Professional Documents
Culture Documents
ibm.com/catia
Product Lifecycle Management
IBM Product Lifecycle Management (PLM)
PLM is a powerful suite of application solutions supported by IBM middleware that
puts your product – the source of your profits – at the centre of everything you do.
It pulls relevant information from your Enterprise Resource Planning (ERP), Supply
Chain Management (SCM) and Customer Relationship Management (CRM)
systems, associates it with product knowledge, and makes it available to your
extended enterprise – empowering everyone from manufacturing to marketing and
from purchasing to field support to work faster and smarter. This allows the entire
network of companies, working together to conceptualise, design, build and support
products, to operate as a single entity. PLM allows companies to share common
business processes and a common knowledge of the product throughout all stages
of its lifecycle, from concept to retirement.
IBM is the world leader in providing e-business solutions for manufacturers. For
more than 21 years, IBM has been at the forefront of the engineering, design, and
manufacturing industries, serving the needs of small and medium-sized businesses
as well as top Fortune 500 companies. The cornerstone of this success has been
the on-going strategic partnership with Dassault Systèmes which has delivered the
CATIA**, ENOVIA** and SMARTEAM**, the application foundations of PLM.
With the help of IBM’s e-business and PLM consulting services expertise, or its
extensive network of Business Partners, manufacturers can easily make their PLM
vision a reality. Faster time to market, higher quality products, turning the right ideas
into products and the creation of entirely new markets become the hallmark of
your business.
2 ibm.com/solutions/plm
CATIA V5
3
CATIA Version 5 Release 10
From Entry PLM to vertical applications for best
practice deployment and business process optimization
CATIA V5 Release 10 increases its leading end-to-end product development
process coverage for automotive, aerospace, consumer goods and
electrical and electronics industries with 13 new products and 81
enhanced applications integrating intelligent productive features
and dedicated expert solutions. Small and medium businesses will
find CATIA V5 Release 10 easier than ever to use and implement,
with extended process coverage and enhanced integration to
SMARTEAM. All companies can use the new CATIA Business
Process Knowledge Templates product to leverage advanced
knowledge capture capabilities. CATIA V5 Release 10 improves
business process efficiency by interactively capturing, automating,
and deploying best practices into user-defined vertical applications.
4
Definition of best practices, capture of know-how, and process automation can
be achieved in a simple and intuitive way, without specialist programming skills.
Key knowledgeholders can capture and automate the critical business processes,
design, and engineering tasks, embedding core-knowledge rules and checks
within those processes. The result is vertical user-defined applications that embody
predefined methodologies derived from corporate best practices. Using these
capabilities can dramatically improve productivity and competitiveness across a
wide range of detail processes.
CATIA V5 Release 10 delivers 13 new products and enhanced capabilities conceived and refined
in close cooperation with customers deploying CATIA V5 across their extended enterprises.
5
Flexible packaging
CATIA Version 5 is packaged to provide an easy way to select the solution best
suited to usage profiles and process requirements. At the heart of this model are
predefined configurations which include selections of products targeted at specific
tasks or processes. To further tailor the solution, products can be added to these
configurations to address broader or specialist requirements, either as shareable or
add-on products. Products can be ordered in three ways:
The level of capability required for specific tasks or processes can also vary due to
differing product or process complexity or technological requirements. To address
this and allow the most cost effective implementation, CATIA V5 products are
organised on three different levels.
6
CATIA V5 P1 platform delivers affordable 3D PLM The CATIA V5 P3 platform maximises productivity on
productivity with the security of potential growth to specific advanced processes with focused solutions.
advanced generative applications. With CATIA P1 Solutions They lead expert engineering and advanced innovation,
associative product engineering, product knowledge with unique and very specialised applications to integrate
reuse, end-to-end associativity, product validation and product and process expertise.
collaborative change management capabilities are now
available to all small and medium sized enterprises (SMEs). The CATIA V5 world is fully scalable, as P1, P2 and
P3 platforms operate on the same data model, share
CATIA V5 P2 platform enables further PLM process methodology and facilitate growth and cost effective
optimization through knowledge integration, process deployment across the extended enterprise. The common
accelerators and customised tools for automated design user interface across platforms minimises training costs and
through to manufacturing. CATIA P2 Solutions can maximises effectiveness as new capabilities accommodate
drive generative product engineering, using the most expanding scope of usage. The ability to grow as your
comprehensive application portfolio available. ‘design-to- needs expand is ensured by the ability to install advanced
target’ optimization allows the user to easily capture and P2 applications on top of P1 seats.
reuse knowledge, and stimulate collaborative innovation.
Flexible packaging
7
Mechanical design
From concept to detailed design and onto drawing production, the CATIA
Version 5 mechanical design products accelerate core activities of product
development. Mechanical design products also address sheetmetal requirements
and mould manufacturers through dedicated applications that dramatically
enhance productivity and reduce time-to-market.
8 ibm.com/catia/catiav5r10/mechanical
Configurations
SL1
XM1
9
NEW CATIA – Styled Mechanical Design 1 (YM1)
Perfectly suited to the Consumer Goods domain, the YM1 configuration is a 3D product
creation package including comprehensive part and assembly design features, as well as
associative drawing extraction capabilities and advanced surfaces creation tools. Furthermore,
designers will find all necessary 2D drafting features for efficient drawing production. This
configuration is greatly empowered with the essential and comprehensive package of core
Shape and Styling products to meet industrial needs of the Consumer Goods domain. In
addition, import/export of IGES and STEP data make the collaborative design with the
extended enterprise very easy. Users managing parts coming from external applications will
appreciate the Healing Assistant 1 product that will allow them to check validity of imported YM1
geometry with regard to V5 modelling criteria and improve the topology and the geometry of
the analysed objects.
10
CATIA Mechanical Engineering 2 (ME2)
This configuration provides in one seat all the necessary tools to perform advanced 3D
engineering of parts and assemblies in the context of the full scale digital mock-up, and
generation of production drawings. It includes intuitive design stress testing functions thus
making available early part pre-validation tools to all designers. As a CATIA P2 configuration,
this solution offers advanced 3D oriented productivity features, such as fly-through navigation
and advanced specification graph display and manipulation. Customers benefit from a high
productivity solution which is natively interoperable with other CATIA Version 5 sets of solutions
and which offers integration tools for compatibility with CATIA Version 4 and data interfaces to
most frequently used industry standards, which make it a configuration of choice for existing ME2
Version 4 customers. As a CATIA P2 configuration, customers benefit from a seat definition
which can be easily and seamlessly upgraded by adding shape design capabilities, thus
allowing to design parts of greater complexity with hybrid modelling methodologies.
11
NEW CATIA – Styled Mechanical Design 2 (YM2)
Perfectly suited to the Consumer Goods domain, the YM2 configuration is a 3D product
creation package including comprehensive part and assembly design features, as well as
associative drawing extraction capabilities and advanced surfaces creation tools. Furthermore,
designers will find all necessary 2D drafting features for efficient drawing production. This
configuration is greatly empowered with the essential and comprehensive package of core
Shape and Styling products to meet industrial needs of the Consumer Goods domain. In
addition, import/export of IGES and STEP data, as well as the ability to work in a hybrid V4/V5
environment make the collaborative design with the extended enterprise very easy. Knowledge
basic capabilities provided through Knowledge Expert 1 will allow designers to import and use YM2
corporate knowledge stored in rule databases to ensure consistency and quality of their
designs. Users managing parts coming from external applications, such as mould makers, will
appreciate the Healing Assistant 1 product that will allow them to check validity of imported
geometry with regard to V5 modelling criteria and improve the topology and the geometry of
the analysed objects.
