compressed
allowed. mode, set the 02130403 on on Type NO, YES NO, YES
lower,
requirements that is, on thethe threshold
signal quality for event Mobility
difference between events 2D and
2D/2F
and
This be set inter-RAT
different
parameter higher
specifies by handover
usingwhether CPICH Control and
2F larger.
RSCP.
policies
intra-RAT to be used,
handover the inter-RAT
of thetoUE Service
In most cases, UEs want be
If the cell
measurement
among is a micro
different startoperatorscell,
or stop it indicates
is WRFD- Differentiati Enumerati
maintained within a 3G network.
that
allowed. the default
thresholds value should by
are distinguished be CS, 02130403 on on Type NO, YES NO, YES
Thus, the start threshold of the inter-
modified
PS, and signaling accordingservices. to the link
RAT measurement is set smaller Inter-RAT
estimate
If you want result.
to start the compressed
than that of the inter-frequency Handover
Events
mode earlier, 2D andset 2Fthe arethreshold
the for
measurement. This facilitates the WRFD- Based on Bit Field CSAMR_INTER CSAMR_INT
compressed
event 2D larger; mode if youstartwant and to stop
triggering
MBDR of the inter-frequency
switch 020303 Coverage Type RAT ERRAT
switches.
reduce theWhen ping-pong the cell is located
effect of in
handover. For scenarios where no
the
startingcenter andofstopping
the frequency the Inter-RAT
inter-frequency neighboring cells or
coverage
compressed or the mode, inter-frequency
set the Handover
where inter-frequency coverage is
measurement
difference between quantity events is set 2Dtoand WRFD- Based on Interval
not ample, the inter-RAT
BOTH,
2F larger. Ec/No serves as the 020303 Coverage Type -24~0 -24~0
measurement start threshold should
decision standard for events 2D and
Threshold
be set relatively to stop inter-RAT
This
2F. Ifparameter
you want to islarger
the relative
start
so as to
the
Inter-RAT
measurement
facilitate the with measurement
triggering of inter-RAT Handover
threshold
compressed of cellmode for earlier,
judging whether
set the
quantity
measurement. of RSCP Thus, for CS call domaindrops WRFD- Based on Interval
downlink
threshold MBDR for event algorithm
2D larger; of inter
if you
services.
reduce. 020303 Coverage Type -115~-25 -115~-25
RAT
want is to in overload
reduce the state.ping-pong It effect
For CS domain services, when
represents
of starting and the stopping
percentage theof the Inter-RAT
RSCP is used as the measurement
cell admission
compressed control
mode, setthreshold
the of Handover
quantity for inter-RAT measurement,
downlink.
difference The between smaller eventsthis 2D and WRFD- Based on Interval
the RNC sends the signaling to
parameter
2F larger. is, the earlier downlink 020303 Coverage Type -24~0 -24~0
deactivate compressed mode and
MBDR algorithm of inter RAT goes
stop inter-RAT measurement, if the Inter-RAT
into overload state. When cell load
UE reports the event 2F when the Handover
is higher than the product of
measured value is larger than the WRFD- Based on Interval
downlink cell admission control
value of this parameter. 020303 Coverage Type -115~-25 -115~-25
threshold and this parameter, and is
lower than the downlink cell Inter-RAT
admission control threshold, Handover
downlink MBDR algorithm of inter WRFD- Based on Interval
RAT is in overload state. 020303 Coverage Type 0~100 0~100
Threshold
speed of UEs to trigger
is medium, inter-RAT
handover.
the center
Tother_RAT
measurement
Toindicates
of set
the
with
frequency the there
this parameter,
measurement inter-RAT is a Handover
comparatively
you
coverage
handoverneed to big
consider shadow
or the inter-frequency the fading
following Based on
quantity
square ofdecision
error, RSCP so the
threshold;
for HSDPA
factors:
measurement
Cell the speed
Individual quantity
Offset ofrecommended
the
(CIO)is UE and
to the
setindicates Coverage
services.
value of inter-RAT measurement Inter-RAT
cell
BOTH,
the radius.
offset
The non-HSDPA Ec/No
maximum numberof the serves
inter-RAT as the cell;
of attempts
For
layer 3 filter services,
coefficients when
is Ec/No
3; 2D and Handover
For
H
to HSPA
decision
represents
perform services,
standard the forwhenevents
hysteresis.
non-coverage-based is
RSCP
-In cells is used
where as
the the measurement
average moving WRFD- Based on
used
2F. as
If you want
Hysteresis
inter-RAT the canmeasurement
handovers. to start wrong
reduce the quantity
quantity
speed offor UEs inter-RAT
is high, measurement,
there is athe 020303 Service D0, D1, D2, D3,
for
This inter-frequency
compressed
decisionsparameter causedmode bymeasurement,
earlier,
specifies signal the set
jitters.
the RNC
comparatively sends the
small signaling
shadow to
fading WRFD- Inter-RAT D4, D5, D6, D7, 0, 1, 2, 3, 4,
the
The
maximumRNC
threshold
sensitivity sends
for
numberevent the
of aof signaling
2D
GSM larger;
attempts mobile to stop
if you
activate
square compressed
error, so the mode
recommended andforstart 020305
Inter-RAT
Handover D8, D9, D11, 5, 6, 7, 8, 9,
the
want
phone compressed
to isreduce
-102
the RNC tomeasurement, the
dBm, mode
perform inter-RATping-pong
so and
the the inter-
effect
outdoor Handover
inter-RAT
value of inter-RAT measurement if the UE WRFD- Based on Enumerati D13, D15, D17, 11, 13, 15,
frequency
of starting
reception measurement,
and
level stopping
should not theifbe the UE
handovers
reports
layer the
3 filter
after
event a2D
coefficients
non-coverage-
when is 2. thelower 020306
Based on
Load on Type D19 17, 19
reports
compressed
than
based -90 event
dBm,
inter-RAT 2F
mode, when
consideringset the
handover the a margin
failure. Service
measured
This parameter valuespecifiesis smallerwhether than the
measured
difference
of
The 3 dB
handoverfor value
between
compensation is larger
attempts events than
of
should 2D fastthe
and WRFD- Inter-RAT
value
the of this parameter.
inter-RAT handover, for Cell ID +
value
2F larger.
fading,
involve of5the
this
dBtargetparameter.
for compensation
cells that have of not 020305 Handover
If you want
example,
Timer length to
toand the start
GSM thenetwork,
compressed is RTT
If
mode
the
Events
slow cell
fading,
been tried 2D
earlier,
isbutfor
a2 macro
dB2Finter-RAT
satisfy
set
are
for
the
cell, itinter-RAT
thehandover
compensation
the
threshold
indicates
for WRFD- Based on Interval
performed
measurement.
that micro cellsstartwhen the
existand RNC
inand this cannot WRFD- Function
measurement
of
eventinterference
conditions. 2D larger. noise,
Otherwise,
stop 2cell.
dB
set
To
for
the 020306 Load Type 1~16 1~16
meet
After
enable
switches, the
inter-RAT
the accuracy
traffic
that is, requirements
measurement
absorption
the inter-RAT starts,
function of 020801 Based LCS
compensation
threshold for event of ambient
2D smaller;noise. if
the
of emergency
ifcompressed
nothe inter-RAT
micro cells,
mode calls
handoverthe for theis
compressed
start and LCS.
stop WRFD- OTDOA
The
you values
want of
towhen inter-RAT
reduce the handover
ping-pong lower than
This
performed
mode
switches.parameter
start threshold
Because enables
thisdifferent
timer
should emergency
times
be
service out,
set 020802 Based LCS
decision
Timer
effect lengththresholds
ofobtain
starting for vary
inter-RAT
and stopping with the
the -110, -110~-
calls
the
higher
types tomay
inter-RAT
and the
have the LCS
measurement
stop threshold
different of significant
isbe set WRFD- A-GPS Enumerati
handover
measurement.
compressed policy. To have UEs hand 48(Actual
accuracy
stopped.
lower,
requirements that inis,
In amode,
different
addition,
the
on the
set
the
threshold
signal
the
system. for
qualityevent 020803 Based LCS on Type NO, YES NO, YES
over
After only
difference inter-RAT to the
between GSM
measurement
eventscells with
2D starts,high
andif value meets
compressed
2D/2F be setcanmode
highersetisthe by deactivated,
using
and
quality,different
if nolarger.
2F you
inter-RAT inter-RAT
handover is CPICH
handover
inter-RAT Inter-RAT
Cell ID +
the condition:
any;
RSCP.
policies
handover If the value
todecision
be used, is 0, theyou
threshold cantoinfer
inter-RAT
performed
In
that most
the cases, when
inter-RAT UEs this timer
want
measurement be aout,
totimes Handover
RTT
Actual Value
If the
measurement cell
comparatively
the inter-RAT is a micro
start
high
measurement cell,
or
value,stop it indicates
for is WRFD- Based on Interval = GUI Value -
maintained
timerthe is not within a 3G network.
started. WRFD- Function
that
thresholds
example
stopped. default
-85
In are dBm.
addition,valuethe
distinguished should by be CS, 020303 Coverage Type 0~63 111)
Thus,
This
To set the
parameter
this start threshold
parameter, specifies youthe of the
need type inter-
toof 020801 Based LCS
modified
PS, and
compressed according
signaling mode is to the
services. link
deactivated, if
RAT
inter-RAT
consider measurement
the handover
following isthatset is
factors:smaller WRFD- OTDOA
estimate
If youIfwant
any; result.
theofvalue to start is theyou
0, compressed
can infer
than
performed
This that
parameter the
when inter-frequency
the
aims RNC cannot 020802 Based LCS DRD,
Events
mode
that the 2D andset
earlier, 2F theareto the preventfor
threshold that
measurement.
meet
the theinter-RAT
handover
compressed accuracy Thismeasurement
conditions
mode
facilitates
requirements
start are to
and notthemet
stop of WRFD- A-GPS Enumerati DRD, MEAS_BASE
event
timer 2D larger;
is notofstarted. if you want
triggering
the
and emergency
thethe compressedthe inter-frequency
calls for
mode the LCS.
isofkept in 020803 Based LCS on Type MEAS_BASED D
switches.
reduce
To set this When
ping-pong
parameter, the cell effect
you is located
need to
handover.
for acenter
long For
time scenarios
when the where
UE does no
the
starting
consider and of the
stopping
the following frequency the
factors: Inter-RAT
inter-frequency
not move or is neighboring
moving inthe a low orcells
coverage
compressed
This parameter the
mode, inter-frequency
aims settocoverage
prevent that Handover
where
speed. inter-frequency
Thebetween service quality is is
measurement
difference
the handover quantity
conditions events isareset 2D toand
not met WRFD- Based on Interval
not ample,
adversely the
affected inter-RATand
BOTH,
2F
and theEc/No
larger. compressed serves asthe
mode thetotal
is should
kept 020303 Coverage Type -24~0 -24~0
measurement
availablestandard capacity startdecreases
threshold if the
decision
for a long time when for events
the UE 2D
does and
Threshold
be set to stop
relatively inter-RAT
larger so as to Inter-RAT
compressed
2F. If you want mode to is kept
start the for a long
not movethe
measurement
facilitate or is moving
with
triggering in
of ainter-RAT
measurement low Handover
time.
compressed mode earlier, set
speed.
quantity
measurement. Theof RSCP serviceThus, forquality
HSDPA
call is the
drops WRFD- Based on Interval
Most inter-RAT
threshold for event handovers
2D larger; canif be you
adversely
services.
reduce. affected and the total 020303 Coverage Type -115~-25 -115~-25
finished
want to within 60
reduce the s.ping-pong effect
available
For HSDPA capacity
services, decreases
when RSCP if the is
As
of for the impact
starting and on network
stopping thefor a long Inter-RAT
compressed
used as the measurement mode is kept quantity
performance,
compressed mode, set the Handover
time.
for inter-RAT measurement, the
If the InterRATMeasTime
difference between eventsis2D and WRFD- Based on Interval
Most
RNC sends the handovers
inter-RAT signaling tocan be
excessively
2F larger. low, the UE cannot 020303 Coverage Type -24~0 -24~0
finished
deactivate within 60 s.
compressed mode and
finish inter-RAT handovers. If
As
stopforinter-RAT
the impact on network if the
measurement, Inter-RAT
InterRATMeasTime is excessively Inter-RAT
performance,
UE reports the event 2F when the Handover
high, it cannot help improve the Handover
If the InterRATMeasTime
measured value is larger than is the WRFD- Based on Interval
service quality. In actual networks, Based on
excessively
value of this low, the UE cannot
parameter. 020303 Coverage Type -115~-25 -115~-25
statistics can be made to obtain the Service
finish inter-RAT handovers. If
delay for a successful inter-RAT WRFD- Inter-RAT
InterRATMeasTime is excessively
handover so as to get a proper 020305 Handover
high, it cannot help improve the
value of InterRATMeasTime that WRFD- Based on Interval
service quality. In actual networks,
satisfies most UEs. 020306 Load Type 0~512 0~512
statistics can be made to obtain the
delay for a successful inter-RAT Inter-RAT
handover so as to get a proper Handover
value of InterRATMeasTime that WRFD- Based on Interval
satisfies most UEs. 020303 Coverage Type 0~512 0~512
Inter-RAT
When it is checked, system Handover
supports inter-rat neighboring detect WRFD- Based on Enumerati
function. 020303 Coverage on Type OFF, ON OFF, ON
changed
This
modified parameter
compressed
slow fading, to periodical
according 2mode affects mode.
thelinkIfthe
tocompensation
sequence,the the
is prevented
reception level todB some
should
for extent.
not be The lower
handover
proportion
estimate
RSSI fails,
of
result.
measurement
of interferenceofnoise, the the UEs periodical
of ineight
and 2 dB for report
GSM
disadvantage
than -902D dBm, event-triggered
considering a margin
is triggered
compressed
Events
cells can beand only
mode
finished2F by the
active
are inthe internal
480 statusms, of a
compensation
report
of 3 dB mode
for is of
that
compensation
ambient
the event noise.
of is so
fast
NON_PERIODI
timer.
cell
the
The and
compressed
RSSI For
values the the
measurement
of cell-oriented
success
mode
inter-RAT start rate and
of of 16algorithm
handover the
stop
GSM hard Inter-RAT C_REPORT(No lower than
reported
Threshold
fading, 5 dB only to each once
trigger
for and inter-RAT cannot be
parameters,
handover.
switches.
cells
decision
changed can thresholds
be
to To
When setcompensation
finished
periodical the time
this vary the
inparameter,
cell iswith
1000
mode.
best
located
ms.
the
If
ofcellin
the Handover n periodical -110, -110~-
measurement
slow
is fading,
updated, 2
the with
dB measurement
for
inter-frequency compensation
you
the
handoverneed
center
According toof
to
policy.
fails, consider
the
thethe frequency
protocol,
To havethe
periodical following
notreport
UEs more
hand Based on reporting), 48(Actual
quantity
of interference
measurement of RSCP noise,
parametersfor PS
andUE domain
2should
dB forthe
be
factors:
coverage
than
over
is 32 the
only
triggered to speed
oronly
inter-RAT the
the GSM
by ofthe the
inter-frequency
neighboring
cellsinternal and
with cells
high Service D250~1 D500~2 value meets
non-HSDPA
compensation
updated accordingly.services.
of ambient noise.
cell
exist, radius.
measurement
quality,
timer. so
For youthe the quantity
canHSDPA set the inter-RAT is set to WRFD- Inter-RAT D1000~3 the condition:
For
The
For
BOTH,
PS
values
PS
domain
domain
Ec/No of cell-oriented
inter-RAT
HSPA
serves asservices,
the
algorithm
services,
handover Inter-RAT lower than
InterPeriodReportInterval
handover
parameters, decision
each threshold
time the can
best tobe a set 020305 Handover D2000~4 NON_PERIO
Actual Value
when
decision
-Periodical
when
decision
RSCP
Ec/No thresholds is
report
standard
used
isneighboring
used mode
for
as
vary
as events
the
thewith2D thecelland Handover -110, -110~-
to
is 2000
comparatively
updated,
measurement ms if
the high value,
inter-frequency
quantity for GSM
for
inter-RAT cells WRFD- Based on Interval D3000~5 DIC_REPOR
= GUI Value -
handover
When
measurement
2F. If the
you policy.
quality
want quantity
to To
of
start have
the GSM
for
the UEs
inter- cellhand Based on 48(Actual
exceeds
example 16.
measurement
measurement, -85 dBm. parameters
the RNC sendsshould the be 020306 Load Type D4000~6
0~63 T, 250, 500,
111)
over
reported onlyby tomeasurement,
the
the GSM
UE is cells
higher with high Service value meets
frequency
compressed
This parameter
updated
signaling accordingly.
to
mode
activate has earlier,
impact
compressed
the onthan
set RNC
the
the D6000~7 1000, 2000,
quality,
the
sends inter-RATyou
the can
signaling event set2D the
2Dstop inter-RAT
absolute WRFD- Inter-RAT the condition:
threshold
Uu
mode signaling
and+
for
start
event
flow. If to
inter-RAT the larger;
interval theif you is D8000~8 3000, 4000,
handover
threshold
compressed
want to reduce decision
hysteresis,
mode threshold
and
thefrequency
ping-pong it
thestarts toeffect
inter- a
the 020305 Handover Actual Value
too short
-Periodical
measurement, and report the mode
if theIfvalue, UE reports is toothe D12000~9 6000, 8000,
Threshold
comparatively
delay
frequency
of startingtrigger of timer.
Inter-RAT
high
measurement,
and stopping thehandoveriffor
quality
the thecell UE ofin WRFD- Based on Interval = GUI Value -
high,
When
event the
the
2D RNCquality
when maythe have
of measured
thechannel GSMburden value D16000~10 12000,
failure
example
the
reportsGSM
compressed due -85
cell
event to physical
dBm.
satisfies
2F
mode, when set the
the
the 020306 Load Type 0~63 111)
Inter-RAT
processing
reported
is smaller by ping-pong
thansignaling.
the UE
the value hysteresis.
is Ifhigher the interval
than
ofInter-RAT
this D20000~11 16000,
failure.
requirement
measured
difference When value the
throughout istimes
larger of
the
than duration
the
When
is
the too a UEbetween
long,
inter-RAT
parameter. in
the the
network
event CS events
2D domain
cannot
absolute 2D and
is Inter-RAT D24000~12 20000,
handover
of the
value
2F timer,
of
larger. thisfailures
the
parameter. due tostarts
system physical theto a Inter-RAT
handed
detect
threshold
If you want theover signal
+ to from
hysteresis,
start a
change
the 2G network
in
itthe time,
starts the
compressed Handover D28000~13 24000,
channel
inter-RAT
If the cell failure
ishandover
athe macroexceeds after itthe time-3A Handover
Events
3G
which
delay
mode network,
threshold,
may2D
trigger
earlier, UE
and
delay timer.
set
2F
will
system
the
the
beIf cell,
are the the
inter-RAT
threshold
turned
indicates
inter-RAT
increase
quality intofor of WRFD- Based on
Based on
Enumerati D32000~14 28000,
out.
that
handovermicro
measurement
Hysteresis cells
andto exist
start
prevent
thus and
cause inUE this
stop cell.
ping-pong
call drops.To 020303 Coverage on Type D64000 32000, 64000
the
event GSM 2D cell
larger. satisfies the
Inter-RAT
penalty
The
enable GSM
switches,
handover
state.
the ping-pong
cells
thattraffic
between
And
is,ofOtherwise,
which
absorption
the the
timer.
nointer-RAT
trythe
2G
set
of Inter-Rat
BSIC
function
the Service
requirement
threshold
When
handover a UE for
will throughout
in event
be the CS
taken2D domainthenetwork
smaller;
until duration
is
penalty if WRFD- Inter-RAT
canthe
of be
compressed
and the decoded
micro
3G cells,
mode use the incomparatively
start compressed
and stop
of
you the
handed want
finishes.
shorter
timer,
over
delayto network
the
reduce
from
trigger
system
a the 2G
time
the startsperiod
ping-pong
network
to achieve
theto a 020305 Handover
mode
switches.
specified
inter-RAT start by threshold
Because this
handover parameter. should
different
after the be
service
During
time- set
effect
3G
Also
a higherseeof
network, starting
parameter
priority. the and
system
The stopping
GSM cellsincrease the 3A WRFD- Based on Interval
higher
types
the
out. may
penalty and the
have
time, stopdifferent
the threshold
previous beofset
compressed
Hysteresis
which the tomode,
PenaltyTimeForInterRatPhyChFail.prevent setUE theping-pong 020306 Load Type 0~63 0~63
lower,
requirements
periodical
The GSM thatBSIC is,
report
cells the
on isthe
ofwill
not
threshold
which
verified
signal
be changed for use
quality
thenetwork
BSIC event
to
difference
handover
comparatively between
between longerby theevents
delay2G 2D
triggerand
2D/2F
and
the
can event
be be
different
decodedset
3A higher
inter-RAT
report. use If using
handover
this
comparatively CPICH Inter-RAT
2F
and
time larger.
the 3G network
to achieve a lower in the period
priority and
RSCP.
policies
parameter
shorter to be is 0,theused, the
system inter-RAT
towill not Handover
In most delay
specified
decode cases,
the by trigger
this
BSIC. UEs parameter. time
want to achieve
be
During
If the
measurement
start cellping-pong
the is a micro start orcell, stop it indicates
a higher
maintained
the
If the penalty priority.
handover within
time,value The
the
fails, a handover
3G GSM
previousnetwork.
reattempt
cellspunish of WRFD- Based on Interval 0~7.5,
that
which the
thresholds
timer. the default are distinguished
BSIC is not should
verified be
by use CS, 020303 Coverage Type 0~15 step:0.5
Thus,
periodical
according the start
report threshold
to the inter-RAT will be of
changed the inter-
to
modified
PS, according
and signaling
comparatively longer todelay
services. the link trigger
RAT
the measurement
event
measurement 3A report.
period is If set
this smaller Inter-RAT
estimate
If youtowant
time result.
achieve to start a lower thereport. compressed
priority and
than
parameter
The that
advantage ofisthe 0,the inter-frequency
of system
the periodical will not Handover
Events
mode
decode 2D
earlier,
the and
BSIC.set 2F theare the
threshold for
measurement.
start
report the mode ping-pong is This
that facilitates
ithandover
can repeatedly the
punish WRFD- Based on Interval
compressed
event
If 2D
the handover larger; mode if start
you wantand stop
to
triggering
timer.
perform the thefails,
of handover reattempt
inter-frequency retry on 020303 Coverage Type 0~65535 0~65535
switches.
reduce the
according When
to ping-pong
the the
inter-RAT cell effectis locatedof the in
handover.
same cell For
when scenarios
the handover wherefails, no
the center
starting
measurement and of the
stopping
period frequency the
report. cells or Inter-RAT
inter-frequency
and that the followingneighboring
coverage
compressed
The advantage or the mode, of the setalgorithms
inter-frequency the
periodical Handover
where
can beinter-frequency
flexibly developed. coverage In is
measurement
difference
report modethe between quantity
that it can set
is inter-RAT events is 2Dtoand
repeatedly WRFD- Based on Interval
not ample,
addition, for the cell-oriented
BOTH,
2F larger.
perform Ec/No
thetohandover serves asretry theon the 020303 Coverage Type -24~0 -24~0
Threshold
measurement stop
startinter-RATthreshold should
algorithm
decision parameters,
standard forhandover the RNC
events 2D and
same
measurement
be set cell when
relatively with the
largermeasurement so as to fails, Inter-RAT
updates
2F. If you the want parameters
to start the when
and
quantitythat of
facilitate theRSCP following
triggering for PS algorithms
of domain
inter-RAT Handover
performing internal
compressed mode handover
earlier, set the
can be flexibly
non-HSDPA
measurement. developed.
services.
Thus, call dropsIn WRFD- Based on Interval
decision
threshold andfor the
event system needs not
addition,
For
reduce.PS domain for the non-HSDPA cell-oriented if you
2D larger;
020303 Coverage Type -115~-25 -115~-25
to
wantinformto reduce the UEs of
the ping-pong the parameter effect
algorithm
services, when parameters, RSCP is theused RNC as the
change
of starting throughand signalingthe
stopping messages Inter-RAT
updates the parameters
measurement quantity for inter-RAT when
after
compressedthe handovers. mode, handover The
set the Handover
performing
measurement, internal the RNC sends the
disadvantage
difference between of theevents periodical 2D and mode WRFD- Based on Interval
decision
signalingand the system
to deactivate needs
compressed not
is
2F that
larger. it requires large amount of 020303 Coverage Type -24~0 -24~0
to
modeinform andthe stop UEs of the parameter
inter-RAT
signaling and increases the load on
change
measurement, throughif signaling the UE reports messages the Inter-RAT
the air interface and for signaling
after
eventthe 2F handovers.
when the measured The value Handover
processing.
disadvantage
is larger than the of the value periodical
of this mode WRFD- Based on Interval
Both modes (the periodical mode PERIODICAL_R
is that it requires large amount of
parameter. 020303 Coverage Type -115~-25 -115~-25
and the event report mode) have EPORTING(Peri PERIODICAL
signaling and increases the load on
advantages and disadvantages. Inter-RAT odical reporting), _REPORTIN
the air interface and for signaling
Currently, the traditional periodical Handover EVENT_TRIGG G,
processing.
report mode is most commonly WRFD- Based on Enumerati ER(Event EVENT_TRIG
Both modes (the periodical mode PERIODICAL_R
used. 020303 Coverage on Type trigger) GER
and the event report mode) have EPORTING(Peri PERIODICAL
advantages and disadvantages. Inter-RAT odical reporting), _REPORTIN
Currently, the traditional periodical Handover EVENT_TRIGG G,
report mode is most commonly WRFD- Based on Enumerati ER(Event EVENT_TRIG
used. 020303 Coverage on Type trigger) GER
Fn:
the lastthe updated
attempt before filteredcall drop.
best
threshold cell ofofthe cell active
for judging set reports whether
measurement
The emergency result
blind handover is a
event
uplink 1F,
MBDR which means of
algorithm that theRAT
inter
Fn
special- 1: the occasionold filtered measurement
that requires on-
active
is cell is very
in measurements
overload state. poor quality, then
It represents
result
site on the scope the of
the blind
percentage handover
of the is
cell triggered
admission as
Mn: the latest received
the pilot strength and quality of the
the
control last attempt before call The drop.
best cellthreshold
measurement at theresult of uplink.
location from physical
where the
The
smaller emergency
this parameter blind handover is, the is a
earlier
layer
blind
This measurements
handover
parameter is triggered.
isthat
used to increase
special
uplink occasion
MBDR algorithm requires
of inter on-
RAT
When
Generally,ofainter-RAT
timemeasurements is setthisto 1,reselection.
function this meansneed not ItL3
isbe
site
goes into on theWhen scope of
filtering
started,
not sooverload
will
configured not parameter
the when
state.
be applied. its valueis set is
cell
to {1~4.75},
the
load pilot strength
is higher than and the quality
product of the
of L3
The
255. input
the lowestFor at measurement
value
detailed by default,
information, value to
best
uplink cell
cellbeen the location
admission where refer
control the WRFD- Intra RNC Interval {255},
filter
indicating
to 3GPP has that
TS 25.304. filtered
the blind by L1
handover filter, is 010801 Cell Update Type 4~19,255 step:0.25
blind
threshold handover is triggered.
where
not triggered.theand impact this of parameter,
fast fadingand is is
Generally,
lower than this
the set function
uplink need not be
almost
The larger eliminated.
the Socell
value theis,admission
L3 thefiltering
more Inter-RAT
started,
control so the parameter
threshold, uplink MBDRis set to Handover
should
easily the apply event smooth 1F can filtering
be to
the lowestof
algorithm
Indicating value
inter
whether by
RAT default,
the is inamount
intra- overload WRFD- Based on Interval
shadow
triggered.fading The and
smaller small the set value of
indicating
state.
frequency that the
measurement blind handover
control is 020303 Coverage Type 0~100 0~100
remaining
is, the more fast fading, the
difficultly thus the 1F
event
not triggered.
information shouldFor bethe delivered
filtered
can be measurement
triggered. value can
definition
The
through larger the the set value
system is, the more
reflect
of
Time event the
span 1F, varying
refer to
before ofinformation.
the the
3GPP actual
command TS is Security
easily
Generally the eventthe 1F can bedeliver the
measurement
25.331.
executed.
triggered. Thecell
The logsshould
value,
smaller
and provide
generated
the set value within MRFD- Managemen Interval
intra-frequency
more
As
the for
timereliable
thespan impact are measurement
measurement
onto network
be exported.value 210305 t Type 1~240 1~240
is, the more
control information.difficultly the event 1F
for event
performance: judgement.When the intra-
can
frequencybe triggered.
measurement For the control definition
As
Thefor the impact
higher the threshold on network is, the
of event
information 1F, refer to 3GPP TS
more easily (the
performance: the event preconfiguration
1F can be of
25.331.
Interval
the for
measurement sending packets
control) is to test WRFD- Ethernet Interval
larger the
triggered. Thevalue lowerof the thisthreshold Intra RNC
As for theOAM
Ethernet
delivered impact
in the loop on networkUE can
system, 050425 OAM Type 1~10 1~10
parameter, the stronger
is, the more difficult the event 1F the Softer
performance:
start thetriggered.
intra-frequency
smoothing
can be effect and In real thesituations,
higher the WRFD- Handover
The higher theand
measurement threshold
send is, the
the
anti-fast-fading
the threshold can capability,
be adjusted but the 020202 Inter RNC
more
measurement easily thereport eventimmediately
1F can be
lower
according the signalto the tracing handover capability,
strategy WRFD- Soft Interval
triggered.
after it enters TheCELL_DCH
lower the threshold state, and Intra RNC
the
and
This greater
network
parameter the possibility
coverage.
specifies thecall
of intra- 020203 Handover Type -24~0 -24~0
is,
the the
softmorehandover difficult can thebeevent more1F Softer
drops.
frequency If the value
measurement of this parameter
quantity. It
can
quickly be triggered.
finished byInthe real UE situations,
to avoid WRFD- Handover
is too small,
defines the unnecessary
reference soft
measurement
the
call threshold
drops or when canthe beUE adjusted
is in the soft 020202 Inter RNC
handover
quantity fortothe the ping-pong
according area. theUE The
to reportstrategy
handover event WRFD- Soft Interval
handover
1x. For events may occur.
1A, 1B, 1C, and 1D Intra RNC
and network
preconfiguration coverage. of measurement 020203 Handover Type -115~-25 -115~-25
Note
which that
adopt thisrelative
parameter has great Softer D0, D1, D2, D3,
Identifying the periodthresholds, of the Intra-the
control
impact canthe
on enable
overall theperformance
UE in the soft WRFD- Handover D4, D5, D6, D7, 0, 1, 2, 3, 4,
measurement quantity
frequency load balance algorithm. does not
handover
of the handover, area toso implement
you softbe
have
Whengreat the cell impactloadon theshould
is high, threshold
the cell
020202 Inter RNC D8, D9, D11, 5, 6, 7, 8, 9,
handovers
cautious whenmore quickly to
adjusting this decrease WRFD- Soft Enumerati D13, D15, D17, 11, 13, 15,
values.
PCPICHFor TXevent power1F canwhich be adopts
the call drop rate. With the
parameter. 020203 Handover on Type D19 17, 19
absolute
periodically threshold,
reducedthe in order to
preconfiguration function, the UEs in
measurement
enable users inquantity connected should mode be to
set Intra
the single signaling state perform
based
be switched on theover reality of thecells
to other cell. more
If the Frequency
soft handovers in a higher
cell
easily, is located
thus reducing in the center the local of thecell WRFD- Load Interval
probability. If the CN delivers the
coverage
load. area, the main factor that 020104 Balance Type 1~86400 1~86400
RAB assignment before a soft
affects signal quality is intra-
handover is complete, the delay of
frequency interference. In this case,
UE service setup may increase. For Load REQUIRE,
CPICH_EC/NO is recommended. If
When
details,it refer is checked, to the 3GPP system TS 25.331 WRFD- Measureme Enumerati REQUIRE, NOT_REQUI
the cell is located at the border of Intra RNC
supports
protocol. intra-frequency 020102 nt on Type NOT_REQUIRE RE
the coverage area, the main factor Softer
neighboring detect function.
that affects signal quality is the WRFD- Handover CPICH_EC/N
DETSET_RPRT_SWITCH switch in
distance between the cell and the 020202 Inter RNC O,
HoSwitch in SET
base station. In this case, WRFD- Soft Enumerati CPICH_EC/NO, CPICH_RSC
CORRMALGOSWITCH can also Intra RNC
CPICH_RSCP is recommended. 020203 Handover on Type CPICH_RSCP P
start the intra-frequency neighboring Softer
detect function. Either switch is WRFD- Handover
checked, the RNC starts the intra- 020202 Inter RNC
frequency neighboring detect WRFD- Soft Enumerati
function. 020203 Handover on Type OFF, ON OFF, ON
Load Based
handover
enhanceme
Indicating whether the Neighboring WRFD- nt on Iur-g Enumerati TRUE,
BSC is in the same BSC6900. 071101 (3G to 2G) on Type FALSE, TRUE FALSE
dB)
event during
1A andsiteeventdeployment,
1B, and to
active
You can
coefficient,setsetisandat least
different isyouIncan
2)relative
hysteresis.
performance:
reduce
curb it thesetting
by threshold a thesome
whenrelative
higher
approximately
thresholds
specific
The value forthis
applications,
of 35%.
event It
ifisthe
1A
parameter andping-
event
users
threshold increase.
for event But the
1B andthreshold
lower
recommended
1B
pong to
determines reduce
effect the
cannot
the to
SHOset
be the
ping-pong
curbed
area relative
effect
and by
the
must
that forbeevent
higher1A. than 3 dB to avoid
threshold
and the
adjusting
SHOping-pong soft
ratio. aThe
the little
handoverhigherratio.
hysteresis
higher (5values
the dB Into for
threshold7
the
As for the impact handover.
on network
dB)
general
event
is, theduring
1A
more andsite
applications, deployment,
event
easily the
1B,
the you
target and
relative
can
cell to
You can set different relative
performance:
reduce
thresholds
curb
joins it
the the
by threshold
for
setting
active eventa
set, when
1A
higher
the and the
1Bthe
relative
harder
thresholds
The value forthis
of event 1A and event
parameter
users
should
threshold
call increase.
drops,be forconsistent,
theevent But
larger the
1B and
theandthreshold
you
lower
ratio can
of the
1B to
determines reduce the the ping-pong
SHO area effect
and the Cell ID +
must
curb
that
UE forbe
the higher
ping-pong
event
involved in 1A.than
soft 3
effectdB
handover to avoid
through
is, but
and
SHO the softThe
ratio. handover
higher ratio. In
the threshold RTT
the
As ping-pong
time-to-trigger,
the for
more the impact
the handover.
use ofL3
on filtering
network
forward
general
is, the applications,
more easily the the relative
target cell WRFD- Function Interval 0~14.5, step:
You can set
coefficient,
performance:
resources and
is. different relative
hysteresis. the In1B some
thresholds
joins
Relative the forThe
active
threshold event lower
set,of 1A
the
the and
harder
event the
1A. 020801
Intra RNC
Based LCS Type 0~29 0.5
thresholds
specific
The value
threshold for
applications,
of
is, event
this
the 1A
parameter
more and
ifdifficult
the ping-event
the Softer
should
call drops,be consistent,
the larger andratio
the youof can
the
1B to
pong effect
determines
target reduce the
cellping-pong
joins the
cannot ping-pong
the be
SHO curbed
area
active effect
andby
set. the
Thus WRFD- Handover
curb
UE the
involved effect
inhysteresis
soft handover through
is,for
but
and the
adjusting
SHO
the soft
the handover
ratio. The higher ratio.
valuesIn
the threshold
the communication
the time-to-trigger,
more the use
quality
ofL3 filtering
forward
and the 020202 Inter RNC
general
event
is, the 1A
smooth applications,
more andeasily
handover event the the
1B,
cannot relative
you
targetbeIncan
cell WRFD- Soft Interval 0~14.5,
coefficient,
resources and
is. hysteresis. some
thresholds
curb
joins itthe
guaranteed. byactiveforThe
setting eventalower
set, higher
the
the
1A harder
and 1Bthe
relative 020203
Intra RNC
Handover Type 0~29 step:0.5
specific
threshold applications, if the ping-
should
threshold
call drops,be is,
for
the
the
consistent,
event more
larger 1Bthedifficult
and
and you
lower
ratio
the
can
of the
Softer
pong
target effect
cell cannot
joins the be curbed
active set. by
Thus WRFD- Handover
curb
that
UE the ping-pong
for eventin1A.
involved soft effect
handover through
is, but
adjusting
the the hysteresis
communication quality values
and thefor 020202 Inter RNC
the
As fortime-to-trigger,
more thethe impact on ofL3 filtering
network
event
smooth anduse
1Ahandover event forward
1B, you
cannot be can WRFD- Soft Interval 0~14.5,
coefficient,
performance:
resources and
is. The hysteresis. In some
curb it by setting
guaranteed. alower
higher therelative 020203
Intra RNC
Handover Type 0~29 step:0.5
specific
The value
threshold applications,
of the
is, thismore ifdifficult
parameter the ping- the Softer
threshold for event 1B and lower
pong
determines
target effect
cell cannot
the
joins SHO
the be curbed
area
active andby
set. the
Thus WRFD- Handover
that for event 1A.
adjusting
SHO
the ratio.the The hysteresis
higher the values for
threshold
As for the impact on network the
communication quality and 020202 Inter RNC
event
is, the
smooth 1A
more and event
easily
handover cannot be 1B,
the you
target can
cell WRFD- Soft Interval 0~14.5,
performance:
curb
joins itthe
guaranteed. byactive
settingset, a higher
the harder relativethe 020203 Handover Type 0~29 step:0.5
The value of this parameter
threshold
call drops,for theeventlarger1Bthe and lower
ratio of the
determines the SHO area and the Cell ID +
that for eventin1A.
UE involved soft handover is, but
SHO ratio. The higher the threshold RTT
As for
the more thethe impact use on network
of forward
is, the more easily the target cell WRFD- Function Interval 0~14.5, step:
performance:
resources is. The lower the Intra RNC
joins
Relative the threshold
active set,ofthe theharder
event the 1B. 020801 Based LCS Type 0~29 0.5
The value
threshold of the
is, thismore
parameter
difficult the Softer
call drops, the larger the ratio of the
determines
target cell joins the SHO area set.
the active and Thus
the WRFD- Handover
UE involved in soft handover is, but
SHO ratio. The higher
the communication the threshold
quality and the 020202 Inter RNC
the more the use of forward
is, the more
smooth handover easilycannot
the target be cell WRFD- Soft Interval 0~14.5,
resources is. The lower the Intra RNC
joins the active set, the harder the
guaranteed. 020203 Handover Type 0~29 step:0.5
threshold is, the more difficult the Softer
call drops, the larger the ratio of the
target cell joins the active set. Thus WRFD- Handover
UE involved in soft handover is, but
the communication quality and the 020202 Inter RNC
the more the use of forward
smooth handover cannot be WRFD- Soft Interval 0~14.5,
resources is. The lower the Intra RNC
guaranteed. 020203 Handover Type 0~29 step:0.5
threshold is, the more difficult the Softer
target cell joins the active set. Thus WRFD- Handover
the communication quality and the 020202 Inter RNC
smooth handover cannot be WRFD- Soft Interval 0~14.5,
guaranteed. 020203 Handover Type 0~29 step:0.5
CN flow control timer (long). If the
OVERLOAD message is not
received in this period, the traffic 3GPP
volume will be increased by a WRFD- Specificatio Interval 15000~12000
degree. 010101 ns Type 15000~120000 0
Interval for executing the scheduled
subtask. If the time mode is set to
"DAILY_C", "WEEKLY_C", or
Automatic switchover interval. This
"MONTHLY_C", you should set this Interval
parameter needs to be set only
parameter. None None Type 1~1440 1~1440
when "OMU automatic switchover
switch" is set to "ON". The minimum
automatic switchover interval is 30
days and the maximum automatic Interval
switchover interval is 1024 days. None None Type 30~1024 30~1024
IP Address 0.0.0.0~255.2
IP address of the server None None Type None 55.255.255
IP
Transmissio
The local IP address must be the n
configured IP address (including the Introduction
IP address and port address of the WRFD- on Iub IP Address 0.0.0.0~255.2
interface board). 050402 Interface Type None 55.255.255
IP Address 0.0.0.0~255.2
Local IP address of the IPoA PVC None None Type None 55.255.255
IP-Based
2G/3G Co-
Transmissio
MRFD- n on MBSC IP Address 0.0.0.0~255.2
IP address of the board 211502 Side Type None 55.255.255
IP Address 0.0.0.0~255.2
Local IP address None None Type None 55.255.255
IP-Based
2G/3G Co-
Transmissio
Local IP address of the Ethernet MRFD- n on MBSC IP Address 0.0.0.0~255.2
port 211502 Side Type None 55.255.255
IP Address 0.0.0.0~255.2
IP address of the next hop None None Type None 55.255.255
IP Address 0.0.0.0~255.2
No_HC(No_HC),
local IP address of the IPoA PVC None None Type None 55.255.255
UDP/IP_HC(UD
P/IP_HC), No_HC,
RTP/UDP/IP_H UDP/IP_HC,
Whether to compress the packet Enumerati C(RTP/UDP/IP_ RTP/UDP/IP_
No_HC(No_HC),
headers None None on Type HC) HC
UDP/IP_HC(UD
P/IP_HC), No_HC,
RTP/UDP/IP_H UDP/IP_HC,
Whether to compress the IP header Enumerati C(RTP/UDP/IP_ RTP/UDP/IP_
of a MP group None None on Type HC) HC
FP MUX for
Number of the logical port for the
IP
NodeB operation and maintenance WRFD- Interval
Transmissio
channel in the IP transmission mode 031101 DHCP Type 0~988 0~988
n
WRFD- UDP MUX
050420 for Iu-CS
WRFD- Transmissio Interval
IP packet multiplex index 050412 n Type 0~12999 0~12999
Slot number of the BSC6900
interface board interworking with
NodeB when the NodeB operation
and maintenance channel works in WRFD- Interval
the IP transmission mode 031101 DHCP Type 0~5,8~27 0~5, 8~27
Subrack number of the BSC6900
interface board interworking with
NodeB when the NodeB operation
and maintenance channel works in WRFD- Interval
the IP transmission mode 031101 DHCP Type 0~11 0~11
Hybrid Iub SUPPORT(Supp
Indicating whether the UE allocated
IP ort), SUPPORT,
with Access Class 0 can be allowed
Indicating whether the Iub interface WRFD- Transmissio Enumerati NOT_SUPPORT NOT_SUPPO
to initiate access to the radio
supports IP hybrid transport. 050403 n on Type (Not support) RT
network. The UE judges whether it
Indicating whether the UE allocated
belongs to this access class based
with Access Class 10 can be
on the SIM/USIM. For detailed Access BARRED,
allowed to initiate access to the
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
radio network.The UE judges
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
whether it belongs to this access
Indicating whether the UE allocated
class based on the SIM/USIM. For
with Access Class 11 can be
detailed information of this Access BARRED,
allowed to initiate access to the
parameter, refer to 3GPP TS WRFD- Class Enumerati BARRED, NOT_BARRE
radio network.The UE judges
25.331. 021103 Restriction on Type NOT_BARRED D
whether it belongs to this access
Indicating whether the UE allocated
class based on the SIM/USIM. For
with Access Class 12 can be
detailed information of this Access BARRED,
allowed to initiate access to the
parameter, refer to 3GPP TS WRFD- Class Enumerati BARRED, NOT_BARRE
radio network. The UE judges
25.331. 021103 Restriction on Type NOT_BARRED D
whether it belongs to this access
Indicating whether the UE allocated
class based on the SIM/USIM. For
with Access Class 13 can be
detailed information of this Access BARRED,
allowed to initiate access to the
parameter, refer to 3GPP TS WRFD- Class Enumerati BARRED, NOT_BARRE
radio network.The UE judges
25.331. 021103 Restriction on Type NOT_BARRED D
whether it belongs to this access
class based on the SIM/USIM. For
detailed information of this Access BARRED,
parameter, refer to 3GPP TS WRFD- Class Enumerati BARRED, NOT_BARRE
25.331. 021103 Restriction on Type NOT_BARRED D
Indicating whether the UE allocated
with Access Class 14 can be
allowed to initiate access to the
radio network.The UE judges
whether it belongs to this access
Indicating whether the UE allocated
class based on the SIM/USIM. For
with Access Class 15 can be
detailed information of this Access BARRED,
allowed to initiate access to the
parameter, refer to 3GPP TS WRFD- Class Enumerati BARRED, NOT_BARRE
radio network. The UE judges
25.331. 021103 Restriction on Type NOT_BARRED D
whether it belongs to this access
class based on the SIM/USIM. For
Indicating whether the UE allocated
detailed information of this Access BARRED,
with Access Class 1 can be allowed
parameter, refer to 3GPP TS WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
25.331. 021103 Restriction on Type NOT_BARRED D
network.The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 2 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network. The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 3 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network. The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 4 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network. The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 5 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network. The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 6 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network. The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 7 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network.The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 8 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network.The UE judges whether it
belongs to this access class based
Indicating whether the UE allocated
on the SIM/USIM. For detailed Access BARRED,
with Access Class 9 can be allowed
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
to initiate access to the radio
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
network.The UE judges whether it
ATM QoS
belongs to this access class based
Introduction
on the SIM/USIM. For detailed Access BARRED,
on Hub
information of this parameter, refer WRFD- Class Enumerati BARRED, NOT_BARRE
NodeB
to 3GPP TS 25.331. 021103 Restriction on Type NOT_BARRED D
(Overbookin
g on Hub
Node B
Whether to indicate the first class WRFD- Transmissio Enumerati NO(NO),
transport resource group 050406 n) on Type YES(YES) NO, YES
This parameter specifies whether 3.4/6.8/13.6
the MAC-hs window size is fixed. /27.2 kbit/s
- If this parameter is set to TRUE, RRC
the MAC-hs window size is fixed. Connection
- If this parameter is set to FALSE, WRFD- and RAB Enumerati FALSE,
the MAC-hs window size is flexible. 010510 Assignment on Type FALSE, TRUE TRUE
primary operator flag. YES indicates
to activate the license of the primary
FP MUX for
operator, and NO indicates to License
IP
activate the license of the MRFD- Managemen Enumerati NO(NO),
Transmissio
secondary operator. 210403 t on Type YES(YES) NO, YES
n
WRFD- UDP MUX
050420 for Iu-CS
WRFD- Transmissio Enumerati NO(NO),
Dynamic
Whether it is QOSPATH 050412 n on Type YES(YES) NO, YES
AAL2
Connections
Whether to indicate it is the root in NO(Not Root
node when the transport type is WRFD- Iub/IuCS/Iur Enumerati Node),
ATM or ATM_IP 05030104 Interface on Type YES(Root Node) NO, YES
Configuratio
IUB(Iub
When the Iu interface is faulty, the n
Interface),
RNC gradually
Whether restricts
to support cell access
the FRA (E1/T1 MRFD- Managemen Enumerati NO(NO),
IUR(Iur
in Bar relay
frame mode.interface
When the Iu interface
board) 210301 t on Type YES(YES) NO, YES
Interface),
is restored, the RNC gradually
IUCS(Iu-CS
enables cell access in Not Bar
Interface),
mode. This parameter defines the
Enumerati IUPS(Iu-PS IUB, IUR,
interval between the cell working in
Type of the adjacent node None None on Type Interface) IUCS, IUPS
Bar mode and in Not Bar mode. In
this way, the location update
procedure can be distributed to a Access
specified time period and the risk WRFD- Class Interval
due to congestion is reduced. 021103 Restriction Type 1~3600 1~3600
Meaning: Number of RABs selected
in one DL traffic release. One RAB
represents one service of a single WRFD- Overload Interval
user. 020107 Control Type 0~10 0~10
3GPP
WRFD- Specificatio Interval
A timer to Iu CS Release protection 010101 ns Type 1~65535 1~65535
Maximum traffic rate for restriction in
the case of congestion on the IU
interface. This parameter is valid WRFD- Flow Interval
only when "Board Class" is "XPU". 040100 Control Type 0~100 0~100
SRNS
Whether to control the traffic on the WRFD- Flow Enumerati
Relocation
Iur downlink 040100 Control on Type ON, OFF ON, OFF
Introduction
WRFD- Package
020605 Inter RNC
Indicates whether to config WRFD- Soft Enumerati TRUE,
CPU usage threshold for Iur-g
neighbouring RNC's DSP index. 020203 Handover on Type TRUE, FALSE FALSE
interface control. When the average
CPU usage of sliding windows
reaches or exceeds the threshold,
resource auditing control is WRFD- Flow Interval
Packet queue usage threshold for
triggered. 040100 Control Type 30~100 30~100
Iur-g interface. When the average
packet queue usage of sliding
windows reaches or exceeds the
threshold, Iur-g interface flow control WRFD- Flow Interval
is triggered. 040100 Control Type 30~100 30~100
CPU usage threshold for recovery
from Iur-g interface control. When
the average CPU usage of sliding
windows is lower than the threshold, WRFD- Flow Interval
Packet queue usage threshold for
Iur-g interface control is stopped. 040100 Control Type 30~100 30~100
recovery from Iur-g interface. When
the average packet queue usage of
sliding windows is lower than the
threshold, Iur-g interface control is WRFD- Flow Interval
stopped. 040100 Control Type 30~100 30~100
Whether to control traffic on the Iur- WRFD- Flow Enumerati
g interface 040100 Control on Type ON, OFF ON, OFF
NULL, 1byte,
Enumerati NULL, 1byte, 16byte,
Expected receiving type of J0 None None on Type 16byte, 64byte 64byte
Expected receiving value of J0. J0
byte, also called the trace byte of
the regenerator section on the
optical port (RTIM), is one of the
optical port interconnection
parameters. The BSC receives the String 0~124
peer J0 byte continuously. None None Type None characters
Hexadecimal(He
x decimal),
Character_Strin Hexadecimal,
Enumerati g(Character Character_Str
Sending value
Byte display of J0.ofJ0
format J0byte, also None None on Type String) ing
called the trace byte of the
regenerator section on the optical
NULL, 1byte,
port (RTIM), is one of the optical
Enumerati NULL, 1byte, 16byte,
port interconnection parameters that
Sending type of J0 None None on Type 16byte, 64byte 64byte
is continuously transmitted to the
peer end. This parameter enables
the peer end to check whether it is
connected to the local end String 0~124
continuously. None None Type None characters
NULL, 1byte,
Enumerati NULL, 1byte, 16byte,
J0 type None None on Type 16byte, 64byte 64byte
Hexadecimal(He
x decimal),
Character_Strin Hexadecimal,
Enumerati g(Character Character_Str
Byte display format of J1 None None on Type String) ing
Hexadecimal(He
x decimal),
Character_Strin Hexadecimal,
Enumerati g(Character Character_Str
Byte display format of J1 None None on Type String) ing
NULL, 1byte,
Expected receiving value of J1. J1
Enumerati NULL, 1byte, 16byte,
byte, also called the trace byte of
Expected receiving type of J1 None None on Type 16byte, 64byte 64byte
the high-order path on the optical
port, is one of the optical port
interconnection parameters. The
local end continuously receives the String 0~124
peer J1 byte. None None Type None characters
Hexadecimal(He
x decimal),
Character_Strin Hexadecimal,
Enumerati g(Character Character_Str
Byte display format of J1 None None on Type String) ing
Sending value of J1. J1 byte, also
called the trace byte of the high-
NULL, 1byte,
order path on the optical port, is one
Enumerati NULL, 1byte, 16byte,
of the optical port interconnection
Sending type of J1 None None on Type 16byte, 64byte 64byte
parameters transmitted to the peer
end continuously. This parameter
enables the peer end to check
whether it is connected to the local String 0~124
end continuously. None None Type None characters
NULL, 1byte,
Enumerati NULL, 1byte, 16byte,
J1 type None None on Type 16byte, 64byte 64byte
ATM over
Channelized
STM-1/OC-
Switch for the J2 tracing mark WRFD- 3 on Iub Enumerati OFF(OFF),
mismatching alarm 05030102 Interface on Type ON(ON) OFF, ON
ATM over Hexadecimal(He
Channelized x decimal),
STM-1/OC- Character_Strin Hexadecimal,
WRFD- 3 on Iub Enumerati g(Character Character_Str
Byte display format of J2 05030102 Interface on Type String) ing
ATM over
Channelized NULL,
STM-1/OC- NULL, 1BYTE, 1BYTE,
WRFD- 3 on Iub Enumerati 16BYTE, 16BYTE,
Byte length of J2 05030102 Interface on Type 64BYTE 64BYTE
ATM over
Channelized
STM-1/OC-
WRFD- 3 on Iub String 0~64
Expected receiving value of J2 05030102 Interface Type None characters
ATM over
Channelized
A zero or a space used to fill in the J
STM-1/OC-
byte of the optical port based on the
WRFD- 3 on Iub String 0~64
J byte of the peer equipment. If the
Sending value of J2 05030102 Interface Type None characters
J bytes are inconsistent, an alarm
related to J byte mismatch will be
reported and the negotiation of the
NOT-INDICATE-
optical port may fail, thus leading to Enumerati ZERO(zero), ZERO,
END(NOT-
deterioration of the services. None None on Type SPACE(space) SPACE
INDICATE- NOT-
END), INDICATE-
Determines whether the last three INDICATE- END,
bits of K2 indicates the single end Enumerati END(INDICATE- INDICATE-
and the dual end None None on Type END) END
ATM/IP
WRFD- Dual Stack Interval
Path load EQ threshold table index 050404 Node B Type 1~63 1~63
RAN
Bronze user load EQ index used by WRFD- Sharing Interval
the current adjacent node 021305 Phase 2 Type 0~63 0~63
RAN
Gold user load EQ index used by WRFD- Sharing Interval
the current adjacent node 021305 Phase 2 Type 0~63 0~63
Logical function type of the board
OAM:Operation And Maintenance
Process
UCP:All the UCP subsystems are
configured as CPUS to act as the
control plane processing
subsystems for UMTS BSC
RUCP:Subsystem 0 of RUCP is RAN
Silver user as
configured load EQ
the index
MPU used by
subsystem WRFD- Sharing Interval
IP
theact
to current
as theadjacent
resourcenode
management 021305 Phase 2 Type 0~63 0~63
Transmissio
subsystem. The other seven n
subsystems are configured as Introduction
CPUS to act
The local as number
entity the control plane
uniquely WRFD- on Iu Interval
processing subsystems
identifies a local entity. for UMTS 050409 Interface Type 0~186 0~186
BSC
UUP:UMTS BSC User plane CRITICAL(Critic
INFO(Informatio
Process Security al), CRITICAL,
n Level),
ATM:AEUa/ATM ATM over MRFD- Managemen Enumerati MAJOR(Major), MAJOR,
WARN(Warn
Level of the
E1/T1/J1 log
interface,AOUa/ATM ATM 210305 t on Type MINOR(Minor) MINOR
Level),
over channelized Optical STM- ERR(Error
1/OC-3 interface,AOUc/ATM ATM Level),
over channelized Optical STM- Enumerati AST(Assert INFO, WARN,
1/OC-3
Log levelinterface,UOIa/ATM
to be collected. ATM None None on Type Level) ERR, AST
over Unchannelized Optical STM-
1/OC-3 interface,UOIc/ATM ATM
over Unchannelized Optical STM-
1/OC-3 interface Enumerati ON(ON),
alarm mask switch.
