Professional Documents
Culture Documents
Infrastructure Solutions
AN-80i System
PTP & PMP
5 GHz Antenna Guide
70-00115-01-00 Proprietary Redline Communications © 2010 Page 1 of 18 February 16, 2010
BWI Infrastructure Solutions 5 GHz
AN-80i Ant. Guide
Copyright Information
All rights reserved February 16, 2010. The information in this document is proprietary to
Redline Communications Inc. This document may not in whole or in part be copied,
reproduced, or reduced to any medium without prior consent, in writing, from Redline
Communications Incorporated.
Contact Information:
Redline Communications Inc.
302 Town Centre Blvd. Suite 100
Markham, ON
Canada L3R 0E8
Web site: http://www.redlinecommunications.com
Sales Inquiries:
North American nainfo@redlinecommunications.com
Toll-free sales 1-866-633-6669
International intlinfo@redlinecommunications.com
Support: www.redlinecommunications.com/support/support_portal.html
Document Control:
70-00115-01-01-AN-80i_Antenna Guide_5_GHz-20100218a.doc
Disclaimer
The statements, configurations, technical data, and recommendations in this document
are believed to be accurate and reliable, but are presented without express or implied
warranty. Additionally, Redline makes no representations or warranties, either expressed
or implied, regarding the contents of this product. Redline Communications shall not be
liable for any misuse regarding this product. The information in this document is subject
to change without notice.
TABLE OF CONTENTS
1 Antenna Guide Overview....................................................................... 4
2 Antenna Specifications ......................................................................... 5
2.1 A2209MTFW ............................................................................................ 5
2.2 A2804MTFW ............................................................................................ 7
2.3 A2906PWP .............................................................................................. 9
2.4 A3204PWP ............................................................................................ 10
2.5 A3403RWP ............................................................................................ 11
2.6 A6017EAS ............................................................................................. 12
2.7 A9016EAS ............................................................................................. 13
2.8 A12015EAS ........................................................................................... 14
2.9 A36009MMO .......................................................................................... 15
3 Mounting Brackets............................................................................... 16
3.1 Heavy-Duty Mounting Kit ....................................................................... 16
3.2 Lightweight Mounting Kit ........................................................................ 16
3.3 AN-80i Stand-Alone Mounting Kit........................................................... 17
LIST OF FIGURES
Figure 1: A2209MTFW Antenna .......................................................................... 6
Figure 2: A2804MTFW Antenna .......................................................................... 8
Figure 3: A2906PWP Antenna ............................................................................. 9
Figure 4: A3204PWP Antenna ........................................................................... 10
Figure 5: A3403RWP Antenna .......................................................................... 11
Figure 6: A6017EAS Antenna ............................................................................ 12
Figure 7: A9016EAS Antenna ............................................................................ 13
Figure 8: A12015EAS Antenna .......................................................................... 14
Figure 9: A36009MMO Antenna ........................................................................ 15
Figure 10: 80i-HD-MNT Mounting Kit ................................................................. 16
Figure 11: 80i-LD-MNT Mounting Kit ................................................................. 16
Figure 12: 80i-SA-MNT Mounting Kit ................................................................. 17
Chapter
1
1 Antenna Guide Overview
The following sections provide technical details for all available antennas for the
RedACCESS and RedCONNEX broadband wireless products.
Important: Operation in the FWA band is subject to license. Use of some antennas
listed in this guide may not be allowed in your region (refer to product User
Manuals). Contact authorities in the country of installation for complete
information regarding the licensing regime and operating restrictions for that
regulatory domain.
Chapter
2
2 Antenna Specifications
2.1 A2209MTFW
Flat panel, one foot, 22 dBi, 9°, 4.9-5.875 GHz, vertical or horizontal polarization, PTP
Master/Slave or PMP subscriber antenna.
Redline part number 48-00071-00
Redline mounting bracket 80i-LW-MNT or 80i-HD-MNT
Electrical
Frequency range 4.9 – 5.875 GHz
Gain 21 dBi (min) @ 4.9 – 5.15 GHz
22 dBi (min) @ 5.15 – 5.875 GHz
VSWR 1.7 : 1 (max) 1.5 : 1 (typ)
3 db beamwidth: 9º (typ)
Polarization Linear ( Vertical or Horizontal )
Sidelobes level : ETSI EN 302 326 V1.1.2 (2006-03)
DN1-DN3
Cross polarization ETSI EN 302 326 V1.1.2 (2006-03)
DN1-DN3
F / b ratio - 35 dB (max)
Input impedance 50 ohm
Power 6W
Lightning protection DC Grounded
Mechanical
Dimensions ( l x w x d ) 305 x 305 x 15 mm (max)
Weight 1.2 kgs (max)
Connector N-Type Female
Base plate Aluminum with chemical conversion coating
Regulatory
Compliance ETSI EN 302 326 V1.1.2 (2006-03)
RoHS , CE 0682
2.2 A2804MTFW
Flat panel, two-foot, 28 dBi, 4.5°, 4.9-5.925 GHz, vertical or horizontal polarization, PTP
Master/Slave or PMP subscriber antenna.
