Professional Documents
Culture Documents
tokyo
MANUAL PAPER
motion dive .tokyo English Manual rev.1.0
navigation of
1
Manual Menu
•Active Environment
The environment you need to activate Motion Dive. Tokyo
•Start Up
The operations you need to know to start up Motion Dive .Tokyo
•Folder Structures
The locations of Motion Dive .Tokyo and related files when installation is successfully completed.
•Interface Guide
Introductions on each buttons & controllers to operate Motion Dive .Tokyo
•Plug In module
Introductions to Plug In modules, Visual, Text, and Control.
•Import Files
How to connect outboard devices.
•Setting
An introduction on how to output visuals & sounds.
How to connect outboard devices.
•FAQ
1 System requirements
・Windows OS
CPU:Intel Pentium II/Celeron 500Mhz or better
Memory: 64MB or more (512M recommended)
OS: Windows 98SE, Me, 2000, XP
・Mac OS 9 / OS X
CPU:CPU in first iMac or later (G4 recommended)
Memory: 64MB or more on OS 9.x, 516MB or more on OS X 10.2x
OS: Mac OS 9.x / Mac OS X 10.2x
THIS SOFTWARE IS SOLD FOR PRIVATE USE ONLY AND ANY OTHER USE IS PROHIBITED.UNAUTHORIZED REPRODUCTION, DISTRIBUTION, PUBLIC PERFORMANCE
PERFORMANCE OF ALL THE SOFTWARES, PRODUCTIONS, PHOTOGRAPHS, AND PRINTINGS IN THIS SOFTWARE WITHOUT CONSENT OF THE COPYRIGHT
INFRINGEMENT MAY SEE ENFORCED BY LEGAL ACTION
Copyright (C) 2003 digitalstage inc. All right reserved. Made in Japan.
2
2 Install & Uninstall
Install
Welcome to Motion Dive!
In order to start installation, you need the 2 CD-Roms included in the
package. Regardless of the type of your PC (Windows, Mac OS 9, OS
X...etc), please insert Disc 1 into your CD-Rom driver.
When you start up the Installer, instructions for installation will be indicated
on your screen. Please check the printed sheet of installation that comes
with the package.
Installer DISC1
Uninstaller
The process of uninstalling Motion Dive varies, depending on your operating system.
•Windows:On the Start Menu, you should find <Uninstaller for Motion Dive>.
Please follow the instructions.
•Mac (OS9, OS X)You can uninstall from your pop up menu of the installer, also you
can uninstall by dragging and dropping <motion dive. Tokyo> out of the application
folder and into the desktop trash bin.
The Motion Dive Uninstaller does not delete all the files created by users. If you want to delete all
your files for Motion Dive or to clean installation, you must throw away the <My MD Tune> folder
into the bin. The instruction on <My MD Tune> is sited below.
Uninstaller (Windows)
3 Folder Structures
3
4 Initial Start Up
Windows Macintosh
Quit
To quit Motion Dive, open Menu bar and quit, or click the button on the
top right of your screen.
http://www.digitalstage.net/en/ 4
MAIN INTERFACE
G
F
D Library
C
This library is where you can store all your clips, except music files. By
B
dragging and dropping images onto the A & B channels separately, selected
images can be displayed on your performance window. This library can also
store your original images, still images, and Flash movie files.
A-2
5
Basic Control 1/2
A-1 ABControl Simply drag & drop your visuals from your library!
The AB Control is the main panel of motion dive, and is built very simply. It
consists of 6 simple feature devices.
Drag a visual file (thumbnail) from your library and drop into Channel A, it will
1 then start to play the specified thumbnail on your performance window.
6
3 2
4
3- Scratch
5 The Scratch button restarts your visuals from the beginning of the clip. You
can also scratch visuals by clicking the button.
On the upper left corner of the Scratch button, you can find the
<PLAY>/<PAUSE>button. On the right side, the loop button is to set the
1- Control Screen
visual clip to loop (Loop). Clicking this once will make the clip run only once
The Control Screen is where your visuals on Motion Dive are played.
(Un-loop).
Drag your visual files (thumbnails) from your library and drop into the
Channel A Screen. You will then see the visuals on your main
4- Clip Remover
performance window.
Click this to remove the current visual clip showing on your Control Screen.
