Professional Documents
Culture Documents
igubal
Spherical bearings made of high performance plastics igubal Spherical Balls igubal housing made of igumid G Loads Coefficients of Sliding Friction and Speed Application Temperatures Chemical Resistance Radiation Resistance UV Resistance P. P. P. P. P. P. P. P. P.
igubal Overview
igubal Rod End Bearings igubal Clevis Joints igubal Pillow Blocks
GERI- ... GELI- ... Page 29.3 GERM-... GELM-... Page 29.4
KARM- ... KALM- ... Page 28.10 KARM- ..(MH) KALM- ..(MH) Page 28.10
KBRM- ... KBLM- ... Page 28.12 KBRM- ..(MH) KBLM- ..(MH) Page 28.12
Section 28
Section 29
Section 30
KGLI- ... Page 32.3 KGLM- ... Page 32.4 EGLM- ... Page 32.5
Section 31
Section 32
Section 33
Section 34
igubal igubal
igubal Bearings
igubal self-aligning maintenance-free plain bearings made of high-performance plastics
Bearings
igubal puts a complete system of self-aligning bearing elements spherical bearings, pillow block spherical bearings and rod end bearings at the developers fingertips. Self-aligning bearings are easy to install, adapt to all angular deviations and replace special housings in many cases. With igubal, the user can take advantage of all the benefits of high-performance plastics: vibration dampening, ability to operate in liquids or chemicals, and resistance to dirt and dust which can impede the performance of greased metal components. They are very lightweight: 80% lighter than steel. They save on installation space because of their small dimensions, and can save on cost at the time of purchase and in operation. igubal bearings are also extremely cost competitive due to the elimination of maintenance and installation costs. Some models of the igubal product line
1-888-803-1895 1-401-438-7680
igubal
Advantages of igubal
cost-effective maintenance-free lubrication-free resistant to dust and dirt corrosion-free can be used in liquid media
vibration dampening inner race set in housings with very low clearance dirt can become embedded for shaft protection
Telephone Fax
igubal flange bearings in reflector telescopes at La Palma, Spain, in the adjustment of the individual reflectors
Advantages:
tough, resistant thermoplastic alloy very low coefficients of friction while running dry high service life vibration dampening very good abrasion resistance excellent wear resistance Maintenance-free very good chemical resistance suitable for rotating, oscillating and linear movements also suitable for soft shafts
Advantages:
lightweight high mechanical strength shock and impact resistant corrosion-free chemically resistant dimensionally stable
igubal flange bearings as drive bearings in a conveyor system for bakery products
27.4
igubal Bearings
igubal
Effect of the speed of load application on the maximum tensile strength of igubal rod end bearings
Application Temperatures
igubal bearing elements can be used in temperatures from -22 to 176F. The chart shows the effect of temperature on the loading capacity of the igubal bearing elements.
Application Temperatures Minimum Maximum, long-term Maximum, short-term + + 22F 176F 248F
Effect of the temperature on the maximum tensile strength of igubal rod end bearings
Medium
Resistance Resistant Resistant Not Resistant Resistant Conditionally Resistant Resistant Conditionally Resistant Not Resistant Resistant Conditionally Resistant
Chemical Resistance
Both the spherical ball made of iglide L280 and the housing made of igumid G are resistant to weak lyes, weak acids and fuels, as well as all types of lubricants. You will find a chemicals table starting on Page 1.16. The moisture absorption of igubal with iglide L280 is approximately 1.3% of weight in standard atmosphere. The saturation limit in water is 6.5%. The moisture absorption of igubal with iglide R is approximately .2% of weight in standard atmosphere. The saturation in water is 1.1%. This must be taken into account for these types of applications.
Alcohol Chlorinated hydrocarbons Ester Greases, oils Ketones Fuels Weak acids Strong acids Weak lyes Strong lyes
The load capacity of the maintenance-free igubal bearing elements is very high at normal ambient temperatures. igubal bearing elements absorb high forces and weigh only a fifth of traditional, metal bearing housings. The excellent dampening properties are based on the fact that the plastic material of the two-part bearing can absorb vibrations differently than steel. However, plastic-specific properties, such as temperature and behavior under long-time stressing, must be taken into consideration when using igubal bearings. The load capacity should therefore be checked in a performance test, particularly if they are to be used under continuous high loads and at elevated temperatures.
igubal Bearings
Loads
105
27.5
igubal igubal
Radiation Resistance
igubal Bearings
Self-aligning igubal plain bearings are resistant to radiation up to an intensity of 3 x 102 Gy.
UV Resistance
The corrosion resistance of the igubal bearings give them special value for outside applications. igubal bearing elements are permanently resistant to UV radiation. A small change in color (dark coloration) of the spherical ball due to UV radiation does not effect the mechanical, electrical or thermal properties.
1-888-803-1895 1-401-438-7680
Areas of Application
igubal bearing elements can be used without problems even in harsh environments. In moist or wet environments, the bearings are corrosion-resistant, and resistant to weak acids and lyes. The application temperatures range from -22 to 176F. Resistance to dirt and dust is outstanding. Seals are not necessary, even in extremely contaminated conditions. This is true for fine dust as well as coarse dirt, which is present in agricultural equipment. The housing is made of an impact-resistant composite material which tolerates high alternating loads.
Telephone Fax
igubal rod end bearings in the spring loaded rear axle of a bicycle
igubal rod end bearing and spherical ball in a linear position sensor
27.6
1-888-803-1895 1-401-438-7680
Loads
igubal rod end bearings handle high loads at normal room temperatures, have excellent dampening properties and weigh only a fifth of traditional metallic rod end bearings. In applications with high continuous loads and high temperatures, the loading capacity of igubal rod end bearings should be tested in an experiment that duplicates the application.
Telephone Fax
Effect of the speed of load application on the maximum tensile strength of igubal rod end bearings
Effect of the temperature on the maximum tensile strength of igubal rod end bearings
28.2
Product Range
igubal rod end bearings are available in the dimensional series K and E for shaft diameters of .1875 to 1.00 (2 to 30 mm). G Type A - with outer threads G Type B - with inner threads The dimensional series K is available in inch dimensions, as well as a special version containing a stainless steel sleeve in the inner race. This allows a significantly higher torque than for the standard plastic race. Please ask us about quantities, availability and pricing.
igubal rod end bearings in the spring loaded rear axle rocker of a bicycle
Tolerances
igubal rod end bearings can be used at different tolerances depending on the individual application. As a standard program, they are designed with a large amount of bearing clearance, which permits secure operation even at high rotational speeds. The bore of the inner race is produced within a standard tolerance range. Shafts should also meet recommended tolerances. Please contact us with any questions regarding tolerances. Tolerance Table, Page 1.14
Thread Name M2 M3 M4 M5 M6 M8 M 10 M 10 F M 12 M 12 F M 14 M 16 M 16 F M 18 M 20 M 20 M 20 M 22 M 24 M 27
Pitch (mm) 0.40 0.50 0.70 0.80 1.00 1.25 1.50 1.25 1.75 1.25 2.00 2.00 1.50 1.50 2.50 1.50 1.50 2.00 2.00 igubal rod end bearings in a candy decorating machine igubal rod end bearings in the closing mechanism of an outdoor security gate
inch
mm
28.3
KARI KALI Series K Standard design with inch dimensions Page 28.6
KBRI KBLI Series K Standard design with inch dimensions Page 28.7
EBRI EBLI Series E Standard design with inch dimensions Page 28.8
KARM KALM Series K Standard design with metal sleeve (MH) Page 28.10
Page 28.16
KBRM KBLM Series K Standard design with metal sleeve (MH) Page 28.12
Page 28.18
28.4
Nominal inside diameter Design CL = 2nd generation - only K series offering ability to change spherical ball material F = fine thread pitch HT = high temperature MH = with metal sleeve J J4 R X = with spherical ball made from iglide J = with spherical ball made from iglide J4 = with spherical ball made from iglide R
The example given is the number for a rod end bearing of the dimensional series K with metric inner-right threading. The inner diameter of the spherical ball is 10 mm. It is a special design with a metal sleeve. For the most part, the thread diameter of the bolt corresponds to the inner diameter here it is M10. However, please pay attention to the following tables. *The E series bearing is slightly thinner and costs less than its K series counterpart.
