Professional Documents
Culture Documents
Your Home
For repair – in your home – of all major brand appliances,
ROTARY LAWN MOWER
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
173cc Kohler Engine
For the replacement parts, accessories and Power-Propelled
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances 21" Multi-Cut
and items like garage door openers and water heaters.
1-800-4-MY-HOME® Anytime, day or night
(1-800-469-4663) (U.S.A. and Canada) Model No.
www.sears.com www.sears.ca
917.374142
Product No.
Our Home
For repair of carry-in products like vacuums, lawn equipment, 7021RD
and electronics, call or go on-line for the nearest
Sears Parts and Repair Center.
1-800-488-1222 Anytime, day or night (U.S.A. only)
www.sears.com
CAUTION:
© Sears Brands, LLC
Read and follow all
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC Safety Rules and Instructions
MC
Marque de commerce / MD Marque déposée de Sears Brands, LLC before operating this equipment
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.sears.com/craftsman
432806 04.08.10 BY Printed in U.S.A.
KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3225-EA
TABLE OF CONTENTS
Safety Rules ..........................................2-3 Maintenance ......................................12-15
Warranty ...................................................4 Service and Adjustments...................15-16
Product Specifications ..............................5 Storage ..............................................17-18
Assembly / Pre-Operation ........................6 Troubleshooting .................................18-19
Operation............................................. 7-11 Repair Parts.......................................38-47
Maintenance Schedule ...........................12
SAFETY RULES
IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing ob-
jects. Failure to observe the following safety instructions could result in serious injury or death.
Look for this symbol to point out im- • Do not operate the mower when bare-
portant safety precautions. It means foot or wearing open sandals. Always
CAUTION!!! BECOME ALERT!!! wear substantial foot wear.
YOUR SAFETY IS INVOLVED. • Do not pull mower backwards unless abso-
WARNING: In order to prevent accidental lutely necessary. Always look down and be-
starting when setting up, transporting, ad- hind before and while moving backwards.
justing or making repairs, always disconnect • Never direct discharged material toward
spark plug wire and place wire where it cannot anyone. Avoid discharging material
come in contact with plug. against a wall or obstruction. Material may FUEL SYSTEM EXHAUST
WARNING: Engine exhaust, some of its richochet back toward the operator. Stop PART NO. QTY DESCRIPTION PART NO. QTY DESCRIPTION
constituents, and certain vehicle compo- the blade when crossing gravel surfaces. 14 065 22-S 1 Tank, Fuel (Xenoy) 14 068 05-S 1 Muffler Assembly
nents contain or emit chemicals known to • Do not operate the mower without prop- 24 086 12-S 2 Screw 14 314 04-S 1 Guard Assembly, Muffler
the State of California to cause cancer and er guards, plates, grass catcher or other 14 227 07-S 1 Cap Assembly, Fuel 14 041 22-S 1 Gasket,muffler
birth defects or other reproductive harm. safety protective devices in place. (EVAP, Canister) 14 100 09-S 2 Nut, Hex, Flangelock (M6)
WARNING: Battery posts, terminals and • See manufacturer’s instructions for 25 111 40-S 2 Hose, Fuel
related accessories contain lead and lead proper operation and installation of (Low Permeation) ENGINE CONTROLS
compounds, chemicals known to the State accessories. Only use accessories ap- 14 237 01-S 4 Clamp, Hose PART NO. QTY DESCRIPTION
of California to cause cancer and birth proved by the manufacturer. 14 112 13-S 1 Spacer, Carburetor 14 154 01-S 1 Clip, Governor Arm
defects or other reproductive harm. Wash • Stop the blade(s) when crossing gravel 14 187 01-S 1 Arm Assembly 14 079 17-S 1 Linkage, Auto Choke
hands after handling. drives, walks, or roads.
25 086 277-S 2 Screw, Thread Forming, M4 14 126 22-S 1 Control Assembly,
CAUTION: Muffler and other engine • Stop the engine (motor) whenever you
14 853 17-S 1 Carburetor, Auto Choke Fixed Speed
parts become extremely leave the equipment, before cleaning
the mower or unclogging the chute. (-B, without Shutoff) 14 089 14-S 1 Spring, Extension
hot during operation and 14 268 04-S 1 Diaphragm Assembly (Governor)
remain hot after engine • Shut the engine (motor) off and wait
until the blade comes to complete stop 25 086 275-S 2 Screw, Shoulder 14 089 07-S 1 Spring, Linkage
has stopped. To avoid 14 090 12-S 1 Lever, Governor
severe burns on contact, before removing grass catcher.
• Mow only in daylight or good artificial light. 25 086 166-S 1 Screw, Retangle Head (M6)
stay away from these areas. 25 086 159-S 2 Screw, Hex Flange (M6)
• Do not operate the machine while under
I. GENERAL OPERATION the influence of alcohol or drugs.
• Read, understand, and follow all • Never operate machine in wet grass.
instructions on the machine and in the Always be sure of your footing: keep a
manual(s) before starting. Be thoroughly firm hold on the handle; walk, never run.
familiar with the controls and the proper • Disengage the self-propelled mech-
use of the machine before starting. anism or drive clutch on mowers so
• Do not put hands or feet near or under equipped before starting the engine.
rotating parts. Keep clear of the dis- • If the equipment should start to vibrate
charge opening at all times. abnormally, stop the engine (motor) and
• Only allow responsible individuals, who check immediately for the cause. Vibra-
are familiar with the instructions, to tion is generally a warning of trouble.
operate the machine. • Always wear safety goggles or safety glass-
• Clear the area of objects such as rocks, es with side shields when operating mower.
toys, wire, bones, sticks, etc., which could II. SLOPE OPERATION
be picked up and thrown by blade. Slopes are a major factor related to slip &
• Be sure the area is clear of other people fall accidents which can result in severe
before mowing. Stop the machine if injury. All slopes require extra caution. If
anyone enters the area.
