Professional Documents
Culture Documents
Preferred Device
3 Watt Plastic
Surface Mount
Zener Voltage Regulators
This complete new line of 3 Watt Zener diodes offers the following
advantages. http://onsemi.com
Features
PLASTIC SURFACE MOUNT
• Zener Voltage Range − 3.3 V to 200 V
ZENER VOLTAGE
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Flat Handling Surface for Accurate Placement
REGULATOR DIODES
• Package Design for Top Side or Bottom Circuit Board Mounting 3.3−200 V, 3 W DC POWER
• Pb−Free Packages are Available
MAXIMUM RATINGS
Rating Symbol Value Unit AYWW
9xxB G
Maximum Steady State Power G
Dissipation @ TL = 75°C PD 3.0 W
Measured at Zero Lead Length
Derate Above 75°C 40 mW/°C A = Assembly Location
RqJL 25 °C/W Y = Year
Thermal Resistance from Junction−to−Lead
WW = Work Week
Maximum Steady State Power Dissipation PD 550 mW 9xxB = Device Code (Refer to page 3)
@ TA = 25°C (Note ) G = Pb−Free Package
Derate Above 25°C 4.4 mW/°C (Note: Microdot may be in either location)
Thermal Resistance from Junction−to−Ambient RqJA 226 °C/W
Operating and Storage Temperature Range TJ, Tstg −65 to °C ORDERING INFORMATION
+150
Device Package Shipping †
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended 1SMB59xxBT3 SMB 2500/Tape & Reel
Operating Conditions is not implied. Extended exposure to stresses above the 1SMB59xxBT3G SMB 2500/Tape & Reel
Recommended Operating Conditions may affect device reliability.
(Pb−Free)
1. FR−4 board, using recommended footprint.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
ELECTRICAL CHARACTERISTICS
(TL = 30°C unless otherwise noted,
VF = 1.5 V Max. @ IF = 200 mA(dc) for all types)
I
Symbol Parameter
IF
VZ Reverse Zener Voltage @ IZT
IZT Reverse Current
ZZT Maximum Zener Impedance @ IZT
IZK Reverse Current VZ VR
V
ZZK Maximum Zener Impedance @ IZK IR VF
IZT
IR Reverse Leakage Current @ VR
VR Reverse Voltage
IF Forward Current
VF Forward Voltage @ IF
IZM Maximum DC Zener Current Zener Voltage Regulator
http://onsemi.com
2
1SMB5913BT3 Series
ELECTRICAL CHARACTERISTICS (Devices listed in bold, italic are ON Semiconductor Preferred devices.)
(TL = 30°C unless otherwise noted, VF = 1.5 V Max. @ IF = 200 mA(dc) for all types)
http://onsemi.com
3
1SMB5913BT3 Series
6
P D , MAXIMUM POWER DISSIPATION (WATTS) 1K
2 50
30
1
20
TA
0 10
0 25 50 75 100 125 150 0.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 100
T, TEMPERATURE (°C) PW, PULSE WIDTH (ms)
10 200
θVZ , TEMPERATURE COEFFICIENT (mV/° C)
2
30
0
20
−2
−4 10
2 4 6 8 10 12 10 20 30 50 70 100 200
VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)
100 100
50 50
IZT, REVERSE CURRENT (mA)
30 30
20 20
10 10
5 5
3 3
2 2
1 1
0.5 0.5
0.3 0.3
0.2 0.2
0.1 0.1
0 1 2 3 4 5 6 7 8 9 10 0 10 20 30 40 50 60 70 80 90 100
VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)
http://onsemi.com
4
1SMB5913BT3 Series
200 1k
IZ(dc) = 1mA TJ = 25°C
500
100
Z Z , DYNAMIC IMPEDANCE (OHMS)
iZ(rms) = 0.1 IZ(dc)
1000 10
NONREPETITIVE, EXPONENTIAL
MEASURED @ PULSE WAVEFORM, TJ = 25°C
Ppk , PEAK POWER (kW)
ZERO BIAS
C, CAPACITANCE (pF)
1
MEASURED @
100 VZ/2
0.1
TJ = 25°C
10 0.01
10 100 0.01 0.1 1 10
BREAKDOWN VOLTAGE (VOLTS) TP, PULSE WIDTH (ms)
120 120
TA = 25°C
≤ 10 ms 8/20 ms WAVEFORM
PW (ID) IS DEFINED AS THE
Ippm, PEAK PULSE CURRENT (%)
80 Ippm 80
CURRENT (%)
40 40
10/1000 ms WAVEFORM
AS DEFINED BY R.E.A.
20 20
td
0.1 IPEAK T = 8 ms
0 0
0 1 2 3 4 5 0 0.02 0.04 0.06 0.08 0.1
t, TIME (ms) T t, TIME (ms)
20 ms
Figure 11. Pulse Waveform Figure 12. Pulse Waveform
http://onsemi.com
5
1SMB5913BT3 Series
PACKAGE DIMENSIONS
SMB
CASE 403A−03
ISSUE E
HE NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
E 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P.
MILLIMETERS INCHES
DIM MIN NOM MAX MIN NOM MAX
A 1.90 2.13 2.41 0.075 0.084 0.095
A1 0.05 0.10 0.15 0.002 0.004 0.006
b D b 1.96 2.03 2.11 0.077 0.080 0.083
c 0.15 0.23 0.30 0.006 0.009 0.012
D 3.30 3.56 3.81 0.130 0.140 0.150
E 4.06 4.32 4.57 0.160 0.170 0.180
HE 5.21 5.44 5.59 0.205 0.214 0.220
L 0.76 1.02 1.27 0.030 0.040 0.050
L1 0.51 REF 0.020 REF
A1
L L1 c
SOLDERING FOOTPRINT*
2.261
0.089
2.743
0.108
2.159
0.085
SCALE 8:1 ǒinches
mm Ǔ
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com 1SMB5913BT3/D
6