5- Timeline
2- Sub Channels
Timeline shows a sequence of your visuals. You can adjust the length and
Sub channels are located next to the screen. These channels can
change the start/end points. You may also drag In/Out points on a gauge to
stand by other visual files for you. You can set possible clips that you
adjust the points. The middle button is to reset the set up.
are going to use next. When you click a sub channel clip, the clip on
your control screen will be swapped with the selected sub channel
6- Speed Controller
clip. You can directly click onto these channels to function as a
Speed Controller adjusts the speed of your visuals. Drag around the circular
showing visual.
knob and adjust the image to your preferable speed. When double clicked,
the speed resets to original. The introduction on BPM SYNC is sited on BPM
Plug-in (Page ##).
6
Basic Control 2/2
A-2 Mixer This Mixer is where you mix your visuals located on Channel A-B.
1 SWITCH
Click this to switch a visual from either Channel A-B or B-A.
2 A B Fader
AB Fader bar can be dragged for manual mixings.
2 3. Auto Faders
Each button has 3 different mixing speeds.
3 FD1: Fast FD2: Normal FD3: Slow
5 When you want to quit the mix pattern, simply click each button to turn off.
4
4. TAP
The TAP button memorizes the change of an actual mix.
1
Switch on the TAP button, then tap in your mixing points on the AB
SWITCH, it memorizes the mix and automatically loops your mix. When the
Auto Fader is off, it changes the clip from A-B according to your tap points
on the AB SWITCH.
5. OFF
The OFF button stops the current mixing function,
resetting both Auto Fader and Tap functions.
Use the combination of Auto Fade & TAP function! TAP has a quantizing function.
When you TAP, you may switch TAP is able to memorize a maximum of 8 switch timings. If
On/Off the Auto Fader to make you click the switch to the same tempo as the music you’re
playing, it begins to synchronize itself to it.
more variations to your
performance. ※When TAP is clicked too quickly, the first several clicks are
automatically ignored, but it eventually grasps the tempo in time.
A-3 Total Control Total Control area functions on your Performance Window
1. Break Down Button 2. Total Fader
When the Break Down Button is pushed once, the visuals on your performance window will quickly fade out. This The Total Fader is the main Fade Out/In
is useful when you want to instantly quit showing images. When the Break Down Button is pressed for total fade control bar. The Background of a
2 Total Fader out, the red lights illuminate around your performance window. This is an indication of “Stand By Mode” until your performance window is always black.
next action. When you click the button again the visual is displayed back on your performance window.
3. Full Screen Button 4. Total Cut Out
Total Cut Out Break Down Button Full Screen Button Take note that if you are using a low spec The Total Cut Out button cuts out all your
machine, full-screen visuals may display playing visual clips running on your
4 1 3 poor quality images. Controller A&B.
7
CONTROL PLUG-IN
All the control plug-ins are located here.
The basic Control Plug-Ins are BPM/MACRO/MUSIC PLAYER.
To select plug-ins, click the top left icon of each plug-in.
The BPM function enables you to make any length of visuals into the length To synchronize
of a 4-beat rhythm. By clicking your mouse with the beat you want to your visuals to
adjust, the motion dive BPM Plug-In automatically works out the BPM of your music, push
your music. Once the BPM is set, you simply select BPM SYNC mode this button on.
(located on the top of Speed Controller), your music will then be
synchronized with your visuals. You can also visually see the 4 bars
indicated at the bottom of the BPM window. If you are off beat, click
Warning
SCRATCH to adjust the beginning of the beat. BPM will not affect visual clips that are
longer than 20 seconds. This is to save
consumption on your HD.
MACRO
MACRO do not record the actual
Without biting into your HD capacity the Macro function is able to memorize
visual mix itself, but record your
all your mix patterns and its effect set-ups. This function all ows for
actions within the application.
automated play, and enables you to create original visual clips for each piece
Therefore, the size of the recording file
of music for your event performance or event presentation.
is very small. You cannot give out only
the file. If you want to record your
visual mix itself, please check the
SETTING.
MUSIC PLAYER
TUNE is a plug-in system for "motion dive .tokyo". TUNE helps you to mix visuals nice md creative.
6TUNEs are ready to use from the original package.
There are many of varions TUNEs which are lined up to be released.
8
Visual Plug-In
1 Select Plug-Ins
Click the right top buttons on the Visual Plug-in area for selecting plug-ins.
1
2 FX wheel
Change the color of the visual by clip and drag right or left.
