Professional Documents
Culture Documents
USER MANUAL
(Model: 210)
CONTENT
Preface ......................................................................................................................... 2
I. Features & Functions................................................................................................. 3
II. How to Operate it ..................................................................................................... 4
Check the location by Google Map’s URL...................................................................................4
Page1
TK210 GPS Car Alarm User Manual
Preface
TK210 wireless GPS car alarm & tracking device is specially used to work
with the central lock system or ordinary car alarm system. User can use the
original remote control to arm/disarm the TK210 for car security.
TK210 supports tracking by SMS/GPRS, user can check the car’s real
physical address easily by mobile SMS or carry out online tracking by website. It
also has reliable car alarm function with optional wireless immobilizer.
Read it Firstly:
Please read this manual thoroughly before you use the device; please keep
it for future reference.
Attention:
(1) Please keep the device away from water, humidity, high temperature,
heavy dust or strong magnetism.
(2) Please prepare a valid GSM SIM card in advance.
Warning:
We strongly suggest user let the professional car electrician to install the
system.
Page2
TK210 GPS Car Alarm User Manual
Page3
TK210 GPS Car Alarm User Manual
User can use any mobile phone to call the tracker’s SIM number, the tracker
will automatically send back the SMS including the Google map’s URL, user
can use smart phone(be able to visit internet) to open the URL link, the car’s
location will be showed on the Google map.
Note:
The SIM card inside the tracker must be activated with the service of caller’s ID
display.
User can send SMS instruction to operate the tracker by any mobile phone,
the format of the instruction is:
User Password(******)+ Control Code(XXX)
The default user password is 111111.
If the user password is changed, user should send the SMS instruction with
the new user password instead of 111111.
XXX is the control code, all the letters must be capital letters
There is no space between the user password & the control instruction.
Page4
TK210 GPS Car Alarm User Manual
Page5
TK210 GPS Car Alarm User Manual
The system will send back the SMS, includes the similar information, such
as “Car is Armed……”
Page6
TK210 GPS Car Alarm User Manual
Page7
TK210 GPS Car Alarm User Manual
When the over-speed alert function is activated, if the car is running over the
speed limitation, the tracker will send out alert message.
Remark: this function is just for reference, because there might be some
time delay or error in detecting the running car’s real speed by GPS.
111111SHK0
Normal status, when sensor is activated, it will trigger the alarm
immediately. If the ultrasonic sensor, it is better to use this setting.
111111SHK1
Time-delay status, if the sensor is activated for 3 seconds continuously, it
will trigger the alarm immediately. If the vibration sensor, it is better to use this
Page8
TK210 GPS Car Alarm User Manual
setting.
111111REG
This instruction is used to check the GSM module’s IMEI number.
once the SOS switch is pressed down & hold for at least 3 seconds, the
system will send alarm SMS to the second alert-received mobile & the center
number. User can send command 111111RES to release it.
Ø IDN: XXXXXXXXXXXXXX;
This is to set the tracker GPRS’s ID No. and it cannot be over 14 digits.
Eg: 111111WWW:IDN:80895023557068;
Ø IPN:XXX.XXX.XXX.XXX;
This is to set the server’s IP address.
Eg: 111111WWW:IPN:98.143.144.145;
Ø COM:XXXX;
This is to set the server’s COM port No.
Eg: 111111WWW:COM:8500;
Page9
TK210 GPS Car Alarm User Manual
Ø APN:XXX;
This is to set the APN (access point name). Please use “,” to separate the APN,
APN username & APN password.
Eg: 111111WWW:APN:web.gprs.mtnnigeria.net,web,gprs;
Ø RPT:XXX;
This is to set the upload time interval. The unit is second, the value is between
15-999 seconds.
The default setting is 0, the tracker will not upload data but GPRS is online.
Eg: 111111WWW:RPT:60; (Upload time interval is every 60s)
Ø GPRS:0/1;
GPRS:0; is to close down the GPRS;
GPRS:1; is to open the GPRS.