IP:GOUc/IP IP over GE Optical None None on Type OFF(OFF) ON, OFF
interface,GOUa/IP IP over GE
Optical interface,PEUa/IP IP over
E1/T1/J1 interface,FG2c/IP IP over WRFD- Ethernet Interval
FE/GE
Class ofinterface,FG2a/IP IP over
the maintenance domain 050425 OAM Type 0~7 0~7
FE/GE interface(not support
GbIP),POUc/IP IP over channelized
Optical STM-1/OC-3
Fractional link number Interval
interface,POUa/IP IP over
corresponding with the low end port None None Type 0~31 0~31
channelized Optical STM-1/OC-3
interface,UOIa/IP IP over Configuratio
Unchannelized Optical STM-1/OC-3 n OAM, UCP, OAM, UCP,
interface MRFD- Managemen Enumerati RUCP, UUP, RUCP, UUP,
SAU:Service Aware Uint 210301 t on Type ATM, IP, SAU ATM, IP, SAU
Configuratio
n
MRFD- Managemen Enumerati UCP, RUCP, UCP, RUCP,
Logical function type of the board 210301 t on Type UUP, ATM, IP UUP, ATM, IP
Enumerati
Logical function type None None on Type IP IP
Enumerati
Logical function type None None on Type IP IP
SAALLNK, SAALLNK,
Enumerati AAL2PATH, AAL2PATH,
Queried VCL link type None None on Type IPOAPVC IPOAPVC
SAALLNK, SAALLNK,
This parameter specifies the type of Enumerati IPOAPVC, IPOAPVC,
a VCL. None None on Type AAL2PATH AAL2PATH
Load Based
handover
enhanceme
nt on Iur-g
If the switch is ON, the load (3G to 2G)
difference between 3G cell and MBSC
target 2G cell will be considered Handover
during the load-base handover. If MRFD- based on
the switch is OFF, the load 211404 Load
difference between 3G cell and 2G WRFD- Enhanceme Enumerati OFF(OFF),
cell will not be considered. 071101 nt on Type ON(ON) OFF, ON
The
Localvalue of this parameter
IP address of PPP link.can
The IP
include
address of the PPPconditions.
one or two link on the BSC IP Address 0.0.0.0~255.2
"&"
side.is used to concatenate the None None Type None 55.255.255
conditions, and the records are
obtained when the two conditions
are matched.
Conditions are written in the format IP Address 0.0.0.0~255.2
Local
of "nameIP address
: value".of the MP group None None Type None 55.255.255
"name" is the key of location
information, "value" is the value of
location information. IP Address 0.0.0.0~255.2
Both
Local"name" and "value" are case
IP address None None Type None 55.255.255
sensitive.
Uniquely identifying a local cell. For
For example: 1. If you need to
detailed information of this 3GPP
obtain all the alarms regarding the
parameter, refer to 3GPP TS WRFD- Specificatio Interval
subrack 0, set lockeyinfo to
25.401. 010101 ns Type 0~268435455 0~268435455
"Subrack No : 0".
For example: 2. If you need to
obtain all the alarms regarding the Faulty
slot 8 in subrack 0, set lockeyinfo to MRFD- Managemen String 1~200
Identifies the first local IP address IP
"Subrack No : 0&Slot No : 8". 210304 t Type None characters
that communicates with the peer Transmissio
end. When it is set to 0, it is invalid. n
This IP address must be first Introduction
configured on the corresponding WRFD- on Iub IP Address 0.0.0.0~255.2
Identifies the second local IP IP
interface board. 050402 Interface Type None 55.255.255
address that communicates with the Transmissio
peer end. When it is set to 0, it is n
invalid. This IP address must be first Introduction
configured on the corresponding WRFD- on Iub IP Address 0.0.0.0~255.2
interface board. 050402 Interface Type None 55.255.255
Security
Whether to lock all the non-default MRFD- Managemen Enumerati OFF(Unlock),
IP
local accounts 210305 t on Type ON(Lock) OFF, ON
Transmissio
n
Introduction
WRFD- on Iub Interval
Local SCTP port number 050402 Interface Type 1024~65535 1024~65535
LFB(Load from
Configuratio OMU and write
n flash),
MRFD- Managemen Enumerati CL(Consult
board start load control. 210301 t on Type Load) LFB, CL
CPU usage threshold for log flow
control. When the average CPU
usage of sliding windows reaches or
exceeds the threshold, log flow WRFD- Flow Interval
control is triggered. 040100 Control Type 30~100 30~100
PFM_RESUL
T,
HOST_PFM_
RESULT,
ACTIVE_DEF
Packet queue usage threshold for _MEAS_FILE
log flow control. When the average ,
packet queue usage of sliding STANDBY_D
windows reaches or exceeds the EF_MEAS_FI
threshold, log flow control is WRFD- Flow Interval PFM_RESULT, LE,
IP
triggered. 040100 Control Type 30~100
HOST_PFM_RE 30~100
PFM_SWITC
Transmissio
n SULT, HS,
Whether the SCTP is bound to a Introduction ACTIVE_DEF_ HISTORY_AL
logical port. For details, see "ADD WRFD- on Iub Enumerati MEAS_FILE,
NO(NO), ARM,
IP STANDBY_DEF HISTORY_FA
IPLOGICPORT". 050402 Interface on Type YES(YES) NO, YES
Transmissio _MEAS_FILE, ULT,
Logical port No. bound by the n PFM_SWITCHS ALM_SYSTE
SCTP. For details, see the Introduction , M_CFG,
parameter "Logic port No." of the WRFD- on Iub Interval HISTORY_ALA SECURITY_L
IP
"ADD IPLOGICPORT". 050402 Interface Type 0~988
RM, 0~988
OG,
Transmissio
Logical port slot No. bound by the n HISTORY_FAU OPT_LOG,
SCTP. For details, see the Introduction LT, OMU_LOG,
parameter "Slot No." of the "ADD WRFD- on Iub Interval ALM_SYSTEM_ BSC_CFG_M
IPLOGICPORT". 050402 Interface Type CFG,
0~5,8~27 ML,
0~5, 8~27
CPU usage threshold for recovery SECURITY_LO CELL_BASIC
from log flow control. When the G, OPT_LOG, _INFO,
average CPU usage of sliding OMU_LOG, BSC_SERIES
windows is lower than the threshold, WRFD- Flow Interval BSC_CFG_MML _NO,
Packet queue usage threshold for
log flow control is triggered. 040100 Control Type 30~100
, 30~100
DB_BAK,
recovery from log flow control.
When the average packet queue CELL_BASIC_I MEM_DB_BA
usage of smooth windows is lower NFO, K,
than the threshold, log flow control WRFD- Flow Interval BSC_SERIES_ DEBUG_LOG
is triggered. 040100 Control Type NO, DB_BAK,
30~100 ,30~100
MEM_DB_BAK, LAST_WORD
DEBUG_LOG, ,
LAST_WORD, DSP_DEBUG
WRFD- Flow Enumerati
DSP_DEBUG_L _LOG,
Whether to control the log flow 040100 Control on Type ON, OFF ON, OFF
OG, HOST_LOG,
HOST_LOG, 3G_CHR_LO
3G_CHR_LOG, G,
Bit Field BSC_INFO, BSC_INFO,
The log type to be collected. None None Type BIOS_LOG BIOS_LOG
Configuratio NO_LOOP(No
n -loop), -180~180,
MRFD- Managemen Interval 180000000~180
REMOTE_LOO step:
Latitude of the GP receiver antenna 210301 t Type 000000
P(Remote loop), 0.000001
Configuratio LINE_REM_LO NO_LOOP,
-
n OP(Line remote REMOTE_LO
180:00:00.00
Latitude of the GPS receiver MRFD- Managemen String loop), OP,
0~180:00:00.
antenna 210301 t Type LOCAL_LOOP(L
None LINE_REMO
000
ocal loop), TE_LOOP,
PAYLOAD_LOO LOCAL_LOO
P(payload loop), P,
Enumerati OFF(OFF),
SIN_CHN_LOC( PAYLOAD_L
Loop Detect Switch None None on Type ON(ON) OFF, ON
single channel OOP,
local loop), SIN_CHN_LO
SIN_CHN_REM( C,
Enumerati single channel CIN_CHN_R
Loopback type None None on Type remote loop) EM
NO_LOOP(NO_
LOOP),
LOCAL_LOOP(L NO_LOOP,
OCAL_LOOP), REMOTE_LO
Number of suspension periods after REMOTE_LOO OP,
the bandwidth adjustment is Enumerati P(REMOTE_LO LOCAL_LOO
performed based on the packet drop None
Loopback type None on Type OP) P
ratio. This parameter specifies the
NO_LOOP(No
delay statistics periods in which the
loop), NO_LOOP,
bandwidth is not adjusted when the
This parameter specifies the Enumerati LOCAL_LOOP(L LOCAL_LOO
bandwidth adjustment function of
loopback type. None None on Type ocal loop) P
the logical port is triggered due to
the change of the packet drop ratio.
This parameter can be used to
control the rate of the bandwidth Interval
adjustment at the logical port. None None Type 1~100 1~100
Overbookin
g on IP
Number of the IP logical port that WRFD- Transmissio Interval
carries the IP path 050408 n Type 0~988 0~988
FG2a/GOUa/
Optical interface number of the low Interval UOIa(IP)
end port None None Type 0~7 board:0~119;
0~7
FG2c
board:0~489,
512~767;GO
Interval 0~499,
Uc
Logical port number None None Type 0~499,512~767 512~767
board:0~499,
512~767;PO
Uc(IP)
Interval 0~988,1024~15 board:0~988,
Logical port number None None Type 35 1024~1535
Enumerati Hub(Hub),
Type of logical port None None on Type Leaf(Leaf) Hub, Leaf
CPU usage threshold for location
RRC load sharing. When the CPU
usage reaches or exceeds the System
threshold, location RRC connection MRFD- Redundanc Interval
load sharing is triggered. 210101 y Type 30~100 30~100
Packet control threshold for location
RRC load sharing. When the packet
queue usage reaches or exceeds System
the threshold, location RRC MRFD- Redundanc Interval
connection load sharing is triggered. 210101 y Type 30~100 30~100
CPU usage threshold for recovery
from location RRC load sharing.
When the CPU usage is lower than System
the threshold, location RRC MRFD- Redundanc Interval
Packet queue usage threshold for
connection load sharing is stopped. 210101 y Type 30~100 30~100
recovery from location RRC load
sharing. When the packet queue
usage is lower than the threshold, System
location RRC connection load MRFD- Redundanc Interval
sharing is stopped. 210101 y Type 30~100 30~100
Interval
Slot number None None Type 0~5,8~27 0~5, 8~27
Interval APPLICATION(
EXCLUDE(Exclu
Subrack number None None Type 0~11
Application 0~11
de List
Program),
Command),
Security SCNDCPU_PR
INCLUDE(Includ
MRFD- Managemen Enumerati OG(Secondary
e List EXCLUDE,
Whether to include the list command 210305 t on Type Thread
Command) INCLUDE
Program),
Configuratio HORIZONTAL(H
BOOTROM(BO
n ORIZONTAL),
OTROM APPLICATIO
Query results can be displayed MRFD- Managemen Enumerati VERTICAL(VER HORIZONTA
Program), N,
vertically or horizontally 210301 t on Type TICAL) L, VERTICAL
DATA(Data file), SCNDCPU_P
DSP(DSP ROG,
Program), BOOTROM,
Enumerati FAN(Fan DATA, DSP,
Loading type None None on Type Program) FAN
OPTLOG(Opera
Security tion Log),
MRFD- Managemen Enumerati SECLOG(Securi OPTLOG,
Type of the log 210305 t on Type ty Log) SECLOG
OPTLOG(Opera
Security tion Log),
MRFD- Managemen Enumerati SECLOG(Securi OPTLOG,
Type of the log 210305 t on Type ty Log) SECLOG
Interval
VCI value of the low end port VCL None None Type 32~65535 32~65535
IP Address 0.0.0.0~255.2
Subnet mask of the board None None Type None 55.255.255
FP MUX for
The offset between the FACH Open Loop
IP
transmit power and PCPICH WRFD- Power Interval -35~15, step:
Transmissio
transmit power in a cell. 020501 Control Type -350~150 0.1
n
WRFD- UDP MUX
050420 for Iu-CS
WRFD- Transmissio Interval
Maximum multiplexing frame length. 050412 n Type 24~1031 24~1031
Maximum number of users
supported by the HSDPA channel.
The user in this parameter refers to
the user with services on the
HSDPA channel, regardless of the
Maximum number of users
number of RABs carried on the
supported
Maximum numberby the HSUPA channel.
of satellites
HSDPA channel. Maximum HSDPA
The
whose user in this parameter
ephemeris refers to
can be delivered WRFD- A-GPS Interval
user number cannot exceed the
the
when user
thewith services
A-GPS methodon the
is used. 020803 Based LCS Type 4~16 4~16
HSDPA capability of the NodeB
HSUPA channel, regardless of the
product, In practice, the value can
number of RABs carried on the
be set based on the cell type and
HSUPA channel. Maximum HSUPA
the richness of the available HSDPA WRFD- Admission Interval
user number cannot exceed the
power and code resources. 020101 Control Type 0~100 0~100
HSUPA capability of the NodeB
product, In practice, the value can
The
be setvalue of this
based parameter
on the cell typecannot
and
be
theless than of
richness thethe
maximum
availablePPPMUX
HSUPA WRFD- Admission Interval
sub-frame
power and length (MUXMAXSFL).
code resources. 020101 Control Type 0~100 0~100
Max allowed number of continuous
This parameter can be associated
invalid measurement reports. For
with the maximum segment length
detailed information of this Load
of the MP to control whether to
parameter, refer to 3GPP TS WRFD- Measureme Interval
segment the multiplexed MP. To
25.433. 020102 nt Type 2~255 2~255
enable the PPPMUX, the number of
sub-frames must be more than or
equal to 2. The following condition
must be met: wMuxMaxSfL <= Interval
( wMuxMfl-8 )/2. None None Type 1~1500 1~1500
Security
This parameter specifies the
Maximum number of retries when MRFD- Managemen Interval
maximum number of channelization 3.4/6.8/13.6
the user logs in 210305 t Type 1~255 1~255
codes supported by uplink DPDCH. /27.2 kbit/s
The larger the value of this RRC
parameter, the more the available Connection
channelization codes of uplink WRFD- and RAB Interval
DPDCH. 010510 Assignment Type 1~6 1~6
ATM
Transmissio
Maximum number of allowed n
retransmissions during the WRFD- Introduction Interval
verification. 050301 Package Type 0~10 0~10
Faulty
Maximum TX powerfor
capacity ofstoring
the PCPICH
the MRFD- Managemen Interval 10000~15000
If the number of the path IP
in a cell.
alarm logThis parameter should be 210304 t Type 10000~150000 0
retransmissions exceeds this value, Transmissio
set based on the actual system
the parameter is deleted n
environment such as cell coverage
automatically. The value must be Introduction
(radius) and geographical
smaller than Association max WRFD- on Iub Interval
environment, and the cell total
retrans. 050402 Interface Type 0~254 0~254
power. When the ratio of soft
handover areas keeps the same,
the downlink coverage cannot be Open Loop
promoted by the increase of WRFD- Power Interval -10~50, step:
PCPICH power. 020501 Control Type -100~500 0.1
Maximum data count in the poll
period. It indicates the count of data
packets (SD) allowed to be
transmitted between the intervals of
two Poll messages. The value ATM
ranges from 250 to 500 when Transmissio
Maximum queue time of users.
Maximum PPPMUX
interface type sub-frame
is set to NNI. The n
When a user initiates a call, it joins
length. If the PPP
value ranges from frame length
25 to 50 is
when WRFD- Introduction Interval 25~50(UNI),
the queue due to cell resource
larger than
interface thisisvalue,
type set to the
UNI.PPPMUX 050301 Package Type 25~50,250~500 250~500(NNI)
insufficiency. This parameter
multiplexing is performed. The value
defines the maximum length of time
of this parameter cannot be larger
required for queuing of a user. If cell Queuing
than the maximum multiplexed
resources are still insufficient after WRFD- and Pre- Interval
frame length wMuxMfl. To enable
expiration, access fails. 010505 Emption Type 1~60 1~60, step:1
the PPPMUX, the number of sub-
frames must be more than or equal
to 2. The following condition must
be met: wMuxMaxSfL <= ( wMuxMfl- Interval
8 )/2 None None Type 1~746 1~746
MBMS
A timer used to alarm for no mbms WRFD- Introduction Interval
data for MBMS traffic. 010616 Package Type 1~10 1~10
ON denotes enabling of the MBMS
Iub transmission resource sharing FACH
function; OFF denotes disabling of Transmissio
the MBMS Iub transmission WRFD- n Sharing Enumerati OFF(OFF),
resource sharing function. 010627 for MBMS on Type ON(ON) OFF, ON
MBMS
WRFD- Introduction String
mobile country code of the RNC. 010616 Package Type None 000~999
MBMS service release is an
extreme method in reducing the cell
load and recovering the system MBMS
MBMS
when the cell is overloaded and WRFD- Introduction String
FLC(Freque
congested.
mobile network code of the RNC. 010616 Package Type None 000~999
ncy Layer
The mechanism of the OLC is that
Convergenc
an action is performed in each [OLC
e)/FLD(Freq
period] and some services are
It is an indicator of MBMS WRFD- uency Layer Enumerati FALSE,
selected based on the action rules
neighboring cell. 010626 Dispersion) on Type FALSE, TRUE TRUE
to perform this action. This
parameter defines the maximum
number of MBMS services released
in executing downlink OLC service WRFD- Overload Interval
release. 020107 Control Type 0~8 0~8
This
This parameter
parameter specifies
specifies the
the uplink Queuing
bit rate
transport of the MBMS service in PTP
Indicatingmodewhether of MBMS
MBMSservices.
is WRFD- and Pre- Enumerati
mode.
The The CN does not assign
point-to-multipoint (PTM), point- the
supported. 010505 Emption on Type OFF, ON OFF, ON
uplink rate
to-point to the
(PTP), MBMS
and service,
enhanced PTM but
the MBMS service in
(ENHANCEDPTM) PTP mode
modes is
are static MBMS
in
or acknowledged mode modes.
semi-static transport and requires Enhanced D8, D16, D32,
the uplink rate for RLC status
They are relatively simple and have WRFD- Broadcast Enumerati D64, D128, 8, 16, 32, 64,
reporting.
little impact on the MBMS service 01066001 Mode on Type D144, D256 128, 144, 256
and the network performance. The
dynamic
MBMS SA mode (DYNAMIC)
ID. For detailed is MBMS
complicated. In dynamic
information of this parameter, mode,refer WRFD- Introduction Interval
transition
to the 3GPP between
25.346. PTP and PTM 010616 Package Type 0~65535 0~65535
modes is performed dynamically to
balance the quality of service and
the network resource utilization. The MBMS
network periodically changes the WRFD- Introduction Interval
MBMS
transport Service
mode Identity.
based on the 010616 Package Type 0~16777215 0~16777215
number of users and the status of
neighboring
ON denotes cells.enablingThese activities
of the MBMS MBMS
have
function;an impact on the reception
OFF denotes disabling ofof WRFD- Introduction Enumerati OFF(OFF),
the MBMS service,
function.and the MBMS 010616 Package on Type ON(ON) OFF, ON
user might experience service
disruption when the user moves
The total MBMS traffic of all License
across the border between PTP cell
operators cannot exceed the MBMS MRFD- Managemen Interval
and PTM cell. Therefore, the
value in the license. 210403 t Type 0~8040000 0~8040000
dynamic mode has a relatively great
impact on the MBMS service and Load Based PTM, PTP,
the network performance. For handover PTM, PTP, ENHANCEDP
details of this parameter, refer to the WRFD- enhanceme
MBMS Enumerati ENHANCEDPT TM,
3GPP TS 25.346. 010660 nt on Iur-g
Phase 2 on Type M, DYNAMIC DYNAMIC
(3G to 2G)
MBSC Load
Balancing
Interval
MRFD- MBSC
Maximum burst size (MBS) None None Type 3~10000 3~10000
This parameter defines the 211402 Handover
adjustment coefficient of load value MRFD- based on
of 2G cell, which used when load 211404 Load
value of 2G cell is compared to the WRFD- Enhanceme Interval
load value of 3G cell. 071101 nt Type 0~10 0~10
This parameter defines the load
difference threshold between 3G Load Based
cell and 2G cell when CS service is handover
distributed to 2G. If the load enhanceme
difference between 3G cell and nt on Iur-g
This parameter defines the load
target 2G cell exceeds this MRFD- (3G to 2G)
difference threshold between 3G Load Based
parameter value, then the load- 211403 MBSC
cell and 2G cell when PS service is handover
based balance of CS service may WRFD- Load Based
Service Interval
distributed to 2G. If the load enhanceme
be performed. 071101 handover
Distribution Type -100~100 -100~100
difference between 3G cell and nt on Iur-g
enhanceme
target 2G cell exceeds this MRFD- (3G to 2G)
nt on Iur-g
parameter value, then the load- 211403 MBSC
(3G to 2G)
based balance of PS service may WRFD- Service Interval
If the switch is ON, the load state of MBSC
be performed. 071101 Distribution Type -100~100 -100~100
target 2G cell will be considered Handover
during Non-covered InterRat MRFD- based on
Load Based
handover procedure. If the switch is 211404 Load
If the switch is ON, the NACC handover
OFF, the load state of target 2G cell WRFD- Enhanceme Enumerati OFF(OFF),
procedure does not require the enhanceme
will not be considered. 071101 nt on Type ON(ON) OFF, ON
support of the CN. Instead, the nt on Iur-g
This parameter defines the switch of
GERAN (P) SI is sent through the WRFD- (3G to 2G)
service distribution and load Load Based
internal information exchange 071101 NACC
balancing algorithm. If SERVICE- handover OFF(OFF),
mechanism between the RNC and MRFD- Procedure Enumerati
BASED is selected, only load state MRFD- enhanceme SERVICE-
BSC. 211401 Optimization on Type OFF, ON OFF, ON
of 2G target cell will be considered. 211402 nt on Iur-g BASED(SERVIC OFF,
If LOAD-BASED is selected, the MRFD- (3G to 2G) E-BASED), SERVICE-
difference between the load in the 211403 MBSC LOAD- BASED,
source cell and load in the target 2G WRFD- Service Enumerati BASED(LOAD- LOAD-
cell will be considered in addition. 071101 Distribution on Type BASED) BASED
MOCN
WRFD- Introduction String
Mobile country code of the RNC. 021311 Package Type None 000~999
Inter-RAT
Handover
Mobile Country Code (MCC) of the WRFD- Based on String
GSM cell. 020303 Coverage Type None 3 digits
3GPP
The code of the country to which the WRFD- Specificatio String
RNC belongs. 010101 ns Type None 000~999
LONG(LONG),
Enumerati SHORT(SHORT LONG,
MP/MC sequence header option None None on Type ) SHORT
MBMS
WRFD- Introduction Interval
Physical channel ID of the MICH. 010616 Package Type 0~255 0~255
TX power of the MICH. The greater
the power of the MICH, For details MBMS
about this parameter, refer to the WRFD- Introduction Interval
3GPP 25.433. 010616 Package Type -10~5 -10~5
The value indicates whether the
MICH uses time and space TX
diversity. For detailed information of MBMS FALSE(Not
this parameter, refer to the 3GPP WRFD- Introduction Enumerati Use), FALSE,
TS 25.433. 010616 Package on Type TRUE(Use) TRUE
IP Re-route
Minimum interval at which two BFD WRFD- Based on Interval
packets are received. 050421 BFD/ARP Type 10~1000 10~1000
IP Re-route
Minimum interval between sent BFD WRFD- Based on Interval
This parameter specifies the 3.4/6.8/13.6
packets 050421 BFD/ARP Type 10~1000 10~1000
minimum spreading factor /27.2 kbit/s
supported by uplink DPDCH. The RRC
larger the value of this parameter, Connection SF4, SF8,
the fewer the available spreading WRFD- and RAB Enumerati SF4, SF8, SF16, SF16, SF32,
factors of uplink DPDCH. 010510 Assignment on Type SF32, SF64 SF64
Interval
Mirror Ethernet port number None None Type 0~11 0~11
UP(upstream
mirror),
Enumerati DOWN(downstr
Mirror type None None on Type eam mirror) UP, DOWN
Maximum number of random access System
preamble loops. For detailed Information
information of this parameter, refer WRFD- Broadcastin Interval
to 3GPP TS 25.331. 010401 g Type 1~32 1~32
MOCN
WRFD- Introduction String 00~99,
Mobile network code of the RNC. 021311 Package Type None 000~999
Inter-RAT
Handover
Mobile Network Code (MNC) of the WRFD- Based on String
GSM cell. 020303 Coverage Type None 2~3 digits
ULTI_PLMN_LI WED_SWITC
MOCN Control Switch. ST_ALLOWED_ H,
1) SWITCH, SPARE_1_S
COMM_MOCN_NRI_GLOBAL_CO SPARE_1_SWI WITCH,
NFIG_MODE_SWITCH: When the TCH, SPARE_2_S
switch is selected, the NRI of any SPARE_2_SWI WITCH,
CN node in the RNC is unique in the TCH, SPARE_3_S
CS or PS domain. SPARE_3_SWI WITCH,
The code of the mobile 3GPP
2) TCH, SPARE_4_S
communication network to which the WRFD- Specificatio String 00~99,
COMM_MIB_MULTI_PLMN_LIST_ SPARE_4_SWI WITCH,
RNC
Workingbelongs.
mode of the system clock. 010101 ns Type None 000~999
ALLOWED_SWITCH: When the TCH,
Working
switch is modes of the system
selected, operatorclock SPARE_5_SWI SPARE_5_S
are as follows:
information configured in the MOCN MOCN TCH, WITCH,
(1)
cellMANUAL:
is sent as In thisPLMN
Multi mode,List
youin the WRFD- Introduction Bit Field SPARE_6_SWI SPARE_6_S
must
system specify a clock source and
information. 021311 Package Type TCH WITCH
prevent the switching of the clock
This parameter determines whether
source.
the RNC supports the MOCN MOCN
(2) AUTO: In this mode, you do not
function. When MOCN Supported, WRFD- Introduction Enumerati
need to specify a clock source and
RNC can configure multi-plmn. 021311 Package on Type NO, YES NO, YES
the system automatically selects the MANUAL(Manu
clock source with the highest al Handover),
priority. AUTO(Auto
(3) FREE: In this mode, the crystal MRFD- BSC/RNC Enumerati Handover), MANUAL,
SCTP link work mode. Server mode: IP
oscillator of GCU board is used. 210502 Clock on Type FREE(Free-run) AUTO, FREE
BSC6900 starts the listening and Transmissio
waits for the peer to send the SCTP- n SERVER(SERV
INIT message. Client mode: Introduction ER MOD),
BSC6900 actively sends the SCTP- WRFD- on Iub Enumerati CLIENT(CLIENT SERVER,
INIT message. 050402 Interface on Type MOD) CLIENT
Configuratio
n
MRFD- Managemen Enumerati MODE1(1:1
OFF(OFF),
configuration mode 210301 t on Type Protection
ON(ON) OFF, ON
Switching),
Working mode of a port. When this Configuratio GO(GSM),
MODE2(1+1
parameter is set to n UO(UMTS),
Unidirectional
CHECK_ON_STANDBY_PORT, the MRFD- Managemen Enumerati GU(GSM and
Protection
connectivity
Working mode check
afterisswitchover
performed on 210301 t on Type UMTS) GO, UO, GU
Switching),
the standby port. When this CHECK_ON_
MODE3(1+1
parameter is set to INDEPENDE
Bidirectional MODE1,
CHECK_ON_INDEPENDENT_POR CHECK_ON_IN NT_PORT,
Backup mode of the switch Enumerati Protection MODE2,
T, the connectivity check is DEPENDENT_P CHECK_ON_
protection group None None on Type Switching) MODE3
performed on the independent port. ORT, PRIMARY_P
When this parameter is set to CHECK_ON_PR ORT,
CHECK_ON_PRIMARY_PORT, the IP Re-route IMARY_PORT, CHECK_ON_
connectivity check is performed on WRFD- Based on Enumerati CHECK_ON_ST STANDBY_P
Dynamic
the active port. 050421 BFD/ARP on Type ANDBY_PORT ORT
AAL2
This timer is started when an AAL2 Connections
signaling entity sends the service in
user an indication for modifying the WRFD- Iub/IuCS/Iur Interval
Dynamic
bandwidth of an AAL2 path. 05030104 Interface Type 5000~30000 5000~30000
AAL2
This timer is started when an AAL2 Connections
signaling entity sends the peer node in
a request for modifying the WRFD- Iub/IuCS/Iur Interval
bandwidth of an AAL2 path. 05030104 Interface Type 5000~30000 5000~30000
Enumerati MLPPP,
MP type None None on Type MLPPP, MCPPP MCPPP
Configuratio
n
Number of the slot where the MPU MRFD- Managemen Interval
subsystem is located 210301 t Type 0~27 0~27
This switch specifies whether to add
Configuratio
the MSCH logical channel on the
n
SCCPCH. When multi-MTCH logical
Number of the subrack where the MRFD- Managemen Interval
channels are carried on one
MPU subsystem is located 210301 t Type 0~11 0~11
SCCPCH, an MSCH logical channel
This parameter specifies whether to
should be added on the SCCPCH,
add the MSCH logical channel on
which is used to send scheduling
the SCCPCH. When one MTCH
control information of the data of WRFD- MBMS Enumerati OFF(OFF),
logical channel is carried on one
MTCH. 010660 Phase 2 on Type ON(ON) OFF, ON
SCCPCH, an MSCH logical channel
should be added on the SCCPCH,
which is used to send scheduling
control information of the data of WRFD- MBMS Enumerati OFF(OFF),
CLEAR(Cleared)
MTCH. 010660 Phase 2 on Type ON(ON)
, LOP(Lockout of OFF, ON
Protection),
When ON,the message is Simplified FS(Forcibly
valid.When OFF,the message is WRFD- Cell switchover 1~100
invalid. 011001 Broadcast Any Type working
None link to characters
protection link),
OFF(Message is
MS(Manual
When ON,the message is Simplified invalid),
switchover from
valid.When OFF,the message is WRFD- Cell Enumerati ON(Message is
working link to
invalid. 011001 Broadcast on Type valid) OFF, ON
protection link),
EXERS(Exercis
ely switch CLEAR, LOP,
Control command of the MSP Enumerati working link to FS, MS,
switchover protection group None None on Type protection link) EXERS,
Available guarantee codes of all the
MTCHs. This parameter is a
This parameter
protection for the specifies
MBMS PTM the
minimum
bearing. When coverage percentage
the codes of
of all the
the
MTCHs MTCH arecorresponding
few, pre-emption to the
of
Maximum code limit of all the
RAB
MBMS priority
PTM of 0. When
bearing the cell
should be load
MTCHs. This parameter is a limit to
is high, the
avoided. ThisRNCis configures
because the low
MBMS
Thismaximum
the
Switch parameter
for the
the MBMSspecifies
bearing the
of the
self-healing of MBMS
theas
power
PTM for
bearing serves service
multiple so
users
minimum
PTM
OMU when coverage
bearing. theWhen
OMU percentage
the code ofofall
process Enumerati ON(ON),
to
at avoid
the sameworsening
time. The congestion
value in
should
the
memoryMTCH
MTCHs is corresponding
are few, pre-emption
overloaded to the of None None on Type OFF(OFF) ON, OFF
the
not cell
be andhigh.
too improve the setup
Otherwise, all the
RAB
MBMS priority
PTM of 15. When
bearing shouldthebe cell
success
system rate of themay
resources MBMS be service.
load
avoided.is high,
Thisthe RNC configures
is because the MBMS low
This
consumedlow power,by thehowever,
MBMS should
PTM
power
PTM bearingfor the serves
MBMS multiple
service so
usersas
cover
bearing theandminimum coverage
capacity area
too littlecongestion isinleft WRFD- Admission Interval 0~1,
to the
at avoid sameworsening
time. The value should
of
forthe
the MBMS
non-MBMS service. The minimum
services. 020101 Control Type 0~100 step:0.01
the cell and improve the
not be too high. Otherwise, all the setup
coverage area is set to a certain
success rate of themay
system resources MBMS be service.
percentage of the coverage area
This
consumedlow power,by thehowever,
MBMS PTM should
associated with the maximum
cover
bearing theandminimum
too littlecoverage
capacity areais left WRFD- Admission Interval
transmit power of the FACH. To
of
forthe
theMBMSnon-MBMS service. The minimum
services. 020101 Control Type 0~63 0~63
fulfill service differentiation, services
coverage area is set to a certain
of different priorities have different
percentage of the coverage area
minimum coverage areas. For
associated with the maximum
details of this parameter, refer to the WRFD- MBMS Load Interval 0~1, step:
transmit power of the FACH. To
3GPP TS 25.346. 01061603 Control Type 0~100 0.01
fulfill service differentiation, services
This parameter specifies the MTCH
of different priorities have different
multiplexing threshold. When the
minimum coverage areas. For
rate of an MBMS service is lower
details of this parameter, refer to the WRFD- MBMS Load Interval 0~1, step:
than this threshold, the service,
3GPP
Available TS guarantee
25.346. power of all the 01061603 Control Type 0~100 0.01
together with other services, is
MTCHs.
allocatedThis parameterS-CCPCH,
a multiplexed is a
protection for the MBMS
whose transmission rate isPTMset to the
bearing. When the
MTCH multiplexing threshold power of all the WRFD- MBMS Enumerati D16, D32, D64, 16, 32, 64,
MTCHs
fixedly. are little, pre-emption of 010660 Phase 2 on Type D128, D256 128, 256
This parameter specifies whether to
MBMS PTM bearing should be
apply Robust Header Compression
avoided. This is because the MBMS
(ROHC) on the MTCH. The value
PTM bearing serves multiple users
TRUE indicates to apply ROHC on WRFD- MBMS Enumerati TRUE,
at the same time. The value should
the MTCH. 010660 Phase 2 on Type True, False FALSE
not be too high. Otherwise, all the
system resources may be
consumed by the MBMS PTM
bearing and too little capacity is left WRFD- Admission Interval 0~1,
for the non-MBMS services. 020101 Control Type 0~100 step:0.01
Available guarantee codes of all the
MTCHs. This parameter is a
protection for the MBMS PTM WRFD- Admission Interval
bearing. 020101 Control Type 0~63 0~63
Configuratio
n
Metric system. The values of this MRFD- Managemen Enumerati MET(Metric),
parameter include "MET" and "IMP". 210301 t on Type IMP(Imperial) MET, IMP
Cell ID + MET(Metric
Support localization maintenance, RTT System),
Metric System and British WRFD- Function Enumerati IMP(British
IP
Measurement can be selected. 020801 Based LCS on Type Measurement) 0, 1
Transmissio
n
Introduction
WRFD- on Iub Interval
Maximum transport unit 050402 Interface Type 500~1500 500~1500
Interval
Maximum transmission unit None None Type 776~1696 776~1696
Interval
Maximum transmission unit None None Type 256~1650 256~1650
FP MUX for
IP
Frame timeout duration of the PPP Interval
Transmissio
multiplexing group None None Type 1~1500 1~1500
n
WRFD- UDP MUX
050420 for Iu-CS
WRFD- Transmissio Enumerati FPMUX, FPMUX,
IP packet multiplexing type 050412 n on Type UDPMUX UDPMUX
1~16(FG2a/G
IP Re-route OUa),
WRFD- Based on Interval 1~512(FG2c/
BFD local description mark 050421 BFD/ARP Type 1~512 GOUc)
ATM
Transmissio
Number of transmitted verification n
packets in the initial verification. See WRFD- Introduction Interval
the ITU-T Q2110. 050301 Package Type 10~2000 10~2000
Maximum number of
retransmissions of the RRC 3GPP
CONNECTION REQUEST WRFD- Specificatio Interval
message. 010101 ns Type 0~7 0~7
Maximum number of
retransmissions of CELL 3GPP
UPDATE/URA UPDATE.Protocol WRFD- Specificatio Interval
default value is 3. 010101 ns Type 0~7 0~7
Maximum number of
retransmissions of UE CAPABILITY 3GPP
INFORMATION. Protocol default WRFD- Specificatio Interval
value is 2. 010101 ns Type 0~7 0~7
String 1~31
IP
Name of the adjacent node None None Type None characters
Transmissio
n
Introduction
Local entity name. The local entity WRFD- on Iu String 1~49
IP
name must be unique. 050409 Interface Type None characters
Transmissio
n
Introduction
WRFD- on Iu String 1~49
IP
Name of the destination entity 050409 Interface Type None characters
Transmissio
n
The M3UA route names and the Introduction
M3UA routes are in the one-to-one WRFD- on Iu String 1~31
matching relation. 050409 Interface Type None characters
IP
Transmissio
n
Name of the M3UA link set. The Introduction
name of the M3UA signalling link set WRFD- on Iu String 1~49
IP
must be unique. 050409 Interface Type None characters
Transmissio
M3UA signaling link name. The n
M3UA link names and the M3UA Introduction
links are in the one-to-one matching WRFD- on Iu String 1~31
relation. 050409 Interface Type None characters
Upper limit of random access back- System
off delay. For details, refer to the Information
3GPP TS 25.331 and 3GPP TS WRFD- Broadcastin Interval
25.214 protocols. 010401 g Type 0~50 0~50
Lower limit of random access back- System
off delay. For details, refer to the Information
3GPP TS 25.331 and 3GPP TS WRFD- Broadcastin Interval
25.214 protocols. 010401 g Type 0~50 0~50
IP Address 0.0.0.0~255.2
IP address of the next hop. None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Next hop None None Type None 55.255.255
Threshold for deciding that the UE is
This parameter state.
in high-mobility defines the of
successive
This parameter in-sync indications
specifies a threshold
required for thedecision.
for high-speed NodeB toAftertrigger
thethe
radio link recovery
UE reports event 1D,process.The
the UE is
radio link setinremains
considered in thestate
high-mobility initialif
state until it has receivedofathe certain IP Address 0.0.0.0~255.2
the number of changes best
Next
numberhop(the number is defined by None None Type None 55.255.255
cell during [TFASTSPDEST] is
NInsyncInd) of successive in-sync
larger than [NFASTSPDEST]. The HCS
indications
smaller the from
valueL1,
is, and then the
the more (Hierarchica
NodeB
possiblytriggers
the UEthe radio link
is decided in high- WRFD- l Cell Interval
recovery process, which indicates
mobility state. 021200 Structure) Type 1~16 1~16
ATM
that the radio link set has been
Transmissio INT(INT),
synchronized. Once the radio link
n INTB(INTB),
recovery process is triggered, the
WRFD- Introduction Enumerati NAT(NAT), INT, INTB,
radio link set is considered to be in
Network ID 050301 Package on Type NATB(NATB) NAT, NATB
the synchronized state. In the radio
This parameter should be set
link maintenance process, Physical
according to the actual
NInsyncInd is used together with the Channel
network situation . If there is the Gs
This parameter
successive specifiesindication
out-of-sync the value WRFD- Managemen Interval
interface between SGSN and
of the NAS Node Selection Function
counter. 022000 t Type 1~256 1~256
MSC/VLR, this parameter is set to
(NNSF) timer for CS traffic paging.