2 you feel uneasy on a slope, do not mow it. 47
KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3225-EA DO: • Never fill containers inside a vehicle, on
• Mow across the face of slopes: never a truck or trailer bed with a plastic liner.
up and down. Exercise extreme caution Always place containers on the ground
when changing direction on slopes. away from your vehicle before filling.
• Remove obstacles such as rocks, tree • Remove gas-powered equipment from the
FUEL SYSTEM 14 065 12-S 14 227 04-S limbs, etc. truck or trailer and refuel it on the ground. If
14 065 24-S 14 227 11-S
• Watch for holes, ruts, or bumps. Tall this is not possible, then refuel such equip-
14 326 05-S
grass can hide obstacles. ment with a portable container, rather than
14 154 04-S
DO NOT: from a gasoline dispenser nozzle.
• Keep the nozzle in contact with the rim
• Do not trim near drop-offs, ditches or
of the fuel tank or container opening at
embankments. The operator could lose
all times until fueling is complete. Do
USE 14 065 24-S footing or balance.
not use a nozzle lock-open device.
14 163 01-S 14 065 01-S • Do not trim excessively steep slopes.
14 065 08-S 14 050 14-S 14 089 07-S • If fuel is spilled on clothing, change
14 065 10-S • Do not mow on wet grass. Reduced
14 173 06-S 14 227 06-S 14 227 04-S clothing immediately.
14 050 13-S 14 237 04-S footing could cause slipping.
14 313 04-S
14 237 07-S 14 079 01-S • Never overfill fuel tank. Replace gas
14 126 14-S
14 462 01-S
III. CHILDREN cap and tighten securely.
14 126 18-S
Tragic accidents can occur if the operator is V. GENERAL SERVICE
not alert to the presence of children. Children
14 090 04-S • Never run machine inside a closed area.
14 326 06-S 14 126 16-S 14 090 12-S are often attracted to the machine and the
• Never make adjustments or repairs with
25 086 166-S mowing activity. Never assume that children
14 237 03-S M-641060-S the engine (motor) running. Disconnect the
M-641060-S 14 050 16-S will remain where you last saw them.
14 050 04-S
25 111 40-S
25 111 34-S spark plug wire, and keep the wire away
EXHAUST • Keep children out of the trimming area
14 126 11-S from the plug to prevent accidental starting.
14 237 03-S 14 126 22-S and under the watchful care of another
14 237 01-S 14 237 04-S • Keep nuts and bolts, especially blade
25 111 40-S 14 237 07-S responsible adult.
25 050 07-S 14 089 attachment bolts, tight and keep equip-
25 086 277-S • Be alert and turn machine off if children
33-S ment in good condition.
14 237 01-S enter the area.
25 086 275-S • Never tamper with safety devices.
14 187 01-S 14 079 17-S • Before and while walking backwards,
14 187 03-S 14 089 14-S Check their proper operation regularly.
M-641060-S 14 089 05-S 14 079 02-S look behind and down for small children.
14 237 05-S 14 089 32-S • Keep machine free of grass, leaves, or
14 089 34-S
14 079 04-S • Never allow children to operate machine.
14 268 04-S
14 079 15-S other debris build-up. Clean oil or fuel spill-
• Use extra care when approaching blind
14 227 07-S age. Allow machine to cool before storing.
14 112 09-S corners, shrubs, trees, or other objects
14 112 13-S
• Stop and inspect the equipment if you
that may obscure vision.
14 041 05-S
strike an object. Repair, if necessary,
HEAD/VALVE
BREATHER 14 041 24-S
14 536 03-S
IV. SAFE HANDLING OF GASOLINE before restarting.
24 072 06-S 14 536 06-S
14 853 01-S
Use extreme care in handling gasoline. • Never attempt to make wheel height
14 065 22-S 14 853 02-S
14 853 05-S Gasoline is extremely flammable and the adjustments while the engine is running.
14 853 26-S 14 853 22-S
14 853 23-S 14 853 24-S vapors are explosive. • Grass catcher components are subject to
14 853 25-S
14 853 15-S
14 853 27-S
14 853 17-S 14 237 05-S • Extinguish all cigarettes, cigars, pipes wear, damage, and deterioration, which
and other sources of ignition. could expose moving parts or allow objects
25 086 165-S • Use only an approved container. to be thrown. Frequently check compo-
14 100 09-S 14 314 04-S EXHAUST
14 314 09-S • Never remove gas cap or add fuel with nents and replace with manufacturer’s
14 536 07-S
14 536 08-S the engine running. Allow engine to recommended parts, when necessary.
14 068 01-S cool before refueling. • Mower blades are sharp and can cut.
14 068 05-S
14 068 07-S • Never refuel the machine indoors. Wrap the blade(s) or wear gloves, and
14 068 08-S • Never store the machine or fuel contain- use extra caution when servicing them.
er where there is an open flame, spark • Do not change the engine governor set-
14 041 22-S or pilot light such as a water heater or ting or overspeed the engine.
on other appliances. • Maintain or replace safety and instruc-
14 536 14-S tion labels, as necessary.
HEAD/
VALVE/ 14 536 13-S
WARNING: This lawn mower is equipped with an internal combustion engine and
BREATHER 14 536 12-S
should not be used on or near any unimproved forest-covered, brush-covered or
grass-covered land unless the engine’s exhaust system is equipped with a spark
24 072 06-S 14 536 11-S
ENGINE CONTROLS arrester meeting applicable local or state laws (if any). If a spark arrester is used, it
should be maintained in effective working order by the operator.