Products
CATIA – Assembly Design 1 (AS1) CATIA – Part Design Feature Recognition 1 (FR1) NEW
Defines mechanical Recognises Part Design
assembly constraints, features of an Isolated
automatically positions B-Rep.
parts and checks
assembly consistency.
12
CATIA – 3D Functional Tolerancing and Annotation 1 (FT1) CATIA – Generative Drafting 1 (GD1)
Defines and manages Generates associative
tolerance specifications drawings from 3D part
and annotations on and assembly designs.
3D parts.
13
CATIA – Weld Design 1 (WD1) CATIA – Wireframe and Surface 1 (WS1)
Designs welded Creates in context
assemblies in an wireframe construction
intuitive and productive elements and basic
environment. surfaces.
CATIA – Assembly Design 2 (ASD) CATIA – Core and Cavity Design 2 (CCV)
Easily defines Creates associative
mechanical assembly definition of mould core
constraints, and cavity, assesses
automatically positions part mouldability, tool
and constrains parts feasibility and detailed
and checks assembly mechanical design of
consistency. core and cavity plates.
CATIA – 3D Functional Tolerancing and Annotation 2 (FTA) CATIA – Generative Drafting 2 (GDR)
Defines and manages Generates drawings
tolerance specifications from 3D part and
and annotations on 3D assembly designs with
parts with dynamic assistance to manage
assistance for complex schema.
standards compliance
checking.
14
CATIA – Sheetmetal Design 2 (SMD) CATIA – Structure Design 2 (STD)
15
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
Dimensional Control 3DCS Designer CAA The premiere V5 solution for designers to very easily and Any P2 mechanical
Systems Inc. V5 based graphically analyse tolerances to moderate design clearances, package
mating and assembly issues throughout the entire design
phase. You can evaluate concepts early in the product
development cycle, identifying problem areas long before
investment in costly design changes and tool manufacture.
3DCS Analyst CAA The tight integration of this 3D Tolerancing Analysis software Any P2 mechanical
V5 based enables users to benefit from an advanced and easy to use package
graphical and statistical dimensional variability simulation,
through the entire design and manufacturing process.
Hitachi Zosen Space-E CAA Facilitates the detail design of moulded parts by providing CATIA – Mechanical
Information Systems V5 based Core automation for core and cavity definition. Offers tools for a Design 2 (MD2) or
and Cavity Design quick assessment of part moldability based on mechanical any package including
Add-on criteria to optimized cost of manufacturing. these products
Space-E CAA Provides dedicated features to design associative mould CATIA – Mechanical
V5 based Mould structures. It includes catalogs of standard mold components Design 2 (MD2) or
Design Add-on from major providers (Futaba, Hasco, DME,…) any package including
these products
Trace Parts Trace Parts CAA Standard parts library seamlessly integrated to CATIA V5 CATIA – Mechanical
V5 based containing more than 200,000 components from manufacturers Design 1 (MD1) or any
catalogues: Asco-Joucomatic, Bosch, Festo, Hasco, INA, package including
Legris, Norelem, Parker, Rabourdin, SKF, SNR. these products
T-Systems ITS GmbH VAMOS CAA Provides die design specific user interfaces and geometrical CATIA – Mechanical
V5 based features. Non-topological associativities allow for replacement Design 2 (MD2) or
of part data and die components without losing constraints. CATIA – Hybrid Design
Includes predefined data for the downstream processing. 2 (HD2) or any package
including these
products
16
Shape design
and styling
CATIA shape design and styling delivers innovative and fun to use products to
create, control and modify engineered and freeform surfaces.
• The most complete and integrated portfolio to... Create shapes based on a
physical mock-up or styled sketches through the Reverse Engineering solution;
design preliminary to detailed parts requiring consequent surfacing with Mechanical
Shape products; describe assemblies of mechanical shapes like body panels with
Automotive Body-In-White Fastening; create beautiful and harmonious aesthetical
shapes with the Freestyle set; create Class A modelling shapes with the unique
Class A process oriented offer; and finally generate high quality photo-realistic views
dynamic renderings in real-time with Visualization tools.
• From general to specialized requirements for all industry segments...
High productivity and efficiency delivered to all manufacturing industries
through a complete P1 platform offer; to skills and processes centric powerful
high range technologies.
• Surface design made accessible to everyone... The easiest to use tools for
surfaces and shapes to be designed in context either by non surface specialist
designers thanks to the product ease-of-use; and advanced shape designers
looking for complete surfacing tool set.
• To allow the most flexible modification schemes... change management is
built into the design, therefore the ability to test new ideas in shorter time is given to
users. The associativity with other CATIA V5 domains allows an efficient design for
manufacturing management.
• Knowledge driven shapes... The combination of the shape design and styling
functionalities with the KnowledgeWare embedded solutions paradigm provides
the power of explicit rules that define the product behaviour, with interactive capture
of design intent as the design is built. As a result, the system is an expert advisor
to guide users through the tasks, warning them of rule violations and conflicts, thus
automating design generation and reducing risk.
ibm.com/catia/catiav5r10/shape 17
Configurations
RE2
NEW CATIA – Automotive Body-in-White Design 3 (AB3)
This configuration provides in one seat all the necessary tools to perform advanced
and specific 3D design of Body-In-White elements used in the Automotive industry. This
configuration provides user a full portfolio of productive and innovative applications in Design
and Drafting, but also concerning Shape design, image rendering and Interfaces. It gives user
an end-to-end productive solution to address complex Body-In-White part design and achieve
ready-to-manufacture digital mock-up, while benefiting from CATIA V5 advanced knowledge
and V4 Integration.
Using CATIA – Automotive Body-In-White fastening 3 (ABF), the user is provided with intuitive
tools to create and manage Spot like Fasteners. The user can switch, if needed from a 3D Point AC3
shape definition to a 3D hemispherical shape specification. In addition to placing the fasteners,
reports can be issued from the application in order to list Fastener location coordinates and the
Joined parts properties at each fastener location.
The framework of this solution relies on the P3 platform that gives user an overwhelming
Product and Process expertise integration with the highest productivity focused on the specific
Automotive Body-In-White Fastening processes.
AB3
18
Products
CATIA – Freestyle Shaper 1 (FS1) CATIA – Generative Shape Design 1 (GS1) NEW
Provides surface-based Creates in context
tools to help designers specification driven
create styled shapes shapes based on a
and surfaces. combination of
wireframes and
extensive multiple
surface features.
19
CATIA – Generative Shape Design 2 (GSD) CATIA – Generative Shape Optimizer 2 (GSO)
Helps design advanced Extends the combined
shapes based on a wireframe and multiple
combination of surface creation
wireframe and features of CATIA –
extensive multiple Generative Shape
surface features, with Design 2 (GSD) with
full specification powerful global
capture. deformation
technologies.
CATIA – Automotive Body-in-White Fastening 3 (ABF) NEW CATIA – Automotive Class A 3 (ACA)
Designs Body-in-White Creates and models
Fasteners in the aesthetic and
Automotive Assembly ergonomic shapes to
context. highest Class A quality
using ground breaking
surface modelling
techniques like reality
modelling, associative
freeform modelling and
capture of design intent.
20
CATIA – Automotive Class A Optimizer 3 (ACO)
Creates and models
aesthetic and ergonomic
shapes to highest Class
A quality using global
surface modelling
techniques like shape
modelling, and global
surface feature creation
methods, like global
flange.