"MODE1"; otherwise, the parameter
For the IMSI paging of the UE in CS
is set to "MODE2". It is valid only 3GPP
connection mode, on receiving the
when [CN domain ID] is set as WRFD- Specificatio Enumerati MODE1, MODE1,
IMSI paging with the first Global CN
PS_DOMAIN. 010101 ns on Type MODE2 MODE2
ID, the RNC stores the Global CN
ID and starts the NNSF protection
timer. Once the UE responds to the
IMSI paging, the RNC stops the WRFD- Interval
NNSF protection timer. 021302 Iu Flex Type 0~60 0~60
Faulty
MRFD- Managemen Interval
Lower limit of input voltage 1 210304 t Type 40~45 40~45
Faulty
MRFD- Managemen Interval
Upper limit of input voltage 1 210304 t Type 55~59 55~59
Faulty
MRFD- Managemen Interval
Lower limit of input voltage 2 210304 t Type 40~45 40~45
Faulty
MRFD- Managemen Interval
Upper limit of input voltage 2 210304 t Type 55~59 55~59
Faulty
MRFD- Managemen Interval
Lower limit of input voltage 3 210304 t Type 40~45 40~45
Faulty
MRFD- Managemen Interval
Upper limit of input voltage 3 210304 t Type 55~59 55~59
Faulty
MRFD- Managemen Interval
Lower limit of input voltage 4 210304 t Type 40~45 40~45
Faulty
MRFD- Managemen Interval
Upper limit of input voltage 4 210304 t Type 55~59 55~59
Faulty
MRFD- Managemen Interval
Lower limit of input voltage 5 210304 t Type 40~45 40~45
Faulty
MRFD- Managemen Interval
Upper limit of input voltage 5 210304 t Type 55~59 55~59
Faulty
MRFD- Managemen Interval
Lower limit of input voltage 6 210304 t Type 40~45 40~45
Faulty
MRFD- Managemen Interval
Upper limit of input voltage 6 210304 t Type 55~59 55~59
Interval
Maximum number of HSDPA users
Cabinet number of NodeB None None Type 0 0
of the NodeB. If the HSDPA user
access is rejected by the NodeB,
you can infer that the HSDPA HSDPA
licenses are insufficient. New WRFD- Admission Interval
Maximum number of HSUPA users
HSDPA licenses are required. 01061003 Control Type 0~3840 0~3840
of the NodeB. If the HSUPA user
access is rejected by the NodeB,
you can infer that the HSUPA HSUPA
licenses are insufficient. New WRFD- Admission Interval
Dynamic
HSUPA licenses are required. 01061202 Control Type 0~3840 0~3840
AAL2
Connections
ID of the adjacent node to be in
added. The parameter is valid when WRFD- Iub/IuCS/Iur Interval
Adjacent node type is set to IUB. 05030104 Interface Type 0~65535 0~65535
WRFD- Interval
NodeB ID 031101 DHCP Type 0~65535 0~65535
Interval
NodeB ID None None Type 0~65535 0~65535
level credit congestion control
algorithm): When the cell group
level credit load is heavy, users are
assembled in priority order among
all the NodeBs and some users are
selected for LDR action in order to
reduce the cell group level credit
load.
3GPP
IUB_OLC (Iub Overload WRFD- Specificatio Interval
congestion
NodeB ID. control algorithm): When 010101 ns Type 0~65535 0~65535
the NodeB Iub load is Overload,
users are assembled in priority
order among all the NodeBs and
Interval
some users are selected for Olc IUB_LDR,
IMA group number of NodeB None None Type 0~3 0~3
action in order to reduce the NodeB IUB_LDR, NODEB_CRE
Iub load. NODEB_CREDI DIT_LDR,
To enable some of the algorithms T_LDR, LCG_CREDIT
above, select them. Otherwise, they WRFD- Load Bit Field LCG_CREDIT_L _LDR,
are disabled. 020106 Reshuffling Type DR, IUB_OLC IUB_OLC
String 1~64
Name of the NodeB. None None Type None characters
String 1~64
NodeB name None None Type None characters
3GPP
WRFD- Specificatio Enumerati R99, R4, R5, R99, R4, R5,
Protocol version of the NodeB. 010101 ns on Type R6, R7 R6, R7
BASE_BOAR
Type of the BSC6900 board Enumerati BASE_BOARD, D, CH_STM1,
interworking NodeB None None on Type CH_STM1, E1 E1
NORMAL(Norm
al),
IUB(Iub
ATM PICO_TYPE1(Pi
Interface), NORMAL,
Switching co type 1),
IUR(Iur PICO_TYPE1
WRFD- Based Hub Enumerati PICO_TYPE2(Pi
Interface), ,
Indicating the type of the NodeB. 050105 Node B on Type co type 2)
IUCS(Iu-CS PICO_TYPE2
Interface),
3GPP IUPS(Iu-PS
WRFD- Specificatio Interval Interface), 5~1440,
Period of node synchronization. 010101 ns Type UNI_AAL2SWIT
1~288 step:5
CH(the adjacent
node of the ATM
3GPP
switch on the Iub
Measurement start time WRFD- Specificatio Compound 00:00:00~23:
Dynamic interface), IUB, IUR,
(HH:MM:SS). 010101 ns Type hour, min, sec 59:59
AAL2 NNI_AAL2SWIT IUCS, IUPS,
Connections CH(the adjacent UNI_AAL2S
in node of ATM WITCH,
WRFD- Iub/IuCS/Iur Enumerati switch on Iur or NNI_AAL2S
3.4/6.8/13.6
Type of the adjacent node 05030104 Interface on Type Iu-CS interface) WITCH
/27.2 kbit/s
RRC
This parameter defines the of Connection PICO_TYPE1
This parameter
successive specifies
in-sync the small-
indications WRFD- and RAB Enumerati PICO_TYPE1, ,
scaled base station type.
required for starting the radio link 010510 Assignment on Type PICO_TYPE2 PICO_TYPE2
failure timer. When the radio link set CONFIGURE
This parameter specifies the ratio of
is in the synchronized
Indicating whether the state,non-HCSthe CONFIGURED, D,
the non-serving E-DCH RX power to
NodeB starts the timer after
speed estimation parameter should it WRFD- Intra RNC Enumerati NOT_CONFIGU NOT_CONFI
the total E-DCH RX power. The
receives successive out-of-sync
be configured. 010801 Cell Update on Type RED GURED
parameter indicates whether a non-
indications of the number defined by
serving NodeB sends the relative
NOutsyncInd.The NodeB shall stop
Priority
grant (RG)of neighboring
message tocells. the UE. For HSUPA
and reset the timer after receiving
The priority
details aboutthatthiscorresponds
parameter, referto theto WRFD- Power Interval 0~1,
successive in-sync indications of the
neighboring
3GPP TS 25.433. cell is valid only when 01061203 Control Type 0~100 step:0.01
number defined by
the this parameter is set to TRUE.
NInsyncInd.When the timer expires, Physical
The lower the priority, the easier it is
Priority
the NodeB of neighboring
triggers thecells.
radio link Channel
for the neighboring cell to be
The priority
failure process,that and
corresponds
indicates to the
which WRFD- Managemen Interval
delivered as the measurement Intra RNC
neighboring
radio link setcell is valid only when
is out-of-sync. 022000 t Type 1~256 1~256
object. For example, it is more Softer
the this parameter is set to TRUE.
possible for a neighboring cell of WRFD- Handover
The lower the priority, the easier it is
Priority
priority 1ofthan
neighboring
a cell of cells.
priority 2 to 020202 Inter RNC
for the neighboring cell to be
The priority that
be delivered corresponds
as the measurement to the WRFD- Soft Interval
delivered as the measurement Inter
neighboring
object. cell is valid only when 020203 Handover Type 0~30 0~30
object. For example, it is more Frequency
the this parameter is set to TRUE.
possible for a neighboring cell of Hard
The lower the priority, the easier it is
Priority
priority 1identifier
than a cellof neighboring
of priority 2 to Handover
for the neighboring cell to be
cells.
be delivered as the measurement WRFD- Based on Interval
delivered as the measurement
TRUE
object. indicates that the neighboring 020302 Coverage Type 0~63 0~63
object. For example, it is more
cell priority is valid in the algorithm
possible for a neighboring cell of Inter-RAT
of neighboring cell combination.
priority 1 than a cell of priority 2 to Handover
FALSE indicates that the
be delivered as the measurement WRFD- Based on Interval
neighboring cell priority is invalid, Intra RNC
object. 020303 Coverage Type 0~31 0~31
and, in the algorithm of neighboring Softer
cell combination, the cell with invalid WRFD- Handover
priority is the last one to be 020202 Inter RNC
considered as the measurement WRFD- Soft Enumerati FALSE,
object. 020203 Handover on Type FALSE, TRUE TRUE
to minimize ping-pong effect, the
transition between PTP and PTM
uses a threshold other than
"NcountingThd". The two thresholds
are used only to avoid ping-pong
effect, so the difference between the
two should not be too large.
Because the value of MBMS
"NcountingThd" is small, it is Enhanced
Identifying
recommended a Network
that theresourse:
default value WRFD- Broadcast Interval
1.
of The NRI numbers
this parameter of CS domain
be used. 01066001 Mode Type 1~5 1~5
and PS domain are independent
from each other.
2. If multiple pool areas overlap, the
Number of TRACERT packets sent Interval
NRI uniquely identify all the CN
to each TTL None None Type 1~10 1~10
nodes connected to it.
ATM
3. A CNaddress
node of canthe destination
have multiple
node
NRIs.of Inthe
oneAAL2 route.however,
pool area, The valuean
is
NRIentered
can onlyin the hexadecimal
correspond to one CN WRFD- Interval
format,
node. with the length ranging from 021302 Iu Flex Type 0~1023 0~1023
2 bytes to 21 bytes (including the 1-
byte H' prefix). It is recommended
that the initial byte of the ATM 3GPP
address uses H'45 (indicating E.164 WRFD- Specificatio Interval
Neighboring
address) or H'39 RNC(indicating
ID. the 010101 ns Type 0~4095 0~4095
Source ATM address. It should be
The
DCCparameter
address) or specifies the ATM
H'47 (indicating
input in hexadecimal format with
address corresponding
the ICD address). The ATM to theaddress RNC Node
prefix of "H'".
NodeB. It must
starting with H'45beclose
input toin seven WRFD- Redundanc Interval
1.The first byte of it is recommended
hexadecimal
and
Nrnc half
ID. bytesformat
of thewith
H'4542 bytes
must be 040202 y Type 0~4095 0~4095
to started with H'45 (indicating
including
in the BCD the prefix
code H'. It digit).
(15-bit is The
E.164 address), H'39 (indicating
recommended
following is the that DSP. the first byte
When the DSPis
DCC address) or H'47 (indicating
H'45 (indicating
is all-zero, an E.164
it is E.164e, foraddress),
example,
ICD address). When it is started Interval
H'39 (indicating a DCC address), or
0x45000971500202001F000000000
with "H'45",athe
Identifying following seven
Neighboring RNC. and None None Type 0~4095 0~4095
H'47 (indicating
0000000000000. anWhen
ICD address).
the DSP isIf ATM
a half octets must be BCD code,
the
not first byteitisisH'45,
all zero, E.164A.thenThe the ATM Transmissio
called E.164e when the last part
following
address isseven and a
allocated half bytes
uniquely in the n
DSP is full of zero, such as
(that
ATM is, 15 digits)
network. Themust H'45be a BCD
format is WRFD- Introduction
0x45000971500202001F000000000
code. If the following parts, called
recommended. 050301 Package Any Type None None
0000000000000, called E.164A
DSP, are all zeros, this address is
when the last part DSP is not full of
called E.164e, for example,
zero. H'45 is recommended. 3GPP
H'45000971500202001F000000000
Threshold
2.It should forbe deciding
allocatedwhether
in the ATM the WRFD- Specificatio
0000000000000. If the DSP are not
UE in low-mobility
network and cannot state.
be repeated. 010101 ns Any Type None ATM address
all zeros, this address is called
After the slow speed timer times out,
E.164A. The ATM address is
the UE is considered in low-mobility
assigned in the ATM network and 3GPP
state if the number of changes of
must be unique. It is recommended WRFD- Specificatio
the best cell caused by the UE
to use H'45 format. 010101 ns Any Type None 42 characters
reporting of event 1D during
[TSLOWSPDEST] is smaller than HCS
[NSLOWSPDEST]. The larger the (Hierarchica
value is, the more possibly the UE is WRFD- l Cell Interval
decided in low-mobility state. 021200 Structure) Type 1~16 1~16
NullNRI VALUE indicates that the Iu Flex Load
ue assigns load to other CN Distribution
nodes ,when NNSF selects other WRFD- Managemen Interval
CN nodes. 021306 t Type 0~1023 0~1023
Domain
Specifies the number of access Specific
classes that are restricted at a time Access
according to the flexible polling WRFD- Control Interval
restriction mode. 020114 (DSAC) Type 1~16 1~16
Domain
Specifies the number of access Specific
classes that are restricted at a time Access
according to the flexible polling WRFD- Control Interval
restriction mode. 020114 (DSAC) Type 1~16 1~16
ALL(Shield by
Alarm ID),
Minimum guarantee bandwidth Enumerati OFF(OFF),
BOARD(Shield
switch of the OAM stream None None on Type ON(ON) OFF, ON
by Board),
PORT(Shield by
Offset of Qoffset1 when neighboring
Shield type of the alarm. "ALL" Faulty Port),
cell load is heavier than that of the
indicates one shield type instead of MRFD- Managemen Enumerati DSP(Shield by ALL, BOARD,
center cell (Note: Qoffset1 is used
all types. 210304 t on Type DSP) PORT, DSP
as a priority to decide which cell will
be selected in cell selection or
Offset of Qoffset1 when neighboring
reselection) For detailed information Potential
cell load is lighter than that of the
of this parameter, refer to 3GPP TS WRFD- User Interval
center cell (Note: Qoffset1 is used
25.304. 020105 Control Type -20~20 -20~20
as a priority to decide which cell will
be selected in cell selection or
Offset of Qoffset2 when neighboring
reselection) For detailed information Potential
cell load is heavier than that of the
of this parameter, refer to 3GPP TS WRFD- User Interval
center cell (Note: Qoffset2 is used
25.304. 020105 Control Type -20~20 -20~20
as a priority to decide which cell will
be selected in cell selection or
reselection) For detailed information Potential
of this parameter, refer to 3GPP TS WRFD- User Interval
25.304. 020105 Control Type -20~20 -20~20
measurement responds to the step-
function signals is about 2.8s,
namely that the system can trace
Offset
the load of control
Qoffset2 when
effect neighboring
about 3s
cell
later after each load control.ofInthe
load is lighter than that this
center
case, thecellOLC (Note: Qoffset2
period timerislength
used
as a priority
cannot to decide
be smaller thanwhich
3s. cell will
be selected
Operator in
types. cell
The
OlcPeriodTimerLen along with selection
operator ortypes
reselection)
are as follows: For detailed information
ULOLCFTFRstrctUserNum, Potential
Offset of Sintersearch when center
of this parameter, Each
Primary refer to 3GPP TS WRFD- User Interval
cell load operator:
level is "Heavy"RAN
DLOLCFTFRstrctUserNum, (Note:system
25.304.
has only one
ULOLCFTFRSTRCTTimes, primary operator. The 020105 Control Type -20~20 -20~20
Sintersearch is used to decide
primary
whether operator
DLOLCFTFRSTRCTTimes,
to start the owns all or part of
inter-frequency
the resources
ULOLCTraffRelUserNum, of the
cell reselection). For detailed RAN system.
and Potential
Offset
The of Sintersearch
license of the when
primary center
operator
DLOLCTraffRelUserNum
information of this parameter, determine
refer WRFD- User Interval -20~20,
cell load
controls level is "Light" (Note:
the time the
to 3GPP itTS features
takes
25.304. and functions
to release the 020105 Control Type -10~10 step:2
Sintersearch
supported by istheused
RAN tosystem.
decide
uplink/downlink overload. If the OLC
whether
Secondary to start the inter-frequency
operator: Each RAN
period is excessively long, the
cell reselection).
system can have For
a detailed of
maximum Potential
may respond very slowly to
information
three secondary of thisoperators.
parameter, refer WRFD- User Interval -20~20,
overload. If the OLC period A is
to 3GPP
secondary TS 25.304. 020105 Control Type -10~10 step:2
excessivelyoperator owns part of the
short, unnecessary
resources
adjustmentofmay the occur
RAN system.
before the The
license of the secondary
previous OLC action has taken operator
controls
effect, andthetherefore
functionsthe andsystem
features WRFD- Overload Interval 100~8640000
supported
performance by isthe secondary
affected. 020107 Control Type 100~86400000 0
operator.
Outer Operator: In order to support
mobility between two RNCs, we
External
define thevirtual
operatorIP address
switched of over
the to IP Address 0.0.0.0~255.2
OMU
the target RNC as an outer None None Type None 55.255.255
operator. The outer operator is not a
primary or secondary operator of the
source
Subnet RNC.
mask of the OMU in the IP Address 0.0.0.0~255.2
Common operator: PLMN-id
external network None None Type None 55.255.255
indicated in the system broadcast
information as defined for PRIM(Primary
Security
conventional networks, which non- Operator),
MRFD- Managemen String 1~32
supporting UEs understand as the SEC(Secondary
Account of the operator 210305 t Type None characters
serving operator. If there are Operator),
multiple operators in the operator OUTER(Outer
This parameter specifies the peer
group to which the cell belongs, you MOCN Operator), PRIM, SEC,
transport channel type for the typical
are advised to configure the WRFD- Introduction Enumerati COMM(Commo OUTER,
traffic. When this typical traffic is
operators as common operators. 021311 Package on Type n Operator) COMM
applied on UL, it refers to the DL
transport channel type. When this
Cell ID +
typical traffic is applied on DL, it TRCH_DCH, TRCH_DCH,
RTT
refers to the UL transport channel Enumerati TRCH_HSDSC TRCH_HSDS
WRFD- Function R5_POSDAT
type. None None on Type H CH
020801 Based LCS R5_POSDATA_ A_SWITCH,
WRFD- OTDOA SWITCH, LAST_KNOW
020802 Based LCS LAST_KNOWN_ N_SERVICE_
This parameter specifies whether WRFD- A-GPS Bit Field SERVICE_ARE AREA_SWIT
the IE is reported to the CN. 020803 Based LCS Type A_SWITCH CH
Enumerati
Optical interface standard None None on Type SDH, SONET SDH, SONET
Azimuth of the semi-major axis of an Cell ID +
uncertain area in the cell center (the RTT
clockwise angle from the north to WRFD- Function Interval
the semi-major axis). 020801 Based LCS Type 0~179 0~179
Mobility flag of the overlay network.
This flag is valid when the
OVERLAY switch is set to ON.
When the flag is set to
NOT_FORBIDDEN, this means that, BSC/RNC One_touch(exec
when using the H service, the UE Software ute on all boards
can deliver the intra-frequency MRFD- Managemen Enumerati in all subracks), One_touch,
Operation
measurement typeand
of the command.
handover to the 210401 t on Type Step_by_Step Step_by_Step
UE_BASED,
DRNC cell, which can be used as
UE_ASSISTE
the target cell of inter-frequency
D,
handover. When the flag is set to WRFD- OTDOA Enumerati INACTIVE, INACTIVE,
UE_BASED, UE_BASED_
FORBIDDEN,
Flag of OTDOAthis meansactivation.
location that, when 020802 Based LCS on Type ACTIVE ACTIVE
UE positioning mode when the UE_ASSISTED, PREFERRED
using the H service, the UE cannot
OTDOA method is selected. The UE UE_BASED_PR ,
deliver the intra-frequency
supports both UE-based OTDOA EFERRED, UE_ASSISTE
measurement and handover to the
mode and UE-assisted OTDOA WRFD- OTDOA Enumerati UE_ASSISTED_ D_PREFERR
neighboring cell, which cannot be
mode. 020802 Based LCS on Type PREFERRED ED
used as the target cell of inter-
frequency handover.
Note that the H+CS combined Inter RNC FORBIDDEN, FORBIDDEN,
service is considered as the CS WRFD-
Soft Enumerati NOT_FORBIDD NOT_FORBI
Dynamic
service. 020203
Handover on Type NO(ATM_ADDR
EN DDEN
AAL2
ESS_DOES_NO
Connections
T_BELONG_TO
in
_THIS_ADJACE
The ownership of the AAL2 path is WRFD- Iub/IuCS/Iur Enumerati PEER(PEER), PEER,
NT_NODE),
local or peer 05030104 Interface on Type LOCAL(LOCAL) LOCAL
ATM YES(ATM_ADD
Whether to indicate that the " Transmissio RESS_BELONG
destination ATM node " is the same n S_TO_THIS_AD
as the ATM node specified by the " WRFD- Introduction Enumerati JACENT_NODE
adjacent node ID ". 050301 Package on Type ) NO, YES
CPU usage threshold for paging
flow control. When the average CPU
usage of sliding windows reaches or
exceeds the threshold, paging flow WRFD- Flow Interval
Packet queue usage threshold for
control is triggered. 040100 Control Type 30~100 30~100
recovery from paging flow control.
When the average packet queue
usage of sliding windows is lower
than the threshold, paging flow WRFD- Flow Interval
control is stopped. 040100 Control Type 30~100 30~100
IP Address 0.0.0.0~255.2
Peer IP address of the MP group. None None Type None 55.255.255
IP Re-route
Detects the IP address of the WRFD- Based on IP Address 0.0.0.0~255.2
gateway 050421 BFD/ARP Type None 55.255.255
IP Address 0.0.0.0~255.2
IP
Peer IP address None None Type None 55.255.255
Transmissio
n
Introduction
First destination IP address. The WRFD- on Iub IP Address 0.0.0.0~255.2
IP
invalid value is 0. 050402 Interface Type None 55.255.255
Transmissio
n
Introduction
Second destination IP address. The WRFD- on Iub IP Address 0.0.0.0~255.2
IP
invalid value is 0. 050402 Interface Type None 55.255.255
Transmissio
n
Introduction
The peer IP address should not be WRFD- on Iub IP Address 0.0.0.0~255.2
the same as the local address. 050402 Interface Type None 55.255.255
IP Address 0.0.0.0~255.2
Peer IP address of IPoA PVC None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Peer IP address None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Peer IP address of IPoA PVC. None None Type None 55.255.255
RNC Node
WRFD- Redundanc Enumerati INVALID(Invalid)
IP
Indicating Peer Cell Is Valid Or Not. 040202 y on Type , VALID(Valid) Valid, Invalid
Transmissio
n
Introduction
WRFD- on Iub IP Address 0.0.0.0~255.2
Subnet mask of the peer IP 050402 Interface Type None 55.255.255
ID configured in another RNC of the
RNC POOL. In RNC Node
Redundancy function, the two RNCs
form an RNC POOL and the same RNC Node
physical NodeB is configured in both WRFD- Redundanc Interval
IP
RNCs. 040202 y Type 0~65535 0~65535
Transmissio
n
Introduction
WRFD- on Iub Interval
Destination SCTP port number 050402 Interface Type 1024~65535 1024~65535
Inter-RAT
This parameter
The length of thespecifies
penalty the
timer of Handover
pending-time-after-trigger Enumerati IUB, IUPS, IUB, IUPS,
Inter-Rat handover failure for duetraffic-
to Based on
IPoA
relatedPVC peer 4Atype None None on Type OTHER OTHER
physicalevent
channel on DCH.No
failure. The
try of Service
traffic-related
Inter-Rat handover event will
4A be
on taken
DCH is WRFD- Inter-RAT
not
untilreported
penalty again during the time
finishes. 020305 Handover
This parameter specifies the
defined
Also seeby this parameter after such
parameter WRFD- Based on Interval
pending-time-after-trigger for traffic-
an event is reported. This parameter
InterRatPhyChFailNum. 020306 Load Type 0~65535 0~65535
related event 4B on DCH. The
is set to avoid too many channel
traffic-related
Strech for penalty eventof4B on DCH is
inter-RAT Inter-RAT
reconfiguration operations. The
not reported
handover againNo
failure. during
try ofthe time
inter-RAT Handover
larger the value of this parameter,
defined
handover bytothis
theparameter
penalty cellafter
willsuch
be WRFD- Based on Interval
the longer the time from the last
an event
taken untilispenalty
reported. This parameter
finishes. 020303 Coverage Type 0~300 0~300
reporting of traffic-related event 4A Dynamic
is set to avoid too many channel
on DCH to the next reporting, and Channel D250, D500, 250, 500,
reconfiguration operations. The
the smaller the possibility of Configuratio D1000, D2000, 1000, 2000,
larger the value of this parameter,
triggering traffic-related event 4A on WRFD- n Control Enumerati D4000, D8000, 4000, 8000,
the longer the time from the last
DCH. 021101 (DCCC) on Type D16000 16000
reporting of traffic-related event 4B Dynamic
on DCH to the next reporting, and Channel D250, D500, 250, 500,
the smaller the possibility of Configuratio D1000, D2000, 1000, 2000,
triggering traffic-related event 4B on WRFD- n Control Enumerati D4000, D8000, 4000, 8000,
This parameter specifies the
DCH. 021101 (DCCC) on Type D16000 16000
number of pending periods after
event A is triggered. During the
pending time, no event related to
RLC retransmission ratio is WRFD- Flow Interval
reported. 040100 Control Type 0~1000 0~1000
2B event retry period.
If theparameter
This inter-frequencyspecifieshandover
the base
on 2B fails,
number RNC triggers
of pending periods periodical
after
retry
eventalgorithm. This parameter
B is triggered. During the
defines
pending the
time,length
nothe of therelated
event event 2B
Retry period for event 2C. to
retry
RLC period. The smaller
retransmission ratio the
is value WRFD- Flow Interval
If the inter-frequency handover base IP
of this parameter, the more frequent
reported. 040100 Control Type 0~1000 0~1000
on 2C fails, RNC triggers periodical Transmissio
the handover retry due to inter-
retry algorithm. This parameter n
frequency handover failure, and the
defines the length of the event 2C Introduction
faster the UE to be successfully
retry period. WRFD- on Iub Interval
handed over to the target cell whose Inter
The
Pingsmaller the value
check period of IPofPath
this 050402 Interface Type 1~60 1~60
load is restored, thus lowering the Frequency
parameter, the more frequent the
Retry period
probability of for
callthe event
drops. In3A.this case, Hard
handover retry due to inter-
This parameter
however, frequent defines the length
handover retry of Handover
frequency handover failure, and the
the
bringsevent
more3Aloadretrytoperiod.
the RNC The WRFD- Based on Interval 500~32000,
faster the UE to be successfully
smaller
system. the value of this parameter, 020302 Coverage Type 1~64 step:500
handed over to the target cell whose
the more frequent the handover
Retry
load isperiod
restored.for the event
In this case, 3C. HCS
retry due to inter-RAT handover
This parameter
however, frequent defines the length
handover retry of (Hierarchica
failure, and the faster the UE to be
the
bringsevent
more3Cloadretrytoperiod.
the RNC The WRFD- l Cell Interval 500~32000,
successfully handed over to the
smaller
system. the value of this parameter, 021200 Structure) Type 1~64 step:500
target cell whose load is restored,
the more frequent the handover
thus lowering the probability of call Inter-RAT
retry due to inter-RAT handover Inter-RAT
drops. In this case, however, Handover
failure, and the faster the UE to be Handover
frequent handover retry brings more WRFD- Based on Interval 500~32000,
successfully handed over to the Based on
load to the RNC system. 020303 Coverage Type 1~64 step:500
target cell whose load is restored, Service
thus lowering the probability of call WRFD- Inter-RAT
drops. In this case, however, 020305 Handover
frequent handover retry brings more WRFD- Based on Interval 500~32000,
This parameter specifies the Intra RNC
load to the RNC system. 020306 Load Type 1~64 step:500
number of reporting times of event Softer
1A for periodical
Period reporting. When
common measurement WRFD- Handover
the actual reporting
protection timer coefficient.times exceedsTimer 020202 Inter RNC D1, D2, D4, D8, 1, 2, 4, 8, 16,
the
lengthset value,
of common the periodical
measurement WRFD- Soft Enumerati D16, D32, D64, 32, 64,
This parameter specifies the Intra RNC
reporting ends. = max (10000, this
report protection 020203 Handover on Type INFINITY INFINITY
number of reporting times of event Softer
parameter x common
1C for periodical measurement
reporting. When WRFD- Handover
report period).
the actual The unit
reporting timesis ms. The
exceeds 020202 Inter RNC D1, D2, D4, D8, 1, 2, 4, 8, 16,
common measurement
the set value, the periodicalreport WRFD- Soft Enumerati D16, D32, D64, 32, 64,
This parameter specifies the Intra RNC
protection
reporting ends.timer indicates the 020203 Handover on Type INFINITY INFINITY
number of reporting times of event Softer
maximum length between two valid
1J for periodical reporting. When the WRFD- Handover
common measurement reports. If
actual reporting times exceeds the 020202 Inter RNC D1, D2, D4, D8, 1, 2, 4, 8, 16,
the real time exceeds the timer
set value, the periodical reporting WRFD- Soft Enumerati D16, D32, D64, 32, 64,
length of common measurement
ends. 020203 Handover on Type INFINITY INFINITY
report protection, the common
measurement is faulty and a new
one is set up. For detailed Load
It is used to calculate the
information of this parameter, refer WRFD- Measureme Interval
corresponding dynamic persist
to 3GPP TS 25.433. 020102 nt Type 2~65535 2~65535
scaling factor for ASC2~ASC7. It is
valid for ASC2-ASC7 only and System D0.9, D0.8,
mandatory. For detailed information Information D0.7, D0.6, 0.9, 0.8, 0.7,
of this parameter, refer to 3GPP TS WRFD- Broadcastin Enumerati D0.5, D0.4, 0.6, 0.5, 0.4,
25.214. 010401 g on Type D0.3, D0.2 0.3, 0.2
Access
Uniquely identifying a PRACH in a WRFD- Class Interval
cell. 021103 Restriction Type 0~255 0~255
3GPP
Uniquely identifying an AICH in a WRFD- Specificatio Interval
cell. 010101 ns Type 0~255 0~255
3GPP
Uniquely identifying a common WRFD- Specificatio Interval
physical channel in a cell. 010101 ns Type 0~255 0~255
3GPP
Uniquely identifying a PCCPCH in a WRFD- Specificatio Interval
cell. 010101 ns Type 0~255 0~255
3GPP
Uniquely identifying a PCPICH in a WRFD- Specificatio Interval
cell. 010101 ns Type 0~255 0~255
3GPP
Uniquely identifying a PRACH in a WRFD- Specificatio Interval
cell. 010101 ns Type 0~255 0~255
3GPP
Uniquely identifying a PSCH in a WRFD- Specificatio Interval
cell. 010101 ns Type 0~255 0~255
3GPP
Uniquely identifying an SSCH in a WRFD- Specificatio Interval
cell. 010101 ns Type 0~255 0~255
3GPP
ID of the physical channel carrying WRFD- Specificatio Interval
the MCCH. 010101 ns Type 1~255 1~255
3GPP
WRFD- Specificatio Interval
Paging UE
Uniquely identifying a PICH in a cell. 010101 ns Type 0~255 0~255
Indicating the number of PIs in Idle,
contained in each frame of the PICH CELL_PCH,
For detailed information of this URA_PCH
parameter, refer to 3GPP TS WRFD- State (Type Enumerati V18, V36, V72, 18, 36, 72,
25.211. 010301 1) on Type V144 144
Difference between the transmit
power of PICH and that of PCPICH. Open Loop
For details, refer to the 3GPP TS WRFD- Power Interval
25.433 protocol. 020501 Control Type -10~5 -10~5
Interval
Whether to enable the private key
Interface Board Slot No None None Type 0~27 0~27
password
DISABLE: indicating that the private DISABLE(Disabl
key password is disabled Security ed),
ENABLE: indicating that the private MRFD- Managemen Enumerati ENABLE(Enable DISABLE,
key password is enabled 210305 t on Type d) ENABLE
Interval
Maximum packet length None None Type 10~1500 10~1500
Interval
Sent packet size None None Type 95~512 95~512
Maximum PLMN tag value
corresponding to a LAC. It is
defined by the operator. For detailed 3GPP
information of this parameter, refer WRFD- Specificatio Interval
to 3GPP TS 25.331. 010101 ns Type 1~256 1~256
Minimum PLMN tag value
Statistics period of the packet drop
corresponding to a LAC. It is
ratio. This parameter indicates the
defined by the operator. For detailed 3GPP
period for collecting the statistics
information of this parameter, refer WRFD- Specificatio Interval
information about the packet drop
to 3GPP TS 25.331. 010101 ns Type 1~256 1~256
ratio. Note that the unit of this
parameter is 100 milliseconds. The
actual delay statistics period is the
value of this parameter multiplied by Interval 100~10000,
Packet drop ratio threshold for
100 milliseconds. None None Type 1~100 step:100
speed reduction. When the packet
drop ratio exceeds the value of this
parameter, the rate of the logical
port is reduced. Note that the unit of Interval 0~1,
CPU usage threshold for
this parameter is a thousand to one. None None Type 0~1000 step:0.001
performance monitoring. When the
average CPU usage of sliding
windows reaches or exceeds the
threshold, performance monitoring WRFD- Flow Interval
Packet queue usage threshold for
is triggered. 040100 Control Type 30~100 30~100
performance monitoring. When the
average packet queue usage of
sliding windows reaches or exceeds
the threshold, performance WRFD- Flow Interval
monitoring is triggered. 040100 Control Type 30~100 30~100
CPU usage threshold for recovery
from performance monitoring. When
the average CPU usage of sliding
windows is lower than the threshold, WRFD- Flow Interval
Packet queue usage threshold for
performance monitoring is stopped. 040100 Control Type 30~100 30~100
recovery from performance
monitoring. When the packet queue
usage of sliding windows is lower
than the threshold, performance WRFD- Flow Interval
monitoring is stopped. 040100 Control Type 30~100 30~100
Faulty
MRFD- Managemen Interval
Number of the port where the alarm
Port No. of environment alarm 210304 t Type 1~32 1~32
is generated, only the ports for data
transmission are supported, such as
E1/T1 port, channelized optical port Faulty
tributary, optical port, and Ethernet MRFD- Managemen Interval
port 210304 t Type 0~335 0~335
Interval
Port number None None Type 0~11 0~11
0~1(AOUa/P
OUa),
0~3(UOIa/AO
Interval Uc/POUc),
Port number None None Type 0~7 0~7(UOIc)
ATM over
Channelized
STM-1/OC-
WRFD- 3 on Iub Interval
Port number 05030102 Interface Type 0~7 0~7
0~7(FG2a),
0~1(GOUa),
Interval 0~11(FG2c),
Ethernet port None None Type 0~11 0~3(GOUc)
Interval
FE/GE port number None None Type 0~11 0~11
0~7(FG2a),
0~1(GOUa),
Interval 0~11(FG2c),
Ethernet port None None Type 0~11 0~3(GOUc)
Enumerati
Port protocol type None None on Type IP, ATM IP, ATM
Indicates the type of the physical
port used by the local maintenance
point in the maintenance group. FE
indicates the FE port and TRUNK WRFD- Ethernet Enumerati ETHER,
indicates the aggregation group. 050425 OAM on Type ETHER, TRUNK TRUNK
Configuratio
n
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Relay switch 1 210301 t on Type OPEN(Open) OPEN
Configuratio
n
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Relay switch 2 210301 t on Type OPEN(Open) OPEN
Configuratio
n
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Relay switch 3 210301 t on Type OPEN(Open) OPEN
Configuratio
n
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Relay switch 4 210301 t on Type OPEN(Open) OPEN
Configuratio
n
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Relay switch 5 210301 t on Type OPEN(Open) OPEN
Configuratio
n
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Relay switch 6 210301 t on Type OPEN(Open) OPEN
The power offset between the last
access preamble and the message
control part. The power of the
message control part can be
obtained by adding the offset to the
access preamble power. For
The power increase step of the
detailed information of this Open Loop
random access preambles
parameter, refer to 3GPP TS WRFD- Power Interval
transmitted before the UE receives
25.213. 020501 Control Type -5~10 -5~10
the acquisition indicator in the
random access process. For
detailed information of this Open Loop
parameter, refer to 3GPP TS WRFD- Power Interval
25.211. 020501 Control Type 1~8 1~8
Interval
PPP link number of BSC. None None Type 0~499 0~499
Interval SIGNATURE
PPP link number None None Type 0~499 0~499
0,
SIGNATURE
1,
Whether to enable the PPP frame SIGNATURE
Interval
multiplexing function. If this 2,
PPP link number None None Type 0~499 0~499
parameter is setmeasurement
Inter-frequency to ENABLE, the NON_PERIODI SIGNATURE
PPP frame multiplexing
reporting interval. function is C_REPORT(No 3,
enabled. If
In periodical this parameter
report mode, is set to n periodical SIGNATURE
This parameter applies to the FG2a,
DISABLE,
interval and the
between PPP frame
two reports Enumerati Disable(Disable) Disable,
4,
GOUa, UOIa(IP) boards.isFor
the reporting),
multiplexing
configured function is disabled. None None on Type ,D250~1
Enable(Enable) Enable
SIGNATURE
the boards value.
working However,
in ATM it is not D500~2
recommended
transmission mode, that the
thisvalue
parameter D1000~3 5,
"NON_PERIODIC_REPORT"
is always set to 2. For the FG2c, be D2000~4 SIGNATURE
NON_PERIO
set,
GOUc,uponor which
POUc the UE this
board, behaviour is Interval D3000~5 6,
DIC_REPOR
not defined.is always set to 2.
parameter None None Type D4000~6
0~5 SIGNATURE
T,
0~5250, 500,
This parameter has impact on the D6000~7 7,
1000, 2000,
Uu signaling flow. If the interval is D8000~8 SIGNATURE
3000, 4000,
3GPP SIGNATURE0, 8,
too short and the frequency is too D12000~9 6000, 8000,
Uniquely identifying a PRACH in a WRFD- Specificatio Interval SIGNATURE1, SIGNATURE
high, the RNC may have burden in Inter D16000~10 12000,
cell corresponding to the AICH. 010101 ns Type 0~255
SIGNATURE2, 0~255
9,
processing signaling. If the interval Frequency D20000~11 16000,
is too long, the network cannot Hard SIGNATURE3,
D24000~12 SIGNATURE
20000,
detect the signal change in time, Handover SIGNATURE4,
D28000~13 10,
24000,
which may delay the inter-frequency WRFD- Based on Enumerati SIGNATURE5,
D32000~14 SIGNATURE
28000,
handover and thus cause call drops. 020302 Coverage on Type SIGNATURE6,
D64000 11,
32000, 64000
The maximum number of preambles
SIGNATURE7, SIGNATURE
transmitted in a preamble ramping
SIGNATURE8, 12,
cycle. For detailed information of Open Loop
SIGNATURE9, SIGNATURE
this parameter, refer to 3GPP TS WRFD- Power Interval
Sequence No. of an available SIGNATURE10, 13,
25.211. 020501 Control Type 1~64 1~64
preamble signature. A maximum of SIGNATURE11, SIGNATURE
16 signatures (from signature 0 to SIGNATURE12, 14,
15) can be selected. For detailed Open Loop SIGNATURE13, SIGNATURE
information of this parameter, refer WRFD- Power Bit Field SIGNATURE14, 15. (Multiple
to 3GPP TS 25.213. 020501 Control Type SIGNATURE15 options.)
Queuing
Indicating whether preemption is WRFD- and Pre- Enumerati
supported. 010505 Emption on Type OFF, ON OFF, ON
the following two situations, the
preempting service should have a
higher priority and ARP priority than
the preempted service does: 1.The
preempting service is the streaming
service and the preempted service
is the interactive or background
service. 2. The preempting service
is the interactive service and the Queuing
preempted service is the WRFD- and Pre- Enumerati
background service. 010505 Emption on Type OFF, ON OFF, ON
Printing control threshold. If the
CPU usage of sliding windows
reaches or exceeds the threshold,
printing flow control is triggered on WRFD- Flow Interval
the serial port. 040100 Control Type 30~100 30~100
Printing control threshold. When the
packet queue usage of sliding
windows reaches or exceeds the
threshold, printing flow control is WRFD- Flow Interval
triggered on the serial port. 040100 Control Type 30~100 30~100
Printing control threshold. If the
CPU usage of sliding windows is
lower than the threshold, printing
flow control on the serial port is WRFD- Flow Interval
stopped. 040100 Control Type 30~100 30~100
Printing control threshold. When the
packet queue usage of sliding
windows is lower than the threshold,
printing flow control on the serial WRFD- Flow Interval
port is stopped. 040100 Control Type 30~100 30~100
Whether to control
Route priority. The the printing
boards FG2a,flow WRFD- Flow Enumerati
on the serial
GOUa, port FG2c, and GOUc 040100
UOIa(IP), Control on Type ON, OFF ON, OFF
ATM
support the configuration of routes Transmissio
with different priorities. Suppose two n
or morepriority.
Route routesThe are configured
highest priorityand is WRFD- Introduction Interval
their addresses
represented and masks are the
by 0. 050301 Package Type 0~99 0~99
Reference ATM
same, and used to determine
the addresses which
of the
priority is arranged first inThese
the priority Transmissio
next hops and priorities.
sequence. n
routes can be configured in the
1.There
Priority ofare
thethree block link.
signaling priorities:
0 the WRFD- Introduction Interval
If the ARP
active and is preferably
standby mode. used,
When the
high, normal
indicates the and low.priority.
highest 050301 Package Type 0~99 0~99
priority sequence
route with is gold is
higher priority > silver >
available
2.High priority: Blocking a cell
copper.
and onlyIfthisthe route
ARPsisare all the
valid, the
immediately.
same,
systemthe TrafficClass
switches to the is usedwith
route and
3.Normal priority: Blocking a cell
the
lowerpriority
priority sequence
once theisroute with Enumerati
once there are no users in it within a HIGH(High
conversational > streaming >
higher priority fails. None None on Type HIGH, LOW HIGH, LOW
specified time, or blocking it even if priority),
interactive > background.
there are some users when the NORMAL(Norm
If the TrafficClass is preferably
specified time expires. al priority), HIGH,
used, the priority sequence is
This
4.Low parameter specifiesa the
priority: Blocking cell when WRFD- Admission Enumerati LOW(Low NORMAL,
conversational > streaming >
capability
there are no of the cells
users withcell.
in the a specific 020101 Control on Type priority) LOW
interactive > background. If the
[Service priority group Identity] for
TrafficClass factors are all the Traffic
extension services, such as CMB
same, the ARP factor is used and Priority
and MBMS. The value 0 means that
the priority sequence is gold > silver WRFD- Mapping on Enumerati ARP, ARP,
these cells do not support extension
> copper. 050424 Transport on Type TrafficClass TrafficClass
services. The value 1 indicates the
highest priority, i.e. extension Service
services are preferably absorbed by Differentiati
this group of cells. The value 7 WRFD- on based on Interval
indicates the lowest priority. 020806 SPI weight Type 0~7 0~7
COMPLETE,RNC figures that UE DATE_FOR_IU_
does not acceptspecifies
This parameter the CR ; the RST,
when it is not checked,
capability of the cells with whether
a specific DRNC_DIRECT
RNC
[Service accept the group
priority CR or Identity]
not is for _DSCR,
according
HSDPA services. to CR2284R1_SWITCH.
The value 0 RNC_SHARE_S
The relations
means that these between
cells these
do nottwo WITCH,
This
switchesparameter specifies the and
CR2284R1_SWITCH RNCAP_IMSI_H
support HSDPA services. The value
capability of the cells with a specific
CR2284R1_COMPATIBLE_SWITC O_SWITCH,
1 indicates the highest priority, i.e. Service
[Service
H priority
follows:group
are asservices Identity] for TERMINAL_VE
HSDPA are preferably Differentiati
HSUPA services. The value 0
(1)CR2284R1_COMPATIBLE_SWI RSION_DEBAS
This
absorbedparameterby thisspecifies
group ofthe cells. The WRFD- on based on Interval
means
TCH that theseRNC cells isdo not
valueis7 checked,
capability of the cells
indicates withself-
the lowest a specific
priority. 020806 SPI weight Type E_SWITCH,
0~7 0~7
support
compatible,so HSUPA services. The value
[Service prioritythe group Identity] for SYS_HO_OUT_
1 indicates the highestispriority,
CR2284R1_SWITCH invalid;i.e. Service CIPHER_SWIT
R99 non-real-time services. The
HSUPA services
(2)CR2284R1_COMPATIBLE_SWI are preferably Differentiati CH,
value 0 means that these cells do
This
absorbed
TCH parameter
is notby thisspecifies
checked, group theofthe
cells. The WRFD- on based on Interval SYS_HO_CIPH
not support R99 non-real-time
capability
value 7
CR2284R1_SWITCH of the
indicates cells
the with
lowest
is a specific
priority.
valid. 020806 SPI weight Type 0~7
ER_CONFIG, 0~7
services. The value 1 indicates the
[Service priority
12)CDT_MSG_FULL_TRACE:Whengroup Identity] for BARRED_CELL
highest priority, i.e. R99 non-real- Service
R99
ittime real-time
is checked,CDT services.
trace function 0
The value _FOR_CSDOM
services are preferably Differentiati
means
which that
starts these cells domessage
not
absorbed by tracing
this groupfrom of cells. The WRFD- on based on Interval AIN_RST,
support
RRC R99 real-time
CONNECT REQUEST.services. The CR2284R1_SWI
value 7 indicates the lowest priority. 020806 SPI weight Type 0~7 0~7
value 1 indicates the highest priority,
13)COMBINE_OPERATION_DRD_ TCH,
i.e. R99
SWITCH.When real-time services
it is on,RNC are
will not Service CDT_MSG_FUL
preferably absorbed
reject the message RB SETUP by this group of Differentiati L_TRACE,
cells. The value
CMP without the7IEindicates the
active time. WRFD- on based on Interval CR2284R1_CO
lowest priority.
14)UL_INTER_PROTECT_SWITCH 020806 SPI weight Type 0~7
MPATIBLE_SWI 0~7
.When the switch is off,RNC will not TCH,
do integrity protection check for Security COMBINE_OPE
uplink RRC messages. MRFD- Managemen String RATION_DRD_ 0~200
15)UPLINK_MDC_ENHENCEMENT
Name of the private key file 210305 t Type SWITCH,
None characters
Domain
_SWITCH.When it is checked UL_INTER_PR
Specific
,uplink MDC enhancement function OTECT_SWITC
This parameter specifies the Access
will be used. H,
processing duration of the cell WRFD- Control Interval
16)NODEB_PRIVATE_INTERFACE UPLINK_MDC_ This
blocking in the RNC. 020114 (DSAC) Type 2~30 2~30
_SWITCH.When it is checked ,the ENHENCEMEN parameter is
NodeB private interface data can be T_SWITCH, set to 0 or 1
Identifies the DSP protocol type,
taken to the NodeB or DRNC 3GPP NODEB_PRIVA according to
including ITUT(International
through the IUB or IUR protocol WRFD- Specificatio Bit Field TE_INTERFACE the related
Telecommunication Union -
message. 010101 ns Type _SWITCH domains.
