Professional Documents
Culture Documents
Aestiva™/5 7100
anesthesia machine
An evolution of performance
and value
Two vaporizer configuration
shown with optional
Cardiocap™/5 monitor
• Direct access to ventilator parameter settings Improved low flow/reduced life cycle costs
• Smart alarms direct user to specific problems • Fresh gas flow compensation — automatically
• Pressure bar graph for visual reference on • Optional dual air flow tubes for resolution
a breath-by-breath basis (optional pressure of low flows
waveform available)
• Two scheduled maintenance checks per year
Aestiva™/5 7100
Physical specifications
Dimensions Lower shelves (optional)*
2 Vaporizer 3 Vaporizer Heights: 9.2 cm/3.7 in 13.2 cm/5.2 in
configuration configuration 20.6 cm/8.2 in 24.6 cm/9.8 in
28.6 cm/11.4 in 36 cm/14.4 in
Height: 135.8 cm/53.4 in 135.8 cm/53.4 in
Width: 42.5 cm/16.75 in 42.5 cm/16.75 in
Width: 75 cm/29.5 in 93 cm/36.6 in
Depth: 36 cm/14 in 36 cm/14 in
Depth: 83 cm/32.7 in 83 cm/32.7 in
Weight: Approximately Approximately Absorber bag arms
136 kg/300 lbs 154 kg/340 lbs Adjustable Non-adjustable
VTE ƒ Ppl-60% 32
Pmax Breathing rate: 0 to 65 breaths per minute,
630 700
10 39Pmean 24
mL
600
/min PEEP
cmH2O 5 1 breath per minute resolution
Vent On Volume Control Circle
VT Rate I:E Plimit PEEP
625
mL
10
/min
1:1.5 cmH20
40 Off
0 cmH2O 15
Oxygen
percentage: 5% to 110%, 1% resolution
Airway pressure: –9 to 99 cm H2O, 1 cm H2O resolution
Alarm settings
Tidal volume (VTE): Low: OFF, 5 to 1500 mL
High: 20 to 1600 mL, OFF
Optional pressure waveform shown
Minute volume (VE): Low: OFF, 0.1 to 10 L/min
Modes of ventilation High: 0.5 to 30 L/min, OFF
Volume Control Mode Inspired oxygen
With tidal volume compensation (FiO2): Low: 18 to 100%
Pressure Mode (optional) High: 21 to 100%, OFF
Apnea alarm: Mechanical ventilation ON:
Ventilation parameters
< 5 mL breath measured in 30 seconds
Tidal volume range: 45 to 1500 mL
Mechanical ventilation OFF:
Incremental < 25 mL breath measured in 30 seconds
settings: 45 to 100 mL (increments of 5 mL)
100 to 300 mL (increments of 10 mL) Low airway
300 to 1000 mL (increments of 25 mL) pressure: Change of 4 cm H2O above PEEP
1000 to 1500 mL (increments of 50 mL) Pressure
Pressure (Plimit) range: 12 to 99 cm H2O (increments of 1 cm H2O)
(PInspired) range: 5 to 50 cm H2O (increments of 1 cm H2O) Sustained airway
(Pressure mode) pressure: Adjustable: 6 to 30 cm H2O
Rate: 4 to 65 breaths per minute Subatmospheric
(increments of 1 breath per minute) pressure: Paw < –10 cm H2O
Inspiratory/ Alarm silence
expiratory ratio: 2:1 to 1:6 (increments of 0.5) countdown timer: 120 to 0 seconds
Inspiratory
pause adjust: 5% to 60% of inspiratory time (increments of 5%)
• flam to O moni
• Only
an
with manu
See ation
.
rni all times ence ts. n
Wa ht atlave. presc ic agennctio
uprigautoc in the sthet conlu
not use e anae in tor.
• DoNot for mabl be used
rs affec
of
ns.
uctio rman
al forInstr perfo ce
al ting tenan
main s.
and ation
ce.
repeatability: ±2 cm H2O
Next
18
16
14
12
10
8 7
6 5 4 3 2 1
s may
flow hing of
gas use
g low the breats the
in mend
rnin gs withwith
Wa settin ures recom
rizer mixt gly n. and
vapo xiceda stron g. L/mi1013mb.
High to hypoOhm re use. to 10 at
lead it. monitorin al befos of
0.2 to 30C
circu en
oxyg r to
manuat flow of 18C
res
Refe for useeratu
Volume
rated temp
Calibambient
at
s
6 Plu
Tec
NO
LOW
WARM
IONAL
OUTPU
AGENT
UP
T
LOW
ALARMRY
BATTE
Pressure
monitoring: Better than ±2 cm H2O or ±5% of reading Tec 7 Tec 6 Plus
(whichever is greater)
Electrical specifications
Ventilator components
Current leakage
Flow transducer 120 V: < 300µA
Type: Variable orifice flow sensor 220 V: < 500µA
Dimensions: 22 mm OD and 15 mm ID
Power
Location: Inspiratory outlet and expiratory inlet
Power input: USA/Canada/Mexico: 120 Vac, 60 Hz
(Optional autoclavable sensor available) Euro: 220-240 Vac, 50 Hz
France/Belgium: 230 Vac, 50 Hz
Oxygen sensor Japan: 100 Vac, 50 or 60 Hz
Type: Galvanic fuel cell UK: 240 Vac, 50 Hz
Power cord: Length: 5 m/16.4 ft
Ventilator pneumatics
Rating: 10A @ 250 Vac or 15A @ 120 Vac
Pressure range
at inlet: 240 kPa to 700 kPa/35 psig to 100 psig Inlet/outlet modules
Peak gas flow: 70 L/min + fresh gas flow 220-240 V 120 V 100 V
Communication port
Serial interface: Isolated RS-232C compatible port
Aestiva™/5 7100
Materials
All materials in contact with exhaled patient gases are autoclavable,
except standard flow sensors. (Autoclavable sensors optional)
All materials in contact with patient gas are free of natural rubber latex.
Aestiva™/5 7100