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
21
Product synthesis
Get it right the first time! The extensive range of tools provided with CATIA Version 5
product synthesis solutions allow easy automation and validation of your design and
manufacturing data, and effective capture and reuse of your corporate know-how.
• The core of CATIA V5… Enjoy the power and the ease-of-use of these embedded
multi-discipline tools. The CATIA V5 KnowledgeWare solutions turn implicit design
methods into explicit knowledge and allow users to capture and reuse corporate
know-how throughout the entire product life cycle. Users can add and share this
extra intelligence of any type, from design to manufacturing, for simple applications
or enterprise wide deployment.
• Capture expertise and automate business processes… The KnowledgeWare
solutions combine the power of explicit rules, that define the product behaviour,
with interactive capture of design intent as the design is built. As a result, the system
acts as an expert advisor to guide users through the tasks, warning them of rule
violations and conflicts, thus automating design generation and reducing risk. All the
power of knowledge can be embedded directly in the design, stored in catalogues
or leveraged through the use of V5 process-based pseudo-applications, allowing
designers to accelerate and secure the design process cycle time, while being
more innovative.
• Explore more design alternatives and automated goal driven design
optimization… The KnowledgeWare solutions permits users to assess and quickly
determine the best alternative for a design amongst a numerous combinations of
parameters and constraints. By taking into account multidisciplinary specifications,
such as distance, cost, volume and time, across all the CATIA V5 products, users
can perform powerful and complete assessments of designs.
• Ensure design consistency and quality… The KnowledgeWare solutions ensure
compliance to best practices and corporate standards. Users can validate their
designs and ensure acceptable standards are maintained enterprise wide.
It ensures designers of the quality of their design and enables them to make the
proper decisions faster.
• Brainstorm and innovate… The KnowledgeWare solutions formalize designs
with functional and conceptual definition and optimization tools. Thus, at the
conceptual stage of development, users can detect engineering problems in the
functional definition of the system and solve them with solution guidance and links to
knowledge databases.
22 ibm.com/catia/catiav5r10/productsynthesis
Focus on the DMU solutions
CATIA Version 5 DMU solutions support complex DMU reviews and simulations for
quick and efficient engineering and process decisions.
• Reduced costs and design cycle time… DMU solutions enable people
involved in engineering and process decisions to perform collaborative and
immersive visualization, navigation, review and simulation of digital mock-ups
and technical data of any complexity. Leveraging collaborative design review
methodologies across the extended enterprise, DMU solutions allow customers
to place the digital product definition at the centre of their product development
process, transforming product information into business intelligence for fast and
decisive project decisions.
• Increased responsiveness through out the design chain… DMU solutions
exploit e-business throughout the product lifecycle, and is a key component of
the digital enterprise. They form the platform on which customers can achieve
competitive leadership through product innovation. DMU solutions strengthen
communication across the extended enterprise by providing advanced tools to
support collaborative design and manufacturing decisions. Its tight integration
with ENOVIA life cycle management solutions contribute to extended
enterprise performance.
• Support all DMU needs… DMU solutions offer a unique and extensive combination
of scalable applications which can be used by all user profiles and all levels of
specialization in the enterprise at any stage of the digital product development.
They address requirements from design review to quality verification and simulation.
It is built on Dassault Systèmes’ industry-leading V5 architecture for seamless
interoperability, reduced training and support requirements, ease of installation
and enhanced team collaboration. This all means accelerated response to
business needs and investment protection. Its complete ‘plug and play’ design
review environment and real-time multi-user conferencing and extensive reporting
capabilities allow all team members to collaborate in a completely interactive
review process.
23
Configurations
Products
CATIA – Business Process Knowledge Template 2 (BK2) NEW CATIA – Knowledge Advisor 2 (KWA)
24
CATIA – Knowledge Expert 2 (KWE) CATIA – Product Engineering Optimizer 2 (PEO)
CATIA – Product Function Definition 2 (PFD) CATIA – Product Function Optimizer 2 (PFO)
CATIA – Product Knowledge Template 2 (PKT) CATIA – Business Process Knowledge Template 3 (BKT) NEW
Creates interactively Captures and capitalizes
intelligent feature, part your best business
and assembly templates processes within
which encapsulate
pseudo-applications
geometry and know-how
and deploy them through
for maximum secured
CATIA – Business
reuse through CATIA –
Product Knowledge Process Knowledge
Template 1 (KT1). Template 2 (BK2).
25
DMU Engineering Analysis Review 2 (ANR) CATIA – DMU Navigator 2 (DMN)
Provides an easy-to-use Performs advanced
capability to visualise collaborative digital
and perform digital mock-up review,
mock-up reviews of packaging and
engineering analysis pre-assembly using
studies. optimum visualization,
navigation and
communication tools.
26
DMU Kinematics Simulator 2 (KIN) CATIA – DMU Space Analysis 2 (SPA)
Defines, simulates, and Performs optimum digital
analyses mechanisms mock-up verification
for digital mock-ups of using advanced
interference detection
all sizes.
and analysis, superior
sectioning analysis,
measurement, distance
analysis and 3D
geometry comparison
tools.
27
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
MSC.Software MSC Dynamic Powered by ADAMS, it simulates the dynamic motion of Any P2 Package including
Designer assemblies inside V5, including those containing cams, DMU Kinematic Simulator
gears, latches, belts, linkages, motors, chains, etc. In 2 (KIN), optional: DMU
addition, it provides accurate loads for your FEA studies. Optimizer 2 (DMO), CATIA
– DMU Space Analysis (SPA),
CATIA-Generative Assembly
Structural Analysis 2 (GAS),
CATIA DMU Navigator 2
(DMN), CATIA-Generative Part
Structural Analysis 2 (GPS)
RealViz Stitcher Gateway Easily combines horizontally and vertically overlapping Any P2 configuration including
to CATIA photos into stunning wide-angle, high-quality panoramas that CATIA - Photo Studio 2 (PHS)
can then be used as environment maps and photo-realistic + Real Time Rendering 2
backgrounds in Photo Studio and Real-Time rendering. (RTR)
TransCAT Q-Checker CAA A management system for product data quality. that allows Any package including CATIA
V5 based the user to define various sets of checks and rules, which – Knowledge Expert 1 (KE1)
ensure that a CATIA model meets all the specifications and + appropriate configuration
requirements which are necessary for following processes. needed to perform check
Q-Checker is designed as an easy-to-use tool for the daily
tasks of the designer. Q-Checker currently has nearly 300
checks and rules. A large proportion of which have automatic
healing functionality.
LMS International Virtual.Lab Motion Virtual.Lab Motion is a mechanical simulation package. None
Standard It makes sure that the components interact and move as
planned under the influence of real-life conditions such
as gravity, gyroscopic, and non-linear frictional forces.
The physics of joints, controls are calculated from a wide
range of pre-defined class types. It takes into account
components that flex and vibrate, it models accurately large
accelerations and high frequencies and it derives load
inputs to other analyses such as durability.
28
Equipment and
Systems Engineering
CATIA V5 Equipment and Systems Engineering solutions provide several products in
the P2 Platform allowing simultaneous design and integration of ever-more complex
electrical, hydraulic and mechanical systems within a 3D digital mock-up while
optimizing space allocation. The CATIA V5 Plant product enables you to optimize the
production facility layout, therefore leading to optimized factory production and output.
ibm.com/catia/catiav5r10/equipment 29
Configurations
ER2
CATIA – Manufacturing Plant Layout 2 (PL2)
This configuration provides in one seat all the necessary tools to produce Plant Layout Designs and
validate them in the context of the 3D Digital Mock-ups of the plant layout and the routing systems.