Telecommunication Standardization ATM
Sector), ANSI(American National Transmissio
Standards Institute), and n ITUT(ITUT),
TTC(Telecommunication WRFD- Introduction Enumerati ANSI(ANSI), ITUT, ANSI,
After sending release request to 3.4/6.8/13.6
Technology Committee (Japan)). 050301 Package on Type TTC(TTC) TTC
RRC layer, if the Background Radio /27.2 kbit/s
Access Bear haven't been released RRC
until the Background service T2 Connection
After sending release request to
timeout, the PDCP layer will resend WRFD- and RAB Interval
RRC layer, if the Conversational 3.4/6.8/13.6
release request indication. 010510 Assignment Type 0~60 0~60
Radio Access Bear haven't been /27.2 kbit/s
released until the Conversational RRC
service T2 timeout, the PDCP layer Connection
will resend release request WRFD- and RAB Interval
After sending release request to 3.4/6.8/13.6
indication. 010510 Assignment Type 0~60 0~60
RRC layer, if the IMS Radio Access /27.2 kbit/s
Bear for signal haven't been RRC
released until the IMS service T2 Connection
timeout, the PDCP layer will resend WRFD- and RAB Interval
After sending release request to 3.4/6.8/13.6
release request indication. 010510 Assignment Type 0~60 0~60
RRC layer, if the Interactive Radio /27.2 kbit/s
Access Bear haven't been released RRC
until the Interactive service T2 Connection
timeout, the PDCP layer will resend WRFD- and RAB Interval
release request indication. 010510 Assignment Type 0~60 0~60
After sending release request to 3.4/6.8/13.6
RRC layer, if the Streaming Radio /27.2 kbit/s
Access Bear haven't been released RRC
until the Streaming service T2 Connection
timeout, the PDCP layer will resend WRFD- and RAB Interval
release request indication. 010510 Assignment Type 0~60 0~60
ALL(Select all
ATM over ports),
WRFD- E1T1 on Iub Enumerati SINGLE(Select CBR,
Port selection 05030101 Interface on Type one port) ALL, SINGLE
RT_VBR,
ALL(Select all NRT_VBR,
ALL(Select
CBR, all
ports),RT_VBR, UBR, BE,
E1/T1
NRT_VBR,ports), AF11, AF12,
Enumerati SINGLE(Select
PORT(Select
UBR, BE, AF11, all AF13, AF21,
Port selection None None on Type one port) ALL, SINGLE
ATM over E1/T1 ports
AF12, AF13, of AF22, AF23,
Channelized one
AF21,channelized
AF22, AF31, AF32,
STM-1/OC- optical port),
AF23, AF31, AF33, AF41,
WRFD- 3 on Iub Enumerati SINGLE(Select
AF32, AF33, ALL,
CBR,
AF42,PORT,
AF43,
Direct CORRM_SR
Port selection 05030102 Interface on Type one
AF41,E1/T1 port)
AF42, SINGLE
RT_VBR,
EF, LQBE,
Indicating whether to replace Signaling CORRM_SRNS NSR_PSBE_
ATM QoS CBR, RT_VBR, NRT_VBR,
relocation procedure with DSCR Connection AF43, EF,
R_PSBE_RELO LQAF11,
RELOC,
Introduction NRT_VBR, UBR, BE,
procedure between the RNC and Re- LQBE,
C, LQAF11, LQAF12,
CORRM_SR
on Hub UBR, BE, AF11, AF11, AF12,
the Neighboring RNC for PS BE WRFD- establishme Enumerati LQAF12,
CORRM_SRNS LQAF13,
NSR_PSBE_
NodeB AF12, AF13, AF13,
Traffic. 021400 nt (DSCR) on Type LQAF13,
R_PSBE_DSCR DSCR AF21,
LQAF21,
(Overbookin AF21, AF22, AF22, AF23,
ATM QoS LQAF21, LQAF22,
g on Hub AF23, AF31, AF31, AF32,
Introduction LQAF22, LQAF23,
Node B AF32, AF33, AF33, AF41,
on Hub LQAF23, LQAF31,
WCDMA R99 PS background WRFD- Transmissio Interval AF41, AF42, AF42, AF43,
NodeB LQAF31, LQAF32,
service downlink factor 050406 n) Type 0~100
AF43, EF, 0~100
EF, LQBE,
(Overbookin LQAF32, LQAF33,
g on Hub LQBE,
LQAF33, LQAF11, LQAF11,
LQAF41,
Node B LQAF12,
LQAF41, LQAF12,
LQAF42,
R99 PS background service bearer WRFD- Transmissio Enumerati LQAF13,
LQAF42, LQAF13,
LQAF43,
R99 PS background primary path
primary path 050406 n) on Type LQAF21,
LQAF43, LQEF LQAF21,
LQEF
load threshold. It is one condition for
ATM QoS LQAF22, LQAF22,
selecting the primary path or
Introduction LQAF23, LQAF23,
secondary path in the case of the ATM/IP
on Hub LQAF31, LQAF31,
establishment of the PS background WRFD- Dual Stack Interval
NodeB LQAF32, LQAF32,
service. 050404 Node B Type 0~100 0~100
(Overbookin LQAF33, LQAF33,
g on Hub LQAF41, LQAF41,
Node B LQAF42, LQAF42,
R99 PS background service bearer WRFD- Transmissio Enumerati LQAF43, LQEF, LQAF43,
R99 PS background primary
secondary path 050406 n) on Type NULL LQEF, NULL
secondary path load ratio threshold.
ATM QoS
It is one condition for selecting the
Introduction
primary path or secondary path in ATM/IP
on Hub
the case of the establishment of the WRFD- Dual Stack Interval
NodeB
PS background service. 050404 Node B Type 0~100 0~100
(Overbookin
g on Hub
Node B
WCDMA R99 PS background WRFD- Transmissio Interval
service uplink factor 050406 n) Type 0~100 0~100
Inter RNC
WRFD- Soft Interval
Primary downlink scrambling code. 020203 Handover Type 0~511 0~511
Sequence No. of a DL primary
scrambling code in a cell. For Physical
detailed
PS domain information
Relocationof this
GSM load Channel
parameter,
THD. refer to 3GPP TS WRFD- Managemen Interval
R99 PS high interactive primary
25.413.
This 022000 t Type 0~511 0~511
path parameter specifies
load threshold. the PS
It is one
domain
conditionrelocation GSMthe
for selecting load
primary
threshold. When the
path or secondary GSM
path loadcase
in the ATM/IP
policy is used, that is,ofwhen
of the establishment the PS high WRFD- Dual Stack Interval
R99 PS high interactive primary
[NcovHoOn2GldInd]
interactive service. in SET 050404 Node B Type 0~100 0~100
secondary path load ratio threshold.
INTERRATHONCOV is set to ON,
It is one condition for selecting the
the PS domain inter-system Inter-RAT
primary path or secondary path in ATM/IP
relocation out process will be Handover
the case of the establishment of the WRFD- Dual Stack Interval
stopped if the GSM system send its Based on
PS high interactive service. 050404 Node B Type 0~100 0~100
cell load to the RNC and the cell Service
load exceeds the PS domain Reloc WRFD- Inter-RAT
GSM load THD. Otherwise, the 020305 Handover
RNC does not stop the PS domain WRFD- Based on Interval
When detecting that the Ps' 3.4/6.8/13.6
inter-system relocation out process. 020306 Load Type 0~100 0~100
Background User had no data to /27.2 kbit/s
transfer for a long time which longer RRC
than this timer, the PDCP layer Connection
would request the RRC layer to WRFD- and RAB Interval
release this Radio Access Bear. 010510 Assignment Type 0~14400 0~14400
When detecting that the Ps' 3.4/6.8/13.6
Conversational User had no data to /27.2 kbit/s
transfer for a long time which longer RRC
than this timer, the PDCP layer Connection
would request the RRC layer to WRFD- and RAB Interval
When detecting that the Ps' IMS 3.4/6.8/13.6
release this Radio Access Bear. 010510 Assignment Type 0~14400 0~14400
signal had no data to transfer for a /27.2 kbit/s
long time which longer than this RRC
timer, the PDCP layer would request Connection
the RRC layer to release this Radio WRFD- and RAB Interval
When detecting that the Ps' 3.4/6.8/13.6
Access Bear. 010510 Assignment Type 0~64800 0~64800
Interactive User had no data to /27.2 kbit/s
transfer for a long time which longer RRC
than this timer, the PDCP layer Connection
would request the RRC layer to WRFD- and RAB Interval
When detecting that the Ps' 3.4/6.8/13.6
release this Radio Access Bear. 010510 Assignment Type 0~14400 0~14400
Streaming User had no data to /27.2 kbit/s
transfer for a long time which longer RRC
than this timer, the PDCP layer Connection
would request the RRC layer to WRFD- and RAB Interval CBR,
release this Radio Access Bear. 010510 Assignment Type 0~14400 0~14400
RT_VBR,
Iu Flex Load NRT_VBR,
Indicating whether the PS domain Distribution CBR, RT_VBR, UBR, BE,
permits the CN information to WRFD- Managemen Enumerati NRT_VBR, AF11, AF12,
CBR,
update . 021306 t on Type UBR, BE, AF11,
OFF, ON AF13,
OFF, AF21,
ON
RT_VBR,
ATM QoS AF12, AF13, AF22, AF23,
Iu Flex Load CBR, RT_VBR, NRT_VBR,
Introduction AF21, AF22, AF31, AF32,
Distribution NRT_VBR, UBR, BE,
on Hub AF23, AF31, AF33, AF41,
Ps domain Information Update WRFD- Managemen Interval UBR, BE, AF11, AF11, AF12,
NodeB AF32, AF33, CBR,
AF42, AF43,
protection timer. 021306 t Type AF12,
60~900AF13, AF13,
60~900AF21,
(Overbookin AF41, AF42, RT_VBR,
EF, LQBE,
ATM QoS AF21, AF22, AF22, AF23,
g on Hub AF43, EF, NRT_VBR,
LQAF11,
Introduction AF23, AF31, AF31, AF32,
Node B CBR,
LQBE,RT_VBR,
LQAF11, UBR, BE,
LQAF12,
on Hub AF32, AF33, AF33, AF41,
WCDMA R99 PS interactive service WRFD- Transmissio Interval NRT_VBR,
LQAF12, AF11, AF12,
LQAF13,
NodeB AF41, AF42, CBR,
AF42, AF43,
downlink factor 050406 n) Type UBR,
0~100BE, AF11,
LQAF13, AF13,
0~100 AF21,
LQAF21,
(Overbookin AF43, EF, RT_VBR,
EF, LQBE,
ATM QoS AF12, AF13,
LQAF21, AF22, AF23,
LQAF22,
g on Hub CBR,
LQBE,RT_VBR,
LQAF11, NRT_VBR,
LQAF11,
Introduction AF21, AF22,
LQAF22, AF31, AF32,
LQAF23,
Node B NRT_VBR,
LQAF12, UBR, BE,
LQAF12,
on Hub AF23, AF31,
LQAF23, AF33, AF41,
LQAF31,
WCDMA R99 PS interactive service WRFD- Transmissio Interval UBR, BE, AF11,
LQAF13, AF11, AF12,
LQAF13,
NodeB AF32, AF33,
LQAF31, AF42, AF43,
LQAF32,
uplink factor 050406 n) Type AF12,
0~100 AF13,
LQAF21, AF13,
0~100 AF21,
LQAF21,
(Overbookin AF41, AF42,
LQAF32, EF, LQBE,
LQAF33,
ATM QoS AF21, AF22,
LQAF22, AF22, AF23,
LQAF22,
g on Hub AF43, EF,
LQAF33, LQAF11,
LQAF41,
Introduction AF23, AF31,
LQAF23, AF31, AF32,
LQAF23,
Node B LQBE, LQAF11,
LQAF41, LQAF12,
LQAF42,
on Hub AF32, AF33,
LQAF31, AF33, AF41,
LQAF31,
R99 PS high PRI interactive primary WRFD- Transmissio Enumerati LQAF12,
LQAF42,
AF41, AF42,
LQAF13,
LQAF43,
AF42, AF43,
NodeB LQAF32, LQAF32,
path 050406 n) on Type LQAF13,
LQAF43, LQAF21,
(Overbookin AF43, EF,LQEF
LQAF33,
LQEF
EF, LQBE,
LQAF33,
ATM QoS LQAF21, LQAF22,
g on Hub LQBE, LQAF11,
LQAF41, LQAF11,
LQAF41,
Introduction LQAF22, LQAF23,
Node B LQAF12,
LQAF42, LQAF12,
LQAF42,
on Hub LQAF23, LQAF31,
R99 PS high PRI interactive WRFD- Transmissio Enumerati LQAF13,
LQAF43, LQEF, LQAF13,
LQAF43,
NodeB LQAF31, LQAF32,
secondary path 050406 n) on Type LQAF21,
NULL LQAF21,
LQEF, NULL
(Overbookin LQAF32, LQAF33,
ATM QoS LQAF22, LQAF22,
g on Hub LQAF33, LQAF41,
Introduction LQAF23, LQAF23,
Node B LQAF41, LQAF42,
on Hub LQAF31, LQAF31,
R99 PS low PRI interactive primary WRFD- Transmissio Enumerati LQAF42, LQAF43,
NodeB LQAF32, LQAF32,
path 050406 n) on Type LQAF43, LQEF LQEF
(Overbookin LQAF33, LQAF33,
g on Hub LQAF41, LQAF41,
Node B LQAF42, LQAF42,
R99 PS low PRI interactive WRFD- Transmissio Enumerati LQAF43, LQEF, LQAF43,
secondary path 050406 n) on Type NULL LQEF, NULL
LQAF12, LQAF13,
AF41, AF42, AF42, AF43,
LQAF13, LQAF21,
AF43, EF, EF, LQBE,
ATM QoS LQAF21, LQAF22,
LQBE, LQAF11, LQAF11,
Introduction LQAF22, LQAF23,
LQAF12, LQAF12,
on Hub LQAF23, LQAF31,
LQAF13, LQAF13,
NodeB LQAF31, LQAF32,
LQAF21, LQAF21,
(Overbookin LQAF32, LQAF33,
ATM QoS LQAF22, LQAF22,
g on Hub LQAF33, LQAF41,
Introduction LQAF23, LQAF23,
Node B LQAF41, LQAF42,
on Hub LQAF31, LQAF31,
R99 PS middle PRI interactive WRFD- Transmissio Enumerati LQAF42, LQAF43,
NodeB LQAF32, LQAF32,
primary path 050406 n) on Type LQAF43, LQEF LQEF
(Overbookin LQAF33, LQAF33,
g on Hub LQAF41, LQAF41,
Node B LQAF42, LQAF42,
R99 PS middle PRI interactive WRFD- Transmissio Enumerati LQAF43, LQEF, LQAF43,
R99 PS low interactive primary path
secondary path 050406 n) on Type NULL LQEF, NULL
load threshold. It is one condition for
selecting the primary path or
secondary path in the case of the ATM/IP
establishment of the PS low WRFD- Dual Stack Interval
R99 PS low interactive primary
interactive service. 050404 Node B Type 0~100 0~100
secondary path load ratio threshold.
It is one condition for selecting the
primary path or secondary path in ATM/IP
the case of the establishment of the WRFD- Dual Stack Interval
R99 PS middle interactive primary
PS low interactive service. 050404 Node B Type 0~100 0~100
path load threshold. It is one
condition for selecting the primary
path or secondary path in the case ATM/IP
of the establishment of the PS WRFD- Dual Stack Interval
R99 PS middle interactive primary
middle interactive service. 050404 Node B Type 0~100 0~100
secondary path load ratio threshold.
It is one condition for selecting the
SUPP_NONE
primary path or secondary path in ATM/IP
,
the case of the establishment of the WRFD- Dual Stack Interval
This parameter specifies feature SUPP_IUFLE
PS middle interactive service. 050404 Node B Type 0~100 0~100
mode of operators in the PS SUPP_NONE, X,
domain. You should configure the WRFD- Iu Flex SUPP_IUFLEX, SUPP_MOCN
network resource identifier (NRI) 021302 MOCN SUPP_MOCN, ,
when MOCN or Iu-Flex is WRFD- Introduction Enumerati SUPP_IUFLEX_ SUPP_IUFLE
supported. 021311 Package on Type MOCN X_MOCN
WRFD- Iu Flex
021302 MOCN
Threshold of PS call drop ratio per
Network Resource Identity(NRI) WRFD- Introduction Interval
CPUS to report KPI alarm.In a 3.4/6.8/13.6
length for PS domain. 021311 Package Type 1~10 1~10
checking period, if the ratio is higher /27.2 kbit/s
The minimum number of PS RAB
than this threshold and the number RRC
establish request per CPUS to
of PS call release is higher than the Connection
report KPI alarm. In a checking
related threshold, the KPI alarm of WRFD- and RAB Interval
period,if the number of PS RAB 3.4/6.8/13.6
PS call drop ratio is reported. 010510 Assignment Type 0~100 0~100
establish request is higher than the /27.2 kbit/s
threshold and the PS RAB setup RRC
Threshold of PS RAB setup
successful ratio is lower than this Connection
successful ratio per CPUS to report
threshold,the KPI alarm of PS RAB WRFD- and RAB Interval
KPI alarm. In a checking period,if 3.4/6.8/13.6
setup ratio is reported. 010510 Assignment Type 0~65534 0~65534
the ratio is lower than this threshold /27.2 kbit/s
and the number of PS RAB RRC
The minimum number of PS call
establish request is higher than the Connection
release per CPUS to report KPI
related threshold,the KPI alarm of WRFD- and RAB Interval
alarm.In a checking period, if the 3.4/6.8/13.6
PS RAB setup ratio is reported. 010510 Assignment Type 0~100 0~100
number of PS call release is higher /27.2 kbit/s
than the related threshold and the RRC
PS call drop ratio is higher than this Connection
threshold, the KPI alarm of PS call WRFD- and RAB Interval
drop ratio is reported. 010510 Assignment Type 0~65534 0~65534
handover
When the is disabled.
switch is on and the RAB
Service
downsizing handoverlicenserefers to the the
is activated,
handover attribute and
initial speed is determined on the related
parameter
basis of cellconfiguration on the
resources. Downsizing
network
is side forfor
implemented eachBEservice.
services.When
a service is established, the related
5) CBR,
measurements and inter-RAT
PS_RSC_FEEDBK_RABSETUP_C Domain RT_VBR,
handover
ACFAIL_SWITCH: are immediately When the triggered.
switch Specific NRT_VBR,
These
Specifies two switches
whether
is on, the SF feedback function to are enabled
impose theis Access CBR, RT_VBR, UBR, BE,
only
access for restriction
supported. service
If thehandover;
SFonisthe PS generally,
provided in WRFD- Control Enumerati NRT_VBR, AF11,
FALSE,AF12,
they
domain.
feedbackare disabled
information by default.
after the 020114 (DSAC) on Type UBR, BE,
FALSE, AF11,
TRUE AF13,
TRUE AF21,
Domain AF12, AF13, AF22, AF23,
Note that the
application forservice
the cellhandover
SF is is
Specific AF21, AF22, AF31, AF32,
enabled
rejected,only access when at a the handover
lower speed is Access AF23, AF31, AF33, AF41,
attribute
performed is setthe to
Whether toon imposebasis of the
the access WRFD- Control Enumerati AF32, AF33, FALSE,
CBR,
AF42, AF43,
HO_TO_GSM_SHOULD_BE_PERF
returned SF.
restriction on the PS domain. 020114 (DSAC) on Type FALSE, TRUE
AF41, AF42, TRUE
RT_VBR,
EF, LQBE,
ORM and PS service inter-RAT
6) ATM QoS CBR,
handover is set to ON. Both
PS_STREAM_IU_QOS_NEG_SWIT Inter-RAT AF43,RT_VBR,
EF, NRT_VBR,
LQAF11,
Introduction NRT_VBR, UBR, BE,
conditions
CH: When are the mandatory.
switch is on,For the Iu Handover LQBE, LQAF11, LQAF12,
on Hub
hybrid
QoS Negotiationthe
services, service
function is applied WRFD- Based on Enumerati UBR, BE, AF11,
LQAF12, AF11, AF12,
LQAF13,
NodeB AF12, AF13, AF13, AF21,
handover
to is not triggered.
the PS STREAM service if 020305 Service on Type LQAF13,
OFF, ON LQAF21,
OFF, ON
(Overbookin AF21, AF22, AF22, AF23,
Alternative RAB Parameter Values ATM QoS LQAF21, LQAF22,
g on Hub AF23, AF31, AF31, AF32,
IE is present in the RANAP RAB Introduction LQAF22, LQAF23,
Node B AF32, AF33, AF33, AF41,
ASSIGNMENT REQUEST on Hub LQAF23, LQAF31,
WCDMA R99 PS streamingorservice WRFD- Transmissio Interval AF41, AF42, AF42, AF43,
RELOCATION NodeB LQAF31, LQAF32,
downlink factor REQUEST 050406 n) Type 0~100
AF43, EF, 0~100
EF, LQBE,
message. (Overbookin LQAF32, LQAF33,
7) g on Hub LQBE, LQAF11,
LQAF33, LQAF11,
LQAF41,
PS_BE_STRICT_IU_QOS_NEG_S Node B LQAF12,
LQAF41, LQAF12,
LQAF42,
PS_BE_EXT
R99
WITCH: PS streaming
When the switch serviceisbearer on, the WRFD- Transmissio Enumerati LQAF13,
LQAF42, LQAF13,
LQAF43,
RA_LOW_RA
R99 PS streaming primary path load
primary
strict path
Iu QoS 050406 n) on Type LQAF21,
LQAF43, LQEF LQAF21,
LQEF
threshold. It isNegotiation
one condition function
for is PS_BE_EXTRA TE_ACCESS
applied ATM QoS LQAF22, LQAF22,
selectingtothe theprimary
PS BE path service,RNC
or _LOW_RATE_A _SWITCH,
select Iu max bit rate based onthe
UE Introduction LQAF23,
CCESS_SWITC LQAF23,
PS_BE_INIT_
secondary path in the case of ATM/IP
capacity,cell capacity,max bitrate on Hub LQAF31,
H, LQAF31,
RATE_DYNA
establishment of the PS streaming WRFD- Dual Stack Interval
and alternative RAB parameter NodeB LQAF32,
PS_BE_INIT_R LQAF32,
MIC_CFG_S
service. 050404 Node B Type 0~100 0~100
values in RANAP RAB (Overbookin LQAF33,
ATE_DYNAMIC LQAF33,
WITCH,
ASSIGNMENT REQUEST or g on Hub LQAF41,
_CFG_SWITCH, LQAF41,
PS_BE_IU_Q
RELOCATION REQUEST Node B LQAF42,
PS_BE_IU_QO LQAF42,
OS_NEG_S
R99
message.PS streaming
When the service
switchbeareris not WRFD- Transmissio Enumerati LQAF43, LQEF,
S_NEG_SWITC LQAF43,
WITCH,
R99 PS streaming primary
secondary
on, the loose path Iu load
QoS ratioNegotiation 050406 n) on Type NULL
H, LQEF, NULL
PS_RAB_DO
secondary path threshold.
ATM QoS
function is applied for
It is one condition to the PS BEthe
selecting PS_RAB_DOW WNSIZING_S
Introduction
service,RNC
primary path or select Iu max path
secondary bit rate
in ATM/IP NSIZING_SWIT WITCH,
on Hub
based
the case onofUE the capacity,max
establishment bitrate
of the WRFD- Dual Stack Interval CH, PS_RSC_FE
NodeB
and alternativeservice.
PS streaming RAB parameter 050404 Dynamic
Node B Type PS_RSC_FEED
0~100 EDBK_RABS
0~100
(Overbookin
values in RANAP RAB Channel BK_RABSETUP ETUP_CACF
g on Hub
ASSIGNMENT REQUEST or Configuratio _CACFAIL_SWI AIL_SWITCH,
Node B
RELOCATION REQUEST n Control TCH, PS_STREAM
WCDMA R99 PS streaming service WRFD- Transmissio Interval
message,not consider cell (DCCC) PS_STREAM_I _IU_QOS_NE
uplink factor 050406 n) Type 0~100 0~100
capacity,this can avoid Iu QoS RAB Quality U_QOS_NEG_S G_SWITCH,
Renegotiation between different WRFD- of Service WITCH, PS_BE_STRI
cell.The switch is valid when 021101 Renegotiati PS_BE_STRICT CT_IU_QOS_
PS_BE_IU_QOS_NEG_SWITCH is WRFD- on over Iu Bit Field _IU_QOS_NEG NEG_SWITC
set to ON. 010506 Interface Type _SWITCH H
License
MRFD- Managemen Interval
Max throughput of PS. 210403 t Type 0~8040000 0~8040000
Enumerati
Ethernet port type None None on Type FE, GE FE, GE
Security
MRFD- Managemen String 0~200
Name of the certificate file 210305 t Type None characters
Security
MRFD- Managemen Password 0~64
Private key password 210305 t Type None characters
Security
MRFD- Managemen Password 1~32
Password 210305 t Type None characters
BIT0, BIT1, BIT0, BIT1,
BIT6, BIT7, BIT6, BIT7,
Security
BIT8, BIT9, BIT8, BIT9,
Minimum length of the user MRFD- Managemen Interval 6~32
BIT14, BIT15, BIT14, BIT15,
password
This parameter is used to inform the 210305 t Type 6~32 characters
BIT16, BIT17, BIT16, BIT17,
UE of the method for translating the BIT22, BIT23, BIT22, BIT23,
received Transmit Power Control Faulty BIT24, BIT25, BIT24, BIT25,
BIT0, BIT1, BIT0, BIT1,
(TPC) commands.
First alarm switch ofInpower
other words, it MRFD- Managemen Bit Field BIT29, BIT30, BIT29, BIT30,
BIT2, BIT3, BIT2, BIT3,
is used to select
distribution UL power
monitoring boardcontrol 210304 t Type BIT31 BIT31
BIT4, BIT5, BIT4, BIT5,
algorithm. When using the
BIT6, BIT7, BI16, BIT7,
ALGORITHM1, the UE adjusts the
Faulty BIT8, BIT9, BIT8, BIT9,
uplink transmit power for every
Second alarm switch of power MRFD- Managemen Bit Field BIT10, BIT11, BIT10, BIT11,
timeslot. When using the
distribution monitoring board 210304 t Type BIT12 BIT12
ALGORITHM2, the UE adjusts the
uplink transmit power on a 5- ALGORITHM
timeslot cycle. For details of this Inner Loop 1,
parameter, refer to the 3GPP TS WRFD- Power Enumerati ALGORITHM1, ALGORITHM
25.214. 020504 Control on Type ALGORITHM2 2
Minimum DSCP of queue 0. The IP
packets with DSCP in a relation that
"Min DSCP of queue 0" <= DSCP Interval
<= 63 is added to queue 0. None None Type 0~63 0~63
Minimum DSCP of queue 1. The IP
packets with DSCP in a relation that
"Min DSCP of queue 1" <= DSCP <
"Min DSCP of queue 0" is added to Interval
queue 1. None None Type 0~63 0~63
45: -1.5
46: -1
47: -0.5
48: 0
49: (spare)
...
Function set of the adjacent node
Minimum 98: (spare)
supportedDSCP by local of BSC6900.
queue 2. The When IP
packets with DSCP in a relation that 99: (spare)
the parameter is set to CS1, it
"Min
indicates DSCP thatof the
queue local2"BSC6900
<= DSCPis<
"Min DSCP of queue 1" is added to Interval When CPICH
interconnected to the adjacent node
queue 2. None None Type 0~63 RSCP
0~63 (FDD)
by
Minimum using the DSCP CS1ofprotocol queue 3. version.
The IP
This parameter defines the to CPICH is employeed,
When
packets the parameter
with DSCP inisaset relation CS2, thatit
Minimum
Ec/No DSCP
access of queueof4.the
threshold The IP
cell. unit for Qhcs
indicates
"Min DSCP thatof the
queue local3"BSC6900
<= DSCPis<
packets
The UE with camp
can DSCPon in thea relation
cell only that is dBm,
interconnected
"Min DSCP of queue to the 2" adjacent
is added nodeto Interval
"Min DSCP
when the of queueCPICH
measured 4" <= DSCP Ec/No<is physical value
by
queue using 3. the CS2 protocol version. None None Type 0~63 0~63
"Min DSCP
greater ofthequeue 3"ofisthis
added to for each
The CS2than protocol value
version is
queue
parameter. 4. The IP packets with DSCP parameter
backward compatible with the CS1.
in
For a FDD
relation cells,thatthe 0 <= cellDSCPselection < "Min value is:
By default, the parameter is set to
DSCP ofSqueue
criterion in the 4" is added
25.304 to is
protocol Interval 0: -115
CS2. When the peer is not Dynamic
queue 5.as follows:
defined None None Type 0~63 1: -114
0~63
compatible with the local CS2 AAL2
Srxlev>0 2: -113
messagesAND (theSqual>0
peer does not Connections CS1(CS1
Where: :
process the compatible domain in Version),
-according
Squal = Qqualmeas - Qqualmin 88: -27
to protocol requirements), WRFD- Iub/IuCS/Iur Enumerati CS2(CS2
-the Srxlev = Qrxlevmeas - Qrxlevmin 89: -26
protocol version is set to CS1. - 05030104 Interface on Type Version) CS1, CS2
Pcompensation 90: -(spare)
Offset
This between indicates
parameter the neighboring that in the 91: -(spare)
- Qqualmeas is the measured cell
GSM
CELL_FACH cell and connection
WCDMA cell. mode, the :
quality value, namely CPICH Ec/No.
This
measurement
Quality specifies
threshold the offset
hysteresis
for HCS ofofthe
the UE WRFD- Inter RNC Interval 98: -(spare)
- Qrxlevmeas is the measured cell
measurement
is 1.level
It is used value of the RSCP
reselection.
RX
Quality value,when
threshold namely
of
CPICH
HCS CPICH
cell
010802 Cell Update Type 0~99 99: -(spare)
neighboring
is used in cellGSM selectioncell signal
and quality.
RSCP.
This parameter
reselection. It can indicates
be used that
to in the HCS
This parameter
reselection is used for This
measurement. RSSI
-CELL_PCH
Qrxlevmin
calculate the is
or the
URA_PCH
quality minimum
level of required
the (Hierarchica
measurement.
parameter isinnot The offset is when
configured
quality
connection
specified cell level mode, the
in HCS cell.
the measurement
reselection cell H WRFD- l Cell Interval
subtracted
the from
value is 255. = the neighboring
- Pcompensation
hysteresis
rules. of the UE before
is 1. It is used 021200 Structure) Type 0~99 0~99
measurement
Otherwise, the greater the value cell
max(UE_TXPWR_MAX_RACH-
when CPICH RSCP is used in cell
reselection.
This
parameter parameter valueindicates
is, the harder that inthe the
P_MAX,
selection 0)
and reselection
In cell
CELL_FACH
cell reselection
selection connection
happens. algorithm, Formode, thisthe
detailed
-measurement.
UE_TXPWR_MAX_RACH Thisfor parameter is the
is not
parameter
measurement
information, isrefer
used
hysteresis
to 3GPP movingof the theUE
maximum
configured TXwhen power the level
value aTSUE
is 255.may WRFD- Intra RNC Interval
border
is 2. It ofused
is a cell.when Content:CPICH During cell
25.304.
use when accessing
Otherwise, the greater the thecell on is
EcNo 010801 Cell Update Type 0~40,255 {0~40}, {255}
selection
used in or selection
cell resection,and the larger the
RACH,
This
parameter namely indicates
parameter that inthe the
value
reselection of thevalueparameter,is, the harder
measurement. theThissmaller
MaxAllowedULTxPower.
CELL_PCH
cell selection orhappens.
URA_PCH For detailed
the probability
parameter of configured
selecting inter-RAT
P_MAX isismode,
-connection
information, thenot
refer maximumthe RF when
TSoutput
measurement
neighboring
the value is cells. to
255. The 3GPP smaller the WRFD- Intra RNC Interval
power
hysteresis
25.304. of the of UE.
the UE is 2. It is used 010801 Cell Update Type 0~40,255 {0~40}, {255}
value
Otherwise, of the parameter,
the greater the
the larger
As
when for CPICH
the impact EcNo onisnetwork
used in cell
the probability
parameter value of is,selecting
the harder inter-RAT
the
performance:
selection and reselection
neighboring
cell selection cells.
happens. This parameter
For detailed
The larger the value
measurement. of the
This parameter is not
can be configured
information, refer toby3GPPthe network
TS it is WRFD- Intra RNC Interval
parameter
configured is, when the the more valuedifficult
is 255.
planner
25.304. according to reality. 010801 Cell Update Type 0~40,255 {0~40}, {255}
for the UE to
Otherwise, the campgreater on the the cell. The
For details, refer to 3GPP TS
smaller
parameter thevalue
valueis, of the
the harder
parameter the
25.331.
is,
cellthe easier ithappens.
selection is for theFor UEdetailed
to camp
As for the impact on network
on the cell. But
information, refer if the
to 3GPPvalue TS is WRFD- Intra RNC Interval
performance:
excessively
25.304. small, it is possible that 010801 Cell Update Type 0~40,255 {0~40}, {255}
The larger the value of the
the UE cannot receive the system
parameter, the lower the probability
messages carried by PCCPCH.
of selecting neighboring cells. The
When this parameter is not set to
smaller the value the parameter, the WRFD- Inter RNC Interval
any value, the UE adopts the
higher the probability of doing so. 010802 Cell Update Type -50~50 -50~50
corresponding value of the current
serving cell, added through the ADD
UCELLSELRESEL command.
Generally, this parameter is not set WRFD- Inter RNC Interval
to any value. 010802 Cell Update Type -24~0 -24~0
"Qqualmin"
Ec/No is greater should thanbe the
considered
value of
along with eachThe
this parameter. other. higher the
As for the impact
parameter value is, onthe network
more difficult
performance:
it is for the UE to reside in the cell.
The larger the value of
lower parameter the is, the
value
This parameter indicates whether to
parameter
easier it is for is, the
the more
UE todifficult
reside init isthe
configure the minimum quality level.
for
cell,the butUE it istopossible
camp onthat thethe cell.UE
The
When it is set to FALSE, the UE
smaller
cannot receivethe value theofsystem
the parameter
adopts the corresponding value of TRUE(Configure
is, the easier
messages it is
that areforsent
the through
UE to camp the
the current serving cell, added the minimum
on the cell.For
PCCPCH. Butdetailed
if the value is
information, WRFD- Intra RNC Interval
through the ADD UCELLSELRESEL quality
excessively
refer to the 3GPP small, TS it is25.304.
possible that 010801 Cell Update Type -24~0 -24~0
command. This parameter is threshold),
the UE cannot receive the system
generally set to FALSE. When it is FALSE(Not
messages carried by PCCPCH.
set
The tominimum
TRUE, the UE adopts
required the configure the
When this parameter isRX notthreshold
set to
value in
corresponding ADD UEXT3GCELL
to CPICH WRFD- Inter RNC Enumerati minimum quality TRUE,
any value, the UE adoptsRSCP. the The
Minimum
command. RX level of the GSM cell. 010802 Cell Update on Type threshold) FALSE
UE can camp on
corresponding the of
value cellthe
only when
current
Before the UE camps on the cell,
the
servingmeasured
cell, addedCPICH RSCPthe
through is ADD
take the measurement of the signal
greater
UCELLSELRESEL than the value of this
command.
quality in the cell. If the quality is
parameter.
Generally, this Theparameter
setting of Qrxlevmin
is not set WRFD- Inter RNC Interval
better than this parameter, this
should
to any value.be related to Qqualmin. The 010802 Cell Update Type -58~-13 -58~-13
indicates that the cell can obtain -115~-25,
higher the parameter is, the more
better QoS and the UE is allowed to Inter-RAT step:2 Actual
difficult it is for the UE to reside in
camp on this cell. Otherwise, the UE Handover value = -115
the cell. The lower parameter is, the
cannot obtain good QoS in this cell WRFD- Based on Interval + (58 + GUI
easier it is for the UE to reside in the
and does not camp on the cell. 020303 Coverage Type -58~-13 value) * 2
cell, but it is possible that the UE
cannot receive the system
messages that are sent through the
PCCPCH. For detailed information, WRFD- Intra RNC Interval -115~-25,
refer to 3GPP TS 25.304. 010801 Cell Update Type -58~-13 step:2
3GPP
A timer used for data forwarding in WRFD- Specificatio Interval
relocation procedure. 010101 ns Type 1~20000 1~20000
String 1~31
Remark None None Type None characters
License
Whether to resume broken MRFD- Managemen Enumerati NO(No),
download 210403 t on Type YES(Yes) NO, YES
3GPP
WRFD- Specificatio Interval
Uniquely identifies an RNC. 010101 ns Type 0~4095 0~4095
Interval
Uniquely identifying an RNC. None None Type 0~4095 0~4095
Cell
WRFD- Broadcast IP Address 0.0.0.0~255.2
IP address of the RNC 011000 Service Type None 55.255.255
RNC Node
WRFD- Redundanc Interval
RNC Pool index. 040202 y Type 0 0
TERMCONVCA LLEST,
LLEST, EMERGCALL
TERMSTREAM EST,
CALLEST, INTERRATC
TERMINTERCA ELLRESELE
LLEST, ST,
TERMBKGCALL INTERRATC
EST, ELLCHGORD
RNC Node EMERGCALLES EREST,
WRFD- Redundanc String T, REGISTEST,
1~20
RNC Pool name. 040202 y Type INTERRATCELL
None DETACHEST,
characters
RESELEST, ORIGHIGHP
INTERRATCELL RIORSIGEST
3GPP CHGORDERES ,
Protocol version supported by the WRFD- Specificatio Enumerati R99, R4, R5,
T, REGISTEST, R99, R4, R5,
ORIGLOWPR
neighboring RNC. 010101 ns on Type R6, R7
DETACHEST, R6, R7
IORSIGEST,
ORIGHIGHPRIO CALLREEST,
Security RSIGEST, TERMHIGHP
MRFD- Managemen String ORIGLOWPRIO RIORSIGEST
0~200
Name of the root certificate file 210305 t Type RSIGEST,
None ,characters
CALLREEST, TERMLOWP
TERMHIGHPRI RIORSIGEST
ORSIGEST, ,
Speed reduction alarm report Interval
This parameter specifies the cause 3.4/6.8/13.6 TERMLOWPRI TERMCAUSE
The minimum number of RRC
threshold None None Type 20~99 20~99
of RRC connection establishment, /27.2 kbit/s ORSIGEST, UNKNOWN,
connection request per CPUS to
that is, the value of the RRC TERMCAUSEU MBMSCALLE
report KPI alarm. In a checking
Establishment cause IE in the RRC Connection NKNOWN, ST,
period,if the number of RRC
CONNECTION REQUEST WRFD- and RAB Enumerati MBMSCALLEST DEFAULTES
connection request is higher than 3.4/6.8/13.6
message. 010510 Assignment on Type , DEFAULTEST T
the threshold and the RRC /27.2 kbit/s
connnection setup successful ratio RRC
Threshold of RRC connection setup
is lower than the related Connection
successful ratio per CPUS to report
threshold,the KPI alarm of RRC WRFD- and RAB Interval
KPI alarm. In a checking period,if 3.4/6.8/13.6
connection setup ratio is reported. 010510 Assignment Type 0~65534 0~65534
the ratio is lower than this threshold /27.2 kbit/s
and the number of RRC connection RRC
request is higher than the related Connection
threshold,the KPI alarm of RRC WRFD- and RAB Interval
connection setup ratio is reported. 010510 Assignment Type 0~100 0~100
Wait time in RRC connection reject
message, the time period the UE
has to wait before repeating the 3GPP
rejected procedure of RRC WRFD- Specificatio Interval
connection 010101 ns Type 0~15 0~15
3GPP
A timer used to wait for initial direct WRFD- Specificatio Interval
transmission. 010101 ns Type 1~10000 1~10000
A timer used to wait for the Iu
release command message 3GPP
responding to Iu release request WRFD- Specificatio Interval
message. 010101 ns Type 1~10000 1~10000
Enumerati OFF(OFF),
Parameter 1 reserved for future use. None None on Type ON(ON) OFF, ON
3GPP
WRFD- Specificatio Interval 0~429496729
Reserved parameter 2. 010101 ns Type 0~4294967295 5
Enumerati OFF(OFF),
Parameter 2 reserved for future use. None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Parameter 3 reserved for future use. None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Parameter 4 reserved for future use. None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Parameter 5 reserved for future use. None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Parameter 6 reserved for future use. None None on Type ON(ON) OFF, ON
Interval 0~429496729
Parameter 7 reserved for future use. None None Type 0~4294967295 5
Interval 0~429496729
Parameter 9 reserved for future use. None None Type 0~4294967295 5
NON-
REVERTIVE(NO
N-REVERTIVE), NON-
Recovery mode of the MSP Enumerati REVERTIVE(RE REVERTIVE,
IP
protection group None None on Type VERTIVE) REVERTIVE
Routing context. The routing context Transmissio
identifies a specified route. If the n
routing context is to be configured, Introduction
its value must be negotiated WRFD- on Iu Interval 0~429496729
Proportion of the RTCP bandwidth IP
between the two ends. 050409 Interface Type 0~4294967295 5
in the Iu CS bandwidth. For Transmissio
example, when the value is 1, it n
indicates that the allocated RTCP Introduction
Enhanced
path bandwidth is 1% of the RTP WRFD- on Iu Interval
Timer for state transition from CPC WRFD- CELL-FACH
path bandwidth. 050409 Interface Type 1~5 1~5
to E_FACH of real-time services, 010688 CPC - DTX /
This
usedparameter is valid the
to check whether onlyUE
when
in the WRFD- DRX
CNDomainId
CELL_DCH(with is set to state with
CPC) 010686 CPC - HS-
"CS_DOMAIN"
real-time services andis TnlBearerType
in the stable WRFD- SCCH less Interval
Timer for state transition from CPC
is
lowset to "IP_TRANS".
activity state. When this 010687 operation Type 1~65535 1~65535
to FACH of real-time services, used CPC - DTX /
parameter is set to "ON", the
to check whether the UE in the WRFD- DRX
performance data such as the
CELL_DCH(with CPC) state with 010686 CPC - HS-
number of lost packets, rate of lost
real-time services is in the stable WRFD- SCCH less Interval
packets, round trip time (RTT), IP
low activity state. 010687 operation Type 1~65535 1~65535
delay jitter on each IP path are Transmissio
calculated according to the RTCP n
message. The information is then Introduction
analyzed for evaluating the network WRFD- on Iu Enumerati
operating status. 050409 Interface on Type OFF, ON OFF, ON
IP Address 0.0.0.0~255.2
destination IP address. None None Type None 55.255.255
IP Address 0.0.0.0~255.2
Timer for state transition from DCH
routing mask. None None Type None 55.255.255
or HSPA to E_FACH of real-time
services, used to check whether the
UE in the CELL_DCH state with
real-time services is in the stable WRFD- Enhanced Interval
low activity state. 010688 CELL-FACH Type 1~65535 1~65535
UE State in
Connected
Timer for state transition from DCH Mode
or HSPA to FACH of real-time (CELL-
services, used to check whether the DCH, CELL-
UE State in
UE in the CELL_DCH state with PCH, URA- D8, D16, D32,
Connected
real-time services is in the stable WRFD- PCH, CELL- Interval D64, D128,
Pending time after the traffic volume Mode
low activity state. 010202 FACH) Type D256, D512,
1~65535 8, 16, 32, 64,
1~65535
event 4B for state transition from (CELL-
D1024, D2k, 128, 256,
DCH or HSPA to FACH transition is DCH, CELL- D250, D500, 250, 500,
UE State in D3k, D4k, D6k, 512, 1024,
reported. This parameter is used to PCH, URA- D1000, D2000, 1000, 2000,
Connected D8k, D12k, 2k, 3k, 4k, 6k,
prevent too many traffic volume WRFD- PCH, CELL- Enumerati D4000, D8000, 4000, 8000,
This parameter is used to check Mode D16k, D24k, 8k, 12k, 16k,
events 4B being reported. 010202 FACH) on Type D16000 16000
whether the UE in the low activity (CELL- D32k, D48k, 24k, 32k, 48k,
state. If the UE is on DCH or HSPA DCH, CELL- D64k, D96k, 64k, 96k,
When the traffic volume is below the UE State in
channel, the low activity counter PCH, URA- D128k, D192k, 128k, 192k,
4B threshold and remains so for the Connected D0, D10, D20, 0, 10, 20, 40,
increases by 1 every time traffic WRFD- PCH, CELL- Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
period specified by this parameter, Mode D40, D60, D80, 60, 80, 100,
volume event 4B is reported. 010202 FACH) on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
the event 4B is reported. This (CELL- D100, D120, 120, 160,
D512, D1024, 128, 256,
parameter prevents unnecessary DCH, CELL- D160, D200, 200, 240,
D2k, D3k, D4k, 512, 1024,
traffic volume events that are PCH, URA- D240, D320, 320, 640,
Enhanced D6k, D8k, D12k, 2k, 3k, 4k, 6k,
caused by traffic volume instability WRFD- PCH, CELL- Enumerati D640, D1280, 1280, 2560,
WRFD- CELL-FACH D16k, D24k, 8k, 12k, 16k,
from being triggered. 010202 FACH) on Type D2560, D5000 5000
This parameter specifies the 010688 CPC - DTX / D32k, D48k, 24k, 32k, 48k,
This parameter specifies the
threshold of the traffic volume of 4A WRFD- DRX D64k, D96k, 64k, 96k,
occurrence time of 4A event for
event for triggering the transition of 010686 CPC - HS- D128k, D192k, 128k, 192k,
triggering the transition of real-time Enhanced D0, D10, D20, 0, 10, 20, 40,
real-time services from E_FACH to WRFD- SCCH less Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
services from E_FACH to HSPA WRFD- CELL-FACH D40, D60, D80, 60, 80, 100,
HSPA with CPC technology. 010687 operation on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
with CPC technology. This 010688 CPC - DTX / D100, D120, 120, 160,
D512, D1024, 128, 256,
parameter prevents unnecessary WRFD- DRX D160, D200, 200, 240,
D2k, D3k, D4k, 512, 1024,
reports that are caused by traffic 010686 CPC - HS- D240, D320, 320, 640,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
volume instability from being WRFD- SCCH less Enumerati D640, D1280, 1280, 2560,
D16k, D24k, 8k, 12k, 16k,
triggered. 010687 operation on Type D2560, D5000 5000
This parameter specifies the D32k, D48k, 24k, 32k, 48k,
threshold of the traffic volume of 4A D64k, D96k, 64k, 96k,
This parameter specifies the
event for triggering the transition of D128k, D192k, 128k, 192k,
occurrence time of 4A event for D0, D10, D20, 0, 10, 20, 40,
real-time services from E_FACH to WRFD- Enhanced Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
triggering the transition of real-time D40, D60, D80, 60, 80, 100,
DCH or HSPA. 010688 CELL-FACH on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
services from E_FACH to DCH or D100, D120, 120, 160,
D512, D1024, 128, 256,
HSPA. This parameter prevents D160, D200, 200, 240,
D2k, D3k, D4k, 512, 1024,
unnecessary reports that are D240, D320, 320, 640,
D6k, D8k, D12k, 2k, 3k, 4k, 6k,
caused by traffic volume instability WRFD- Enhanced Enumerati D640, D1280, 1280, 2560,
D16k, D24k, 8k, 12k, 16k,
from being triggered. 010688 CELL-FACH on Type D2560, D5000 5000
This parameter specifies the CPC - DTX / D32k, D48k, 24k, 32k, 48k,
threshold of the traffic volume of 4A WRFD- DRX D64k, D96k, 64k, 96k,
This parameter specifies the
event for triggering the transition of 010686 CPC - HS- D128k, D192k, 128k, 192k,
occurrence time of 4A event for D0, D10, D20, 0, 10, 20, 40,
real-time services from FACH to WRFD- SCCH less Enumerati D16, D32,
D256k, D64,
D384k, 256k, 384k,
triggering the transition of real-time D40, D60, D80, 60, 80, 100,
HSPA with CPC technology. 010687 operation on Type D128,
D512k,D256,
D768k 16, 32,768k
512k, 64,
services from FACH to HSPA with CPC - DTX / D100, D120, 120, 160,
D512, D1024, 128, 256,
CPC technology. This parameter WRFD- DRX D160, D200, 200, 240,
UE State in D2k, D3k, D4k, 512, 1024,
prevents unnecessary reports that 010686 CPC - HS- D240, D320, 320, 640,
Connected D6k, D8k, D12k, 2k, 3k, 4k, 6k,
are caused by traffic volume WRFD- SCCH less Enumerati D640, D1280, 1280, 2560,
Mode D16k, D24k, 8k, 12k, 16k,
instability from being triggered. 010687 operation on Type D2560, D5000 5000
This parameter specifies the (CELL- D32k, D48k, 24k, 32k, 48k,
threshold of the traffic volume of 4A DCH, CELL- D64k, D96k, 64k, 96k,
This parameter specifies the UE State in
event for triggering the transition of PCH, URA- D128k, D192k, 128k, 192k,
occurrence time of 4A event for Connected D0, D10, D20, 0, 10, 20, 40,
real-time services from FACH to WRFD- PCH, CELL- Enumerati D256k, D384k, 256k, 384k,
triggering the transition of real-time Mode D40, D60, D80, 60, 80, 100,
DCH or HSPA. 010202 FACH) on Type D512k, D768k 512k, 768k
services from FACH to DCH or (CELL- D100, D120, 120, 160,
HSPA. This parameter prevents DCH, CELL- D160, D200, 200, 240,
unnecessary reports that are PCH, URA- D240, D320, 320, 640,
caused by traffic volume instability WRFD- PCH, CELL- Enumerati D640, D1280, 1280, 2560,
from being triggered. 010202 FACH) on Type D2560, D5000 5000
It is used to calculate the round-trip
time of the protocol stack and the IP
RTO value. The value must be Transmissio
smaller than "RTOBETA". In the n
It is used to calculate the round-trip
case of the fixed value of the Introduction
time of the protocol stack and the
"RTOBETA", the larger the value is, WRFD- on Iub Interval
RTO value. The value must be IP
the less the link delay sensitivity is. 050402 Interface Type 0~100 0~100
greater than "RTOALPHA". In the Transmissio
case of the fixed value of the n
"RTOALPHA", the larger the value Introduction
is, the less the link delay sensitivity WRFD- on Iub Interval
IP
is. 050402 Interface Type 0~100 0~100
Transmissio
When the "RTOMIN" and n
"RTPMAX" parameters are set to Introduction
fixed values, the larger the value is, WRFD- on Iub Interval
IP
the longer the check of the link is. 050402 Interface Type 500~60000 500~60000
Transmissio
When the "RTOMIN" parameter is n
set to a fixed value, the larger the Introduction
value is, the longer the check of the WRFD- on Iub Interval
IP
link is. 050402 Interface Type 500~60000 500~60000
Transmissio
When the "RTOMAX" parameter is n
set to a fixed value, the larger the Introduction
value is, the longer the check of the WRFD- on Iub Interval
link is. 050402 Interface Type 500~60000 500~60000
ATM
Transmissio
n
WRFD- Introduction Interval 0~429496729
Logical port speed increase step.