Redline part number 48-00070-00
Redline mounting bracket 80i-HD-MOUNT
Electrical
Frequency range 4.9 – 5.925 GHz
Gain 27 dBi (min) @ 4.9 – 5.15 GHz
28 dBi (min) @ 5.15 – 5.875 GHz
27 dBi (min) @ 5.875 – 5.925 GHz
VSWR 2.0 : 1(max) @ 4.9 – 5.15 GHz
1.7 : 1 (max) @ 5.15 – 5.875 GHz
2.0 : 1 (max) @ 5.875 – 5.925 GHz
3 db beamwidth: 4.5º (typ)
Polarization Linear ( Vertical or Horizontal )
Sidelobes level : ETSI EN 302 085 V1.2.2 ( 2003-08 ) Range 1,
TS1-TS5
Cross polarization ETSI EN 302 085 V1.2.2 ( 2003-08 ) Range 1,
TS1-TS5
F / b ratio - 40 dB (max)
Input impedance 50 (ohm)
Power 6W
Lightning protection DC Grounded
Mechanical
Dimensions ( l x w x d ) 600 x 600 x 51 mm (max)
Weight 5 (kgs) (max)
Connector N-Type Female
Base plate Aluminum with chemical conversion coating
Outline drawing RD42772700C
Regulatory
Compliance ETSI EN 302 085 V1.2.2 (2003-08)
RoHS , CE 0682
2.3 A2906PWP
Parabolic 29 dBi, 6°, 4.900-5.875 GHz, PTP Master/Slave or PMP subscriber antenna.
Redline part number 48-00063-00
Redline mounting bracket 80i-SA-MNT
Electrical
Frequency range 4.900-5.875 GHz (SINGLE POL.)
5.150-5.850 GHz (DUAL POL. )
Gain 29 dBi
Impedance 50 OHM
Max. Power 100 W
Beam width 6°
Dimensions 648 mm (25.5 in) diameter
Weight 5 kg (11 lb)
VSWR 1.5:1 (SINGLE POL.)
1.8:1 (DUAL POL.)
Regulatory
Compliance ETSI EN 301 126-3-2 V1.1.1 (2001-03).
Mechanical
Connector N - Type
Mechanical downtilt 30°
Pole diameter (od) 50-101.6 mm (2-4 in)
Operating temperature -40 to 70 C
Sidelobes -32 dB
Front to back -32 dB
Cross pole -32 dB
Wind loading 51 Kg (113 lbs) @ 160 km/h (100 mph)
80 Kg (177 lbs) @ 200 km/h (125 mph)
2.4 A3204PWP
Parabolic 32 dBi, 4°, 4.900-5.875 GHz, PTP Master/Slave or PMP Subscriber Antenna.
Redline part number 48-00064-00
Redline mounting bracket 80i-SA-MNT
Electrical
Frequency range 4.900-5.875 GHz (SINGLE POL.)
5.150-5.850 GHz (DUAL POL. )
Gain 32 dBi
Impedance 50 OHM
Max. Power 100 W
Beam width 4°
Dimensions (diameter) 927 mm (36.5 in)
Weight 10 Kg (22 lb)
Regulatory
Compliance ETSI EN 301 126-3-2 V1.1.1 (2001-03).
Mechanical
Connector N - Type
VSWR (single pol.) 1.5:1
VSWR (dual pol.) 1.8:1
Mechanical downtilt 30°
Pole diameter (od) 50 - 101.6 mm (2 - 4 in)
Operating temperature -40 to 70 C
Sidelobes -32 dB
Front to back -38 dB
Cross pole -34 dB
Wind loading (lbs.) 116 Kg (256 lbs) @ 160 Km/h (100 mph)
181 Kg (400 lbs) @ 200 km/h (125 mph)
2.5 A3403RWP
Parabolic 34 dBi, 3.4°, 5.250-5.850 GHz, PTP Master/Slave or PMP Subscriber Antenna.
Redline part number 48-00033-00
Redline mounting bracket 80i-SA-MNT
Electrical
Frequency range 5.25 - 5.85 GHz
Gain 34.6 dBi
Impedance 50 Ohm
Beamwidth 3.4° (typ.)