inch
mm
28.5
KARI / KALI
G G G G G G G G G
maintenance-free, self-lubricating high strength under impact loads very high tensile strength for varying loads compensation for alignment errors compensation for edge loads resistant to dirt, dust and lint resistant to corrosion and chemicals high vibration dampening capacity suitable for rotating, oscillating, and linear movements G lightweight G dimensional series K according to standard DIN ISO 12240
B C1 d2
30 d1 dk
Load Data
d3
Right Thread
LeftThread
Maximum static Tensile Strength Short-term Long-term lbs lbs 87 202 247 337 449 562 786 876 45 101 123 168 224 281 393 438
Maximum Radial Load Short-term Long-term lbs lbs 15 22 33 78 89 101 134 224 7 11 16 39 45 50 67 112
Minimum Thread Depth (inch) .525 .700 .875 .875 .962 1.050 1.137 1.226
Maximum Torque Strength through ball ft lbs .37 .74 1.48 2.21 4.43 6.64 8.85 18.44
Maximum Thread Strength ft lbs 2.21 2.95 7.38 11.06 18.44 25.82 36.88 51.63
Dimensions (inch)
RightThread KARI-03 KARI-04 KARI-05 KARI-06 KARI-07 KARI-08 KARI-10 KARI-12 Left Thread KALI-03 KALI-04 KALI-05 KALI-06 KALI-07 KALI-08 KALI-10 KALI-12 d1
E10
Left Thread KALI-03 KALI-04 KALI-05 KALI-06 KALI-07 KALI-08 KALI-10 KALI-12
Shaft Min. .1888 .2485 .3110 .3735 .4358 .4983 .6233 .7479 Max. .1900 .2500 .3125 .3750 .4375 .5000 .6250 .7500
28.6
L1
L2
Load Data
Right Thread Left Thread Maximum static Tensile Strength Short-term Long-term
lbs lbs
d3 W
d4
Dimensions (inch)
RightThread KBRI-03 KBRI-04 KBRI-05 KBRI-06 KBRI-07 KBRI-08 KBRI-10 KBRI-12 KBRI-16 RightThread KBRI-03 KBRI-04 KBRI-05 KBRI-06 KBRI-07 KBRI-08 KBRI-10 KBRI-12 KBRI-16 Left Thread KBLI-03 KBLI-04 KBLI-05 KBLI-06 KBLI-07 KBLI-08 KBLI-10 KBLI-12 KBLI-16 Left Thread KBLI-03 KBLI-04 KBLI-05 KBLI-06 KBLI-07 KBLI-08 KBLI-10 KBLI-12 KBLI-16 d1
E10
d2 .625 .750 .875 1.000 1.125 1.312 1.500 1.750 2.750 Shaft Min. .1888 .2485 .3110 .3735 .4358 .4983 .6235 .7479 .9980
Max. .1900 .2500 .3125 .3750 .4375 .5000 .6250 .7500 1.000
maintenance-free, self-lubricating high strength under impact loads very high tensile strength for varying loads compensation for alignment errors compensation for edge loads resistant to dirt, dust and lint resistant to corrosion and chemicals high vibration dampening capacity suitable for rotating, oscillating and linear movements G very low weight G dimensional series K according to standard DIN ISO 12240
30 d1 dk
L3
h1
L4
inch
mm
28.7
KBRI / KBLI
C1
d2
G standard ball made from iglide L280, other options are available G maintenance-free, self-lubricating G high strength under impact loads G very high tensile strength for varying loads G compensation for alignment errors G compensation for edge loads G resistant to dirt, dust and lint G resistant to corrosion and chemicals G high vibration dampening capacity G suitable for rotating, oscillating, and linear movements G lightweight G dimensional series E according to standard DIN ISO 12240
1-888-803-1895 1-401-438-7680
EBRI / EBLI
Load Data
RightThread LeftThread Max. static Tensile Strength
Short-term lbs Long-term lbs
EBRI-03
17 22 51 56 62 62 90 202
8 8 11 13 14 14 18 22
Telephone Fax
28.8
d2
B C1
l4
d4 d5
d3 W
Dimensions (inch)
RightThread EBRI-03 EBRI-04 EBRI-05 EBRI-06 EBRI-07 EBRI-08 EBRI-10 EBRI-12 Left Thread EBLI-03 EBLI-04 EBLI-05 EBLI-06 EBLI-07 EBLI-08 EBLI-10 EBLI-12 d1
E10
d2
d3
0.748 10/32 0.3543 0.4331 0.827 0.945 1.142 1.339 1.339 1.693 2.087 1/4 5/16 3/8 7/16 1/2 5/8 3/4
l3
50
Page 35.2
h1
inch
mm
28.9
EBRI / EBLI
d1
maintenance-free self-lubricating high strength under impact loads very high tensile strength for varying loads compensation for alignment errors compensation for edge loads resistant to dirt, dust and lint resistant to corrosion and chemicals high vibration dampening capacity suitable for rotating, oscillating and linear movements lightweight dimensional series K according to standard DIN ISO 12240 design with a metal sleeve in the inner race for increased thread strength
KARM / KALM
1-888-803-1895 1-401-438-7680
Load Data
RightThread LeftThread Max. static Tensile Strength
Short-term lbs Long-term lbs
KARM-05 KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-22
KALM-05 KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-22 KALM-25 KALM-30
180 225 382 562 562 607 607 764 876 876 944 1348 1348 1618 1686 1978
90 112 191 281 281 303 303 382 438 438 472 674 674 809 843 989
13 15 18 20 20 22 22 25 26 26 29 32 32 34 39 46
.3 .4 1.5 3.7 2.2 4.4 4.4 8.9 12.5 12.5 14.8 18.4 18.4 18.4 33.2 62.7
3.7 7.4 8.9 14.8 14.8 22.1 22.1 25.8 29.5 29.5 33.2 40.6 40.6 44.3 47.9 51.6
8.8 11.1 29.5 36.9 36.9 51.6 51.6 55.3 81.1 81.1 110.6 147.5 147.5 166.0 191.8 221.3
Telephone Fax
KARM-25 KARM-30
28.10
L2
d3
Dimensions (mm)
RightThread KARM-05 KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30 LeftThread KALM-05 KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30 d1
E10
d2 18 20 24 30 30 34 34 38 42 42 46 50 50 56 60 70
d3 M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M18 x 1.5 M20 x 2.5 M20 x 1.5 M22 x 1.5 M24 x 2.0 M30 x 2.0
C1 6.0 7.0 9.0 10.5 10.5 12.0 12.0 13.5 15.0 15.0 16.5 18.0 18.0 20.0 22.0 25.0
B 8.0 9.0 12.0 14.0 14.0 16.0 16.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 31.0 37.0
h 33 36 42 48 48 54 54 61 66 66 72 78 78 84 94 110
L1 19 21 25 28 28 32 32 36 37 37 41 45 45 48 55 66
5 6 8 10 10 12 12 14 16 16 18 20 20 22 25 30
RightThread KARM-05 KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-22 KARM-25 KARM-30
LeftThread KALM-05 KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-22 KALM-25 KALM-30
Shaft Min. 4.970 5.970 7.964 9.964 9.964 11.957 11.957 13.957 15.957 15.957 17.957 19.948 19.948 21.948 24.948 29.948 Max. 5.000 6.000 8.000 10.000 10.000 12.000 12.000 14.000 16.000 16.000 18.000 20.000 20.000 22.000 25.000 30.000
dk 11.10 12.70 15.80 19.00 19.00 22.20 22.20 25.40 28.50 28.50 31.70 34.90 34.90 38.10 42.80 50.80
Rod end bearings can be ordered in metric dimensions with metal sleeve with the addition of MH after the part numbers listed here, i.e. for example: KARM-10 MH Available for delivery
L1
inch
mm
28.11
KARM / KALM
d1
dk
B C1 d2
KBRM / KBLM
d1
dk
Standard Design
L3
d3 W
d4 d5
Special properties
1-888-803-1895 1-401-438-7680
G G G G G G G G G G G G Maintenance-free dry running high strength under impact loads very high tensile strength for varying loads compensation for alignment errors compensation for edge loads resistant to dirt, dust and lint resistant to corrosion and chemicals high vibration dampening capacity suitable for rotating, oscillating and linear movements lightweight dimensional series K to standard DIN ISO 12240 design with a metal sleeve in the inner race for increased torque strength
Telephone Fax
Load Data
RightThread LeftThread Max. static Tensile Strength
Short-term lbs Long-term lbs
KBRM-02 KBRM-03 KBRM-05 M4 KBRM-05 KBRM-06 KBRM-08 KBRM-10 KBRM-10 F KBRM-12 KBRM-12 F KBRM-14 KBRM-16 KBRM-16 F KBRM-18 KBRM-20 KBRM-20 M20 KBRM-22 KBRM-25 KBRM-30
KBLM-02 KBLM-03 KBLM-05 M4 KBLM-05 KBLM-06 KBLM-08 KBLM-10 KBLM-10 F KBLM-12 KBLM-12 F KBLM-14 KBLM-16 KBLM-16 F KBLM-18 KBLM-20 KBLM-20 M20 KBLM-22 KBLM-25 KBLM-30
134 179 224 224 314 472 696 696 809 809 899 944 944 1034 1213 1213 1573 1910 2360
67 89 112 112 157 236 348 348 404 404 449 472 472 517 606 606 786 955 1180
13 22 56 56 89 157 179 179 202 202 224 292 292 359 472 472 494 517 562
6 11 28 28 44 78 89 89 101 101 112 146 146 179 236 236 247 258 281
4 5 7 7 8 11 13 13 15 15 17 19 19 21 22 22 25 28 34
.22 .37 .55 .74 1.10 7.4 11.1 4.4 14.8 11.1 18.4 22.1 20.3 33.2 59.0 44.3 55.3 88.5 99.5
.74 1.5 3.7 3.7 7.4 8.9 14.8 14.8 22.1 22.1 25.8 29.5 29.5 33.2 40.6 40.6 44.3 44.3 44.3
h1
1.5 3.0 8.9 8.9 11.1 29.5 36.9 36.9 51.6 51.6 55.3 81.1 81.1 110.6 147.5 147.5 166.0 191.8 221.3
28.12
L4
Dimensions (mm)
RightThread KBRM-02 KBRM-03 KBRM-05 M4 KBRM-05 KBRM-06 KBRM-08 KBRM-10 KBRM-10 F KBRM-12 KBRM-12 F KBRM-14 KBRM-16 KBRM-16 F KBRM-18 KBRM-20 KBRM-22 KBRM-25 KBRM-30 Leftthread KBLM-02 KBLM-03 KBLM-05 M4 KBLM-05 KBLM-06 KBLM-08 KBLM-10 KBLM-10 F KBLM-12 KBLM-12 F KBLM-14 KBLM-16 KBLM-16 F KBLM-18 KBLM-20 KBLM-22 KBLM-25 KBLM-30 d1
E10
d2 9 13 18 18 20 24 30 30 34 34 38 42 42 46 50 50 56 60 70
d3 M02 M03 M04 M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M18 x 1.5 M20 x 2.5 M20 x 1.5 M22 x 1.5 M24 x 2.0 M30 x 2.0
d4 4.0 6.5 9.0 9.0 10.0 13.0 15.0 15.0 18.0 18.0 20.0 22.0 22.0 25.0 28.0 28.0 30.0 32.0 37.0
d5 4.6 8.0 12.0 12.0 13.0 16.0 19.0 19.0 22.0 22.0 25.0 27.0 27.0 31.0 34.0 34.0 37.0 41.0 50.0
C1 3.0 4.5 6.0 6.0 7.0 9.0 10.5 10.5 12.0 12.0 13.5 15.0 15.0 16.5 18.0 18.0 20.0 22.0 25.0
B 4 6 8 8 9 12 14 14 16 16 19 21 21 23 25 25 28 31 37
l3 6 8 10 10 12 16 20 20 22 22 25 28 28 32 33 33 37 42 51
W SW04 SW06 SW09 SW09 SW11 SW14 SW17 SW17 SW19 SW19 SW22 SW22 SW22 SW27 SW30 SW30 SW32 SW36 SW41
2 3 5 5 6 8 10 10 12 12 14 16 16 18 20 20 22 25 30
RightThread KBRM-02 KBRM-03 KBRM-05 M4 KBRM-05 KBRM-06 KBRM-08 KBRM-10 KBRM-10 F KBRM-12 KBRM-12 F KBRM-14 KBRM-16 KBRM-16 F KBRM-18 KBRM-20 KBRM-20 M20 KBRM-22 KBRM-25 KBRM-30
