Professional Documents
Culture Documents
Consultix WTX‐05 Test Transmitter
Portable WCDMA/CW Coverage Test Transmitter
The need
Mobile operators are always in need to deliver
greater capacity while keeping minimum
financial and technical risks in the roll out of
their mobile networks and while maintaining
the quality of service target set.
More accurate base station site planning and
optimization are big arms in fulfilling the A.M.
needs.
Moreover, the problem of choosing the
optimum location of base stations in a
microcell communications system is quite
different; the factors affecting optimum
selection are non‐uniform service area in
Best Accuracy 0.5dB
complex propagation environment, mutual
coverage and interference of multiple base WCDMA and CW models
stations.
WCDMA 3GPP Scanners compatible
The cost and network complexity of microcell
communications systems is strongly Allows Noise/Carrier pollution test
dependent on the number of base stations
Memory Channels
required to achieve the operator’s service
objectives. There is consequently a strong Light weight
incentive to develop system planning tools
and planning aids which can be used to Ergonomic user interface
minimize the number and optimize the
Functional keypad
location of the system base stations.
LCD display
8 Masr Lel‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt
Tel:+20105006238 Fax: +20222670535 www.consultix‐egypt.com
Consultix WTX‐05 Test Transmitter
Consultix Others used heavy weight and expensive
Introduced the right tool in the right time with general purpose laboratory signal generators
the WTX‐05 family; the tool is magnificently in CW or WCDMA mode.
accurate, lightweight, compact, operated with
The later solution is deficient cause it doesn’t
ergonomic man‐machine‐interface, modular in allow testing the noise/carrier pollution from
design , S/W and H/W upgradeable to save outside cells on the used scrambling codes,
user’s investments and enhance user’s logistics besides, bulky, and doesn’t give the required
cycle. RF power which might be beyond its limits .
WTX‐05 comes in two different versions; the Current Market Requirements
WTX‐05C which provides CW operation only, Handheld; the need for small size
and the WTX‐05W which provides WCDMA handheld transmitter is due to the need for
modulation as well as CW operation. easy fixation on a mast or tower, faster
mission accomplishment, health care about
Applications employees and low ability to field accidents
*TX for Propagation model tuning, base station
site evaluation, and indoor coverage Ergonomic design and user friendly
enhancement. interface allow for convenience of the
operator, and prevents frequent mistakes
* General purpose signal generator for especially when non‐expert uses the tool.
calibrating /testing BTS receivers and amplifiers
Accuracy is always a key factor to
Who needs it? ensure proper modeling, hence, more
Mobile operators, integrators, Telecom accurate site choice.
Vendors, sub‐contractors, tower site providers,
WCDMA signal allows testing
consultants, and infrastructure providers.
noise/carrier pollution with the effect of
History: Indoor 3G modeling outside cells on the indoor scrambling codes
Some users utilize their legacy assets like old Modulated signal allows in‐depth
GSM1800MHZ test transmitters for modeling testing with commercially available variety of
UMTS 2100 MHz ‐as it is a close frequency radio scanners and handheld coverage tools.
band‐.However, such transmitters are being
discontinued worldwide. Versatility/Upgradeability are
aspects to save user investments by allowing
Some others employ bulky outdoor test altering the device features and capabilities to
transmitters. cope with future applications, needs, and
technologies.
8 Masr Lel‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt
Tel:+20105006238 Fax: +20222670535 www.consultix‐egypt.com
Consultix WTX‐05 Test Transmitter
Specifications:
RF Characteristics
Internal Frequency Accuracy: 1.1 ppm. Typ. 1 ppm
Frequenc Ranges: 2110 to 2170 MHz
Frequency Step: 200 KHz
Modulation CW or 3GPP WCDMA(WTX-05W models only)
Max. Transmit Power (Continuous wave): 27 dBm
Max. Transmit Power (WCDMA): 15 dBm
Power Control Range(Continuous Wave): -10 to 27 dBm
Power Control Range(WCDMA): -10 to 15 dBm
Power stability: ±0.5 dB
Power Accuracy: ±0.5 dB
Off Transmit Power: -100 dBm
Non-Harmonic spurious -40 dBc
Scrambling Code: 0 to 511
RF output 50 ohm TNC Female (TNC-SMA adapter included)
Power supply
Input Power: 9 to 14 VDC
Power Consumption: 14 Watts. Typ. 12 Watts
Charger 220V AC, 50 Hz. 12 V Car Charger
DC Input Power Jack 2.1mm ID 5.5mm OD
Battery standby time 450 mins. Typ. 500 mins
Battery @ continuous maximum output power 105 mins. Typ. 120 mins
Physical
External Dimensions: L220 x W116 x H51mm
Weight: 750gm
Operating Temp: -10 to +55 C
Standard package Transmitter, Charger, duck antenna, TNC-SMA
adapter, 3m RF Cable (SMA-SMA male), carrying
bag.
Ordering information
Transmitter package P1 (CW) WTX-05C
Transmitter package P2 (WCDMA/CW) WTX-05W
Ruggedized Carrying Case WTX-05-RC
3m RF cable (SMA Male to SMA Male) WTX-05-CSS
SMA female to N-Type Male adapter WTX-05-ASN
Spare battery pack WTX-05-BP
Spare antenna WTX-05-A
Spare charger WTX-05-C
Spare TNC-SMA adapter WTX-05-ATS
Car charger WTX-05-CC
8 Masr Lel‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt
Tel:+20105006238 Fax: +20222670535 www.consultix‐egypt.com