Route logical number 050301 Package Type 0~4294967295 5
When detecting the available
bandwidth increase through IPPM,
Bandwidth increase step adjustment
the system increases the bandwidth
period. This parameter indicates the
of the logical port by using this Interval
period to increase the bandwidth of
parameter. None None Type 0~1000 0~1000
the logical port. Note that the actual
bandwidth increase step adjustment
period is the packet drop ratio
Statistics period multiplied by this Interval
IP
parameter value. None None Type 1~100 1~100
Transmissio
ATM QoS
n
Introduction
Introduction
on Hub
WRFD- on Iub Interval
NodeB
Receive bandwidth of IP path 050402 Interface Type 1~3000000 1~3000000
(Overbookin
g on Hub
Node B
WRFD- Transmissio Interval
Receive bandwidth 050406 n) Type 0~4000000 0~4000000
ATM over
WRFD- E1T1 on Iub Enumerati OFF(OFF),
Scramble switch 05030101 Interface on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Scramble switch None None on Type ON(ON) OFF, ON
Faulty
Start serial number of the alarm MRFD- Managemen Interval 1~214748364
IP
record 210304 t Type 1~2147483646 6
Transmissio
n
SCTP link number of XPU board. Introduction
This number identifies an SCTP link WRFD- on Iub Interval
uniquely. 050402 Interface Type 0~1199 0~1199
Faulty
Start date of the alarm record. By MRFD- Managemen Compound 2000-1-
default, the start date is 2000-01-01. 210304 t Type year, month, day 1~2037-12-31
Faulty
Start date of the alarm record. By MRFD- Managemen Compound 2000-1-
default, the start date is 2000-01-01. 210304 t Type year, month, day 1~2037-12-31
Faulty
Maximum number of days for MRFD- Managemen Interval
storing history alarms 210304 t Type 7~90 7~90
1E-3, 1E-4,
1E-3, 1E-4, 1E- 1E-5, 1E-6,
Enumerati 5, 1E-6, 1E-7, 1E-7, 1E-8,
SD alarm triggering threshold None None on Type 1E-8, 1E-9 1E-9
Configuratio
n
Start date of the daylight saving MRFD- Managemen Interval
time (DST) 210301 t Type 1~31 1~31
Interval
Number of the slot None None Type 0~5,8~27 0~5, 8~27
Configuratio 0, 2, 4, 6, 8,
n 0,2,4,6,8,10,12, 10, 12, 14,
MRFD- Managemen Interval 14,16,18,20,22, 16, 18, 20,
Number of the slot 210301 t Type 24,26 22, 24, 26
0, 2, 4, 6, 8,
0,2,4,6,8,10,12, 10, 12, 14,
Interval 14,16,18,20,22, 16, 18, 20,
CPUS/MPU subsystem slot No. None None Type 24,26 22, 24, 26
0, 2, 4, 8, 10,
0,2,4,8,10,12,14 12, 14, 16,
Interval ,16,18,20,22,24, 18, 20, 22,
No. of the slot of the board. None None Type 26 24, 26
Faulty
Number of the slot where the alarm MRFD- Managemen Interval
is generated 210304 t Type 0~27 0~27
Number of the slot where the alarm
is generated, the number of the slot Faulty
where the OMU board is positioned MRFD- Managemen Interval
is not supported 210304 t Type 0~27 0~27
0, 2, 4, 8, 10,
0,2,4,8,10,12,14 12, 14, 16,
Slot number for running this Interval ,16,18,20,22,24, 18, 20, 22,
command None None Type 26 24, 26
Interval
Number of the subrack None None Type 0~11 0~11
Interval
Number of the subrack None None Type 0~11 0~11
Interval
subrack No. None None Type 0~11 0~11
Interval
No. of the subrack. None None Type 0~11 0~11
Interval
Number of the subrack. None None Type 0~11 0~11
Faulty
MRFD- Managemen Enumerati DES(Descent),
Sequence of alarm records 210304 t on Type ASC(Ascent) DES, ASC
Offset of the SSCH transmit power Open Loop
from the PCPICH
Threshold transmit
for inter-RAT cellpower in WRFD- Power Interval -35~15, step:
a cell.
reselection. When the quality 020501 Control Type -350~150 0.1
(CPICH Ec/No measured by UE) of
the serving cell is lower than this Faulty
threshold
CPU usage plus the clearance
alarm [Qqualmin] of the MRFD- Managemen Interval
CPU
cell, usage
the alarm threshold.
inter-RAT When
cell reselection
threshold 210304 t Type 20~99 20~99
the CPU usage
procedure will beexceeds
started.the This Conversatio
threshold,
parameter aisCPU usage alarm
not configured whenis its
WRFD- nal QoS
reported. "CPU occupancy
value is 127. This parameter is not alarm Faulty
010501 Class
clearance
configuredthreshold"
when its value is smaller
is 127. than MRFD- Managemen Interval
WRFD- Streaming
"CPU occupancy alarm threshold".
The intra-frequency cell reselection 210304 t Type 30~100 30~100
010502 QoS Class
has
Thisaparameter
priority higher than the
specifies the type
inter-of WRFD- Interactive
frequency
source. cell reselection and inter- 010503 QoS Class
RAT cell reselection,
- SPEECH: speech service the intra- WRFD- Background Enumerati SPEECH, SPEECH,
frequency
- UNKNOWN: cell non-speech
reselection start service 010504 QoS Class on Type UNKNOWN UNKNOWN
threshold should be higher than the
DSP usage alarm
inter-frequency cellclearance
reselection start
threshold. When
threshold and inter-RAT the DSPcell usage is Faulty
lower than
reselection the threshold, the DSPcell MRFD- Managemen Interval
DSP usage start alarm threshold.
threshold.If When
the
usage alarm
reselection is cleared.
threshold is set 210304 t Type 20~99 20~99
the DSP usage exceeds theto a
comparatively
threshold, a DSP highusage
value,alarm
the UEis
Intra-system HCS cell reselection
may frequently
reported. "DSP start cell alarm
occupancy Faulty
start threshold. When Srxlev of the
reselections, and the is
clearance threshold" battery
smaller of than
the MRFD- Managemen Interval
serving cell is less than this
UE
"DSP may be largelyalarm
occupancy consumed. If the
threshold". 210304 t Type 30~100 30~100
parameter, the UE starts the intra-
cell reselection threshold is set to a
frequency and inter-frequency HCS
comparatively low value, it is difficult
measurements so that better cells (Hierarchica
for cell reselections to be started,
can be selected. For details, refer to WRFD- l Cell Interval -105~91,
and the UE may not timely reside in
3GPP TS 25.304. 021200 Structure) Type -53~45 step:2
the cells with good quality, affecting
the quality of communication
between the UTRAN and the UE.
For detailed information, refer to WRFD- Intra RNC Interval {-32~20},
3GPP TS 25.304. 010801 Cell Update Type -16~10,127 {127}, step:2
Configuratio
n
MRFD- Managemen Interval
Number of the subsystem 210301 t Type 0~7 0~7
Interval
CPUS/MPU subsystem No. None None Type 0~7 0~3
Faulty
Start synchronization number of the MRFD- Managemen Interval 1~214748364
alarm record 210304 t Type 1~2147483646 6
Configuratio
n
MRFD- Managemen Compound HOUR, MIN, HOUR, MIN,
Start of DST 210301 t Type SEC SEC
The operation time of the log record 2000-1-1
should be after this time. If this Security year, month, 00:00:00~203
parameter is not specified, the start MRFD- Managemen Compound date, hour, min, 7-12-31
time is not limited. 210305 t Type sec 23:59:59
If the time mode is set to
"DAILY_T", "WEEKLY_T", or
"MONTHLY_T", you should set this Compound
parameter. None None Type hour, min 00:00~23:59
The operation time of the log record 2000-1-1
should be after this time. If this Security year, month, 00:00:00~203
parameter is not specified, the start MRFD- Managemen Compound date, hour, min, 7-12-31
time is not limited. 210305 t Type sec 23:59:59
Faulty
Start time of the alarm record. By MRFD- Managemen Compound 00:00:00~23:
default, the start time is 00:00:00. 210304 t Type hour, min, sec 59:59
Service type in the ATM. CBR and
RTVBR carry real-time services.
Faulty
CBR and RTVBR are usually carried
Start time of the alarm record. By MRFD- Managemen Compound 00:00:00~23:
on the user planes of the Iur/Iub and
default, the start time is 00:00:00. 210304 t Type hour, min, sec 59:59
Iu-CS interfaces. NRTVBR and UBR
When a DCH is set up, the UE Dynamic
carry non-real-time services. UBR, CBR, UBR, CBR,
starts counting the number of faulty Channel
NRTVBR and UBR are usually RTVBR, RTVBR,
CRCs within a specified sliding Configuratio
carried on the user plane and Enumerati NRTVBR, NRTVBR,
window. If the number of faulty n Control
control plane of the Iu-PS interface. None None on Type UBR_PLUS UBR_PLUS
CRCs exceeds the specified (DCCC)
threshold, event 5A is triggered. The WRFD- Inter-RAT
length of the sliding window is 021101 Handover
specified by Statistic Block Number WRFD- Based on Interval
For 5A Event. 020309 DL QoS Type 1~512 1~512
Faulty
MRFD- Managemen Interval
When the parameter is set to
Start number of the alarm record 210304 t Type 1~65535 1~65535
INACTIVE, the GPS frame timing
measurement is not activated. WRFD- OTDOA
When the parameter is set to 020802 Based LCS
ACTIVE, the GPS frame timing WRFD- A-GPS Enumerati INACTIVE, INACTIVE,
measurement is activated. 020803 Based LCS on Type ACTIVE ACTIVE
Multi-Carrier
Start time of the first interval when Switch off
the "Cell dynamic shutdown" feature WRFD- Based on Compound
is valid. 020117 Traffic Load Type HOUR, MIN 00:00~23:59
Multi-Carrier
Start time of the second interval Switch off
when the "Cell dynamic shutdown" WRFD- Based on Compound
feature is valid. 020117 Traffic Load Type HOUR, MIN 00:00~23:59
Multi-Carrier
Start time of the third interval when Switch off
the "Cell dynamic shutdown" feature WRFD- Based on Compound
is valid. 020117 Traffic Load Type HOUR, MIN 00:00~23:59
3GPP
WRFD- Specificatio Interval
CN protection timer. 010101 ns Type 1000~300000 1000~300000
Security
Start date. The input format is MRFD- Managemen Compound 2000-1-
YYYY&MM&DD. 210305 t Type year, month, day 1~2037-12-31
ATM
Transmissio
Whether to enable the signaling n
point with the signaling transfer WRFD- Introduction Enumerati OFF(OFF),
function 050301 Package on Type ON(ON) OFF, ON
The MAC-c on Iub interface will
Traffic D0, D8, D16, D0, D8, D16,
increase after the Enhanced
This parameter specifies the DL Priority D32, D64, D128, D32, D64,
CELL_FACH is supported in the
MBR of streaming for DRNC HSPA WRFD- Mapping on Enumerati D144, D256, D128, D144,
cell. When the UE enters the
This
User.parameter specifies the rate 050424 Transport on Type D384 D256, D384
Enhanced CELL_FACH state, this
threshold of 2ms TTI on the E-DCH
parameter determines the
for HSUPA streaming service. When
guaranteed speed of the MAC-c
the cell capability and UE capability
flow that sends streaming service WRFD- Enhanced Interval
allows 2ms TTI, 2ms TTI on the E-
data on the Iub interface. 010688 CELL-FACH Type 1~1000 1~1000
DCH is used if the PS streaming
The MAC-c on Iub interface will
service carried on HSUPA with D8, D16, D32,
increase after the Enhanced
uplink rate isn't less than this Streaming D64, D128, 8, 16, 32, 64,
CELL_FACH is supported in the
threshold. Otherwise, 10ms TTI is WRFD- Traffic Class Enumerati D144, D256, 128, 144,
cell. When the UE enters the
used. 010632 on HSUPA on Type D384, D608 256, 384, 608
Enhanced CELL_FACH state, this
parameter determines the maximum
speed of the MAC-c flow that sends
streaming service data on the Iub WRFD- Enhanced Interval
interface. 010688 CELL-FACH Type 1~2000 1~2000
Traffic D0, D8, D16, D0, D8, D16,
This parameter specifies the UL Priority D32, D64, D128, D32, D64,
MBR of streaming for DRNC HSPA WRFD- Mapping on Enumerati D144, D256, D128, D144,
User. 050424 Transport on Type D384 D256, D384
Security
Start time. The input format is MRFD- Managemen Compound 00:00:00~23:
HH&MM&SS. 210305 t Type hour, min, sec 59:59
This parameter indicates whether Physical
the SCCPCH uses STTD or not. For Channel
detailed information of this WRFD- Managemen Enumerati TRUE,
parameter,
This parameter specifies the logical 022000
refer to 3GPP 25.346. t on Type TRUE, FALSE FALSE
serial number of a subflow for the STTD_Supporte STTD_Suppo
typical RAB. A bearer
This parameter maywhether
indicates use Inter RNC d, rted,
several subflows the
the cell supports for transmission.
space time WRFD- Soft Enumerati STTD_not_Supp STTD_not_S
For example,
transmit AMR
diversity speech service
(STTD). 020203 Handover on Type orted upported
may use three traffic subflows, Conversatio
Physical STTD_Supporte STTD_Suppo
which correspond to three transport WRFD- nal QoS
Channel d, rted,
channels. Subflows 0, 1, and 2 carry 010501 Class
This parameter indicates whether WRFD- Managemen Enumerati STTD_not_Supp STTD_not_S
bit flows of classes A, B, and C WRFD- Streaming
STTD TX diversity is supported. 022000 t on Type orted upported
respectively. For other types of 010502 QoS Class
RABs, there is only one subflow. WRFD- Interactive
FP MUX for
Therefore, the traffic subflow index 010503 QoS Class
IP
is set to 0, which corresponds to WRFD- Background Interval
Maximum sub-frame length. This Transmissio
one transport channel. 010504 QoS Class Type 0~2 0~2
parameter indicates the maximum n
sub-frame length for multiplexing. If WRFD- UDP MUX
the length of a sub-frame exceeds 050420 for Iu-CS
this value, the sub-frame is not WRFD- Transmissio Interval
multiplexed. 050412 n Type 16~1023 16~1023
Interval
Number of the scheduled subtask None None Type 1~50 1~50
Interval 1~124,
subnet No. in a BSC. None None Type 1~124,128~189 128~189
Cell
This parameter specifies whether
Indicating whether the cell supports WRFD- Broadcast Enumerati TRUE,
the NodeB allows setting of the 3.4/6.8/13.6
the CBS service. 011000 Service on Type TRUE, FALSE FALSE
downlink DPCH spreading factor to /27.2 kbit/s
512. If this parameter is set to RRC
TRUE, the NodeB allows setting of Connection
the downlink DPCH spreading factor WRFD- and RAB Enumerati FALSE,
to 512. 010510 Assignment on Type FALSE, TRUE TRUE
Faulty
Operating state of the environment MRFD- Managemen Enumerati CLOSE(CLOSE) CLOSE,
alarm port 210304 t on Type , OPEN(OPEN) OPEN
If this parameter is set to "ON", you
must set "OMU automatic
SUN(Sunday),
switchover interval". Otherwise,
MON(Monday),
"OMU automatic switchover interval" Enumerati
TUE(Tuesday),
is not displayed. None None on Type ON, OFF ON, OFF
WED(Wednesda
Configuratio y), SUN, MON,
n THU(Thursday), TUE, WED,
MRFD- Managemen Enumerati FRI(Friday), THU, FRI,
Weekday on which DST starts 210301 t on Type SAT(Saturday) SAT
Configuratio
n
MRFD- Managemen Enumerati CLOSE,
State of the panel port switch 210301 t on Type CLOSE, OPEN OPEN
Enumerati ON(ON),
Switch for the OMU self-healing None None on Type OFF(OFF) ON, OFF
Enumerati OFF(OFF),
Set patch switch parameter1 None None on Type ON(ON) OFF, ON
Interval 0~429496729
Set patch switch parameter10 None None Type 0~4294967295 5
Enumerati OFF(OFF),
Set patch switch parameter2 None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Set patch switch parameter3 None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Set patch switch parameter4 None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Set patch switch parameter5 None None on Type ON(ON) OFF, ON
Enumerati OFF(OFF),
Set patch switch parameter6 None None on Type ON(ON) OFF, ON
Interval 0~429496729
Set patch switch parameter7 None None Type 0~4294967295 5
Interval 0~429496729
Set patch switch parameter8 None None Type 0~4294967295 5
Interval 0~429496729
Set patch switch parameter9 None None Type 0~4294967295 5
Security
Whether to enable the local user MRFD- Managemen Enumerati OFF(Off),
FIRST(First),
management function 210305 t on Type ON(On) OFF, ON
SECOND(Secon FIRST,
Configuratio d), SECOND,
n THIRD(Third), THIRD,
MRFD- Managemen Enumerati FOURTH(Fourth FOURTH,
Sequence of the start week of DST 210301 t on Type ), LAST(Last) LAST
BSC/RNC
Software
MRFD- Managemen Enumerati TRUE,
Automatic synchronization flag 210401 t on Type TRUE, FALSE FALSE
Faulty
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
Temperature alarm switch 210304 t on Type OPEN(Open) OPEN
Faulty
MRFD- Managemen String 1~9
Upper limit of temperature 210304 t Type None characters
Offset of HCS cell CPICH RSCP
measurement value in cell selection
Faulty
or reselection.
MRFD- Managemen
AMR/WB- String 1~9
The larger the value of the
Lower limit of temperature 210304 tAMR Type None characters
parameter, the lower the probability
of selecting neighboring cells. The Speech
HCS D3~0 D6~1
Offset of cell CPICH Ec/No
smaller the value of the parameter, Rates
(Hierarchica D9~2 D12~3 3, 6, 9, 12,
measurement value in cell selection
the higher the probability of doing WRFD- Control
lDynamic
Cell Enumerati D15~4 D18~5 15, 18, 21,
or reselection.
This
so. parameter is valid when the 021200 Inter
Structure) on Type D21~6 INFINITY INFINITY
The larger the value of the Channel
corresponding parameter related to Frequency
parameter, the lower the probability Configuratio
HCS D2~0 D3~1
the reporting period unit for the Hard
of selecting neighboring cells. The n Control
(Hierarchica D4~2 D6~3 2, 3, 4, 6, 8,
event E of AMR service is set to Handover
smaller the value the parameter, the WRFD- (DCCC)
l Cell Enumerati D8~4 D10~5 10, 12,
TEN_MSEC. The DL code TX WRFD- Based on
This parameter
higher is validofwhen
the probability doingthe
so. 021200 Inter
Structure) on Type D12~6 INFINITY INFINITY
power is reported periodically after 020701 DL QoS
corresponding parameter related to Frequency
the event Ea is reported. This WRFD- Inter-RAT
the reporting period unit for the Hard
parameter specifies the reporting 020304 Handover
event E of BE service is set to Handover
period. If the parameter is set to A, WRFD- Based on Interval 10~60000,
TEN_MSEC. The DL code TX WRFD- Based on
This parameter
the reporting is valid
period is Awhen
x 10 the
ms. 020309 DL QoS Type 1~6000 step: 10
power is reported periodically after 021101 DL QoS
corresponding parameter related to
the event Ea is reported. This WRFD- Inter-RAT
the reporting period unit for the
parameter specifies the reporting 020304 Handover
event F of BE service is set to
period. If the parameter is set to A, WRFD- Based on Interval 10~60000,
TEN_MSEC. The DL code TX
the reporting period is A x 10 ms. 020309 DL QoS Type 1~6000 step: 10
power is reported periodically after Dynamic
the event Fa is reported. This Channel
parameter specifies the reporting Configuratio
period. If the parameter is set to A, WRFD- n Control Interval 10~60000,
the reporting period is A x 10 ms. 021101 (DCCC) Type 1~6000 step: 10
DL basic common measurement
report cycle. For detailed Load
information of this parameter, refer WRFD- Measureme Interval 10~60000,
to 3GPP TS 25.433. 020102 nt Type 1~6000 step:10
Measurement report period of event
E triggered by DL OLC. For detailed Load
information of this parameter, refer WRFD- Measureme Interval 10~60000,
to 3GPP TS 25.433. 020102 nt Type 1~6000 step:10
Measurement report period of event
E triggered by DL OLC. For detailed Load
information of this parameter, refer WRFD- Measureme Interval 10~60000,
to 3GPP TS 25.433. 020102 nt Type 1~6000 step:10
This parameter specifies the
HSDPA bit rate measurement report
period. For detailed information of Load
this parameter, refer to 3GPP TS WRFD- Measureme Interval 10~60000,
25.433. 020102 nt Type 1~6000 step:10
HSDPA power requirement
measurement report period For
detailed information of this Load
parameter, refer to 3GPP TS WRFD- Measureme Interval 10~60000,
25.433. 020102 nt Type 1~6000 step:10
This parameter specifies the
HSUPA bit rate measurement report
period. For detailed information of Load
this parameter, refer to 3GPP TS WRFD- Measureme Interval 10~60000,
25.433. 020102 nt Type 1~6000 step:10
UL basic common measurement
report cycle. For detailed Load
information of this parameter, refer WRFD- Measureme Interval 10~60000,
This parameter
to 3GPP is valid when the
TS 25.433. 020102 nt Type 1~6000 step:10
corresponding parameter related to
Measurement report period of event
the reporting period unit for the
E triggered by UL OLC. For detailed Load
event E of VP service is set to
information of this parameter, refer WRFD- Measureme Interval 10~60000,
TEN_MSEC. The DL code TX Inter
to 3GPP TS 25.433. 020102 nt Type 1~6000 step:10
power is reported periodically after Frequency
Time window for estimating whether
the event Ea is reported. This Hard
the UE is in high-mobility state.
parameter specifies the reporting Handover
The start point of the estimation is
period. If the parameter is set to A, WRFD- Based on Interval 10~60000,
the moment of the last reporting of
This parameter
the reporting indicates
period is A xwhether
10 ms. 020304 DL QoS Type 1~6000 step: 10
event 1D, and the backdated time
the SCCPCH involves the TFCI.
length is determined by this HCS
When the downlink blind transport
parameter. If the parameter is set to (Hierarchica
format detection function is used,
0, the RNC does not decide whether WRFD- l Cell Interval
the TFCI is unavailable. For detailed
the UE is in high-mobility state. 021200 Structure) Type 0~511 0~511
information of this parameter, refer
to 3GPP TS 25.433. Physical
Note: This parameter is configured Channel
only for the SCCPCH in the formats WRFD- Managemen Enumerati EXISTS, EXISTS,
This parameter defines the number
8 to 17. 022000 t on Type NOT_EXISTS NOT_EXISTS
of the transport formats
corresponding to the RLC size in the Transport
TF set. For detailed information of Channel
this parameter, refer to 3GPP TS WRFD- Managemen Enumerati
25.302. 021000 t on Type D1, D2, D3 1, 2, 3
This parameter defines the number Transport
of the transport formats Channel
corresponding to the above RLC WRFD- Managemen Enumerati
size in the TF set. 021000 t on Type D1, D2 1~2
ACTIVE(Active
OMU),
Enumerati STANDBY(Stan ACTIVE,
Target OMU None None on Type dby OMU) STANDBY
Interval
TGW ID None None Type 0~255 0~255
This parameter indicates the
address of the operation and IP Address 0.0.0.0~255.2
maintenance console for TGW. None None Type None 55.255.255
Security NOLIMIT(No
Whether to limit the operation time MRFD- Managemen Enumerati Limit), NOLIMIT,
of the operator 210305 t on Type LIMIT(Limit) LIMIT
Interval
Timeout time None None Type 1~3 1~3
Specifying
This parameterthe time limitation
defines for of
the length
blocking a cellcoverage
the inter-freq when normal priority WRFD-
handover Admission Interval
is selected.
delay to trig. 020101 Control Type 1~3600 1~3600
ATM
If the inter-freq coverage handover Transmissio
priority
Timer_CU of the reported
timer. inter-freq
The parameter n
measure
affects thecells
AAL2aretransport
equal to efficiency
the WRFD- Introduction Interval 1~64,
highest priority,
and transport start inter-freq
delay. 050301 Package Type 1~64 step:0.05
handover.
If the inter-freq coverage handover
priority of the reported inter-freq
Indicates the times of sending PING Interval
measure cells are lower than the Inter
packets None None Type 1~1024 1~1024
highest priority of the measure cells, Frequency
start the inter-freq coverage Hard
handover delay timer. Handover
When the timer expiry, start inter- WRFD- Based on Interval
freq handover. 020302 Coverage Type 0~1000 0~1000
This parameter specifies the delay
time to start the retransmission ratio
monitoring after the RLC entity is WRFD- Flow Interval
established or reconfigured. 040100 Control Type 0~500000 0~500000
frequency
number
delay of handover.
time, handovers
whereas for The
and thelarger
slow-the
the
+ H/2 may
rates react differently tolower
the
value
number
moving of this
of
UE, the parameter,
wrong handovers,
callGSM the
drop rate thus is less
If the quality
trigger delay of
timethe for the event. For
probability
sensitive toof
preventing incorrect
unnecessary
the trigger decision,
handovers.
delay time. but
neighboring
the fast-moving cell meets
UE, the the
call drop
the
In slower the
addition,
Therefore, from
for response
the thecell of most
emulation
with the of
preceding
rate is more condition, the system
handover
perspective,
the fast-moving to sensitive
the
the UEs,change
UE
to of
atthis
the
different
trigger
parameter D0, D10, D20, 0, 10, 20, 40,
starts
delay the trigger
time, whereas timer. for The
the system
slow-
measured
rates
can bemay signals.
set react
smaller, differently to forthethe
then
moving implements
UE, thewhereas
handover Inter D40, D60, D80, 60, 80, 100,
Based
trigger
cell with on
delay thethe
most of
call
existing
time thefor
drop
the
rate is less
emulation
event.
slow-moving For Frequency D100, D120, 120, 160,
decision
sensitive after thetimeout ifdelay
the quality
result,
the
UEs, theto
fast-moving
this trigger
parameter
trigger
UE,delaythe
can time
call
be
time.
is
drop
set set to Hard D160, D200, 200, 240,
of
Timethe GSM
delayfor
Therefore, neighboring
forthetriggering
cell with cell always
handovers
most of
effectively
rate
larger.is more
The reduce
sensitive
value the
of this average
to the trigger
parameter Handover D240, D320, 320, 640,
meets
to
the GSM thecells
fast-moving preceding
with UEs, condition
non-verified
this parameterBSIC. D0, D10, D20, 0, 10, 20, 40,
number
delay
can betime,of handovers
adjusted whereas for
according and thetheslow-
to the WRFD- Based on Enumerati D640, D1280, 1280, 2560,
throughout
During
can be the
set the
period
smaller, time length
ofwhereas of
time specified the
for the Inter D40, D60, D80, 60, 80, 100,
number
moving
actual of wrong
UE,
network handovers,
thestatistics.
call drop thus
ratetrigger
is less 020302 Coverage on Type D2560, D5000 5000
timer.
by
cell this
with The most time
parameter, of length
the if the ofsignal
the
slow-moving Frequency D100, D120, 120, 160,
preventing
sensitive tounnecessary
thethe trigger handovers.
delay time.
timer
quality
UEs, isincalled
this a neighboring
parameter delaycan trigger
GSMbe set time.
cell Hard D160, D200, 200, 240,
In addition,
Therefore, from
for the thecell emulation
with most of
The
larger.delay
satisfies The trigger
inter-RAT
value time
of this and
handover parameter Handover D240, D320, 320, 640,
perspective,
the fast-moving the UEs,UE atthis different
parameter D0, D10, D20, 0, 10, 20, 40,
hysteresis
conditions
can are
and used the to prevent
neighboring mis-
ratesbe
can bemayadjusted
set react
smaller,
according
differently
whereas
to the
to the
for the
WRFD- Based on
Inter
Enumerati D640, D1280,
D40, D60, D80,
1280, 2560,
60, 80, 100,
decisions
GSM
actual cell
networkcaused
is by signal
notstatistics.
verified, jitters
an inter- 020302 Coverage on Type D2560, D5000 5000
trigger
cell delay
mosttime
withinter-RAT of the forslow-moving
the event. For Frequency D100, D120, 120, 160,
during
RAT handover is handover
triggered. When
the
UEs, fast-moving
this parameter UE, the can call drop
be set Hard D160, D200, 200, 240,
decisions.
the value of this parameter is
rate
larger.is more
The sensitive
value of this to parameter
the trigger Handover D240, D320, 320, 640,
Considering
65535, the RNC that doesthe UE notisperform
on the
delay
can time,
beof adjusted whereas for theto
according slow-the WRFD- Based on Enumerati D640, D1280, 1280, 2560,
edge
inter-RAT thehandovers
system, the parameter
to non-verified
moving
actual UE, thestatistics.
network call drop rate is less 020302 Coverage on Type D2560, D5000 5000
TimeToTrigForVerify
GSM cells. The highershould be set
the time-to-
sensitive to the trigger delay time.
to a comparatively
trigger parameters low are,value.
the smaller Inter-RAT
Therefore, for the cell with most of
Because
the average thenumberGSM cells of which the
of handovers Handover
the fast-moving UEs, this parameter
BSIC
is, and isthe
already
possibilityverified of usually
call
Thisbe
can parameter
set smaller, specifies
whereas thedrops
time
for the
WRFD- Based on
Inter
Interval 0~64000,
have good performance, the
increases. 020303 Coverage Type 0~64000,65535 65535
from the moment
cell with most of the slow-moving when the traffic Frequency
parameter TimeToTrigForVerify
volume
UEs, thisofparameter
the DCH exceeds can be set the Hard
should be set to 0, which indicates
upper
larger.threshold
The valuetoofthe thismoment
parameter Handover D0, D10, D20,
that the handover is implemented
when
can bethe traffic-related
adjusted according event to the4A on WRFD- Based on Interval D40, D60, D80,
immediately.
DCH
actual isnetwork
triggered. This parameter is
statistics. 020302 Coverage Type D100, D120,
0~64000 0, 10, 20, 40,
0~64000
This parameter
The higher specifies the time
the time-to-trigger
used to avoid unnecessary reports D160, D200, 60, 80, 100,
from the moment
parameters are, the when smallerthe traffic
the Inter-RAT
triggered by DCH traffic volume D240, D320, 120, 160,
volume
averageon the DCH
number falls belowis,
of handovers the Handover D0, D10, D20,
fluctuation. The larger the value of D640, D1280, 200, 240,
lower threshold to
and the possibility of call drops the moment when WRFD- Based on Interval D40, D60, D80,
this parameter, the longer the D2560, D5000, 320, 640,
the traffic-related event 4B is
increases. 020303 Coverage Type D100, D120,
0~64000 0, 10, 20, 40,
0~64000
required duration of the traffic Dynamic D10000, 1280, 2560,
triggered. This parameter is set to D160, D200, 60, 80, 100,
volume exceeding the upper Channel D15000, 5000, 10000,
avoid unnecessary reports triggered D240, D320, 120, 160,
threshold, and the smaller the Configuratio D20000, 15000,
by DCH traffic fluctuation. The larger D640, D1280, 200, 240,
possibility of triggering traffic-related WRFD- n Control Enumerati D25000, 20000,
the value of this parameter, the D2560, D5000, 320, 640,
event 4A on DCH. 021101 (DCCC) on Type D30000 25000, 30000
longer the required duration of the Dynamic D10000, 1280, 2560,
traffic volume keeping below the Channel D15000, 5000, 10000,
lower threshold, and the smaller the Configuratio D20000, 15000,
possibility of triggering traffic-related WRFD- n Control Enumerati D25000, 20000,
This parameter specifies the
event 4B on DCH. 021101 (DCCC) on Type D30000 25000, 30000
number of consecutive periods
during which the percentage of
retransmitted RLC PDUs is higher
than the threshold of event A before WRFD- Flow Interval
This parameter specifies the
event A is triggered. 040100 Control Type 1~100 1~100
number of consecutive periods
during which the percentage of
retransmitted RLC PDUs is lower
than the threshold of event B before WRFD- Flow Interval
event B is triggered. 040100 Control Type 1~100 1~100
When the operation time of the
OMU exceeds the value specified Security
by this parameter, some records are MRFD- Managemen Interval
deleted from the operation log. 210305 t Type 7~365 7~365
RAN
Bronze user TRMMAP index used WRFD- Sharing Interval
by the current adjacent node 021305 Phase 2 Type 0~163 0~163
RAN
Maximum
Gold user rate of the index
TRMMAP accumulated
used by WRFD- Sharing Interval
alarm blink adjacent
the current duration to
nodethe alarm 021305 Phase 2 Type 0~163 0~163
blink measurement period. Assume
this threshold is not 0. When the
RAN
rate of accumulated alarm blink
Minimum
Silver userrate of the accumulated
TRMMAP index used by WRFD- Sharing Interval
duration exceeds the threshold, an
alarm blink adjacent
the current duration to
nodethe alarm 021305 Phase 2 Type 0~163 0~163
alarm is reported. For querying the
blink measurement period. Assume
alarm blink measurement period,
this threshold is not 0. When the
see "LST ALMBLKSW". For setting Faulty
rate of accumulated alarm blink
the alarm blink measurement MRFD- Managemen Interval
duration is lower than the threshold,
period, see "SET ALMBLKSW". 210304 t Type 0~100 0~100
an alarm is reported. For querying
the alarm blink measurement
period, see "LST ALMBLKSW". For Faulty
setting the alarm blink measurement MRFD- Managemen Interval
This timer is a protection timer
period, see "SET ALMBLKSW". 210304 t Type 0~100 0~100
waiting for a signalling link test ATM
acknowledgement message (SLTA) Transmissio
from the peer end after a signalling n
link test message (SLTM) is sent to WRFD- Introduction Interval
the peer end. 050301 Package Type 8000~12000 8000~12000
PARAS,
TYPSRBTOAW
PARAS,
UECONNECTE
DMODETIMER
CONST,
ATM
UEIDLEMODETI
Transmissio
MERCONST,
This timer is used to send the n
USERGBRMAPI
signalling link test messages WRFD- ATM
Introduction Interval
NFO,
(SLTM) to the peer end regularly. 050301 Transmissio
Package Type 30000~90000 30000~90000
USERPRIORITY
n
Configuratio MAP,
Introduction
n UTRANREGIST
Package
name of the data table distributed MRFD- ATM
Managemen Enumerati ERINFO,
IP
on the board. 210301 tTransmissio on Type WPSALGO 0~276
Transmissio
n
WRFD- n
Introduction
050301 Introduction
Package
Bearer type used over the Iur WRFD- on Iur Enumerati ATM_TRANS(A
ATM_TRANS, ATM_TRANS,
IP
interface. 050410 Interface on Type TM circuit
IP_TRANS IP_TRANS
Transmissio
transmission),
WRFD- n
IP_TRANS(IP
050301 Introduction
transmission),
Bearer type used over the Iu WRFD- on Iu Enumerati ATM_TRANS, ATM_TRANS,
IP ATMANDIP_TR ATM_TRANS,
interface 050409 Interface on Type IP_TRANS IP_TRANS
Transmissio ANS(ATM and IP_TRANS,
n IP transmission), ATMANDIP_T
Introduction HYBRID_IP_TR RANS,
WRFD- on Iub Enumerati ANS(Hybrid IP HYBRID_IP_
Transport type of the Iub interface. 050402 Interface on Type transmission) TRANS
Configuratio
End point of the arrival window of
n
DL data frame. Normally, it is
Offset to DST, namely, the MRFD- Managemen Interval -120~-1,
forecasted that a DL data frame will
adjustment to time. 210301 t Type -120~-1,1~120 1~120
arrive before the time specified by
this parameter. The value of this Physical
A positive value relative to Latest
parameter is a positive value Channel
Time of Arrival (LToA). It indicates
relative to latest time of arrival WRFD- Managemen Interval
the endpoint of the arrival time
(LTOA). 022000 t Type 0~2559 0~2559
window for a downlink data frame.
Normally the downlink data frame Physical
arrives before that time.For detailed Channel
Start point of the arrival window of
information of this parameter, refer WRFD- Managemen Interval
DL data frame. Normally, it is
to 3GPP TS 25.402. 022000 t Type 0~2559 0~2559
forecasted that a DL data frame will
A positive value relative to Time of
arrive after the time specified by this Physical
arrival window endpoint (ToAWE). It
parameter. The value of this Channel
indicates the startpoint of the arrival
parameter
Type of theishost
a positive value WRFD- Managemen Interval
time window for alog to be
downlink collected.
data
relative
If to ToAWE.
this parameter is set to NORMAL, 022000 t Type 0~1279 0~1279
frame. Normally the downlink data
the
frametextarrives
log in after
the that time.For Physical
\common\fam\famlog
detailed information ofdirectory
this of Channel
the OMU installation
parameter, path TS
refer to 3GPP is WRFD- Managemen Interval
collected
25.402. and saved in the 022000 t Type 0~1279 0~1279
The cell is shut down automatically
\common\fam\famlog directory of
only when the total user number is Multi-Carrier
the OMU installation path.
no greater than the threshold. The Switch off
If this parameter is set to FORMAT,
total user number consists of the WRFD- Based on Interval
the binary log in the
DCH and CCH user numbers. 020117 Traffic Load Type 0~5 0~5
\common\fam\famlogfmt directory of
the OMU installation path is NORMAL(TXT
collected and saved in the FORMAT),
\common\fam\famlogfmt directory of Enumerati FORMAT(BIN NORMAL,
the OMU installation path. None None on Type FORMAT) FORMAT
HCS cell reselection penalty timer.
The larger the value of the
parameter, the longer the HCS HCS
penalty time. The smaller the value (Hierarchica D0, D10, D20,
of the parameter, the shorter the WRFD- l Cell Enumerati D30, D40, D50, 0, 10, 20, 30,
CPU usage threshold for debugging
HCS penalty time. 021200 Structure) on Type D60 40, 50, 60
tracing flow control. When the
average CPU usage of sliding
windows reaches or exceeds the
threshold, debugging tracing flow WRFD- Flow Interval
Packet queue usage threshold for
control is triggered. 040100 Control Type 30~100 30~100
debugging tracing flow control.
When the average packet queue
usage of sliding windows reaches or
exceeds the threshold, debugging WRFD- Flow Interval
CPU usage threshold for recovery
tracing flow control is triggered. 040100 Control Type 30~100 30~100
from debugging tracing flow control.
When the average CPU usage of
smooth windows is lower than the
Packet queue usage threshold for
threshold, debugging tracing flow WRFD- Flow Interval
recovery from debugging tracing
control is stopped. 040100 Control Type 30~100 30~100
flow control. When the average
packet queue usage of smooth
windows is lower than the threshold,
debugging tracing flow control is WRFD- Flow Interval
stopped. 040100 Control Type 30~100 30~100
Conversatio
WRFD- nal QoS
010501 Class CONVERSAT
Whether to control the debugging WRFD- Flow Enumerati
WRFD- Streaming IONAL,
tracing flow 040100 Control on Type ON, OFF ON, OFF
This parameter specifies the traffic 010502 QoS Class CONVERSATIO STREAMING,
class. Based on Quality of Service WRFD- Interactive NAL, INTERACTIV
This parameter specifies the traffic
(QoS), there are four traffic classes: 010503 QoS Class STREAMING, E,
class that the service belongs to.
conversational, streaming, WRFD- Background Enumerati INTERACTIVE, BACKGROU
The traffic class here only includes
interactive, and background. 010504 QoS Class on Type BACKGROUND ND
interactive and background, and the
SPI(Schedule Priority Indicator) of Traffic INTERACTIV
the other classes such as Priority E,
conversational or streaming are WRFD- Mapping on Enumerati INTERACTIVE, BACKGROU
INTERACTIV
configured by default values. 050424 Transport on Type BACKGROUND ND
This parameter specifies the traffic E,
class that the service belongs to. BE Traffic INTERACTIVE, BACKGROU
CONVERSAT
services are of three classes: Priority BACKGROUND, ND,
CONVERSATIO IONAL,
interactive, background and IMS WRFD- Mapping on Enumerati IMSSIGNALLIN IMSSIGNALLI
NAL, STREAMING,
signalling. 050424 Transport on Type G NG
STREAMING, INTERACTIV
INTERACTIVE, E,
BACKGROUND, BACKGROU
CONVERSAT
This parameter specifies the traffic WRFD- CPC - DTX / Enumerati NBAMR, ND, NBAMR,
This parameter specifies the traffic IONAL,
type. 010686 DRX on Type WBAMR WBAMR
class. According to the QoS CONVERSATIO STREAMING,
requirements of services, there are NAL, INTERACTIV
CONVERSAT
four traffic classes: conversational, STREAMING, E,
CONVERSATIO IONAL,
streaming, interactive, and WRFD- Enhanced Enumerati INTERACTIVE, BACKGROU
NAL, STREAMING,
background. 010688 CELL-FACH on Type BACKGROUND ND
STREAMING, INTERACTIV
INTERACTIVE, E,
CPC - HS- BACKGROUND, BACKGROU
This parameter specifies the traffic WRFD- SCCH less Enumerati NBAMR, ND, NBAMR,
class. 010687 operation on Type WBAMR WBAMR
Transfer Common Channel User
number
Value range: 0~10
Content: When the system is
overloaded and congested, users
Traffic mode of the M3UA link set.
on the DCH can be reconfigured to INTERACTIV
At present, only the active/standby
the CCH in order to reduce the cell HSDPA E,
and load sharing mode is available. Service
load
This and recoverspecifies
the system.
If theparameter
M3UA links in the link theset
traffic
work WRFD- Flow
Steering
Enumerati INTERACTIVE, BACKGROU
The
class.mechanism of the OLC is that 01061010 Control on Type BACKGROUND ND
in overriding mode, only one link in and Load
an action is performed in each [OLC
the link set works in the active Sharing in
period] and some services are
mode,
This and all other
parameter links work in the
selected based specifies the traffic
on the action rules RRC
Service
AMR, VP, AMR, VP,
standby
type for mode.
the RRCIn redirection
this case, only the WRFD- Connection Enumerati PSR99, PSR99,
to perform this action. This Steering
active link carries traffic, and the
algorithm. 020120 Setup on Type PSHSPA PSHSPA
parameter defines the maximum and Load
standby links do not carry any
number of users selected in Sharing in
traffic. When the active link is faulty,
executing
This parameterreconfiguration to the
specifies the traffic RRC AMR, VP, AMR, VP,
the standby link with the highest
CCH.
type for the RRC redirection WRFD- Connection Enumerati PSR99, PSR99,
priority is automatically activated to IP M3UA_OVERRI
If the parameter value is too high,
algorithm. 020120 Setup on Type PSHSPA PSHSPA
take over as the active link. Transmissio DE_MOD(Active
the OLC action may fluctuate greatly
If the M3UA links in the link set work n /Standby Mode), M3UA_OVER
and over control may occur (the
in load-sharing mode, all the M3UA Introduction M3UA_LOADSH RIDE_MOD,
state of overload and congestion
links in the link set work in active WRFD- on Iu Enumerati ARE_MOD(Load M3UA_LOAD
turns into another extreme--under
mode and carry traffic. 050409 Interface on Type Sharing Mode) SHARE_MOD
load). If the parameter value is too
low, the OLC action has a slow
response and the effect is not
apparent, affecting the OLC WRFD-
Overload Interval
performance. 020107
Control Type 0~10 0~10
This parameter specifies the round- ATM
trip transport delay of Iub interface Transmissio
when the transmission mode is ATM n
transmission or of IP dedicated WRFD- Introduction Interval
Dynamic ATM(ATM),
network. 050301 Package Type 0~65535 0~65535
AAL2 IP(IP),
Connections ATM_IP(ATM
in and IP), ATM, IP,
WRFD- Iub/IuCS/Iur Enumerati HYBRID_IP(HY ATM_IP,
IP
Transport type 05030104 Interface on Type BRID IP) HYBRID_IP
Transmissio
n
Introduction IP(IP),
Transport type of the adjacent node WRFD- on Iub Enumerati HYBRID_IP(HY IP,
ATM(ATM),
to which the path belongs 050402 Interface on Type BRID IP) HYBRID_IP
IP(IP),
ATM QoS
ATM_IP(ATM
Introduction
RAN and IP), ATM, IP,
on Hub
Transport type of the adjacent node WRFD- Sharing Enumerati HYBRID_IP(HY ATM_IP,
NodeB ATM(ATM),
and interface type 021305 Phase 2 on Type BRID IP) HYBRID_IP
(Overbookin IP(IP),
ATM QoS
g on Hub ATM_IP(ATM
Introduction
Node B and IP), ATM, IP,
on Hub
WRFD- Transmissio Enumerati HYBRID_IP(HY ATM_IP,
NodeB
Transport type 050406 n) on Type BRID IP) HYBRID_IP
(Overbookin
g on Hub
Node B
WRFD- Transmissio Enumerati ATM(ATM),
Transport type 050406 n) on Type IP(IP) ATM, IP
3GPP
WRFD- Specificatio Interval
Uniquely identifying a BCH in a cell. 010101 ns Type 0~255 0~255
If the signal quality (CPICH Ec/No
measured by the UE) of a
neighboring cell is better than that of
the serving cell during the specified
time of this parameter, the UE
reselects the neighboring cell. It is
Uniquely
used to avoididentifying a FACH
ping-pong in a
reselection 3GPP
cell. Configured according
between different cells. Note that to the WRFD- Specificatio Interval
product
the valuespecifications.