LeftThread KBLM-02 KBLM-03 KBLM-05 M4 KBLM-05 KBLM-06 KBLM-08 KBLM-10 KBLM-10 F KBLM-12 KBLM-12 F KBLM-14 KBLM-16 KBLM-16 F KBLM-18 KBLM-20 KBLM-20 M20 KBLM-22 KBLM-25 KBLM-30
Shaft Min. 1.975 2.975 4.970 4.970 5.970 7.964 9.964 9.964 11.957 11.957 13.957 15.957 15.957 17.957 19.948 19.948 21.948 24.948 29.948 Max. 2.000 3.000 5.000 5.000 6.000 8.000 10.000 10.000 12.000 12.000 14.000 16.000 16.000 18.000 20.000 20.000 22.000 25.000 30.000
dk 5.20 7.90 11.10 11.10 12.70 15.80 19.00 19.00 22.20 22.20 25.40 28.50 28.50 31.70 34.90 34.90 38.10 42.80 50.80
Rod end bearings can be ordered in metric dimensions with metal sleeve with the addition of MH after the part numbers listed here, i.e. for example: KBRM-10 MH Available for delivery
inch
mm
28.13
KBRM / KBLM
d2
KARM CL
l2
Special properties
1-888-803-1895 1-401-438-7680
G G G G G G Smooth design has no dirt traps Compensation for alignment errors Light weight Excellent corrosion resistance Design with metal isleeve for higher torque strength available Left-hand thread version KALM in preparation
d3
Telephone Fax
Load Data
Part Number Maximum static tensile strength short-term long-term (lbs) (lbs) 225 382 562 607 113 191 281 304 Maximum radial load short-term long-term (lbs) (lbs) 22 45 68 90 11 22 34 45 Minimum thread depth (mm) 15 18 20 22 Max. torque strength outside thread (lbs ft) .369 1.475 3.688 4.425 Max. torque though Ball standard MH (lbs ft) (lbs ft) 7.376 8.851 14.750 22.130 11.060 29.500 36.880 51.630
Dimensions (mm)
Internet: http://www.igus.com E-Mail: sales@igus.com QuickSpec: www.igus.com/qs/igubal.asp
Part Number KARM-06 CL KARM-08 CL KARM-10 CL KARM-12 CL d1 E10 6 8 10 12 d2 20 24 30 34 d3 M06 M08 M10 M12 C1 7.0 9.0 10.5 12.0 B 9.0 12.0 14.0 16.0 h 36 42 48 54 l1 21 25 28 32 l2 46 55 63 71 Max. pivot angle 40 35 35 35
For rod end bearings with metal insert please add MH to the part number, e.g. KABM-10 CL MH. For another spherical bearing material please add J, R or X to the part number, e.g. KARM-10 CL J.
Page 35.2
28.14
l1
d1
B C1
d2
d1
Special properties
G G G G G G
Smooth design has no dirt traps Compensation for alignment errors Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Left-hand thread version KBLM in preparation
Load Data
Part Number Maximum static tensile strength short-term long-term (lbs) (lbs) Maximum radial load short-term long-term (lbs) (lbs) Minimum thread depth (mm) Max. torque strength outside thread (lbs ft) Max. torque though Ball standard MH (lbs ft) (lbs ft)
90 158 180
45 79 90
8 11 13
Dimensions (mm)
Part Number KBRM-06 CL KBRM-08 CL KBRM-10 CL d1
E10
d2 20 24 30
B 9 12 14
C1 7 9 10,5
h 40 48 58
h2 30 36 43
L2 20 25 30
6 8 10
For rod end bearings with metal insert please add MH to the part number, e.g. KRBM-10 CL MH. For another spherical bearing material please add J, R or X to the part number, e.g. KBRM-10 CL J.
Page 35.2
h1
h2
L2
inch
mm
28.15
KBRM CL
Special properties
G G G G G G G G G G maintenance-free, self-lubricating high strength under impact loads very high tensile strength for varying loads compensation for alignment errors compensation for edge loads resistant to corrosion and chemicals high vibration dampening capacity suitable for rotating, oscillating, and linear movements lightweight dimensional series E according DIN ISO 12240
EARM / EALM
1-888-803-1895 1-401-438-7680
EARM-05 EARM-06 EARM-08 EARM-10 EARM-10 F EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-25 EARM-30
EALM-05 EALM-06 EALM-08 EALM-10 EALM-10 F EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-25 EALM-30
123 191 359 584 584 674 674 1011 1124 1124 1461 1461 1910 2248
61 95 179 292 292 337 337 505 562 562 730 730 955 1124
5 9 16 28 28 33 33 45 56 56 67 67 89 112
14 14 17 19 19 20 20 24 26 26 30 30 37 46
.3 .4 1.5 3.7 2.2 4.4 4.4 9.2 12.9 15.5 22.1 18.4 33.2 62.7
1.5 1.8 5.2 10.3 10.3 18.4 18.4 22.1 25.8 25.8 29.5 29.5 40.6 51.6
Telephone Fax
Page 35.2
28.16
30 d1 dk
L2
d3
Dimensions (mm)
RightThread EARM-05 EARM-06 EARM-08 EARM-10 EARM-10 F EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-20 M20 EARM-25 EARM-30
Available for delivery
Left Thread EALM-05 EALM-06 EALM-08 EALM-10 EALM-10 F EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-20 M20 EALM-25 EALM-30
d1
E10
d2 19 21 24 29 29 34 34 40 46 46 53 53 64 73
d3 M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M20 x 1.5 M20 x 2.5 M24 x 2.0 M30 x 2.0
C1 4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 11.0 11.0 13.0 13.0 17.0 19.0
B 6 6 8 9 9 10 10 12 14 14 16 16 20 22
l1 20 20 24 27 27 29 29 34 37 37 43 43 53 65
l2 45.5 46.5 53.0 62.0 62.0 71.0 71.0 83.0 92.0 92.0 106.5 106.5 129.0 149.5
5 6 8 10 10 12 12 15 17 17 20 20 25 30
L1
inch
mm
28.17
EARM / EALM
d2
Special properties
G G G G G G G G G G G maintenance-free, self-lubricating high strength under impact loads very high tensile strength for varying loads compensation for alignment errors compensation for edge loads resistant to dirt, dust and lint resistant to corrosion and chemicals high vibration dampening capacity suitable for rotating, oscillating, and linear movements lightweight dimensional series E according to standard DIN ISO 12240
1-888-803-1895 1-401-438-7680
EBRM / EBLM
Load Data
RightThread LeftThread Max. static Tensile Strength
Short-term lbs Long-term lbs
EBRM-04 EBRM-05 EBRM-06 EBRM-08 EBRM-10 EBRM-10 F EBRM-12 EBRM-12 F EBRM-15 EBRM-17 EBRM-17 F EBRM-20
EBLM-04 EBLM-05 EBLM-06 EBLM-08 EBLM-10 EBLM-10 F EBLM-12 EBLM-12 F EBLM-15 EBLM-17 EBLM-17 F EBLM-20 EBLM-25 EBLM-30
180 292 337 449 517 517 741 741 1079 1191 1191 1618 1618 2248 2360
90 146 168 224 258 258 370 370 539 595 595 809 809 1124 1180
22 34 45 101 112 112 124 124 180 247 247 405 405 584 674
7 8 8 11 13 13 14 14 18 19 19 22 22 27 33
.3 .4 1.1 3.7 11.1 4.4 14.8 11.1 18.4 22.1 20.3 44.3 59.0 84.8 95.9
1.5 1.5 1.8 5.2 10.3 10.3 18.4 18.4 22.1 25.8 25.8 29.5 29.5 40.6 51.6
Telephone Fax
Page 35.2
28.18
d2
l4
d4 d5
d3 W
Dimensions (mm)
RightThread EBRM-04 EBRM-05 EBRM-06 EBRM-08 EBRM-10 EBRM-10 F EBRM-12 EBRM-12 F EBRM-15 EBRM-17 EBRM-17 F EBRM-20 EBRM-20 M20 EBRM-25 EBRM-30 Left Thread EBLM-04 EBLM-05 EBLM-06 EBLM-08 EBLM-10 EBLM-10 F EBLM-12 EBLM-12 F EBLM-15 EBLM-17 EBLM-17 F EBLM-20 EBLM-20 M20 EBLM-25 EBLM-30 d1
E10
d2 15 19 21 24 29 29 34 34 40 46 46 53 53 64 73
l3
50
d3 M04 M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M16 M16 x 1.5 M20 x 1.5 M20 x 2.5 M24 x 2.0 M30 x 2.0
d4 8.0 9.0 11.0 13.0 15.0 15.0 18.0 18.0 21.0 24.0 24.0 27.0 27.0 34.0 41.0
d5 9.2 11 13 16 19 19 22 22 26 30 30 34 34 41 48
C1 3.5 4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 11.0 11.0 13.0 13.0 17.0 19.0
B 5 6 6 8 9 9 10 10 12 14 14 16 16 20 22
h1
l3
l4 30.0 39.5 40.5 48.0 57.5 57.5 67.0 67.0 81.0 90.0 90.0 103.5 103.5 126.5 146.5
W SW08 SW09 SW11 SW14 SW17 SW17 SW19 SW19 SW22 SW27 SW27 SW30 SW30 SW36 SW41
4 5 6 8 10 10 12 12 15 17 17 20 20 25 30
h1
B C1
inch
mm
28.19
EBRM / EBLM
d1
EARM HT / EALM HT
d2
B C1
l2
l1
d3
1-888-803-1895 1-401-438-7680
Special properties
G G G G G G G For temperatures up to 392 F Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation for alignment errors Compensation for edge loads Resistant to dirt, dust and lint G G G G G G Resistant to chemicals Underwater use High vibration dampening capacity Suitable for rotating, oscillating and linear movements Lightweight Dimensional series K according to standard DIN ISO 12240
Telephone Fax
Dimensions (mm)
Part Number d1 E10 L.-hand thread EALM-06 HT EALM-08 HT EALM-10 HT EALM-12 HT 6 8 10 12 21 24 29 34 M06 M08 M10 M12 4.4 6.0 7.0 8.0 6 8 9 10 36 41 47.5 54 20 24 27 29 46.5 53.0 62.0 71.0 27 24 24 21 d2 d3 C1 B h1 l1 l2 Max. pivot angle
28.20
d1
d2
B C1
l4
d4 d5
d3 W
Special properties
G G G G G G G For temperatures up to 392 F Maintenance-free, self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation for alignment errors Compensation for edge loads Resistant to dirt, dust and lint G G G G G G Resistant to chemicals Underwater use High vibration dampening capacity Suitable for rotating, oscillating and linear movements Lightweight Dimensional series K according to standard DIN ISO 12240
Dimensions (mm)
Part Number d1 E10 L.-hand thread EBLM-06 HT EBLM-08 HT EBLM-10 HT EBLM-12 HT 6 8 10 12 21 24 29 34 M06 M08 M10 M12 11.0 13.0 15.0 18.0 13 16 19 22 4.4 6.0 7.0 8.0 6 8 9 10 30 36 43 50 12 16 18 20 40.5 48.0 57.5 67.0 SW11 SW14 SW17 SW19 27 24 24 21 d2 d3 d4 d5 C1 B h1 l3 l4 W Max. pivot angle
l3
50
h1
d1
inch
mm
28.21
The most significant properties: G lightweight G universal resistance to corrosion G combined with rod end bearings of the dimensional series K G high strength under impact loads G vibration dampening G easy to install G available in left and right threads
d1 ds SW
PKRM / PKLM
E l4
l2
d3
1-888-803-1895 1-401-438-7680
Solid plastic hex bolts with pin serve as an accessory to the rod end bearings of the dimensional series K. Like all black components of the igubal bearing components, the igubal adjusting hex bolts consist of the highly shock-resistant, long-fiber reinforced plastic igumid G.