It allows an easy and constant evolution from 2D drawings to 3D layouts (thus protecting previous
work) and from preliminary designs to their actual geometry. This configuration provides a
quick and easy to use solution for companies to optimize their factory production and output.
As a CATIA P2 configuration, this solution offers integration tools for compatibility with CATIA
Version 4. It includes data interfaces to most frequently used industry standards, including
CADAM drawings.
PL2
30
Products
CATIA – Electrical Harness Installation 1 (EH1) NEW CATIA – Electrical Library 1 (EL1) NEW
Designs physical Provides mechanical
harnesses within the parts and assemblies
context of the 3D with electrical
mock-up. behaviours in order to
define electrical devices.
CATIA – Circuit Board Design 2 (CBD) CATIA – Electrical Cableway Routing 2 (ECR)
Provides bi-directional Creates 3D
interface between implementation of
CATIA Version 5 and electrical cabling
electrical CAD systems. systems.
CATIA – Electrical System Functional Definition 2 (EFD) CATIA – Electrical Harness Flattening 2 (EHF) NEW
Manages functional Achieves flattening of
design and review of Electrical Harnesses
electrical systems. for extensive drafting
production.
31
CATIA – Electrical Connectivity Diagrams 2 (ELD) CATIA – Electrical Wire Routing 2 (EWR)
Creates and manages Manages the definition
logical designs of power of electrical wires within
distributive systems and the digital mock-up
command systems according to the
using industry standard functional definition of
conventions, terminology, electrical signals.
and practices.
CATIA – Piping and Instrumentation Diagrams 2 (PID) CATIA – Systems Diagrams 2 (SDI)
32
CATIA – HVAC Design 2 (HVA) CATIA – HVAC Diagrams 2 (HVD)
Provides customers with Provides a complete set
a complete set of tools of tools to create,
to create, modify, modify, analyse, and
analyse, and document document HVAC
HVAC 3D designs. diagram designs.
CATIA – Plant Layout 2 (PLO) CATIA – Raceway & Conduit Design 2 (RCD)
Enables organisations Provides customers with
to optimize their a complete set of tools
production facility to create, modify,
layout, leading to analyse, and document
optimized factory conduit 3D designs.
production and output.
CATIA – Structure Functional Design 2 (SFD) CATIA – Structure Preliminary Layout 2 (SPL)
Enriches conceptual Designs intuitive and
design of structural associative structural
elements at the elements of a
functional phase of the preliminary draft.
conception.
33
CATIA – Tubing Design 2 (TUB) CATIA – Tubing Diagrams 2 (TUD)
Provides a complete set Provides customers with
of tools to create, a complete set of tools
modify, analyse, and to create, modify,
document tubing analyse, and document
designs. tubing diagrams
designs.
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
34
Analysis
The generative capability of the CATIA V5 Analysis Solution provides fast design/
analysis iterations for any type of part or assembly. Moreover, as a result of the
CATIA V5 knowledge-based architecture, it’s very easy to drive product optimization
based on analysis specifications and results. Lastly, its unbeatable ease-of-use
makes this powerful tool accessible to both designer and specialist.
• Fast design – analysis loops… The common CAD – FEA environment and the
generative and associative specification driven capability permits a wider number
of mechanical behaviour and sizing assessments of parts and assemblies earlier in
the product development process. As analysis specifications are an extension of the
part or assembly design specifications the impact of design changes can be rapidly
reassessed with automatic updates.
• Knowledge-based optimization… The analysis suite of products takes advantage
of the native CATIA knowledge-based architecture. You can achieve highly
sophisticated design optimization by capturing and studying the knowledge
associated to your part design and associated analysis. You can also reuse analysis
features and apply knowledge-based rules and checks to ensure compliance to
company best practices.
• Scalability… The CATIA V5 Analysis solutions address the needs of designers,
engineering analysts and advanced analysts, either on their own or through the
extensive range of applications available through CATIA’s analysis partner solutions,
which are all based on the V5 architecture. These partnerships extend the process
coverage and address more specific needs such as multi-body dynamics, fatigue,
acoustic, and radiation to name just a few.
• An industry proven solution… The ease-of-use coupled with a common user
interface and fast computation time provides a rapid return on investment. The
analysis process is supported by a robust built-in finite element solver and mesh
generators, balancing accuracy and speed. Additionally, users can review the
characteristics of their design in a DMU environment getting a real idea of the
mechanical behaviour providing an opportunity to improve and optimize the design
early in the development cycle.
• Easy to understand and to use… The integrated and automatic approach for
pre- and post-processing as well as for solving offers a very intuitive interface
best suited to the needs of the designer, design engineer and analyst. The core
application Generative Part Structural Analysis 2 (GPS) provides this user-friendly
environment and acts as a backbone for all other analysis products. Not only that,
the common V5 tools and environment across the all CATIA applications and
Partner solutions eliminate problems of lost productivity associated with using
multiple applications.
ibm.com/catia/catiav5r10/analysis 35
Configurations
TA3
Products
CATIA – Generative Part Structural Analysis 1 (GP1) CATIA – Generative Assembly Structural Analysis 2 (GAS)
CATIA – Generative Part Structural Analysis 2 (GPS) CATIA – Elfini Structural Analysis 2 (EST)
CATIA – FEM Surface 2 (FMS) CATIA – Tolerance Analysis of Deformable Assembly 3 (TAA)
Generates associative Easily predicts the
mesh from complex tolerancing specified on
surface parts, with assembly considering
advanced control on the whole sheetmetal
mesh specifications. assembly process.
36
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
Virtual.Lab Vibration Interactive assignment of loads to a model, launch the most appropriate None
Response Prediction solver and review the simulation results using dedicated post-processing
tools. It provides a range of interactive tools to assemble components
into system-level models. It calculates the dynamic behaviour of the
assembled system. One is able to identify the number of contributing
sources and their rank. It provides unified access to test-derived
models, to FE models and to test-based loads.
Virtual.Lab FRF-based Provides a range of interactive tools to assemble components into None
System Level system-level models, to define connections, and automatically align
Response Prediction meshes. It calculates the dynamic behaviour (noise and vibration) of the
assembled system based on the dynamics of the individual components.
Component models can be any combination of FE and Test.
Virtual.Lab System- Provides a range of interactive tools to assemble FE components into None
level assembly for system-level models and to define connections. Connections between
MSC.Nastran components can be defined manually or automatically, the latter by
means of an ‘auto-connect capability’, which allows searching for
coincident boundary nodes within a specific tolerance. Three different
types of connection properties are supported: Rigid connection
property. Flexible connection property characterized by real, frequency
independent values for the stiffness, the viscous and structural damping.
Flexible connection property characterized by complex frequency transfer
functions, describing the dynamic stiffness. After having assembled
the individual components into a system-level model, Virtual.Lab writes
out the corresponding Nastran file, submits the job to Nastran, and
automatically retrieves the vibration results. Additional options give the
possibility to postprocess the system-level results data.
Virtual.Lab Path Starting from system-level noise and vibration results, you can analyze None
Contribution Analysis the critical path contributions to identify the cause of the noise or
vibration problems. You are able to identify the number of contributing
sources and their rank, at a given frequency, engine order or speed
and then vary the model parameters to explore the design space and
eliminate the problem.