0 corresponds to the 010101 ns Type 1~32 1~32
default value defined in the protocol.
Set the parameter as follows: 3GPP
1. Ensure that the UE can reselect a WRFD- Specificatio Interval
cell whenidentifying
Uniquely crossing the non-soft-
a PCH in a cell. 010101 ns Type 1~32 1~32
switch area of the cell and that the
Related length for 1D records in the
UE timely performs location
best cells. 3GPP
updates, cell updates, or URA
In the speed
Uniquely estimation
identifying algorithm,
an RACH in a WRFD- Specificatio Interval
updates when necessary. HSDPA TRCH_HSDSC TRCH_HSDS
an
cell.algorithm is adopted to avoid 010101 ns Type 1~32 1~32
2. Ensure that the UE does not Introduction H, CH,
inaccurate estimation caused by
reselect a cell when it is in the soft- WRFD- Package TRCH_EDCH_2 TRCH_EDCH
frequent handovers of best cells.
switch area of the cell. In this way, 010610 HSUPA MS, _2MS,
That is, during the latest
the
This unnecessary location the
parameter specifies updates,of
[TRELATELENGTH], if more type
than WRFD- Introduction Enumerati TRCH_EDCH_1 TRCH_EDCH
cell updates,
transport and URA updates are
channel. 010612 Package on Type 0MS _10MS
one event 1D of a certain cell TRCH_DCH, TRCH_DCH,
avoided. Conversatio
occurs, the event 1D record is TRCH_EDCH_2 TRCH_EDCH
3.
ThisConsider
parameter the specifies
differencethe between
local WRFD- nal QoS
restored
This to the state
parameter whenthe
specifies thetype1st of Outer Loop MS, _2MS,
cells that cover different areas,
transport channel type for the typical for 010501 Class TRCH_DCH, TRCH_DCH,
event
uplink 1D occurschannel
transport during thefor latest
the WRFD- Power Enumerati TRCH_EDCH_1 TRCH_EDCH
example
traffic. Whenthe cells covering
this typical traffic is WRFD- Streaming TRCH_HSDSC TRCH_HSDS
[TRELATELENGTH].
typical RAB. cells coveringThe given 020503 Control on Type 0MS _10MS
highways
applied onand UL, it refers to thedensely
UL 010502 QoS Class H, CH,
time length is set by this parameter.
populated areas. TIf
transport channel theWhen
type. parameter
this WRFD- Interactive TRCH_EDCH_2 TRCH_EDCH
If the value is set too large, the RNC
is set totraffic
typical a comparatively
is applied onlow DL, value,
it 010503 QoS Class MS, _2MS,
judges a non-frequently changing
the
refersping-pong
to the DLreselections may be
transport channel WRFD- Background Enumerati TRCH_EDCH_1 TRCH_EDCH
best cell change as a frequently
caused.
type. The parameter can be 010504 QoS Class on Type 0MS _10MS
changing one by mistake. If the
increased in populated area and
value is set too small, the speed HCS
reduced in high-speed movement. If
estimation algorithm may be invalid. (Hierarchica
the parameter is set to a
It is recommended that this value be WRFD- l Cell Interval
comparatively high value, the cell
set according to the cell radius. 021200 Structure) Type 0~120 0~120
reselection delay may become
excessively high, and thus cell
This parameter indicates the UE
reselections may be affected.
reselection delay in the
For detailed information, refer to WRFD- Intra RNC Interval
CELL_FACH connection mode. This
3GPP TS 25.304. 010801 Cell Update Type 0~31 0~31
parameter is not configured when
the value is 255. Instead, the
This parameter indicates the UE
Treselections parameter is used. {0~6.2},
reselection delay in the CELL_PCH
For detailed information, refer to WRFD- Intra RNC Interval {255},
or URA_PCH connection mode.
3GPP TS 25.304. 010801 Cell Update Type 0~31,255 step:0.2
This parameter is not configured
when the value is 255. Instead, the
Treselections parameter is used.
For detailed information, refer to WRFD- Intra RNC Interval
3GPP TS 25.304. 010801 Cell Update Type 0~31,255 {0~31}, {255}
Interval
TRM load threshold index None None Type 0~199 0~199
8),
TS9(Time_slot_
9),
TS10(Time_slot
_10),
TS11(Time_slot
_11),
TS12(Time_slot
_12),
Interval TS13(Time_slot
TRM load threshold index None None Type _13),
0~199 0~199
TS14(Time_slot
_14),
TS15(Time_slot
Interval _15),
TRM load threshold index None None Type 0~199
TS16(Time_slot 0~199
_16),
TS17(Time_slot
Interval _17),
TRM load threshold index None None Type TS18(Time_slot
0~199 0~199
_18),
TS19(Time_slot
_19),
Interval TS20(Time_slot
Intra RNC
TRM load threshold index None None Type 0~199
_20), 0~199
Softer
WRFD- Handover TS21(Time_slot
020202 Inter RNC _21),
WRFD- Soft Interval TS22(Time_slot
Uniquely identifying an RNC. 020203 Handover Type _22),
0~4095 0~4095
TS23(Time_slot
_23),
TS24(Time_slot TS1, TS2,
Trunk group number of the logical Interval _24), TS3, TS4,
port None None Type 0~11
TS25(Time_slot 0~11
TS5, TS6,
_25), TS7, TS8,
IP Re-route TS26(Time_slot TS9, TS10,
WRFD- Based on Interval _26), TS11, TS12,
TRUNK group number 050421 BFD/ARP Type TS27(Time_slot
0~11 TS13,
0~11 TS14,
_27), TS15, TS16,
TS28(Time_slot TS17, TS18,
_28), TS1,
TS19,TS2,
TS20,
WRFD- Ethernet Interval TS3,
TS29(Time_slot TS21,TS4,
TS22,
TRUNK group number 050425 OAM Type 0~11
TS1, 0~11
_29), TS2, TS3, TS5,
TS23,TS6,
TS24,
TS4, TS5, TS6,
TS30(Time_slot TS7,
TS25,TS8,
TS26,
TS7,
_30), TS8, TS9, TS9,
TS27,TS10,
TS28,
TS1, TS2,
Enumerati TS10, TS11,
TS31(Time_slot TS11,
TS29, TS12,
TS30,
TS3, TS4,
Timeslot number None None on Type TS12,
_31) TS13, TS13,
TS31 TS14,
TS1, TS2, TS3, TS5, TS6,
TS14, TS15, TS15, TS16,
TS4, TS5, TS6, TS7, TS8,
TS16, TS17, TS17, TS18,
ATM over TS7, TS8, TS9, TS9, TS10,
TS18, TS19, TS19, TS20,
WRFD- E1T1 on Iub Enumerati TS10, TS11,
OFF(OFF), TS11, TS12,
TS20, TS21, TS21, TS22,
Whether to use timeslot 16 05030101 Interface on Type TS12,
ON(ON) TS13, TS13, TS14,
OFF, ON
TS22, TS23, TS23, TS24,
TS14, TS15, TS15, TS16,
Fractional TS24, TS25, TS25, TS26,
TS16, TS17, TS17, TS18,
ATM TS26, TS27, TS27, TS28,
TS18, TS19, TS19, TS20,
WRFD- Function on Bit Field TS28, TS29, TS29, TS30,
TS20, TS21, TS21, TS22,
Bearer timeslot 050302 Iub Interface Type TS30, TS31 TS31
TS22, TS23, TS23, TS24,
TS24, TS25, TS25, TS26,
TS26, TS27, TS27, TS28,
Bearer E1/T1 port timeslot of PPP Bit Field TS28, TS29, TS29, TS30,
link. None None Type TS30, TS31 TS31
TS10, TS11, TS11, TS12,
TS12, TS13, TS13, TS14,
TS14, TS15, TS15, TS16,
TS16, TS17, TS17, TS18,
TS18, TS19, TS19, TS20,
TS20, TS21, TS21, TS22,
TS22, TS23, TS23, TS24,
TS24, TS25, TS25, TS26,
TS26, TS27, TS27, TS28,
Bearer E1/T1 port timeslot of MP Bit Field TS28, TS29, TS29, TS30,
link. None None Type TS30, TS31 TS31
Interval
Timeslot cross index None None Type 0~65535 0~65535
15-bit
MGWTST user IMSI in a number String numerical (0
segment. None None Type None to 9) string
Interval
Detection duration (s) None None Type 1~120 1~120
3GPP
A timer used to wait UE capability WRFD- Specificatio Interval
enquiry response . 010101 ns Type 1~10000 1~10000
Administrators(A
A timer to RNC wait for the
dministrator),
response to counter check in WRFD- Interval
Operators(Oper
security mode procedure. 011402 Encryption Type 1~10000 1~10000
ator), Administrator
Users(User), s, Operators,
Group to which the operator Security Guests(Guest), Users,
belongs. This parameter is used to MRFD- Managemen Enumerati Customs(Custo Guests,
limit the right of the operator. 210305 t on Type m) Customs
Duration when the measured value
UL activity factor of the R99 AMR
of AMR keeps fulfilling the 6A1
conversational service. Signals Interval
measurement condition before the
might
Unit be discontinuously transmitted
eventtime
6A1for is the error code
triggered. Event ratio test None None Type 300~1000 300~1000
because of the activation detection
triggering is used for UL
Duration when theservice
of conversational measured and value
measurement. The event 6A1 is Faulty
of AMRchanges
source keeps fulfilling
of datathe 6A2 The
service.
triggered when the measured value MRFD- Managemen String 0~9
measurement
activity factor iscondition
defined as before the
the ratio
is greater
Upper limitthan the absolute upper
event 6A2
of signal isfortriggered.
triggering
transmission
an alarm
Event
time to
210304 t Type None Characters
threshold 6A1. When the event 6A1
triggering
channel is used fortime.
occupation UL The
Duration
is triggered,when thetheAMR measured
speech value rate
measurement.
activity factors The
of the event
same6A2 is
transport
of AMRbe
should keeps
lowered. fulfilling
Thethe 6B1
measured D0, D10, D20, 0, 10, 20, 40,
triggered
channel whenbe
might thedifferent
measured in value
UL and WRFD- Admission Interval 0~1, step:
measurement
value is reported condition
after it before
fulfills the the D40, D60, D80, 60, 80, 100,
is
DL.greater than the absolute upper 020101 Control Type 0~100 0.01
event 6B1 for
conditions is triggered.
reporting Event and for the AMR/WB- D100, D120, 120, 160,
threshold 6A2. When the event 6A2
triggering
trigger time is specified
used for UL by this AMR D160, D200, 200, 240,
Duration
is triggered,when thetheAMR measured
speech value rate
measurement.
parameter. The The event
trigger time 6B1 is
is used Speech D240, D320, 320, 640,
of AMRbe
should keeps
lowered. fulfilling
Thethe 6B2
measured D0, D10, D20, 0, 10, 20, 40,
triggered
to prevent when
the the measured
sudden change value
of the WRFD- Rates Enumerati D640, D1280, 1280, 2560,
measurement
value is reported condition
after it before
fulfills the the D40, D60, D80, 60, 80, 100,
is lower than
measured value the forabsolute
being lower
reported. 020701 Control on Type D2560, D5000 5000
event 6B2 is triggered.
conditions for reporting and for the Event AMR/WB- D100, D120, 120, 160,
threshold 6B1. When the event 6B1
triggering
trigger time is specified
used for UL by this value AMR D160, D200, 200, 240,
Duration
is triggered,when thetheAMR measured
speech rate
measurement.
parameter. The The event
trigger time 6B2 is
is used Speech D240, D320, 320, 640,
of AMRbe
should keeps
raised. fulfilling the
The measured 6D D0, D10, D20, 0, 10, 20, 40,
triggered
to prevent when
the the measured
sudden change value
of the WRFD- Rates Enumerati D640, D1280, 1280, 2560,
measurement
value is reported condition
after it before
fulfills the the D40, D60, D80, 60, 80, 100,
is lower than
measured value the forabsolute
being lower
reported. 020701 Control on Type D2560, D5000 5000
event 6D isfor
conditions triggered.
reportingEvent and for the AMR/WB- D100, D120, 120, 160,
threshold 6B2. When the event 6B2
triggering
trigger time is specified
used for UL by this AMR D160, D200, 200, 240,
is triggered, the AMR speech rate
measurement.
parameter. TheThe event
trigger time 6Disisused Speech D240, D320, 320, 640,
should be raised. The measured D0, D10, D20, 0, 10, 20, 40,
triggered
to prevent the sudden change value
when the measured of the WRFD- Rates Enumerati D640, D1280, 1280, 2560,
value is reported after it fulfills the D40, D60, D80, 60, 80, 100,
is greater than
measured valuethe forabsolute
being reported.upper 020701 Control on Type D2560, D5000 5000
conditions for reporting and for the AMR/WB- D100, D120, 120, 160,
threshold 6D. When the event 6D is
trigger time specified by this AMR D160, D200, 200, 240,
triggered, the AMR speech rate
UL activity factor
parameter. of the time
The trigger R99 is used Speech D240, D320, 320, 640,
should be lowered. The measured D0, D10, D20, 0, 10, 20, 40,
background
to prevent the service.
suddenSignalschangemight of the WRFD- Rates Enumerati D640, D1280, 1280, 2560,
value is reported after it fulfills the D40, D60, D80, 60, 80, 100,
be discontinuously
measured value fortransmitted
being reported. 020701 Control on Type D2560, D5000 5000
conditions for reporting and for the AMR/WB- D100, D120, 120, 160,
because of the activation detection
trigger
This time specified
parameter specifiesby this rate AMR D160, D200, 200, 240,
of conversational service the and
parameter.
threshold The
for the of trigger
decision time to is setused
up a Speech D240, D320, 320, 640,
source changes data service. The
to
PS prevent
domain the sudden change of the
background/interactive WRFD- Rates Enumerati D640, D1280, 1280, 2560,
activity factor is defined as the ratio
measured
service value for beingthe reported. 020701 Control on Type D2560, D5000 5000
of signalon the DCH
transmission in time uplink.
to
L3 filtering coefficient. The larger the
Only
channelwhen the UL service
occupation time. rate is
The
This parameter specifies
value of this parameter, the stronger the rate
higher
activity than
factors or equal the to
of decision this transport
same
threshold
the smoothing for the effect and the to set up a
higher
threshold,
channel or the
might beDL serviceinrate
different UL andis WRFD- Admission Interval 0~1, step:
PS
the domain background/interactive
anti-slow-fading capability, but D0, D1, D2,
higher
DL. than or equal to the downlink 020101 Control Type 0~100 0.01
service
the lower onthethesignal
DCH change
in the uplink. tracing D0, D1, D2, D3, D3, D4, D5,
threshold, the service will be set up
Only whenFor
capability. the detailed
UL service rate is
information D4, D5, D6, D7, D6, D7, D8,
on DCH. Otherwise, the service is UE State in
higher than or equal
of this parameter, to this
refer to 3GPP TS Load D8, D9, D11, D9, D11,
set up on CCH. According to the Connected
threshold,
25.433. or the DL service rate is WRFD- Measureme Enumerati D13, D15, D17, D13, D15,
product specifications, only the Mode
higher than or equal
Recommended value: toD6the downlink 020102 nt on Type D19 D17, D19
background/interactive services (CELL-
threshold, the service will be set up
whose rate is lower than 16 kbit/s DCH, CELL-
on DCH. Otherwise, the service is UE State in
can be carried on the CCH. PCH, URA-
set up on CCH. According to the Connected
Therefore, this parameter can only WRFD- PCH, CELL- Enumerati
product specifications, only the Mode
be set to 16 kbit/s or 8 kbit/s. 010202 FACH) on Type D8, D16 8, 16
background/interactive services (CELL-
whose rate is lower than 16 kbit/s DCH, CELL-
can be carried on the CCH. PCH, URA-
Therefore, this parameter can only WRFD- PCH, CELL- Enumerati
be set to 16 kbit/s or 8 kbit/s. 010202 FACH) on Type D8, D16 8, 16
larger this parameter to be set, the
sooner max bit rate to be reached,
but the bit rate is more likely to be
declined when system congested,
so it makes no sense to set this
parameter too high. Contrarily,the
smaller the parameter to be set, the Dynamic
This parameter specifies the rate
more easily the BE traffic to be Channel D8, D16, D32,
threshold for decision to use E-DCH
accessed at required bit rate. But Configuratio D64, D128, 8, 16, 32, 64,
to carry UL PS domain
over small setting will take longer to WRFD- n Control Enumerati D144, D256, 128, 144,
background/interactive services. D8, D16, D32, 8, 16, 32, 64,
adjust to needed bit rate. 021101 (DCCC) on Type D384 256, 384
When the maximum UL service rate Interactive D64, D128, 128, 144,
is higher than or equal to this and D144, D256, 256, 384,
threshold, the service will be carried Background D384, D608, 608, 1440,
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
on E-DCH. Otherwise, it will be WRFD- Traffic Class Enumerati D1440, D2048, 2048, 2880,
of BE keeps fulfilling the 6A1 D40, D60, D80, 60, 80, 100,
carried on DCH. 01061206 on HSUPA on Type D2880, D5740 5740
measurement condition before the Dynamic D100, D120, 120, 160,
event 6A1 is triggered. The trigger Channel D160, D200, 200, 240,
time is used to prevent the sudden Configuratio D240, D320, 320, 640,
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
change of the measured value for WRFD- n Control Enumerati D640, D1280, 1280, 2560,
of BE keeps fulfilling the 6A2 D40, D60, D80, 60, 80, 100,
being reported. 021101 (DCCC) on Type D2560, D5000 5000
measurement condition before the Dynamic D100, D120, 120, 160,
event 6A2 is triggered. The trigger Channel D160, D200, 200, 240,
time is used to prevent the sudden Configuratio D240, D320, 320, 640,
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
change of the measured value for WRFD- n Control Enumerati D640, D1280, 1280, 2560,
of BE keeps fulfilling the 6B1 D40, D60, D80, 60, 80, 100,
being reported. 021101 (DCCC) on Type D2560, D5000 5000
measurement condition before the Dynamic D100, D120, 120, 160,
event 6B1 is triggered. The trigger Channel D160, D200, 200, 240,
time is used to prevent the sudden Configuratio D240, D320, 320, 640,
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
change of the measured value for WRFD- n Control Enumerati D640, D1280, 1280, 2560,
of BE keeps fulfilling the 6B2 D40, D60, D80, 60, 80, 100,
being reported. 021101 (DCCC) on Type D2560, D5000 5000
measurement
The admissioncondition before the
control decision is Dynamic D100, D120, 120, 160,
event
only for dedicated channels.trigger
6B2 is triggered. The For Channel D160, D200, 200, 240,
time
common is used to prevent
channels, some theresources
sudden Configuratio D240, D320, 320, 640,
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
change
instead of the measured
of a special value for WRFD- n Control Enumerati D640, D1280, 1280, 2560,
of BE keeps fulfillingadmission
the 6D D40, D60, D80, 60, 80, 100,
being
procedurereported.
are reserved. 021101 (DCCC) on Type D2560, D5000 5000
measurement condition before the Dynamic D100, D120, 120, 160,
In the 6D
event UL,isaccording
triggered.toThe the trigger
current Channel D160, D200, 200, 240,
load
time isfactor
usedand the characteristics
to prevent the suddenof Configuratio D240, D320, 320, 640,
the
changenew of
call,
thethe UL CACvalue
measured algorithm
for WRFD- n Control Enumerati D640, D1280, 1280, 2560,
predicts the new traffic channels
being reported. 021101 (DCCC) on Type D2560, D5000 5000
load factor with the assumption of
admitting the new call, then plus
Load
with the premeditated common
Length of smoothing filter window of WRFD- Measureme Interval
channel UL load factor to get the
uplink CAC. 020102 nt Type 1~32 1~32
predicted UL load factor. Then,
compare it with the UL admission
threshold. If the value is not higher
This
than parameter
the threshold, specifies the
the call is WRFD- Admission Interval 0~1,
compression methodrejected.
admitted; otherwise, that the 020101 Inter
Control Type 0~100 step:0.01
NodeB supports in the uplink. Frequency
Admission threshold of total cell
- SF/2: SF reduction by two Hard
uplink power. This parameter is
- HIGHER_LAYER_SCHDL: higher Handover
related to the target load of the WRFD- Admission Interval 0~1,
layer scheduling Based on
Number of users selected in a UL
uplink schedule. 020101 Control Type 0~100 step:0.01
If both SF/2 and Coverage
LDR CS domain inter-RAT
HIGHER_LAYER_SCHDL are WRFD- Inter-RAT
SHOULDBE load handover. The
selected, the NodeB supports both 020302 Handover SF/2, SF/2,
target subscribers of this parameter
of the compression methods in the WRFD- Based on Bit Field HIGHER_LAYE HIGHER_LA
are the CS domain subscribers.
uplink. 020303 Coverage Type R_SCHDL YER_SCHDL
Because the CS domain subscribers
are session subscribers in general
and they have little impact on load,
you can set this parameter to a WRFD- Load Interval
comparatively high value. 020106 Reshuffling Type 1~10 1~10
Number of users selected in a UL
LDR CS domain inter-RAT
SHOULDBE load handover. The
target subscribers of this parameter
Number of users selected in a UL
are the CS domain subscribers.
LDR CS domain inter-RAT
Because the CS domain subscribers
SHOULDNOTBE load handover.
are session subscribers in general
The target subscribers of this
and they have little impact on load,
parameter are the CS domain
Number
you can set of users selected intoaaUL
this parameter WRFD- Load Interval
subscribers. Because the CS
LDR CS domain
comparatively inter-RAT
high value. 020106 Reshuffling Type 1~10 1~10
domain subscribers are session
SHOULDNOTBE load handover.
subscribers in general and they
The target subscribers of this
have little impact on load, you can
parameter are the CS domain
set this parameter to a WRFD- Load Interval
subscribers. Because the CS
comparatively high value. 020106 Reshuffling Type 1~10 1~10
domain subscribers are session
subscribers in general and they
For a BE service that has a low
have little impact on load, you can
maximum rate, the DCCC algorithm
set this parameter to a WRFD- Load Interval
is not obviously effective yet it
comparatively high value. 020106 Reshuffling Type 1~10 1~10
increases algorithm processing. Dynamic
Conversatio
Thus, the traffic-based DCCC Channel D8, D16, D32,
WRFD- nal QoS
algorithm is applied to BE services Configuratio D64, D128, 8, 16, 32, 64,
010501 Class
whose maximum UL rate is greater WRFD- n Control Enumerati D144, D256, 128, 144,
WRFD- Streaming
Maximum UL rate when coverage of
than the threshold. 021101 (DCCC) on Type D384 256, 384
This parameter specifies the UL FP 010502 QoS Class
the entire cell is ensured under
mode of this type of RAB. For WRFD- Interactive
certain load. For a BE service that
details of normal mode and silent 010503 QoS Class
has a low maximum rate, the DCCC
mode, refer to section 5.1.1 of the WRFD- Background Enumerati NORMAL, NORMAL,
algorithm is not obviously effective
3GPP TS 25.427. 010504 QoS Class on Type SILENT SILENT
yet it increases algorithm Dynamic
processing. Thus, the coverage- Channel D8, D16, D32,
This parameter specifies the uplink
based DCCC algorithm is applied to Configuratio D64, D128, 8, 16, 32, 64,
guaranteed bit rate (GBR) of the BE
BE services whose maximum UL WRFD- n Control Enumerati D144, D256, 128, 144,
service. GBR is the minimum bit
rate is greater than the threshold. 021101 (DCCC) on Type D384 256, 384
rate that the system can guarantee
for the service after it accesses in. Traffic D0, D8, D16,
SF4(SF4),
The GBR of none BE service is Priority D32, D64, D128, 0, 8, 16, 32,
SF8(SF8),
specified by the RAB assignment WRFD- Mapping on Enumerati D144, D256, 64, 128, 144,
SF16(SF16),
If the the
from HS-DPCCH
CN. carries 050424 Transport on Type D384 256, 384
SF32(SF32), SF4, SF8,
ACK/NACK, the system will not
Uplink Credit Reserved by Spread SF64(SF64), SF16, SF32,
perform CAC. If the HS-DPCCH
Factor for HandOver. SFOFF SF128(SF128), SF64, SF128,
carries CQI, the system will perform
means that none of them are WRFD- Admission Enumerati SF256(SF256), SF256,
CAC. This parameter refers to the
reserved for handover. 020101 Control on Type SFOFF(SFOFF) SFOFF
resources reserved for the uplink
HS-DPCCH carrying ACK/NACK.
The corresponding threshold is the
UL activity
uplink limit factor
capacityof the R99 by
multiplied WRFD- Admission Interval 0~1,
interactive
this parameter.service. Signals might be 020101 Control Type 0~100 step:0.01
This parameter specifies the E-DCH
discontinuously transmitted because
data transfer mode of IMS signalling
of the activation detection of
services. It is valid only when IMS IMS SCHEDULED, SCHEDULED
conversational service and source
signalling services are mapped onto WRFD- Signaling Enumerati NON- , NON-
changes of data service. The activity
the E-DCH. 010618 over HSPA on Type SCHEDULED SCHEDULED
factor is defined as the ratio of
signal transmission time to channel
occupation time. The activity factors
of the same transport channel might WRFD- Admission Interval 0~1, step:
be different in UL and DL. 020101 Control Type 0~100 0.01
The UE can be selected to process
load handover only when its
bandwidth is less than this WRFD- Load Interval
threshold. 020106 Reshuffling Type 0~400000 0~400000
frequency
remaining load handover
space is larger is than this
(CS DOMAIN
selected basedINTER-RAT
on the action SHOULD rules
performed.
threshold. The lower the parameter
NOT BE LOAD
to perform this Channels HANDOVER),
action. This
BERATERED:
is, the easier it is to find aare qualified
PSINTERRATSHOULDNOTLDHO
parameter defines the
reconfigured
target cell for the for theblindBEmaximum
service.
handover.
(PS DOMAIN
number of RABsThe INTER-RAT
selected SHOULD
in
QOSRENEGO:
Excessively small valuerenegotiation
of the
NOT BE
executing LOAD
uplink HANDOVER)}
on the QoS
parameter, of theLDR-AMR
however uncontrollable voice
Physical
service unit:
rate none makes
reduction. If the
the
real-time service
target cellNOACT: easily enter is performed.
the
Content:
parameter value is too high, the No load
CSINTERRATSHOULDBELDHO:
congestion action status.isThe higher the
reshuffling
LDRinter-RAT
action may taken.
fluctuate greatly NoAct(no
The
parameter is, SHOULDBE
the more difficult loadit is
BERATERED:
Number of RABs Channels
selected arein(the action),
and over control
handover
for the of the
inter-frequency
maydomain
CS occur isa UL
reconfigured
LDR
state BE
of traffic
basic forrate
congestion BEblind
thereduction. service
turns tothe
Ininto WRFD- Load Interval InterFreqLDHO(i 0~1,
performed.
handover
reduce
actual rate.occurs. 020106 Reshuffling Type 0~100 load
nter-freq step:0.01
anothersystem, this parameter
extreme--under
PSINTERRATSHOULDBELDHO: load). can If the
QOSRENEGO:
be set on the basisTheofrenegotiation handover),
parameter
The inter-RAT value is toothe
SHOULDBE low,actual the
loadLDR NoAct(no
on the QoS of the
circumstances. IfPS uncontrollable
the high-rate BERateRed(BE
action
handover
Number hasof ofaRABs
slow
the response
domain
selected inand
isa UL the action),
real-time
subscribers
effect is service
not occupy
apparent, is performed
a high
affecting tothe WRFD- Load Interval traff rate
performed.
LDR BEservice traffic rate reduction. In the InterFreqLDHO(i
reduce
proportion, set theQoS. parameter reduction),
LDR performance.
AMRRATERED
actual system, this (AMR serviceto
parameter
a
rate
can 020106 Reshuffling Type 1~10
nter-freq load 1~10
CSINTERRATSHOULDBELDHO:
comparatively low value. If the high- QoSRenego(unc
decreasing):
be set on theThe basis setting
of theofactual the TFC handover),
The inter-RAT
rate subscribers SHOULDBE
occupy a low load ontrolled real-
subset and the negotiation
circumstances. If the high-rate of the Load BERateRed(BE
handover
proportion, of the
set CS domain isto a time traff Qos re-
service
subscribers
Length of rate canthe
occupy
smoothing beparameter
performed
afilter
high window for of WRFD- Measureme Interval traff rate
performed.
comparatively For details,
high value. referBecauseto negotiation),
the AMR
proportion,
uplink LDR. voice service.
set the parameter to a 020102 nt Type reduction),
1~32 1~32
3GPP
the basicTS congestion
25.331. control uplink CSInterRatShoul
CSINTERRATSHOULDNOTLDHO:
Threshold
comparatively of SF low reserved
value. Ifinthe high- QoSRenego(unc
PSINTERRATSHOULDBELDHO:
algorithm is designed tocredit
slowly dBeLDHO(CS
The
credit
rate inter-RAT
LDR.
subscribers The SHOULDBE
uplink
occupy a low load
LDR is NoAct(no
ontrolled real-
The inter-RAT
decrease cell SHOULDBE
load, you needload domain inter-rat
handover
triggered
proportion, ofset
when the the
the CSparameter
SFdomain
factor istoto
set
a action),
time traff Qos re-
handover
this parameter of thetoPS domain is
a comparatively WRFD- Load Interval NoAct(no
should be load
performed.
corresponding
comparatively high to the uplinkBecause
value. reserved InterFreqLDHO(i
negotiation),
performed.
low value. 020106 Reshuffling Type action),
handover),
1~10 1~10
PSINTERRATSHOULDNOTLDHO:
credit
the basic is higher
congestion than the uplink or
control nter-freq load
CSInterRatShoul
PSINTERRATSHOULDNOTBELDH BERateRed(BE
PSInterRatShoul
The inter-RAT
downlink
algorithm credit SHOULDNOTBE
is designedSFSHOULDNOTBE
reserved
to slowly handover),
dBeLDHO(CS
O: The inter-RAT traff rate
dBeLDHO(PS
load handover
threshold. The of the PSneed domain is BERateRed(BE
domain inter-rat
decrease
load
Reservedhandover cell of the CSinparameter
lower
load,
SF threshold
youthe domain
uplink is
to set reduction),
domain
SF4(SF4), inter-rat NoAct,
performed.
value
this is, the easier
parameter the credit enters
to a comparatively WRFD- Load Interval traff
should ratebe load
performed.
credit LDR. Thethe uplink credit QoSRenego(unc
should be load InterFreqLDH
The
the LDR
low congestion
value. takes status, actions
the easier in LDR
the the 020106 Reshuffling Type
SF8(SF8),
reduction),
handover),
1~10 1~10
PSINTERRATSHOULDNOTLDHO:
could be triggered only when the SF ontrolled
handover),
SF16(SF16), real- O,
preset
LDR sequence
action is and judges
triggered, and the QoSRenego(unc
PSInterRatShoul
The
factor inter-RAT
corresponding SHOULDNOTBE tosuccessful.
the uplink If time traff Qos re-
AMRRateRed(A
SF32(SF32), BERateRed,
SF4, SF8,
whether
easier theeachuseractionexperience is is ontrolled
dBeLDHO(PS real-
load
reservedhandovercredit of
is the
higherPS than domain is negotiation),
MR traff rate QoSRenego,
an action Aislower
affected. unsuccessful,
code the the
resource LDR SF64(SF64),
time
domain traffinter-rat
SF4(SF4), Qos re- SF16,
NoAct,SF32,
performed.
uplinktoorthe downlink creditIfSF WRFD- Load Enumerati NoAct(no
CSInterRatShoul
reduction),
SF128(SF128), CSInterRatSh
SF64, SF128,
turns
LDR trigger next
threshold,action. an action
however, negotiation),
should
SF8(SF8), be load InterFreqLDH
The LDR
reserved takes
threshold. the actions in the 020106 Reshuffling on Type action),
dBeLDHO(CS
CSInterRatShoul
SF256(SF256) ouldBeLDHO,
SF256
is successful,
causessequence a parameter
a higher admission is set to CSInterRatShoul
handover), O,
preset and judgessuccess SF16(SF16),
BERateRed(BE
domain
dNotLDHO(CS inter-rat PSInterRatSh
NOACT,
rate because or all theresource preceding is actions dBeLDHO(CS
AMRRateRed(A BERateRed,
whether each the action is successful. If SF32(SF32),
traff
should
domain ratebe load
inter-rat
SF4, SF8,
ouldBeLDHO,
are taken,The
reserved. the downlink
parameter LDRshould is be domain
MR traffinter-rat
SF64(SF64), rate QoSRenego,
SF16, SF32,
an action is unsuccessful, the LDR reduction),
handover),
should not be AMRRateRed
finished,
set based and the system waits for should
reduction),be load CSInterRatSh
turns to theonnext action. operator's If an action WRFD- Load Enumerati SF128(SF128),
QoSRenego(unc
PSInterRatShoul
load handover),
SF64, SF128,
,
the next
requirement. triggering of the LDR. 020106 Reshuffling on Type handover),
CSInterRatShoul
SF256(SF256) ouldBeLDHO,
SF256
is successful, a parameter is set to ontrolled
dBeLDHO(PS real-
PSInterRatShoul CSInterRatSh
Because each action is performed PSInterRatShoul
dNotLDHO(CS PSInterRatSh
NOACT,
This or all the haspreceding actions time
domain traffinter-rat
Qos re-
by itsparameter
algorithm module, the same the LDR dNotLDHO(PS
dBeLDHO(PS
domain inter-rat
ouldNotLDHO
ouldBeLDHO,
are taken,
content the
asonly downlink
UlLdrFirstAction. LDR is negotiation),
should be load
algorithm selects users The and domain
domainnot
should
inter-rat
inter-rat
be
,NoAct,
AMRRateRed
finished,
selected and
actions,the systemhowever, waitsshould for WRFD- Load Enumerati CSInterRatShoul
handover),
should not be NoAct,
PSInterRatSh
delivers control messages, the should
load be load
handover), InterFreqLDH
,
the
be next triggering of the LDR.
unique. 020106 Reshuffling on Type dBeLDHO(CS
CSInterRatShoul
load handover) BERateRed,
ouldNotLDHO
execution result of each action can handover),
PSInterRatShoul O,
CSInterRatSh
Because each action is performed domain
dNotLDHO(CS inter-rat QoSRenego,
be
Thisobtained after a delay, and the AMRRateRed(A BERateRed,
by itsparameter
algorithm module, has the same the LDR dNotLDHO(PS
should
domainbe load
inter-rat
ouldNotLDHO
CSInterRatSh
LDR
content algorithm cannot wait for a long MR traffinter-rat
rate QoSRenego,
algorithm only selects users The
as UlLdrFirstAction. and domain
handover),
should not be
,
ouldBeLDHO,
time,
selected so the LDR can
actions, however,only judge should WRFD- Load Enumerati reduction),
should not be CSInterRatSh
PSInterRatSh
delivers control messages, the PSInterRatShoul
load handover), PSInterRatSh
whether
be unique. the actions succeed by 020106 Reshuffling on Type CSInterRatShoul
load handover) ouldBeLDHO,
ouldNotLDHO
execution result of each action can dBeLDHO(PS
PSInterRatShoul ouldBeLDHO,
whether candidate users are found. dNotLDHO(CS PSInterRatSh
be
Thisobtained
parameter after has a delay,
the same and the domain
dNotLDHO(PS inter-rat SInterRatSho
The inter-frequency load handover domain inter-rat ouldBeLDHO,
LDR
content algorithm cannot wait for
as UlLdrFirstAction. The a long should
domainbe load
inter-rat uldNotLDHO,
has no impact on the QoS of users should not be AMRRateRed
time,
selected so the LDR can
actions, however,only judge should WRFD- Load Enumerati handover),
should not be NoAct,
PSInterRatSh
and can balance the cell load, so load handover), ,
whether
be unique. the actions succeed by 020106 Reshuffling on Type CSInterRatShoul
load handover) BERateRed,
ouldNotLDHO
the inter-frequency load handover PSInterRatShoul CSInterRatSh
whether candidate users are found. dNotLDHO(CS QoSRenego,
usually serves as the first action. dNotLDHO(PS ouldNotLDHO
The inter-frequency load handover domain inter-rat CSInterRatSh
The BE service rate decreasing is domain inter-rat ,
has no impact on the QoS of users should not be ouldBeLDHO,
effective only when the DCCC WRFD- Load Enumerati should not be PSInterRatSh
and can balance the cell load, so load handover), PSInterRatSh
algorithm is enabled. 020106 Reshuffling on Type load handover) ouldNotLDHO
the inter-frequency load handover PSInterRatShoul ouldBeLDHO,
usually serves as the first action. dNotLDHO(PS SInterRatSho
The BE service rate reduction is domain inter-rat uldNotLDHO,
effective only when the DCCC WRFD- Load Enumerati should not be PSInterRatSh
algorithm is enabled. 020106 Reshuffling on Type load handover) ouldNotLDHO
reduction),
InterFreqLDHO(i CSInterRatSh
PSInterRatShoul
Number of RABs selected in a UL CSInterRatShoul
nter-freq load ouldBeLDHO,
dBeLDHO(PS
LDR uncontrolled real-time traffic dNotLDHO(CS
handover), PSInterRatSh
domain inter-rat
QoS renegotiation. The target domain
BERateRed(BEinter-rat ouldBeLDHO,
should be load
subscribers of this parameter are should
traff rate be
not AMRRateRed
handover), NoAct,
the PS domain real-time load handover),
reduction), ,
Number of RABs selected in a UL CSInterRatShoul BERateRed,
subscribers. The setting of this PSInterRatShoul
QoSRenego(unc CSInterRatSh
LDR uncontrolled real-time traffic dNotLDHO(CS QoSRenego,
parameter
This is analogous to the
QoS parameter hasThe
renegotiation. the same
target dNotLDHO(PS
NoAct(no
ontrolled real-
domain inter-rat
ouldNotLDHO
CSInterRatSh
setting
content ofasBE service rate reduction
subscribers of this parameterThe
UlLdrFirstAction. are domain
action),
time inter-rat
should notQos
traff
NoAct(no be re-
,
ouldBeLDHO,
subscriber
selected number.
actions, Because
however, the
should WRFD- Load Enumerati should not be
InterFreqLDHO(i
negotiation), PSInterRatSh
the PS domain real-time load
action),handover), PSInterRatSh
number
be of subscribers performing
unique. 020106 Reshuffling on Type load handover)
nter-freq load
CSInterRatShoul ouldNotLDHO
subscribers. The setting of this PSInterRatShoul
BERateRed(BE ouldBeLDHO,
QoS renegotiation may be smaller handover),
dBeLDHO(CS
parameter
This parameteris analogous
has the sameto the dNotLDHO(PS
NoAct(no
traff rate SInterRatSho
than the value of this parameter, for BERateRed(BE
domain inter-rat
setting
contentofasBE service rate reduction
UlLdrFirstAction. The domain
action),
reduction), inter-rat uldNotLDHO,
example, the candidate subscribers traff
should rate
subscriber number.
selected actions, Because
however, the
should WRFD- Load Enumerati should notload
be
InterFreqLDHO(i
QoSRenego(unc be PSInterRatSh
selected for downlink LDR do not reduction),
handover),
number
be unique.of subscribers performing 020106 Reshuffling on Type load handover)
nter-freq
ontrolled load
real- ouldNotLDHO
meet the QoS renegotiation QoSRenego(unc
PSInterRatShoul
QoS renegotiation may be smaller handover),
time traff Qos re-
If the ratio of
conditions, ULmust
you load leave
of thesome
cell to ontrolled real-
than the value of this parameter, for dBeLDHO(PS
BERateRed(BE
the uplink
margin whencapacity
settingisthis
lower than this
parameter negotiation),
example, the candidate subscribers time
domain traffinter-rat
Qos re- NoAct,
threshold,
to ensure thethe success
UL load of reshuffling
load WRFD- Load Interval traff rate
CSInterRatShoul
selected for downlink LDR do not negotiation),
should be load InterFreqLDH
function of the cell is stopped. After
reshuffling. 020106 Reshuffling Type reduction),
dBeLDHO(CS
1~10 1~10
meet the QoS renegotiation CSInterRatShoul
handover), O,
the basic congestion state of the cell QoSRenego(unc
domain inter-rat
conditions, you must leave some dBeLDHO(CS
AMRRateRed(A
NoAct(no BERateRed,
load is released, the system no ontrolled
should bereal- load
domain
MR inter-rat
margin when setting this parameter
longer implements the LDR action. timetraff
traffrate
action),
handover), Qos re- QoSRenego,
to ensure the success of load WRFD- Load Interval NoAct(no
should
reduction),be load CSInterRatSh
Because the load fluctuates, the InterFreqLDHO(i
negotiation),
PSInterRatShoul
reshuffling. 020106 Reshuffling Type action),
handover),
CSInterRatShoul
1~10 ouldBeLDHO,
1~10
difference between the LDR release nter-freq load
CSInterRatShoul
dBeLDHO(PS
BERateRed(BE
PSInterRatShoul
dNotLDHO(CS PSInterRatSh
threshold and trigger threshold handover),
dBeLDHO(CS
domain inter-rat
traff rateinter-rat
dBeLDHO(PS
domain ouldBeLDHO,
should be higher than 10%. The BERateRed(BE
domain
should inter-rat
be load
reduction),
domain
should inter-rat NoAct,
ping-pong effect of the preliminary WRFD- Load Interval traff
should ratenot
handover),
be
be load AMRRateRed
NoAct,
0~1,
QoSRenego(unc
should
load be load
handover), InterFreqLDH
,
congestion state may occur. 020106 Reshuffling Type reduction),
handover),
CSInterRatShoul
0~100 BERateRed,
step:0.01
ontrolled
handover), real-
PSInterRatShoul O,
CSInterRatSh
QoSRenego(unc
PSInterRatShoul
dNotLDHO(CS QoSRenego,
This parameter has the same time traff Qos re-
AMRRateRed(A
dNotLDHO(PS BERateRed,
ouldNotLDHO
ontrolled
dBeLDHO(PS
domain real-
inter-rat CSInterRatSh
content as UlLdrFirstAction. The negotiation),
MR
domaintraff rate
inter-rat QoSRenego,
,NoAct,
time
domain
should traff Qosbe re-
inter-rat
not ouldBeLDHO,
selected actions, however, should WRFD- Load Enumerati NoAct(no
CSInterRatShoul
reduction),
should not be CSInterRatSh
PSInterRatSh
negotiation),
should
load be load
handover), InterFreqLDH
PSInterRatSh
be unique. 020106 Reshuffling on Type action),
dBeLDHO(CS
CSInterRatShoul
load handover) ouldBeLDHO,
ouldNotLDHO
CSInterRatShoul
handover),
PSInterRatShoul O,
ouldBeLDHO,
BERateRed(BE
domain
dNotLDHO(CS inter-rat PSInterRatSh
This parameter has the same dBeLDHO(CS
AMRRateRed(A
dNotLDHO(PS BERateRed,
SInterRatSho
traff
should
domain ratebe load
inter-rat ouldBeLDHO,
content as UlLdrFirstAction. The domain
MR
domaintraffinter-rat
rate
inter-rat QoSRenego,
uldNotLDHO,
reduction),
handover),
should not be AMRRateRed
selected actions, however, should WRFD- Load Enumerati should
reduction),be
notload
be CSInterRatSh
PSInterRatSh
QoSRenego(unc
PSInterRatShoul
load handover), ,
be unique. 020106 Reshuffling on Type handover),
CSInterRatShoul
load handover) ouldBeLDHO,
ouldNotLDHO
ontrolled
dBeLDHO(PS real-
PSInterRatShoul CSInterRatSh
PSInterRatShoul
dNotLDHO(CS PSInterRatSh
This parameter has the same time
domain traffinter-rat
dNotLDHO(PS Qos re- ouldNotLDHO
dBeLDHO(PS
domain inter-rat ouldBeLDHO,
content as UlLdrFirstAction. The negotiation),
should
domain be load
inter-rat ,NoAct,
domainnot
should inter-rat
be AMRRateRed
selected actions, however, should WRFD- Load Enumerati CSInterRatShoul
handover),
should not be NoAct,
PSInterRatSh
should
load be load
handover), InterFreqLDH
,
be unique. 020106 Reshuffling on Type dBeLDHO(CS
CSInterRatShoul
load handover) BERateRed,
ouldNotLDHO
handover),
PSInterRatShoul O,
CSInterRatSh
domain
dNotLDHO(CS inter-rat QoSRenego,
This parameter has the same AMRRateRed(A
dNotLDHO(PS BERateRed,
ouldNotLDHO
should
domainbe load
inter-rat CSInterRatSh
content as UlLdrFirstAction. The MR
domaintraffinter-rat
rate QoSRenego,
,
handover),
should not be ouldBeLDHO,
selected actions, however, should WRFD- Load Enumerati reduction),
should not be CSInterRatSh
PSInterRatSh
PSInterRatShoul
load handover), PSInterRatSh
be unique. 020106 Reshuffling on Type CSInterRatShoul
load handover) ouldBeLDHO,
ouldNotLDHO
dBeLDHO(PS
PSInterRatShoul ouldBeLDHO,
dNotLDHO(CS PSInterRatSh
This parameter has the same domain
dNotLDHO(PS inter-rat SInterRatSho
domain inter-rat ouldBeLDHO,
content as UlLdrFirstAction. The should
domainbe load
inter-rat uldNotLDHO,
should not be AMRRateRed
selected actions, however, should WRFD- Load Enumerati handover),
should not be NoAct,
PSInterRatSh
load handover), ,
be unique. 020106 Reshuffling on Type CSInterRatShoul
load handover) BERateRed,
ouldNotLDHO
PSInterRatShoul CSInterRatSh
dNotLDHO(CS QoSRenego,
This parameter has the same dNotLDHO(PS ouldNotLDHO
domain inter-rat CSInterRatSh
content as UlLdrFirstAction. The domain inter-rat ,
should not be ouldBeLDHO,
selected actions, however, should WRFD- Load Enumerati should not be PSInterRatSh
load handover), PSInterRatSh
be unique. 020106 Reshuffling on Type load handover) ouldNotLDHO
PSInterRatShoul ouldBeLDHO,
This parameter has the same dNotLDHO(PS SInterRatSho
content as UlLdrFirstAction. The domain inter-rat uldNotLDHO,
selected actions, however, should WRFD- Load Enumerati should not be PSInterRatSh
be unique. 020106 Reshuffling on Type load handover) ouldNotLDHO
reshuffling function of the cell is
triggered. After the basic congestion
state of the cell load is released, the
system no longer implements the
LDR action. Because the load
fluctuates, the difference between
the LDR release threshold and
trigger threshold should be higher
than 10%. The ping-pong effect of
This parameter specifies the
the preliminary congestion state WRFD- Load Interval 0~1,
maximum number of TFCs 3.4/6.8/13.6
may occur. 020106 Reshuffling Type 0~100 step:0.01
(Transport Format Combination) /27.2 kbit/s
allowed in the uplink. The larger the RRC D16, D32, D48, 16, 32, 48,
Smooth filtering coefficient for UL
value of this parameter, the larger Connection D64, D96, D128, 64, 96, 128,
measured values. The smooth
the number of available TFCs in the WRFD- and RAB Enumerati D256, D512, 256, 512,
filtering algorithm is used to avoid
uplink. 010510 Assignment on Type D1024 1024
random interference in Dynamic D0, D1, D2, D3,
measurement reporting. Channel D4, D5, D6, D7, 0, 1, 2, 3, 4,
Smoothness is decided by the Configuratio D8, D9, D11, 5, 6, 7, 8, 9,
The percentage
filtering coefficient of of
thethe WRFD- n Control Enumerati D13, D15, D17, 11, 13, 15,
conversational
measurement. non-AMR service 021101 (DCCC) on Type D19 17, 19
threshold to the 100% uplink load. It Dynamic
This parameter
is applicable determines
to algorithm 1 andwhether Channel
the uplink intermediate
algorithm 2. The parameter is rate uses used Configuratio AUTO_CALC,
automatic
for controlling or manual
the non-AMR mode when service WRFD- n Control Enumerati HAND_APPOIN
using 3-stepThat
admission. adjustment. 021101 (DCCC) on Type T 0, 1
Threshold of the is, ULwhen a non-
intermediate Dynamic
AMR
rate whenservice theis3-step
accessing, mode the is used RNC Channel
evaluates
for UL ratethe measurement
adjustment and the value of Configuratio D16, D32, D64, 16, 32, 64,
To
The
the adjust
percentage
uplink the
loadUL AMR
of the speech rate,
manual mode isafter
used theforservice
UL is WRFD- n Control Enumerati D128, D144, 128, 144,
AMRC
accessed. delivers
conversational If the the
non-AMR
UL TFC
load CONTROL
service
of a cell is
intermediate rate adjustment. 021101 (DCCC) on Type D256, D384 256, 384
command
threshold
higher than and
to thestarts
this 100%this
threshold timer.
uplink after If no
load.
the It AMR/WB-
The
failurepercentage
message of
is other service
received when AMR
is
To applicable
access
adjust of a
the to algorithm
non-AMR
UL wideband speech1 and
AMR
thresholds
UL activity to the of 100% uplink load.
the timerthis
algorithm
service,
speech 2.factor
expires,
rate, The
service
AMRC
the the
parameter
will
R99
adjustment isnon
be rejected.
delivers theused of Speech
The
AMR
the services
UL conversational
AMR refer
speech to other
service.
rate is WRFD- Rates Interval
for
If controlling
theCONTROL
UL load the
of a non-AMR
cell service
TFC
admissions
Signals
successful. might except
beis, the will not
command
discontinuously
andbe
020701 Control Type 1~64000 1~64000
admission.
higher
starts this That
thantimer.thisAMR when
threshold,
If no failureathis
non- AMR/WB-
conversational
transmitted because service,
of the the RNC
AMR
service
message service
willis be isadmitted.
accessing,
received when the timer AMR
conversational
activation detection non-AMR of service,
evaluates
The UL
expires, load
the the measurement
factor
adjustment thresholds
of the value
UL of Speech
and
The handover
percentage
conversational scenarios.
of the handover
service and It is
source
the uplink
include
wideband load
parameters
AMR after
speech ofthe[UL service
rate threshold
is is WRFD- Rates Interval
applicable
service
changes ofto
admission algorithmthreshold1 and toactivity
the
accessed.
of Conv non_AMR
successful. Ifdata
the UL service.
load of
service],
The a[UL cell is 020701 Control Type 1~64000 1~64000
algorithm
100%
factor uplink
is 2. The
defined load. parameter
as Ittheis applicable
ratio isofused to
higher
handover than this threshold
access threshold] after
andthe [UL
for controlling
algorithm
signal 1 and
transmission other service
algorithm
time to 2.channel
The
access
threshold of ofa non-AMR
other is, speechThe
services].
admissions.
parameter
occupation isThat
usedThe forwhen a service
controlling the
service,
four thistime.
parameters service can
activity
will
be be rejected.
used
factors
to limit
is accessing,
handover
of the same the RNCThat
admission.
transport evaluates
channel is, when the
might WRFD- Admission Interval 0~1, step:
If
thethe UL load of
proportion a cell will
between thenot be
measurement
a
be service
different is handing
in value
UL and of
overthe
DL. touplink
a cell, 020101 Control Type 0~100 0.01
higher than thisservice,
conversational threshold, this
handover
load
the RNC afterevaluates
the service theis accessed. If
service
user and will be admitted.
other services in a specific
the UL load of value
measurement a cell of is higher
the uplink than
The
cell, UL
and load
to factor thresholds
guarantee the access
this
loadthreshold
after the service after theisaccess accessed. of a If
include
priority parameters
of theservice of [UL threshold
conversational non- WRFD- Admission Interval 0~1,
service,
the UL load this of a cell will be rejected.
is higher than
of
AMR Conv non_AMR service], [UL
service. 020101 Control Type 0~100 step:0.01
If thethreshold
this UL load after of a cell the will
access,not be this
handover access threshold] and [UL
higher
servicethan will be thisrejected.
threshold, If thethisUL
threshold of other services]. The
service
load of awill cell bewill admitted.
not be higher than
four parameters can be used to limit
The UL load factor
this threshold, thresholds
this service will be WRFD- Admission Interval 0~1,
the proportion between the
include
admitted. parameters of [UL threshold 020101 Control Type 0~100 step:0.01
conversational service, handover
of Conv non_AMR service], [UL
user and other services in a specific
handover access threshold] and [UL
cell, and to guarantee the access
threshold of other services]. The
priority of the conversational non- WRFD- Admission Interval 0~1,
four parameters can be used to limit
AMR service. 020101 Control Type 0~100 step:0.01
the proportion between the
conversational service, handover
user and other services in a specific
cell, and to guarantee the access WRFD- Admission Interval 0~1,
priority of other services. 020101 Control Type 0~100 step:0.01
The internal counter is incremented
proportion, set
by 1 with each execution. If the
UlOlcFTFRstrctRabNum and
number of overloads does not
DlOlcFTFRstrctRabNum to
exceed the OLC action threshold,
comparatively low values. If the
the system lowers the BE service
high-rate subscribers occupy a low
rate by lowering TF to relieve the
proportion, set
overload. If the number of overloads
UlOlcFTFRstrctRabNum and
exceeds the OLC action threshold,
DlOlcFTFRstrctRabNum to
the previous operation has no Load
comparatively high values.
obvious
Length ofeffect smoothingon alleviatingfilter window the of WRFD- Measureme Interval
The higher the parameters are, the
overload
uplink OLC.