In the state of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal
lands. A spark arrester for the muffler is available through your nearest Husqvarna or
other authorized service center (See the REPAIR PARTS section of this manual).
46 3
KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3225-EA
WARRANTY
SECTION 1: LIMITED WARRANTY (4) Additional damage to parts or components due to
Husqvarna Forest & Garden Company (“Husqvarna”) continued use occurring after any of the above.
warrants Husqvarna product to the original purchaser
REPAIR OR REPLACEMENT AS PROVIDED UNDER
to be free from defects in material and workmanship
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF
from the date of purchase for the “Warranty Period” of
THE PURCHASER. HUSQVARNA SHALL NOT BE
the product as set forth below:
LIABLE FOR ANY INCIDENTAL OR CONSEQUEN-
2 YEAR NON-COMMERCIAL WARRANTY: Auto- TIAL DAMAGES FOR BREACH OF ANY EXPRESS
matic Mower, Riding lawn mowers, yard and garden OR IMPLIED WARRANTY ON THESE PRODUCTS
tractors, walk behind mowers, tillers, chain saws, EXCEPT TO THE EXTENT PROHIBITED BY AP-
trimmers, brushcutters, clearing saws, snow blowers, PLICABLE LAW. ANY IMPLIED WARRANTY OF
handheld blowers, backpack blowers, hedge trimmers, MERCHANTABILITY OR FITNESS FOR A PARTICU-
electrical products and power-assist collection systems LAR PURPOSE ON THESE PRODUCTS IS LIMITED
for noncommercial, nonprofessional, noninstitutional or IN DURATION TO THE WARRANTY PERIOD AS
nonincome producing use, except as herein stated. DEFINED IN THE LIMITED WARRANTY STATE-
MENT. HUSQVARNA RESERVES THE RIGHT TO
Emission control system components necessary to
CHANGE OR IMPROVE THE DESIGN OF THE
comply with CARB-TIER-II and EPA regulations.
PRODUCT WITHOUT NOTICE, AND DOES NOT
Husqvarna Safety Apparel carries a 90-day warranty ASSUME OBLIGATION TO UPDATE PREVIOUSLY
from the date of the customer’s original purchase for MANUFACTURED PRODUCTS.
defects in material and workmanship. Normal wear,
Some states do not allow the exclusion of incidental
tear or abuse is not covered under warranty. Product
or consequential damages, or limitations on how long
must be returned to Charlotte with a warranty claim HEAD / VALVE / BREATHER DECALS
an implied warranty lasts, so the above limitations or
form. All care and maintenance instructions must be
exclusions may not apply to you. This warranty gives PART NO. QTY DESCRIPTION PART NO. QTY DESCRIPTION
followed as stated by the manufacturer on the care
you specific legal rights, and you may also have other 14 318 01-S 1 Head Assembly, Cylinder 14 113 03-S 1 Decal, Warning
label. The fit of the protective apparel/boot is not
rights which vary from state to state.
covered under warranty. 14 146 01-S 1 Plate, Pushrod Guide 14 450 02-S 1 Tag, Hang
SECTION 5: CUSTOMER RESPONSIBILITIES 14 018 02-S 2 Retainer, Valve Spring
SECTION 2: HUSQVARNA’S OBLIGATIONS UNDER
The product must exhibit reasonable care, mainte-
THE WARRANTY 14 017 01-S 1 Valve, Intake STARTING SYSTEM
nance, operation, storage and general upkeep as
Husqvarna will repair or replace defective components
written in the maintenance section of the Owner’s/ 14 032 08-S 1 Seal, Valve Stem PART NO. QTY DESCRIPTION
without charge for parts or labor if a component fails
Operator’s manual. Should an operational problem 14 016 01-S 1 Valve, Exhaust 14 165 01-S 1 Starter Assembly
because of a defect in material or workmanship during
or failure occur, the product should not be used, but 14 100 01-S 2 Nut, Hex Jam (M6) (with Handle)
the warranty period.
delivered as is to an authorized Husqvarna dealer for
SECTION 3: ITEMS NOT COVERED BY THIS WAR- evaluation. Proof of purchase, as explained in section 14 599 01-S 2 Pivot, Rocker Arm M-641060-S 1 Nut, Hex Flange (M6)
RANTY 6, rests solely with the customer. 14 186 02-S 2 Arm, Rocker
The following items are not covered by this warranty: 14 072 02-S 2 Stud, Rocker Arm
SECTION 6: PROCEDURE TO OBTAIN WARRANTY
(1)Normal customer maintenance items which become
CONSIDERATION 14 411 01-S 2 Rod, Push
worn through normal regular use, including, but
It is the Owner’s and Dealer’s responsibility to make 14 096 05-S 1 Cover, Valve
not limited to, belts, blades, blade adapters, bulbs,
certain that the Warranty Registration Card is properly
filters, guide bars, lubricants, rewind springs, saw 14 041 01-S 1 Gasket, Valve Cover
filled out and mailed to Husqvarna Forest & Garden
chain, spark plugs, starter ropes and tines; 25 086 159-S 4 Screw, Hex Flange (M6)
Company. This card should be mailed within ten (10)
(2) Natural discoloration of material due to ultraviolet
days from the date of purchase in order to confirm the 25 086 140-S 4 Screw, Hex Flange (M8)
light;
warranty and to facilitate post-sale service. 14 841 04-S 1 Gasket, Cylinder Head
(3) Lawn and garden attachments are covered by a
third party which gives a warranty, all claims for Proof of purchase must be presented to the authorized 24 072 06-S 2 Stud, Carburetor (M6)
warranty should be sent to the manufacturer; and Husqvarna dealer in order to obtain warranty service. 14 041 24-S 1 Gasket, Carburetor,
(4)Emission Control System components necessary This proof must include date purchased, model num-
Heat Shield
to which are manufactured by third party engine ber, serial number, and complete name and address of
manufacturer. the selling dealer. 14 072 06-S 2 Stud, Exhaust (M6)
SECTION 4: EXCEPTIONS AND LIMITATIONS To obtain the benefit of this warranty, the product
This warranty shall be inapplicable to defects resulting believed to be defective must be delivered to an
from the following: authorized Husqvarna dealer in a timely manner, no
(1) Accident, abuse, misuse, negligence and neglect, later than thirty (30) days from date of the operational
including stale fuel, dirt, abrasives, moisture, rust, problem or failure. The product must be delivered at
corrosion, or any adverse reaction due to incorrect the owner’s expense. Pick-up and delivery charges are
storage or use habits; not covered by this warranty. An authorized Husqvarna
(2) Failure to operate or maintain the unit in accor- dealer can be normally located through the “Yellow
dance with the Owner’s/Operator’s manual or Pages” of the local telephone directory or by calling
instruction sheet furnished by Husqvarna; 1-800-HUSKY62 for a dealer in your area.
