Professional Documents
Culture Documents
Hardness 70 Shore D
Availability: Die Shear strength 31.8N/mm2
Cat No. Description Temp. Price
Lap Shear Strength 1500psi
Duralco 120-1 . . . . 2 oz. Kit . . . . . . . . . 500 °F . . . . . . 99.95
Flexural Strength 1150 psi
Pre-Measured Kits
Compressive Strength 6000 psi
Each Unit Contains: 1 jar of resin, 1 syringe of hardener and
1 mixing stick. (See page 19) Thermal Expansion 4.1 x 10-5/ºC
Cure R. T. 16 hours
100ºF 4 hours
150ºF 2 hours
200ºF 10 minutes
250ºF 7 minutes
Duralco 120 Replaces Duralco 120 Provides Conductive Paths Duralco 125 Replaces
Soldering in an Lamp Assembly In a High Temp. Motor Soldering on a Circuit Board
Duralco™ Conductive adhesives and potting compounds Duralco 124 650°F Ultra Temp Silver Based
provide the conductivity required for many high temp. A two component, silver filled adhesive for High Power
electronic and industrial applications. applications
These Ultra Temp. Adhesives combine Cotronics’ unique Just mix and cure with mild heat. Can be used up to 650°F.
resins and hardeners with specialty conductive fillers to Users report: Duralco 124 provided a conductive bond for
provide continuous service up to 650ºF. over 6 months at 650°F.
They will bond to glass, ceramics, metals and plastics and Duralco 125 450ºF Flexible Conductive Silver Based
offer excellent resistance to most chemicals and solvents. Easy to use, “one to one”, applicator kit. Just dispense, mix
Applications Include: Solder replacement, semi-conductor and apply this smooth creamy paste and cure at room temp.
bonding, shielding, electronics, circuit board repair, etc. Bonds to most metals, ceramics, and plastics to form stress
Duralco 120 500ºF Silver Based free, electrically conductive bonds.
A Silver filled epoxy that cures at room temp. to form Duralco 126 450ºF One Component, Silver Filled
electrically conductive bond lines for use to 500ºF. A one component, highly conductive epoxy specifically
Contains over 70% Ultra Fine Active Silver to provide the designed for production applications. No mixing. no mess.
ultimate in electrical conductivity. Resistance of 0.00008 Just dispense and heat cure.
ohm-cm have been reported in independent tests. Commonly used in automatic dispensing equipment.
Duralco 120 is ideal for forming electrically conductive Duralco 127 400ºF Graphite Based Dispenser Kit
bonds, attaching heat sensitive components and as a solder Easy to use, “one to one”, applicator kit. Just dispense, mix
replacement. and apply. This smooth creamy paste cures at room temp.
Duralco 122 500ºF Nickel Based and is ideal for low cost production applications. Can be
This Nickel filled adhesive and casting epoxy was specially used in automatic dispensing equipment.
formulated to provide an economical alternative to silver
Cat. No. Temp. Size Price
filled, electrically conductive epoxies.
Duralco 120 . . . . . 500ºF . . . . . . . . . 2 oz. . . . . . . . . 99.95
Duralco 122 is low in cost and highly conductive.
Duralco 122 . . . . . 500ºF . . . . . . . . 4 oz. . . . . . . . 69.00
It is ideal for use in applications where the upmost in
Duralco 124 . . . . . 650ºF . . . . . . . . 2 oz. . . . . . . . 119.95
electrical conductivity is not required.
Duralco 125 . . . . . 400ºF . . . . . . . . . 1 oz. . . . . . . . . 77.95
Can be used to 500°F.
Duralco 126 . . . . . 450ºF . . . . . . . . . 2 oz. . . . . . . . . 94.95
Duralco 127 . . . . . 400ºF . . . . . . . . . 2oz . . . . . . . . . 49.95