d1 (mm)
h11
d3 ConnectionThread
SW WidthAcross Flats SW 8 SW 10 SW 13 SW 16 SW 18 SW 21 SW 24 SW 27 SW 30
l1 TotalLength
(mm)
l3
l3 ThreadLength
(mm)
Telephone Fax
5 6 8 10 12 14 16 18 20
M05 M06 M08 M10 M12 M14 M16 M18 x 1.5 M20 x 1.5
Available for delivery Imperial sizes available. Minimum quantities may be required.
28.22
l1
igubal WGRM
Dimensions (mm)
Part number d1
+0.1 -0.1
d2
d4
+0.5 -0.5
l1
+0.2 -0.2
l2
+0.3 -0.3
l5
l6
min.
h3
+05 -0.5
a
+0.3 -0.3
b
+0.5 -0.5
e
+0.5 -0.5
max.
pivot angle
M5 M6 M8 M10
25 25 25 25
Load data
Part number max. axial tensile force (lbs) (ball stud axis) 6.7 7.9 56.2 112.4 max. axial compressive force (lbs) (ball stud axis) 45.0 67.4 112.4 202.3 max. axial tensile force (lbs) (housing axis) 22.5 31.5 45.0 89.9 identical experiment (lbs) (metal ball stud) 134.9 179.8 337.2 427.1
igubal AGRM
G For all mechanical combinations G Very easy assembling by hand G Proportion from cohesion to assembling force ca.10:1 G Maintenance free and predictable
Ball
Dimensions (mm)
Part No. AGRM-08 d1
+0.1 -0.1
d2 M8
d4
+0.5 -0.5
l1
+0.2 -0.2
l2
+0.3 -0.3
l6
min.
h3
+0.5 -0.5
S1 SW12
S2 SW11
a
+0.3 -0.3
b
+0.5 -0.5
e
min.
pivot angle
Recom. max.
13.0
19.3
13.0
16.5
13.5
59.0
29.5
36.5
16.0
18
25
Load data
Part No. max. static axial tensile strength short term long term (lbs) (lbs) 56.2 28.1 max. static axial compressive strength short term long term (lbs) (lbs) 224.8 112.4 max. assembling force (lbs) 24.7 measured min. cohesion (lbs) 157.4 factor max. cyclic axial tensile/ compr. force (lbs) 16.9 max. torque housing ball stud (ft lbs) (ft lbs) 3.7 1.5
AGRM-08
6.5
inch
mm
28.23
WGRM/AGRM
G Connection for rotating and oscillating movement G Lightweight and robust G Easy and fast mounting G Vibration dampening G Resistant to dirt and dust
From:
Telephone: Fax:
Please enter as much data as possible. If you prefer other measuring units, cross out the given unit and write your nest to it. Most applications questions can be answered with just a partial amount of data. Please call us if you have any questions (Tel: 1-888-803-1895) Rod End Bearing Type A Rod End Bearing Type B Pillow Block Spherical Bearing Flange Bearing Clevis Joint
1-888-803-1895 1-401-438-7680
Telephone Fax
H with pin and clip H spring loaded hasp pin HE HK H Standard thread H Fine thread
Shaft material (e.g. steel, VA, plastic): __________________________________________ __________________________________________ Average roughness Ra: ____________________ Target service life (hrs.): ____________________ Present bearing type: __________________________________________ Surrounding media (e.g. acids, water, lyes...): __________________________________________ Which problem can iglide solve for you?
Dimensional Series:
Threading:
Type of movements:
H linear __________________________________
Lubrication:
Drawing:
Shaft diameter (mm/inch): __________________ Bearing load (lbs): _________________________ Outside temperature (F):___________________
28.24
mm
inch
igubal clevis joints are all made of igumid G according to DIN 71752, which can be used in combination with the rod end bearings of the dimensional series E. Available components are clevis joint, clevis pin and clip or as an alternative, spring-loaded pin.
Part Selections
All of the components listed below are also available individually
1-888-803-1895 1-401-438-7680
Telephone Fax
Clevis joint with clevis pin and clip and rod end bearing GER(L)MKE-
The example shows a complete clevis joint assembly of the dimensional series E with inner right threading in metric dimensions. The inner diameter of the spherical ball is 12mm. The thread bore has a metric fine threading (M12 x 1.25).
29.2
Clevis joint with spring loaded pin and rod end bearing GER(L)MFE-
g d1 Chamfer 30
a1
l3 l2 l1
Dimensions (inch)
Right (Left) Thread GER(L)I-03 GER(L)I-04 GER(L)I-05 GER(L)I-06 GER(L)I-07 GER(L)I-08 d1
H9
g
h11
a1
a2
+0.3 -0.16
b1
B13
d3
+0.3 -0.3
f
+0.3 -0.3
I1
+0.5 -0.5
I2
+0.3 -0.3
I3
+0.2 -0.2
Load Data
Right (Left) Thread Max. Static Axial Tensile Strength GERM
Short-term (lbs) Long-term (lbs)
GER(L)I-03 GER(L)I-04 GER(L)I-05 GER(L)I-06 GER(L)I-07 GER(L)I-08 Tolerance Table, Page 1.14
a2
d3
inch
mm
29.3
GERI / GELI
b1
d2
G G G G
lightweight universal corrosion resistance high tensile strength Can be used in combination with rod end bearings of the dimensional series E G vibration dampening G noise dampening Chamfered end G available in left and right thread
f
Chamfer 30
l3 l2 l1
90
a1
b1
d2
Chamfered end
Load Data
1-888-803-1895 1-401-438-7680
Right (Left) Thread Max. Static Axial Tensile Strength GERM
Short-term (lbs) Long-term (lbs)
GER(L)M-04 GER(L)M-05 DIN M4 GER(L)M-05 DIN M5 GER(L)M-05 GER(L)M-06 GER(L)M-08 GER(L)M-10 GER(L)M-10 F GER(L)M-12 GER(L)M-12 F GER(L)M-14 GER(L)M-15 GER(L)M-16 GER(L)M-16 F GER(L)M-20 GER(L)M-20
179 225 225 270 314 607 1056 1056 1281 1281 1483 719 1686 1686 2136 2136
90 112 112 135 157 303 528 528 640 640 741 360 843 843 1068 1068
GER(L)MK-04 GER(L)MK-05 DIN M4 GER(L)MK-05 DIN M5 GER(L)MK-05 GER(L)MK-06 GER(L)MK-08 GER(L)MK-10 GER(L)MK-10 F GER(L)MK-12 GER(L)MK-12 F GER(L)MK-14 GER(L)MK-15 GER(L)MK-16 GER(L)MK-16 F GER(L)MK-20 GER(L)MK-20
135 202 180 202 292 472 674 674 787 787 1371 629 1573 1573 2023 2023
67 90 90 101 146 236 404 404 393 393 685 315 786 786 1012 1012
Telephone Fax
Dimensions (mm)
Internet: http://www.igus.com E-Mail: sales@igus.com QuickSpec: www.igus.com/qs/igubal.asp
Right (Left) Thread GER(L)M-04 GER(L)M-05 DIN M4 GER(L)M-05 DIN M5 GER(L)M-05 GER(L)M-06 GER(L)M-08 GER(L)M-10 GER(L)M-10 F GER(L)M-12 GER(L)M-12 F GER(L)M-14 GER(L)M-15 GER(L)M-16 GER(L)M-16 F GER(L)M-20 GER(L)M-20 d1
H9
g
h11
a1
a2
+0.3 -0.16
b1
B13
d2 ThreadTolerance 6H M4 M04 M04 M05 M06 M08 M10 M10 x 1.25 M12 M12 x 1.25 M14 M14 M16 M16 x 1.5 M20 x 1.5 M20 x 2.5
d3
+0.3 -0.3
f
+0.3 -0.3
I1
+0.5 -0.5
I2
+0.3 -0.3
I3
+0.2 -0.
