Professional Documents
Culture Documents
1 setup guide
1. Make sure that you are logged in as the wasadmin user. If you are not, log off and log
back on as the user wasadmin.
Note: This user was created during the DB2 installation in preparing for the class. It
is not required in a normal installation to use a database administrative ID but has
been done to make the setup of the lab environment easier.
WebSphere requires certain user rights of the ID that will run the Application
Server. The DB2 installation can automatically create an administrative ID and
assign the appropriate rights. For the WebSphere installation the user ID and rights
must be assigned before running the installation.
The required user rights on a Windows machine are: “Act as part of the operating
system” and “Log on as a service”.
2. If possible, disable any anti-virus or script-blocking software that may interfere with
the installation.
3. Copy the WebSphere Application Server v6.1 CD and the WebSphere v6.1
Supplement CD directly to C:\Software. The system will alert you that the folder
already exist, simply click Yes. The directory C:\Software\WAS v61 should be
created with two subfolders; WAS and SUPPLEMENT.
Page 1 of 17
WebSphere Application Server v6.1 setup guide
5. From the left of the launchpad choose the link WebSphere Application Server
Installation.
6. Then click on the link Launch the installation wizard for the WebSphere
Application Server in the right side.
7. Then click on the link Launch the installation wizard for the WebSphere
Application Server in the right side
10.Once the system passes the prerequisite checks press the Next button.
11.Leave the box for installing the sample applications unchecked and press the Next
button.
Page 2 of 17
WebSphere Application Server v6.1 setup guide
12.Leave the default installation directory as shown above and press the Next button.
Page 3 of 17
WebSphere Application Server v6.1 setup guide
13.Leave the box for Enable administrative security checked. Fill in the user name and
password as wasadmin.
14.Press the Next button when your screen matches the one shown above.
Page 4 of 17
WebSphere Application Server v6.1 setup guide
15.On the Installation Summary screen press the Next button to begin the installation.
The installation will take some time.
Page 5 of 17
WebSphere Application Server v6.1 setup guide
16.Once the installation is complete, click on the link for the AboutThisProfile.txt file.
17. In the file that is opened, note the Profile name, Node name, and Host name.
Page 6 of 17
WebSphere Application Server v6.1 setup guide
19.When the installation is complete press the Finish button. This will launch the First
Steps console.
20.Click the link for Installation verification. This will take some time.
Page 7 of 17
WebSphere Application Server v6.1 setup guide
21.You will get the message “Server server1 open for e-business” and make sure that
you get a message that the verification is succeeded and completed.
23.In the First Steps window, click the link for Stop the Server.
Page 8 of 17
WebSphere Application Server v6.1 setup guide
24.You will get the message “Server server1 stop completed”. Then close the window
that showed the output of stopping the server.
4. Click the link for Launch the installation wizard for IBM HTTP Server.
Page 9 of 17
WebSphere Application Server v6.1 setup guide
7. Once the system passes the prerequisite checks press the Next button
8. Leave the default installation directory as is and press the Next button.
9. Accept the default values for the HTTP port and administration port. Click the Next
button.
Page 10 of 17
WebSphere Application Server v6.1 setup guide
10. Select the radio button to Log on as a local system account as shown below. Press the
Next button.
11. Leave the option for Create a user ID for IBM HTTP administration server
authentication checked. Fill in wasadmin as user ID and password. Click the Next
button.
Page 11 of 17
WebSphere Application Server v6.1 setup guide
12. Leave the option for “Install the IBM HTTP Server Plug-in for IBM WebSphere
Application Server” option checked. Click the Next button.
13. Press the Next button in the summary screen to start the installation.
Page 12 of 17
WebSphere Application Server v6.1 setup guide
9. From the list of Web servers, select the radio button for IBM HTTP Server V6 or
V6.1.
Page 13 of 17
WebSphere Application Server v6.1 setup guide
16. Ensure that the IBM HTTP Server directory is correct as shown below. If not, click
on the Browse button to navigate to the correct location.
19. Accept the default web server definition name and press Next.
20. Leave the default for the Web server plugin-cfg.xml file and press Next.
Page 14 of 17
WebSphere Application Server v6.1 setup guide
Page 15 of 17
WebSphere Application Server v6.1 setup guide
24. A Web server plugin installation roadmap will open in a web browser. Close it.
25. In the Summary page, ensure that the installation is successful and press Finish.
Page 16 of 17
WebSphere Application Server v6.1 setup guide
1. Start the Application Server selecting Start -> Programs -> IBM WebSphere ->
Application Server v6.1 -> Profiles -> AppSrv01 -> Start the Server.
2. Once the server is started, open a web browser and type the URL
'http://localhost:9080/snoop' into the address bar. You should see the output below.
4. Stop the Application Server by selecting Start -> Programs -> IBM WebSphere ->
Application Server v6.1 -> Profiles -> AppSrv01 -> Stop the Server.
Page 17 of 17