(3) Alterations or modifications that change the
intended use of the product or affects the product’s HUSQVARNA
performance, operation, safety, or durability, or 9335 Harris Corners Parkway
causes the product to fail to comply with any ap- Charlotte, NC 28269
plicable laws; or: 531 83 81-23 2002
4 45
KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3225-EA
PRODUCT SPECIFICATIONS
Serial Number:
Date of Purchase:
Gasoline Capacity / Type: 1.5 Quarts (Unleaded Regular)
HEAD/VALVE/BREATHER STARTING SYSTEM
Oil Capacity: 20 Ounces
14 017 02-S
14 380 06-S
14 016 02-S Oil Type (API SG–SL): SAE 30 (above 32°F); SAE 10W-30 (below 32°F)
14 318 01-S
M-641060-S Spark Plug: Champion RC12YC (Gap: .030")
Blade Bolt Torque: 35–40 ft. lbs.
24 072 06-S
14 089 02-S
ACCESSORIES
14 186 02-S 14 017 01-S
These accessories were available when this lawn mower was produced. They are not
14 599 01-S
shipped with your mower. They are also available at most Husqvarna retailers and
14 041 01-S Valve Seal also included service centers. Some of these accessories may not apply to your lawn mower.
in Gasket Set.
14 096 60-S
25 086 159-S 14 755 02-S
14 032 08-S
14 018 02-S
14 380 06-S
14 072 02-S
14 100 01-S 14 411 01-S
14 016 01-S
14 089 02-S
14 186 02-S
14 599 01-S Intake & Exhaust Valves
14 096 05-S available separately.
14 160 01-S
DECALS 14 160 03-S (n/a on *)
WARNING
14 379 01-S
14 113 03-S
14 113 02-S 14 113 57-S
14 113 07-S
14 113 17-S
14 113 08-S
14 113 15-S
14 113 16-S
14 113 43-S
14 113 52-S 14 113 04-S
14 113 20-S
14 113 23-S
14 113 40-S
14 113 54-S
BLOWER HOUSING
14 450 02-S & BAFFLES
14 113 53-S
14 098 01-S
14 098 04-S
14 098 05-S
25 113 39-S
44 5
KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3225-EA
ASSEMBLY / PRE-OPERATION
Read these instructions and this manual in its entirety before you attempt to assemble
or operate your new lawn mower.
IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.
Your new lawn mower has been assembled at the factory with the exception of those
parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc.,
BLOWER HOUSING & BAFFLES OIL PAN / LUBRICATION
necessary to complete the assembly have been placed in the parts bag. To ensure safe
PART NO. QTY DESCRIPTION PART NO. QTY DESCRIPTION
and proper operation of your lawn mower, all parts and hardware you assemble must be
tightened securely. Use the correct tools as necessary to ensure proper tightness. 14 027 03-S 1 Housing, Blower 14 199 06-S 1 Pan, Oil
14 096 27-S 1 Cover, Engine (Black) 25 086 159-S 1 Screw, Hex Flange (M6)
TO REMOVE MOWER FROM CARTON M-641060-S 3 Nut, Hex Flange (M6) 14 032 07-S 1 Oil Seal
1. Remove loose parts included with 25 086 167-S 4 Screw, #15, 6-Lobe Drive, 14 041 06-S 1 Gasket, Oil Pan
mower. Handle pin Pan Head (Hi-Low Thread) 25 086 161-S 6 Screw, Hex Flange (M8)
2. Cut down two end corners of carton SQUEEZE 14 332 04-S 1 Insert, Engine Cover 14 123 13-S 1 Tube Assembly, Oil Fill
and lay end panel down flat. 25 086 145-S 1 Screw, Hex Flange (M6)
3. Remove all packing materials except AIR INTAKE / FILTRATION
Handle
padding between upper and lower bracket PART NO. QTY DESCRIPTION CRANKCASE
handle and padding holding operator 14 123 05-S 1 Hose, Breather PART NO. QTY DESCRIPTION
presence control bar to upper handle. M-641060-S 2 Nut, Hex Flange (M6) 14 032 02-S 1 Seal, Oil