4 5 5 5 6 8 10 10 12 12 14 15 16 16 20 20
8 10 10 12 12 16 20 20 24 24 28 28 32 32 40 40
8 10 10 12 12 16 20 20 24 24 27 27 32 32 40 40
8 10 10 12 12 16 20 20 24 24 27 27 32 32 40 40
4 5 5 6 6 8 10 10 12 12 14 14 16 16 20 20
8.0 9 9 10.0 10.0 14.0 18.0 18.0 20.0 20.0 24.0 24.0 26.0 26.0 34.0 34.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0
21.0 25.5 25.5 30.6 30.6 41.6 51.3 51.3 61.3 61.3 71.3 71.3 81.9 81.9 105.0 105.0
20 20 20 24.0 24.0 32.0 40.0 40.0 48.0 48.0 56.0 56.0 64.0 64.0 80.0 80.0
7.5 7.5 7.5 9.0 9.0 12.0 15.0 15.0 18.0 18.0 22.5 22.5 24.0 24.0 30.0 30.0
29.4
a2
d3
igubal - Clevis Joints dimensional series E - complete joint assembly GERMKE/GELMKE, consisting of clevis joint GERM/GELM, clevis, pin, clip, and rod end bearing of the series EBRM/EBLM
RightThread
LeftThread
b a
G G G G
single-piece construction easy to install maintenance-free can be used in combination with rod end bearings of the dimensional series E G high stability
d2
Dimensions (mm)
Part Number GEFM-04 GEFM-05 GEFM-06 GEFM-08 GEFM-10 GEFM-12 GEFM-16 d1
h11
d2 8 10 10 14 18 20 26
a 9.5 14 14 19 23 28 36
c 8 8 8 11 14 16 22
l1
0.5
l2 15 23 23 30 38 45 62
4 5 6 8 10 12 16
19 27 27 35.5 45 53 73
d1
l1 l3
l2
inch
mm
29.5
l1
GBI / GBM
Dimensions (mm)
Part Number Pin GBI-03 GBI-04 GBI-05 GBI-06 GBI-07 GBI-08 d1 .1875 .2500 .3125 .3750 .4375 .5000 d2 .1260 .1969 .1969 .2756 .3543 .3543 d .3125 .3750 .4375 .5000 .6250 .7500 l .55 .65 .85 1.05 1.25 1.40 l1 .3975 .4764 .6339 .7953 .9528 1.0709 m .0472 .0512 .0512 .0591 .0669 .0669 Clip GSR-04 GSR-08 GSR-08 GSR-10 GSR-12 GSR-12
d2 d1
1-888-803-1895 1-401-438-7680
Dimensions (inch)
Part Number Pin GBM-04 GBM-05 GBM-05 DIN GBM-06 GBM-08 GBM-10 GBM-12 GBM-14 GBM-15 GBM-16 GBM-17 GBM-20 d1 4 5 5 6 8 10 12 14 15 16 17 20 d2 3.2 4.0 4.0 4.0 5.0 7.0 9.0 12.0 12.0 12.0 12.0 15.0 d 7 8 8 9 12 15 18 22 23 24 25 30 l 12.50 16.50 14.50 16.50 21.50 27.00 31.50 36.00 36.00 42.00 42.00 51.00 l1 8 12 10 12 16 20 24 27 27 32 32 40 m 1.05 1.15 1.15 1.15 1.15 1.35 1.50 1.70 1.70 1.70 1.70 2.00 CLIP GSR-04 GSR-06 GSR-06 GSR-06 GSR-08 GSR-10 GSR-12 GSR-16 GSR-16 GSR-16 GSR-16 GSR-20
Telephone Fax
Dimensions (mm)
Part Number Pin GSR-04 GSR-06 GSR-08 GSR-10 GSR-12 GSR-16 GSR-20 d1 3.20 4.00 5.00 7.00 9.00 12.00 15.00 d2 7.0 9.0 11.0 14.0 18.5 23.0 28.0 b 1.00 1.10 1.10 1.30 1.40 1.60 1.90
d1 d2
29.6
igubal Pillow Block Bearings are bearing elements that are especially easy to install, able to compensate for alignment errors and prevent edge loads.
1-888-803-1895 1-401-438-7680
Product Range
igubal pillow block bearings can be obtained in the standard dimensions for IDs of .1900 to 1.00 and for metric sizes of 5mm to 50 mm.
Design ST = Pillow Block Measuring System M = metric I = inches Nominal dimension of the inside diameter
Telephone Fax
Areas of Application
The ability to pivot allows igubal pillow block bearings to compensate for misalignment and possible shaft deflection. Applications in which these effects cannot be prevented are suited for igubal pillow block bearings.
The example shows a pillow block bearing of the dimensional series K with metric dimensions. The spherical ball has an inner diameter of 8 mm.
Tolerances
Maintenance-free igubal pillow block bearings are designed with a tolerance in the inner diameter according to E10. The shaft should have a tolerance of H6 and h9. The recommended tolerances allow for changes in the bearing due to temperature. Tolerance Table, Page 1.14
Mounting
igubal pillow block bearings are designed for mounting with 2 bolts. Precision mounting of the bearing is not necessary, since the spherical ball compensates for alignment errors.
30.2
inch
mm
30.3
d1
h2 h1
h3
KSTI
Special Properties
m
1-888-803-1895 1-401-438-7680
G G G G G G G G G G
Maintenance-free, self-lubricating High strength under impact loads High tensile strength for varying loads Compensation for alignment errors Compensation for edge loads Corrosion-resistant Chemical-resistant High vibration dampening capacity Suitable for rotating, oscillating and axial movements Lightweight
B
X2 d3 C1
Telephone Fax
Load Data
Part Number Maximum Static Tensile Strength Short-term
(lbs)
Dimensions (inch)
Part Number KSTI-03 KSTI-04 KSTI-05 KSTI-06 KSTI-07 KSTI-08 KSTI-10 KSTI-12 KSTI-16 a 1.4000 1.7500 1.9500 2.4000 2.5000 2.8000 3.3500 3.7500 5.0000 d1
E10
30.4
h2
h3
Special Properties
m
G G G G G G G G G G
Maintenance-free, self-lubricating High strength under impact loads High tensile strength for varying loads Compensation for alignment errors Compensation for edge loads Corrosion-resistant Chemical-resistant High vibration dampening capacity Suitable for rotating, oscillating and axial movements Lightweight
B
X2
d3 C1
Load Data
Part Number Maximum Static Tensile Strength Short-term
(lbs)
Maximum Torque for Longitudinal holes 0.4 1.0 1.0 1.8 1.8 3.3 3.3 7.7 7.7 7.7 7.7 15.9
KSTM-05 KSTM-06 KSTM-08 KSTM-10 KSTM-12 KSTM-14 KSTM-16 KSTM-18 KSTM-20 KSTM-22 KSTM-25 KSTM-30
157 247 292 337 494 539 674 786 1056 1371 1483 1820
78 123 146 168 247 269 337 393 528 685 741 910
90 90 180 247 259 270 405 427 562 607 719 843
Dimensions (mm)
Part Number KSTM-05 KSTM-06 KSTM-08 KSTM-10 KSTM-12 KSTM-14 KSTM-16 KSTM-18 KSTM-20 KSTM-22 KSTM-25 KSTM-30 a 34 43 47 62 65 82 86 93 98 108 124 139 d1
E10
B 8 9 12 14 16 19 21 23 25 28 31 37
C1 6.0 7.0 9.0 10.5 12.0 13.5 15.0 16.5 18.0 20.0 22.0 25.0
h1 7 10 10 14 14 18 18 22 22 24 27 32
h2 14 18 20 26 28 34 36 42 44 48 54 64
m 25 33 33 46 46 60 60 68 68 74 86 96
d3 3.3 4.5 4.5 5.5 5.5 6.6 6.6 9.0 9.0 9.0 9.0 11.0
X2 5 6 7 8 9 11 12 13 14 16 17 20
5 6 8 10 12 14 16 18 20 22 25 30
inch
mm
30.5
KSTM
h1
Familiar characteristics such as self-adjustment and zero-maintenance are now available with dimensions of 35, 40, 45 and 50 mm.
Special Properties
G G G G G G High rigidity High fatigue strength Corrosion-proof Low weight Easy assembly and dismantling Maintenance-free spherical cap made of iglide J
d3 (2x) h2
1-888-803-1895 1-401-438-7680
h1
d1
Telephone Fax
C1 B
SW
h2 SW a m C1
Dimensions (mm)
Part Number d1
(E10)
d3
B C1
h1
KSTM-GT35* 35.0 13.5 79.0 39.5 KSTM-GT40 40.0 13.5 79.0 39.5 KSTM-GT45* 45.0 13.5 100.0 50.0 KSTM-GT50 50.0 13.5 100.0 50.0 *Diameter given by iglide J reducer **Spherical balls are also available with split design
Load data
Part Number Max. radial tensile strength Short term Long term (lbs) (lbs) 2473 2473 3372 3372 1236 1236 1686 1686 Max. axial tensile strength Short term Long term (lbs) (lbs) 562 562 674 674 281 281 337 337 Max. Torque through ball fixing holes (ft lbs) (ft lbs) 14.8 14.8 14.8 14.8 11.1 11.1 14.8 14.8
30.6
Special Properties
G G G G G G High radial loads Can be used in liquid media Space-saving design Easy to install Predictable lifetime Maintenance-free, self-lubricating
a d3 h2
h1
R1
C1 B
d2
Load Data
Part Number Max. radial tensile strength Short term Long term (lbs) (lbs) 562 764 1012 1506 1911 3035 2248 281 382 506 753 955 1517 1124 Max. radial compressive strength Short term Long term (lbs) (lbs) 967 1191 1461 1911 2473 4159 3709 483 596 731 955 1293 2079 1855 Maximum axial strength Short term Long term (lbs) (lbs) 135 157 169 247 315 517 562 67 79 84 124 157 259 281 Maximum torque in the assembly (ft lbs) .96 1.84 1.84 3.32 3.32 7.75 7.75
* Due to the different manufacturing method, the load values of the ESTM-30 are lower than ESTM-25
Dimensions (mm)
Part Number d1 d2 d3 h h1 h2 a m C1 B R1 Max. Pivot Angle 22 22 22 22 22 20 20
d1
inch
mm
30.7
ESTM
Special Properties
G G G G G G Light weight Extremly space saving Mounts with cap screws Low cost Predictable lifetime Maintenance- and lubricant-free
ESTM SL
B A d2 A
R1
B
Dimensions (mm)
Part Number d1 (H10) 5.0 6.0 8.0 10.0 d2 dk h h1 h2 a m C1 R1 Max. Pivot Angle 17 17 17 17
30.8
1-888-803-1895 1-401-438-7680
Areas of Application
Since igubal flange bearings are made for maintenance-free use, they are especially suited for applications in which access to the bearing is limited, in moist or wet environments or cleanroom environments. Thus, igubal flange bearings are also found in electric toothbrushes, awnings, conveyor technology, bakery machines and agriculture.