Eg: 111111WWW:GPRS:1; (Open the GPRS connection)
The default GPRS setting for checking the car’s physical address by send
111111ADD is:
² 111111WWW:IPN:98.143.144.145;COM:8500;
² 111111WWW:APN:internet;RPT:0;GPRS:1;
Page10
TK210 GPS Car Alarm User Manual
IV. Specifications
FAQ Troubleshooting
Page11
TK210 GPS Car Alarm User Manual
VI. Installation
Page12
TK210 GPS Car Alarm User Manual
Wiring Diagram
Page13
TK210 GPS Car Alarm User Manual
(1) Please read the manual carefully before installation and make sure you
understand the installation instruction and the car circuit & wiring firstly. We
strongly advise you to ask professional car electricians to do the installation.
(2) Please prepare a valid GSM card (not CDMA card at present) with Caller ID
Display & GPRS function. And use an ordinary mobile phone to check the
power-on password (need to decode first) and the SMS has sending & receiving
function.
Note: installation for SIM card
Switch off the main unit power, and then use a pin to press the yellow button
and then insert SIM card (remember the card number)
Installation Explanation
(1) Please choose the best place for installing the tracker & parts
according to the car.
①Fix the Main Unit
Choose a place for the main unit first. Please fix the main unit at a secret place
to avoid being destroyed by theft. Please keep it away from the
high-temperature, humidity or strong magnetic object (such as reversing radar,
alarm). Please fasten it tightly. (Recommended places: trunk, under seat, under
dashboard)
②Fix the GPS antenna
While fixing the GPS antenna, the flat magnetic side must be placed downside.
Make sure there are not any metal or shielded obstacles around the upside of
the GPS antenna, so that it can receive the satellite signal from upside the sky
very well, the GPS antenna should be placed at broad & secret place too. It
should be drew straight and kept away from the sound box or speaker.
(Recommended places: Upside & inner part of the door rim, car top, secret
place of front windshield, under bumper)
③Fix the GSM antenna
Fix the GSM antenna upside the sky and leave some space so that it can
receive signals very well. And keep it a certain distance from other wireless
equipments. It is better fixed at a secret place where it can work well.
④Fix the microphone
Please fix the microphone at a secret place of the front car where it can work
well (not near the door).
(Recommended place: front window-shadow, near the console, behind the
Page14
TK210 GPS Car Alarm User Manual
reversing mirror)
⑤Fix the SOS button
Please fix the SOS button under the left of the dashboard.
⑥Fix the relay
Cut off the gas pump supply (inside the fuse box) and connect the two lines
separately with the two relay lines (green) and fasten with the insulating tapes.
Note: The default circuit breaker is of 12V, with 24V automobile storage
batteries. The user should accordingly\ match 24V circuit breaker; if matching
12v circuit breaker with 24v storage battery, the user may choose one from the
2 12v series connected storage batteries to connect with the vehicle, otherwise
the circuit breaker may be easy to burn down.
○7 Fix the central locking signal wire
When fixing the central locking signal line, you should pay attention to the line
colors. If you connect the lines wrongly, the will not be able to arm/disarm the
systems. And remember to connect the central lock’s motor signal lines.
⑧Fix the ACC ignition wire
Connect the ACC ignition wire with the ignition ON position.
○9 Fix the door switch wire
Connect the door switch wire with the side-door switch or the ceiling light wire.
1○0Fix other wires
Fix the wires in proper places according to the terminal.
(2) Check the wires: check the wire that need to be connected with for
allocation functions and make some remarks so that you can easily connect the
wires.
(3) Wiring: 1. Try to use the original screws to fix the devices. 2. Choose secret
places for wiring and fixing the devices. 3. Fasten tightly the junction point of
accessories and wires. 4. Insulation and precaution.
After wiring and fixing all the accessories, check the installation with
reference to the instruction and wiring diagram.
(4) Fix the power supply wire: 1. After checking all the work above, fix the
power wire. 2. The power supply voltage is between 9V~15V and fit for 12V
storage battery (for the 24V storage battery, you need customized device. 3.
The positive wire is red and negative black. 4. Connect the power supply wire
directly with the storage battery. 5. Check the connections and junctions again
and the switch on the main power supply.
Note: Try to fix the systems according to the steps above. Do not supply
power when installing.
After connecting the main power supply, the system will be initialized for 60s,
after that you can switch on the backup battery and do the test accordingly. After
testing, you can restore the car. (Attention: if you want to change the SIM
card or disassemble the system, you should switch off the power supply
firstly.)
Page15
TK210 GPS Car Alarm User Manual
VII. Maintenance
Suggestions
Page16