4. Roll lawn mower out of carton and 14 094 13-S 1 Base, Air Cleaner 14 468 07-S 1 Washer, Flat (13mm O.D.)
check carton thorougly for additional 14 096 51-S 1 Cover, Air Cleaner Base 14 032 04-S 1 Seal, Oil
loose parts. (Breather Gas) 14 050 01-S 1 Gasket, Breather Cover
HOW TO SET UP YOUR MOWER M-641060-S 2 Nut, Hex Flange (M6) 25 086 159-S 2 Screw, Hex Flange (M6)
TO UNFOLD HANDLE 14 096 09-S 1 Cover, Air Cleaner 14 067 01-S 1 Rod Assembly, Connecting
14 083 01-S 1 Element, Air Filter 14 018 03-S 2 Retainer, Piston Pin
IMPORTANT: Unfold handle carefully so
as not to pinch or damage control cables. 41 037 10-S 1 Nameplate Ticket 25 086 145-S 1 Screw, Hex Flange (M6)
1. Raise lower handle section to operat- 14 380 06-S 2 Pin, Dowel (10mm)
ing position and squeeze the bottom TO ASSEMBLE GRASS CATCHER IGNITION / ELECTRICAL
ends of lower handle towards each 1. Put grass catcher frame into grass bag PART NO. QTY DESCRIPTION CRANKSHAFT
other until the pin in handle can be with rigid part of bag on the bottom. 12 132 02-S 1 Spark Plug (K5RTC) PART NO. QTY DESCRIPTION
inserted into one of the three height Make sure the frame handle is outside 14 025 02-S 1 Flywheel Assembly, 14 014 47-S 1 Crankshaft Assembly
adjustment holes. of the bag top. Aluminum 14 340 01-S 1 Key, Woodruff
2. Remove protective padding, raise up- 2. Slip vinyl bindings over frame. 14 100 10-S 1 Nut, Flywheel
per handle section into place on lower NOTE: If vinyl bindings are too stiff, hold (with Serrations)
handle and tighten both handle knobs. them in warm water for a few minutes. If 14 157 01-S 1 Fan, Flywheel (Plastic)
3. Remove any packing material from bag gets wet, let it dry before using. 14 109 02-S 1 Cup, Starter Drive
around control bar. Frame 14 072 13-S 1 Stud, Blower Housing
Your lawn mower handle can be adjusted handle (Ignition)
for your mowing comfort. Refer to “AD- 14 072 12-S 2 Stud, Blower Housing
JUST HANDLE” in the Service and Adjust- (Fuel Tank)
ments section of this manual. 14 112 07-S 3 Spacer,
Operator MOWING Compression Limiter
presence POSITION
control bar 14 584 05-S 1 Module, Ignition
(Aluminum Flywheel)
LIFT
UP 14 050 04-S 1 Filter, Fuel Vapor
25 086 145-S 1 Screw, Hex Flange (M6)
14 219 07-S 1 Brake Assembly
LIFT 25 086 159-S 2 Screw, Hex Flange (M6)
Upper
UP handle Vinyl Frame 14 314 01-S 1 Guard, Finger
bindings opening 25 086 159-S 2 Screw, Hex Flange (M6)
TO INSTALL ATTACHMENTS
Handle Your lawn mower was shipped ready to be
knob used as a mulcher. To convert mower to
bagging or discharging, see “TO CON-
VERT MOWER” in the Operation section
Lower handle of this manual.
6 43
KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3225-EA
OPERATION
KNOW YOUR LAWN MOWER
READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING
YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize
BLOWER HOUSING & BAFFLES OIL PAN/LUBRICATION yourself with the location of various controls and adjustments. Save this manual for
25 086 167-S future reference.
14 123 04-S 14 123 13-S
M-641060-S 14 123 11-S 14 123 14-S
14 332 05-S These symbols may appear on your lawn mower or in literature supplied with the
14 332 04-S
14 332 09-S product. Learn and understand their meaning.
14 332 10-S
14 14
25 086 153 153
145-S 01-S 05-S
14 032 05-S
14 032 07-S
Drive cover
25 086 161-S
14 390 04-S
M-641060-S 14 096 09-S Starter
14 096 30-S CRANKCASE handle
25 086 159-S
25 086 145-S
14 112 07-S
14 072 12-S Gasoline filler cap
14 072 13-S 14 032 02-S 14 050 01-S
14 584 05-S Grass
12 132 02-S catcher
14 584 01-S 14 100 02-S
14 584 04-S
14 100 10-S Air filter
14 109 02-S
Single point
14 486 07-S height adjuster
14 584 02-S 14 032 04-S handle
14 157 01-S
14 314 01-S 14 018 03-S
14 154 01-S
Engine oil cap with dipstick
14 380 06-S
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
in foreign objects thrown become “loose”, resulting in decreased
into the eyes, which can speed. There is a turnbuckle on the drive
HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.374142 (PRODUCT NUMBER 7021RD)
result in severe eye dam- control housing to increase tension on the
age. Always wear safety glasses or eye drive cable. Proceed as follows:
shields while operating your lawn mower 1. Turn unit off and disconnect spark plug
or performing any adjustments or repairs. wire from spark plug.
E-Ring 7/16
Washer, Flat
Cover Drive
Belt Keeper
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.
ENGINE ZONE CONTROL
CAUTION: Federal regulations require
Washer
O-Ring
Pinion
V-Belt
an engine control to be installed on this
Pawl
lawn mower in order to minimize the
risk of blade contact injury. Do not under
199775X418
405746X460
403102X004
407175X004
401273X460
404832X004
any circumstances attempt to defeat the
17060410
12000058
function of the operator control. The blade Adjustment
750634
189403
404845
409148
851226
161463
163409
407059
404835
197480
406580
163409
PART
67725
turns when the engine is running. turnbuckle
NO.
• Your lawn mower is equipped with an
operator presence control bar which
KEY
requires the operator to be positioned
NO.
47
24
25
26
28
29
31
32
33
34
35
36
37
38
39
40
41
42
44
49
50
behind the lawn mower handle to start
and operate the lawn mower.
TO ADJUST CUTTING HEIGHT
DRIVE CONTROL All four wheels are adjusted by a single
• Self-propelling is controlled by hold- lever.