Telephone Fax
Installation
igubal flange bearings are designed for mounting with 2 or 4 bolts, depending on the design. The 2-hole types are provided with elongated holes, which allow a problem-free adjustment. An exact positioning of the bearing housing is not necessary, since the spherical ball compensates for alignment errors.
Dimensional Series E = dimensional series E Design F = Flange Bearing Housing O = 2-hole S = 4-hole Measuring System M = metric I = inches Nominal dimension of the inner diameter The example shows a metric 2-hole flange bearing of the dimensional series E with a spherical ball inner diameter of 10 mm.
Product Range
Internet: http://www.igus.com E-Mail: sales@igus.com QuickSpec: www.igus.com/qs/igubal.asp
igubal flange bearings with 2 and 4 mounting holes can be obtained in the standard dimensions with IDs of .190 to 1.50 and metric sizes of 5 to 30 mm. Please ask about additional dimensions.
EFOM-05
EFOM-06
EFOM-08
EFOM-10
EFOM-12
EFOM-15
EFOM-16
EFOM-17
EFOM-20
EFOM-25
31.2
EFOM-30
igubal flange bearing in the drive shaft of the outdoor cleaning machine
inch
mm
31.3
Special Properties
G G G G G G G with 4 mounting holes
dB d1
N
EFSI
housing made of igumid G spherical ball made of highly wear-resistant iglide L280 and iglide R easy to install compensation for alignment errors universal corrosion resistance lightweight maintenance-free, self-lubricating
1-888-803-1895 1-401-438-7680
Dimensions (inch)
Part Number d1 dB L Width J A1 Height of Plate .177 .177 .217 .256 .276 .276 .354 .433 .551 A1 Height of Plate .177 .177 .217 .256 .276 .276 .354 .433 Ag Height Total .311 .343 .413 .484 .520 .520 .654 .787 .965 Ag Height Total .311 .343 .413 .484 .520 .520 .654 .787 N Mounting Holes
h13
Ag A1
J L
Telephone Fax
h10
Max. Permisible Load on the Spherical Ball (lbs) 45 45 90 112 135 135 281 427 585 Max. Permisible Load on the Spherical Ball (lbs) 45 45 90 112 135 281 427 585
Max. Permissible Tensile Strength Force (lbs) 225 225 315 450 562 562 719 899 1259 Max. Permissible Tensile Strength Force (lbs) 225 225 315 450 562 562 719 899
.984 .984 1.299 1.496 1.575 1.575 2.047 2.559 2.913 L Width
.126 .126 .169 .209 .209 .209 .252 .331 .331 N Mounting Holes
h13
Part Number
h10
Page 35.2
J4VEM: Clearance-free
31.4
Special Properties
G G G G G G G with 4 mounting holes housing made of igumid G spherical ball made of highly wear-resistant iglide L280 and iglide R easy to install compensation for alignment errors universal corrosion resistance lightweight maintenance-free, self-lubricating
dB d1
J L
Dimensions (mm)
Part Number d1 dB L Width J A1 Height of Plate 4.5 4.5 5.5 6.5 7.0 8.5 9.0 10.0 11.0 14.0 15.0 Ag Height Total 8.5 8.5 10.5 12.0 13.0 15.5 16.5 18.0 20.0 25.0 26.0 N Mounting Holes
h13
h10
Max. Permisible Load on the Spherical Ball (lbs) 67 67 101 157 191 247 303 360 450 540 629
EFSM-05 EFSM-06 EFSM-08 EFSM-10 EFSM-12 EFSM-15 EFSM-16 EFSM-17 EFSM-20 EFSM-25 EFSM-30
5 6 8 10 12 15 16 17 20 25 30
14.0 14.0 18.0 22.0 25.0 30.0 32.5 35.0 40.0 48.5 55.0
25.0 25.0 33.0 38.0 40.0 49.0 52.0 54.0 65.0 74.0 85.0
17.0 17.0 22.0 26.0 28.0 34.0 36.0 38.0 45.0 52.0 60.0
3.2 3.2 4.3 5.3 5.3 6.4 6.4 6.4 8.4 8.4 10.5
Page 35.2
J4VEM: Clearance-free
inch
mm
31.5
EFSM
Ag A1
Special Properties
G Housing made of igumid G G Spherical ball made of highly wear-resistant iglide L280 and iglide R G Easy to install G Compensation for alignment errors G Universal corrosion resistance G Lightweight G Maintenance-free, self-lubricating
H J
A1 A2 A Ag
EFOI
1-888-803-1895 1-401-438-7680
dk db
d1
Telephone Fax
Part Number
N
dxl
C1
Max. Permissible Load on the Spherical Ball (lbs) 90 112 157 191 247 247 315 405 674
Max. Permissible Tensile Strength Force (lbs) 169 180 247 450 495 495 629 1236 1349
0.126 x 0.197 0.126 x 0.197 0.169 x 0.256 0.210 x 0.315 0.210 x 0.315 0.210 x 0.315 0.212 x 0.315 0.331 x 0.492 0.331 x 0.492
33 27 24 24 21 21 24 17 14
Page 35.2
31.6
J4VEM: Clearance-free
B dn
L
dn dk db
d1
dn 8.00 8.00 10.00 13.00 15.00 18.50 19.50 * 24.00 29.00 34.00 N B
dk 10.00 10.00 13.00 16.00 18.00 22.00 24.00 * 29.00 35.00 40.00 C1
dB 14.0 14.0 18.0 22.0 25.0 30.0 32.0 35.0 40.0 48.5 55.0
H 33.8 33.8 44.2 52.0 56.7 68.6 72.6 74.6 89.0 101.0 118.0 Shaft
L 16.0 16.0 22.0 26.0 31.0 36.0 38.0 41.0 47.0 58.5 65.0
J
0,1
A1 4.5 4.5 5.5 6.5 7.0 8.5 10.0 10.0 11.0 14.0 15.0
Ag 8.5 8.5 10.5 12.0 13.0 15.5 17.5 18.0 20.0 25.0 26.0
A 7.70 7.70 9.50 11.00 12.00 13.00 15.80 * 18.50 23.50 24.50
A2 5.50 5.50 6.50 7.50 8.00 8.50 11.00 * 12.00 14.75 15.00
5 6 8 10 12 15 16 17 20 25 30
24.0 24.0 31.0 36.0 41.0 50.0 53.0 55.0 65.0 75.0 87.5
dxl
Min.
Max.
Max. Permissible Load on the Spherical Ball (lbs) 56 56 156 191 247 292 314 359 404 674 787
Max. Permissible Tensile Strength Force (lbs) 169 180 247 450 495 540 629 719 1236 1349 1461
EFOM-05 EFOM-06 EFOM-08 EFOM-10 EFOM-12 EFOM-15 EFOM-16 EFOM-17 EFOM-20 EFOM-25 EFOM-30
3.2 x 5.0 3.2 x 5.5 4.3 x 6.5 5.3 x 8.0 5.3 x 8.0 6.4 x 10.0 6.4 x 10.1 6.4 x 10.2 8.4 x 12.5 8.4 x 12.6 10.5 x 16.0
6.00 6.00 8.00 9.00 10.00 13.00 13.00 * 16.00 20.00 22.00
4.40 4.40 6.00 7.00 8.00 8.50 9.50 * 13.00 17.00 19.00
4.970 5.970 7.964 9.964 11.957 14.957 15.957 16.957 19.948 24.948 29.948
5.000 6.000 8.000 10.000 12.000 15.000 16.000 17.000 20.000 25.000 30.000
33 27 24 24 21 19 24 20 17 14 12
Page 35.2
J4VEM: Clearance-free
inch
mm
31.7
EFOM
B
L
Special Properties G G G G G G G Preassembled delivery Resistant to dirt Light weight For high static loads High stiffness Predictable lifetime Maintenance-free dry running
KFSM
1-888-803-1895 1-401-438-7680
J L
A1 B
Dimensions (mm)
Part No. KFSM-GT35 KFSM-GT40 KFSM-GT45 KFSM-GT50 d1
(E10)
Telephone Fax
d1 dn
d1
L J
dk
Load data
Part No. Maximum static tensile strength short term long term (lbs) (lbs) 1124.0 1124.0 1348.8 1348.8 562.0 562.0 674.4 674.4 Maximum static axial compressive strength short term long term (lbs) (lbs) 1011.6 1011.6 1213.9 1213.9 505.8 505.8 607.0 607.0
Page 35.2
31.8
J4VEM: Clearance-free
Special Properties
G G G G G G G G G Temperatures to 392F iglide T500 highly wear resistant spherical ball Easy to install Compensation for alignment errors Corrosion resistance Light weight Maintenance-free, self-lubricating Chemical resistant Can be used under water
dB d1
J H
Dimensions (mm)
Part No d1 E10 0.1 EFOM-06 HT EFOM-08 HT EFOM-10 HT EFOM-12 HT 6 8 10 12 14,0 18,0 22,0 25,0 33,8 44,2 52,0 56,7 16,0 22,0 26,0 31,0 24,0 31,0 36,0 41,0 4,5 5,5 6,5 7,0 8,5 10,5 12,0 13,0 3,2 x 5,5 4,3 x 6,5 5,3 x 8,0 5,3 x 8,0 dB H Size L Width J Hole Pitch A1 Height of Plate Ag Height Total N Bore Diameter dxL
A1
Ag
inch
mm
31.9
KFSM
Special Properties
G G G G G G G G G Temperatures to 392F iglide T500 highly wear resistant spherical ball Easy to install Compensation for alignment errors Corrosion resistance Light weight Maintenance-free, self-lubricating Chemical resistant Can be used under water
1-888-803-1895 1-401-438-7680
Ag
A1
d1 dB
Telephone Fax
Dimensions (mm)
igubal Flange Bearing EFSM HT with 4 Mounting Holes
Part Number d1 E10 6 8 10 12 dB L Width 25.0 33.0 38.0 40.0 J Hole Pitch 0.1 17.0 22.0 26.0 28.0 A1 Height of Plate 4.5 5.5 6.5 7.0 Ag Height Total 8.5 10.5 12.0 13.0 N Bore Diameter 3.2 4.3 5.3 5.3
31.10
Telephone Fax
Dimensional series K = dimensional series K E = dimensional series E Design GL = pivoting bearing Measuring system M = metric I = inches nominal dimensions of the inner diameter The example shows a metric pivoting bearing of the dimensional series K with a pivoting ball inner diameter of 8 mm.
