Professional Documents
Culture Documents
com
LM2902,LM324/LM324A,LM224/
LM224A
Quad Operational Amplifier
Features Description
• Internally Frequency Compensated for Unity Gain The LM324/LM324A,LM2902,LM224/LM224A consist of
• Large DC Voltage Gain: 100dB four independent, high gain, internally frequency
• Wide Power Supply Range: compensated operational amplifiers which were designed
LM224/LM224A, LM324/LM324A : 3V~32V (or ±1.5 ~ specifically to operate from a single power supply over a
16V) wide voltage range. operation from split power supplies is
LM2902: 3V~26V (or ±1.5V ~ 13V) also possible so long as the difference between the two
• Input Common Mode Voltage Range Includes Ground supplies is 3 volts to 32 volts. Application areas include
• Large Output Voltage Swing: 0V to VCC -1.5V transducer amplifier, DC gain blocks and all the
• Power Drain Suitable for Battery Operation conventional OP Amp circuits which now can be easily
implemented in single power supply systems.
14-DIP
14-SOP
OUT1 1 14 OUT4
IN1 (-) 2 1 4 13 IN4 (-)
_ + _
+
IN1 (+) 3 12 IN4 (+)
VCC 4 11 GND
OUT2 7 8 OUT3
Rev. 1.0.4
©2002 Fairchild Semiconductor Corporation
LM2902,LM324/LM324A,LM224/LM224A
Schematic Diagram
(One Section Only)
VCC
Q5 Q6 Q12
Q17
Q19
Q20
Q2 Q3 R1
C1
IN(-) Q4 Q18
Q1
R2
IN(+) Q11 OUTPUT
Q21
Q10 Q15
Q7
Q8 Q9 Q14
Q13 Q16
GND
Thermal Data
Parameter Symbol Value Unit
Thermal Resistance Junction-Ambient Max.
14-DIP Rθja 95 °C/W
14-SOP 195
2
LM2902,LM324/LM324A,LM224/LM224A
Electrical Characteristics
(VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified)
Note :
1. VCC=30V for LM224 and LM324 , VCC = 26V for LM2902
2. This parameter, although guaranteed, is not 100% tested in production.
3
LM2902,LM324/LM324A,LM224/LM224A
Note:
1. VCC=30V for LM224 and LM324 , VCC = 26V for LM2902
2. These parameters, although guaranteed, are not 100% tested in production.
4
LM2902,LM324/LM324A,LM224/LM224A
LM224A LM324A
Parameter Symbol Conditions Unit
Min. Typ. Max. Min. Typ. Max.
VCM = 0V to VCC
-1.5V
Input Offset Voltage VIO - 1.0 3.0 - 1.5 3.0 mV
VO(P) = 1.4V, RS = 0Ω
(Note1)
Input Offset Current IIO VCM = 0V - 2 15 - 3.0 30 nA
Input Bias Current IBIAS VCM = 0V - 40 80 - 40 100 nA
VCC
Input Common-Mode VCC
VI(R) VCC = 30V 0 - 0 - -1.5 V
Voltage Range -1.5
Note:
1. VCC=30V for LM224A, LM324A
2. This parameter, although guaranteed, is not 100% tested in production.
5
LM2902,LM324/LM324A,LM224/LM224A
LM224A LM324A
Parameter Symbol Conditions Unit
Min. Typ. Max. Min. Typ. Max.
VCM = 0V to VCC -1.5V
Input Offset Voltage VIO VO(P) = 1.4V, RS = 0Ω - - 4.0 - - 5.0 mV
(Note1)
Input Offset Voltage Drift ∆VIO/∆T RS = 0Ω (Note2) - 7.0 20 - 7.0 30 µV/°C
Input Offset Current IIO VCM = 0V - - 30 - - 75 nA
Input Offset Current Drift ∆IIO/∆T RS = 0Ω (Note2) - 10 200 - 10 300 pA/°C
Input Bias Current IBIAS - - 40 100 - 40 200 nA
Note:
1. VCC=30V for LM224A and LM324A.
2. These parameters, although guaranteed, are not 100% tested in production.
6
LM2902,LM324/LM324A,LM224/LM224A
Temperature Tj ( °C)
Supply Voltage(v)
Figure 1. Input Voltage Range vs Supply Voltage Figure 2. Input Current vs Temperature
Figure 5. Open Loop Frequency Response Figure 6. Common mode Rejection Ratio
7
LM2902,LM324/LM324A,LM224/LM224A
Figure 7. Voltage Follower Pulse Response Figure 8. Voltage Follower Pulse Response
(Small Signal)
Figure 8. Large Signal Frequency Response Figure 9. Output Characteristics vs Current Sourcing
Figure 10. Output Characteristics vs Current Sinking Figure 11. Current Limiting vs Temperature
8
LM2902,LM324/LM324A,LM224/LM224A
Mechanical Dimensions
Package
Dimensions in millimeters
14-DIP
)
6.40 ±0.20
0.082
2.08
0.252 ±0.008
(
#1 #14
0.059 ±0.004
0.018 ±0.004
0.46 ±0.10
1.50 ±0.10
MAX
0.764 ±0.008
19.40 ±0.20
19.80
0.780
0.100
2.54
#7 #8
7.62
0.300 3.25 ±0.20 0.20
0.128 ±0.008 0.008 MIN
+0.10
0.25 –0.05
+0.004
0~15°
0.010 –0.002
9
LM2902,LM324/LM324A,LM224/LM224A
14-SOP
0.05
MIN
0.002
1.55 ±0.10
)
0.061 ±0.004
0.019
0.47
(
#1 #14
MAX
0.337 ±0.008
+0.004
8.56 ±0.20
+0.10
0.016 -0.002
-0.05
0.343
8.70
0.406
#7 #8
0.050
1.27
6.00 ±0.30 1.80
0.236 ±0.012 MAX
0.071
+0.004
+0.10
0.008 -0.002
-0.05
MAX0.004
MAX0.10
3.95 ±0.20
0.20
0.156 ±0.008
5.72
8°
0~
0.225
0.60 ±0.20
0.024 ±0.008
10
LM2902,LM324/LM324A,LM224/LM224A
Ordering Information
Product Number Package Operating Temperature
LM324N
14-DIP
LM324AN
0 ~ +70°C
LM324M
14-SOP
LM324AM
LM2902N 14-DIP
-40 ~ +85°C
LM2902M 14-SOP
LM224N
14-DIP
LM224AN
-25 ~ +85°C
LM224M
14-SOP
LM224AM
11
LM2902,LM324/LM324A,LM224/LM224A
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
www.fairchildsemi.com
www.datasheetcatalog.com