• Pull adjuster lever toward wheel. To
Spring, Extension
Mounting Bracket
Rod, Connecting
is pulled, the faster the unit will travel.
Spring, Selector
Spring, Return
DESCRIPTION
Cover, Bottom
• Forward motion will stop when either LEVER
Bearing, Ball
Washer, Flat
Pulley, Drive
Cable, Drive
E-Ring 7/8
BACKWARD
Cover, Top
the operator presence control bar or
drive control lever are released. To stop TO LOWER
Screw
MOWER
Pulley
forward motion without stopping engine,
release the drive control lever only. Hold Height
operator presence control bar down adjuster lever
406260X460
406261X460
400235X479
418835X004
189808X428
161118X004
against handle to continue mowing
12000022
without self-propelling.
425581
406262
425583
181698
406258
406558
419213
193443
407147
409616
404838
191039
PART
NOTE: If after releasing the drive control
88348
NO.
the mower will not roll backwards, push
the mower forward slightly to disengage
KEY
drive wheels.
NO.
13
14
15
16
17
18
19
20
21
22
23
11
1
2
3
4
5
6
7
9
Operator presence control bar Drive control
lever
LEVER
FORWARD
TO RAISE
TO MOWER
ENGAGE DRIVE
DRIVE CONTROL
CONTROL DISENGAGED 8 41
TO CONVERT MOWER
Your lawn mower was shipped ready to be
33
40
used as a mulcher. To convert to bagging
or discharging:
HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.374142 (PRODUCT NUMBER 7021RD)
REAR BAGGING
15
• Open rear door and remove mulcher
38
42
plug. Store mulcher plug in a safe
place.
37
• You can now install the grass catcher or
optional clipping deflector.
36
• To convert to mulching or discharging Open mulcher door
operation, install mulcher plug into rear
discharge opening of mower. Discharge deflector
39
44
16
33
17
32
28
47
41
Mulcher plug
31
29
25
22
34
SIDE DISCHARGING
21
15
18
38
35
40
29
33
49
31
28
5
47
3
33
40 9
TO EMPTY GRASS CATCHER ADD GASOLINE
1. Lift up on grass catcher using the • Fill fuel tank to bottom of tank filler neck.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
frame handle. Do not overfill. Use fresh, clean, regular
2. Remove grass catcher with clippings unleaded gasoline with a minimum of 87
HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.374142 (PRODUCT NUMBER 7021RD)
from under lawn mower handle. octane. Do not mix oil with gasoline. Pur-
3. Empty clippings from bag. chase fuel in quantities that can be used
NOTE: Do not drag the bag when empty- within 30 days to assure fuel freshness.
ing; it will cause unnecessary wear. CAUTION: Wipe off any spilled oil or
Frame, Grassbag
Fuel Stabilizer
system of an engine while in storage. To
Danger Decal
Washer, Lock
Bolt, Engine
Grip, Foam
Blade, 21"
Grassbag
should be emptied before storage of 30
Nut, Hex
Washer
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.
Screw
days or longer. Empty the gas tank, start
the engine and let it run until the fuel lines
and carburetor are empty. Use fresh fuel
next season. See Storage Instructions for
additional information. Never use engine
71 33623
71 33500
71 33000
17060410
161586
406712
851074
850263
851084
150406
425667
404763
182748
402786
432806
or carburetor cleaner products in the fuel
421176
411951
PART
88652
88349
---
NO.
tank or permanent damage may occur.
BEFORE STARTING ENGINE
ADD OIL Gasoline
KEY
NO.
28
29
30
31
32
33
34
37
38
39
40
41
42
45
46
47
48
59
--
--
--
--
--
Your lawnmower is shipped without oil in filler cap
the engine. For type and grade of oil to
use, see “ENGINE” in the Maintenance
Bracket, Upstop
Cotter, Hairpin
Plug, Mulcher
Knob, Handle
changing oil you may need 20 oz. TO STOP ENGINE
Kit, Housing
Rope Guide
Baffle, Side
Control Bar
4. Insert and tighten dipstick.
Skirt, Rear
• To stop engine, release operator pres-
Wire, Tie
Nut, Hex
IMPORTANT: ence control bar.
Screw
• Check oil level before each use. Add oil
if needed. Fill to full line on dipstick.
• Change the oil after every 25 hours of TO START ENGINE
193664X498
427415X422
850733X004
401815X428
193917X422
193916X422
operation or each season. You may NOTE: Due to protective coatings on the
73800500
need to change the oil more often engine, a small amount of smoke may be
427659
405416
194788
132004
191574
182398
188821
405415
750634
184193
198170
410453
428867
163183
161333
163409
408442
751153
PART
under dusty, dirty conditions. See “TO present during the initial use of the product
66426
51793
NO.
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
11
choking is required before starting.
1
2
3
4
5
6
7
8
• To start engine, hold operator presence 9
control bar down to the handle and pull
starter handle quickly. Do not allow
starter rope to snap back.
10 39
MOWING TIPS MULCHING MOWING TIPS
REPAIR PARTS CAUTION: Do not use de-thatcher IMPORTANT: For best performance,
blade attachments on your mower. Such keep mower housing free of built-up
attachments are hazardous, will damage grass and trash. See “CLEANING” in the
HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.374142 (PRODUCT NUMBER 7021RD)
your mower and could void your warranty. Maintenance section of this manual.
31
• Under certain conditions, such as very • The special mulching blade will recut
48
32
33
34
30
tall grass, it may be necessary to raise the grass clippings many times and
the height of cut to reduce pushing effort reduce them in size so that as they fall
and to keep from overloading the engine onto the lawn they will disperse into
and leaving clumps of grass clippings. the grass and not be noticed. Also, the
It may also be necessary to reduce mulched grass will biodegrade quickly
ground speed and/or run the lawn to provide nutrients for the lawn. Always
mower over the area a second time. mulch with your highest engine (blade)
• For extremely heavy cutting, reduce the speed as this will provide the best recut-
19
width of cut by overlapping previously ting action of the blades.
cut path and mow slowly. • Avoid cutting your lawn when it is wet.