Area of Application
Internet: http://www.igus.com E-Mail: sales@igus.com QuickSpec: www.igus.com/qs/igubal.asp
Ease of installation makes diverse applications possible for igubal pivoting bearings. They can be used anywhere the self-adjusting feature offers design advantages or helps to simplify assembly.
Tolerances
Maintenance-free igubal pivoting bearings are meant to be oversized before being pressfit. After proper installation into a recommended housing bore, the inner diameter adjusts to meet our specified tolerances. Please adhere to the catalog specifications for housing bore and recommended shaft sizes. This will help to ensure optimal performance of iglide plain bearings. Please contact an iglide technical expert for support. Tolerance Table, Page 1.14
Installation
igubal pivoting bearings are pressfit into a recommended housing bore and axially secured. An exact orientation of the bearing housing is not necessary, since the pivoting bearing compensates for alignment errors.
32.2
Special Properties
G housing made of igumid G G spherical ball made of highly wearresistant iglide L280 G easy to install G compensation for alignment errors G universal corrosion resistance G lightweight G maintenance-free, self-lubricating
C
30
d2
d1
d2
Inch
B
Inch
C
Inch
Part No.
Housing Bore
Min Max.
Shaft Size
Min.
Tolerance Table, Page 1.14 For housing bores (H7) For shaft sizes (h7)
30
inch
mm
32.3
KGLI
Special Properties
G housing made of igumid G G standard ball made from iglide L280, other options are available G easy to install G compensation for alignment errors G universal corrosion resistance G lightweight G maintenance-free, self-lubricating
C
30
KGLM
d2
d1
d1 mm
E10
d2 mm
B mm
C mm
30
KGLM-03 KGLM-05 KGLM-06 KGLM-08 KGLM-10 KGLM-12 KGLM-14 KGLM-16 KGLM-18 KGLM-20 KGLM-22 KGLM-25 KGLM-30
119 281 393 528 798 944 1281 1686 1910 2203 2630 3057 4496
34 56 90 180 202 214 270 292 315 427 584 674 731
2.2 3.7 7.4 8.9 14.8 22.1 25.8 29.5 33.2 40.6 44.3 47.9 51.6
3 5 6 8 10 12 14 16 18 20 22 25 30
10 13 16 19 22 26 28 32 35 40 42 47 55
6 8 9 12 14 16 19 21 23 25 28 31 37
4.5 6.0 6.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 20.0 22.0 25.0
Telephone Fax
Tolerance Table, Page 1.14 For housing bores (H7) For shaft sizes (h7)
32.4
B C
d1 mm
E10
d2 mm
B mm
C mm
EGLM-04 EGLM-05 EGLM-06 EGLM-08 EGLM-10 EGLM-12 EGLM-15 EGLM-16 EGLM-17 EGLM-20 EGLM-25 EGLM-30
135 213 236 303 449 505 775 876 921 1202 1843 2472
1.5 1.5 1.8 5.2 10.3 18.4 22.1 23.6 25.8 29.5 40.6 51.6
4 5 6 8 10 12 15 16 17 20 25 30
12 14 14 16 19 22 26 28 30 35 42 47
5 6 6 8 9 10 12 13 14 16 20 22
3.0 4.0 4.0 5.0 6.0 7.0 9.0 9.5 10.0 12.0 16.0 18.0
Tolerance Table, Page 1.14 For housing bores (H7) For shaft sizes (h7)
Page 35.2
G housing made of igumid G G standard ball made from iglide L280, other options are available G easy to install G compensation for alignment errors G universal corrosion resistance G lightweight G maintenance-free, self-lubricating
Special Properties
30
d2
d1
30
inch
mm
32.5
EGLM
Special Properties
G G G G G G extremely narrow installation space load data compares with KGLM angle compensation to 5 maintenance-free corrosion-free low weight
KGLM SL
30
1-888-803-1895 1-401-438-7680
x. ma 5
D
d1 d2
C
B
Telephone Fax
Load Data
Part Number Max. static compressive strength (short term) radial axial (lbs) (lbs) 607 899 1012 1461 101 169 169 112 Max. static compressive strength (long term) radial axial (lbs) (lbs) 304 450 506 731 51 84 84 56
Dimensions (mm)
Part Number d1
E10
d2 (mm) 14 16 18 22
8 10 12 16
32.6
G standard ball made from iglide L280, other options are available G easy to fit G low Cost
B C
d2
Load Data
Part Number Max. static compressive strength (short term) radial (lbs) axial (lbs) 899 1214 1798 2248 3057 4496 315 337 674 1124 1686 2023
Dimensions (mm)
Part Number KGLM-10 LC KGLM-12 LC KGLM-16 LC KGLM-20 LC KGLM-25 LC KGLM-30 LC d1 E10 (mm) 10 12 16 20 25 30 d2 (mm) 22.0 26.0 32.0 40.0 47.0 55.0 B (mm) 14 16 21 25 31 37 C (mm) 10.5 12 15 18 22 25 f (mm) 0.8 0.8 0.8 0.8 0.8 1.0 Max. Pivot Angle 25 30 30 30 30 22
Page 35.2
d1
inch
mm
32.7
KGLM LC
Special Properties
Special Properties
igubal Spherical Bearing
G standard ball made from iglide L280, other options are available G Extremely easy installation - just clip into sheet metal G No additional axial retainer required G Extremely low installation space; space-saving thin wall design G Maintenance-free iglide spherical balls G Diameters 6 to 16 mm
ECLM
d2 b1
1-888-803-1895 1-401-438-7680
d1 d4
Dimensions (mm)
Part No. Ball Inside mm d1 5 10 10 10 12 16 Ball Width mm B 6 6 6 6 6 6 Ball Outside mm dk 12.40 12.40 12.40 12.40 14.20 18.00 Outside Flange mm d2 12 16 16 16 18 22 mm d4 13 17 17 17 19 24 Thickness Housing mm b1 4.3 4.3 4.3 4.5 4.5 4.5 Pivoting Angle Snap Groove Inner S1 Snap Groove Outer S2
Telephone Fax
Part No.
Max. Static Short Term Force Maximum Maximum Radial Axial Pressure Pressure lbs lbs 157 157 225 315 405 629 5.62 5.62 5.62 6.74 7.87 10.11
Max. Static Long Term Force Maximum Maximum Radial Axial Pressure Pressure lbs lbs 79 79 112 157 202 315 2.70 2.70 2.70 1.57 2.25 4.50
Max. Cyclic Force Maximum Maximum Radial Axial Pressure Pressure lbs lbs 47 47 67 94 121 189 1.69 1.69 1.69 2.02 2.25 3.03
Page 35.2
32.8
d1
d4
Load Data
Part Number Maximum static Compression Force (Short term) radial axial (N) (N) 2500 150 Maximum static long term Compression (Long term) radial axial (N) (N) 1250 75
ECLM-10-05 HD
Dimensions [mm]
Part Number Spherical Ball d1 E10 10,0 Spherical Ball Width B 9,0 outside d2 0.15 22,0 Collar d4 28
d1 E10
d2
ECLM-10-05 HD
Page 35.2
G standard ball made from iglide L280, other options are available G High axial and radial loads G Easily clips into sheet metal G No additional axial fastening necessary G Extremely compact design and installation G Adjustment of axial and radial clearance by pre-loading G Maintenance-free iglide spherical balls G For sheet thickness 5 mm
inch
mm
32.9
ECLM HD
Special Properties
Special Properties
igubal Pivoting Bearing
G standard ball made from iglide L280, other options are available G maintenance-free, dry-running G easy to fit G can compensate for a housing tolerance of 0.2 mm
1-888-803-1895 1-401-438-7680
EGFM
Dimensions (mm)
Part No. d1
(mm)
Telephone Fax
d2 min.
(mm)
d2 max.