User release and the
is an system
extreme has to
method 020102 nt Type 1~32 1~32
more users are involved in fast TF
release
in users
reducingunder to
the cell solveload the and overload
restriction
If the
the ratio of UL load of the cell tosame
problem.
recovering the
conditions,
the uplink the system
quicker when
the cell theloadcell
The
is lower capacity
overloaded the andparameters is lower
congested.
thanthe
are, this
decreases,
threshold, and the more user andQoS WRFD- Overload Interval
more
The likelythe
mechanism theUL usersoverload
of theare OLC released,
is that
is affected.
congestion control function of the 020107 Control Type 1~10 1~10
resulting
an actioninis negative
performed effect
in each on [OLC
cell
systemis stopped.
performance. The value If the of the
period]
L3 filteringand some services
coefficient. The are larger the
OLC releaseare
parameters threshold
excessively should not
high,
selected
value of this based on
parameter, the action rules
the stronger
be
the much
overload lower statusthanisorreleasedclose to the WRFD- Overload Interval
to
theperform
smoothing this effect
action.and This the higher D0, D1, D2,
OLC
slowly. trigger threshold, or the system 020107 Control Type 0~100 0~100
parameter defines the
the anti-slow-fading maximum
capability, but D0, D1, D2, D3, D3, D4, D5,
state may have a ping-pong effect.
number
the lowerofthe RABssignal released
changeintracing D4, D5, D6, D7, D6, D7, D8,
The recommended difference
executing
capability. uplink
For detailed OLC service information Load D8, D9, D11, D9, D11,
between the OLC release threshold
release.
of this parameter, refer to 3GPP TS WRFD- Measureme Enumerati D13, D15, D17, D13, D15,
and the OLC trigger threshold is
For the users of a single service, the
25.433. 020102 nt on Type D19 D17, D19
higher than 10%. It is desirable to
releasing of RABs means the
set
If theratio
the twoofparameters
UL load a bitcellhigher
complete releasing of ofthethe users.to The
given
the that
uplink of the difference
capacity is not lowerbetween
releasing RABs causes call than
OLC
this trigger threshold
threshold, the UL overload and OLCand WRFD- Overload Interval 0~1,
drops,
Number soofUlOlcFTFRstrctTimes
users selected in a UL or
release
congestion threshold is
control function fixed. of be
theset 020107 Control Type 0~100 step:0.01
DlOlcFTFRstrctTimes
LDR PS domain inter-RAT should
cell
to a is
lowtriggered.
value. The value
Higher values ofofthe
SHOULDBE load handover. Thethe
OLC release
parameter get threshold
the cell should
load to not
target subscribers of this parameter
be much
decrease lower than or close to the
are the PSmore domain obviously,
subscribers. but the In WRFD- Overload Interval
Number
OLC
QoS will of
trigger
be users
threshold,
affected. selected or the in asystem
UL 020107 Control Type 0~10 0~10
the actual system, this parameter
LDR
state PS maydomain
have ainter-RATping-pong effect.
can be set on the basis of the actual
SHOULDBE
The recommended load handover. differenceThe
circumstances.
UL OLC trigger Ifhysteresis.This
the high-rate Load
target
between subscribers
the OLC release of this parameter
threshold
subscribers
parameter occupy
can avoid atouching
high offIn WRFD- Measureme Interval 10~60000,
are
and the
the PS
OLC domain
trigger subscribers.
threshold is
Number
proportion,
OLC event of users
set theselected
continually. parameter in ato UL a 020102 nt Type 1~6000 step:10
the
higheractual
than system, Itthis
10%.inter-RAT parameter
is desirable to
LDR PS
comparatively domain low value. If the high-
can
set be two
the set on the basis aofbit
parameters thehigher
actual
SHOULDNOTBE
rate subscribers occupy load handover.a low
circumstances.
given that the If the high-rate
difference between
The target subscribers
proportion, set the parameter of this to a
subscribers
OLC triggerare occupy
threshold a high
and OLC WRFD- Overload Interval 0~1,
parameter
comparatively the PS
high value.domain Because
Number
proportion,
release of users
set theselected
threshold isparameter
fixed. in atoUL a 020107 Control Type 0~100 step:0.01
subscribers.
the basic In the actual
congestion control system,
LDR PS domain
comparatively lowinter-RAT
value. If the high-
this parameter
algorithm can be to
is designed setslowly
on the
SHOULDNOTBE
rate subscribers occupy load handover.a low
basis
decrease of the cellactual
load, circumstances.
you setIf
The target subscribers
proportion, set the parameter of this to
need
to a
the
this high-rate
parameter subscribers
to a comparativelyoccupy a WRFD- Load Interval
parameter
comparatively are highthe PS value.domain Because
high
low proportion, set the parameter
value. 020106 Reshuffling Type 1~10 1~10
subscribers.
the basic congestion In the actual control system,
to a comparatively low value. If the
this parameter
algorithm can be to
is designed setslowly
on the
high-rate subscribers occupy a low
basis
decrease of the cellactual
load,circumstances.
you need to setIf
proportion, set the parameter to a
the
this high-rate
parametersubscribersto a comparatively occupy a WRFD- Load Interval
comparatively high value. Because
high proportion, set the parameter
low value. 020106 Reshuffling Type 1~10 1~10
the basic congestion control
to a comparatively low value. If the
algorithm is designed to slowly
high-rate subscribers occupy a low
decrease cell load, you need to set
proportion, set the parameter to a
this parameter to a comparatively WRFD- Load Interval
comparatively high value. Because
low value. 020106 Reshuffling Type 1~10 1~10
the basic congestion control
algorithm is designed to slowly
decrease cell load, you need to set
this parameter to a comparatively WRFD- Load Interval
low value. 020106 Reshuffling Type 1~10 1~10
measurement is stopped, and the
compressed mode is deactivated, if
any. If this parameter is set to 0, this AMR/WB-
indicates that the timer will not be AMR
started. Speech
For the inter-frequency or inter-RAT Rates
Rate adjustment
measurement switch
based on of link
coverage, Control
AMR/WB-
stability control for
the compressed mode can be UL QoS of AMR WRFD- Inter-RAT
AMR
services. When the
stopped through parameter
reporting event is 2F.
set 020701 Handover
Speech
to
For YES, UL
measurementrate of AMR services
that is not based WRFD- Based on Enumerati
Inter-frequency handover switch of Rates
can
on be adjusted. 020309 DL QoS on Type NO, YES NO, YES
linkcoverage, event for
stability control 2F UL
is not
QoS of Control
AMR/WB-
reported,
AMR services.and the Whentimerthemust be set
parameter WRFD- Inter-RAT
AMR
but
is setshould
to YES, notinter-frequency
be set to 0. 020701 Handover
Speech
As for the can
handover impact on networkfor
be performed WRFD- Based on Enumerati
Inter-RAT handover switch of link Rates
performance:
AMR services to ensure the QoS. 020309 Inter
DL QoS on Type NO, YES NO, YES
stability control for UL QoS of AMR Control
It reduces the influence of long time Frequency
services. When the parameter is set WRFD- Inter-RAT
compressed mode to the serving Hard
to YES, inter-RAT handover can be 020701 Handover
cell. Handover
performed for AMR services to WRFD- Based on Enumerati
The compressed mode may be Based on
ensure the QoS. 020309 DL QoS on Type NO, YES NO, YES
stopped ahead of time, which can DL QoS
cause the result that the UE fails to WRFD- Inter-RAT
initiate inter-frequency or inter-RAT 020304 Handover
handover, and thus can lead to call WRFD- Based on Interval
Inter-frequency handover switch of Inter
drops. 020309 DL QoS Type 0~512 0~512
link stability control for UL QoS of Frequency
AMR/WB-
VP services. When the parameter is Hard
AMR
set to YES, inter-frequency Handover
Speech
handover can be performed for VP WRFD- Based on Enumerati
Rates
services to ensure the QoS. 020304 DL QoS on Type NO, YES NO, YES
Rate adjustment switch of link Control
AMR/WB-
stability control for UL QoS of WRFD- Inter-RAT
AMR
WAMR services. When the 020701 Handover
Inter-frequency handover switch of Speech
parameter is set to YES, UL rate of WRFD- Based on Enumerati
link stability control for UL QoS of Rates
WAMR services can be adjusted. 020309 DL QoS on Type NO, YES NO, YES
WAMR services. When the Control
AMR/WB-
parameter is set to YES, inter- WRFD- Inter-RAT
CM implementation AMR
frequency handoverapproach
can be 020701 Handover
selection Speech
performedbasis. Whenservices
for WAMR the uplink to WRFD- Based on Enumerati
Inter-RAT
spreading handover
factor is switch than
greater of linkor Rates
ensure the QoS. 020309 DL QoS on Type NO, YES NO, YES
stability
equal to control for UL QoS
this parameter value,of the Control
WAMR services.
SF/2 approach When
will the
be preferred. WRFD- Inter-RAT
parameter
Otherwise, the high layer inter-RAT
is set to YES, scheduling 020701 Handover
handover can be performed for
will be preferred. WRFD- Based on Enumerati
WAMR
The services to ensure the QoS. 020309 DL QoS on Type NO, YES NO, YES
This SF/2 approach
parameter consumes
determines more
whether Dynamic
system resources
the UL rate is loweredand to
therefore
the this Channel
approach
minimum rate is recommended
in one step oronly twofor Configuratio
low-rate
steps forusers.
BE serviceThe high-layer
set up on DCH WRFD- n Control Enumerati 2_Rates, 2_Rates,
scheduling
in uplink. requires variable 021101 Inter-RAT
(DCCC) on Type 3_Rates 3_Rates
This parameter determines whether Dynamic
multiplexing positions of transport Handover
the UL rate is raised to the Channel
channels and is applicable to a Based on
maximum rate in one step or two Configuratio
relatively narrow range. In addition, Coverage
UL
stepsactivity
for BE factor of SRB.Signals
service set up on DCH WRFD- n Control Enumerati 2_Rates, 2_Rates,
this approach affects the Inter
might be discontinuously transmitted
in uplink. 021101 (DCCC) on Type 3_Rates 3_Rates
transmission rate of users and Frequency
because of the activation detection
therefore is recommended only WRFD- Hard
of conversational service and
when the SF/2 approach is 020303 Handover D8, D16, D32,
source changes of data service. The
unavailable or there are high-rate WRFD- Based on Enumerati D64, D128, 8, 16, 32, 64,
activity factor is defined as the ratio
users. 020302 Coverage on Type D256 128, 256
of signal transmission time to
channel occupation time. The
activity factors of the same transport
channel might be different in UL and WRFD- Admission Interval 0~1, step:
DL. 020101 Control Type 0~100 0.01
UL activity factor of the R99
streaming service. Signals might be
discontinuously transmitted because
This parameter specifies the E-DCH
of the activation detection of
data transfer mode of SRB services. SCHEDULED, SCHEDULED
conversational service and source
It is valid only when SRB services WRFD- SRB over Enumerati NON- , NON-
changes of data service. The activity
are mapped onto the E-DCH. 010636 HSUPA on Type SCHEDULED SCHEDULED
factor is defined as the ratio of
signal transmission time to channel
This parameter specifies the rate
occupation time. The activity factors
threshold for decision to use E-DCH
of the same transport channel might WRFD- Admission Interval 0~1, step:
to carry UL PS domain streaming
be different in UL and DL. 020101 Control
AMR/WB- Type 0~100 0.01
services. When the maximum UL
service rate is higher than or equal AMR D8, D16, D32,
to this threshold, the service will be Speech
Streaming D64, D128, 8, 16, 32, 64,
Measurement
carried on E-DCH.reporting threshold
Otherwise, for
it will WRFD- Rates
Traffic Class Enumerati D144, D256, 128, 144,
triggering
be carriedevent 6A1. The event
on DCH. 010632 Control
on HSUPA on Type D384 256, 384
This parameter specifies the E-DCH AMR/WB-
reporting mode is used. Dynamic
data transfer mode of streaming AMR
Event 6A1 is triggered when the Channel
Measurement reporting
services. It is valid threshold for
only when Speech
Streaming SCHEDULED, SCHEDULED
measured value is higher than the Configuratio
triggering
streaming event 6A2.
services areThe event onto
mapped WRFD- Rates
Traffic Class Enumerati NON- , NON-
absolute threshold 6A1. This event WRFD- n Control
reporting
the E-DCH. mode is used. Event 6A2 010632 Control
on HSUPA on Type SCHEDULED SCHEDULED
can trigger UL QoS operation. This 020701 AMR/WB-
(DCCC)
is triggered when the measured Dynamic
parameter specifies a relative WRFD- AMR
Inter-RAT
value is higher than the absolute Channel
Measurement reporting
threshold. Absolute threshold
threshold for
of 6A1 021101 Speech
Handover
threshold 6A2. When this event Configuratio
triggering
= Max Ul Tx event 6B1.
Power The event
- Relative WRFD- Rates
Based on Interval
report is received, UL rate of AMR WRFD- n Control
reporting
threshold mode
of 6A1.is used. Event 6B1 020309 Control
DL QoS Type 0~82 0~82
or BE services cannot be raised. 020701 AMR/WB-
(DCCC)
is triggered when the measured Dynamic
This parameter specifies a relative WRFD- AMR
Inter-RAT
value is lower than the absolute Channel
Measurement reporting
threshold. Absolute threshold
threshold for
of 6A2 021101 Speech
Handover
threshold 6B1. When this event Configuratio
triggering event 6B2. The
= Max Ul Tx Power - Relative event WRFD- Rates
Based on Interval
report is received, UL QoS WRFD- n Control
reporting
threshold mode
of 6A2.is used. Event 6B2 020309 Control
DL QoS Type 0~82 0~82
operation is stopped. This 020701 (DCCC)
is triggered when the measured Dynamic
parameter specifies a relative WRFD- Inter-RAT
value is lower than the absolute Channel
threshold. Absolute threshold of 6B1 021101 Handover
threshold 6B2. When this event Configuratio
= Max Ul Tx Power - Relative WRFD- Based on Interval
report is received, UL rate of AMR WRFD- n Control
threshold of 6B1. 020309 DL QoS Type 0~82 0~82
or BE services can be raised. This 020701 (DCCC)
parameter specifies a relative WRFD- Inter-RAT
threshold. Absolute threshold of 6B2 021101 Handover
When the algorithm 2 is used, this
= Max Ul Tx Power - Relative WRFD- Based on Interval
parameter defines the total
threshold of 6B2. 020309 DL QoS Type 0~82 0~82
equivalent user numbers
corresponding to the 100% uplink
load. The parameter should be
related to the admission threshold WRFD- Admission Interval
and actual condition of the network. 020101 Control Type 1~200 1~200
This parameter specifies the step
size of the closed-loop power
control performed on UL DPCH. For Inner Loop
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
details of this parameter, refer to the WRFD- Power Interval
of VP keeps fulfilling the 6A1 Inter D40, D60, D80, 60, 80, 100,
3GPP TS 25.214. 020504 Control Type 1~2 1~2
measurement condition before the Frequency D100, D120, 120, 160,
event 6A1 is triggered. The trigger Hard D160, D200, 200, 240,
time is used to prevent the sudden Handover D240, D320, 320, 640,
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
change of the measured value for WRFD- Based on Enumerati D640, D1280, 1280, 2560,
of VP keeps fulfilling the 6B1 Inter D40, D60, D80, 60, 80, 100,
being reported. 020304 DL QoS on Type D2560, D5000 5000
measurement condition before the Frequency D100, D120, 120, 160,
event 6B1 is triggered. The trigger Hard D160, D200, 200, 240,
time is used to prevent the sudden Handover D240, D320, 320, 640,
change of the measured value for WRFD- Based on Enumerati D640, D1280, 1280, 2560,
being reported. 020304 DL QoS on Type D2560, D5000 5000
mode or the unbalanced mode.
When this parameter is set to YES,
you can set the DIP switches on the
interface boards. You do not need
Duration when the measured value D0, D10, D20, 0, 10, 20, 40,
to set the DIP switches by turning
of VP keeps fulfilling the 6D Inter D40, D60, D80, 60, 80, 100,
them inwards or outwards. In this
measurement condition before the Frequency D100, D120, 120, 160,
case, an interface board can be
event 6D is triggered. The trigger Hard D160, D200, 200, 240,
made to work in E1_UNBA, E1_BA,
time is used to prevent the sudden Handover D240, D320, 320, 640,
or T1 mode. When this parameter is
change of the measured value for WRFD- Based on Enumerati D640, D1280, 1280, 2560,
set to NO, you cannot set the DIP
being reported. 020304 DL QoS on Type D2560, D5000 5000
switches on the interface boards.
You must set the DIP switches by
turning them inwards or outwards. In ATM over
this case, an interface board can be WRFD- E1T1 on Iub Enumerati NO(NO),
made to work in E1 or T1 mode. 05030101 Interface on Type YES(YES) NO, YES
Estimated altitude of an uncertain
area in the cell center in the WGS- Cell ID +
84 coordinates. RTT
This parameter specifies the
This is controlled by MTRLGY and WRFD- Function Interval
estimated altitude of an uncertain
valid when MET~0(metric system). 020801 Based LCS Type 0~990 0~990
area in the cell center in the WGS-
84 coordinates. Cell ID +
This is controlled by MTRLGY and RTT
valid when IMP~1(British WRFD- Function Interval
measurement). 020801 Based LCS Type 0~3248 0~3248
Length of the semi-major axis of an Cell ID +
uncertain area in the cell center. RTT
This is controlled by MTRLGY and WRFD- Function Interval
This parameter specifies the length
valid when MET~0(metric system). 020801 Based LCS Type 0~1800000 0~1800000
of the semi-major axis of an
uncertain area in the cell center. Cell ID +
This is controlled by MTRLGY and RTT
valid when IMP~1(British WRFD- Function Interval
measurement). 020801 Based LCS Type 0~5905440 0~5905440
Length of the semi-minor axis of an Cell ID +
uncertain area in the cell center. RTT
This is controlled by MTRLGY and WRFD- Function Interval
This parameter specifies the length
valid when MET~0(metric system). 020801 Based LCS Type 0~1800000 0~1800000
of the semi-minor axis of an
0~31(AEUa),
uncertain area in the cell center. Cell ID +
0~125(E1 of
This is controlled by MTRLGY and RTT
AOUa),
valid when IMP~1(British WRFD- Function Interval
0~167(T1 of
measurement). 020801 Based LCS Type 0~5905440 0~5905440
AOUa),
0~251(E1 of
AOUc),
Interval 0~335(T1 of
UNI link number None None Type 0~335 AOUc)
This parameter specifies the
coefficient of the maximum duration
of each counting. The maximum
duration is MCCH modification WRFD- MBMS Interval
Dynamic
period multiplied by this parameter. 010660 Phase 2 Type 2~20 2~20
AAL2
ATM QoS
Connections
Introduction
Whether to indicate it is the upper in
on Hub
level adjacent node when "Is Root WRFD- Iub/IuCS/Iur Interval
NodeB
Node" is set to No. 05030104 Interface Type 0~4599 0~4599
(Overbookin
Upper class transport resource g on Hub
group No. It is valid only when " Is Node B
First Class Transport Resource WRFD- Transmissio Interval
Group " is set to NO. 050406 n) Type 0~2047 0~2047
128~191(AEU
a),
256~383(AO
Ua),
Interval
384~447(UOI
A cell can
Upper belongs
number to logical
of the multipleport
URAs. None None Type 512~1535 512~1535
a_ATM),
This parameter indicates the ID of
512~767(AO
the first URA that the cell belongs
Uc),
to. The URA is used only by the
A cell can belongs to multiple URAs. Interval 128~447,512~7 512~767(UOI
UTRAN and not known by the CN.
This
Upper parameter indicates
number of theport
the logical ID of None None Type 67 c)
When the UE is in the URA_PCH
the second URA that the cell
state, the location of the UE is
belongs to. The URA is used only by
identified by the URA. For detailed 3GPP
the UTRAN and not known by the
information about this parameter, WRFD- Specificatio Interval
CN. When the UE is in the
A celltocan
refer belongs
3GPP to multiple URAs.
TS 25.331. 010101 ns Type 0~65535 0~65535
URA_PCH state, the location of the
This parameter indicates the ID of
UE is identified by the URA. For
the third URA that the cell belongs
detailed information about this 3GPP
to. The URA is used only by the
parameter, refer to 3GPP TS WRFD- Specificatio Interval
UTRAN and not known by the CN.
A cell can belongs to multiple URAs.
25.331. 010101 ns Type 0~65535 0~65535
When the UE is in the URA_PCH
This parameter indicates the ID of
state, the location of the UE is
the fourth URA that the cell belongs
identified by the URA. For detailed 3GPP
to. The URA is used only by the
information about this parameter, WRFD- Specificatio Interval
UTRAN and not known by the CN.
A celltocan
refer belongs
3GPP to multiple URAs.
TS 25.331. 010101 ns Type 0~65535 0~65535
When the UE is in the URA_PCH
This parameter indicates the ID of
state, the location of the UE is
the fifth URA that the cell belongs
identified by the URA. For detailed 3GPP
to. The URA is used only by the
information about this parameter, WRFD- Specificatio Interval
UTRAN and not known by the CN.
A celltocan
refer belongs
3GPP to multiple URAs.
TS 25.331. 010101 ns Type 0~65535 0~65535
When the UE is in the URA_PCH
This parameter indicates the ID of
state, the location of the UE is
the sixth URA that the cell belongs
identified by the URA. For detailed 3GPP
to. The URA is used only by the
A cell can belongs
information to multiple
about this URAs.
parameter, WRFD- Specificatio Interval
UTRAN and not known by the CN.
This
refer parameter
to 3GPP TS indicates
25.331.the ID of 010101 ns Type 0~65535 0~65535
When the UE is in the URA_PCH
the seventh URA that the cell
state, the location of the UE is
belongs to. The URA is used only by
identified by the URA. For detailed 3GPP
the UTRAN and not known by the
information about this parameter, WRFD- Specificatio Interval
CN. When the UE is in the
A celltocan
refer belongs
3GPP to multiple URAs.
TS 25.331. 010101 ns Type 0~65535 0~65535
URA_PCH state, the location of the
This parameter indicates the ID of
UE is identified by the URA. For
the eighth URA that the cell belongs
detailed information about this 3GPP
to. The URA is used only by the
parameter, refer to 3GPP TS WRFD- Specificatio Interval
UTRAN and not known by the CN.
25.331. 010101 ns Type 0~65535 0~65535
When the UE is in the URA_PCH
state, the location of the UE is
identified by the URA. For detailed 3GPP
information about this parameter, WRFD- Specificatio Interval
refer to 3GPP TS 25.331. 010101 ns Type 0~65535 0~65535
Identity of the UTRAN registration
area. The URA is only used by the
3GPP
UTRAN and the CN does not know
WRFD- Specificatio Interval
the URA. The URA consists of
URA ID. 010101 ns Type 0~65535 0~65535
multiple cells. When the UE enters
the URA-PCH state, the location of
the UE is identified with the URA ID. 3GPP
For details, refer to the 3GPP TS WRFD- Specificatio Interval
25.331 protocol. 010101 ns Type 0~65535 0~65535
meets
threshold
the
meet offset
currently theused
the ofcondition
for
coverage the
the current
inter-RAT
UTRAN Mother_RAT
related frequencycell; +
frequency
Threshold
measurement
CIO
that
H >=
is currently
represents
of used
Tother_RAT control
the used frequency
+
hysteresis. ofH/2,
in event
the the
GSM 2B.is
quality
requirements
below this of
threshold the current
and the [Inter-
for
One triggering
system
system; of the
starts inter-frequency
necessary
the delay conditions
triggering
Hysteresis
services;
RAT
This PSmet the
handover
parameter can eventreduce decision
configures wrong
2F indicates THD]
the that
used is
measurement
can
timer be
Mother_RATand only
reports with when
indicates themeasurement
3A the
the eventquality whenof
decisions
the frequency
reached.
frequency caused quality
measurement by signal
of the jitters.
quantitycell is to
quantity
the
the used
timer
measurement of RSCP
frequency
expires. result for CS
isoflowerthe domainGSMthan
When
restored,
To set the
theand
this signal thus
parameter, quality
this of the
parameter
you need cell is
at
trigger
services.
this
In
the threshold
which,
RSSI; current
inter-RAT
(Event measurement
frequency 2Bis can
poor, be to
usually
consider
for the set the
purpose lower
following
of than
Qos-based the triggering
factors:
For
QUsed CS represents
triggered
Tother_RAT domainonlyparameter services,
when
indicates the both ifconditions
estimated
the the value
inter-RAT
namely,
threshold
When
handover. the thisof
event
The event 2F,
report
parameter or isis
mode under
is set is the
valid
of
are [Inter-frequency
met.)
quality
handover of the
decisioncurrent measureUTRAN;
threshold; report
specified
equally
adopted
when the to threshold,
for the
event the threshold you
intra-frequency
reporting can
of eventinferis2D.
mode]
After
Tused
Cell
that the
is
handover, set
represents
Individual
current
toOffset
EVENT_TRIGGER,
even the
frequency (CIO)themode
ifquality inter-
indicates
cannot
For
Numbercombined
measurement,
selected of
for UTRAN services,
only
inter-RAT. Registration
when the the quality 3GPP D1, D2, D3,
this parameter
frequency
threshold
the offset for
of the
the isinter-RAT
measurement used tofrequency
current isset the
triggered
cell;
meet
parameter
Areas
of the
Ec/No: the
(URAs) coverage
currently configuration
signal-to-noise which
used related
the
frequency
ratiofor
cell the CS WRFD- Specificatio Enumerati D1, D2, D3, D4, D4, D5, D6,
Threshold
measurement
again,
that it is
is currently of
very used
control frequency
difficult of to event
hand quality
2B.
over Inter
H represents
requirements
domain
belongs
meets
RSCP: theservices
to.
received of used
the
following hysteresis.
the
is
signal
in the GSM
current
adopted
condition code when
power 010101 ns on Type D5, D6, D7, D8 D7, D8
for
One
the triggering
UE
system; of the
again inter-frequency
necessary
toreduce
the 2F cell conditions
of currently Frequency
Hysteresis
services;
CS
QUsed domain
CPICH_Ec/NO: <=the can
TUsedevent
services the are
- measurement
H3a/2 wrong
indicates
measurement included.
and thethat
measurement
can
used be
Mother_RAT met
frequency. only with when
That
indicates the
is,the this quality of Hard
decisions
the
As frequency
for
quality the
ofof caused
impact
the quality
target onby signal
of
network the jitters.
cell is
quantity
the used
parameter
measurement
used Ec/No
frequency
is usually
result forfrequency
for event is PS
set
of
2D
lower
the domain
lower and
GSMthan 2F,
than Handover
When
restored,
performance,
meets
with unitthe signal
and
thethreshold
of dBthus
condition quality
this of the cell+is
parameter
Mother_RAT at
HSPA
this
the
RSSI; start services.
threshold (Event for 2Bevent can2F beor WRFD- Based on Interval
the
the
CIO current
usually
larger
>=
CPICH_RSCP: set the
Tother_RATfrequency
lower than
parameter,
the + is
the
H/2,
measurement poor,triggering
the the easier
For HSPA
triggered
equal to this
the services,
only when ifboth
threshold the value
conditions of
Tother_RAT
namely,
threshold
the
systemtriggering
quantity starts
used
indicates
parameter
of event of
forevent
the 2F, of
delay
event
theis
or2D
3A.
event set 2D.
inter-RAT
isunder
When
triggering
and the
2F,the
020302 Coverage Type -24~0 -24~0
[Inter-frequency
are met.)
handover decision measure
threshold; report
specified
equally
frequency
timer
with and
unit to ofthreshold,
the
quality
reports
dBm threshold
is
the you
acceptable
3A can
ofeventeventinfer
for2D.
when Inter-RAT
mode]
After
Cell is set toOffset
handover,
Individual EVENT_TRIGGER,
even (CIO) if thecannot inter-
indicates
that
For
the the
combined
UE, current
the frequency
services,
inhandover theoccur
The
this timer
RNC,
parameter
frequency
the offset
expires.
of
the
the usedmay
coverage-based
isinter-RAT
measurement to is set the if
triggered
cell;
Handover
meet
parameter
the
In which,
inter-RAT the
value coverage
of configuration
this related
parameter for the
is CS
set WRFD- Based on Interval
Threshold
measurement
again,
H it is measurement,
represents
requirements
of
very used
control
the
of
frequency
difficult
hysteresis.
the
oftoevent
current
may
hand quality
2B.
over Inter
domain
excessively
QUsed
configure
for services
represents
triggering that high.the is adopted
the
inter-RAT
inter-frequency estimated when 020303 Coverage Type -24~0 -24~0
One
the UE of the
Hysteresis again necessary
can toreduce
the 2F cell conditions
of currently
wrong Frequency
services;
CS domain
quality of the
the event
services
current
quantity are indicates
UTRAN;
are included.
delivered that
measurement
can
used be met
frequency. only with when
That measurement
the
is, this quality of Hard
decisions
the
As
Tused frequency
for the caused
impact
represents quality
onby
the signal
of
network the
quality jitters.
cell is
according
quantity
the used
parameter to
offrequency
RSCP
is event
usually for2Dis PS
set that
lower domain
lower triggers
thanthan Handover
When
restored,
performance,
threshold theand signal
for thus
the quality
this parameter
current of the cell is
frequency at
the
HSPA
this
the measurement,
start services.
threshold threshold (Event which
for 2Bevent causes
can beorthe
2F WRFD- Based on Interval
the
the
that current
usually
larger
is set
currentlythe frequency
lower than
parameter,
used is
inthe poor,
the triggering
the GSMeasier
result
For HSPA
triggered
equal that
to this
the the
services,
only Qos-based
when
threshold ifboththe
of inter-RAT
value
conditions of
namely,
threshold
the triggering
system;
measurement
parameter
of event of event
cannot 2F,refer orisevent
3A. isunder
setthe
When
to
2D.
the
the
020302 Coverage Type -115~-25 -115~-25
[Inter-frequency
are met.) measure report
specified
equally
frequency
Mother_RAT to threshold,
the
quality threshold
indicates is you
acceptable
the can
of eventinfer
for2D. Inter-RAT
coverage-based
mode]
After is
handover, set to configurations.
EVENT_TRIGGER,
even if thecannot inter-
that
For
the the
combined
UE, current
the frequency
services,
handover the
measurement
Under
this this
parameter
frequency result
condition,
is used
measurement ofitmaythe
is
to occur
GSM
necessary
isset the if
triggered
Handover
meet
parameter
the
RSSI; the
value coverage
of configuration
this related
parameter for the
is setCS WRFD- Based on Interval
for the itQos-based
measurement
again, is very control inter-RAToftoevent hand2B.
requirements
domain
excessively
Tother_RAT services ofdifficult
high. the
indicatesis current
adopted the when
inter-RAT
over
020303
Inter
Coverage Type -115~-25 -115~-25
measurement
One
the UE of the
again totothe
necessary setcell the used
conditions
of currently Frequency
services;
CS domain
handover theservices
event threshold;
2F are indicates
included. that
frequency
can
used be metdecision
frequency. separately.
only when That of When
thethis
is, both of
quality Hard
the
As
Cell frequency
for the
Individual impact quality
on
Offset network
(CIO) the cell is
indicates
the Qos-based
used
parameter frequency
is usuallyand the isset coverage-
lower lower thanthanis Handover
Threshold
restored,
performance, andof used
thus frequency
this parameter quality
the
based
this
the offset
start inter-RAT
threshold of
threshold the inter-RAT
(Eventmeasurements
for 2Bevent can cell;beor
2F WRFD- Based on Interval
for
the triggering
usually
larger setthe inter-frequency
lower than
parameter, thethe triggering
easier
H represents
exist,
triggered
equal refer
to the only the
tothreshold
this
when hysteresis.
parameter.
both of conditions
event
measurement
threshold
the triggering
Hysteresis ofcan event
ofwithevent
reduce
measurement
2F, or
3A.
wrong isWhenset 2D. the
020302 Coverage Type -24~0 -24~0
As
are for
met.) the impact on network
quantity
equally
frequency toofcaused
Ec/No
the
quality foracceptable
threshold
is PSof domain
event for2D. Inter-RAT
decisions
performance:
After handover, by signal
even if the inter- jitters.
non-HSPA
For
the combined
UE, thesignalservices.
services,
handover may the occur
When
frequency the UE moves
measurement quality to ofisthe
the cellcellif at
triggered
Handover
For
the PS
parameter
value domainof this non-HSPA
configuration
parameter for services,
the
is setCS WRFD- Based on Interval
the current
border,
again, itandis very frequency
there is a is
difficult topoor,
intra- hand over Inter
ifdomain
the value
excessively services of [Inter-frequency
high. is adopted when 020303 Coverage Type -24~0 -24~0
namely,
frequency
the UE again this parameter
neighboring
to mode]
the cellis is
cell
ofsetunder
in thethe
currently Frequency
measure
CS domain report services are can included. to
specified
moving
used frequency.threshold,
direction, That you
CPCICH is, this infer
Ec/No Hard
EVENT_TRIGGER,
As for the impact on this
network parameter
that
varies thefaster
parameter current is than frequency
usually RSCP set lower and cannotthe
than Handover
is used to set
performance, the measurement
meet
quality
the the
start coverage
ofthreshold
the current related
for cell
event should 2F orbe WRFD- Based on Interval
control
the of
larger the of event 2B.
parameter, One of the
the easier
requirements
evaluated
equal to the according
thresholdthe currenttoofCPCICH event 2D. 020302 Inter
Coverage Type -115~-25 -115~-25
necessary
the triggering conditions
of event can
3A. be
When met the
services;
Ec/No. When the event there 2F is no indicates
intra- that Frequency
only when quality
frequency the quality is of the used
acceptable for Inter-RAT
the frequency
frequency quality ofcell
neighboring theincell theis Hard
frequency
the UE, the ishandover
lower than may thisoccur if Handover
restored,
direction, and CPCICH thus this RSCP parameter
varies is Handover
threshold
the value (Event 2B can be is set
usually
faster than setoflower this parameter
Ec/Nothan and the triggering quality
WRFD- Based on
Based on
Interval
triggered
excessively only high.when both conditions 020303 Coverage Type -115~-25 -115~-25
threshold
should be of event 2F,according
evaluated or is set to DL QoS
are met.)
equally
CPCICHtoRSCP. the threshold If the measurement of event 2D. WRFD- Inter-RAT CPICH_EC/N
After handover, even if the inter-
For combined
quantity is not services,
properly selected, the the 020304 Handover O,
frequency measurement is triggered
parameter
handover may configuration
not be performed for the CS WRFD- Based on Enumerati CPICH_EC/NO, CPICH_RSC
again, it is very difficult to hand over Inter
domain
timely, thus services resulting is adopted in call drops. when 020309 DL QoS on Type CPICH_RSCP P
the UE again to the cell of currently Frequency
CS domain services are included.
used frequency. That is, this Hard
As for the impact on network
parameter is usually set lower than Handover
performance,
the start threshold for event 2F or WRFD- Based on Interval
the larger the parameter, the easier
equal to the threshold of event 2D. 020302 Coverage Type -24~0 -24~0
the triggering of event 3A. When the
frequency quality is acceptable for Inter-RAT
the UE, the handover may occur if Handover
the value of this parameter is set WRFD- Based on Interval
excessively high. 020303 Coverage Type -24~0 -24~0
threshold (Event 2B can be
usually set lower than the triggering
triggered only when both conditions
threshold of event 2F, or is set
are met.)
equally to the threshold of event 2D.
After handover, even if the inter-
For combined services, the
frequency measurement is triggered
parameter configuration for the CS
again, it is very difficult to hand over Inter
domain services is adopted when
the UE again to the cell of currently Frequency
CS domain services are included.
used frequency. That is, this Hard
As for the impact on network
parameter is usually set lower than Handover
performance,
the start threshold for event 2F or WRFD- Based on Interval
the larger the parameter, the easier
equal to the threshold of event 2D. 020302 Coverage Type -115~-25 -115~-25
the triggering of event 3A. When the
frequency quality is acceptable for Inter-RAT
This parameter specifies whether
the UE, the handover may occur if Handover
the Mac-ehs entity is applied. Mac-
the value of this parameter is set WRFD- Based on Interval
ehs is enhanced Mac-hs and is
excessively high. 020303 Coverage Type -115~-25 -115~-25
used for DL L2 enhancement
function. If the DL L2 enhancement
is configured, the Mac-ehs entity will CPC - HS-
be applied, otherwise the Mac-ehs WRFD- SCCH less Enumerati NOTUSED, NOTUSED,
entity will not be applied. 010687 operation on Type USED USED
License
MRFD- Managemen String 1~32
User name of the FTP server 210403 t Type None characters
Enumerati CELL/S,
Rate unit None None on Type CELL/S, KBIT/S KBIT/S
ATM
Transmissio
n
WRFD- Introduction Interval
IP
VCI of the AAL2 path out BSC6900 050301 Package Type 32~65535 32~65535
If the parameter is set to Disable, Transmissio
the added IP path is not configured n DISABLE(Disabl
with the VLAN ID. If the parameter Introduction e),
is set to Enable, the added IP path WRFD- on Iub Enumerati ENABLE(Enable DISABLE,
is configured with the VLAN ID. 050402 Interface on Type ) ENABLE
Interval
VLAN ID of first Local IP address None None Type 2~4094 2~4094
Faulty
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
24V voltage alarm switch 210304 t on Type OPEN(Open) OPEN
Faulty
Upper limit for triggering a 24 V MRFD- Managemen String 1~9
voltage sensor alarm 210304 t Type None characters
Faulty
Lower limit for triggering a 24 V MRFD- Managemen String 1~9
voltage sensor alarm 210304 t Type None characters
Faulty
MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
48V voltage alarm switch 210304 t on Type OPEN(Open) OPEN
Faulty
Upper limit for triggering a 48V MRFD- Managemen String 1~9
voltage sensor alarm 210304 t Type None characters
Faulty
Upper limit for triggering a 48V MRFD- Managemen String 1~9
voltage sensor alarm 210304 t Type None characters
Interval
cross connection index None None Type 0~1399 0~1399
ATM
Transmissio
n
WRFD- Introduction Interval
VPI of the AAL2 path out BSC6900 050301 Package Type 0~4095 0~4095
Meaning: Indicates whether the
This switch defines whether a video
videophone (VP) service is limited in
phone is barred in a cell. If a video
a cell. When the indicator is Inter RNC
phone is allowed in a confidential Video
"TRUE", it indicates that the VP WRFD- Soft Enumerati TRUE,
zone such as a military exclusive Telephony
service is limited in the cell. 020203 Handover on Type TRUE, FALSE FALSE
zone, the phone can be used for Fallback to
shoot in the confidential zone. Speech
When the parameter is set to YES,
Therefore, the operator can reject (AMR) for
the QOS control algorithm is used
video phone services in the cell by WRFD- Inter-RAT Enumerati TRUE,
for VP services. When the Inter
enabling the switch. 020307 HO on Type TRUE, FALSE FALSE
parameter is set to NO, the QOS Frequency
control algorithm is not used for VP Hard
services.The QOS action of VP Handover
Threshold of VP call drop ratio per
services only includes inter WRFD- Based on Enumerati
CPUS to report KPI alarm.In a 3.4/6.8/13.6
frequency handover. 020304 DL QoS on Type NO, YES NO, YES
checking period, if the ratio is higher /27.2 kbit/s
The minimum number of VP RAB
than this threshold and the number RRC
establish request per CPUS to
of VP call release is higher than the Connection
report KPI alarm. In a checking
related threshold, the KPI alarm of WRFD- and RAB Interval
period,if the number of VP RAB 3.4/6.8/13.6
VP call drop ratio is reported. 010510 Assignment Type 0~100 0~100
establish request is higher than the /27.2 kbit/s
threshold and the VP RAB setup RRC
Threshold of VP RAB setup
successful ratio is lower than this Connection
successful ratio per CPUS to report
threshold,the KPI alarm of VP RAB WRFD- and RAB Interval
KPI alarm. In a checking period,if 3.4/6.8/13.6
setup ratio is reported. 010510 Assignment Type 0~65534 0~65534
the ratio is lower than this threshold /27.2 kbit/s
and the number of VP RAB RRC
The minimum number of VP call
establish request is higher than the Connection
release per CPUS to report KPI
related threshold,the KPI alarm of WRFD- and RAB Interval
alarm.In a checking period, if the 3.4/6.8/13.6
VP RAB setup ratio is reported. 010510 Assignment Type 0~100 0~100
number of VP call release is higher /27.2 kbit/s
than the related threshold and the RRC
VP call drop ratio is higher than this Connection
threshold, the KPI alarm of VP call WRFD- and RAB Interval
drop ratio is reported. 010510 Assignment Type 0~65534 0~65534
general
is triggered, quality andof the active
whenset.
general quality ofstops
the active theis
set
When
next this parameter
measurement is
report setisto 0, the
the measurement of the best cell
general
received. quality of the active set
If norelative
measurement is
report AMR/WB-
and the SHO threshold
the
is quality of
received whenthe bestthe cellAMRC
UL in the AMR
depends on only the best cell in the
active
timer set. Foryou details about this the
activeexpires,
set. When the canparameter
infer that Speech
parameter,
measured refer remains
value to the subsection
in the Rates
equals 1, it can be regarded as the
of
same frequency
statesignalasquality estimation
thatstrength
before the in Control
equivalent when
the section
previous of inter-frequency
maximumUL ratioAMRC mode of down
combination WRFD- Inter-RAT
measurement
adjustment. The in 3GPP TSAMRC25.331.
links of all cells inprevious
the active set is 020701 Handover
This
mode parameter
adjustment is is
usednot for all event-
effective, WRFD- Based on Interval
implemented.
triggered
and another inter-frequency
adjustment is required. 020309 DL QoS Type 20~64000 20~64000
As for the impact on network
measurements, including those
Weight used for computing
performance:
triggered by events 2D, 2F, 2B and
frequency
The larger general the value quality.
of the Faulty
2C. The parameter, however, is not
The
parameterlarger is, thethe valuehigherof thisthresholds MRFD- Managemen Enumerati CLOSE(Close), CLOSE,
used for periodical inter-frequency
parameter,
for
Water triggering
sensor the higher
events
alarm 1Athe
switch and estimated
1B are 210304 t on Type OPEN(Open) OPEN
measurements. The larger the value
general
obtainedquality under of thethe current
same condition,
of this parameter,
Whether toinlimit the the higher the
operation
frequency
and the more the same
difficult it condition,
is for the cell
estimated
weekday ofquality
the of the current
operator. If the Security NOLIMIT(No
and
to join thethemoreactive difficult
set, andthe triggering
the easier
frequency
weekday in the to
needs samebe condition,
limited, see MRFD- Managemen Enumerati Limit), NOLIMIT,
of
it istheforinter-RAT
the cell tohandover;leave the active Intra RNC
and
the the more difficult
description of to trigger inter-
"Week". 210305 t on Type LIMIT(Limit) LIMIT
Reversely,
set. The smaller the smallerthe value the of value
the of Softer
frequency handover. The smaller
this parameter,
parameter is, the the loweritthe
easier is for the WRFD- Handover
the value of this parameter, the
estimated
cell to join general
the active quality
set, and of the the 020202 Inter RNC
lower the estimated quality of the
current
more difficultfrequency, it is for andthethe celleasier
to leave WRFD- Soft Interval
current frequency, and the easier to Inter
the triggering
active set.of the inter-RAT 020203 Handover Type 0~20 0~2, step:0.1
trigger inter-frequency handover. Frequency
handover. When the value is set to
Generally, this parameter is set to 0 Hard
0, the general quality of an active
or 1. Whether the handover is easy Handover
set is the quality of the best cell in
or difficult to trigger is not decided WRFD- Based on Interval
the set. This parameter is used for
by the way of setting this parameter. 020302 Coverage Type 0~20 0~2, step:0.1
event 3A evaluation.