37
Software partner Application name Application description Prerequisites
LMS International Virtual.Lab Creates an exterior acoustic mesh from a structural mesh. The unique None
Pre-Acoustics approach can be likened to wrapping the structure with a rubber sheet:
the element size of this rubber mesh being related to the frequency
range of interest. Virtual.Lab reduces the acoustic meshing process
from weeks to hours.
Virtual.Lab The tool creates a cavity mesh starting from a structural FE mesh. The None
Cavity Meshing tool closes all the openings, it bridges across gaps and creates a new
mesh on the surface, for a BEM solution – or a new volume mesh, for
a FEM solution. The volume mesh is hex-dominant. Special algorithms
ensure a homogeneous element size for optimum acoustic solution
speed and performance.
Virtual.Lab Acoustic Acoustic radiation calculations from structural vibrations are complex None
Response Prediction and time-consuming using conventional BEM procedures. This tool
combines the patented Acoustic Transfer Vectors (ATV) and the
ATV Response solution. A complete multi-loadcase map of acoustic
results, such as Total Radiated Acoustic Power from an engine, can be
produced in less than a day.
Virtual.Lab Engine The configuration embeds a complete set of tools needed to model, None
Acoustics solve and analyze the acoustic performance of engines and rotating
machinery. The embedded Pre-Acoustics product allows creating an
acoustic BE mesh starting from a structural engine FE mesh very fast.
The user straightforwardly models the acoustic properties, and creates
visualization meshes. Fast acoustic ATV solvers run transparently in
the background. The user can directly apply operating vibration data
calculated through the embedded vibration response solvers. Using
accurate vibration data, the acoustic performance of the engine can be
evaluated with high confidence. Tools are foreseen to plot acoustic results
on the visualization meshes, on 2D function displays or on 2.5D waterfall
diagrams to study the total acoustic radiated power as a function of
engine speed.
38
Software partner Application name Application description Prerequisites
LMS International Virtual.Lab Enables system-level durability analysis by integrating multi-body None
System-level durability simulation, fatigue and motion analysis. Fatigue engineers can now
perform full-assembly loads prediction for durability, including
Craig-Bampton analysis, as well as component-level durability analysis.
The entire model creation, analysis preparation and display process
takes place within the Virtual.Lab desktop, using and modifying models
coming from any of the major packages. For durability practicality
engineers, it gives access to state-of-the-art durability analysis methods
that are based on the well accepted LMS FALANCS solver designed to
solve industry-sized problems quickly and accurately.
ICEM CFD ICEM CFD Hexa Semi-automated meshing module that provides rapid generation of Any P2
CAA V5 based multi-block structured or unstructured hexahedral volume meshes, configuration
associative with the CATIA V5 data. including CATIA
– Generative
Part Structural
Analysis 2 (GPS)
FTI CATFORM 3D Screen out potential formability problems of sheet metal parts early in the Any P2
CAA V5 based design cycle and consequently reduce the number of changes required configuration
downstream. Also predicts flat blank shapes. including CATIA
– Generative
Part Structural
Analysis 2
(GPS), optional
CATIA – FEM
Surface 2 (FMS)
MSC.Software MSC.Nastran Gateway Provides an integrated bi-directional solution between CATIA V5 Any P2
and MSC.Nastran. It enables CATIA users to export the ‘run ready’ configuration
MSC.Nastran input file as well as import and visualize the results of including CATIA
the MSC.Nastran computation without leaving their familiar – Generative
CATIA V5 environment. Part Structural
Analysis 2 (GPS)
MSC.Nastran Enables CATIA users to directly access basic MSC.Nastran simulation Any P2
Generative capabilities in a fully generative way within their familiar CATIA V5 configuration
GPS environment. It provides an integrated, generative and seamless including CATIA
integration between CATIA V5 and MSC.Nastran. – Generative
Part Structural
Analysis 2
(GPS)
39
Software partner Application name Application description Prerequisites
MSC.Software MSC.Generative Allows design teams to simulate complex thermal operating Any P2 configuration
Thermal environments within CATIA V5. This fully generative solution including CATIA –
enables the effect of heat transfer due to conduction and Generative Part Structural
convection to be simulated and input as thermal loads in MSC. Analysis 2 (GPS)
Nastran Generative and GPS for thermomechanical studies.
MSC.STEP AP209 Provides an integrated solution between CATIA V5 and the Any P2 configuration
Gateway STEP industry standard. It enables CATIA users to transfer including CATIA –
finite element information from CATIA V5 Analysis and Generative Part Structural
Simulation environment to a STEP format. Analysis 2 (GPS)
40
NC Manufacturing
With the completeness of the product portfolio and the easy-to-use knowledge-
based V5 architecture, CATIA V5 NC Manufacturing exceeds the capabilities of all
existing NC Manufacturing applications.
ibm.com/catia/catiav5r10/NCM 41
Configurations
PM2
RM2
42
Products
43
CATIA – NC Manufacturing Verification (NVG) CATIA – Prismatic Machining Preparation Assistant 2 (MPA) NEW
Easily validates Automatically builds
machining processes geometrical machining
and analyses accuracy features for prismatic
of machined parts. machining using
advanced feature
recognition techniques.
44
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
AIKOKU Post for 5 Offers a set of Post Processors to generate CATIA – Prismatic Machining 1 (PG1) or
axis CAA V5 based numerical control ISO code for 5 axis CATIA – Prismatic Machining 2 (PMG) or
machines tools. CATIA – 3 Axis Surface Machining 2 (SMG)
or CATIA – Multi-Axis Surface Machining 2
(MMG)
CENIT AG CUT4AXES CAA Software to program and simulate Wire Any package including CATIA – Wireframe
Systemhaus V5 based EDM Machine tools integrated in CATIA V5. and Surface 1 (WS1) + CATIA – NC
Combines the expert functionality of a stand- Manufacturing Review 1 (NG1)
alone, technology-based programming with
the advantage of CATIA V5.
Metalsoft Inc. FabriWin CAA Expands the sheetmetal process Any package including CATIA – Sheetmetal
V5 based coverage, by generating CNC programs Design 1 (SH1)
for all CNC punch, laser, plasma and
combination machines.
Hitachi Zosen Space-E CAA NC programming for 3 axes surface Mechanical Design 2 (MD2) or any package
Information Systems V5 based CAM machining operation with advanced tool including these products
Add-on path editor capabilities and numerous Post
Processor to generated machine code. Well
suited for Asian/Pacific CAM requirements.
45
Infrastructure
Based on breath-taking technology and use of industry standards, CATIA V5
Infrastructure provides a uniquely scalable and open platform for collaborative
product development.
46 ibm.com/catia/catiav5r10/infrastructure
Products
CATIA – ENOVIA Work Package Exchange 1 (EW1) NEW CATIA – IGES Interface 1 (IG1)
Allows a subcontractor Helps users working in a
to load and work on a heterogeneous
CATIA Work Package CAD/CAM environment
extracted by the OEM to exchange data
from its ENOVIA through a neutral format.
context.
CATIA – PPR PDM Gateway 1 (PX1) NEW CATIA – STEP Core Interface 1 (ST1)
Provides a Allows users to
comprehensive interactively read and
Gateway Interface write data in STEP
between CATIA V5 AP214 and STEP AP203
and any PDM. data formats.