(mm)
d3
(mm)
C
(mm)
B
(mm)
b2
(mm)
18 35 42 50 55
6 13 16 20 22
Load data
Internet: http://www.igus.com E-Mail: sales@igus.com QuickSpec: www.igus.com/qs/igubal.asp
Part Number Maximum static Compression Force (Short term) radial axial (lbs) (lbs) 247.3 427.1 562.0 1348.9 2023.3 3147.3 3821.8 33.7 49.5 60.7 134.9 179.8 629.5 674.4 Maximum static Compression Force (Long term) radial axial (lbs) (lbs) 123.6 213.6 281.0 674.4 1011.6 1573.7 1910.9 16.8 24.7 30.4 67.4 89.9 314.7 337.2
Page 35.2
32.10
Structure for the part numbers for igubal Double Joint bearings
The part numbers of igubal double joint bearings are designed according to the following system:
Special Properties
E GZ M - 05 - 50 G standard ball made from iglide L280, other options are available G maintenance-free, self-lubricating G mechanical joining link between 2 components G self-aligning to compensate for angular errors G corrosion-resistant G consistant movements G special lengths often possible, please contact igus
X
X
Nominal dimension of the inside diameter d1 Distance between the spherical balls (on center) X
d1
d1
Part No.
d1 mm
E10
d2 mm
X mm
b mm
a
mm
EGZM-04-25 EGZM-04-50 EGZM-04-75 EGZM-05-25 EGZM-05-50 EGZM-05-75 EGZM-06-25 EGZM-06-50 EGZM-06-75 EGZM-08-60 EGZM-08-100 EGZM-10-60 EGZM-10-100 EGZM-12-60 EGZM-12-100
247 247 247 247 247 247 247 247 247 674 674 562 562 450 450
124 124 124 124 124 124 124 124 124 337 337 281 281 225 225
292 169 112 292 169 112 292 169 112 787 427 787 427 787 427
04 04 04 05 05 05 06 06 06 08 08 10 10 12 12
20 20 20 20 20 20 20 20 20 30 30 30 30 30 30
4 4 4 4 4 4 4 4 4 7 7 7 7 7 7
10 10 10 10 10 10 10 10 10 15 15 15 15 15 15
Page 35.2
d2
d2
inch
mm
32.11
EGZM
Custom Solutions
igubal Spherical Bearing
G G G G G Custom-made igubal spherical bearings starting from medium batch sizes Short delivery times Low-cost production We can manufacture spherical balls in different iglide materials Maintenance-free
32.12
Telephone Fax
1-888-803-1895 1-401-438-7680
1-888-803-1895 1-401-438-7680
The self-adjusting igubal spherical thrust bearings are very easy to install and help to compensate for alignment errors and prevent edge loads. The housing pad is made of the impact-resistant, thermoplastic composite material igumid G. The spherical disk is made to the same standard as iglide L280 plain bearings. This combination produces especially good friction and wear properties.
Loads
The loading capacity of igubal spherical thrust bearings is very high for standard ambient temperatures. For high continuous loads and high temperatures, the loading capacity of the thrust bearings should be tested to your application requirements in an experiment that duplicates the application.
Telephone Fax
Design SA = Spherical thrust bearing Measuring System M = metric Nominal dimension of the inner diameter
The example shows a spherical thrust bearing with metric dimensions and an inner diameter of 16mm.
Installation
The housing pad is installed so that it is countersunk and secured. The spherical washer is loosely fitted in the socket and is held in place by the shaft that is placed into the bearing.
Product Range
igubal spherical thrust bearings are provided as standards in dimensions from 5 to 20 mm. Please contact us if you need other dimensions
33.2
Spherical Disk
R1 Ball
d1 d2
Ball Socket
d3 d2
Load Data
Part No. Maximum Static Axial Tensile Strength Short-term
(N)
Maximum Static Axial Tensile Strength Long-term 449 562 899 1124 1348 1910 2492
Dimensions (mm)
Part No. d1 Ball Socket
DIN 7168
d3 Spherical Disk
DIN 7168
d2
R1 Radius
Compensation Angle
TotalWeight
(g)
3 3 2 2 2 2 2
h2
mm
33.3
SAM
W E M - 12 - 10 Design Spherical Bearing material W = iglide L280 R = iglide R X = iglide T500 J = iglide J J4 = iglide J4 UW = iglide UW Dimensonal series K = K series E = E series Measuring System M = metric I = Inch Nominal inside diameter
1-888-803-1895 1-401-438-7680
Every single iglide material has its own special properties, which determines the suitability for your special applications and requirements. Today, we offer you spherical bearings from iglide materials L280 (standard), J, J4, R, UW and T500. You can find detailed information about every material in the catalog chapters, starting at page 2.1.
Special Properties:
Telephone Fax
G Maintenance-free, self-lubricating G Suitable for rotating, oscillating and linear move-
ments
G Light weight
Tolerances
The maintenance-free igubal spherical bearings have an inside diameter tolerance of E10. The shaft should be tolerated h6 to h9.
Width
34.2
+90
dK dn
dn
dK
d1
d1
0,3
30
40
30
0,3
Dimensions (inch)
igubal Spherical Balls WKI
Part No. WKI-03 WKI-04 WKI-05 WKI-06 WKI-07 WKI-08 WKI-10 WKI-12 WKI-16 d1
E10
Dimensions (inch)
igubal Spherical Balls WEI
dK .438 .516 .625 .718 .828 .938 1.125 1.312 1.750 B .312 .375 .437 .500 .562 .625 .750 .875 1.375 Part No. WEI-03 WEI-04 WEI-05 WEI-06 WEI-07 WEI-08 WEI-10 WEI-12 WEI-16 d1
E10
Dimensions (mm)
igubal Spherical Balls WKM
Part No. WKM-02-04 WKM-03-06 WKM-05-08 WKM-06-09 WKM-08-12 WKM-10-14 WKM-12-16 WKM-14-19 WKM-16-21 WKM-18-23 WKM-20-25 WKM-22-28 WKM-25-31 WKM-30-37 d1
E10
Dimensions (mm)
igubal Spherical Balls WEM
dK 5.20 7.90 11.10 12.70 15.80 19.00 22.20 25.40 28.50 31.70 34.90 38.10 42.80 51.00 B 4.00 6.00 8.00 9.00 12.00 14.00 16.00 19.00 21.00 23.00 25.00 28.00 31.00 37.00 Part No. WEM-04-05 WEM-05-06 WEM-06-06 WEM-08-08 WEM-10-09 WEM-12-10 WEM-15-12 WEM-17-14 WEM-20-16 WEM-25-20 WEM-30-22 d1
E10
dn 3.90 5.10 7.70 8.90 10.30 12.90 15.40 16.80 19.30 21.80 24.30 25.80 29.50 34.80
dn 6.25 8.00 8.00 10.00 13.00 15.00 18.00 20.00 24.00 29.00 34.00
dK 8.25 10.20 10.20 13.20 16.00 18.00 22.00 25.10 28.90 35.50 40.90
B 5.00 6.00 6.00 8.00 9.00 10.00 12.00 14.00 16.00 20.00 22.00
2.00 3.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 25.00 30.00
4.00 5.00 6.00 8.00 10.00 12.00 15.00 17.00 20.00 25.00 30.00
inch
mm
34.3
RKM/REM - XKM/XEM
+194F
dK dn
dn
dK
d1
d1
30
0,3
30
58F
0,3
1-888-803-1895 1-401-438-7680
Dimensions (Inch)
igubal Spherical Bearings REI
Part Number REI-03 REI-04 REI-05 REI-06 REI-07 REI-08 REI-10 REI-12 REI-16 d1 E10 .1900 .2500 .3125 .3750 .4275 .5000 .6250 .7500 1.0000 dn .354 .314 .415 .506 .581 .581 .802 .951 1.180 dK .402 .402 .520 .630 .709 .709 .945 1.138 1.138 B .1900 .2500 .3125 .3750 .4063 .4063 .5000 .6250 .7500
Dimensions (mm)
igubal Spherical Bearings REM
Part Number REM-05-06 REM-06-06 REM-08-08 REM-10-09 REM-12-10 d1 E10 5.00 6.00 8.00 10.00 12.00 dn 8.00 8.00 10.00 13.00 15.00 dK 10.20 10.20 13.20 16.00 18.00 B 6.00 6.00 8.00 9.00 10.00
Telephone Fax
Dimensions (mm)
igubal Spherical Bearings RKM
Part Number RKM-10-14 d1 E10 10.00 dn 12.90 dK 19.00 B 14.00
+482F
dK dn
dn
dK
d1
d1
148F
30
0,3
30
0,3
Dimensions (mm)
igubal Spherical Bearings XKM
Part Number XKM-10-04 d1 E10 10.00 dn 12.90 dK 19.00 B 14.00
Dimensions (mm)
igubal Spherical Bearings XEM
Part Number XEM-06-06 XEM-08-08 XEM-10-09 XEM-12-10 d1 E10 6.00 8.00 10.00 12.00 dn 8.00 10.00 13.00 15.00 dK 10.20 13.20 16.00 18.00 B 6.00 8.00 9.00 10.00
34.4
+194F
dK
dn
dK
d1
dn
30
d1
30
58F
0,3
0,3
Dimensions (mm)
igubal Spherical Bearings JKM
Part Number JKM-10-04 d1 E10 10.00 dn 12.90 dK 19.00 B 14.00
Dimensions (mm)
igubal Spherical Bearings JEM
Part Number JEM-04-05 JEM-05-06 JEM-06-06 JEM-08-08 JEM-10-09 JEM-12-10 JEM-15-12 JEM-16-13 JEM-17-14 JEM-20-16 JEM-25-20 JEM-30-22 d1 E10 4.00 5.00 6.00 8.00 10.00 12.00 15.00 16.00 17.00 20.00 25.00 30.00 dn 6.25 8.00 8.00 10.00 13.00 15.00 18.00 19.50 20.00 24.00 29.00 34.00 dK 8.25 10.20 10.20 13.20 16.00 18.00 22.00 24.00 25.10 28.90 35.50 40.90 B 5.00 6.00 6.00 8.00 9.00 10.00 12.00 13.00 14.00 16.00 20.00 22.00
inch
+212F
mm
30
dK
dn
d1
58F
0,3
Dimensions (mm)
igubal Spherical Bearings UWEM
Part Number UWEM-16-13 UWEM-17-14 UWEM-25-20 UWEM-30-22 d1 E10 16.00 17.00 25.00 30.00 dn 19.50 20.00 29.00 34.00 dK 24.00 25.10 35.50 40.90 B 13.00 14.00 20.00 22.00
34.5
J4VEM
+194F
)
dA
1-888-803-1895 1-401-438-7680
5 Sizes available: 8. 10. 12. combinable with: igubal Rod End Bearing igubal Rod End Bearing igubal Pillow Block Bearing igubal Flange Bearing igubal Flange Bearing igubal Pivoting Bearing igubal Pivoting Bearing igubal Double Joint
Telephone Fax
Special Properties
G G G G G
Can be combined with all housings from design range E Sizes 8 to 20 mm Pre-loaded Totally free from clearance. even in unloaded state Material: iglide J4
Dimensions (mm)
Clearance-free Spherical Bearing
Part Number J4VEM-08-08 J4VEM-10-09 J4VEM-12-10 J4VEM-16-13 J4VEM-20-16 d1 E10 8 10 12 16 20 dA 13.2 16.0 18.0 24.0 28.9 bK 8 9 10 13 16
34.6
d1
0,5 (6x
58F