Professional Documents
Culture Documents
1312.1x/12-10 G3 RPK
Process Pumps
acc. to API 610
Heavy duty centrifugal pumps
Application
Max. admissible pump discharge pressure in bar
40
25
Horizontal, radially split volute casing pump in back pull-out
design according to API 610 and DIN ISO 9905 (VDMA 24297, 21
requirement class A-heavy duty) with radial impeller, single 20
18
entry, single stage and centerline pump feet. 16
1312:168/5
GS-C25N u.1.4008
10 9.4460
DN 80-100
Discharge Q upto 280 m3/h -70 -40 -10 0 80 100 120 200 290 400
Head H upto 58 m Temperature of medium handled in °C
Temperature t -40 °C to 400 °C Shaft Seal
Speed n upto 2900 rpm The shaft Seal is available as a mechanical seal or a gland
Pressure P upto 40 bar packing.
Mechanical seals are commercially available single or double
Designation acting mechanical seals, seal plan according to API.
RPK 100 200 M
Material of Construction
Type Series
Description E C
Discharge Nozzle DN (mm) Volute casing Creep-resistant cast steel Cast Cr. Ni. Mo. Steel
Discharge cover Creep-resistant cast steel Cast Cr. Ni. Mo. Steel
Impeller Nominal Diameter (mm) Shaft Tempering steel Tempering steel
Mechanical Seal Impeller Gray cast iron Cast Cr. Ni. Mo. Steel
Bearing bracket Gray cast iron Gray cast iron
Bearing bracket lantern Creep-resistant cast steel Creep-resistant cast steel
Pressure and Temperature Limits SR sleeve Cr. Ni. Mo. Steel Cr. Ni. Mo. Steel
Without special regulations Bottom bush Tin bronze Tin bronze
Casing wearing ring Gray cast iron Cast Cr. Ni. Mo. Steel
Suitable for all types of liquids except hot water and organic Impeller wearing ring Gray cast iron Cast Cr. Ni. Mo. Steel
heat transfer media.
I Net
ISO-9001-2000 CERTIFIED
RPK
Selection Curves
n = 1450 1/min
H
m
200
50
H
40 ft
30 100
20
50
40
10
30
20
3 10
1 2 3 4 5 Qm3/h 10 20 30 40 50 100 200 300 400 500
0.3 0.4 0.5 Ql/s 1 2 3 4 5 10 20 30 40 40 100 150
n = 2900 1/min
5 10 U.S. gpm 30 40 50 100 200 300 400 500 1000 2000
500
400
100
300
H
H ft
m
200
50
40
100
30
20
50
40
10
2 3 4 5 Qm3/h 10 20 30 40 50 100 200 300 400 500
0.3 0.4 0.5 Q l/s 1 2 3 4 5 10 20 30 40 50 100
RPK
503.1 102
922.01 502.1
502.02
916.18 901.31
902.01
920.01 503.02 900.04 400.32
400.10
161 344 920.4
902.4
360.01 914.4 330
400.01 322.01 903.06 320.2
914.02
931.01
920.21
507.02
940.02
360.02
400.02
550.23
932.02
901.04
930.01
638
903.46
400.46
400.11 916.18 412.01 524.01 932.01 183
PART LIST
PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION
102 Volute Casing 433 Mechanical Seal 902.01/.04 Stud
320.02 Angular contact Ball Bearing 524.01/.02 Shaft Protecting Sleeve 916.18 Plug
322.01 Cylindrical roller bearing 542 Throtle Bush 920.01/.04/.21 Hex Nut
344 Bearing Bracket lantern 561.01/.02 Groove Pin 930.01 Spring Washer
360.01/.02 Bearing Cover 571.01 Mechanical Seal Cover 931.01 Lock Washer
Design Features
Safe design of the Cooling or heating Jacking screws for Shaft and bearings
parts under of the shaft seal easy dismantling. are dimensioned so
Flanges according pressure by quality possible as to ensure
to all standards casting with 3 mm minimum shaft
available up to corrosion deflection and a
PN 40. allowance. long bearing life.
Sealing chamber
also suitable for
mechanical seals in
long design (back
to-back or tandem
arrangement).
Constant-level oiler
ensures constant
oil level and easy
monitoring.
Shaft not in contact
with the medium
handled (dry shaft).