47
MultiCAx – PD Plug-in Product (PDL): Pro/ENGINEER Plug-in
MultiCAx – I Plug-in Product (DIL): I-DEAS Plug-in
MultiCAx – U Plug-in Product (DUL): Unigraphics Plug-in
MultiCAx – SolidWorks Plug-in Product (DSL): SolidWorks Plug-in
MultiCAx – SE Plug-in Product (DEL): SolidEdge Plug-in
MultiCAx – AD Plug-in Product (DAL): Autodesk Plug-in CATIA – Object Manager 2 (COM)
Provides the ability to Provides a uniquely
handle proprietary data scalable and open
from a large number of platform for
CAD formats in order to collaborative product
enable multiCAx design-
development which
in-context, visualise
multiCAx digital mock- combines the best of
up and to support the the current CATIA
management of product technologies with new
structures that include generation standards.
multiCAx data.
CATIA - ENOVIA Work Package Exchange 2 (EWE) NEW CATIA – Strim/Styler to CATIA Interface 2 (STC)
Allows an OEM to Allows CATIA V5 to
create a comprehensive process the geometry
CATIA V5 work from STRIM and
environment for a STYLER applications.
sub-contactor which is
not connected to the
OEM ENOVIA database.
48
CAA V5 software partners develop and sell V5 based applications fully integrated and complementary with the CATIA V5 portfolio.
T-Systems COM/VDAFS CAA Easily read and write VDAFS data to Any CATIA design configuration
ITS GmbH V5 based support in a simple way the exchange of 3D
geometric data and especially of sculptured
surfaces between various CAD systems.
ZEH Software ZEHServer CAA Is an infrastructure plotting and printing Any CATIA configuration
V5 based solution suitable for larger, potentially
heterogeneous, environments. It provides
connectivity to devices, centralised
management of plotters and printers, and
server-based processing.
49
Learning
CATIA and ENOVIA Web-based Learning Solutions (WLS)
CATIA Web-based Learning Solutions is a next generation, easy-to-use, Electronic
Performance Support System (EPSS) that provides from one source access to all the
information and training necessary to assure maximum productivity for the CATIA
and ENOVIA user community. Known as the Companion, its intention is to stay at
every user’s side, ready to answer any learning needs at any time. As such, the
Companion is an essential tool, allowing one to continuously enhance one’s skills
and knowledge, which is crucial to ensure optimum on-the-job performance.
Skillets can also be packaged in full-blown courses equally accessible via the
Companion desktop. Among them, the update courses provided with each new
release are an efficient way to keep the user community current with the products’
capabilities and thereby make the most efficient usage of CATIA and ENOVIA.
The tracking mechanism and icon-based codification allow the user to quickly
jump to the most relevant component while keeping a global view on the learning
resources actually reviewed. Furthermore, the Companion provides access to several
collaborative tools such as frequently asked questions, forums or e-mail to the
support desk or tutor.
Wide coverage
The CATIA WLS products family consists of:
• CATIA User Companion for Mechanical Design, which addresses the products
delivered with the CATIA Mechanical Design 2 (MD2) configuration #
• CATIA User Companion for Hybrid Design, which extends the previous product to
cover the CATIA Hybrid Design 2 (HD2) configuration
# Initially developed to cover CATIA P2 product, CATIA USER Companion for Mechanical Design has been
enhanced since Release 9 to cover P1 Platform. P2 exclusive learning component has been clearly marked.
50 ibm.com/catia/catiav5r10/learning
• User Companion for Digital Mock-Up covering the DMU Navigator 2, DMU Space
Analysis 2 and DMU Optimizer 2 products
• CATIA User Companion for V4 Mechanical Design covering the CATIA Solid Based
Design configuration. Moreover, this product offers to the CATIA V4 CBT users a
transition path to CATIA V5 WLS.
The WLS family also includes the ENOVIA User Companion for VPM which covers all
the key roles provided in ENOVIA VPM.
The Companion Studio promotes the development of sound learning objects around
the proven and robust instructional design model that is used by the WLS products,
while supporting a continuous improvement process around these objects.
51
RADE Products
Component Application Architecture (CAA) Version 5 and its Rapid Application
Development Environment (RADE) enables users to integrate their know-how into
specialised CATIA and ENOVIA applications. It also enables users to federate
their existing legacy system into ENOVIA 3D com. CAA V5 is rapidly becoming
the preferred development environment for companies willing to grow the 3d PLM
solutions portfolio.
Configurations
52 ibm.com/catia/catiav5r10/rade
CAA – Java Base Development (JDV)
The Java Base Development configuration is targeted for JAVA developers working in the
customization field of ENOVIA Portal 3d com allowing full code implementation.
LDC
TRC
Products
CAA – C++ API Documentation Generator (CDG) CAA – C++ Interactive Dashboard (CID)
Provides the capability to automatically generate C++ reference Provides developers with a single Rapid Application Development
documentation for CAA-based applications. Environment (RADE) for building UNIX and Windows platforms
C++ CAA V5 applications on CATIA and ENOVIA Version 5.
CAA – C++ Source Checker (CSC) CAA – C++ Unit Test Manager (CUT)
Facilitates test and quality control tasks critical to the efficient Facilitates test and quality control tasks critical to the efficient
development of quality software. It operates on the application development of quality software.
source code.
CAA – Data Model Customizer (DMC) CAA – Java Interactive Dashboard (JID)
Helps C++ developers to leverage the design critical phase of Provides developers with a single Rapid Application Development
CATIA V5 features and ENOVIA V5 LCA objects through UML Environment (RADE) for building Windows NT/2000 and UNIX Java
modelling techniques. Component Application Architecture (CAA) applications for the
ENOVIA 3d com product.
CAA – Java Unit Test Manager (JUT) CAA – Web Application Generator for Legacy Database (LWG)
Facilitates test and quality control tasks critical to the efficient Offers a consistent way to migrate corporate legacy data to
development of ENOVIA Solutions quality software. Internet-based technology.
CAA – Multi-Workspace Application Builder (MAB) CAA – Source Code Manager (SCM)
Delivers a consistent and integrated environment in which to compile, Enables IT organisations and software companies to manage and
link-edit and build a V5 application, using the same methods and tools streamline all coding source related information throughout the
that Dassault Systèmes uses to create its V5 products. application development lifecycle.
53
CATIA V5 configurations
CATIA Platform P1 product/configuration matrix
New in release 10
54
CATIA Platform P2 product/configuration matrix (continued)
New in release 10
-1 RT1 capabilities are provided by Photo Studio 2, which is included in the configuration.