Dimensions 1200 mm (48 in)
Weight 6.8 kg (15 lb) max.
Mechanical
Connector N-Type
Polarization Single
VSWR 1.5:1 (max) (R.L. 14 dB)
Cross polarization -30 dB (max)
F/b ratio -42 dB (max)
2.6 A6017EAS
Flat panel 17.5 dBi, 62°, 4.9-5.9 GHz, vertical polarization, PMP base station antenna.
Redline part number 48-00067-00
Redline mounting bracket 80i-HD-MNT
Electrical
Frequency range 4.9 - 5.9 GHz
Gain 17.5 dBi Peak
Impedance 50 Ohm
Max. Power 30 W
Beamwidth 62° (Az.) x 6.5° (El.) Approx.
Dimensions 650 x 200 x 101 mm (25.6 x 7.87 x 3.98 in)
Weight 5 Kg (11.0 lbs)
Regulatory compliance ETSI EN 302 085 V1.2.2 CLASS CS 2
Polarization Linear (Vertical)
Cross polarization >20 dB
Regulatory
Compliance ETSI EN 302 085 V1.2.2 CLASS CS 2
Mechanical
VSWR 2 : 1 Max,. 1.5 : 1 typ.
Electrical tilt 2°
Front to back >40 dB
Temperature –40 to 60 C
Wind loading 21.1 Kg (46.4 lbs) @ 160 km/h (100 mph)
Finish Grey RAL 7035
2.7 A9016EAS
Flat panel 16.6 dBi, 90°, 4.9-5.9 GHz, PMP base station antenna.
Redline part number 48-00066-00
Redline mounting bracket 80i-HD-MNT
Electrical
Frequency range 4.9 - 5.9 GHz
Gain 16.6 dBi Peak
Impedance 50 Ohm
Max. Power 30 W
Beamwidth 90° Azimuth
6.5° Elevation
Dimensions 650 x 200 x 101 mm (25.6 x 7.87 x 3.98 in)
Weight 5 Kg (11.0 lbs)
Regulatory
Compliance ETSI EN 302 085 V1.2.2 CLASS CS 2
Mechanical
Connector N - Type
Polarization Linear (Vertical)
VSWR 2 : 1 Max,. 1.5 : 1 typ.
Cross polarization >20 dB
Electrical tilt 2°
Front to back >40 dB
Temperature -40 to 60 C
Wind loading 21.1 Kg (46.4 lbs) @ 160 km/h (100 mph)
Finish Grey RAL 7035
2.8 A12015EAS
Flat panel 15 dBi, 120°, 4.9-5.9 GHz, vertical polarization, PMP base station antenna.
Redline part number 48-00065-00
Redline mounting bracket 80i-HD-MNT
Electrical
Frequency range 4.9 - 5.9 GHz
Gain 15 dBi Peak
Impedance 50 Ohm
Max. Power 30 W
Beamwidth 120° Azimuth (approx.)
6.5° Elevation (approx.)
Dimensions 650 x 200 x 101 mm (25.6 x 7.87 x 3.98 in)
Weight 5 Kg (11.0 lbs)
Regulatory
Compliance ETSI EN 302 085 V1.2.2 CLASS CS 2
Mechanical
Connector N - Type
Polarization Linear (Vertical)
VSWR 2 : 1 Max., 1.5 : 1 typical
Cross polarization >20 dB
Electrical tilt 2°
Front to back >25 dB
Temperature -40 to 60 C
Wind loading 21.1 Kg (46.4 lbs) @ 160 km/h (100 mph)
Finish Grey RAL 7035
2.9 A36009MMO
Omni-directional 9 dBi, 360°, 5.0-6.0 GHz, PMP base station antenna.
Redline part number 48-00048-01
Redline mounting bracket 80i-SA-MNT
Electrical
Frequency range 5.0 - 6.0 GHz
Gain 9 dBi
Impedance 50 Ohm
Max power 25 Watts
o
Beamwidth (eco9) 360 Azimuth
o
14 Elevation
Mechanical
Dimensions (height) 381 x 17 mm (15 x 0.65 in)
Radome: 23 mm 0.9 in) at the base
Weight < 0.34 Kg (0.75 lbs)
Lightning protection External recommended
Max wind velocity 160 km/h (100 mph)
Material White fiberglass
Mounting Pole or surface mount, mounts up to 50 mm (2
in)
Connector N - Type (direct)
Chapter
3
3 Mounting Brackets
3.1 Heavy-Duty Mounting Kit