COLOR EQ
Color EQ is a real time color changing equalizer to change colors of visual clips. You have 2 color controllers, a color circle and an
Color EQ is separated to each A & B channels. This effect has infinite variations to recreate FX wheel below a color circle to control the colors.
your clips to a new color clips. The mixture of these two selected colors (Double
Coloring) affect the visual clip on your performance
window. To stop the color effect, simply press the
OFF button.
LAYER MODE
18 different FXs can be selected on the Layer Mode. The Layer Mode is able to create 18 patterns of the Layer Mode
visual effects with professional equipment. You can mix either a bright part of your clip or a 18 FXs Click the Next Page button
1. Reverse 1. Blend
dark part, and even reverse the mixing images. Those who use graphic software know that
2. Darkest 2. Matte
if you are mixing 2 visuals, you would need to adjust the best part. The Layer Mode works 3. Lightest 3. MDT COPY
the same. Try and find your favorite ways of mixing, as it is important to start trying them. 4. Add 4. MDT Reverse
To stop the layer effect, press the OFF button. 5. Add Pin 5. Background Transparent
6. Subtract 6. Lighten
7. Subtract Pin 7. Darken
A A 8. Ghost 8. Transparent
9. MDT Ghost 9. MDT Transparent
B B
(Original A / B) (Original A / B)
TEXT
Text is a plug-in to type your text and project on your performance window.Find the You can sare the texts.by just typing texts in the
blue text area and click it to start typing. When you click the Up/Down button, you can see blue area.
other sets of texts. You have 9 different patterns of text motions. Choose your pattern and
click <SHOW> to project your typed texts.
9
Library
Store Unlimited movie clips, tabs, libraries to organize your visual files.
Tab
1
3
2
Move Page
Create new tab
5 4 6
Create new library set Library set Library scroll button
1. Tab : Tab is a storage space for your visual clips with thumbnails. Each Tab can hold up to 24 different thumbnails.
2. Create new tab : To create a new Tab, click the <+> button at the left side of the Tabs.To name your Tab, simply click on the top of your Tab and type in.
3. Move Page : To show your hidden Tabs, click the Move Page button located on the top right of Library window.
4. Library set : Library Set is a book of Tabs.
5. Create new library set : To create a new library set, press the <LIB> button on the left corner of the Library window.
6. Library scroll button : The library scroll button can change your operating library set.
Change order of your library sets Delete thumbnails from tab and library set
Simply drag the library set and swap To delete a thumbnail from Tab or Library
around. Set, you can drag a thumbnail and throw it
in a bin on the right corner of the screen.
The file will not be deleted from your
resource window, so you can always
retrieve thumbnails that you threw away.
10
Import File Management Window
The Import File Management Window is where you can view all your imported files.
It also imports visual clips to store on Motion Dive.
1. Import Button
Click this button and the Import File Management 8 User change button
Window pops up above your library.
Thumbnail picture shot window 4
2 Import Style
2. Import Style
Choose Import Style either from File or Folder. When Copy or Move
you click <File>, you can only import 1 selected file. 3
When you click <Folder>, you can import all the files
inside the selected folder. By clicking these buttons, the
system dialogue will appear. Please select the wanted 7
file or folder to be imported. リスト表示方法 Close Button 6
3. Copy or Move
When you choose either a file or a folder to be
imported, another window appears for you to choose
whether you want to copy the selected file/folder, or to
move the selected file/folder. When this is chosen, it 1 5
automatically shoots a picture for creating a thumbnail Import Button Register your Imported files into your library
for this visual clip file.
4. Thumbnail picture shot window 5. Register your Imported files into your library 6. Close Button
If you want to change the picture of the thumbnail that Once files are imported, you need to drag your Once when all the above are done, you are
was automatically shot, you can find your favorite part wanted files to your library. Your imported files completed for importing. Please click the
of the clip to re-shoot a picture for a new thumbnail. can be copied as many times as you want. <CLOSE> button to quit Import File
Click your thumbnail once then press <Snap> to Management Window and go back to the
change your thumbnail picture. normal interface window.
Still Sound How about BGV (Back Ground Visuals) for still images?
Still images from a digital camera can be imported directly without
JPEG BMP GIF PICT AIFF WAV losing resolution, so you can enjoy background visuals with your
favorite music.
AIFF and WAV are loadable as Compatible to Flash MX (includes action script)
PNG PSD TARGA TIFF MP3 well. Motion Dive can import Flash format.
11
SETTING
The visual & sound Output Project Motion Dive visuals on TV & Projector
There is no need to set up any other equipment if you are enjoying Motion To project visuals use the below methods that are appropriate.