55
CATIA V5 configurations (continued)
Mechanical Design
CONFIGURATION
Product Synthesis
Analysis
PRODUCTS
Mechanical Design Solutions TA3 SL3 AB3 AC3 KD3
GS1 CATIA Generative Shape Design •
ID1 CATIA Interactive Drafting 1 • •
ASD CATIA Assembly Design 2 • •
GDR CATIA Generative Drafting 2 • • •
PDG CATIA Part Design 2 •
ASL CATIA Aerospace Sheetmetal Design 3 •
Shape Design and Styling Solutions
RT1 Real Time Rendering 1 • •
GSD CATIA Generative Shape Design 2 •
RTR Real Time Rendering 2 •
ACA CATIA Automotive Class A 3 •
ABF CATIA Automotive Body in White Fastening 3 •
Product Synthesis Solutions
KE1 CATIA Knowledge Expert 1 • •
KWA CATIA Knowledge Advisor 2 •
KWE CATIA Knowledge Expert 2 •
PEO CATIA Product Engineering Optimizer 2 •
PKT CATIA Product Knowledge Definition 2 •
BKT CATIA Business Process Knowledge Template 3 •
Analysis Solutions
TAA CATIA Tolerance Analysis of Deformable Assembly 3 •
Infrastructure Solutions
CC1 CATIA CADAM Interface 1 • •
IG1 CATIA IGES Interface 1 • • •
ST1 CATIA STEP Core Interface 1 •
V4I CATIA V4 Integration 2 • • • • •
CO3 CATIA Object Manager 3 • • • • •
PRODUCTS CONFIGURATION
CATIA Complementary Solutions TDM
SMARTEAM – CATIA Integration •
SMARTEAM – Desktop Editor •
SMARTEAM – Foundation •
56
Learning V5 configurations
Learning product matrix V5R10
O Optional Shareable (5691) Enterprise (5795)
DMU Configuration
PRODUCTS
MDC DNC MDC DNC M4C
DKS Companion Desktop • • • • •
MDS CATIA – User Companion for Mechanical Design • •
DNS User Companion for DMU O • O •
HDS CATIA – User Companion for Hybrid Design O O
M4S CATIA – User Companion for V4 Mechanical Design •
RADE V5 configurations
CAA RADE product matrix V5R10
A Add-on
Application Building Configuration
Development Configuration
Development Configuration
Management Configuration
CAA – Java Development
Configuration
PRODUCTS
ABC CDC CDV JDV LDC TRC
CDG CAA – C++ API Documentation Generator • •
CID CAA – C++ Interactive Dashboard • •
CSC CAA – C++ Source Checker A • A A
CUT CAA – C++ Unit Test Manager A • A A
DMC CAA – Data Model Customizer • A
JID CAA – Java Interactive Dashboard •
JUT CAA – Java Unit Test Manager A A A
LWG CAA – Web Application Generator for Legacy Database •
MAB CAA – Multi-Workspace Application Builder • • • • • •
SCM CAA – Source Code Manager A A A A A
TRM CAA – Teamwork Release Manager •
57
Contents
Product Lifecycle Management ................................................ 2 CATIA – Reverse Engineering (RE2) ............................................. 18
CATIA V5 key messages ......................................................... 3 CATIA – Automotive Class A 3 (AC3)............................................ 18
CATIA Version 5 Release 10 .................................................... 4 CATIA – Automotive Body-in-White Design 3 (AB3)..................... 18
Flexible packaging ............................................................... 6 Products ......................................................................................... 19
CATIA – Freestyle Shaper 1 (FS1)................................................. 19
Mechanical Design ............................................................................8 CATIA – Generative Shape Design 1 (GS1).................................. 19
Configurations ..................................................................................9 Real Time Rendering 1 (RT1) ........................................................ 19
CATIA – Drafting 1 (DR1).................................................................9 CATIA – Digitized Shape Editor 2 (DSE) ....................................... 19
CATIA – Mechanical Design 1 (MD1)..............................................9 CATIA – Freestyle Sketch Tracer 2 (FSK)...................................... 19
CATIA – Mechanical Engineering (ME1) .........................................9 CATIA – Freestyle Optimizer 2 (FSO) ............................................ 19
CATIA – Sheetmetal Design 1 (SD1) ...............................................9 CATIA – Freestyle Profiler 2 (FSP) ................................................. 19
CATIA – Sheetmetal Production 1 (SL1)..........................................9 CATIA – Freestyle Shaper 2 (FSS) ................................................ 19
CATIA – Extended Mechanical Design 1 (XM1) .............................9 CATIA – Generative Shape Design 2 (GSD) .................................20
CATIA – Styled Mechanical Design 1 (YM1)................................. 10 CATIA – Generative Shape Optimizer 2 (GSO).............................20
CATIA – Core & Cavity Design 2 (CV2)......................................... 10 Photo Studio 2 (PHS) .....................................................................20
CATIA – Drawing Production 1 (DP2) ........................................... 10 Photo Studio Optimizer (PSO) .......................................................20
CATIA – Hybrid Design 2 (HD2).................................................... 10 CATIA – Quick Surface Reconstruction 2 (QSR) ..........................20
CATIA – Mechanical Design 2 (MD2) ........................................... 10 Real Time Rendering 2 (RTR)........................................................20
CATIA – Mechanical Engineering 2 (ME2).................................... 11 CATIA – Automotive Body-in-White Fastening 3 (ABF) ................20
CATIA – Mechanical Simulation 2 (MS2)....................................... 11 CATIA – Automotive Class A 3 (ACA) ...........................................20
CATIA – Sheetmetal Design 2 (SD2)............................................. 11 CATIA – Automotive Class A Optimizer 3 (ACO) .......................... 21
CATIA – Extended Mechanical Design 2 (XM2) ........................... 11 Software Partners Table................................................................. 21
CATIA – Styled Mechanical Design 2 (YM2) ................................ 12
CATIA – Aerospace Sheetmetal Design 3 (SL3) .......................... 12 Product synthesis................................................................ 22
Products ......................................................................................... 12 Configurations ................................................................................ 24
CATIA – Assembly Design 1 (AS1)................................................ 12 CATIA – Business Knowledge Process Definition 3 (KD3)........... 24
CATIA – Part Design Feature Recognition 1 (FR1) ....................... 12 Products ......................................................................................... 24
CATIA – 3D Functional Tolerancing and Annotation 1 (FT1) ........ 13 CATIA – Knowledge Expert 1 (KE1) .............................................. 24
CATIA – Generative Drafting 1 (GD1)............................................ 13 CATIA – Product Knowledge Template 1 (KT1) ............................ 24
CATIA – Healing Assistant 1 (HA1) ............................................... 13 CATIA – Business Process Knowledge Template 2 (BK2) ........... 24
CATIA – Interactive Drafting 1 (ID1) .............................................. 13 CATIA – Knowledge Advisor 2 (KWA)........................................... 24
CATIA – Mould Tooling Design 1 (MT1) ........................................ 13 CATIA – Knowledge Expert 2 (KWE) ............................................25
CATIA – Part Design 1 (PD1)......................................................... 13 CATIA – Product Engineering Optimizer 2 (PEO) .........................25
CATIA – Sheetmetal Production 1 (SH1) ....................................... 13 CATIA – Product Function Definition 2 (PFD)................................25
CATIA – Sheetmetal Design 1 (SM1)............................................. 13 CATIA – Product Function Optimizer 2 (PFO) ...............................25
CATIA – Weld Design 1 (WD1) ...................................................... 14 CATIA – Product Knowledge Template 2 (PKT)............................25
CATIA – Wireframe and Surface 1 (WS1)...................................... 14 CATIA – Business Process Knowledge Template 3 (BKT) ...........25
CATIA – Assembly Design 2 (ASD)............................................... 14 CATIA – DMU Navigator 1 (DN1) ..................................................25
CATIA – Core and Cavity Design 2 (CCV) .................................... 14 DMU Space Analysis 1 (SP1) ........................................................25
CATIA – 3D Functional Tolerancing and Annotation 2 (FTA)........ 14 DMU Engineering Analysis Review 2 (ANR) .................................26
CATIA – Generative Drafting 2 (GDR)........................................... 14 CATIA – DMU Navigator 2 (DMN) .................................................26
CATIA – Mould Tooling Design 2 (MTD) ....................................... 14 DMU Optimizer 2 (DMO) ...............................................................26
CATIA – Part Design 2 (PDG)........................................................ 14 DMU Fitting Simulator 2 (FIT) ........................................................26
CATIA – Sheetmetal Design 2 (SMD)............................................ 15 Human Activity Analysis 2 (HAA) ..................................................26
CATIA – Structure Design 2 (STD) ................................................ 15 Human Builder 2 (HBR) .................................................................26