38
22 • For better grass bagging and most cut- Wet grass tends to form clumps and
ting conditions, the engine speed should interferes with the mulching action. The
20
be set in the FAST position. best time to mow your lawn is the early
• Pores in cloth grass catchers can afternoon. At this time the grass has
become filled with dirt and dust with use dried, yet the newly cut area will not be
and catchers will collect less grass. To exposed to direct sunlight.
37
prevent this, regularly hose catcher off • For best results, adjust the lawn mower
with water and let dry before using. cutting height so that the lawn mower
• Keep top of engine around starter clear cuts off only the top one-third of the
47
and clean of grass clippings and chaff. grass blades. If the lawn is overgrown it
This will help engine air flow and extend will be necessary to raise the height of
18
42
45
24 clumps of mulched grass. For extremely
heavy grass, reduce your width of cut
10
28
12
MAX 1/3
21
25
7
11
27
46
21
6
17
28
13
8
23
26
10
40
59
29
4
9
38 11
SOLUCIÓN DE PROBLEMAS - Vea la sección apropiada en el manual amenos que
MAINTENANCE esté dirigido a un centro de servico Husqvarna.
PROBLEMA CAUSA CORRECCIÓN
BEFORE AFTER EVERY EVERY EVERY
BEFORE No arranca 7. Cuchilla suelta o adaptador 7. Apriete el perno de la cuchilla
EACH EACH 10 25 HOURS 100 (continuado) de la cuchilla quebrado. cambie el adaptador de la cuchilla.
USE USE HOURS OR SEASON HOURS STORAGE
8. Barra de control en la 8. Presione la barra de control
Check for Loose Fasteners posición suelta. hacia el mango.
Clean / Inspect Grass Catcher * 9. Barra de control defectuosa. 9. Cambie la barra de control.
Check Tires 10. Válvula del combustible (si equ- 10. Gire a la válvula del combustible
Check Drive Wheels *** ipada) está en la posición OFF. a la posición ON.
Clean Lawn Mower ****
Falta de 1. Cuchilla desgastada, doblada 1. Eleve la altura de corte.
Clean under Drive Cover *** fuerza o suelta.
Check Drive Belt / Pulleys *** 2. Altura de las ruedas dispareja. 2. Eleve la altura de corte.
Check / Sharpen / Replace Blade 3. Velocidad del motor lenta. 3. Limpie/cambie el filtro de aire.
Lubrication 4. Acumulación de césped, hojas o 4. Limpie la parte inferior de la
Clean and Recharge Battery ** basura debajo de la segadora. caja de la segadora.
5. Demasiado aceite en motor. 5. Revise el nivel del aceite.
Check Engine Oil level
6. Velocidad de recorrido 6. Corte a una velocidad de
Change Engine Oil demasiado rápida. recorrido más lenta.
Clean Air Filter
Inspect Muffler Mal corte- 1. Cuchilla desgastada, doblada 1. Cambie la cuchilla. Apriete el perno
Replace Spark Plug disparejo o suelta. de la cuchilla.
Replace Air Filter Paper Cartridge 2. Altura de las ruedas dispareja. 2. Ajuste todas las ruedas a la misma
Empty fuel system or add Stabilizer altura.
3. Acumulación de césped, hojas o 3. Limpie la parte inferior de la
* (if so equipped) 1 - Change more often if operating under a heavy load or in high outdoor temperatures. basura debajo de la segadora. caja de la segadora.
2 - Service more often if operating in dirty or dusty conditions.
** Electric-Start mowers 3 - Replace blades more often when mowing in sandy soil.
*** Power-Propelled mowers Vibración 1. Cuchilla desgastada, doblada 1. Cambie la cuchilla. Apriete el
4 - Charge 48 hours at end of season.
**** Use a scraper
to clean under deck 5 - And after each 5 hours of use.
excesiva o suelta. perno de la cuchilla.
2. Cigueñal del motor doblado. 2. Póngase en contacto con su centro
de servicio Husqvarna o con un otro
centro de servicio cualificado.
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this lawn mower does not Cordón 1. El freno del volante del motor 1. Presione la barra de control
cover items that have been subjected to ➀ Wheel arrancador está aplicado cuando se hacia el mango superior antes
operator abuse or negligence. To receive adjuster (on difícil de tirar suelta la barra de control. de tirar el cordón arrancador.
full value from the warranty, operator must each wheel) 2. Cigueñal del motor doblado. 2. Póngase en contacto con su centro
maintain unit as instructed in this manual. de servicio Husqvarna o con un otro
centro de servicio cualificado.
Some adjustments will need to be made ➁ Engine oil 3. Adaptador de la cuchilla quebrado. 3. Cambie el adaptador de la cuchilla.
periodically to properly maintain your unit. 4. La cuchilla se arrastra en 4. Mueva la segadora a un lugar
At least once a season, check to see if
you should make any of the adjustments ➀ Mulcher el césped. en donde el césped ha sido
cortado o a una superficie firme
door hinge
described in the Service and Adjustments para hacer arrancar el motor.
pin
section of this manual.
• At least once a year, replace the spark Recogedor de 1. Altura de corte demasiado baja. 1. Eleve la altura de corte.
plug, clean or replace air filter element ➀ Rear door césped no se 2. Levantamiento de la cuchilla 2. Cambie las cuchillas.
hinge llena (si viene desgastado.
and check blade for wear. A new spark
equipado) 3. Recogedor sin ventilación de aire. 3. Limpie el recogedor de césped.
plug and clean/new air filter element
assure proper air-fuel mixture and help Difícil de 1. El césped está demasiado alto o la 1. Eleve la altura de corte.
your engine run better and last longer. empujar altura de la rueda demasiado baja.