Dive just for yourself. However, if you are showing your visual images to Motion Dive as a software is not supporting to project visuals outside
others at an event or presentation, you need to connect with other your PC, however; you can project your visuals by projecting your PC
equipment to output visual & audio. screen.
12
FAQ 1/2
•Can I change a user when the PC is a multiuser environment? •The <application> folder is not displayed. (OSX)
Both in the cases of Macintosh and Windows, Please click the motion dive icon in Dock, with pressing down a Control key.
It is not possible to make motion dive a multiuser environment. And choose a menu {display finder}. The folder of application will be displayed.
Please use this software only by one user name with an administrator's authority.
•Starting of motion dive, the message "operation is impossible •"It ended by the unexpected reason" is displayed after motion dive
since a memory is insufficient" is displayed. is quitted.(OS 9 and OSX)
**In WindowsXP and 2000, when logged into OS by the user of a full-size character, In spite of having normal ended, such an error may be displayed depending on the
this problem occurs. This is because the specification of OS and the specification of state of a memory. There is no problem in the operation of the software itself.
motion dive that directory management differ from each other, and a memory is not
insufficient.
This problem is avoidable by the following methods.
•What is the version of QuickTime used as the candidate for
>>Please log in to OS again by the user name of a <alphabet name>
security of operation?
with the authority of Administrator.
Please register the user of an alphabet name newly 6.2 or more QuickTime is made applicable to a guarantee of operation.
rather than please changing into the alphabet the user name of the full-size character Although the file of QuickTime5 also operates with this software,
which was being used until now. keep in mind that it becomes the outside for a guarantee.
(It is not related to the user name at the time of the serial input of motion dive)
**When motion dive is installed in a deep class in the case of Windows,
this phenomenon occurs. If it installs with a default setup of an installer, •Is it necessary to make QuickTime into the PRO version?
this problem will not arise.
It operates satisfactory by the free version contained in an installer.
•After motion dive is quitted, the row position of the file which •Japanese is not displayed with text plug-in.
exists in a desktop will shift. It is only the alphabet that text plug-in at the time of installation can make it display.
Since it is the specification which changes the resolution of a monitor We distribute gratuitously plug-in on which Japanese can be displayed
automatically, such a phenomenon may occur in some environments. as a user's registration privilege only to one which registered.
Please see the download page of a user privilege for details.
However, ID and the password which were indicated by the mail
•Using Note PC and a liquid crystal display monitor, the at the time of user's registration are required at the login.
interface is displayed small.
This is the phenomenon that occurs by the specification of the monitor
of Note PC, or setup of a liquid crystal display monitor. There are some
liquid crystal display monitors which do not give an expansion indication
united with resolution.
Please ask PC maker and a monitor maker in that case.
Incidentally, when an image is projected by the external output,
regardless of the display size of a liquid crystal display monitor,
it is outputted exactly.
13
FAQ 2/2
•AB FADER does not move smoothly. •An error is displayed when returning from an Import screen by the
Depending on a setup of visual plug-ins, the fader may not be carried out exactly. Win machine of low spec.
This is because priority is given to a setup of plug-ins, and is not fault. Although the message "Unable to save the movie" may be displayed,
For example, when <REV> (reversal) in <LAYER MODE> plug-in is performed, the since it is saved in fact, there is no problem.
fader may not function sufficiently.
For returning, please turn OFF <LAYER MODE> plug-in.
•I want to reproduce the image of a digital camera or a DV camera.
•Is there any method of controlling the speed of a Flash movie? The motion dive is QuickTime plug compatible. So if it changes into a standard movie
form from QuickTime PRO which is sold by Apple on-line sale,
This serves as a specification by the side of Flash. the animation and the special image file of a digital camera unreproducible
In case you create a Flash movie, you will need to adjust to the speed of liking as it is by motion dive can also be read into.
beforehand.
•There are effects which are not effective at the time of •What is a down converter?
when Flash movie is played. A down converter (common name : scan converter) is the machine which changes
There are what becomes effective in a Flash movie, and a thing not the monitor output of a personal computer into the signal of television.
becoming about each item of ColorEQ plug-in or LAYER MODE plug-in. In the case of a model with 2 double expansion function, with an interface
This is because Flash is the display of a vector base. In case you create a displayed, only the portion of an image can be expanded and it can display on
Flash movie, you will need to adjust to the speed of liking beforehand. television or a projector.