Professional Documents
Culture Documents
Gas Systems
Hamworthy is a leading supplier of not only gas carrier cargo handling technology but also design and manufacture of key cargo handling equipment. For LPG and Ethylene carriers we offer single source services including engineering of complete cargo handling systems, tank design and supply cargo handling equipment such as reliquefaction and cooling systems for liquid
Hamworthy designs and supplies heaters and vaporisers for boil off gas, reliquefaction plants, inert gas generators and nitrogen generators for LNG carriers, as well as VOC recovery systems for shuttle tankers and terminals.
Reliquefaction plants
Skid mounted units ready to be installed onboard
The plants are delivered complete and tested, with all components; internal piping, valves, instrumentation and control devices. Plants can be operated locally or via a remote control by conventional instrumentation or through an integrated computer control system. A typical skid unit will include a section of the partition bulkhead between the compressor and the motor-room to simplify the installation and alignment. Cargo compressors used are of the reciprocating oil-free type such We supply reliquefaction plants based on direct condensation for LPG carriers and cascade systems for Ethylene carriers. as Burckhardt, suitable for various cargoes and pressures in multi-purpose gas carriers. The cascade systems for Ethylene and Ethane are designed for boiling point down to -104C. The advantages achieved are lighter weight, better efficiency, expected lower life cycle cost and easy maintenance. The units are also equipped with pulsation dampers in the piping system to minimise vibration.
The LPG systems are designed for cargoes with boiling point down to -50C. Typical cargoes that can be handled are Propane, Propylene, Butane, Butadiene, Ammonia and VCM.
To meet the increasing environmental anti-pollution requirements, all plants are designed to prevent cargo vapour leakage.
Cascade plants have screw compressors applied for the cooling With respect to cargo condensers, our standard of adopting plate type heat exchangers of fully welded plate type in Titanium is considered state-of-the-art for the industry. circuit with application of non-CFC refrigerants. The experience of using Propane for this purpose is good and Hamworthy has converted many systems from R22 to Propane.
Reliquefaction unit with plate type condenser in titanium and pulsation dampers
The plants are delivered as skid mounted units either for installation and operation in deck housing or on open deck in EX-zone.
the loading rate when loading hot cargoes. On FSOs and FPSOs the plant is cooling hot gas from the upstream process plant before it is expanded into the cargo tanks.
Propane is the preferred refrigerant for the cooling plants. Compressors will typically be of the screw type.
Heat exchangers
Heat exchangers are manufactured in accordance with Hamworthys design and are applied to various duties including condensers, heaters, vaporisers and intermediate coolers. Shell and tube type heat exchangers for heating of LPG cargo are delivered with high Nickel alloy stainless steel or Titanium tube-stacks.
For cargo heating applications seawater is typically circulated on the shell side to prevent freezing and tube cracking, avoiding cargo leakage.
Gas systems
for LPG-FSOs / FPSOs and Offshore Applications
Hamworthy has delivery references for purpose built LPG-FSOs and FPSOs where we have designed, manufactured and supplied LPG cooling plants, reliquefaction plants, inert gas generators, nitrogen generators and cargo pumps.
Both LPG-FSO and FPSO new-build barges and conversions of VLGCs have been equipped with cargo handling systems from Hamworthy. The systems have been designed according to the applicable rules for the actual project, ie from offshore rules to standard ship rules.
Sanha LPG FPSO
Professional
project management
Assistance will be given to ensure complete project management of the installation from conception through to operation and through-life support.
General arrangement Outline specification Tank design Systems engineering Arrangement drawings P & I diagrams Installation drawings Equipment supply Installation supervision Commissioning/IMO certification assistance Gas trial assistance Instruction manual Troubleshooting Spares & maintenance
tel: +47 815 48500 fax: +47 815 48510 e-mail: gasinfo@hamworthy.com web: www.hamworthy.com
The manufacturers reserve the right to alter the specification and data to incorporate improvements in design. Certified drawings will be issued on request.