Whether to trigger an active/standby
To set this parameter, refer to the Inter-RAT
port switchover. If this parameter is
method for setting the intra- Handover
set
Workingto YES, an active/standby port
frequencymode. handover E1: The E1 system
weighting factor WRFD- Based on Interval
switchover
is recommended by the IUT-T. fault
is triggered when a E1
"Weight". 020303 Coverage Type 0~20 0~2, step:0.1
is detected
carries signals on the activeMbit/s.
at 2.048 port. If this
parameter
G.703 defines is set thetoelectrical
NO, an
active/standby
specification and G.704 port switchover
definesisthe not IP Re-route
triggered when
frame format for E1 a fault is detected on WRFD- Based on Enumerati NO(NO),
the active port.
telecommunication lines. The E1 050421 BFD/ARP on Type YES(YES) NO, YES
ATM
system is used in Europe and Transmissio
China. SUN(Sunday),
n
T1: The T1window systemsize. is recommended MON(Monday),
Receiving It controls WRFD- Introduction Interval
by TUE(Tuesday),
thethe ANSI speed
transmit and widely of theused peer. in the 050301 Package Type 1~32767 1~32767
North America. T1 carries signals at WED(Wednesda
1.544 Mbit/s. y), SUN, MON,
E1_BA: A circuit that uses two wires Security THU(Thursday), TUE, WED,
to transmit the same but contra- MRFD- Managemen Enumerati FRI(Friday), THU, FRI,
IP
You can select
directional signals. multiple weekdays.
The 120-ohm E1 210305 t on Type SAT(Saturday) SAT
Transmissio
line
Working and 100-ohm
mode of the T1 line
M3UA arelinktypical
set, n M3UA_ASP(M3
balanced
including M3UA_ASPcircuits. The and balanced Introduction UA_ASP),
circuit
M3UA_IPSP. must use Forthe balanced
details aboutcable, the WRFD- on Iu Enumerati M3UA_IPSP(M3 M3UA_ASP,
that
ASPis, andtwisted-pair
IPSP, seecable consisting
the RFC4666. 050409 Interface on Type UA_IPSP) M3UA_IPSP
of two wires.
Configuratio Active(Format
E1_UNBA: A circuit that uses one
n active area),
transmission signal cable and one
flag of the work area to be MRFD- Managemen Enumerati Standby(Format Active,
common grounding cable to transmit
formatted. 210301 t on Type standby area) Standby
signals. The 75-ohm E1 line is a E1_UNBA(E1
typical unbalanced circuit. The Unbalance),
unbalanced circuit must use the ATM over E1_BA(E1 E1_UNBA,
unbalanced cable, that is, coaxial WRFD- E1T1 on Iub Enumerati Balance), E1_BA, T1,
cable. 05030101 Interface on Type T1(T1), E1(E1) E1
GMT+0430(GM GMT+0430(G
T+04:30), MT+04:30),
Optical interface type. Value UNI GMT+0500(GM GMT+0500(G
indicates that the interface is a user T+05:00), MT+05:00),
network interface. Value NNI GMT+0530(GM GMT+0530(G
indicates that the interface is a T+05:30), MT+05:30),
network-network interface. GMT+0545(GM GMT+0545(G
Generally, this parameter is set to T+05:45), MT+05:45),
UNI. This parameter is set to NNI GMT+0600(GM GMT+0600(G
when the BSC is connected to the Enumerati T+06:00), MT+06:00),
core network. None None on Type GMT+0630(GM
UNI, NNI GMT+0630(G
UNI, NNI
This parameter specifies the X T+06:30), MT+06:30),
offset for connected mode. For a GMT+0700(GM GMT+0700(G
PTM service in a cell, X UEs that T+07:00), MT+07:00),
Interval GMT+0800(GM GMT+0800(G
receive this service need to retain in
Wait to restore time None None Type 30~60000
T+08:00), 30~60000
MT+08:00),
connected mode, so as to reduce
triggering of counting on the Uu GMT+0845(GM GMT+0845(G
Difference between CPU usage of T+08:45), MT+08:45),
interface during recounting. The
the current and target XPUs. If the GMT+0900(GM GMT+0900(G
value of X = "NCountingThd" + " WRFD- MBMS Interval
difference between CPU usage of T+09:00), MT+09:00),
XOffset". 010660 Phase 2 Type 1~5 1~5
the current and target XPUs is GMT+0930(GM GMT+0930(G
greater than the value of this T+09:30), MT+09:30),
For the PS BE
parameter, loadservice
sharingatisa triggered
rate of 0
GMT+1000(GM GMT+1000(G
kbit/s,
between thisthe
parameter is used
current and target for the WRFD- Flow Interval T+10:00), MT+10:00),
rate
XPUs. upsizing for DCCC triggered by 040100 Control Type 1~100 1~100
GMT+1030(GM GMT+1030(G
event 4A. Unsuccessful rate
Load sharing threshold of the T+10:30), MT+10:30),
upsizing indicates that the resources
current XPU. When the CPU usage GMT+1100(GM GMT+1100(G
are insufficient in the cell. The
of an XPU exceeds the threshold, WRFD- Flow Interval T+11:00), MT+11:00),
service may run at a rate of 0 kbit/s
load sharing is configurable. 040100 Control Type GMT+1130(GM
1~100 GMT+1130(G
1~100
for a long time. If the timer is Dynamic
T+11:30), MT+11:30),
started, the 0 kbit/s service of the Channel
GMT+1200(GM GMT+1200(G
UE is released after the timer Configuratio
T+12:00), MT+12:00),
expires. If the length is set to 0, the WRFD- n Control Interval
GMT+1245(GM GMT+1245(G
timer is not started. 021101 (DCCC) Type 0~65535 0~65535
T+12:45), MT+12:45),
Configuratio GMT+1300(GM GMT+1300(G
n T+13:00), MT+13:00),
MRFD- Managemen Enumerati GMT+1400(GM GMT+1400(G
Time zone 210301 t on Type T+14:00) MT+14:00)
Unit Default Value
Recommended Value
Impact
Parameter Relationship
Service
Access
Interrupted After
Interruption
Modification
Interruption
Scope Duration(Min)
N (No
impact on
Read & the UE in Not Not
None None 1 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None AAL2 path None Write idle mode) involved involved
N (No
impact on
The ASCs
Read & the UE in Not Not
are
s None None RNC None Write idle mode) involved involved
configured
through N (Impact
"ADD on the UE
The ASCs
UPRACH Read & in idle Not Not
are
None ASC0 ASC0 Cell ASC". Write mode) involved involved
configured
through N (Impact
"ADD on the UE
The ASCs
UPRACH Read & in idle Not Not
are
None ASC0 ASC0 Cell ASC". Write mode) involved involved
configured
through N (Impact
"ADD on the UE
The ASCs
UPRACH Read & in idle Not Not
are
None ASC0 ASC0 Cell ASC". Write mode) involved involved
configured
through N (Impact
"ADD on the UE
The ASCs
UPRACH Read & in idle Not Not
are
None ASC0 ASC0 Cell ASC". Write mode) involved involved
configured
through N (Impact
"ADD on the UE
The ASCs
UPRACH Read & in idle Not Not
are
None ASC0 ASC0 Cell ASC". Write mode) involved involved
configured
through N (Impact
"ADD on the UE
The ASCs
UPRACH Read & in idle Not Not
are
None ASC0 ASC0 Cell ASC". Write mode) involved involved
configured
through N (Impact
"ADD on the UE
UPRACH Read & in idle Not Not
None ASC0 ASC0 Cell ASC". Write mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 80 80 Board None Write idle mode) involved involved
N (No
impact on
When Read & the UE in Not Not
per cent 80 75 Board "Restrictio
None Write idle mode) involved involved
nType" in
"ADD N (No
UCELLDS impact on
ACMANU Read & the UE in Not Not
None Enable Enable PPP link When
None
ALPARA" Write idle mode) involved involved
Only when
"DsacAuto
is
"Restrictio N (No
Switch"is
Restriction
nType" in impact on
set
Fixed,to
"ADD Read & the UE in Not Not
ON,the
AcRestrict
ms None 50 RNC UCELLDS
None Write idle mode) involved involved
parameter
ion should
ACMANU
need
be N (No
ALPARA"
configurin
configured impact on
is
g;else,nee
.Restriction
When Read & the UE in Not Not
s None AC0- 100 RNC When
d not. Write idle mode) involved involved
"Restrictio
Fixed, this
1&AC1- "DsacAuto
nType"
parameterin N (Impact
1&AC2- Switch"is
"ADD
should be on the UE
1&AC3- set to
UCELLDS
configured Read & in idle Not Not
1&AC4- ON,the
None None None Cell ACMANU
.Only when Write mode) involved involved
1&AC5- parameter
ALPARA"
1&AC6- "Restrictio
need N (No
is
1&AC7- nType" in
configurin impact on
Restriction
1&AC8- "ADD
g;else,nee Read & the UE in Not Not
Flexible,
None None 1&AC9-1 RNC UCELLDS
d not. Write idle mode) involved involved
AcRestrict
ACMANU
ion should N (Impact
ALPARA"
not be on the UE
is
configured Read & in idle Not Not
Restriction
None None None Cell . Write mode) involved involved
Fixed, this
parameter N (Impact
should be on the UE
configured Read & in idle Not Not
s None None Cell When
. Write mode) involved involved
"DsacAuto
N (No
Switch"is
impact on
set to
Read & the UE in Not Not
ON,the
s None 30 RNC None Write idle mode) involved involved
parameter
need N (No
configurin impact on
g;else,nee Read & the UE in Not Not
s None 10 RNC d not. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent None 2 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None OFF RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 70 70 Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 70 65 Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None ON ON Board This
None Write idle mode) involved involved
parameter
N (No
is valid
impact on
when the
Read & the UE in Not Not
"CellLocCf
None None None RNC None Write idle mode) involved involved
gType" is
set to N (No
BOTH or impact on
CELL_AN Read & the UE in Not Not
None ACTIVE ACTIVE Cell TENNA. Write idle mode) involved involved
N (No
impact on
NODELIVE Read & the UE in Not Not
None None RY RNC None Write idle mode) involved involved
N (No
impact on
UE_BASE Read & the UE in Not Not
None None D RNC None Write idle mode) involved involved
Channeliz
ed optical Read & Not Not Not
None None None port None Write involved involved involved
The
When the services
ATM Read & Not Not Not
value of are
None None None logical port When
None the Write involved involved involved
"CARRYT interrupted
value of
" is set to until the
"CARRYT
IMA, this SAAL link
" in "ADD
parameter Read & is working
AAL2PAT
None None None SAAL link is valid. Write Y SAAL link normally.
H" is set
to IMA,
this
parameter Read & Less than
None None None AAL2 path is valid. Write Y AAL2 path 5 minutes
N (No
impact on
Read & the UE in Not Not
None None None IPoA PVC None Write idle mode) involved involved
The
When the services
Read & Not Not Not
value of are
None None None None When
None the Write involved involved involved
"CARRYT interrupted
value of
" is set to until the
"CARRYT
UNI, this SAAL link
" in "ADD
parameter Read & is working
AAL2PAT
None None None SAAL link is valid. Write Y SAAL link normally.
H" is set
to UNI,
this
parameter Read & Less than
None None None AAL2 path is valid. Write Y AAL2 path 5 minutes
When the N (No
value of impact on
"CARRYT Read & the UE in Not Not
None None None IPoA PVC "None
is set to Write idle mode) involved involved
IMA, UNI,
FRAATM, The
NCOPT, services
ATM Read & Not Not Not
or are
None None None logical port None Write involved involved involved
ATMLOGI interrupted
When
CPORT, the until the
If the value
value
this of SAAL link
is not
"CARRYT
parameter Read & is working
consistent,
None None None SAAL link "isisvalid.
set to Write Y SAAL link normally.
The
will
IMA, UNI,
services
interrupt
FRAATM, The
will be
service
NCOPT, services
Read & interrupted
until it is
or are
None None None IPoA PVC None Write Y BSC6900 ifconsistent.
the
ATMLOGI interrupted
setting of
CPORT, until the
this
this SAAL link
parameter
parameter Read & is working
is
None None None SAAL link is valid. Write Y SAAL link normally.
inconsiste
When the
nt with the
value of The
setting at
"CARRYT services
When the Read & the peer
" is set to are
None None None IPoA PVC value
None of Write Y BSC6900 end.
ATMLOGI interrupted
"CARRYT
CPORT, until the
" in "ADD
this SAAL link
AAL2PAT
parameter Read & is working
H" is set
None None None SAAL link is valid. Write Y SAAL link normally.
to ATM
LGCPOR
T, this
parameter Read & Less than
None None None AAL2 path is valid. Write Y AAL2 path 5 minutes
N (No
impact on
Read & the UE in Not Not
None None None IPoA PVC None Write idle mode) involved involved
N (No
impact on
Subsyste Read & the UE in Not Not
None None None m None Write idle mode) involved involved
N (No
impact on
Subsyste Read & the UE in Not Not
None None None m None
Before Write idle mode) involved involved
configurin N (No
g this impact on
IP logical parameter Read & the UE in Not Not
byte 4500 4500 port ,None
you need Write idle mode) involved involved
to
configure N (No
the impact on
informatio Read & the UE in Not Not
per cent 85 85 Board None
n about Write idle mode) involved involved
the N (No
common impact on
traffic Read & the UE in Not Not
per cent 85 80 Board logical
None Write idle mode) involved involved
channel
by running
"ADD
UCTCH". Read & Not Not Not
None None None Cell None
At the Write involved involved involved
same N (No
time, you impact on
need to Read & the UE in Not Not
per cent 70 75 Board set
None the Write idle mode) involved involved
CBS
N (No
schedulin
impact on
g
Read & the UE in Not Not
parameter
per cent 70 70 Board None Write idle mode) involved involved
of the cell
by running N (No
"ADD impact on
UCELLCB Read & the UE in Not Not
None None None Cell SDRX". Write idle mode) involved involved
This N (No
parameter impact on
is valid Read & the UE in Not Not
None D64 D64 NodeB None
when the Write idle mode) involved involved
"DlRateUp N (No
AdjLevel" impact on
in "SET Read & the UE in Not Not
per cent 0 0 Cell UDCCC"
None Write idle mode) involved involved
is set to
N (No
3_Rates,
impact on
or when
Read & the UE in Not Not
"DlRateDn
None D1 D1 Cell None Write idle mode) involved involved
AdjLevel"
in "SET N (No
UDCCC" impact on
HAND_AP is set to Read & the UE in Not Not
None None POINT RNC 3_Rates. Write idle mode) involved involved
POINT,
and the
following
relationshi
p must be
The
satisfied:
following
"DlDcccR
relationshi
ateThd" N (No
p must be
<= impact on
satisfied:
The
"DlMidRat Read & the UE in Not Not
"UlModeC
kbit/s None D128 RNC following
eThd". Write idle mode) involved involved
hangeTim
relationshi
erLen" <= N (No
p must be
"DlModeC impact on
satisfied:
hangeTim Read & the UE in Not Not
"UlModeC
ms None 3000 RNC This
erLen". Write idle mode) involved involved
hangeTim
parameter
erLen" <= N (No
is valid
"DlModeC impact on
only when
hangeTim Read & the UE in Not Not
"AFSetObj
ms None 3000 RNC erLen". Write idle mode) involved involved
" is set to
GOLD, N (No
SILVER, impact on
or Read & the UE in Not Not
None None 100 RNC COPPER. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 5 RNC None Write idle mode) involved involved
N (No
The value impact on
of this Read & the UE in Not Not
None 3 3 Cell None
parameter Write idle mode) involved involved
must N (No
satisfy the impact on
following Read & the UE in Not Not
None 3 3 Cell relationshi
None Write idle mode) involved involved
p:
N (No
"DlOlcTrig
impact on
Thd" >=
The value Read & the UE in Not Not
"DlOlcRel
of this
None None D3 RNC None Write idle mode) involved involved
Thd";
parameter
"DlOlcRel
must N (No
Thd"
satisfy>=the impact on
"DlLdrRel
following Read & the UE in Not Not
per cent 85 85 Cell Thd".
relationshi Write idle mode) involved involved
p: N (No
"DlOlcTrig impact on
Thd" >= Read & the UE in Not Not
None 0 0 Cell "DlOlcRel
None Write idle mode) involved involved
Thd";
N (No
"DlOlcTrig
impact on
Thd" >
Read & the UE in Not Not
"DlLdrTrig
None None 100 RNC None Write idle mode) involved involved
Thd";
"DlOlcTrig N (No
Thd" >= impact on
"DlCellTot Read & the UE in Not Not
per cent 95 95 Cell alThd". Write idle mode) involved involved
onAMRTh
d" >
"DlOtherT
hd";
"DlOtherT
The value
hd" >=
of this
"DlLdrTrig
parameter
Thd"(See N (No
must
"ADD impact on
satisfy the
UCELLLD Read & the UE in Not Not
following
per cent 75 75 Cell M") Write idle mode) involved involved
relationshi
p: N (No
"DLOVSF impact on
SF">"DLC Read & the UE in Not Not
None None None Cell ODENO". Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 1 1 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 1 1 NodeB None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 1 1 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
Valid
None 1 1 NodeB None Write idle mode) involved involved
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
Valid
None None NO RNC YES. Write idle mode) involved involved
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
Valid
None None NO RNC YES. Write idle mode) involved involved
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
None None NO RNC YES. Write idle mode) involved involved
N (No
This
impact on
parameter
Read & the UE in Not Not
is valid
s 20 20 Cell None Write idle mode) involved involved
when the
"VPQosPe N (No
rform" is impact on
set to Read & the UE in Not Not
Valid
None None NO RNC YES. Write idle mode) involved involved
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
None None NO RNC YES. Write idle mode) involved involved
Valid
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
Valid
None None NO RNC YES. Write idle mode) involved involved
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
None None NO RNC YES. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None OFF RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 3_Rates RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 3_Rates RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
dB 5 5 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 0 RNC None Write idle mode) involved involved
N (No
This
impact on
parameter
Read & the UE in Not Not
is valid
None D64 D64 Cell This
None Write idle mode) involved involved
only when
parameter
"AFSetObj N (No
is valid
" is set to impact on
only when
NOPRIOR Read & the UE in Not Not
"AFSetObj
None None 10 RNC ITY. Write idle mode) involved involved
" is set to
GOLD, N (No
SILVER, impact on
or Read & the UE in Not Not
None None 100 RNC COPPER. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
kbit/s D64 D64 RNC None Write idle mode) involved involved
relationshi
p must be
satisfied:
The
"DlThdE1"
following
<=
relationshi
"DlThdE2"
p must be
<
satisfied:
The
"DlThdF2" N (No
"DlThdE1"
following
<= impact on
<=
relationshi
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 50 RNC p
. must be Write idle mode) involved involved
<
satisfied:
The
"DlThdF2" N (No
"DlThdE1"
following
<= impact on
<=
relationshi
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 50 RNC p
. must be Write idle mode) involved involved
<
satisfied:
The
"DlThdF2" N (No
"DlThdE1"
following
<= impact on
<=
relationshi
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 50 RNC p
. must be Write idle mode) involved involved
<
satisfied:
The
"DlThdF2" N (No
"DlThdE1"
following
<= impact on
<=
relationshi
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 50 RNC p
. must be Write idle mode) involved involved
<
satisfied:
The
"DlThdF2" N (No
"DlThdE1"
following
<= impact on
<=
relationshi
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 120 RNC p
. must be Write idle mode) involved involved
<
satisfied:
The
"DlThdF2" N (No
"DlThdE1"
following
<= impact on
<=
relationshi
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 120 RNC p
. must be Write idle mode) involved involved
<
satisfied:
"DlThdF2" N (No
"DlThdE1"
<= impact on
<=
"DlThdF1" Read & the UE in Not Not
"DlThdE2"
dB None 120 RNC . Write idle mode) involved involved
<
"DlThdF2" N (No
<= impact on
"DlThdF1" Read & the UE in Not Not
dB None 120 RNC . Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 80 80 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms 64 64 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None IMA group None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None RNC None Write idle mode) involved involved
When the
N (No
value of
impact on
"SPDF" in
Read & the UE in Not Not
"ADD
None OPEN None None None Write idle mode) involved involved
N7DPC" is
set to
DNF, this
This
parameter Read & Less than
parameter
None None None SCCP is valid. Write Y BSC6900 10 minutes
is valid
when N (No
"Dtxvalid" impact on
This
is set to Read & the UE in Not Not
parameter
None None None RNC ON. Write idle mode) involved involved
is valid
when N (No
"Dtxvalid" impact on
is set to Read & the UE in Not Not
None None None RNC ON. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None RNC None Write idle mode) involved involved
This index
can Read & Not Not Not
None None None Board None
correspon Write involved involved involved
d with any
threshold
Ethernet (maximum Read & Not Not Not
value Interrupt
None None None port None of Write involved involved involved
80) in the the service
six until
queues. negotiate
The Read & successfull
None 0 0 PPP link None
following Write Y BSC6900 y again.
condition N (No
must be impact on
met: Read & the UE in Not Not
None 0 0 MP group threshold
None Write idle mode) involved involved
x 64 x
N (No
1024 x
impact on
logical
ATM Read & the UE in Not Not
port
None 1 1 logical port None Write idle mode) involved involved
bandwidth
< N (No
42949672 impact on
IP logical 95(0xFFF Read & the UE in Not Not
None 0 0 port FFFFF). Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
M3UA_MA M3UA_MA
STER_MO STER_MO Read & Not Not Not
None D D BSC6900 None Write involved involved involved
N (No
impact on
Read & the UE in Not Not
None B1111 B1111 SCCP None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None B1111 B1111 SCCP None Write idle mode) involved involved
N (No
impact on
Read & the UE in Less than
None None None PVC None Write idle mode) BSC6900 5 minutes
This
paramter Read & Not Not Not
None None None Cell is valid
None Write involved involved involved
only when
N (No
"STTDSup
impact on
Ind" of
Read & the UE in Not Not
"ADD
dB -7 -7 Cell None Write idle mode) involved involved
UCELLSE
TUP" is N (No
set to impact on
STTD_Su Read & the UE in Not Not
None 0 0 Cell pported. Write idle mode) involved involved
N (No
impact on
IP logical Read & the UE in Not Not
kbit/s None None port None Write idle mode) involved involved
This
parameter Read & Not Not Not
None None None None None
is required Write involved involved involved
when the N (No
"RlcMode" impact on
parameter Read & the UE in Not Not
ms 10000 10000 AAL2 path is set to
None Write idle mode) involved involved
AM and
N (No
the
impact on
"AmRlcCf
Read & the UE in Not Not
gPara"
ms 10000 10000 AAL2 path None Write idle mode) involved involved
parameter
is set to N (No
FLOWCO impact on
NTROL_P Read & the UE in Not Not
ms 1000 1000 RAB ARA. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
s None 60 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None MP group None Write idle mode) involved involved
N (No
When the
impact on
value of
Read & the UE in Not Not
"SAALLN
None None None None None the
When Write idle mode) involved involved
KT" is set
value
to NNI,of N (No
"MsgInd"
this impact on
MPS_NEU MPS_NEU is set to
parameter Read & the UE in Not Not
None TRAL TRAL SAAL link ON, this
is valid. Write idle mode) involved involved
parameter
is valid. N (No
When impact on
"CBSwitch Read & the UE in Not Not
None MCPPP MCPPP MP group None
" is set to Write idle mode) involved involved
ON in N (No
"SET impact on
URNCCB Read & the UE in Not Not
None None None None PARA"
None Write idle mode) involved involved
and the
CBS N (No
license is impact on
valid, the Read & the UE in Not Not
None None None None None
cell Write idle mode) involved involved
broadcast N (No
can be impact on
performed Read & the UE in Not Not
None None OFF RNC in a
None Write idle mode) involved involved
specified
N (No
cell. This
impact on
parameter
Read & the UE in Not Not
specifies
None None OFF RNC None Write idle mode) involved involved
the
content of N (No
broadcast impact on
messages Read & the UE in Not Not
None None None Cell . Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None OFF OFF Cell None Write idle mode) involved involved
MSP
protect Read & Not Not Not
None None None group None Write involved involved involved
The value
of this
parameter
must
N (No
satisfy the
The value impact on
following
of this Read & the UE in Not Not
relationshi
None None ON BSC6900 parameter
None Write idle mode) involved involved
p:
must
"MtchMax N (No
satisfy the
Pwr" >= impact on
following
The value
"MtchRsv Read & the UE in Not Not
relationshi
per cent 60 60 Cell of this
Pwr" Write idle mode) involved involved
p:
parameter
"MtchMax N (No
must fulfill
Sf" >= impact on
the
The value
"MtchRsv Read & the UE in Not Not
following
None 40 40 Cell of
Sf"this Write idle mode) involved involved
condition:
parameter
"MtchMin
must fulfill
Perc0" >=
the
"MtchMin Read & Not Not Not
following
per cent 80 80 Cell Perc15". Write involved involved involved
condition:
"MtchMin
Perc0" >=
"MtchMin Read & Not Not Not
per cent 50 50 Cell Perc15". Write involved involved involved
N (No
The value impact on
of this Read & the UE in Not Not
kbit/s None D16 RNC parameter
None Write idle mode) involved involved
must
N (No
satisfy the
The value impact on
following
of this Read & the UE in Not Not
relationshi
None None 0 RNC parameter
None Write idle mode) involved involved
p:
must
"MtchMax N (No
satisfy the
Pwr" >= impact on
following
"MtchRsv Read & the UE in Not Not
relationshi
per cent 20 20 Cell Pwr". Write idle mode) involved involved
p:
"MtchMax N (No
Sf" >= impact on
"MtchRsv Read & the UE in Not Not
None 16 16 Cell Sf" Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None MET MET None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None MET Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 800 800 SCTP link None Write idle mode) involved involved
configurati
on fails to
meet the
requireme
nt of the
network,
the
If the
services
mode is
will be
not
Read & adversely
consistent,
byte 1696 1696 BSC6900 None Write Y BSC6900 affected.
will
interrupt
service
Ethernet Read & until it is
byte None 1500 port None Write Y BSC6900 consistent.
N (No
impact on
Read & the UE in Not Not
ls 1000 1000 MP group None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ls None None MP group None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
When the
value of
Read & Not Not Not
"SAALLN
None None None None None Write involved involved involved
KT" is set
to NNI, N (No
this impact on
parameter Read & the UE in Not Not
None 100 100 SAAL link is valid. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 3 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 3 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 3 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 1 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None D1 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None D50 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None D1 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None D1 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
The value N (No
of this impact on
parameter Read & the UE in Not Not
None None None None must
None be Write idle mode) involved involved
set to
The value N (No
meet the
of this impact on
following
parameter Read & the UE in Not Not
conditions
None None None None must
None be Write idle mode) involved involved
: Interruptio
set to
"NB01max n until the
meet the
" >= cell is
following
"NB01min Read & activated
conditions
frame 0 0 Cell ". Write Y Cell again.
: Interruptio
"NB01max n until the
" >= cell is
"NB01min Read & activated
frame 0 0 Cell ". Write Y Cell again.
N (No
The
impact on
services
Read & the UE in Not Not
are
None None 20 RNC None Write idle mode) involved involved
interrupted
until the
SCTP link
Read & is working
None 58080 58080 SCTP link None Write Y SCTP link normally.
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 20 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
informatio
n has
been
configured
If the
as not
Downlink
required.
CAC
Note:Inter-
algorithm N (No
freq cell
switch impact on
reselectio
select the Read & the UE in Not Not
n
None None None BSC6900 equivalent
None Write idle mode) involved involved
threshold
user
is set N (No
number
by"ADD impact on
algorithm,t
UCELLSE Read & the UE in Not Not
hen Intra
None None None Cell LRESEL".I
None Write idle mode) involved involved
Frequency
nter-
LDB N (No
frequency
Algorithm impact on
measurem
must be Read & the UE in Not Not
ent control
None None None Cell closed. Write idle mode) involved involved
informatio
n is set by N (No
"MOD impact on
UCELLME Read & the UE in Not Not
None None None Cell AS". Write idle mode) involved involved
N (No
NBM_LDC NBM_LDC impact on
_MATCH_ _MATCH_ Read & the UE in Not Not
None UE_ONLY UE_ONLY Cell None Write idle mode) involved involved
ALGORITH ALGORITH N (No
M_DEPEN M_DEPEN impact on
D_ON_LC D_ON_LC Read & the UE in Not Not
None G PRIORITY
G Cell None Write idle mode) involved involved
2-
N (No
1&PRIORI
impact on
TY3-
Read & the UE in Not Not
1&PRIORI
None None None Cell None Write idle mode) involved involved
TY4-
1&PRIORI N (No
TY5- impact on
1&PRIORI Read & the UE in Not Not
None None TY6-1 RNC None Write idle mode) involved involved
N (No
impact on
ALGORITH Read & the UE in Not Not
None None M_OFF RNC If this
None Write idle mode) involved involved
paramter
N (No
is not
impact on
zero, it is
Read & the UE in Not Not
valid only
None None None RNC None Write idle mode) involved involved
when
"NBscInde N (No
x" in "ADD impact on
UNBSC" Read & the UE in Not Not
None None None Cell is added. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 60 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None Cell This
None Write idle mode) involved involved
paramter
N (No
is valid
impact on
only when
Read & the UE in Not Not
"DynShut
None None None Cell None Write idle mode) involved involved
DownTyp
e" is set to N (No
Condition impact on
alShutDo Read & the UE in Not Not
per cent 20 20 Cell wn. Write idle mode) involved involved
The value
Ethernet of this Read & Not Not Not
byte 56 56 port parameter
None Write involved involved involved
must
N (No
satisfy the
impact on
following
Ethernet Read & the UE in Not Not
relationshi
byte 128 128 port None Write idle mode) involved involved
p:
"PlmnValT
agMax" >
"PlmnValT Read & Not Not Not
None None None RNC agMin". Write involved involved involved
of this
parameter
must
satisfy the
following
relationshi
p:
"PlmnValT
agMax" >
"PlmnValT Read & Not Not Not
None None None RNC agMin". Write involved involved involved
N (No
impact on
IP logical Read & the UE in Not Not
ms 10 10 port None Write idle mode) involved involved
N (No
impact on
IP logical Read & the UE in Not Not
None 30 30 port None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 60 60 Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 60 67 Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 50 50 Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 50 62 Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None ON ON Board None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
MSP
protect Read & Not Not Not
None None None group None Write involved involved involved
N (No
impact on
Read & the UE in Not Not
None None None NodeB None Write idle mode) involved involved
The value
of this
parameter Read & Not Not Not
None None None RNC None
must Write involved involved involved
When the
satisfy the N (No
value of
following impact on
"NODET"
relationshi Read & the UE in Not Not
in "ADD
None None UMTS BSC6900 p:
None Write idle mode) involved Involved
ADJNOD
This
"MaxCAP
E" is set to
parameter
SLowLoad
This
IUPS,
is this
>required
"parameter
Adjacent when the Read & Not Not Not
"MaxCAP
is valid
None None None node is valid.
"UseOfHc Write involved involved involved
SMidLoad
when the
s"
"SERVICE
> N (No
parameter
"SharingO impact on
_HO_BAS
is set to
utCAPSMi Read & the UE in Not Not
ED_ON_R
None None 10 RNC USED
dLoad". but Write idle mode) involved involved
NC_SWIT
not
CH under N (No
required
the impact on
when the
DEDICATE "HoSwitch Read & the UE in Not Not
"UseOfHc
None None D NodeB "None Write idle mode) involved involved
s"
parameter
parameter N (No
is set to
is set to impact on
on
NOT_USE Read & the UE in Not Not
through
dB 0 0 Cell D. Write idle mode) involved involved
HO_TO_G the "SET
SM_SHOU CORRMA N (No
LD_NOT_ LGOWITC impact on
BE_PERF H" Read & the UE in Not Not
None None ORM RAB command. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 3 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
s None 60 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
dB None CS_SHO_-20 RNC None Write idle mode) involved involved
SWITCH:O
N (No
FF,
impact on
HSPA_SH
Read & the UE in Not Not
O_SWITC
dB -24 -24 Cell None Write idle mode) involved involved
H:OFF,
NON_HSP N (No
A_SHO_S impact on
WITCH:OF Read & the UE in Not Not
None None F RNC None Write idle mode) involved involved
N (Impact
This on the UE
parameter Read & in idle Not Not
None 1 1 Cell None
cannot be Write mode) involved involved
set to N (Impact
FACH on the UE
only when Read & in idle Not Not
None 0 0 Cell the
None Write mode) involved involved
"RrcCaus
N (No
e"
impact on
parameter
Read & the UE in Not Not
is set to
None None None Cell None Write idle mode) involved involved
EMERGC
ALLEST N (No
or impact on
MBMSCA Read & the UE in Not Not
None None None RNC LLEST. Write idle mode) involved involved
T314
Read & Not Not Not
should be
s None 3 RNC None Write involved involved involved
set
T3212
greater
needs to N (No
than
be set impact on
T315
T302*N30
when Read & the UE in Not Not
should be
s None D0 RNC 2
"CNDomai Write idle mode) involved involved
set
nId" is set
greater N (No
to
than impact on
CS_DOM
T302*N30 Read & the UE in Not Not
s None D0 RNC AIN;
2 Write idle mode) involved involved
T3212
N (No
does not
impact on
need to be
Read & the UE in Not Not
set when
s None D30 RNC None Write idle mode) involved involved
"CNDomai
nId" is set N (Impact
to on the UE
PS_DOM Read & in idle Not Not
min 10 10 RNC AIN. Write mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms None D600 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms 1200 1200 MTP3 link None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms 1200 1200 MTP3 link None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms 1200 1200 MTP3 link None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms 1200 1200 MTP3 link None Write idle mode) involved involved
N (No
This impact on
parameter Read & the UE in Not Not
per cent None 10 RNC None
is valid Write idle mode) involved involved
when the N (No
OVERLAY impact on
This
_SWITCH Read & the UE in Not Not
parameter
dB -12 -12 Cell is ON.
None Write idle mode) involved involved
is valid
The
when the N (No
OVERLAY
OVERLAY impact on
_SWITCH
_SWITCH Read & the UE in Not Not
is in
dBm -92 -92 Cell is ON.
None Write idle mode) involved involved
"HoSwitch
The
" in "SET N (No
OVERLAY
CORRMA impact on
_SWITCH
LGOSWIT Read & the UE in Not Not
is in
dB -12 -12 Cell CH". Write idle mode) involved involved
"HoSwitch
" in "SET N (No
CORRMA impact on
LGOSWIT Read & the UE in Not Not
dBm -92 -92 Cell CH". Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
dB -12 -12 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
dBm -92 -92 Cell None Write idle mode) involved involved
parameter
is valid
when the
OVERLAY
_SWITCH
is ON.
The
N (No
OVERLAY
impact on
_SWITCH
Read & the UE in Not Not
is in
dBm 16 16 Cell None Write idle mode) involved involved
"HoSwitch
" in "SET N (No
CORRMA impact on
LGOSWIT Read & the UE in Not Not
dBm 16 16 Cell CH". Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
dBm 16 16 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
Configured
impact on
to 1 when
Read & the UE in Not Not
TFsNumbe
None None None RNC None Write idle mode) involved involved
r is 1;
Configured
Configured
to 0 when
to 1 when
TFsNumbe Transport Read & Not Not Not
TFsNumbe
None None r is 2 or 3 channel None Write involved involved involved
r is 1;
Configured
to 0 when
TFsNumbe Read & Not Not Not
None None r is 2. Cell None Write involved involved involved
This
paramter
Transport Read & Not Not Not
is valid
None 1 1 channel None Write involved involved involved
only when
"TFsNumb
er" is set
Transport to D2 or Read & Not Not Not
None 1 1 channel D3. Write involved involved involved
This
Transport Read & Not Not Not
paramter
None 2 2 channel None Write involved involved involved
is valid
only when
"TFsNumb
Transport er" is set Read & Not Not Not
None 2 2 channel to D3. Write involved involved involved
1."TbSizeI
ndex1" <
"TbSizeIn
dex2" <
"TbSizeIn N (No
1."TbSizeI
dex3" < impact on
ndex1" <
"TbSizeIn Read & the UE in Not Not
"TbSizeIn
None None None RNC dex4" Write idle mode) involved involved
dex2" <
"TbSizeIn N (No
1."TbSizeI
dex3" < impact on
ndex1" <
"TbSizeIn Read & the UE in Not Not
"TbSizeIn
None None None RNC dex4" Write idle mode) involved involved
dex2" <
"TbSizeIn N (No
1."TbSizeI
dex3" < impact on
ndex1" <
"TbSizeIn Read & the UE in Not Not
"TbSizeIn
None None None RNC dex4" Write idle mode) involved involved
dex2" <
"TbSizeIn N (No
dex3" < impact on
"TbSizeIn Read & the UE in Not Not
None None None RNC dex4" Write idle mode) involved involved
This
paramter
Ethernet Read & Not Not Not
is valid
s 2 2 port None Write involved involved involved
only when
"Priority(B
LK CELL)"
is set to Read & Not Not Not
s None None Cell NORMAL. Write involved involved involved
This
parameter Read & Less than
ms 10 10 AAL2 path None
is required Write Y AAL2 path 5 minutes
when the
"RlcMode"
Ethernet parameter Read & Not Not Not
None 4 4 port is set to
None Write involved involved involved
AM and
N (No
the
impact on
"AmRlcCf
Read & the UE in Not Not
gPara"
ms 0 0 Cell None Write idle mode) involved involved
parameter
is set to N (No
FLOWCO impact on
NTROL_P Read & the UE in Not Not
ms 5000 5000 RAB ARA. Write idle mode) involved involved
This
parameter
is valid
when
"InterFreq
ReportMo
de" is set N (No
to impact on
EVENT_T Read & the UE in Not Not
ms D0 D0 Cell RIGGER. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms D320 D320 Cell This
None Write idle mode) involved involved
parameter
N (No
is valid
impact on
when
This Read & the UE in Not Not
"InterRatR
ms D1280 D1280 Cell parameter
None Write idle mode) involved involved
eportMod
is valid
e" is set to N (No
when
PERIODI impact on
"InterFreq
CAL_REP Read & the UE in Not Not
ReportMo
ms 0 0 Cell This
ORTING. Write idle mode) involved involved
de" is set
parameter
to N (No
is valid
PERIODI impact on
when
CAL_REP Read & the UE in Not Not
"InterRatR
ms 0 0 Cell ORTING. Write idle mode) involved involved
eportMod
e" is set to N (No
PERIODI
This impact on
CAL_REP
parameter Read & the UE in Not Not
ms 0 0 Cell ORTING.
is required Write idle mode) involved involved
when the N (No
"RlcMode" impact on
This
parameter Read & the UE in Not Not
parameter
ms D240 D240 RAB is set to
None Write idle mode) involved involved
is required
AM and
when the N (No
the
"RlcMode" impact on
"AmRlcCf
parameter Read & the UE in Not Not
gPara"
ms D2560 D2560 RAB is set to
None Write idle mode) involved involved
parameter
AM and
is set to N (No
the
FLOWCO impact on
"AmRlcCf
NTROL_P Read & the UE in Not Not
gPara"
None 2 2 RAB ARA. Write idle mode) involved involved
parameter
is set to N (No
FLOWCO impact on
NTROL_P Read & the UE in Not Not
None 14 14 RAB ARA. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
d None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None None BSC6900 The
None Write idle mode) involved involved
TRMMAP
index is
configured
Read & Not Not Not
by setting
None None None BSC6900 The
None Write involved involved involved
the value
TRMMAP
of "TMI" in N (No
index is
"ADD impact on
configured
Adjacent TRMMAP" Read & the UE in Not Not
by setting
None None None node The
. Write idle mode) involved involved
the value
TRMMAP
of "TMI" in N (No
index is
"ADD impact on
configured
Adjacent TRMMAP" Read & the UE in Not Not
by setting
None None None node . Write idle mode) involved involved
the value
of "TMI" in N (No
"ADD impact on
Adjacent TRMMAP" Read & the UE in Not Not
None None None node . Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 0 None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 0 None BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
ms 12000 12000 MTP3 link None Write idle mode) involved involved
NCP", the
transmissi
on type
cannot be
modified.
4. If the
NodeB is
configured N (No
with the impact on
electrical Read & the UE in Not Not
ms 60000 60000 MTP3 link serial
None Write idle mode) involved involved
number
through
"ADD
NODEBE Read & Not Not Not
None None None BSC6900 None
SN" and Write involved involved involved
the N (No
transmissi impact on
on type is Read & the UE in Not Not
None None None RNC supposed
None Write idle mode) involved involved
to be
N (No
modified
impact on
to ATM
Read & the UE in Not Not
transmissi
None None None RNC None Write idle mode) involved involved
on, the
transmissi
ATM circuit ATM circuit on type
transmissio transmissio cannot be Read & Not Not Not
None n n NodeB modified. Write involved involved involved
N (No
impact on
Read & the UE in Not Not
min None None BSC6900 None Write idle mode) involved involved
M3UA_LO M3UA_LO
ADSHARE ADSHARE Read & Not Not Not
None _MOD _MOD SCCP None Write involved involved involved
N (No
impact on
When the Read & the UE in Not Not
None 1 1 Cell value
None of Write idle mode) involved involved
"NODET"
in "ADD
ADJNOD
Read & Not Not Not
E" is set to
ms 10 10 NodeB None Write involved involved involved
IUB, IUR,
IUCS, or
IUPS, this
Adjacent parameter Read & Not Not Not
None None None node When
is valid.the Write involved involved involved
value of
"ITFT" in
"ADD
When the Read & Not Not Not
TRMMAP"
None None None IP path value
None of Write involved involved involved
is set to
"ITFT" in
IUB, IUR,
"ADD
IUCS, this
TRMMAP"
When the
parameter Read & Not Not Not
is set to
None None None BSC6900 value of
is valid. Write involved involved involved
IUB, IUR
"ITFT" in
or IUCS,
"ADD
this
TRMMAP"
parameter Read & Not Not Not
is set to
None None None BSC6900 is valid. Write involved involved involved
IUB, IUR
or IUCS,
this
parameter Read & Not Not Not
None None None BSC6900 is valid. Write involved involved involved
This
IP logical Read & Not Not Not
paramter
None 2 2 port None Write involved involved involved
is valid
only when N (No
"CellChoic impact on
e" is set to Read & the UE in Not Not
None None None RNC 3GCELL. Write idle mode) involved involved
The
services
Read & Not Not Not
are
None None None BSC6900 None Write involved involved involved
interrupted
until the
The
SCTP link
services
Read & is working
are
None DISABLE DISABLE SCTP link None Write Y SCTP link normally.
interrupted
until the
If the
SCTP link
mode is
Read & is working
not set
None DISABLE DISABLE SCTP link None Write Y SCTP link normally.
back, will
interrupt
service
Read & until it is
None None None BSC6900 None Write Y BSC6900 set back.
If the
mode is
Ethernet Read & Not Not Not
not set
None None None port None Write involved involved involved
back, will
interrupt
If the
service
mode is
Read & until it is
not set
None None None BSC6900 None Write Y BSC6900 set back.
back, will
interrupt
service
Read & until it is
None None None BSC6900 None Write Y BSC6900 set back.
dual
n typestack,
is
the
ATM, the
parameter
is EF;
transimssio
RT_VBR;
n type the
When is
Hybird
interfaceIP,
the
type is Iu- N (No
parameter
CS, impact on
is LQEF.
transmissio When the Read & the UE in Not Not
None None When
n type the
None is BSC6900 value
None of Write idle mode) involved involved
interface
ATM, the "ITFT" in
type is Iur, N (No
parameter "ADD
transmissio impact on
is TRMMAP"
n type is Read & the UE in Not Not
RT_VBR; is set to
per cent 70 ATM or IP, 70 BSC6900 None Write idle mode) involved involved
transimssio IUB or
the
n type is IUR or N (No
parameter
IP, the IUCS, this impact on
is NULL.
parameter parameter Read & the UE in Not Not
None None When
is EF. the BSC6900 When
is valid.the Write idle mode) involved involved
interface value of
N (No
type is Iu- "ITFT" in
impact on
CS, "ADD
Read & the UE in Not Not
transmissio TRMMAP"
None 100 100 BSC6900 None Write idle mode) involved involved
n type is is set to
ATM or IP, IUB or N (No
the IUR, this impact on
parameter parameter Read & the UE in Not Not
None None is NULL. BSC6900 is valid. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 0 0 BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent 70 70 BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None DCH DCH RNC None Write idle mode) involved involved
N (No
impact on
EDCH_TTI EDCH_TTI Read & the UE in Not Not
None _10ms _10ms RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None OPEN None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
V 28 None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
V 20 None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None OPEN None None None Write idle mode) involved involved
N (No
When the impact on
value of Read & the UE in Not Not
V 57 None None None
"CARRYT Write idle mode) involved involved
" in "ADD N (No
AAL2PAT impact on
H" is set Read & the UE in Not Not
V 42 None None to UNI,
None Write idle mode) involved involved
IMA,
FRAATM,
NCOPT,
Read & Not Not Not
or
None None None BSC6900 None Write involved involved involved
ATMLOGI
CPORT,
this
parameter Read & Less than
None None None AAL2 Path is valid. Write Y AAL2 path 5 minutes
N (No
impact on
Read & the UE in Not Not
None 0 0 Cell None Write idle mode) involved involved
Interruptio
n until the
cell is
Read & activated
None 0 0 Cell None Write Y Cell again.
N (No
impact on
Read & the UE in Not Not
None None NO RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent None 40 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 100 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
per cent None 60 RNC None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None None 200 RNC None Write idle mode) involved involved
Valid
when
"AMRQos N (No
Perform" impact on
is set to Read & the UE in Not Not
ms None 3000 RNC YES. Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None OPEN None None None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None NOLIMIT NOLIMIT BSC6900 None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 0 0 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 0 0 Cell None Write idle mode) involved involved
N (No
impact on
Read & the UE in Not Not
None 0 0 Cell None Write idle mode) involved involved