CATIA – Aerospace Sheetmetal Design 3 (ASL) .......................... 15 Human Measurements Editor 2 (HME) .........................................26
Software Partners Table................................................................. 16 Human Posture Analysis 2 (HPA) ..................................................26
DMU Kinematics Simulator 2 (KIN) ...............................................27
Shape design and styling ...................................................... 17 CATIA – CATIA – DMU Space Analysis 2 (SPA) ...........................27
Configurations ................................................................................ 18 CATIA – DMU Space Engineering Assistant 2 (SPE) ...................27
CATIA – Freestyle Shaper 2 (FS2)................................................. 18 Software Partners Table.................................................................28
CATIA – Freestyle Optimizer (SO2) ............................................... 18
58
Equipment and Systems Engineering........................................ 29 NC Manufacturing................................................................ 41
Configurations ................................................................................30 Configurations ................................................................................42
CATIA – Systems Diagrams 2 (DI2) ..............................................30 CATIA – Machinist Review 1 (MR1) ...............................................42
CATIA – Electrical System Functional Definition 2 (EF2) ..............30 CATIA – Mould and Die Machinist 2 (MO2) ..................................42
CATIA – Electrical Wire Harness Installation 2 (EI2) .....................30 CATIA – Prismatic Machinist 2 (PM2)............................................42
CATIA – Electrical Signal Routing 2 (ER2) ....................................30 CATIA – Preparation Machinist 2 (RM2)........................................42
CATIA – Manufacturing Plant Layout (PL2)...................................30 Products .........................................................................................43
Products ......................................................................................... 31 CATIA – Lathe Machining 1 (LG1) .................................................43
CATIA – Electrical Harness Installation 1 (EH1)............................ 31 CATIA – NC Manufacturing Review 1 (NG1).................................43
CATIA – Electrical Library 1 (EL1) ................................................. 31 CATIA – Prismatic Machining 1 (PG1)...........................................43
CATIA – Circuit Board Design 2 (CBD)......................................... 31 CATIA – STL Rapid Prototyping 1 (TL1) ........................................43
CATIA – Electrical Cableway Routing 2 (ECR).............................. 31 CATIA – Advanced Machining 2 (AMG)........................................43
CATIA – Electrical System Functional Definition 2 (EFD).............. 31 CATIA – Lathe Machining 2 (LMG) ...............................................43
CATIA – Electrical Harness Flattening 2 (EHF)............................. 31 CATIA – Multi-Axis Surface Machining 2 (MMG)..........................43
CATIA – Electrical Harness Installation 2 (EHI)............................. 31 CATIA – NC Manufacturing Review 2 (NCG)................................43
CATIA – Electrical Library 2 (ELB) ................................................ 31 CATIA – NC Manufacturing Verification (NVG) .............................44
CATIA – Electrical Connectivity Diagrams 2 (ELD).......................32 CATIA – Prismatic Machining Preperation Assistant 2 (MPA) ......44
CATIA – Electrical Wire Routing 2 (EWR)......................................32 CATIA – Prismatic Machining 2 (PMG) .........................................44
CATIA – Piping and Instrumentation Diagrams 2 (PID) ................32 CATIA – 3-Axis Surface Machining 2 (SMG) ................................44
CATIA – Systems Diagrams 2 (SDI) ..............................................32 CATIA – STL Rapid Prototyping 2 (STL)........................................44
CATIA – Systems Space Reservation 2 (SSR)..............................32 Software Partners Table.................................................................45
CATIA – Systems Routing 2 (SRT) ................................................32
CATIA – Equipment Arrangement 2 (EQT)....................................32 Infrastructure ..................................................................... 46
CATIA – Hanger Design 2 (HGR)..................................................32 Products ......................................................................................... 47
CATIA – HVAC Design 2 (HVA) .....................................................33 CATIA – CADAM Interface 1 (CC1) ............................................... 47
CATIA – HVAC Diagrams 2 (HVD) ...............................................33 CATIA – Object Manager 1 (CO1)................................................. 47
CATIA – Equipment Support Structures (ESS)..............................33 CATIA – ENOVIA Work Package Exchange 1 (EW1).................... 47
CATIA – Piping Design 2 (PIP) ......................................................33 CATIA – IGES Interface 1 (IG1) ..................................................... 47
CATIA – Plant Layout 2 (PLO) ......................................................33 CATIA – PPR PDM Gateway 1 (PX1) ............................................. 47
CATIA – Raceway & Conduit Design 2 (RCD) ..............................33 CATIA – Step Core Interface 1 (ST1)............................................. 47
CATIA – Structure Functional Design 2 (SFD) ..............................33 CATIA – V4 Integration 1 (V41) ...................................................... 47
CATIA – Structure Preliminary Layout 2 (SPL) ..............................33 CATIA – COM 1 to 2 Extension (C12) ........................................... 47
CATIA – Tubing Design 2 (TUB)....................................................34 MULTICAx – Pro/ENGINEER Plug-In Product (PDL) ....................48
CATIA – Tubing Diagrams 2 (TUD) ...............................................34 MULTICAx – I-DEAS Plug-In Product (DIL) ..................................48
CATIA – Wave Guide Design 2 (WAV) ..........................................34 MULTICAx – Unigraphics Plug-In Product (DUL) .........................48
CATIA – Wave Guide Diagrams 2 (WGD) .....................................34 MULTICAx – SolidWorks Plug-In Product (DSL) ...........................48
Software Partners Table.................................................................34 MULTICAx – SolidEdge Plug-In Product (DEL) ............................48
MULTICAx – Autodesk Plug-In Product (DAL) .............................48
Analysis............................................................................ 35 CATIA – Object Manager 2 (COM) ...............................................48
Configurations ................................................................................36 CATIA – ENOVIA Work Package Exchange 2 (EWE) ...................48
CATIA Structural Analysis 2 (SA2) ................................................36 CATIA – Strim/Styler to CATIA Interface 2 (STC) ..........................48
CATIA Tolerance Analysis of Deformable Assembly 3 (TA3) .......36 CATIA – V4 Integration 2 (V4I) .......................................................48
Products .........................................................................................36 CATIA – Object Manager 3 (CO3) ................................................48
CATIA – Generative Part Structural Analysis 1 (GP1) ...................36 Software Partners Table.................................................................49
CATIA – Generative Assembly Structural Analysis 2 (GAS) .........36
CATIA – Generative Part Structural Analysis 2 (GPS)...................36 Learning ........................................................................... 50
CATIA – Elfini Structural Analysis 2 (EST) .....................................36 RADE Products ................................................................... 52
CATIA – FEM Surface 2 (FMS) ......................................................36 Configuration matrix ............................................................ 54
CATIA – Tolerance Analysis of Deformable Assembly 3 (TAA) ....36 Contents ........................................................................... 58
Software Partners Table.................................................................37 Contact information ............................................................. 60
59
ibm.com/solutions/plm
For more information
Note: The plus sign (+) indicates the international Other company, product and service names may
access code should be dialled before the country be trademarks, or service marks of others.
code. Numbers in parentheses, for example (0),
should only be dialled when calling from inside a References in this publication to IBM products,
country. programs or services do not imply that IBM
intends to make these available in all countries
in which IBM operates. Any reference to an
IBM product, program or service is not intended
to imply that only IBM’s product, program or
service may be used. Any functionally equivalent
product, program or service may be used
instead.
mailbox. Select your country and your language and subscribe at:
ibm.com/solutions/plm/newsletter
PLBEE01016 (09/02) SB
60