• Follow the maintenance schedule in this 2. Parte trasera de la 2. Eleve la parte trasera de la caja de
manual. ➀ Handle bracket mounting pins caja/cuchilla de la segadora
arrastrándose en el césped.
la segadora (1) un lugar más alto.
PALANCA
HACIA
ADELANTE
Control de PARA
la impulsión LEVANTAR EL
PARA CORTACÉSPED
ENGANCHAR EL CONTROL DE LA
CONTROL DE LA IMPULSIÓN
IMPULSIÓN DESENGANCHADO
26 23
MONTAJE / PRE-OPERACIÓN OPERACIÓN
Lea estas instrucciones y el manual completamente antes de tratar de montar u operar su sega- FAMILIARICESE CON SU SEGADORA
dora nueva. LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPARAR SU
IMPORTANTE: Este cortacesped viene SIN ACEITE O GASOLINA en el motor. SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicación de
Su segadora nueva ha sido montada en la fábrica con la excepción de aquellas partes que se de- los diversos controles y ajustes. Guarde este manual para referencia en el futuro.
jaron sin montar por razones de envío. Todas las partes como las tuercas, las arandelas, los per-
nos, etc., que son necesarias para completar el montaje han sido colocadas en la bolsa de partes. Estos símbolos pueden apareser sobre su segadora o en la literatura proporcionada con el
Para asegurarse que su segadora funcione en forma segura y adecuada, todas las partes y los producto. Aprenda y comprenda sus significados.
artículos de ferretería que se monten tienen que ser apretados seguramente. Use las herramientas
correctas, como sea necesario, para asegurar que se aprieten adecuadamente.
PARA REMOVER LA SEGADORA DE
LA CAJA DE CARTÓN
1. Remueva las partes sueltas que se incluyen
con la segadora. Pinza del mango
2. Corte las dos esquinas de los extremos APRIETE
de la caja de cartón y tienda el panel del
extremo plano. Palanca de
control de la Barra de control que exige la
3. Remueva todo el material de empaque, ex-
impulsión presencia del operador
cepto la cuña entre el mango superior y él Soporte de
inferior, y la cuña que sujeta la barra de los mango
control que exige la presencia del operador
junto con el mango superior. Manilla del mango
4. Haga rodar la segadora hacia afuera de la
caja de cartón y revísela cuidadosamente
para verificar si todavía quedan partes
sueltas adicionales.
Cubierta de la impulsión
COMO PREPARAR SU SEGADORA
Cordón
PARA DESDOBLAR EL MANGO PARA MONTAR EL RECOGEDOR DE arrancador
IMPORTANTE: Despliegue el mango con CÉSPED
mucho cuidado para no pellizcar o dañar los 1. Ponga el bastidor del recogedor de césped
cables de control. en la bolsa del césped con la parte rígida Tapa del deposito
1. Levante la sección del mango inferior a la de la bolsa en la parte inferior. Asegúrese de la gasolina
posición de operación y presione las ex- que el mango del bastidor esté en el exte-
tremidades inferiores del mando inferior una rior de la parte superior de la bolsa. Recogedor
en contra una de la otra hasta que la pinza 2. Deslice los sujetadores de vinilo sobre el de césped
del mando pueda ser insertada en uno de bastidor.
los tres agujeros del control de la altura. AVISO: Si los sujetadores de vinilo están muy Filtro de aire
2. Levante la sección del mango superior duros, métalos en agua caliente por algunos Mango del
hasta la posición de operación, remueva la minutos. Si se moja la bolsa, déjela que se ajustador de un solo punto
cuña protectora y apriete las manillas del seque antes de usarla.
mango en forma segura. Mango del
3. Remueva el material de empaque de alred- Tapa del deposito de
bastidor del
edor de la barra de control. recogedor
aciete del motor con
El mango de la segadora puede ajustarse varilla indicadora de nivel
según le acomode para segar. Refiérase a
Caja
“AJUSTE DEL MANGO” en la Sección de Ser- Silenciador
vicio y Ajustes de este manual.
Puerta de la acolchadora Bujía
Barra de control POSICIÓN
que sxige la PARA
presencia del SEGAR
operador IMPORTANTE: Este cortacésped viene SIN ACEITE O GASOLINA en motor.
LEVAN-
TAR
CUMPLE CON LOS REQUISITOS DE SEGURIDAD DE LA CPSC
Las segadoras a motor, que se conducen desde la parte de atrás, rotatorias, Sears, cumplen con
LEVANTAR Sujetadores Abertura los estándares de seguridad del American National Standards Institute y de la U.S. Consumer
Mango de vinilo del bastidor Product Safety Commission. La cuchilla gira cuando el motor está funcionando.
superior
PARA INSTALAR LOS ACCESORIOS Barra de control que exige la presencia del Cordón arrancador – se usa para hacer ar-
Su segadora fue enviada lista para usarse operador – tiene que sujetarse abajo, junto rancar el motor.
Manilla del como una acolchadora de capa vegetal. Para con el mango, para hacer arrancar el motor. Palanca de control de la impulsion – se usa
mango convertirla de modo que pueda ensacar o Suéltela para parar el motor. para enganchar la segadora para movimiento
descargar, refiérase a “PARA CONVERTIR LA Puerta de la acolchadora – permite la conver- hacia adelante impulsada a motor.
SEGADORA” en la sección de Operación de sión para la operación de descarga o ensacado.
Mango Inferior 24 este manual. 25